Type CNPUL/CSA, Flexible Liquid-Tight non-metallic Conduitfor Applications Where Abrasion, Physical Abuse orConstant Flexing Are a Factor

Type CNPOrange or Gray Non-metallicliquid-tight Conduit

Electrical Inside Diameter

Trade Size (Inches)(Inches) min max

3/8

1/2

3/4

1

1-1/4

1-1/2

2

Note:

.485

.620

.815

1.030

1.370

1.585

2.045

. Special colors ;

.505

.640

.835

1.055

1.395

1.620

2.080

v;lil;ll)le up<

Outside Diameter(Inches)

min max

.755

.910

1.150

1.415

1.800

2.045

2.605

>n request.

.775

.930

1.170

1.440

1.825

2.080

2.640

2. For »T;iv,

Approx.InsideBendDiam.(Inches)

5

6

8

12

14

16

18

clv.mi>e 3rd

Approx.

P i n n ^ma^ ^arton Standard CartonHer wo Length NAED Lmgth NAto

teet (feet) PIN (feet) PIN

15# 100/38602

21# 100/38612

30# 100/38622

43#

58#

81#

122#

number in \.\F.I) code to

250/38601

200/38611

175/38621

100/38631

50/38641

50/38651

50/38661

"S".

ReelsLength N A E D(feet) PIN

800/38604

500/38614

400/38624

300/38634

TYPICAL SPECIFICATION

Conduit shall be Anaconda Sealtite" Type CNP. Conduit shall be constructed of smooth inner thermoplastic PVC core with outer oil-resistant and sunlight-resistant PVCcover. Conduit shall have nylon reinforcing layer between the core and outer cover. Conduit shall be assembled with approved fittings to provide liquid-tight racewayfor wiring. Conduit shall be UL listed and CSA certified as a Type "A" non-metallic conduit and be used in applications requiring a temperature range of -4°F to +140°F(-20°C to +60°C).

Anaconda Sealtite® Type CNP

Nylon Reinforced

• Flexible, but tough; crush, abrasion, and strain resistant.

• Constructed of smooth inner thermoplastic PVC core withouter oil-resistant PVC cover bonded together with nylonreinforcing braid.

• Durable outer sunlight-resistant cover.

• Approved for both exposed and concealed locations.

• UL STD #1660 Type A conduit, File No. E-75863, CSAStandard C22.2, File No. LL15275-10, NEC Article 351B.

• Rated for temperature range of -4°F to +140°F (-20°Cto +60°C).

• UL listed in both orange and gray colors.

• Available in a full range of trade sizes from 3/8" to 2".

• Uses Type A connectors.

ANAMET Electrical, Inc.

LIQUID-TIGHT NON-METALLIC

CNP Smooth Inner CoreNylon Braided ReinforcementRugged Outer JacketSize Range: 3/8" - 2"UL Listed &CSA ApprovedOrange or Gray

NMUA Smooth Inner CorePolyvinyl Chloride CoverSize Range: 3/8"-2"UL Listed

Where Abrasion or Physical Abuseare Factors, Constant Flexing or MovementTemperature Range: -4° F to +140° F(-20° C to+60° C)

General PurposeNon-Metallic—Smooth Inner/Outer WallTemperature Range: -17° F to +167° F(-27° C to +75° C)

CNP-Extra Flexible

PAGE 21

NMUA-Underwriters Approved

PAGE 20

UNJACKETED CONDUIT

DE-710 Galvanized SteelUnpackedSize Range: 5/16"-9/16"UL Recognized

DSL

RWA

SPECIAL

Galvanized SteelUnpackedSize Range: 3/16"-3/4"

RWS Interlocked Zinc CoatedStrip SteelSize Range: 3/8" - 2"UL Listed

Lightweight AluminumSmooth Inside and OutsideSize Range: 3/8"-2"

Extra FlexibleExtra Strength+450°F Maximum Temperature

Ideal for Applications Where TightBends Are Required. Easily Installedfor Mechanical Protection+450° F Maximum Temperature

Flexible With High Crush ResistanceMeets Requirements of UL#350+450° F Maximum Temperature

Small Bend Radius for Tight Installations.Meets Requirements of UL#350+500° F Maximum Temperature

DE-710-UnderwritersRecognized

PAGE 22

DSL

PAGE 23

RWS-Greenfield

PAGE 24

RWA-Greenfield

PAGE 25

SHIELDTTTE® Special Bronze Core WithSpecial Polyvinyl Chloride CoverSize Range: 3/8" - 4"Military Standard: MIL-STD1310DGray

NWC

FIRETECH1

For High Level RFI and EMI ShieldingTemperature Range: -51° F to +221° F(-46°Cto+105°C)

Heavy Galvanized Steel CoreRadiation Resistant Cover WithGround Wire Through 1 1/4"Size Range: 3/8"-4"Black

Nuclear Application or Wherever RadiationProtection is NecessaryTemperature Range: -40° F to +192° F(-40° C to +89 ° C)

SHIELDTITE- EMI/RFI

PAGE 27

NWC-NuclearConduit

PAGE 26

FireTech™ Sleeve FireTech™ is the perfect insulator in steel mills, glass manufactures, and other places where_. _ .TM ... conduit is exposed to fire, heat, and molten splash. Built from high-bulk fiberglass and coated with a thickPireTecn wrap coverjng Of jron Q^e re(j Sj|jcone rubber, FireTech™ can take continuous exposure toFireTech™ Tape temperatures of 500° F and shed molten metal slag as hot as 3,000° F.FireTech™ Sheet

PAGES 28-29