color consistency 3-step MacAdam Ellipse / CRI typical 84
lifetime > 60,000 hours / L70 or better
input voltage 24V DC
power consumption UL-1: 5W UL-2: 8W UL-3: 15W
dimensions [ L x W x H ] A x 1.3 in x 0.3 in
weight 0.25 lbs
housing extruded anodized aluminum
lens clear polycarbonate or white, opal polycarbonate
mounting surface mount bracket with clips
operating temperature -20°C to 40°C
junction temperature 62°C @ TA 25°C
power supply Class 2 36W PPS / 50W 24V DC (2 Amps) / 100W 24V DC (4.1 Amps)
interface Dimmable 0-10V
certification ETL / cETL / CE
standards UL-Class II / CE Class III / IES LM-79 / LM-80
environment dry, interior location / IP20
warranty 3 year limited warranty (refer to website for details)Due to continuous development and improvements, specifications are subject to change without notice.
The UNDERLINE is an ultra thin profile undercabinet luminaire. UNDERLINE comes in a 12 in, 20 in, or 39 in lengths and 3000K or 4000K color temperatures. The housing is constructed of extruded anodized aluminum and rated IP20 for interior use only. Availible 0-10V Dimming.
UNL
model length color temperature options
UNL UNDERLINE 1 300mm [ 12 in ] 3K 3000K WL White Lens
The following table illustrates how many fixtures each listed power supply can power.
The following table illustrates how many fixtures each listed power supply can power.
SAFETY INFORMATIONThe UNDERLINE is for indoor use only.The LED module is not protected against short circuits, overload or overheating. Therefore you must use an electronically stabilized power supply that offers protection against the previously mentioned safety risks. Our power supplies are specifically designed with protection features for safe operation. If a non Solid State Luminaires power supply is used to power the fixtures, the following basic safety features are required: Short Circuit Protection, Overload Protection, and Overheat Protection.
HARD WIRE POWER SUPPLY
80mm [ 3 in ]40mm [ 1.5 in ]
32mm [ 1 in ] 32mm [ 1 in ]
15mm [ 0.5 in ]15mm [ 0.5 in ]
PS Connection PS Connection
4-Way Splitter (2 ea. side–Total of 4) 8-Way Splitter (4 ea. side–Total of 8)
Operating Temperature : -20°C to 40°CInstallation : 2 M3.0x10 screws make it easy to install Input voltage : DC24V Output voltage : DC24V Bearing power(max) : 36W
Functional information1. Automatic inductive function: when people enter the inductor’s effective zone, the Motion Detector
will sense activity and lights turn on.
2. Delay closing function: when people leave the inductive zone or people are in the state of rest, the Motion Detector will prolong 30 seconds (time setting is adjustable) and turn lights off.
3. Continuous induction mode: while people are in motion during this setting, the Motion Detector will sense this and the light remains on.
4. The sensitive scope is less than 120 degrees, and the maximum sensitive distance is 2 meters.
Motion Dectector install positions:
Note: this picture shows that the Motion Detector can be installed in different positions, and then the effective zone is different. You may choose correct mounting position according to your purpose.
![Ouray 400 Sistema [U4] Selux · U4-#2. U4-#3. U4-#4 U4-Fixture # Series Optics. Mounting Light. Options. Engine. Rivnut. Pairs RN Fixture # CCT Finish. Voltage *Refer to chart on](https://static.documents.pub/doc/80x56/5f94b53bcc58146dfa1c1ffc/ouray-400-sistema-u4-selux-u4-2-u4-3-u4-4-u4-fixture-series-optics-mounting.jpg)
