Regolo 2 Grid Series Nulite Lighting 10770 East 51st Avenue, Denver, CO 80239 Phone 303-287-9646 Fax 303-287-0316 www.nulite-lighting.com Description: TM Construction: The housing consists of visible extruded alu- minum trim rails with formed cold rolled steel back channel and heavy gauge end caps. Steel alignment tabs and white snap-in joiner clips are used for continuous row applications. Luminaire is finished textured white. Reflector / Ballast: Reflector / ballast cover is finished with high reflectance white paint. Standard electronic, Class P, ballast. Universal (UNV) voltage ballast is from 120 - 277V. Shielding: Extruded frosted acrylic or satin white acrylic snap-in lens with DR or semi-specular cross blade baffle. Lamping: 1 lamp cross-section T5, T5HO or T8. Luminaire can be ordered with lamps, consult factory. Mounting: Grid ceiling types. Non-IC rated. Individual mount or continuous runs. Labels: UL / cUL listed, Non-IC rated for Damp location. The Nulite Regolo RG2 series is a narrow recessed, nominal 2” wide profile, slot unit designed for grid ceilings. The slender design is ideal for corridors, open and private offices, class- rooms, lobbies and general purpose rooms. Specifications: Ordering Information Sample: RG2-1T5-N-277-PSN-1C-STR-20’ Series Length Voltage RG2 (Grid - Nom. 2”) Lamp UNV 120 277 347 1 2’ 3’ 4’ 5’ 6’ 7’ 8’ 1T5 1T5HO 1T8 Ballast Notes: 1. Consult factory. 2. Not available in all options, consult factory. 3. Specific voltage must be ordered for this option. 4. Not available with luminous end drop lens. 2017 Rev. D1 Specifications and dimensions are subject to change without notification. Specification sheets on our website supersede all other versions. Nulite reserves the right to bulk package any order. Continuous Runs XX’ Specify run length in 1’ increment for non-staggered Staggered N (Non-staggered) Shielding / Position Circuit 1C Single Circuit 1E Single Circuit w/ EM Circuit 1B 3 Single Circuit w/ Battery Pack FR (Frosted) ST (Satin white) SB (Semi-spec Blade) IS (Standard) PS HEIS HEPS N Normal (Standard) L Low H High DIM 1 Dimming SD 1 Step Dimming T8 Options PS (Standard) HEPS 1 T5 / T5HO All Lamp Dimming Options Ballast Factor IS=Instant Start PS=Program Start HEIS=High Efficiency Instant Start HEPS=High Efficiency Program Start Ballast Factor N Normal Options GLR Fusing FLEX 6’ of Flex OS Occupancy Sensor at end of run / unit DS 4 Daylight Sensor at end of run / unit RG2 B (Baffle Flush) F (Flush Lens) R (Regressed Lens) D (Opaque Ends Drop Lens) L (Luminous Ends Drop Lens) Available in ed Technology 2” [51mm] 2-1/2” [64mm] 5-1/2” [140mm] 3” [76mm] Grid on-center Screw Slot 1” Tee Flush Lens Cross Blade Baffle 1/2” Regressed Lens 1/2” Drop Lens Project: Qty: Catalog #: Date: Type:
Transcript
Regolo 2 Grid Series
Nulite Lighting 10770 East 51st Avenue, Denver, CO 80239 Phone 303-287-9646 Fax 303-287-0316 www.nulite-lighting.com
Description:
TM
Construction: The housing consists of visible extruded alu-minum trim rails with formed cold rolled steel back channel and heavy gauge end caps. Steel alignment tabs and white snap-in joiner clips are used for continuous row applications. Luminaire is finished textured white. Reflector / Ballast: Reflector / ballast cover is finished with high reflectance white paint. Standard electronic, Class P, ballast. Universal (UNV) voltage ballast is from 120 - 277V.
Shielding: Extruded frosted acrylic or satin white acrylic snap-in lens with DR or semi-specular cross blade baffle.
Lamping: 1 lamp cross-section T5, T5HO or T8. Luminaire can be ordered with lamps, consult factory.
Mounting: Grid ceiling types. Non-IC rated. Individual mount or continuous runs.
Labels: UL / cUL listed, Non-IC rated for Damp location.
The Nulite Regolo RG2 series is a narrow recessed, nominal 2” wide profile, slot unit designed for grid ceilings. The slender design is ideal for corridors, open and private offices, class-rooms, lobbies and general purpose rooms.
Notes:1. Consult factory.2. Not available in all options, consult factory.3. Specific voltage must be ordered for this option.4. Not available with luminous end drop lens.
2017 Rev. D1Specifications and dimensions are subject to change without notification. Specification sheets on our website supersede all other versions. Nulite reserves the right to bulk package any order.
Continuous RunsXX’ Specify run length in 1’ increment for non-staggered
Staggered
N (Non-staggered)
Shielding / PositionCircuit
1C Single Circuit
1E Single Circuit w/ EM Circuit
1B3 Single Circuit w/ Battery Pack
FR(Frosted)
ST(Satin white)
SB(Semi-spec Blade)
IS (Standard)
PS
HEIS
HEPS
N Normal (Standard)
L Low
H High
DIM1 DimmingSD1 Step Dimming
T8 Options
PS (Standard)
HEPS1
T5 / T5HO
All Lamp Dimming Options
Ballast Factor
IS=Instant StartPS=Program StartHEIS=High Efficiency Instant StartHEPS=High Efficiency Program Start
Ballast FactorN Normal
Options
GLR Fusing
FLEX 6’ of Flex
OS Occupancy Sensor at end of run / unit
DS4 Daylight Sensor at end of run / unit
RG2
B(Baffle Flush)
F(Flush Lens)
R(Regressed Lens)
D(Opaque Ends Drop Lens)
L(Luminous Ends Drop Lens)
Available in
edTechnology
2” [51mm]
2-1/2” [64mm]
5-1/
2” [1
40m
m]
3” [76mm]Grid on-center
Screw Slot
1” Tee
Flush Lens Cross Blade Baffle
1/2” Regressed Lens 1/2” Drop Lens
Project: Qty:
Catalog #:Date:
Type:
RG2 Series
Nulite Lighting 10770 East 51st Avenue, Denver, CO 80239 Phone 303-287-9646 Fax 303-287-0316 www.nulite-lighting.com
TM
Specifications and dimensions are subject to change without notification.
Satin White LensThis diffuser is designed for visible lens uniformity. It’s recommended for regressed lens configuration in our shallow housing.(Transmission ~ 69%)
Frosted LensThis diffuser is designed for a balance between efficiency and lens uniformity.(Transmission ~ 89%)
Frosted
SatinWhite
Shielding Options
Sensor Options
Occupancy or Daylight Sensor in a nominal 3” long insert plate. Lamps extend under the sensor plate and are removable without removing the sensor.
RG4 shown
23-3/8”24”
35-3/8”36”
47-3/8”48”
71-3/8”72”
83-3/8”84”
RG2
RG4
RG6
59-3/8”60”
95-3/8”96”
23-3/8”24”
35-3/8”36”
47-3/8”48”
71-3/8”72”
83-3/8”84”
59-3/8”60”
95-3/8”96”
23-3/8”24”
35-3/8”36”
47-3/8”48”
71-3/8”72”
83-3/8”84”
59-3/8”60”
95-3/8”96”
Individual Lengths
Continuous Run Lengths
RG2 Series
Nulite Lighting 10770 East 51st Avenue, Denver, CO 80239 Phone 303-287-9646 Fax 303-287-0316 www.nulite-lighting.com
TM
Specifications and dimensions are subject to change without notification.
Page 3
2017 Rev. D1
Shown with flush lens option.
Non-Staggered Run Length (A = Stand Alone Housing, S = Starter Housing, M = Mid Housing, E = End Housing)
