CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com Type 550 105 °C High Ripple, Long-life, Inverter Grade, Aluminum High Ripple, Long Life, Computer Grade High Value, High Ripple Current Type 550 is the original Inverter Grade capacitor for continuous operation at up to 105 °C and it now is available in low voltages too. For best value its load life test is 2000 hours instead of the 5000 hours of the Type 550C. While less than half the life capability of the Type 550C, it is lower cost and easily lasts more than 10 years in typical industrial applications. Highlights • 2,000 hour load life • Ripple current to >50 amps • ESRs to 2.5 mΩ Specifications Operating Temperature: Rated Voltage: Capacitance: Capacitance Tolerance: DCLeakage Current: Ripple Current Multipliers: –40 °C to +105 °C 6.3 to 450 Vdc 90 µF to 1.5 F Vdc ≤ 150 V: –10 +75%, Vdc > 150 V: –10 +50% ≤3√CV µA (4 mA max.) Load Life: Shelf Life: Vibration: 2,000 h at full load @ 105 °C 500 h @ 105 °C, Capacitance, ESR and DCL, initial requirements. 0 to 55 Hz, 0.06” and 10 g max, 1.5 h each of 2 axis 50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz @ up 1⅜ and 2 inch diameter ≤ 50 V 0.77 0.85 1.00 1.05 1.08 1.08 1.08 51–299 V 0.75 0.83 1.00 1.15 1.20 1.20 1.20 ≥300 V 0.72 0.80 1.00 1.30 1.40 1.40 1.40 2½ and 3 inch diameter ≤ 50 V 0.81 0.90 1.00 1.02 1.02 1.02 1.02 51–299 V 0.81 0.90 1.00 1.07 1.07 1.07 1.07 ≥300 V 0.72 0.80 1.00 1.25 1.35 1.35 1.35 45 °C 55 °C 65 °C 75 °C 85 °C 95 ºC 105 ºC 1.73 1.58 1.41 1.22 1.00 0.71 0.57 Ambient Temperature Frequency RoHS Compliant click here to see hardware and mounting options
Type 550 105 °C High Ripple, Long-life, Inverter Grade, AluminumHigh Ripple, Long Life, Computer Grade
High Value, High Ripple CurrentType 550 is the original Inverter Grade capacitor for continuous operation at up to 105 °C and it now is available in low voltages too. For best value its load life test is 2000 hours instead of the 5000 hours of the Type 550C. While less than half the life capability of the Type 550C, it is lower cost and easily lasts more than 10 years in typical industrial applications. Highlights
• 2,000 hour load life• Ripple current to >50 amps• ESRs to 2.5 mΩ
SpecificationsOperating Temperature:
Rated Voltage: Capacitance:
Capacitance Tolerance: DCLeakage Current:
Ripple Current Multipliers:
–40 °C to +105 °C6.3 to 450 Vdc90 µF to 1.5 FVdc ≤ 150 V: –10 +75%, Vdc > 150 V: –10 +50% ≤3√CV µA (4 mA max.)
Load Life:
Shelf Life:
Vibration:
2,000 h at full load @ 105 °C
500 h @ 105 °C, Capacitance, ESR and DCL, initialrequirements.0 to 55 Hz, 0.06” and 10 g max, 1.5 h each of 2 axis
50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz10 kHz @ up
1⅜ and 2 inch diameter≤ 50 V 0.77 0.85 1.00 1.05 1.08 1.08 1.08
51–299 V 0.75 0.83 1.00 1.15 1.20 1.20 1.20≥300 V 0.72 0.80 1.00 1.30 1.40 1.40 1.40
2½ and 3 inch diameter≤ 50 V 0.81 0.90 1.00 1.02 1.02 1.02 1.02
51–299 V 0.81 0.90 1.00 1.07 1.07 1.07 1.07≥300 V 0.72 0.80 1.00 1.25 1.35 1.35 1.35
45 °C 55 °C 65 °C 75 °C 85 °C 95 ºC 105 ºC1.73 1.58 1.41 1.22 1.00 0.71 0.57
NOTE:With the stud-mount fea-ture, a thermally-conductive disk can be inserted in the bottom flush with the outer insulating sleeve.This reduces the thermal resistance through the can bottom by 0.3 °C/W. Can Style P.
Type 550 105 °C High Ripple, Long-life, Inverter Grade, AluminumNotice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information con-tained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guaran-tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi-cated in such warnings, cautions and notes, or that other safety measures may not be required.
