2
Have you considered automatic roll changing at your unwind and rewind? If not, you may have overlooked the most important productivity contribution to your bottom line. • Stopping and starting for manual roll changes causes wasted material and lost productivity. • Core waste represents real dollars lost to the landfill that could have been profitable product. • Poor web tension control leads to wasted production and expensive rework. The benefits of non-stop productivity can be applied to any job requiring one or more roll changes. These benefits add up to significantly increased productivity and greater quality control. Simplicity and versatility are hallmarks of Martin engineering. • Simplified designs deliver greater reliability with lower maintenance costs. • Unprecedented flexibility significantly extends your equipment’s effective service life to provide a much greater return on your initial investment. Only Martin Automatic combines superior automatic roll changing, tension control and web handling systems with this versatile approach to configuration flexibility. TYPICAL SPECIFICATIONS* Maximum Splicing Speed to 500 fpm 150 m/min Maximum Web Width to 13 in 330 mm Maximum Roll Diameter to 31.5 in 800 mm Non-Stop Roll Changing Solutions for Label and Narrow Web Martin Engineers Solutions The benefits of automatic splicing add up to significantly increased productivity, greater quality control and reduced waste. Martin Automatic applies these benefits to label converting and narrow web applications. • Compact design, ideal for mounting above press or process • Pull-out spindles and splice unit for ergonomic roll loading and splice preparation • Pneumatic spindle chucking • Ability to load two full-diameter rolls • Taped overlap splice with no leading or trailing edge when 2 in (50 mm) tape is used. • Martin inertia-compensated tension control system • Manually operated running roll sidelay • Martin standard PLC control system • Integrated web guide (optional) TYPICAL SPECIFICATIONS* Maximum Splicing Speed to 500 fpm 150 m/min Maximum Web Width to 20 in 508 mm Maximum Roll Diameter to 24 in 610 mm * As with all Martin products, this model is application-engineered to the process. Consult Martin Automatic Inc for more information. MLS Automatic Splicer STS Automatic Splicer MBNT Automatic Butt Splicer • Compact non-stop unwind for narrow web applications • Splice unit for taped butt and taped overlap splices • Available in-register splicing for pre-printed webs • Non-stop unwinding for label converting, flexible packaging and narrow web applications • Capacity for two full- diameter rolls at any time • Precision rolling shear splice unit for clean cut-off and tight splices • Martin inertia-compensated tension control system TYPICAL SPECIFICATIONS* Maximum Splicing Speed to 800 fpm 240 m/min Maximum Web Width to 26 in 660 mm Maximum Roll Diameter to 50 in 1270 mm * As with all Martin products, this model is application-engineered to the process. Consult Martin Automatic Inc for more information. High Performance Splicing, Rewinding and Tension Control Systems www.martinautomatic.com
