Type A-K (Main campus, NSC)
0.900.89
0.890.88
0.880.87
0.86 0.86
0.850.84
0.84
0.890.88
0.870.87
0.860.85
0.84 0.84
0.83
0.820.81
0.870.86
0.86
0.85
0.84
0.83
0.82 0.81
0.81
0.800.79
0.86
0.85
0.84
0.83
0.82
0.81
0.800.79
0.78
0.77
0.77
0.84
0.83
0.83
0.82
0.81
0.80
0.780.77
0.76
0.75
0.74
0.83
0.82
0.81
0.80
0.79
0.78
0.770.75
0.74
0.73
0.72
0.70
0.75
0.80
0.85
0.90
0.95
5 10 15 20 25 30 35 40 45 50 55
50K
60K70K
80K
90K100K
Ambient Temp ( C )
LLD
LLD vs Ambient Temperature
(MGLED 9 COB @ 1000mA)
Ambient Temp ( C )
LLD
LLD vs Ambient Temperature
(MGLED 9 COB @ 1000mA)
P R O D U C T O V E R V I E W
Applications:Residential streetsParking lotsGeneral security lighting
Autobahn Series ATBSRoadway & Security Lighting
DIMENSIONS
Features:OPTICAL
Same Light: Performance is comparable to 50W – 150W HPS and up to 175W Mercury Vapor roadway and security lighting luminaires.
White Light: Correlated color temperature - standard 4000K, 70 CRI minimum or optional 5000K, 70 CRI minimum.
IP66 rated borosilicate glass optics ensure longevity and minimize dirt depre-ciation. Unique IP66 rated LED light engines provide 0% uplight and restrict backlight to within sidewalk depth, providing optimal application coverage and optimal pole spacing.
Available distributions are Type II, III, and V roadway distributions. When used with the optional acrylic refractor the unit provides approximately 10% uplight and increased vertical foot-candles
ELECTRICAL
Expected Life: LED light engines are rated >100,000 hours at 25°C, L70.Electronic driver has an expected life of 100,000 hours at a 25°C ambient.
Lower Energy: Saves an expected 40-60% over comparable HID luminaires.
Robust Surge Protection: Three different surge protection options provide a minimum of IEEE/ANSI C62.41 Category C (10kV/5kA) protection.
MECHANICAL
Includes standard AEL lineman-friendly features such as tool-less entry, 3 station terminal block and quick disconnects. Bubble level located inside the electrical compartment for easy leveling at installation.
Rugged die-cast aluminum housing and door are polyester powder-coated for durability and corrosion resistance. Rigorous five-stage pre-treating and painting process yields a finish that achieves a scribe creepage rating of 8 (per ASTM D1654) after over 5000 hours exposure to salt fog chamber (oper-ated per ASTM B117).
Mast arm mount is adjustable for arms from 1-1/4” to 2” (1-5/8” to 2-3/8” O.D.) diameter. The 2 – bolt clamping mechanism provides 3G vibration rating per ANSI C136.
The Wildlife shield is cast into the housing (not a separate piece).
CONTROLS
NEMA 3 pin photocontrol receptacle is standard, with the Acuity designed ANSI standard 5 pin and 7 pin receptacles optionally available.
Premium solid state locking-style photocontrol – PCSS (10 year rated life) Extreme long life solid state locking-style photocontrol – PCL1 (20 year rated life)
Optional onboard Adjustable Output module allows the light output and input wattage to be modified to meet site specific requirements, and also can allow a single fixture to be flexibly applied in many different applications.
WARRANTY & STANDARDS
5 year limited warranty. Full warranty terms located at http://www.acuity-brands.com/Libraries/Terms_and_Conds/ABL_LED_Commerical_Outdoor.sflb.ashxRated for -40°C to 40°C ambientCSA Certified to U.S. and Canadian standardsComplies with ANSI: C136.2, C136.10, C136.14, C136.31, C136.15, C136.37Note: Specifications subject to change without notice. Actual performance may differ as
a result of end-user environment and application.
23.75”
7.5”
4.5”
11”
Drop Refractor
Effective Projected Area (EPA) The EPA for the ATBS is 0.6 sq. ft.,Approx. Wt. = 12 lbs. (5 kg)
Type L and M (Residence , Parking Lot B Pathway)
American Electric LightingAcuity Brands Lighting, Inc.3825 Columbus Rd, S.w.,Granville, OH 43023Phone: 800-537-5710 Fax: 740-587-6114www.americanelectriclighting.com
Example: ATBS A MVOLT R2
Note: Specifications subject to change without notice. Actual performance may differ as a result of end-user environment and application.
ATBS Autobahn LED Roadway &
Security
MVOLT Multi-volt, 120-277VA 1,800 lumensB 2,400 lumensE 4,000 lumensF 4,600 lumensG 5,600 lumensH 6,300 lumens
Color Temperature (CCT) (Blank) 4000K CCT, 70 CRI Min. (standard)
5K 5000K CCT, 70 CRI Min.
Paint Blank Gray (Standard)
BK BlackWH WhiteBZ Bronze
Surge Protection Blank Acuity SPD-10kV/5kA with
inductive filter (Standard)MP MOV Pack
IL SPD with Indicator Light
Misc. HSS House Side Shield
NL NEMA LabelXL Not CSA Certified
Options
Controls (Blank) 3 Pin NEMA Photocontrol Receptacle
NR2 No Photocontrol ReceptacleDM 0V-10V Dimmable Driver P5 5 Pin Photocontrol Receptacle
(dimmable driver included)P7 7 Pin Photocontrol Receptacle
(dimmable driver included) PCSS1 DTL DSS Photocontrol PCL11 DTL DLL Photocontrol 120-277V
AO Field Adjustable OutputSH2 Shorting Cap
Install Packages PKGS DTL DSS Photocontrol PKGL DTL DLL Photocontrol Packages ship with selected photocontrol, 24”, 1 1/4” diameter arm, 5’ of prewire and mounting hardware
R2 Roadway Type IIR3 Roadway Type IIIR5 Roadway Type VD2 Type II, Drop Refractor
included D3 Type III, Drop Refractor
included D5 Type V, Drop Refractor
included
OpticsVoltagePerformance Packages Series
Autobahn Series ATBSRoadway & Security Lighting
O R D E R I N G I N F O R M A T I O N
©2014 Acuity Brands Lighting, Inc. 5/14
Notes 1. Not available with Install Packages.
Accessories ATBSREF Drop Refractor for
field installationATBSHSS House Side Shield for
field installationATBSLTS Light Trespass Shield for
field installation
Type N, O, P, and Q (NSC, Admin, Residence, Power Plant, Conference Centre)
MATERIAL: STEELFINISH: RAL 6009QTY REQD: 7 PCS.
N.T.S DATE:SCALE:DRAWING NUMBER:
APPROVED BY:REVISED:DRAWN BY:
DRAWN FOR:
DRAWING TITLE:
A DIVISION OF DYNAMETAL INDUSTRIES LIMITED
DYNAPOLEw w w. d y n a p o l e. c o m
2425 LUCKNOW DRIVE,MISSISSAUGA ON L5S 1H1
Tel. (905)671-1507 Fax (905)671-4606Toll-Free: 1-877-DYNAPOLE
STEEL FIXTURE BRACKET - HOLOPHANE DRILL PATTERN "W"
ACUITY BRANDS
PS
5 AUG 15
6143
78
1586
124
Ø34
(2)Ø7
16
114" SCHED 40 PIPE (0.154" WALL)
THIS DRAWING / SPECIFICATIONIS ISSUED ON CONDITION THATIT IS NOT COPIED, REPRINTEDOR DISCLOSED TO A THIRDPARTY WITHOUT THE WRITTENCONSENT OF DYNAPOLE.
Dynapole 1For Type M Fixture(Residence 1 Pathway)
MATERIAL: STEELFINISH: RAL 6009QTY REQD: 5 PCS.
N.T.S DATE:SCALE:DRAWING NUMBER:
APPROVED BY:REVISED:DRAWN BY:
DRAWN FOR:
DRAWING TITLE:
A DIVISION OF DYNAMETAL INDUSTRIES LIMITED
DYNAPOLEw w w. d y n a p o l e. c o m
2425 LUCKNOW DRIVE,MISSISSAUGA ON L5S 1H1
Tel. (905)671-1507 Fax (905)671-4606Toll-Free: 1-877-DYNAPOLE
STEEL FIXTURE BRACKET
ACUITY BRANDS
PS
5 AUG 15
77
16
12 3
5
212" SCHED 40 (27
8" OD x 9" LONG)
114" SCHED 40 PIPE (15
8" OD)
(6) 38" x 58" LONG SET SCREWS @ 120°
THIS DRAWING /SPECIFICATION IS ISSUED ONCONDITION THAT IT IS NOTCOPIED, REPRINTED ORDISCLOSED TO A THIRD PARTYWITHOUT THE WRITTENCONSENT OF DYNAPOLE.
TOP CAP
6
Dynapole 2For Type M Fixture(Residence 2 Pathway)
MATERIAL: STEELFINISH: RAL 6009QTY REQD: 11 PCS.
N.T.S DATE:SCALE:DRAWING NUMBER:
APPROVED BY:REVISED:DRAWN BY:
DRAWN FOR:
DRAWING TITLE:
A DIVISION OF DYNAMETAL INDUSTRIES LIMITED
DYNAPOLEw w w. d y n a p o l e. c o m
2425 LUCKNOW DRIVE,MISSISSAUGA ON L5S 1H1
Tel. (905)671-1507 Fax (905)671-4606Toll-Free: 1-877-DYNAPOLE
STEEL FIXTURE BRACKET - HOLOPHANE DRILL PATTERN "W"
ACUITY BRANDS
PS
5 AUG 15
6143
78
1586
123
12Ø
34
(2)Ø7
16
114" SCHED 40 PIPE (0.154" WALL)
THIS DRAWING / SPECIFICATIONIS ISSUED ON CONDITION THATIT IS NOT COPIED, REPRINTEDOR DISCLOSED TO A THIRDPARTY WITHOUT THE WRITTENCONSENT OF DYNAPOLE.
Dynapole 3For Type L Fixture(Parking Lot B Pathway)
MATERIAL: STEELFINISH: RAL 6009QTY REQD: ___ PCS.
N.T.S DATE:SCALE:DRAWING NUMBER:
APPROVED BY:REVISED:DRAWN BY:
DRAWN FOR:
DRAWING TITLE:
A DIVISION OF DYNAMETAL INDUSTRIES LIMITED
DYNAPOLEw w w. d y n a p o l e. c o m
2425 LUCKNOW DRIVE,MISSISSAUGA ON L5S 1H1
Tel. (905)671-1507 Fax (905)671-4606Toll-Free: 1-877-DYNAPOLE
STEEL FIXTURE BRACKET
ACUITY BRANDS
PS
5 AUG 15
137
16
12 3
5
212" SCHED 40 (27
8" OD x 9" LONG)
THIS DRAWING /SPECIFICATION IS ISSUED ONCONDITION THAT IT IS NOTCOPIED, REPRINTED ORDISCLOSED TO A THIRD PARTYWITHOUT THE WRITTENCONSENT OF DYNAPOLE.
2" SCHED 40 PIPE (238" OD)
12
TOP CAP
(6) 38" x 58" LONG SET SCREWS @ 120°
Dynapole 4For Type E Fixture(Parking Lot A & B)
4
142 | OUTDOOR | INFRASTRUCTURE | Floodlighting | Brackets & Mounting Hardware www.holophane.com
���������
����
������� �����������������
�����
����������������
��
������������� ��������������
�� �
��
��� �
���������
����
���������$� ���$!���$� �������� �������� ��
!�"#����� �������������� ��������������������$
������������������������ ������� �!"��#���
������������� ������������
����
�� �����������������
�� ������������ �" �!$
�� �����������������
�� ����������
�� ��������� �������
�� �$"�����
�����
���
�����
�� �
����������
������������������������ ������� �!"��#���
������������������ ������������
����
�� �����������������
�� ������������ �" �!$
�� �����������������
�� ����������
�� ��������� �������
�� �$"�����
�����
���
�����
�� �
�����
�� �����������������
���������������
�����
���
������������������ ��������������
�����
�� �����������������
���������������
��
���
����!������������� ��������������
������
���
��
����#�����%$� ��������
�� �����������������
�� �����������������
� �����������������
����������
����������
��� �������
��
�� �����
������%$ "!�#
��
����������
�� �����������������
�� �����������������
� �����������������
����������
����������
���
���
����"�����%$� �������� "!�#��&���������������'����
�������������
���
�����
�����
��%$�������������� �����������������������#��� ���������������������� ����������������
%����� �� �����$��!�
�������������������
&� �$"������ �'����� ������ (
���
��%$�������������� ������������������� ���#��� ���������������������� ����������������
&� �$"������ �'����� � (
%���� �� �����$��!�
�������������������
�
��
�� �����������������
�� �����������������
� �����������������
����������
����������
���
���
�������������
���
�����
�����
���
��
����(�����%$� ��������
&� �$"������ �'����� ������ (
%����� �� �����$��!�
�������������������
�
��
��%$�������������� �������������������!���#��� �����������������#���� ����������������
��%$�������������� �����������������������#��� ���������������������� ����������������
&� �$"������ �'����� ������ (
%����� �� �����$��!�
�������������������
�
��
���) ������� ������� ������°
��
��������������
��
�)��$�������������������"�����*"�����������(����������
��
*�(�'�#�����
�
���) ������� ������� ������°
����������������
��,��,�"���+���!#�$"
���
���
����
� �
��
�����"����)�&������$����������������*"������
FLOODLIGHTING
Brackets and Mounting Hardwarefor use with Predator, Prismbeam II, or Vector Luminaires
BKT-5-HGFor Type B and D(Parking Lot C and Daycare South Parking Lot)
Catalog Number
Notes Type
1 of 1One Lithonia Way Conyers, GA 30012 Phone: 800-442-6745 www.roamservices.net ©2012 Acuity Brands Lighting, Inc. All rights reserved 08/09/12
ROAM Enabled Node
REN127 NM1
4.36"
3.95"
3.16"
This drawing, when approved, shall become the complete specification for the material to be furnished by ROAM on the order noted above. A unit of similar design may be supplied, but only after approval by the customer in writing. This print is the property of ROAM and is loaned subject to return upon demand and upon express condition that it will not be used directly or indirectly in any way detrimental to our interests, and only in connection with material furnished by ROAM. Specifications subject to change without notice. Actual performance may differ as a result of end-user environment or application. Limited warranty located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Sheet#: REN127NM1
ROAM DIAGNOSTICS OVERVIEW •Fixture malfunction (lamp, ballast or starter failure)•Cycling•Daybumer•No report (communication, power or equipment failure)•Unspecified malfunction•Power (power, KWH, voltage or power quality alerts)
ROAM NODE FEATURESWIRELESS ENABLED COMMUNICATION•2.4GHz -IEEE 802.15.4 compatible•FCC part 15 approved•Range - 1,000 foot clear line of sight
WIRELESS CONTROL•Remote on/off control•Grouped scheduling (energy savings)
PHOTOCONTROL•70–1,000 watt fixtures; Voltage 100–305VAC 60Hz•320J MOV - 6500 amp surge protection•Average Power consumption 1.6 watts•Maximum Power consumption: 2.2 watts•Complies with ANSI C136.10 and FCC part 15•-40 to +85°C ambient; up to 90° interface per ANSI; Base rated at 120°C•ANSI- standard 2.5-5 second turn off/on delay•Acrylic window, brass legs, black polypropylene cover, neoprene gasket•Filtered silicon light sensor•Optical indicator to alert line crew of problem or malfunction
ORDERING LOGIC
Model & Voltage Job Packs
REN127 NM1 BlankJ50
120/240/277 V(100–305)
1 Unit50 Units
Example: REN127 NM1 J50REN127 NM1V J50*
*For ROAMview™ add “V” to the end of the standardcatalog number. See example above.
Black Polypropylene Cover
Acrylic Window
Brass Legs
For Types A-M
14
Installing the Nodes1. Record the MacID of the node and DCM (if utilizing dimming fixtures) on the Installation Worksheet along with the pole/fixture identifier and other required fixture attributes (i.e., lamp type, wattage, etc.).2. Install the node on the photocell receptacle by fully seating the node prongs into the receptacle and giving it a slight clockwise twist to lock it into place. If your fixtures do not have these receptacles, a retro-fit kit can be ordered from Acuity Brands.3. Observe the two LED indicators inside the photocell window on the node and verify the following sequence: a. Both lights will light for about 4 seconds. b. Both lights will turn off for about 1 second. c. The green LED will blink slowly indicating it’s looking for a Gateway.4. Cover the photocell window to confirm the fixture illuminates. a. By default, nodes will operate as a photocontrol, whether they’re communicating with the Gateway and ROAMview Server or not. There is no disruption to the controls system or fixture operation if nodes are installed prior to the ROAMview Server and Gateway. 5. Group controls (strings of fixtures controlled by an external timer, photocontrol, etc.) affect the reporting, commands and network formation of ROAMview. Therefore, ROAM recommends all group controls be removed when using the system.