Operator Radar Activation Unit
Combined Motion andPresence Detection
Sensor
Access Control
Manual ActivationDevice
Program Selector
Presence DetectionSensor
Contacless ActivationDevice
Wireless PushButton
ADS FRAME DOOR
COH
Side Elevation Frame Door
145
50x50 M/S OR C-CHANNELSTRUCTURE SUPPORT
30
2410
5
147
PARTITION WALL
FIXED GLASS PANEL/ OTHERS
25
FFLFLOORGUIDE25x25x50 mm
20 258
12MM TEMPERED GLASS
SCREWSET
30
CONCRETE WALLSUPPORT 147
145
68
COH
230 VAC 50 HzPOWER SUPPLY SOCKETOULET, 13 A (By Others)
Side Elevation Frameless Door
ROLLER GUIDE15X15MM
48
TECHNICAL SPECIFICATION
BESAM Power Drive Technology
• Clear opening : 1 door leaf (Single slide) 900 - 2800 mm
: 2 door leaves (Bi-parting) 900 - 2800 mm
• Heavy duty operator with dimensions : 147 x 145 x 6000 mm
• Recommended max door weight : For Single slide 200 kgs*
: For Bi-parting 100 kgs/door leaf*
• Adjustable opening & closing force : 100 - 240 N
• Opening & closing speed: variable up to 1.4 m/s (Bi-parting)
• Hold open time: 0 - 60 sec
• Power supply: 100VAC -15% to 240VAC +10%; 50/60 Hz
• Power consumption at standby mode: 25W
• Power consumption: max. 250W
• Ambient temperature: -20oC to +50oC
• Relative humidity (non-condensing): 5% to 85%
• Control by microprocessor that has an integral self-monitoring device which detects any interference or faulty signals in door operation and takes necessary measures to ensure a safe operation.
• Fire alarm or smoke detector can interface with the system for emergency access from public entrances.
• Safety can be further enhanced by incorporating a Panic break-out fitting.
• Electro-mechanical locking device can be incorporated as a standard item.
• Optional electronic emergency unit that automatically opens or closes the doors in the event of power failure.
• Optional presence detection photocell for additional safety of 6M range.
• Activation unit - Motion or directional detection.
• Program selector with 5 positions: ‘OFF’
‘EXIT’ - ONE-WAY
‘AUTOMATIC’ - TWO-WAY
‘PARTIAL OPENING’
‘PERMANENT OPEN’
* For heavier door weight other than recommended, please refer to manufacturer for advice.
This brochure is for Illustration purpose only, actual specifications and requirements may vary.
Accessories
UniSlide
An ASSA ABLOY Group company, the global leader in door opening solutions ASSA ABLOY
Besam in briefWorld leading supplier of entrance solutions
Global presence – local mindsetGlobal service programmeCustomised applicationsDesign and functionality
A safe investment
Besam is a part of ASSA ABLOY.ASSA ABLOY is the world’s leading manufacturer and supplier of locking solutions,
meeting tough end-user demands for safety, security and user friendliness.
Besam (Manufacturing) Pte Ltd
Tel: +65 6745 6228 Fax: +65 6745 [email protected]
www.besam.com
ASSA ABLOY, the global leader in door opening solutions
DesignThe drive unit, control unit, transmission or optional emergency unit and electromechanical locking device are all assembled in the support beam. The drive unit transmits movement to the door leaves by means of a tooth belt. The door leaves with integrated or separately mounted door adaptors can be adjusted height-, length- and depth-wise. Journalled steel rollers and sliding track made of high-grade plastic give exceptionally smooth and silent operation.
High performanceMany of the most valuable features and innovations that characterize Besam’s strive for optimal function and performance are combined in the sliding door operator Besam UniSlide. The UniSlide can be integrated as part of Besam Automatic Door Systems but it can also be adapted to a wide range of different door and customer requirements.
Easy installationWith all units completely assembled in the support beam it is just as easy to install as a replacement as for new installations. Although it is very small and slim in appearance, it is entirely suitable for the heaviest duty applications. During the installation the operator is programmed to comply with the customer’s specific requirements.
No compromise on safetyTo permit safe passage between closing doors, the doors immediately reverse if an obstruction is detected, then resume their interrupted movement at low speed to check whether the obstruction has disappeared or not. If an obstruction is detected between opening doors and surrounding walls or interior fittings, the door immediately stops and then closes after a time delay.The safety can be further improved by using a Besam presence detection system. People or objects in the doorway are detected and the door is then prevented from closing until it is safe to do so.
Besam Sliding Door Operator UniSlide