21
UBIQUITY ROUTER RK2x Remote assistance devices based on Cortex multicore processor
UBIQUITY ROUTER RK2xRemote assistance devices based on Cortex multicore processor
UBIQUITY Router - Overview
• «Hardware & Software» remote assistancesolution for every kind of application, featuring remote access up to the serial or Ethernet automation subnetworks for installation, debug or maintenance of machines or plants.
• With Ubiquity Router devices it is possible to reach also plants and automation networks where the UBIQUITY runtime software installation is not possible:• Energy plants• Unattended sites• ‘Unconnected’ facilities
2
UBIQUITY Router RK2x - Highlights
* MPI not supported (No real time O.S.)
• ARM i.MX 7Dual Cortex A7 1GHz dual core processor• UBIQUITY Router runtime• 1 x USB 2.0 for configuration and updates• 2 x Gigabit Ethernet
– Internet ( WAN )– Automation network ( LAN or 4 ports switch)
• 1 x RS232/422/485 isolated ( DB9 ) *• 1 x WiFi IEEE 802.11 a/b/g/n• 1 x modem 2G/3G/4G (LTE)• 12/24VDC isolated power supply• Aluminium chassis for wall and book mounting even with
DIN rail hook.
3
RK20REMOTE ASSISTANCE ASEM UBIQUITY Router runtime
CASE DIN rail book mounting holders, Wall book mounting kit includedAluminum frame, shell and hook
PROTECTION GRADE IP20
PROCESSOR ARM i.MX 7Dual, Cortex A7 1 GHz dual core, 533 MHz system memory bus
SYSTEM MEMORY - RAM 1 GB DDR3L soldered on board
MASS STORAGE 8 GB eMMC MLC (Solid State Disk)
LAN LAN - 1 x Ethernet 10/100/1000 Mbps (RJ45)WAN - 1 x Ethernet 10/100/1000 Mbps (RJ45)
USB 1 x USB 2.0 (Type-A)
SERIAL 1 x RS 232/422/485 isolated (DB9M)
DIGITAL I/O 2 x DIN + 2 x DOUT for enabling services and signalling
BATTERY 1 x CR1220 Removable (internal)
POWER SUPPLY INPUT 12/24VDC isolated, input range 9÷34VDC
OPERATING TEMPERATURE -20°÷+70°C
APPROVALS CE, cULus LISTED (61010) pending
UBIQUITY Router RK20 – Technical features
4
UBIQUITY Router RK21 – Technical features
5
RK21 WiFi RK21 3G RK21 4G/LTE RK21 4G/LTE-AMCELLULAR NETWORK
Standard
-
2G/3G/3G + EDGE/HSPA up to 5,76Mbps upload /
21,6Mbps download
2G/3G/4G LTEup to 50Mbps upload / 100Mbps download
Regions All Continents Europe, Latin America, Asia, Africa, Oceania
North America, Latin America
Antenna 1 x SMA-F connector
SIM 1x SIM card socket push-push type
WiFi Standard IEEE 802.11 a/b/g/n (For RK22, on “WiFi” models only)
Features Client / Access point (For RK22, on “WiFi” models only)
Security WPA2 (For RK22, on “WiFi” models only)
Rx Sensitivity 802.11a: -73dBm / 802.11g: -74dBm / 802.11n(2,4GHz): -72dBm@HT20, -69dBm@HT40 / 802.11n(5GHz): -69dBm@HT20, -68dBm@HT40 (For RK22, on “WiFi” models only)
Antenna 2 x RP-SMA-F (For RK22, on “WiFi” models only)
REMOTE ASSISTANCE ASEM UBIQUITY Router runtime
CASE DIN rail book mounting holders, Wall book mounting kit includedAluminum frame, shell and hook
PROTECTION GRADE IP20
PROCESSOR ARM i.MX 7Dual, Cortex A7 1 GHz dual core, 533 MHz system memory bus
SYSTEM MEMORY - RAM 1 GB DDR3L soldered on board
MASS STORAGE 8 GB eMMC MLC (Solid State Disk)
LAN LAN - 1 x Ethernet 10/100/1000 Mbps (RJ45)WAN - 1 x Ethernet 10/100/1000 Mbps (RJ45)
USB 1 x USB 2.0 (Type-A)
SERIAL 1 x RS 232/422/485 isolated (DB9M)
DIGITAL I/O 2 x DIN + 2 x DOUT for enabling services and signalling
BATTERY 1 x CR1220 Removable (internal)
POWER SUPPLY INPUT 12/24VDC isolated, input range 9÷34VDC
OPERATING TEMPERATURE -20°÷+60°C -20°÷+60°C -20°÷+70°C / -20°C÷ +60°C with WiFi
APPROVALS CE, RED pending, cULus LISTED (61010) pending
UBIQUITY Router RK22 – Technical features
6
RK22 RK22 3G RK22 4G/LTE RK22 4G/LTE-AMCELLULAR NETWORK
Standard
-
2G/3G/3G + EDGE/HSPA up to 5,76Mbps upload /
21,6Mbps download
2G/3G/4G LTEup to 50Mbps upload / 100Mbps download
Regions All Continents Europe, Latin America, Asia, Africa, Oceania
North America, Latin America
Antenna 1 x SMA-F connector
SIM 1x SIM card socket push-push type
WiFi Standard IEEE 802.11 a/b/g/n (on “WiFi” models only)
Features Client / Access point (on “WiFi” models only)
Security WPA2 (on “WiFi” models only)
Rx Sensitivity 802.11a: -73dBm / 802.11g: -74dBm / 802.11n(2,4GHz): -72dBm@HT20, -69dBm@HT40 / 802.11n(5GHz): -69dBm@HT20, -68dBm@HT40 (on “WiFi” models only)
Antenna 2 x RP-SMA-F (on “WiFi” models only)
REMOTE ASSISTANCE ASEM UBIQUITY Router runtime
CASE DIN rail book mounting holders, Wall book mounting kit includedAluminum frame, shell and hook
PROTECTION GRADE IP20
PROCESSOR ARM i.MX 7Dual, Cortex A7 1 GHz dual core, 533 MHz system memory bus
SYSTEM MEMORY - RAM 1 GB DDR3L soldered on board
MASS STORAGE 8 GB eMMC MLC (Solid State Disk)
LAN LAN - 1 x 4 ports unmanaged Ethernet switch 10/100/1000 Mbps (RJ45)WAN - 1 x Ethernet 10/100/1000 Mbps (RJ45)
USB 1 x USB 2.0 (Type-A)
SERIAL 1 x RS 232/422/485 isolated (DB9M)
DIGITAL I/O 2 x DIN + 2 x DOUT for enabling services and signalling
BATTERY 1 x CR1220 Removable (internal)
POWER SUPPLY INPUT 12/24VDC isolated, input range 9÷34VDC
OPERATING TEMPERATURE -20°÷+70°C / -20°C÷ +60°C with WiFi
APPROVALS CE, RED pending, cULus LISTED (61010) pending
UBIQUITY Router RK20, RK21 – MB 371
77
• Motherboard R371– CPU– Memories– Interfaces connectors– Isolated power supply– Digital I/Os
UBIQUITY Router RK22 – MB 372
• Motherboard R372– CPU– Memories– Interfaces connectors– Isolated power supply– Digital I/Os
88
UBIQUITY Router RK21, RK22 – Communication modules
99
Wireless extension board with SIM card slot
Mobile network 2G/3G/4G modem MiniPCIe modules
WiFi half MiniPCIemodule
RK21MB371 + Wireless Ext. board
RK22MB372 + Wireless Ext. board
UBIQUITY Router RK2x – Mechanical details
Deep-drawn front plate for sticker
CoverChassis
Motherboard R371/R372
Wireless extension board
10
Antenna Description 3G 4G/LTE WiFiSteerable stilo antenna 72mm, 10W, 1dBi
Magnetic antenna 116mm, Ø29.5mm, 50W, 0dBi
Wall-mount antenna 250mm, 2W, 2dBi, IP67
Outdoor antenna 48mm, Ø50mm, 5W, 3dBi, IP67
2 x stilo antennas 194mm, 2W, 3/5dBi
2 x blade antennas 157mm, 3W, 2/4dBi
UBIQUITY Router – RK21/RK22 antennas
11
* it is possible to add 3, 5 or 10mt extension cables
UBIQUITY Router – Digital Inputs
12
DIGITAL IN / OUT
12
UBIQUITY ROUTERCONFIGURATION
IN0SENSE?
WAN CONNECTION
ENABLED
NO(DEFAULT)
IN0+
IN0-
24V DC
YES
DIGITAL IN / OUT
34
RESETBUTTON
Processor «POR» input
IN1+
IN1-
24V DC
WD reset
REBOOT COMMAND FROM
CONTROL CENTER
WD reset
HW RESET PROCEDURE
IN0 IN1
Description
IN0 Security key input for WAN connection activation. Function managed by Control Center. Disabled by default.
IN1 UBIQUITY Router software reset input
TYPE 0÷24V DC, 500V isolation
UBIQUITY Router – Digital Outputs
13
DOUT0 DOUT1
DIGITAL IN / OUT
56
OUT0A
OUT0B
24V DCmax
200mA
DIGITAL IN / OUT
56
OUT0A
OUT0B
24V DC
max 200mA
230V AC
DIGITAL IN / OUT
78
OUT1A
OUT1B
24V DCmax
200mA
DIGITAL IN / OUT
78
OUT1A
OUT1B
24V DC
max 200mA
230V AC
Description
OUT0 UBIQUITY Router authenticated on Domain and WAN remote connection enabled signalling
OUT1 Remote assistance service running
TYPE Output with relay 200mA@24V DC max for contact (N.O. - normally open)
UBIQUITY Router RK2x – Multistandard serial port pin-out
14
Pin RS232 RS422 RS4851 +5VDC +5VDC +5VDC2 RX (←) RX+ (←)3 TX (→) TX- (→) RTX- (↔)45 GND GND GND67 RTS (→) TX+ (→) RTX+ (↔)8 CTS (←) RX- (←)9
UBIQUITY Router RK20 - Connectors
15
UBIQUITY Router RK20 - Dimensions
16
UBIQUITY Router RK21 - Connectors
17
UBIQUITY Router RK21 - Dimensions
18
UBIQUITY Router RK22 - Connectors
19
UBIQUITY Router RK22 - Dimensions
20
