UNDER CABINET • TEL 1-877-375-5555 • fax 1-877-375-3333 2 Elite LED link Slim profile Great...

UNDER CABINETL I G H T I N G

www.IUSEELITE.com • TEL 1-877-375-5555 • fax 1-877-375-33332

Elite LED link

Slim profile

Great performance

The Ultra efficient, maintenance free, LED Link luminaire is slim and beautifully contoured in a low-

profile housing, with an anodized aluminum finish.

Elite Lighting’s LED Link luminaires feature 1-watt high-output LED s in 3000, 3500, 4100

and 5000 degrees Kelvin color temperatures. With up to 55 lumens-per-watt and

187 lumens-per-foot, it is one of the most energy saving products in the lighting

industry. Its rated life of 50,000-hours equals over 10 years of maintenance free

operation when operating 12 hours per day. It consumes less than one-

eighth the energy of halogen and xenon lighting.

This high output LED technology has no forward projected heat

or harmful UV. It is California Title 24 compliant. It offers a

combination of connector cables and mounting brackets

that install at different angles, thus, it provides the

highest level of contractor friendly installations.


ACTUAL SIZE

WIDTH= .75”

HEIGHT= .5”

The energy consumed by LED s is far less than

incandescents; studies have shown as much as a

75% decrease in the power consumed.

The life of LED lighting is much longer

than incandescents and significantly longer

than fluorescents. The LED s used in

LED Link are rated to 50,000 hours. By

comparison, incandescent lamps are rated

for about 2,000 hours and fluorescent

lamps are rated for about 20,000 hours.

24-hour operation for 6 years will require

incandescent lamps to be replaced 13

times. fluorescent lamps will have been

replaced once. LED Link will continue to

operate for 5 additional years.


EUM-LED-AC -4 / EUM-LED-AC -4

ExTENSIoN coUPLER TYPIcaL

INSTaLLaTIoN

EUM-LED-AC -1

INTERNaL coNNEcToR

TYPIcaL INSTaLLaTIoN

EUM-LED-AC -2

moUNTING cLIP

TYPIcaL INSTaLLaTIoN

EUM-LED-AC -3

moUNTING cLIP TYPIcaL

INSTaLLaTIoN

Elite’s LED Link offers you a variety of color choices, sizes and

mounting options that will meet your project needs


Applications:

LED applications and uses continue to grow. At first, were used in direct view applications, such as traffic lights and billboard signs. Today, LED s are used to light coves and accent pathways.

Product Features:

:: Maximized performance, specification grade, LED strip in

:: custom anodized housing:: Tool-less wire-way access.:: A vailable in pre-cut sections allowing field

assembly to every 6 inches:: 6”, 12”, 24”, 36” and 48” are standard every

fixture.:: Engineered to eliminate ‘dark zones’:: CRI = 80:: VWF – Very Wide Flood. Distribution of 120°:: Chip spacing – 1” on center:: Uses 24v AC /DC input:: Dimmable on low voltage Lutron dimmers:: 40’ max run length:: Life rated at 50,000 hours:: Built-in circuitry protects against short circuits Up

to 55 LP W:: No UV • No IR • No mercury • No lead • No PC Bs

• No Asbestos

PERfoRmaNcE DaTa

LENGHT

6”

12”

24”

36”

48”

LENGHT

6”

12”

24”

36”

48”

LENGHT

6”

12”

24”

36 ”

48”

oRDERING GUIDE

6”

12”

24”

36”

48”

EUM-LED

SERIES LENGTH VoLTaGE coLoR TEmPERaTURE

30K

35K

41K

50K

24VEUM-LED

Width= .75”

Height= .5”

6”

12”

24”

36”

48”

TOP

SIDE

LENGTH

Dimension:


HARD WIRED - DIMMABLE DRIVERS

Approximate Sizes and Weight

PaRT#

EUm-ELa -75-24

EUm-ELa -150-24

EUm-ELa -300-24

EUM-EV24-150

EUM-EV24-200

EUm-oDx-250S-24

EUM-EV24-300

EUm-oDx -500

EUm-oDx -600S

EUm-oDx -750S-24

EUm-oDx -1000

EUm-oDx -1200S

Type

Electronic

Electronic

Electronic

Magnetic

Magnetic

Magnetic

Magnetic

Magnetic

Magnetic

Magnetic

Magnetic

Magnetic

Output(24V)

1@75 watts

1@150 watts

1@300 watts

1@150 watts

1@200 watts

1@250 watts

1@300 watts

1@500 watts

1@600 watts

2@375 watts

2@500 watts

2@600 watts

Depth

1-3/8”

1-3/8”

1-1/16”

2-15/16”

2-15/16”

3-3/8”

3-3/8”

4-1/4”

4-1/4”

4-1/4”

4-15/32”

5-7/16”

Height

6-1/2”

6-1/2”

5-3/16”

7-9/16”

7-9/16”

8-1/16”

8-1/16”

9-7/16”

9-7/16”

9-7/16”

8-13/32”

10-9/16”

Width

1-1/2”

1-1/2”

1-1/2”

3-1/16”

3-1/16”

4-3/16”

4-3/16”

4-11/16”

4-11/16”

4-11/16”

7-13/16”

6-3/4”

Weight

1 lb

1 lb

1 lb

10 lbs.

12 lbs.

16 lbs.

16 lbs.

20 lbs.

20 lbs.

28 lbs.

32 lbs.

35 lbs.

DIMMABLE COMPACT LED AC 227V MAGNETIC DRIVERS


PaRT#

EUm-ac-24-40-277

EUm-ac-24-50-277

EUm-ac-24-60-277

EUm-ac-24-100-277

Input(277V)

1@40 watts

1@50 watts

1@60 watts

1@100 watts

Output(24V)

24V

24V

24V

24V

Depth

2.14”

2.14”

2.59”

2.59”

Height

5.03”

5.03”

6.06”

6.06”

Width

2”

2”

2.2”

2.2”

Width

2”

2”

2.2”

2.2”

DIMMABLE COMPACT LED AC 120V MAGNETIC DRIVERS


PaRT#

EUm-ac-24-40-120

EUm-ac-24-50-120

EUm-ac-24-60-120

EUm-ac-24-100-120

Input(120V)

1@40 watts

1@50 watts

1@60 watts

1@100 watts

Output(24V)

24V

24V

24V

24V

Depth

2.14”

2.14”

2.59”

2.59”

Height

5.03”

5.03”

6.06”

6.06”


Extension Couplerallows for space between LED -LIN KSEUm-LED-acc-4 (12” ExTENSIoN)EUm-LED-acc-5 (24” ExTENSIoN)EUm-LED-acc-6 (48” ExTENSIoN)

EUM-LED-DRIVER-50W-24V

Extended cord driver50w max extended power cord driver

EUM-LED-ACC-3 - MOUNTING CLIP

for flat surfaces

Connects LED-LINK to direct Driver

EUM-LED-HW-12 (12” connector)EUM-LED-HW-24 (24” connector)

EUM-LED-ACC-1

Internal ConnectorJoins Two pieces of LED -LIN KS & addsZero length

EUM-LED-ACC-2 - MOUNTING CLIP

for mounting LED -LIN KS at 45º in a corner

Connects LED-LINK to direct Driver

EUm-LED-acc-7 (12” ExTENSIoN)EUm-LED-acc-8 (24” ExTENSIoN)

EUM-LED-DRIVER-24W-24V

Plug in driver24w max

fL

Uo

RE

Sc

EN

T U

ND

ER

ca

bIN

ET

LIG

HT

ING


fLUoREScENT UNDERcabINET L IGHTING

8

EU-12

EU-21

EU-24

EU-33

EU-42

H

W

L

Polycarbonate Lens with - UV radiation protection

POST PAINTED

FIXTURE LAMP TYPE (INCLUDED) FIXTURE DIMENSIONOPTIONSVOLTAGE

❏ EU-12

❏ EU-21

❏ EU-24

❏ EU-33

❏ EU-42

(1) f8 T5

(1) f13 T5

(2) f8 T5

(1) f8 and f13 T5

(2) f13 T5

❏ 120 V (Standard)

❏ 227 V (Optional)

❏ (Sw) Rocker switch (120V only)

❏ (Rc) Grounded outlet (120V only)

❏ (CS) 6’, 3-wire grounded cordset

12-1/4” L x 5” w x 1-1/8” THIcK

21-1/4” L x 5” w x 1-1/8” THIcK

24-1/2” L x 5” w x 1-1/8” THIcK

33-1/2” L x 5” w x 1-1/8” THIcK

42-1/2” L x 5” w x 1-1/8” THIcK

Features:

:: Easy-fit cover channel attachment.:: Tool-less wire-way access.:: Detachable channel cover gives hands-free wiring

and quick installation.:: Romex/BX conduit connector included with

every fixture.:: Soft-lumens, linear prismatic diffuser gives better

visual comfort.:: Available with factory-installed lamp, rocker switch,

cordset and outlet options.:: Knockouts available at the back, side and rear

for easy installation:: Available keyhole mounting slots on the back

Specifications:

:: BallastNormal power factor electronic type ballast standard.

:: ElectricalFixture conforms to UL 1570 and is suitable for damp locations.

Finish

U.V. coated rust resistance. Painted parts finished with polyester powder coating. 22 gauge die-formed steel housing.

listing

UL/CUL listed and labeled.

COLOR OPTIONS

White (WH), Black (BK), Bronze (BZ)


fL

Uo

RE

Sc

EN

T U

ND

ER

ca

bIN

ET

LIG

HT

ING


9

EZU-18-T8/T12E

EZU-24-T8/T12E

EZU-36-T12EEXU-36-T8E

EZU-48-T12EEXU-48-T8E

Polycarbonate Lens with - UV radiation protection

POST PAINTED

FIXTURE DIMENSIONOPTIONSVOLTAGELAMP TYPE (INCLUDED)FIXTURE

❏ EZU-18-T8/T12-E

❏ EZU-24-T8/T12-E

❏ EZU-36-T8/T12-E

❏ EZU-48-T8/T12-E

❏ EZU-36-T12-E

❏ EZU-48-T12-E

❏ ExU-36-T8-E

❏ ExU-48-T8-E

(1) f15 T8 / f15 T12

(1) f20 T8 / f20 T12

(1) f25 T8 / f30 T12

(1) f25 T8 / f30 T12

(1) f30 T12

(1) f34 T12

(1) f25 T8

(1) f32 T8






❏ (L) Lamp

aDVaNcE DImmING

❏ aDVaNcE maRK 7

❏ aDVaNcE maRK 10

18” L x 5” w x 1-3/4” THIcK

24” L x 5” w x 1-3/4” THIcK

36” L x 5” w x 1-3/4” THIcK

48” L x 5” w x 1-3/4” THIcK

36” L x 5” w x 1-3/4” THIcK

48” L x 5” w x 1-3/4” THIcK

36” L x 5” w x 1-3/4” THIcK

48” L x 5” w x 1-3/4” THIcK

Features:


and quick installation.:: Romex/BX conduit connector included with every

fixture.:: Soft-lumens, linear prismatic diffuser gives better


cordset and outlet options.:: Knockouts available at the back, side and rear for easy

installation:: Available keyhole mounting slots on the back

Specifications:



Finish


listing


H

W

L

fL

Uo

RE

Sc

EN

T U

ND

ER

ca

bIN

ET

LIG

HT

ING



1 0

Specifications:

:: Fully adjustable (900 Tilt):: 1-1/8” profile:: Snap together design:: Aluminum extrusion body:: Fully electronic ballast:: On and Off switch:: Available keyhole mounting slots on the back:: Properly wired and ready for installation:: Plug-in:: UL listed

FIXTURE LAMP FIXTURE DIMENSION

f8 T5

f13 T5

f21 T5

EUT-12

EUT-21

EUT-34

Length

width

height

EUT-12

EUT-21

EUT-34

FIXTURE DIMENSION

13-5/8” L x 3-5/8” w x 1-1/8” THIcK

22-5/8” L x 3-5/8” w x 1-1/8” THIcK

35-5/8” L x 3-5/8” w x 1-1/8” THIcK

www.IUSEELITE.com • TEL 1-877-375-5555 • fax 1-877-375-33331 1

6’ PowER coRD6” fLExIbLE coUPLINGcoUPLING 12” fLExIbLE coUPLING 6’ fLExIbLE coUPLING

EUT-2EUT-1 EUT-3 EUT-4 EUT-6

a c c E S S o R I E S

fL

Uo

RE

Sc

EN

T U

ND

ER

ca

bIN

ET

LIG

HT

ING



1 2

FIXTURE DIMENSIONOPTIONSVOLTAGELAMP TYPE (INCLUDED)FIXTURE

❏ EUm-T5-12-8w-120

❏ EUm-T5-22-14w-120

❏ EUm-T5-35-21w-120

❏ EUm-T5-46-28w-120

❏ EUm-T5-58-35w-120

(1) f15 T5

(1) f20 T5 / f20 T5

(1) f25 T5 / f30 T5

(1) f25 T5 / f30 T5

(1) f30 T5

❏ 120 V (Standard) ❏ (Sw) Rocker switch (120V only)


❏ (cS) 6’, 3-wire grounded cordset

❏ (L) Lamp

aDVaNcE DImmING

❏ aDVaNcE maRK 7

❏ aDVaNcE maRK 10

3/8” L x 5/8” w x 15/16” THIcK

5/8” L x 1-5/8”” w x 15/16” THIcK

1/2” L x 1-5/8”” w x 15/16” THIcK

1/8” L x 1-5/8”” w x 15/16” THIcK

1/16” L x 1-5/8”” w x 15/16” THIcK

Features:

:: Built-in electronic ballast.:: Tool-less wire-way access.:: Energy efficient-only 8,14, 21, 28 and 35 W.:: Uses standard T-5 lamps.:: Plug-in modular system permits easy connection for

continuous lighting.:: Extremely long lamp life, manufacturer rated for

20,000 hrs.:: Available in four different lengths: 1’ (12-3/8”), 2’ (22-

5/8”), 3’ (34-1/2” ), 4’ (46-1/2”) and 5’ (58-1/16”) width: 15/16”, height: 1-5/8”.

:: Acrylic Cover is standard.:: Contemporary white housing.

The new T5 Bright Link is the solution for longer runs. The fixture is easy to install with a snap-in system. You can also combine several fixtures effortlessly. The modular connecting system makes it a breeze to create long, continuous lines of fluorescent lighting to fit any space. Its high-light output and an extremely low heat index make the SlimLite ideal for displays and cases.The T5 Bright Link offers these distinctive benefits: It‘s cooler, brighter and more compact. Available in 1’,2’, 3’, 4’ and 5’ lengths. This enables continuous rows of light up to 35 linear feet––making the T5 Bright Link the perfect lighting system for gondolas, store fixtures and long runs of shelves. T5 Bright Link features standard T-5 lamps, which are available in a variety of light colors.

W

L


fL

Uo

RE

Sc

EN

T U

ND

ER

ca

bIN

ET

LIG

HT

ING


1 3

A C C E S S O R I E S

LINK coNNEcToR 6” fLExIbLE wIRE

coNNEcToR

6’ PowER coRD

EUM-4EUM-2EUM-1

STaINLESS STEEL

moUNTING cLIP

PoLYcaRboNaTE

moUNTING cLIP

HaRDwIRE box

EUT-9EUM-8EUM-7

fL

Uo

RE

Sc

EN

T U

ND

ER

ca

bIN

ET

LIG

HT

ING



1 4


❏ EUS-12

❏ EUS-21

❏ EUS-24

❏ EUS-33

❏ EUS-42

(1) f8 T5

(1) f13 T5

(2) f8 T5

(1) f8 and f13 T5

(2) f13 T5






12-1/4” L x 5” w x 1-1/8” THIcK

21-1/4” L x 5” w x 1-1/8” THIcK

24-1/2” L x 5” w x 1-1/8” THIcK

33-1/2” L x 5” w x 1-1/8” THIcK

42-1/2” L x 5” w x 1-1/8” THIcK

Features:







Specifications:



Finish


listing

UL/CUL listed and labeled.H

W

L


xE

No

N U

ND

ER

ca

bIN

ET

LIG

HT

ING

XENON UNDERcabINET L IGHTING

1 5


❏ EUx-8

❏ EUx-12

❏ EUx-21

❏ EUx-30

(1) xENoN

(1) xENoN

(1) xENoN

(1) xENoN






8-1/4” L x 5” w x 1-1/8” THIcK

12-1/4” L x 5” w x 1-1/8” THIcK

21-1/2” L x 5” w x 1-1/8” THIcK

30-1/2” L x 5” w x 1-1/8” THIcK

Features:







Specifications:



Finish


listing


H

W

L

EUX-30

EUX-21

EUX-12

EUX-8

LIN

E V

oL

Ta

GE

UN

DE

Rc

ab

INE

T L

IGH

TIN

G

LINE VOLTAGE UNDERcabINET L IGHTING


LIN

E V

oL

Ta

GE

UN

DE

Rc

ab

INE

T L

IGH

TIN

G

1 6

1-1/4 Inch Line Voltage Xenon Under Cabinet

This versatile series of super bright line voltage under cabinet lighting fixture is only 1-1/4 inch in depth is designed for shallow spaces where higher levels of light is required.

Features:

:: No transformer required:: Aluminum Extrusion body:: 2,000 hours, 120V 25W xenon JC bulbs included :: Plug-in or hard wire :: Two level switch: high and low :: Fully dimmable with any standard dimmer :: Frosted lenses :: ETL listed

CATALOG# LAMP COLOR OPTIONS FIXTURE DIMENSION

35w, 120V, G8, xENoN JcD

2-35w, 120V, G8, xENoN JcD



EUL-8

EUL-16

EUL-24

EUL-32

white (wH), Satin Nickel (SN)

Black (BK), Bronze (BZ)

H

WL

EUL-8WH

EUL-16SN

EUL-24BZ

EUL-32WH

13-5/8” L x 3-5/8” w x 1-1/8” THIcK

22-5/8” L x 3-5/8” w x 1-1/8” THIcK

35-5/8” L x 3-5/8” w x 1-1/8” THIcK

47-5/8” L x 3-5/8” w x 1-1/8” THIcK


LIN

E V

oL

Ta

GE

UN

DE

Rc

ab

INE

T L

IGH

TIN

G

LINE VOLTAGE UNDERcabINET L IGHTING


LIN

E V

oL

Ta

GE

UN

DE

Rc

ab

INE

T L

IGH

TIN

G

1 8

This versatile series of super bright line voltage under cabinet lighting fixture is only 1 inch in depth is designed for shallow spaces where higher levels of light is required.

Features:

:: No transformer required:: Aluminum Extrusion body:: 2,000 hours, 120V 25W JC bulbs included :: Plug-in or hard wire :: Two level switch: high and low :: Fully dimmable with any standard dimmer :: Frosted lenses :: ETL listed

CATALOG# LAMP COLOR OPTION FIXTURE DIMENSION

2 x 20w

3 x 20w

EZUL-13

EZUL-20

white (w), Satin Nickel (SN), Gold(Pb)

white (w), Satin Nickel (SN), Gold(Pb)

CATALOG# DESCRIPTION

Coupling

6” flexible connector



END caP

EZUL-1

EZUL-2

EZUL-3

EZUL-4

EZUL-5

1 Inch Line Voltage H alogen Under Cabinet

H

W

L

EZUL-20SN

EZUL-13WH

13” L x 2” w x 1” THIcK

20-1/2” L x 2” w x 1” THIcK


UN

DE

Rc

ab

INE

T L

IGH

TIN

G f

LU

oR

ES

cE

NT

RECESSED UNDERcabINET L IGHTING


RE

cE

SS

ED

UN

DE

Rc

ab

INE

T L

IGH

TIN

G

2 0

HU-09SNSurface/Recessed

Max. Lamp Wattage 20w 12v jc Lamp

*Must use w i th reMote transforMer (not prov ided)

Description:

:: Die-cast aluminum body:: May be mounted recessed or surface (mounting ring supplied):: Max. lamp wattage: (1) one-12v 20w JC lamp included:: Includes 12” wire leads and connector:: Ceiling opening is 2-1/8”

wh white ch chroMe

cp copperbk blackpb polish brass

sn satin nickel

Finish:

HU-09CH

HU-09WH

HU-09PB

HU-09BK

HU-09CP

HU-09SN

NEW

UN

DE

Rc

ab

INE

T L

IGH

TIN

G f

LU

oR

ES

cE

NT



RE

cE

SS

ED

UN

DE

Rc

ab

INE

T L

IGH

TIN

G

2 2

7/8”

3/4”

1-1/8”

HU-10WHSurface/Recessed

Max. Lamp Wattage 20w 120V JCDGY8 Lamp

Description:

:: Fiber-plastic body

:: May be mounted recessed or surface (mounting ring supplied)

:: Includes 4’ wire leads and plug:: Ceiling opening is 2-1/8”

NEW

wh white ch chroMe


sn satin nickel

Finish:


HU-10WH


HU-10BK HU-10SN HU-10WH HU-10PB HU-10CH

UN

DE

Rc

ab

INE

T L

IGH

TIN

G f

LU

oR

ES

cE

NT



RE

cE

SS

ED

UN

DE

Rc

ab

INE

T L

IGH

TIN

G

2 4

7/8”

3/4”

7/8”

3/4”

HU-04WH

SURfacE/REcESSED

HU-05WH

SURfacE/REcESSED

Description:

:: Die-cast aluminum body:: May be mounted recessed or surface (mounting ring supplied):: Max. lamp wattage: (1) one-12v 20w JC lamp included:: Includes 12” wire leads and connector:: Ceiling opening is 2-1/8”

B r i l l i a n c e S e r i e s

UN

DE

Rc

ab

INE

T L

IGH

TIN

G f

LU

oR

ES

cE

NT



RE

cE

SS

ED

UN

DE

Rc

ab

INE

T L

IGH

TIN

G

2 6

Description:

:: Die-cast aluminum body:: May be mounted recessed or surface (mounting ring supplied):: Max. lamp wattage: (1) one-12v 20w JC lamp included:: Includes: Three fixtures with quick connectors and mounting

hardware. One 60W electronic transformer with 6’ cord, screws and a four way connector.

:: Ceiling opening is 2-1/8”:: 2W LED Warm White*:: To be used with 12V transformers.*

Max. Lamp Wattage 20w 12v JC LampOUTSIDE DIAMETER 2-5/8”

HU-02PBSurface/Recessed

LED-HU-02PBSurface/Recessed

HU-02BK

HU-02CP HU-02SN

HU-02CH

wh white ch chroMe


sn satin nickel

Finish:

HU-02PB

RE

cE

SS

ED

UN

DE

Rc

ab

INE

T L

IGH

TIN

G



2 7

HU-03PBSurface/Recessed

LED-HU-03PBSurface/Recessed

Max. Lamp Wattage 20w 12v JC Lamp

Description:

:: Fiber-plastic body

:: May be mounted recessed or surface (mounting ring supplied)

:: Includes 4’ wire leads and plug:: Ceiling opening is 2-1/8”

wh white ch chroMe


sn satin nickel

Finish:


HU-03CP

HU-03SN

HU-03WH HU-03PB

HU-03CH

UN

DE

Rc

ab

INE

T L

IGH

TIN

G f

LU

oR

ES

cE

NT



RE

cE

SS

ED

UN

DE

Rc

ab

INE

T L

IGH

TIN

G

2 8

7/8”

3/4”

Max. Lamp Wattage 20w 12v JC Lamp

Description:

:: Die-cast aluminum body:: May be mounted recessed or surface (mounting ring supplied):: Max. lamp wattage: (1) one-12v 20w JC lamp included:: Includes 12” wire leads and connector:: Ceiling opening is 2-1/8”:: 2W LED Warm White*:: To be used with 12V transformers.*

HU-08WHSurface/Recessed

LED-HU-08WHSurface/Recessed

wh white ch chroMe


sn satin nickel

Finish:


HU-08WH

HU-08WH

HU-08CP

HU-08BK

HU-08PB

RE

cE

SS

ED

UN

DE

Rc

ab

INE

T L

IGH

TIN

G



2 9

W, BK, CH, PB, SN, CP

HU-08-3LED-HU-08-3

FINISH


HU-03-3LED-HU-03-3

FINISH


HU-02-3LED-HU-02-3

FINISH

Description:

:: Die-cast aluminum body:: May be mounted recessed or surface (mounting ring supplied):: Max. lamp wattage: (1) one-12v 20w JC lamp included:: Includes: Three fixtures with quick connectors and mounting

hardware. One 60W electronic transformer with 6’ cord, screws and a four way connector.

:: Ceiling opening is 2-1/8”:: 2W LED Warm White*:: To be used with 12V transformers.*

Max. Lamp Wattage 20w 12v JC LampOUTSIDE DIAMETER 2-5/8”

UN

DE

Rc

ab

INE

T L

IGH

TIN

G f

LU

oR

ES

cE

NT



RE

cE

SS

ED

UN

DE

Rc

ab

INE

T L

IGH

TIN

G

3 0

EM-204PB MR 11-Black BaffleLED-EM-204PB Black Baffle

EM-204PBLED-EM-204PB

EM-203PB MR 11-White BaffleLED-EM-203PB White Baffle

EM-203WHLED-EM-203WH

EM-203SN MR 11-SN BaffleLED-EM-203SN SN Baffle

EM-203SNLED-EM-203SN

Description:

:: Built w/ deep baffle technology for glare-free illumination:: Relamps from the front:: Ideal for cabinets where crisp white halogen light is desired:: Includes housing to be used with remote transformer

:: All die-cast construction:: Ceiling opening is 2-5/16”:: 1W LED Warm White*

Max. Lamp Wattage 20w 12v MR11 Lamp

wh white ch chroMe


sn satin nickel

Finish:


EM-204CH

EM-204BK

EM-204CP

EM-204SN

EM-204PB

EM-204WH

UN

DE

Rc

ab

INE

T L

IGH

TIN

G f

LU

oR

ES

cE

NT



RE

cE

SS

ED

UN

DE

Rc

ab

INE

T L

IGH

TIN

G

3 2

EM-207WH MR 16-WH(White) BaffleLED-EM-207WH WH(White) Baffle

EM-207WHLED-EM-207WH

EM-206BK MR 16-BK(Black) BaffleLED-EM-206BK BK(Black) Baffle

EM-206BKLED-EM-206BK

EM-206SN MR 16-SN(Stain Nicklel) BaffleLED-EM-206SN SN(Stain Nicklel) Baffle

EM-206SNLED-EM-206SN

Description:

:: Built w/ deep baffle technology for glare-free illumination:: Relamps from the front:: Ideal for cabinets where crisp white halogen light is desired:: Includes housing to be used with remote transformer:: All die-cast construction:: Ceiling opening is 3-1/4”:: 3W LED Warm White*


wh white ch chroMe


sn satin nickel

Finish:



LED-EM-206SN

LED-EM-206WH

EM-203WH

LED EM-206CH

UN

DE

Rc

ab

INE

T L

IGH

TIN

G f

LU

oR

ES

cE

NT



RE

cE

SS

ED

UN

DE

Rc

ab

INE

T L

IGH

TIN

G

3 4

2-7/8”

EM-202SNMR-11 Gimbal (350 Tilt)

LED-EM-202SNMR-11 Gimbal (350 Tilt)

wh white ch chroMe


sn satin nickel

FINISH


Description:

:: Lamp holder provide adjustability:: Relamps from the front:: Ideal for cabinets where crisp white halogen light is desired:: Includes housing to be used with remote transformer:: All die-cast construction:: 1W LED Warm White*

EM-212CHMR-16 Recessed Reflector

LED-EM-212CHMR-16 Recessed Reflector

wh white ch chroMe


sn satin nickel

FINISH


Description:

:: Interior reflector provides optimum efficiency and glare control

:: Eliminates all shadows below the cabinet:: Ideal for cabinets where crisp white halogen light is desired:: Includes housing to be used with remote transformer:: All die-cast construction:: Ceiling opening is 3-1/4”:: 3W LED Warm White*




EM-202SN

EM-202PB EM-202CH EM-202WH EM-202BK

UN

DE

Rc

ab

INE

T L

IGH

TIN

G f

LU

oR

ES

cE

NT



RE

cE

SS

ED

UN

DE

Rc

ab

INE

T L

IGH

TIN

G

3 6

EM-225SBK

mR-11 mINI wITH GImbaL RING (350 TILT)

EM-228PB

mR-16 mINI wITH GImbaL RING (350 TILT)

Description:

:: Lamp holder provide 350 adjustability:: Relamps from the front:: Ideal for cabinets where crisp white halogen light is desired:: Includes housing to be used with remote transformer:: All die-cast construction:: Ceiling opening is 2-1/4”:: Outside diameter is 2-3/4”

spb satin Gold

sbk satin black

sch satin chroMe

Finish:

spb satin Gold

sbk satin black

sch satin chroMe

Finish:

sch-sbk satin chroMe rinG

with satin black baffle

EM-225CLCH

RE

cE

SS

ED

UN

DE

Rc

ab

INE

T L

IGH

TIN

G



3 7

EM-229PCHEM229SCH

EM-229MR-16 Mini with Gimbal Ring (350 Tilt)

Description:

:: Lamp holder provide 350 adjustability:: Relamps from the front:: Ideal for cabinets where crisp white halogen light is desired:: Includes housing to be used with remote transformer:: All die-cast construction:: Ceiling opening is 2-1/4”:: Outside diameter is 2-3/4”

spb white

sch-sbk satin chroMe rinG

with satin black baffle

sbk satin black

sch satin chroMe

Finish:

UN

DE

Rc

ab

INE

T L

IGH

TIN

G f

LU

oR

ES

cE

NT



RE

cE

SS

ED

UN

DE

Rc

ab

INE

T L

IGH

TIN

G

3 8

Description:

:: Lamp holder provide 350 adjustability:: Relamps from the front:: Ideal for cabinets where crisp white halogen light is desired:: Includes housing to be used with remote transformer:: All die-cast construction:: Ceiling opening is 3-1/4”:: 3W LED Warm White*


EM-208BKSurface/Recessed

*LED-EM-208BKSurface/Recessed

wh white ch chroMe


sn satin nickel

Finish:


RE

cE

SS

ED

UN

DE

Rc

ab

INE

T L

IGH

TIN

G



3 9

EM-208CH

EM-208PB

EM-208CH

EM-208WH

EM-208BK

L E D - D R I V E R S

TRANsfoRmERsE L E C T R O N I C

L E D - D R I V E R S

E L E C T R O N I C T R A N S F O R M E R

EL

Ec

TR

oN

Ic T

Ra

NS

fo

Rm

ER

LE

D - D

RIV

ER

ELEcTRoNIc TRaNSfoRmER LED - DRIVER


ELV-50DESCRIPTION: This quiet 50W-12V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

ELV-50PDESCRIPTION: This quiet 50W-12V plug-in electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.



1-3/4”

1-1/4”

1-5/8”

2-3/8”

1-1/8”

3/4”

2-3/8”

1-1/8”

3/4”

3”

3/4”

1-1/2”

input 120v 60hz output at Max. load 11.5v 40khz MaxiMuM load 50w MiniMuM load w/o diMMer 10w MiniMuM load with diMMer 20w input current at MaxiMuM load 0.4a output current at MaxiMuM load 4a power factor Min. 0.95 diMMable available colors: black white

specifications:


specifications:


specifications:


specifications:

EL

Ec

TR

oN

Ic T

Ra

NS

fo

Rm

ER

LE

D - D

RIV

ER



4 3

2”

1-1/3”

0/9”

input 120v 60hz output at Max. load 11.7v 40khz MaxiMuM load 75w MiniMuM load w/o diMMer 10w MiniMuM load with diMMer 20w output current at MaxiMuM load 6.35a power factor Min. 0.95 diMMable waterproof pottinG aluMinuM casinG

specifications: input 120v 60hz output at Max. load 23.2v 40khz MaxiMuM load 75w MiniMuM load w/o diMMer 10w MiniMuM load with diMMer 20w input current at MaxiMuM load 0.635a output current at MaxiMuM load 3.2a power factor Min. 0.95 diMMable rfi protection coMpatible with fcc liMits waterproof pottinG pc plastic casinG

specifications:



ELA-75DESCRIPTION: This quiet 75W-12V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

ELA-75-24DESCRIPTION:This quiet 75W-24V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.


specifications:


specifications:

3”

3/4”

1-1/2”3”

3/4”

1-1/2”

0/9”

1-1/3”

2-1/2”

LET-75 LET-75-24R

EL

Ec

TR

oN

Ic T

Ra

NS

fo

Rm

ER

LE

D - D

RIV

ER



specifications:

input 120v 50/60hz output at Max. load 11.5v 36khz MaxiMuM load 105w MiniMuM load 20w input current at MaxiMuM load 0.96a output current at MaxiMuM load 9.15a power factor Min. 0.95 diMMable waterproof pottinG

ELA-75-BfDESCRIPTION: This quiet 75w-12V bottom feed electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

ELA-75-277DESCRIPTION: This quiet 75W-12V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

LET-105-12V/120V RDESCRIPTION: This quiet 105W-12V/120V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

ELA-75-277-BfDESCRIPTION: This quiet 75w-12V bottom feed electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

63mm

33mm

20mm

input 277v 50/60hz output at Max. load 11.5v 40khz MaxiMuM load 75w MiniMuM load with diMMer 20w input current at MaxiMuM load 0.27a output current at MaxiMuM load 6.25a power factor Min. 0.95 diMMable waterproof pottinG pc plastic casinG ul94vo rfi protection coMpatible with fcc liMits

specifications:

input 120v 60hz output at Max. load 11.7v 40khz MaxiMuM load 75w MiniMuM load w/o diMMer 10w MiniMuM load with diMMer 20w output current at MaxiMuM load 6.35a power factor Min. 0.95 diMMable waterproof pottinG aluMinuM casinG

specifications:

input 277v 50/60hz output at Max. load 11.5v 40khz MaxiMuM load 75w MiniMuM load with diMMer 20w input current at MaxiMuM load 0.27a output current at MaxiMuM load 6.25a power factor Min. 0.95 diMMable waterproof pottinG pc plastic casinG ul94vo rfi protection coMpatible with fcc liMits

specifications:

3-1/8”

1-1/2”

1”

LET-75-Bf

LET-75-12-277

LET-105-12V/120VR

LET-75-12-277-Bf

2-1/3”

1-1/4”

0/9”

3-1/4”

1-1/4”

1-1/3”

EL

Ec

TR

oN

Ic T

Ra

NS

fo

Rm

ER

LE

D - D

RIV

ER



4 5

3-3/8”

1-3/8”

1-1/16”

input 120v 60hz output at Max. load 23.4v 30khz MaxiMuM load 150w MiniMuM load 50w input current at MaxiMuM load 1.25a output current at MaxiMuM load 6.3a power factor Min. 0.985 MaxiMuM harMonic distortion 9% diMMable aluMinuM casinG waterproof pottinG

specifications:

3-3/8”

1-3/8”

1-1/16”

input 120v 60hz output at Max. load 23.5v 30khz MaxiMuM load 150w MiniMuM load 50w input current at MaxiMuM load 1.25a output current at MaxiMuM load 12.56a power factor Min. 0.985 MaxiMuM harMonic distortion 14.8% diMMable aluMinuM casinG waterproof pottinG

specifications:



ELV-150-ACDESCRIPTION: This quiet 150W-12V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

ELV-150-24-ACDESCRIPTION: This quiet 150W-24V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

3-3/4”

1-1/2”

1-1/4”

input 120v 60hz output at Max. load 11.5v 40khz MaxiMuM load 105w MiniMuM load 10w input current at MaxiMuM load 1.25a output current at MaxiMuM load 8.75a power factor Min. 0.985 diMMable aluMinuM casinG waterproofinG pottinG

specifications:

input 120v 60hz output at Max. load 11.5v 40khz MaxiMuM load 150w MiniMuM load 10w input current at MaxiMuM load 1.25a output current at MaxiMuM load 12.56a power factor 0.985 MaxiMuM harMonic distortion 14.8% diMMable aluMinuM casinG

specifications:

3-3/4”

1-1/2”

1-1/4”

LET-151-12 LET-151-24

EL

Ec

TR

oN

Ic T

Ra

NS

fo

Rm

ER

LE

D - D

RIV

ER



input 120v 60hz output at 50w/24v 11.8v 30khz load 50-150w output current at 150w/24v 12.56a power factor Min. 0.985 MaxiMuM harMonic distortion 24v 14.8% diMMable aluMinuM inner casinG steel outer casinG waterproof pottinG ul94vo

specifications:

5-3/16”

1-1/2”

1-1/16”

input 120v 60hz output at Max. load 11.7v 30khz MaxiMuM load 300w MiniMuM load 50w input current at MaxiMuM load 2.5a output current at MaxiMuM load 25.5a power factor Min. 0.985 MaxiMuM harMonic distortion 9% diMMable waterproof pottinG ul94vo aluMinuM casinG

specifications:

input 120v 60hz output at Max. load 23.5v 30khz MaxiMuM load 300w MiniMuM load 50w input current at MaxiMuM load 2.5a output current at MaxiMuM load 13.3a power factor Min. 0.985 MaxiMuM harMonic distortion 2.3% diMMable aluMinuM casinG waterproof pottinG ul94vo

specifications:

input 120v 60hz output at 50w/24v 23.4v 30khz load 50-150w output current at 150w/24v 6.3a power factor Min. 0.985 MaxiMuM harMonic distortion 24v 9% diMMable aluMinuM inner casinG steel outer casinG waterproof pottinG ul94vo

specifications:

ELA-150-ACDESCRIPTION: This quiet 150W-12V electronic step-down

transformer is designed to be used with low voltage lighting systems and is

protected against overload, short circuit and over heat and has a 2 year guarantee.

This transformer is offered with three 1/2” KO’s and is designed for branch circuit

and remote applications.

ELA-150-24-ACDESCRIPTION: This quiet 150W-24V electronic step-down

transformer is designed to be used with low voltage lighting systems and

is protected against overload, short circuit and over heat and has a 2 year

guarantee. This transformer is offered with three 1/2” KO’s and is designed

for branch circuit and remote applications.

ELV-300-ACDESCRIPTION: This quiet 300W-12V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

ELV-300-24-ACDESCRIPTION: This quiet 300W-24V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

6-1/2”

1-1/2”

1-3/8” 6-1/2”

1-1/2”

1-3/8”

5-3/16”

1-1/2”

1-1/16”

LVT-151-AC LVT-151-24-AC

LET-300-12-AC LET-303-24-AC

EL

Ec

TR

oN

Ic T

Ra

NS

fo

Rm

ER

LE

D - D

RIV

ER



4 7

specifications: input 120v 50/60hz output at Max. load 11.7v 40khz load 120-360w input current at 360w 3.2a output current at 360w 5a x 6 power factor Min. 0.95 MaxiMuM harMonic distortion 13% diMMable aluMinuM inner casinG steel outer casinG

1-3/8”

3-11/16”

inside diameter3/8”

9-3/8”

1-5/8”

1-7/16”

specifications:

input 120v 60hz output at Max. load 11.75v 30khz MaxiMuM load 300w MiniMuM load 50w input current at MaxiMuM load 2.5a output current at MaxiMuM load 24.4a power factor Min. 0.992 MaxiMuM harMonic distortion 11% diMMable waterproof pottinG ul94vo aluMinuM casinG

ELA-300DESCRIPTION: This quiet 300W-12V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee. This transformer is offered with three 1/2” KO’s and is designed for branch circuit and remote applications.

ELA-300-24DESCRIPTION: This quiet 300W-24V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee. This transformer is offered with three 1/2” KO’s and is designed for branch circuit and remote applications.

ELA-300-jCDESCRIPTION:This quiet 300W-12V electronic step-down

transformer is designed to be used with low voltage lighting systems and

is protected against overload, short circuit and over heat and has a 2 year

guarantee. This transformer is offered with six 1/2” KO’s and is designed for

branch circuit and remote applications.

LET-301-12-ACDESCRIPTION: This quiet 300W-12V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

specifications: load 50-300w inputt 120v 60hz output at 300w/12v 11.7v 30khz input current at 300w 2.5a output current at 300w 25.5a power factor Min. 0.985 MaxiMuM harMonic distortion 12v 9% diMMable aluMinuM inner casinG steel outer casinG waterproof pottinG ul94vo

9-3/8”

1-5/8”

1-7/16”

specifications: load 50-300w input 120v 60hz output at 300w/24v 23.5v 30khz input current at 300w 2.5a output current at 300w 13.3a power factor Min. 0.985 MaxiMuM harMonic distortion 24v 2.3% diMMable aluMinuM inner casinG steel outer casinG waterproof pottinG ul94vo

1-3/4”

4-3/4”

8-1/4”

LVT-303-12 LVT-303-24

LRT-363-AC LET-301-12AC

EL

Ec

TR

oN

Ic T

Ra

NS

fo

Rm

ER

LE

D - D

RIV

ER



LVT-175DESCRIPTION: This quiet 300W-12V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

input 120v 60hz output at Max. load 11.8v dc MaxiMuM load 305w MiniMuM load 50w input current at MaxiMuM load 2.5a output current at MaxiMuM load 24.8a power factor 0.98 MaxiMuM harMonic distortion 3.5% diMMable aluMinuM casinG

specifications:

8-1/4”

1-1/2”

1-1/2”

EL

Ec

TR

oN

Ic T

Ra

NS

fo

Rm

ER

LE

D - D

RIV

ER



4 9

4-1/4”

1-1/2”

1-1/16”

input 120v 60hz output at Max. load 11.55v 120khz MaxiMuM load 150w MiniMuM load 50w input current at MaxiMuM load 1.25a output current at MaxiMuM load 12.56a power factor Min. 0.985 MaxiMuM harMonic distortion 14.8% diMMable aluMinuM casinG waterproof pottinG

specifications:

4-1/4”

1-1/2”

1-1/16”

input 120v 60hz output at Max. load 11.7v 29khz MaxiMuM load 200w MiniMuM load 50w input current at MaxiMuM load 1.7a output current at MaxiMuM load 17a power factor Min. 0.98 MaxiMuM harMonic distortion 10% diMMable aluMinuM casinG waterproof pottinG

specifications:

LET-201DESCRIPTION: This quiet 200W-12V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

LVT-60DESCRIPTION: This quiet 150W-12V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

LET-60DESCRIPTION: This quiet 60W-12V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

LET-175-DCDESCRIPTION: This quiet 300W-12V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, short circuit and over heat and has a 2 year guarantee.

input 120v 60hz output at Max. load 11.5v 40khz MaxiMuM load 60w MiniMuM load 20w input current at MaxiMuM load 0.5a output current at MaxiMuM load 5a power factor 0.95 MaxiMuM harMonic distortion 14.8% diMMable aluMinuM casinG

specifications:

3-3/4”2”

1-1/4”0.9”

input 120v 60hz output at Max. load 11.8v dc MaxiMuM load 300w MiniMuM load 50w input current at MaxiMuM load 2.5a output current at MaxiMuM load 24.8a power factor 0.98 MaxiMuM harMonic distortion 3.5% diMMable aluMinuM casinG

specifications:

8-1/4”

1-1/2”

1-1/2”

EL

Ec

TR

oN

Ic T

Ra

NS

fo

Rm

ER

LE

D - D

RIV

ER



80 WATT METAL SERIESDESCRIPTION: This quiet 10-80W - 120/277V low-voltage

transformers utilize a soft start circuitry to maximize lamp life. The soft start circuit

ramps up the lamp filament voltage slowly when the lamp is cold.

Note: Instant Start on Hot Lamp Re-Strike

108 WATT RS SERIESDESCRIPTION: This quiet 20-108W - 120/277V low-voltage

transformers utilize a soft start circuitry to maximize lamp life. The soft start

circuit ramps up the lamp filament voltage slowly when the lamp is cold.










RS12-108

3.03”

1.30”

.81”RS12-108RS24-108RS12-108-277

3.03”

1.30”

.80”RS12-108BfRS12-108-

RS12-80

2.20”

1.23”

.75”

RS12-80

2.72”

1.30”

.80”

RS12-80Bf

3.03”

1.30”

.81”

RS12-80-277Bf

specifications:

hatch iteM no. Max watts Min watts input volts input aMps output volts output aMps rs12-108 108 20 120 0.90 11.5 9.4 rs12-108bf 108 20 120 0.90 11.5 9.4 rs24-108 108 20 120 0.90 23.5 4.6rs12-108-277 108 20 277 0.39 11.5 9.4 rs12-108-277bf 108 20 277 0.39 11.5 9.4

specifications:

hatch iteM no. Max watts Min watts input volts input aMps output volts output aMps rs12-80 80 10 120 0.67 11.5 7.0 rs12-80bf 80 10 120 0.67 11.5 7.0 rs12-80-277bf 80 10 277 0.29 11.5 3.4

3.31”

1.53”

1.03”

RS12-150Bf

3.31”

1.53”

1.03”

RS12-150-277Bf

RS12-150RS12-300

5.85”

1.70”

1.27”

RS12-300

6.41”

4.80”3.62”

1.61”

RS12-300Bf

5.85”1.70”

1.27”

RS12-300-277

specifications:

hatch iteM no. Max watts Min watts input volts input aMps output volts output aMps rs12-300 300 50 120 2.5 11.5 26.1 rs12-300bf 300 50 120 2.5 11.5 26.1 rs12-300-277 300 50 277 1.08 11.5 26.1

specifications:

hatch iteM no. Max watts Min watts input volts input aMps output volts output aMps rs12-150bf 150 35 120 1.25 11.5 13.05 rs12-150-277bf 150 35 277 0.55 11.5 13.05

EL

Ec

TR

oN

Ic T

Ra

NS

fo

Rm

ER

LE

D - D

RIV

ER



5 1

CAT#

ev24-150

ev24-200

odc-250s

odx-250s-24

ev24-300

odx-500

odx-600s

odc-750s

odx-750s-24

odx-1000

odx-1200s

Type

Magnetic

Magnetic

Magnetic

Magnetic

Magnetic

Magnetic

Magnetic

Magnetic

Magnetic

Magnetic

Magnetic

Output(12v)

1@150 watts

1@200 watts

1@250 watts

1@300 watts

2@250 watts

2@300 watts

3@250 watts

4@250 watts

4@300 watts

Output(24V)

1@150 watts

1@200 watts

1@250 watts

1@250 watts

1@300 watts

1@300 watts

1@500 watts

1@600 watts

2@375 watts

2@500 watts

2@600 watts

Depth

2-15/16”

2-15/16”

3-3/8”

3-3/8”

3-3/8”

4-1/4”

4-1/4”

4-1/4”

4-1/4”

5-7/16”

5-7/16”

Height

7-9/16”

7-9/16”

8-1/16”

8-1/16”

8-1/16”

9-7/16”

9-7/16”

9-7/16”

9-7/16”

10-9/16”

10-9/16”

Width

3-1/16”

3-1/16”

4-3/16”

4-3/16”

4-3/16”

4-11/16”

4-11/16”

4-11/16”

4-11/16”

6-3/4”

6-3/4”

Weight

10 lbs.

12 lbs.

16 lbs.

16 lbs.

16 lbs.

20 lbs.

20 lbs.

28 lbs.

28 lbs.

35 lbs.

35 lbs.

LET-250-12V-ACDESCRIPTION: This quiet 250W-120V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, shot circuit and over heat and has a 4 year guarantee.

ELV-250DESCRIPTION: This quiet 250W-120V electronic step-down transformer is designed to be used with low voltage lighting systems and is protected against overload, shot circuit and over heat and has a 4 year guarantee.

MAgNETIC TRANSfORMER

DESCRIPTION: Transformers are UL- and CUL-listed for use with lighting fixtures. These transformers are for use with 120/240 Vac/60 Hz input. The 24/12 volt secondary outputs are protected by inherent resetable breakers. The appropriate transformer can easily be determined by multiplying the number of lamps by the watts per lamp. for larger transformers (oDx-750S, oDc-750S, oDx-1000 and oDx-1200x), consideration should be given to the maximum capacity of each fused output. Capacities shown are conservative underestimates by approximately 10%.


specifications:


specifications:

8-1/2”

2”

1-1/2”

1-3/8”

4-1/2”

inside diameter3/8”

EL

Ec

TR

oN

Ic T

Ra

NS

fo

Rm

ER

LE

D - D

RIV

ER



CAT#

901001350u

901004350

901006350u

901006700

901010350

901010350pu

901010350lvd

901010350plub

901010350plus

901010350plutr

901010350pluw

901010700

901018350pu

901018700

901018700pu

901036700pu

Description

led 1w dc 350M converter


led 6w dc 350ma converter



led 10w dc 350M aluminum

led 10w dc 350ma lvt casing

led10w 350M plug in black

led 10w 350M plug in silver

led 10w dc 350ma plug in-clear

led 10w 350M plug in white


led 18w dc 350 potted


led 18w dc 700M aluminum

led 36w 700ma potted

Input

120-240v

120-240v

100-240v

100-240 v

95-265v

95-265v

95-265v

95-265v

95-265v

95-265v

95-265v

100-265v

100-265v

100-265v

110-265v

100-265v

Output

2-4v

2-14v

2-20v

2-10v

2-28v

2-28v

2-28v

2-28v

2-28v

2-28v

2-28v

2.3-15v

12-58v

10-24v

10-24v

12-58v

Dimension WxLxH

1.26x1.34x0.98

1.77x1.77x0.98

1.77x1.77x0.98

1.77x1.77x0.98

1.10x1.57x3.93

1.06x1.37x3.38

6.5x1.5x1.375

1.3x1.5x3.16

1.3x1.5x3.16

1.3x1.5x3.16

1.3x1.5x3.16

1.10x1.57x3.94

1.2x1.57x5.24

1.26x1.77x6.22

1.2x1.57x5.24

1.2x1.57x5.24

Potted

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

CAT#

901010012

901010012pu

901010024

901010024pu

901025012

901025012pu

901025024

901025024pu

901060012pu

901060024pu

901100012pu

901100024pu

Description

led 10w dc 12v converter

led 10w dc 12v aluminum











Input

95-265-v

95-265-v

95-265-v

95-265-v

90-277v

100-277v

90-277v

100-277v

100-277v

100-277v

100-277v

100-277v

Output

12v

12v

24v

24v

12v

12v

24v

24v

12-13.5v

24-26.4v

12v

24v

Dimension WxLxH

1.10x1.57x3.93

1.06x1.37x3.38

1.10x1.57x3.93

1.06x1.37x3.38

1.2x1.72x6.28

1.2x1.57x5.24

1.2x1.72x6.28

1.2x1.57x5.24

7.8x1.73x1.57

7.8x1.73x1.57

9.06x2.56x1.65

9.06x2.56x1.65

Potted

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

CAT#

led120a0024v10d

Description

120v/25w/24v/dim xitanium

Input

108-132v

Output

14.0-24.6

Dimension WxLxH

3.03x3.27x1.33

Potted

Dimming LED Drivers

Cunstant Voltage Drivers

Cunstant Current Drivers

SAfETy INSTRUCTIONS:

1. always disconnect power before installation and / or removal of

the unit.

2. Install in accordance with national and local electrical codes.

3. wires: Input and output wires 0.75mm or 18 awG.

Date post:	09-Apr-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

UNDER CABINET • TEL 1-877-375-5555 • fax 1-877-375-3333 2 Elite LED link Slim profile Great...

Documents