Date post: | 29-Oct-2014 |
Category: |
Documents |
Upload: | cristhian-ona-p |
View: | 150 times |
Download: | 27 times |
ISSUEISSUE
Fixed Network Curriculum
Development Section
Fixed Network Curriculum
Development Section
UA 011103 SG7000 data Configuration
UA 011103 SG7000 data Configuration
1.01.0
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
ObjectivesObjectives
Master the basic GUI operation in the
SG7000 Product
Comprehend the Data analysis sequence of
SG7000
Perform SG7000 data setting correctly
Upon completion of this course,you will be able to:
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Referrence materialReferrence material
31130979-Package of Documents-U-SYS SG7000
V100R001(V1.10)
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Chapter 1 SG7000 Data Setting Basis
Chapter 2 SG M3UA and MTP Data Setting
Chapter 3 SG7000 Maintenance Command
Chapter 3 SoftX3000 Data Setting
Course ContentsCourse Contents
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Basic information Basic information
SG7000 Client Software installation
Firstly we need install DAO program.
Serial number of SG7000 software is “sg7000”
BAM IP address
IP address of BAM should be 172.6.0.6 and 172.8.0.8
HSYS default IP address is :172.6.1.6 and 172.8.1.8
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
SG7000 BAM ProcessesSG7000 BAM Processes
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Add workstation and right for yourself
G_SYS have all rights. G_GUEST have lowest right.
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Interface of SG7000 MML terminalInterface of SG7000 MML terminal
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Navigation tree of the maintenance system Navigation tree of the maintenance system
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Procedures of data configuration
MTP3 management
SCCP management
SCTP parameter setting
M3UA and M2PA management
Setting the local office information
Configuringhardware data
Sig
na
ling m
ana
ge
me
nt
Se
tting so
ftwa
re p
ara
me
ters
Se
tting tim
er ta
ble
CKII work status
Local IP address
EPII work status
Board configuration
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Fast Data configuration process
BKP DB (Backup BAM’s Database in E:\MSSQL\DATA\)
SET OPMODE (OFFLINE)
Input Command Step by Step& Execute in your client SET OPMODE (ONLINE)
SET SFTSWT (ALL,224)LOAD&SAVE BOTH
PROGRAM AND DATA
POWER OFF AND POWER ON
After Loading FinishedQuery The Hardware/MTP-Links/M3UA-Link StatusTracing The Message in MTP-Links and M3UA-Link
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Set the online mode
You can set offline mode firstly ,add frame/board… in BAM, then FMT data, then Download all hardware data to Host.
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Alarm output switch of current workstation
Sometimes if there are too much alarm message,You don’t want be disturbed, you can close alarm Output temporarily.
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Negotiatory Parameters Between SG And Softx3000
Parameter SG7000 SoftX3000
Destination Signaling Point Code (DPC) ADD N7DSP SET OFI
Routing Context ADD M3AS ADD M3LE
“Work Mode” in SG7000“Local Entity Type” in SX3000
ADD M3ASSOS(SGP)
ADD M3LE(AS)
Remote IP address ADD RIP ADD FECFG
Local port number ADD M3ASSO ADD M3LNK
Remote port number ADD M3ASSO ADD M3LNK
C/S model ADD M3ASSO(Server)
ADD M3LNK(Client)
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Negotiatory Parameters Between SG7000 And PSTN
Parameter SG7000 PSTN Switch
Destination Signaling Point Code (DPC) ADD N7DSP --
Signaling Link Code (SLC) ADD N7LNK --
Start Time Slot (Ts) ADD N7LNK --
Number of Combination Ts (Specially for 2M Link) ADD N7LNK --
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Chapter 1 SG7000 Data Setting Basis
Chapter 2 SG M3UA and MTP Data Setting
Chapter 3 SG7000 Maintenance Command
Chapter 3 SoftX3000 Data Setting
Course ContentsCourse Contents
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Configuration of the SG7000 service frameConfiguration of the SG7000 service frame
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Example: Data PlanningExample: Data Planning
SoftX3000 SG7000 PSTN Swith
IP address 10.14.10.1 (IFMI ) 10.14.10.20 (SBPI ) ---
Mask 255.255.255.0 ---
Gateway 10.14.10.62 (for SG7000) ---
SP code(14 bits)0x973 --hexadecimal( We user it in comman
d) (2419) -- decimal
0x972 (2418)
0x97B (2427)
Signaling mode SIGTRAN SIGTRAN ,SS7 SS7
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Basic Configuration
Step Command
Step 1: Add Board ADD BRD
Step 2: Add the local IP address (SBPI) ADD LIP
Step 3: Add EPII/ SEPU work status ADD TRUNKSTAT
Step 4: Add CKII work status ADD CKISTAT
Step 5: Set the local office information SET OFI
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Configuration steps of M3UA Data (1)
Step Command
Step 1: Add the Destination Signaling Point ADD N7DSP
Step 2: Add the M3UA Application Server ADD M3AS
Step 3: Add the M3UA association set ADD M3ASSOS
Step 4: Add the M3UA route ADD M3RT
Step 5: Add the local IP address combination ADD LIPC
Step 6: Add the remote IP address ADD RIP
Step 7: Add the remote IP address combination ADD RIPC
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Step Command
Step 8: Add the access control information ADD IPDACL
Step 9: Add the M3UA association ADD M3ASSO
Configuration steps of M3UA Data (2)
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
relationship between the M3UA parameters
relationship between the M3UA parameters
index number[national network code][STP][adjacent flag][route selection field][SCCP function][timer index]
ADD M3ASindex number[SG work mode][destination point code index][routing context]
ADD N7DSP
ADD M3ASSOSindex number[adjacent application server index][work mode]
ADD M3RTindex number[application server index][association set index]
ADD LIPCindex number[FE index 1][FE index 2]
ADD RIPindex number[remote IP address]
ADD LIPindex number[local IP address of FE interface][IP mask of FE interface][default gateway of FE interface]
ADD RIPCindex number[remote IP address index 1][remote IP address index 2]
ADD M3ASSOindex number[shelf number][frame number][board number][board association number][local IP combination index][remote IP combination index][C/S mode][association set index][active_standby flag]
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Configuration steps of MTP Data
Step Command
Step 1: Add the Destination Signaling Point ADD N7DSP
Step 2: Add the MTP link set ADD N7LKS
Step 3: Add the MTP route ADD N7RT
Step 4: Add two MTP link ADD N7LNK
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Check the Office data
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Check the signalling data
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Chapter 1 SG7000 Data Setting Basis
Chapter 2 SG M3UA and MTP Data Setting
Chapter 3 SG7000 Maintenance Command
Chapter 3 SoftX3000 Data Setting
Course ContentsCourse Contents
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Maintenance system
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
MTP message trace
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
The trace of SS7 link message
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Results of MTP single object query
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Results of MTP link set multi object query
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
M3UA Link Trace
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Results of M3UA association multi object query
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
M3UA association set multi board query
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
M3UA application server multi board query
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Query results of the EPII E1 port status
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
SG7000 Alarm console
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Maintenance Command(1)
Operation Command
Activate the MTP Link Set ACT N7LKS
Deactivate the MTP Link Set DEA N7LKS
Activate the MTP Link ACT N7LNK
Deactivate the MTP Link DEA N7LNK
Active M3UA Association ACT M3ASSO
Deactivate M3UA Association DEA M3ASSO
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Maintenance Command (2)
Operation Command
Tracing M3UA Signaling Message ACT MTPTRAC
Stop Tracing M3UA Signaling Message STP M3TRAC
Tracing MTP Signaling Message ACT MTPTRAC
check the consistency between foreground and background
ACT CNSCHK
Backup of BAM Database BKP DB
Set softswitch when you want to load system or reset any boards
SET SFTSWT: MODE=ALL, VAL=224;
Execute other operations in Maintenance Tool Navigator of Maintain System
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Chapter 1 SG7000 Data Setting Basis
Chapter 2 SG M3UA and MTP Data Setting
Chapter 3 SG7000 Maintenance Command
Chapter 3 SoftX3000 Data Setting
Course ContentsCourse Contents
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
Configuration steps in SoftX3000
Step Command
Add M3UA Local Entity ADD M3LE
Add M3UA Destination Entity ADD M3DE
Add M3UA Linkset ADD M3LKS
Add M3UA Link ADD M3LNK
Add M3UA Route ADD M3RT
Add Route Analysis ADD RTANA
Add Called Number Analysis ADD CNACLD
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal
SummarySummary
In this course, we mainly discuss about how to
setup SG7000 data correctly.
You must set data in regular sequence.
Use trace functionality to verify the SG7000 data.
Confidential Information of Huawei. No Spreading without Permission.
Security Level: Internal