24
Unit 12 Solids Presentation 1 3D Shapes Presentation 2 Making Solids Using Nets Presentation 3 Nets Presentation 4 Plans and Elevations of Buildings
| Date post: | 15-Jan-2016 |
| Category: |
Documents |
| Upload: | audra-ross |
| View: | 227 times |
| Download: | 5 times |
Unit 12Solids
Presentation 1 3D Shapes
Presentation 2 Making Solids Using Nets
Presentation 3 Nets
Presentation 4 Plans and Elevations of Buildings
Unit 12Solids3D Shapes
Cube
All side lengths equal (square faces), and all angles right angles
Cuboid
Faces are combination of rectangles (and possibly, squares); all angles right angles
Cylinder
Circular base
Sphere
All points on surface equidistant from centre
Pyramid
All slant edges are equal in length in a right pyramid
Prism
Cross section remains the same throughout
Tetrahedron
All four faces are triangular
Unit 12Solids
You have finished viewing:
3D Shapes
Return to front slide
Presentation 1 3D Shapes
Presentation 2 Making Solids Using Nets
Presentation 3 Nets
Presentation 4 Plans and Elevations of Buildings
Unit 12Solids
Making Solids Using Nets
Describe the solid that is made from each of these nets.
Prism
Describe the solid that is made from each of these nets.
Cube
Describe the solid that is made from each of these nets.
Pyramid
Unit 12Solids
You have finished viewing:
Making Solids Using Nets
Return to front slide
Presentation 1 3D Shapes
Presentation 2 Making Solids Using Nets
Presentation 3 Nets
Presentation 4 Plans and Elevations of Buildings
Unit 12Solids
Nets
Complete the following net of a cube
Now complete the net in a different way
Complete the cuboid net
Which one of these nets can be folded to make a cube?
Yes(but with overlap) No
Which one of these nets can be folded to make a cube?
YesNo
Unit 12Solids
You have finished viewing:
Nets
Return to front slide
Presentation 1 3D Shapes
Presentation 2 Making Solids Using Nets
Presentation 3 Nets
Presentation 4 Plans and Elevations of Buildings
Unit 12Solids
Plans and Elevations of Buildings
Complete the plan and
Elevations of this building
Scale: 1 square represents 1 m
PlanPlan
Complete the plan and
elevations of this building
Scale: 1 square represents 1 m
Side ElevationSide Elevation
Complete the plan and
elevations of this building
Scale: 1 square represents 1 m
Front ElevationFront Elevation
Unit 12Solids
You have finished viewing:
Plans and Elevations of Buildings
Return to front slide
Presentation 1 3D Shapes
Presentation 2 Making Solids Using Nets
Presentation 3 Nets
Presentation 4 Plans and Elevations of Buildings
