+ All Categories
Home > Documents > TWIN JET - firestonebpco.comfirestonebpco.com/assets/2018/04/twin-jet-launch-notice.pdf · Twin Jet...

TWIN JET - firestonebpco.comfirestonebpco.com/assets/2018/04/twin-jet-launch-notice.pdf · Twin Jet...

Date post: 18-Oct-2018
Category:
Upload: ngonga
View: 247 times
Download: 0 times
Share this document with a friend
1
FIRESTONE BUILDING PRODUCTS 200 4TH AVENUE SOUTH NASHVILLE, TN 37201 FIRESTONEBPCO.COM 1-855-479-5589 FRANÇAIS: 1-888-292-6265 © Firestone Building Products Company, LLC. All Rights Reserved. TWIN JET Introducing Firestone Twin Jet, a 2-part, low-rise, foam adhesive, designed for attachment to polyiso insulation and most Firestone approved substrates. Twin Jet is now available through any Firestone distributor. PRODUCT INFORMATION Twin Jet is a reliable, quality adhesive solution. The pre-pressurized canisters require no special equipment, are easy-to-use, and capable of coverage up to 35 squares/set when dispensed in bead application. Twin Jet offers fast and easy set up and shut down, helping to improve rooftop productivity. Each set conveniently comes with hose/gun, mix tips, and extension tubes. BENEFITS Coverage rate up to 3,500 sqft. per kit (12” OC ribbon spacing). Fast and easy set up and shut down. No additional equipment or power needed. Applied in pre-foamed beads that quickly rise to approximately 1-inch above the substrate. PRODUCT DETAILS Opened canisters may be used for up to 30 days. Store at room temperature (60°– 90°F / 16°– 32°C) in a dry area. Do not expose products to open flame or temperatures above 100°F (38°C). Cylinders and contents must be brought to between 70°– 90°F (21°– 32°C) for use. Product is “pre-foamed” when it’s dispensed. Bead width will be larger when compared to a cartridge or bag-in-box application. Designed for use in temperatures of 40°F to 100°F (4°C to 38°C), and with 4-ft. x 4-ft. (maximum) for most insulation boards. Not approved for spatter application or membrane attachment. PART NUMBERS W56RACIAPC1 Twin Jet Part 1 W56RACIAPC2 Twin Jet Part 2 Each set comes with hose/gun, mix tips, and extension tubes, but supplemental materials are available for order: W56RACIAPRK Additional hose and gun W56RACIAPRT Additional Mixing Tips (10) W56RACIAPRE Additional Extension Tubes (10) For additional product information, please refer to the Technical Information Sheet and Safety Data Sheet.
Transcript

FIRESTONE BUILDING PRODUCTS 200 4TH AVENUE SOUTHNASHVILLE, TN 37201

FIRESTONEBPCO.COM 1-855-479-5589FRANÇAIS: 1-888-292-6265

© Firestone Building Products Company, LLC. All Rights Reserved.

TWIN JETIntroducing Firestone Twin Jet, a 2-part, low-rise, foam adhesive, designed for attachment to polyiso insulation and most Firestone approved substrates. Twin Jet is now available through any Firestone distributor.

PRODUCT INFORMATION

Twin Jet is a reliable, quality adhesive solution. The pre-pressurized canisters require no special equipment, are easy-to-use, and capable of coverage up to 35 squares/set when dispensed in bead application. Twin Jet offers fast and easy set up and shut down, helping to improve rooftop productivity. Each set conveniently comes with hose/gun, mix tips, and extension tubes.

BENEFITS

• Coverage rate up to 3,500 sqft. per kit (12” OC ribbon spacing).• Fast and easy set up and shut down.• No additional equipment or power needed.• Applied in pre-foamed beads that quickly rise to approximately 1-inch

above the substrate.

PRODUCT DETAILS

• Opened canisters may be used for up to 30 days.• Store at room temperature (60°– 90°F / 16°– 32°C) in a dry area. • Do not expose products to open flame or temperatures above 100°F (38°C).• Cylinders and contents must be brought to between 70°– 90°F (21°– 32°C) for use. • Product is “pre-foamed” when it’s dispensed. Bead width will be larger when compared to a cartridge or bag-in-box

application. • Designed for use in temperatures of 40°F to 100°F (4°C to 38°C), and with 4-ft. x 4-ft. (maximum) for most insulation boards.• Not approved for spatter application or membrane attachment.

PART NUMBERS

• W56RACIAPC1 Twin Jet Part 1• W56RACIAPC2 Twin Jet Part 2

Each set comes with hose/gun, mix tips, and extension tubes, but supplemental materials are available for order:• W56RACIAPRK Additional hose and gun• W56RACIAPRT Additional Mixing Tips (10)• W56RACIAPRE Additional Extension Tubes (10)

For additional product information, please refer to the Technical Information Sheet and Safety Data Sheet.

Recommended