w w w . i n a t e c k . com

UA2001USB3.0 to IDE + SATA Adapter

Supports One Touch Backup Function (For Windows)

- 2 -

UA2001 USB3.0 to IDE + SATA AdapterInstruction Manual

Super Speed (5Gbps) / high-speed (480 Mbps) / full-speed (12 Mbps) Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector Support SATA 2.5" / 3.5" HDD, IDE 2.5" / 3.5" HDD Operate with one IDE and one SATA HDD Simultaneously

Plug and play, hot swappable

Packing list:

USB3.0 to IDE + SATA Converter x1 USB3.0 Data Cable x1 Instruction manual x1

I. UA2001 Introduction Inateck UA2001 is a portable IDE/SATA to USB 3.0 SDD/HDD convertor, featuring very conveniently connecting to 3 2.5/3.5 inch hard drivers with SATA or IDE interfaces; Delicate, unique and space saving appearance design with one touch backup function; It secures and synchronizes data more easily;It offers an ideal connecting way between external storage devices and PCs.

4PIN Power Cable x1

Product schematic

① One Touch Backup② Power LED③ Power Switch

④ DC IN⑤ Micro B⑥ IDE HDD Power out

SATA III (6Gbps) & SATA II (3Gbps) & SATA I (1.5Gbps) Compliant

Driver CD x1

Power Supply x1

3.5”SATAHDD

3.5”IDEHDD DVD-ROM,

CD-ROM, CD-RW, DVD+RW DVD-RAM

2.5”IDEHDD

2.5”SATAHDD

Connection

- 3 -

II. Technical data Product name USB3.0 to IDE + SATA Adapter with ON/OFF Switch

Product type Inateck UA2001

Weight 50g

Colour Black

Supported drives 2.5”/3.5” IDE/SATA I/II/III HDD/SSD

Interface USB3.0, SATA, IDE x 2

Material Plastic

Hot Plug, Plug & Play Supported

Function One Touch Backup (For Windows)

Measurements 89mm x 78mm x 13mm

Operation environment Storage: -40 to 70 °C; Operation: 5 to 55 °C

Supported operating systems Windows XP, Vista, 7, 8/8.1(32/64-bit), Mac

III. Introduction of Backup Functiona. Select the drive of the target device.

b. After selecting the drive, the Config, OTB Path and Restore will enabled.

c. In Config page, set the PC as Original PC, then we can use the backup function.

- 4 -

d. Select the folder for backup. Then, click Save.

e. (3) Backup Set: Blue Light means the user has already chosen the folder forbackup. (4) Mode: Original PC. Then, click (5) to start the backup. If you needto stop the backup process, click (5) again. Then, the backup process will bestopped.

- 5 -

f . The backup processing window can be minimized. After finished, the message box will be pop-up to notice the user.

- 6 -

OK

a. Source Path: Restore data to their orginal folders, only usable in original PC.

IV. Introduction of Restore Function

b. Custom Path: Resrore the data in external HDD to specified folder.c. Click Restore to start, click it again will stop the operation.

- 7 -

a. Support the OTB button or not. Default checked.

V. Option Page

b. Pop up a message box before starting backup, to prevent user misclick. Defaultchecked.

c. Pop up countdown window after completing backup. The computer shuts downwhen countdown finishs.

d. Click Save to save the changes.

- 8 -