+ All Categories
Home > Documents > UBolt-Cote Atlas Pipe Support Pads · lined pipe and will help to reduce vibration and noise...

UBolt-Cote Atlas Pipe Support Pads · lined pipe and will help to reduce vibration and noise...

Date post: 21-Mar-2020
Category:
Upload: others
View: 6 times
Download: 0 times
Share this document with a friend
6
ISO-9001:2015 Certified Company - FM537405 UBolt-Cote ® & Atlas Pipe Support ® Pads
Transcript
Page 1: UBolt-Cote Atlas Pipe Support Pads · lined pipe and will help to reduce vibration and noise levels. Atlas Pipe Support® Pads UBolt-Cote ® & AtlA s PiPe sUPPort® PAds UBolt-Cote

Other PrOducts AvAilAble• Kleerband® Flange Band Protectors• Radolid® Bolt & Nut Protection Caps• Casing Spacers and End Seals• Innerlynx® - Modular Mechanical Seals• IsoJoint® - Monolithic Isolators• Foreman Nite Caps - Temporary Pipe Plugs• Standard Isolating Gasket Kits• Integra SSA® - Cathodic Isolating Gasket Kits

tO Order PleAse sPecify the fOllOwing1. Pipe Size2. Material: Carbon steel or stainless steel3. Coating: Galvanized or Xylan (PTFE)4. Pad: Buna-N, viton or thermoplastic

Advance Products & Systems, LLC is not responsible for errors printed in this brochure.

I S O - 9 0 0 1 : 2 0 1 5 Ce r t i f i e d Co m p a n y - F M 5 3 7 4 0 5

Advance Products & Systems, LLC shall repair or replace (within the limitations of such applicable express written warranty as may be issued by it) any product or portions thereof, which prove to be defective in workmanship or material for a period of 12 months from shipment date. The foregoing in lieu of all warranties, express or implied, and all other obligations or liabilities on the part of APS, on account of the product which it may sell. In no event shall APS be liable for consequential or special damages: nor except as it may otherwise specifically agree in writing, installation, or other work which may be done upon or in connection with the product by APS/ the distribution / dealer or others. THE LIMITED WARRANTIES PROVIDED IN THIS AGREEMENT AND THE OBLIGATIONS AND LIABILITIES OF APS ARE THE ONLY WARRANTIES MADE BY APS AS TO THE PRODUCT. APS MAKES NO EXPRESS OR OTHER IMPLIED WARRANTIES, BY COURSE OF DEALING, USAGE OF TRADE, MERCHANTABILITY, FITNESS FOR A PARTICULAR USE (WHETHER GENERAL OR SPECIFIC), OR OTHERWISE.

REV 122018

P. O. Box 60399 • Lafayette, Louisiana 70596-0399800-315-6009 • 337-233-6116 • FAX: 337-232-3860Email: [email protected] • Website: www.apsonline.com

UBolt-Cote®

&

Atlas Pipe Support® Pads

Distributed by:Properties Atlas Pipe support® ht results (Amber)

Atlas Pipe support® Xt* results (beige)

testing Method

Density 0.0462 lb/in³ 0.047 lb/in³ D792Water Absorption, 24 hours 0.25% 0.10 D570Tensile Srength 16,500 psi 16,000 psi D638Tensile Modulus 500 ,000 psi 500,000 psi D638Tensile Elongation at Break 80% 20% D638Flexural Strength 20,000 psi 25,000 psi D790Flexural Modulus 500,000 psi 600,000 psi D790Compressive Strength 22,000 psi 20,000 psi D695Compressive Modulus 480,000 psi 500,000 psi D695Coefficient of Friction 0.42 0.40 N/A QTM 55007Hardness, Rockwell, M/R 112/125 100/126 D785IZOD Notched Impact 0.5 ft-lb/in 1.0 ft-lb/in D256

Coefficient of Linear Thermal Expansion 3.1 2.6 E831Maximum Operating Temperature 340° F (171° C) 480° F (249° C)Melting Point 410° F (210 °C) 644° F (340° C) D3418Heat Deflection Temperature at 264 psi 400° F (204°C) 320° F (160° C) D648Flammability Rating V-0 V-0 UL94Dielectric Strength, short-term 830 V/mil 480 V/mil D149

Extreme Temperature UBolt-Cote® & Atlas Pipe Support® Pads

Properties ht ubolt -cote® results

Xt ubolt-cote® results

Continuous Operating Temperature Max 302° F(150° C or 175° C)

-454° F to 500° F(-270° C to 260° C)

UBolt-Cote®Extreme temperature UBolt-Cote are available in HT and XT materials. Both materials offer excellent chemical resistance, low coefficient of friction, and excellent UV resistance.

Atlas Pipe Support® PadsExtreme temperature pads are available in Atlas Pipe Support® HT and Atlas Pipe Support® XT* materials. Both materials offer excellent chemical resistance, low moisture absorption, and are not affected by continuous exposure to hot water and steam environments. Atlas Pipe Support® HT pads offer excellent chemical resistance.

Atlas Pipe Support®HT Pad

Atlas Pipe Support® XT* Pad

UBolt-Cote® HTUBolt-Cote® XT

UBolt-Cote® HT withAtlas Pipe Support®

HT PadMax Operating Temp:

302° F

UBolt-Cote® XT withAtlas Pipe Support®

XT* PadMax Operating Temp:

480° F

4

Page 2: UBolt-Cote Atlas Pipe Support Pads · lined pipe and will help to reduce vibration and noise levels. Atlas Pipe Support® Pads UBolt-Cote ® & AtlA s PiPe sUPPort® PAds UBolt-Cote

Optional Powder Coated UboltGeneral DescriptionThis product has a high flow, functionalized polyethylene copolymer-based thermoplastic powder coating designed for maximum mechanical performance, impact resistance and UV-stability. Application Data • Recommended thickness is a minimum of 50 mils, and a maximum of 70 mils. • Our proprietary material, Gal-vo-plast®, is also used as a powder coat on ubolts. The melting point of Gal-vo-plast® is 221 °F.

Galvanized long tangent ubolts ranging in sizes from 3/4” through 20” are stock items. Larger sizes available upon request. All assemblies include coated ubolts, 4 nuts and pad.

Dimensional Data

Physical Properties

Chemical Properties

B

C

E

D

A

Pipe Support Pad

Performance Properties Testing Method Results

PipeSize A B C D E

Weightper 100

3/41

1-1/41-1/2

22-1/2

33-1/2

4568

10121416182024283036

1/41/43/83/83/81/21/21/21/21/25/85/83/47/87/87/8

111111

1-1/81-3/8

1-11/162

2-7/162-15/163-9/164-1/164-9/165-5/86-3/48-3/4

10-7/812-7/814-1/816-1/818-1/820-1/824-1/828-1/830-1/836-1/8

1-3/81-5/8

2-1/162-3/8

2-13/163-7/164-1/164-9/165-1/166-1/87-3/89-3/8

11-5/813-3/4

1517

19-1/821-1/825-1/829-1/831-1/837-1/8

2-3/42-3/42-7/8

33-1/83-3/4

44-1/44-1/2

55-1/87-1/88-3/89-5/8

10-1/411-1/412-5/813-5/815-5/817-5/818-5/821-5/8

2-3/82-3/82-1/22-1/22-1/2

33333

3-3/43-3/4

44-1/44-1/44-1/44-3/44-3/44-3/44-3/44-3/44-3/4

13143839429099

105115128239283479764820870

135014601710180019102320

Tensile StrengthElongationHeat Aging(168 hrs/121 °C)Tensile ElongationHeat ShockLow Temp. Flexibility (4hrs/-55 °C)Specific Gravity/Temperature Limitation

1500 psi min.300% min

1500 psi min

300% minNo cracks, flow or blisters

No cracking

0.96/200%

ASTM D412ASTM D412

ASTM D2671

ASTM D2671ASTM D2671

ASTM D2671

ASTM D792

Water AbsorptionCorrosive Effect(16hrs/175 °C)Fluid Resistance(24hrs/25 °C)Hydraulic Fluid (MIL-H-5606C)TensileElongationLubricating Oil (MIL-L-7808G)TensileElongationDiesel Fuel (MIL-L-23699)TensileElongation

0.2%

Pass

90% retained min90% retained min

90% retained min90% retained min

90% retained min90% retained min

ASTM D570ASTM D2671/Copper Rod

ASTM D412ASTM D412

ASTM D412ASTM D412

ASTM D412ASTM D412

Adhesion

Hardness (Shore D)

Impact Resistance

Salt Spray Resistance

Humidity Resistance

Taber Abrasion

Mandrel Bend

Melt Index

Gloss

ASTM D 4541, ASTM D 3359

ASTM D 2240

ASTM B 2794

ASTM b-117

ASTM D 2247

ASTM D 4060

ASTM D 522

ASTM D 1238

ASTM D 523

>800 PSI (test conducted on blasted substrate)52

>384 in./lbs.

>2,000 hours

No blistering or loss of gloss after 1,000 hours

100 (mg loss, CS 17 wheel)

1/8 inch, no cracks (>32%)

207

60 - 75

Prevent CorrosionThis is a typical example of accelerated corrosion occurring due to metal contact between the uncoated ubolt and the pipe. The excessive corrosion and pitting can eventually develop into pinhole leaks. This interaction can be completely eliminated by utilizing APS UBolt-Cote® in conjunction with Atlas Pipe Support® Pads.

ApplicationUBolt-Cote® is excellent for eliminating corrosion problems on piping in refineries, chemical plants, paper mills, offshore platforms, rigs and the shipping industry. It is also excellent for shock absorption on plastic, FRP or glass-lined pipe and will help to reduce vibration and noise levels.

Atlas Pipe Support® Pads

UBolt-Cote® & AtlAs PiPe sUPPort® PAds UBolt-Cote® & AtlAs PiPe sUPPort® PAds

®

The Atlas 180 and Atlas 360 pipe support pads are the best pipe support solution due to zero water absorption and with minimal contact between pad and pipe, the possibility of crevice corrosion is eliminated. Also, Atlas pads contain a UV additive to resist the harmful, degrading effects of sunlight.Note: Black pads provide better UV resistance than white pads. Both are made of high-density thermoplastic material.

Atlas 180 Atlas 360

“Strong Enough to Hold the World, Built to Hold Your Pipe”

ADVANTAGES

Versatility - with a wide variety of sizes available, UBolt-Cote® can be applied to all sizes of ubolts.

Protection - A rugged and durable covering, eliminating metal to metal contact.

Reliability - Virtually unaffected by heat, ultraviolet rays, vibration, electrolysis, sandblasting or other rigors conducive to an industrial and marine environment.

Ease of Installation - The ubolt size has been considered to accommodate the coating thickness assuring a good fit over the pipe.

FEATURES

UBolt-Cote® is a seamless, vulcanized, polyolefin material that can be applied to all types of ubolts. It is available on hot-dipped galvanized, Xylan (PTFE),carbon steel, and on stainless steel.

1/2 1/4 15/16 1-3/16 2-3/4 2-3/8 11

1 2 3

Page 3: UBolt-Cote Atlas Pipe Support Pads · lined pipe and will help to reduce vibration and noise levels. Atlas Pipe Support® Pads UBolt-Cote ® & AtlA s PiPe sUPPort® PAds UBolt-Cote

Optional Powder Coated UboltGeneral DescriptionThis product has a high flow, functionalized polyethylene copolymer-based thermoplastic powder coating designed for maximum mechanical performance, impact resistance and UV-stability. Application Data • Recommended thickness is a minimum of 50 mils, and a maximum of 70 mils. • Our proprietary material, Gal-vo-plast®, is also used as a powder coat on ubolts. The melting point of Gal-vo-plast® is 221 °F.

Galvanized long tangent ubolts ranging in sizes from 3/4” through 20” are stock items. Larger sizes available upon request. All assemblies include coated ubolts, 4 nuts and pad.

Dimensional Data

Physical Properties

Chemical Properties

B

C

E

D

A

Pipe Support Pad

Performance Properties Testing Method Results

PipeSize A B C D E

Weightper 100

3/41

1-1/41-1/2

22-1/2

33-1/2

4568

10121416182024283036

1/41/43/83/83/81/21/21/21/21/25/85/83/47/87/87/8

111111

1-1/81-3/8

1-11/162

2-7/162-15/163-9/164-1/164-9/165-5/86-3/48-3/4

10-7/812-7/814-1/816-1/818-1/820-1/824-1/828-1/830-1/836-1/8

1-3/81-5/8

2-1/162-3/8

2-13/163-7/164-1/164-9/165-1/166-1/87-3/89-3/8

11-5/813-3/4

1517

19-1/821-1/825-1/829-1/831-1/837-1/8

2-3/42-3/42-7/8

33-1/83-3/4

44-1/44-1/2

55-1/87-1/88-3/89-5/8

10-1/411-1/412-5/813-5/815-5/817-5/818-5/821-5/8

2-3/82-3/82-1/22-1/22-1/2

33333

3-3/43-3/4

44-1/44-1/44-1/44-3/44-3/44-3/44-3/44-3/44-3/4

13143839429099

105115128239283479764820870

135014601710180019102320

Tensile StrengthElongationHeat Aging(168 hrs/121 °C)Tensile ElongationHeat ShockLow Temp. Flexibility (4hrs/-55 °C)Specific Gravity/Temperature Limitation

1500 psi min.300% min

1500 psi min

300% minNo cracks, flow or blisters

No cracking

0.96/200%

ASTM D412ASTM D412

ASTM D2671

ASTM D2671ASTM D2671

ASTM D2671

ASTM D792

Water AbsorptionCorrosive Effect(16hrs/175 °C)Fluid Resistance(24hrs/25 °C)Hydraulic Fluid (MIL-H-5606C)TensileElongationLubricating Oil (MIL-L-7808G)TensileElongationDiesel Fuel (MIL-L-23699)TensileElongation

0.2%

Pass

90% retained min90% retained min

90% retained min90% retained min

90% retained min90% retained min

ASTM D570ASTM D2671/Copper Rod

ASTM D412ASTM D412

ASTM D412ASTM D412

ASTM D412ASTM D412

Adhesion

Hardness (Shore D)

Impact Resistance

Salt Spray Resistance

Humidity Resistance

Taber Abrasion

Mandrel Bend

Melt Index

Gloss

ASTM D 4541, ASTM D 3359

ASTM D 2240

ASTM B 2794

ASTM b-117

ASTM D 2247

ASTM D 4060

ASTM D 522

ASTM D 1238

ASTM D 523

>800 PSI (test conducted on blasted substrate)52

>384 in./lbs.

>2,000 hours

No blistering or loss of gloss after 1,000 hours

100 (mg loss, CS 17 wheel)

1/8 inch, no cracks (>32%)

207

60 - 75

Prevent CorrosionThis is a typical example of accelerated corrosion occurring due to metal contact between the uncoated ubolt and the pipe. The excessive corrosion and pitting can eventually develop into pinhole leaks. This interaction can be completely eliminated by utilizing APS UBolt-Cote® in conjunction with Atlas Pipe Support® Pads.

ApplicationUBolt-Cote® is excellent for eliminating corrosion problems on piping in refineries, chemical plants, paper mills, offshore platforms, rigs and the shipping industry. It is also excellent for shock absorption on plastic, FRP or glass-lined pipe and will help to reduce vibration and noise levels.

Atlas Pipe Support® Pads

UBolt-Cote® & AtlAs PiPe sUPPort® PAds UBolt-Cote® & AtlAs PiPe sUPPort® PAds

®

The Atlas 180 and Atlas 360 pipe support pads are the best pipe support solution due to zero water absorption and with minimal contact between pad and pipe, the possibility of crevice corrosion is eliminated. Also, Atlas pads contain a UV additive to resist the harmful, degrading effects of sunlight.Note: Black pads provide better UV resistance than white pads. Both are made of high-density thermoplastic material.

Atlas 180 Atlas 360

“Strong Enough to Hold the World, Built to Hold Your Pipe”

ADVANTAGES

Versatility - with a wide variety of sizes available, UBolt-Cote® can be applied to all sizes of ubolts.

Protection - A rugged and durable covering, eliminating metal to metal contact.

Reliability - Virtually unaffected by heat, ultraviolet rays, vibration, electrolysis, sandblasting or other rigors conducive to an industrial and marine environment.

Ease of Installation - The ubolt size has been considered to accommodate the coating thickness assuring a good fit over the pipe.

FEATURES

UBolt-Cote® is a seamless, vulcanized, polyolefin material that can be applied to all types of ubolts. It is available on hot-dipped galvanized, Xylan (PTFE),carbon steel, and on stainless steel.

1/2 1/4 15/16 1-3/16 2-3/4 2-3/8 11

1 2 3

Page 4: UBolt-Cote Atlas Pipe Support Pads · lined pipe and will help to reduce vibration and noise levels. Atlas Pipe Support® Pads UBolt-Cote ® & AtlA s PiPe sUPPort® PAds UBolt-Cote

Optional Powder Coated UboltGeneral DescriptionThis product has a high flow, functionalized polyethylene copolymer-based thermoplastic powder coating designed for maximum mechanical performance, impact resistance and UV-stability. Application Data • Recommended thickness is a minimum of 50 mils, and a maximum of 70 mils. • Our proprietary material, Gal-vo-plast®, is also used as a powder coat on ubolts. The melting point of Gal-vo-plast® is 221 °F.

Galvanized long tangent ubolts ranging in sizes from 3/4” through 20” are stock items. Larger sizes available upon request. All assemblies include coated ubolts, 4 nuts and pad.

Dimensional Data

Physical Properties

Chemical Properties

B

C

E

D

A

Pipe Support Pad

Performance Properties Testing Method Results

PipeSize A B C D E

Weightper 100

3/41

1-1/41-1/2

22-1/2

33-1/2

4568

10121416182024283036

1/41/43/83/83/81/21/21/21/21/25/85/83/47/87/87/8

111111

1-1/81-3/8

1-11/162

2-7/162-15/163-9/164-1/164-9/165-5/86-3/48-3/4

10-7/812-7/814-1/816-1/818-1/820-1/824-1/828-1/830-1/836-1/8

1-3/81-5/8

2-1/162-3/8

2-13/163-7/164-1/164-9/165-1/166-1/87-3/89-3/8

11-5/813-3/4

1517

19-1/821-1/825-1/829-1/831-1/837-1/8

2-3/42-3/42-7/8

33-1/83-3/4

44-1/44-1/2

55-1/87-1/88-3/89-5/8

10-1/411-1/412-5/813-5/815-5/817-5/818-5/821-5/8

2-3/82-3/82-1/22-1/22-1/2

33333

3-3/43-3/4

44-1/44-1/44-1/44-3/44-3/44-3/44-3/44-3/44-3/4

13143839429099

105115128239283479764820870

135014601710180019102320

Tensile StrengthElongationHeat Aging(168 hrs/121 °C)Tensile ElongationHeat ShockLow Temp. Flexibility (4hrs/-55 °C)Specific Gravity/Temperature Limitation

1500 psi min.300% min

1500 psi min

300% minNo cracks, flow or blisters

No cracking

0.96/200%

ASTM D412ASTM D412

ASTM D2671

ASTM D2671ASTM D2671

ASTM D2671

ASTM D792

Water AbsorptionCorrosive Effect(16hrs/175 °C)Fluid Resistance(24hrs/25 °C)Hydraulic Fluid (MIL-H-5606C)TensileElongationLubricating Oil (MIL-L-7808G)TensileElongationDiesel Fuel (MIL-L-23699)TensileElongation

0.2%

Pass

90% retained min90% retained min

90% retained min90% retained min

90% retained min90% retained min

ASTM D570ASTM D2671/Copper Rod

ASTM D412ASTM D412

ASTM D412ASTM D412

ASTM D412ASTM D412

Adhesion

Hardness (Shore D)

Impact Resistance

Salt Spray Resistance

Humidity Resistance

Taber Abrasion

Mandrel Bend

Melt Index

Gloss

ASTM D 4541, ASTM D 3359

ASTM D 2240

ASTM B 2794

ASTM b-117

ASTM D 2247

ASTM D 4060

ASTM D 522

ASTM D 1238

ASTM D 523

>800 PSI (test conducted on blasted substrate)52

>384 in./lbs.

>2,000 hours

No blistering or loss of gloss after 1,000 hours

100 (mg loss, CS 17 wheel)

1/8 inch, no cracks (>32%)

207

60 - 75

Prevent CorrosionThis is a typical example of accelerated corrosion occurring due to metal contact between the uncoated ubolt and the pipe. The excessive corrosion and pitting can eventually develop into pinhole leaks. This interaction can be completely eliminated by utilizing APS UBolt-Cote® in conjunction with Atlas Pipe Support® Pads.

ApplicationUBolt-Cote® is excellent for eliminating corrosion problems on piping in refineries, chemical plants, paper mills, offshore platforms, rigs and the shipping industry. It is also excellent for shock absorption on plastic, FRP or glass-lined pipe and will help to reduce vibration and noise levels.

Atlas Pipe Support® Pads

UBolt-Cote® & AtlAs PiPe sUPPort® PAds UBolt-Cote® & AtlAs PiPe sUPPort® PAds

®

The Atlas 180 and Atlas 360 pipe support pads are the best pipe support solution due to zero water absorption and with minimal contact between pad and pipe, the possibility of crevice corrosion is eliminated. Also, Atlas pads contain a UV additive to resist the harmful, degrading effects of sunlight.Note: Black pads provide better UV resistance than white pads. Both are made of high-density thermoplastic material.

Atlas 180 Atlas 360

“Strong Enough to Hold the World, Built to Hold Your Pipe”

ADVANTAGES

Versatility - with a wide variety of sizes available, UBolt-Cote® can be applied to all sizes of ubolts.

Protection - A rugged and durable covering, eliminating metal to metal contact.

Reliability - Virtually unaffected by heat, ultraviolet rays, vibration, electrolysis, sandblasting or other rigors conducive to an industrial and marine environment.

Ease of Installation - The ubolt size has been considered to accommodate the coating thickness assuring a good fit over the pipe.

FEATURES

UBolt-Cote® is a seamless, vulcanized, polyolefin material that can be applied to all types of ubolts. It is available on hot-dipped galvanized, Xylan (PTFE),carbon steel, and on stainless steel.

1/2 1/4 15/16 1-3/16 2-3/4 2-3/8 11

1 2 3

Page 5: UBolt-Cote Atlas Pipe Support Pads · lined pipe and will help to reduce vibration and noise levels. Atlas Pipe Support® Pads UBolt-Cote ® & AtlA s PiPe sUPPort® PAds UBolt-Cote

Other PrOducts AvAilAble• Kleerband® Flange Band Protectors• Radolid® Bolt & Nut Protection Caps• Casing Spacers and End Seals• Innerlynx® - Modular Mechanical Seals• IsoJoint® - Monolithic Isolators• Foreman Nite Caps - Temporary Pipe Plugs• Standard Isolating Gasket Kits• Integra SSA® - Cathodic Isolating Gasket Kits

tO Order PleAse sPecify the fOllOwing1. Pipe Size2. Material: Carbon steel or stainless steel3. Coating: Galvanized or Xylan (PTFE)4. Pad: Buna-N, viton or thermoplastic

Advance Products & Systems, LLC is not responsible for errors printed in this brochure.

I S O - 9 0 0 1 : 2 0 1 5 Ce r t i f i e d Co m p a n y - F M 5 3 7 4 0 5

Advance Products & Systems, LLC shall repair or replace (within the limitations of such applicable express written warranty as may be issued by it) any product or portions thereof, which prove to be defective in workmanship or material for a period of 12 months from shipment date. The foregoing in lieu of all warranties, express or implied, and all other obligations or liabilities on the part of APS, on account of the product which it may sell. In no event shall APS be liable for consequential or special damages: nor except as it may otherwise specifically agree in writing, installation, or other work which may be done upon or in connection with the product by APS/ the distribution / dealer or others. THE LIMITED WARRANTIES PROVIDED IN THIS AGREEMENT AND THE OBLIGATIONS AND LIABILITIES OF APS ARE THE ONLY WARRANTIES MADE BY APS AS TO THE PRODUCT. APS MAKES NO EXPRESS OR OTHER IMPLIED WARRANTIES, BY COURSE OF DEALING, USAGE OF TRADE, MERCHANTABILITY, FITNESS FOR A PARTICULAR USE (WHETHER GENERAL OR SPECIFIC), OR OTHERWISE.

REV 122018

P. O. Box 60399 • Lafayette, Louisiana 70596-0399800-315-6009 • 337-233-6116 • FAX: 337-232-3860Email: [email protected] • Website: www.apsonline.com

UBolt-Cote®

&

Atlas Pipe Support® Pads

Distributed by:Properties Atlas Pipe support® ht results (Amber)

Atlas Pipe support® Xt* results (beige)

testing Method

Density 0.0462 lb/in³ 0.047 lb/in³ D792Water Absorption, 24 hours 0.25% 0.10 D570Tensile Srength 16,500 psi 16,000 psi D638Tensile Modulus 500 ,000 psi 500,000 psi D638Tensile Elongation at Break 80% 20% D638Flexural Strength 20,000 psi 25,000 psi D790Flexural Modulus 500,000 psi 600,000 psi D790Compressive Strength 22,000 psi 20,000 psi D695Compressive Modulus 480,000 psi 500,000 psi D695Coefficient of Friction 0.42 0.40 N/A QTM 55007Hardness, Rockwell, M/R 112/125 100/126 D785IZOD Notched Impact 0.5 ft-lb/in 1.0 ft-lb/in D256

Coefficient of Linear Thermal Expansion 3.1 2.6 E831Maximum Operating Temperature 340° F (171° C) 480° F (249° C)Melting Point 410° F (210 °C) 644° F (340° C) D3418Heat Deflection Temperature at 264 psi 400° F (204°C) 320° F (160° C) D648Flammability Rating V-0 V-0 UL94Dielectric Strength, short-term 830 V/mil 480 V/mil D149

Extreme Temperature UBolt-Cote® & Atlas Pipe Support® Pads

Properties ht ubolt -cote® results

Xt ubolt-cote® results

Continuous Operating Temperature Max 302° F(150° C or 175° C)

-454° F to 500° F(-270° C to 260° C)

UBolt-Cote®Extreme temperature UBolt-Cote are available in HT and XT materials. Both materials offer excellent chemical resistance, low coefficient of friction, and excellent UV resistance.

Atlas Pipe Support® PadsExtreme temperature pads are available in Atlas Pipe Support® HT and Atlas Pipe Support® XT* materials. Both materials offer excellent chemical resistance, low moisture absorption, and are not affected by continuous exposure to hot water and steam environments. Atlas Pipe Support® HT pads offer excellent chemical resistance.

Atlas Pipe Support®HT Pad

Atlas Pipe Support® XT* Pad

UBolt-Cote® HTUBolt-Cote® XT

UBolt-Cote® HT withAtlas Pipe Support®

HT PadMax Operating Temp:

302° F

UBolt-Cote® XT withAtlas Pipe Support®

XT* PadMax Operating Temp:

480° F

4

Page 6: UBolt-Cote Atlas Pipe Support Pads · lined pipe and will help to reduce vibration and noise levels. Atlas Pipe Support® Pads UBolt-Cote ® & AtlA s PiPe sUPPort® PAds UBolt-Cote

Other PrOducts AvAilAble• Kleerband® Flange Band Protectors• Radolid® Bolt & Nut Protection Caps• Casing Spacers and End Seals• Innerlynx® - Modular Mechanical Seals• IsoJoint® - Monolithic Isolators• Foreman Nite Caps - Temporary Pipe Plugs• Standard Isolating Gasket Kits• Integra SSA® - Cathodic Isolating Gasket Kits

tO Order PleAse sPecify the fOllOwing1. Pipe Size2. Material: Carbon steel or stainless steel3. Coating: Galvanized or Xylan (PTFE)4. Pad: Buna-N, viton or thermoplastic

Advance Products & Systems, LLC is not responsible for errors printed in this brochure.

I S O - 9 0 0 1 : 2 0 1 5 Ce r t i f i e d Co m p a n y - F M 5 3 7 4 0 5

Advance Products & Systems, LLC shall repair or replace (within the limitations of such applicable express written warranty as may be issued by it) any product or portions thereof, which prove to be defective in workmanship or material for a period of 12 months from shipment date. The foregoing in lieu of all warranties, express or implied, and all other obligations or liabilities on the part of APS, on account of the product which it may sell. In no event shall APS be liable for consequential or special damages: nor except as it may otherwise specifically agree in writing, installation, or other work which may be done upon or in connection with the product by APS/ the distribution / dealer or others. THE LIMITED WARRANTIES PROVIDED IN THIS AGREEMENT AND THE OBLIGATIONS AND LIABILITIES OF APS ARE THE ONLY WARRANTIES MADE BY APS AS TO THE PRODUCT. APS MAKES NO EXPRESS OR OTHER IMPLIED WARRANTIES, BY COURSE OF DEALING, USAGE OF TRADE, MERCHANTABILITY, FITNESS FOR A PARTICULAR USE (WHETHER GENERAL OR SPECIFIC), OR OTHERWISE.

REV 122019

P. O. Box 60399 • Lafayette, Louisiana 70596-0399800-315-6009 • 337-233-6116 • FAX: 337-232-3860Email: [email protected] • Website: www.apsonline.com

UBolt-Cote®

&

Atlas Pipe Support® Pads

Distributed by:Properties Atlas Pipe support® ht results (Amber)

Atlas Pipe support® Xt* results (beige)

testing Method

Density 0.0462 lb/in³ 0.047 lb/in³ D792Water Absorption, 24 hours 0.25% 0.10 D570Tensile Srength 16,500 psi 16,000 psi D638Tensile Modulus 500 ,000 psi 500,000 psi D638Tensile Elongation at Break 80% 20% D638Flexural Strength 20,000 psi 25,000 psi D790Flexural Modulus 500,000 psi 600,000 psi D790Compressive Strength 22,000 psi 20,000 psi D695Compressive Modulus 480,000 psi 500,000 psi D695Coefficient of Friction 0.42 0.40 N/A QTM 55007Hardness, Rockwell, M/R 112/125 100/126 D785IZOD Notched Impact 0.5 ft-lb/in 1.0 ft-lb/in D256

Coefficient of Linear Thermal Expansion 3.1 2.6 E831Maximum Operating Temperature 340° F (171° C) 480° F (249° C)Melting Point 410° F (210 °C) 644° F (340° C) D3418Heat Deflection Temperature at 264 psi 400° F (204°C) 320° F (160° C) D648Flammability Rating V-0 V-0 UL94Dielectric Strength, short-term 830 V/mil 480 V/mil D149

Extreme Temperature UBolt-Cote® & Atlas Pipe Support® Pads

Properties ht ubolt -cote® results

Xt ubolt-cote® results

Continuous Operating Temperature Max 302° F(150° C or 175° C)

-454° F to 500° F(-270° C to 260° C)

UBolt-Cote®Extreme temperature UBolt-Cote are available in HT and XT materials. Both materials offer excellent chemical resistance, low coefficient of friction, and excellent UV resistance.

Atlas Pipe Support® PadsExtreme temperature pads are available in Atlas Pipe Support® HT and Atlas Pipe Support® XT* materials. Both materials offer excellent chemical resistance, low moisture absorption, and are not affected by continuous exposure to hot water and steam environments. Atlas Pipe Support® HT pads offer excellent chemical resistance.

Atlas Pipe Support®HT Pad

Atlas Pipe Support® XT* Pad

UBolt-Cote® HTUBolt-Cote® XT

UBolt-Cote® HT withAtlas Pipe Support®

HT PadMax Operating Temp:

302° F

UBolt-Cote® XT withAtlas Pipe Support®

XT* PadMax Operating Temp:

480° F

4


Recommended