CHG. A DIM./ADD 5, 10 & 12" LINES/COMBINE WITH 00405-1011,21 & 40-990000
DESCRIPTION CHG.NO.
DSI1000958 CTO
APP'D
8/16/07
DATE
APPROVAL
SPECIALS
TAGGING
DRAWING
*ALL DIMENSIONS ARE NOMINALAND ARE FOR REFERENCE ONLY
*UNLESS OTHERWISE SPECIFIEDDIMENSIONS IN INCHES (MM)
TYPE I
SHEET 1 OF 6
DIMENSIONAL DRAWING MODEL 405 COMPACT ORIFICE PLATE/FLOWMETER
(3051SFC & 3095MFC)
®
DIRECT MOUNT
DIRECT MOUNTCOPLANAR OR TRADITIONAL
MOUNT ADAPTER
7.70 (196) FOR 30516.27 (159) FOR 3095
DIRECT MOUNT
.70 (18)
8.54 (216) FOR 30517.10 (180) FOR 3095
DIRECT MOUNTCOPLANAR OR TRADITIONAL
MOUNT ADAPTER
NOTES:
1. ROSEMOUNT INC. CERTIFIES THIS DRAWING IS IN ACCORDANCE WITH ROSEMOUNT ENGINEERING SPECIFICATIONS AND ACCURATELY REPRESENTS THE EQUIPMENT FURNISHED.
2. SENSOR ORIENTATION SHOWN FOR DETAIL ONLY. FOR ACTUAL RECOMMENDED LOCATION AND ORIENTATION REFER TO INSTALLATION INSTRUCTION MANUAL 00809-0100-4810 AND PAGES 9 AND 10 OF THIS DOCUMENT.
3. FOR MODEL SELECTIONS, REFER TO ROSEMOUNT PRODUCT DATA SHEET 00813-0100-4810.
4. 405 MAX. TEMP. 450° F DIRECT MOUNT 3-VALVE MANIFOLD, 850°F REMOTE MOUNT WITH GRAPHITE VALVE PACKING.
5. MATERIALS AVAILABLE FOR 405's ARE 316/316L STAINLESS STEEL OR HASTELLOY C-276.
6. ORIFICE IS SQUARE EDGE CONCENTRIC WITH .40 OR .65 BETA.
7. 405 RATED TO 600 ANSI/PN100 316SS.
8 REMOTE MOUNT 3-VALVE MANIFOLD WITH ADAPTER PLATE AND ½” NPT FLANGE ADAPTERS: ADAPTERS CAN BE ROTATED TO GIVE CONNECTIONS CENTERS OF 2.00 (51), 2.13 (54), OR 2.25 (57).
9 ASSEMBLY OF 405 TO FLANGE PIPE SECTION: ALIGNMENT RING WILL HAVE ETCHED FLANGE SIZE TO BE INDEXED WITH STUDS TO INSURE PROPER ALIGNMENT OF 405 TO PIPE ID.
10 STUDS, NUTS AND GASKETS NOT INCLUDED WITH 405. CORRECT STUD SIZE PER TABLE 2 IS CRITICAL FOR PROPER ALIGNMENT. RECOMMENDED GASKET: 1/16” THICK DURLON 8500 OR EQUIVALENT FOR MAX CONTINUOUS TEMPERATURE UP TO 548° F (287° C). FOR HIGHER TEMPERATURES, CONSULT FACTORY.
11. FOR OPTIMUM PERFORMANCE, ORIENTATION AND FLOW DIRECTION IS AS FOLLOWS: GAS: DIRECT MOUNT OR REMOTE MOUNT OPTIONS ARE ACCEPTABLE WITH A HORIZONTAL LINE OR DOWNWARD FLOW IN A VERTICAL LINE. REMOTE MOUNTING IS RECOMMENDED WITH UPWARD FLOW IN A VERTICAL LINE. LIQUID: DIRECT MOUNT OR REMOTE MOUNT OPTIONS ARE ACCEPTABLE WITH A HORIZONTAL LINE OR UPWARD FLOW IN A VERTICAL LINE. IT IS NOT RECOMMENDED TO USE WITH DOWNWARD FLOW IN A VERTICAL LINE. STEAM: REMOTE MOUNTING IS ACCEPTABLE WITH HORIZONTAL OR UPWARD FLOW IN A VERTICAL LINE. DIRECT MOUNTING IS RECOMMENDED ONLY IN A HORIZONTAL LINE. IT IS NOT RECOMMENDED TO USE WITH DOWNWARD FLOW IN A VERTICAL LINE.
12. SPECIAL CLEANING NOT AVAILABLE FOR HIGH TEMP. OPTION.
DIRECT MOUNT CONNECTION TYPESNOTE: 3095 TRANSMITTER SHOWN
FOR REFERENCE3051 AVAILABLE W/IDENTICAL OPTIONS
(405P SHOWN/405C AVAILABLE)
TABLE 2 (SEE NOTES 9 & 10)
FLANGE SIZE
ANSI / DN
FLANGE RATING
150# ANSI 300# ANSI 600# ANSI DIN PN16 DIN PN40 DIN PN100 JIS 10K JIS 20K JIS 40KTHREAD SIZE / (QTY.) / STUD LENGTH (NOTE:DIN & JIS ARE IN mm)
