Date post: | 16-Dec-2015 |
Category: |
Documents |
Upload: | xzavier-priestley |
View: | 220 times |
Download: | 5 times |
Well, I’ve broken out of wrestling, and now have to get the the set of another Scorpion King movie. I’ve asked a buddy to help out
with the next section.
Well, lets take a look at what makes sedimentary
rock different from igneous rock. Lets start with
sediments.
Well, there are some nice sediments. There are three types of sediments:
-Clastic-Chemical-Organic
Chemical Sediments:-Mineral grains that formed due to a chemical process.
-Examples include acid rain, oxidation (rust), ocean salt wearing away the material.
Clastic Sediments: -Grains of rock and mineral
-These broke off of other rocks due to erosion or weathering.
-Can be a variety of sizes.Organic Sediments:
-Made from pieces of once living material.
-Examples: plant materials such as wood.
Sediments have a range of sizes, from largest to smallest:-Pebbles,-Gravels,
-Sand,-Silt,
-Clay.
However, there are different sizes of sediments. I should probably explain
that part!
The key to learning how clastic rocks form is by looking at what makes them. These rocks are formed by sediments that are
cemented together by time and pressure.
We sort the sediments by size using a sieve.
-Sediments are placed into the top sieve,
-The lower sieves have progressively smaller
screens to screen out the sediments.
-Once the system is turned on, the sieve vibrates.
-After several minutes, we can see the different
sediments, sorted by size.
Nature also sorts sediments. -In rivers, fast moving waters carry all
sediments.-As the rivers slow down, or approachthe edge of the riverbed, sediments
are dropped off.-The largest and heaviest (pebbles)
get dropped off first.-The smallest (clay) stay in the river
the longest.
-Dissolved minerals in the ocean or river water act as cement that holds the sediments together. -Silica, lime, and iron can act as
cement.-The cement works its way into the
pores and irregularities in the sediments.
-The cement binds to the rock sediments and holds them
together.
-Clays and silts can bind together when pressure is high enough, but heavier materials need cement to hold them together.
-Pebbles and gravels form a conglomerate.-Sand forms sandstone.
-Silt and clay forms shale.
-Conglomerate is the coarsest of the clastic sedimentary rocks.-The pebbles and gravels that make up the conglomerate are easily visible to the naked eye.
-Conglomerates can be made out of any type of pebble or gravel.-Quartz is very commonly found in conglomerates because of its
durability.-The cement that holds the pebbles and gravels together is usually
very fine grained.
-Sandstone is made of sand sized sediments.
-Generally, all the sand sediments are quartz grains.
-Cement holds the sand grains together.
-Because the cement never fills all the spaces between the sand grains, there can be up to 30% of air space between the grains.
-Sandstone is rough, gritty and durable.-In some areas of the world, sandstone was commonly used as a
building material and as a sculpting material.
-Shale is made of clay and silts.
-Clay is composed mostly of kaolin, so shale is mostly
kaolin.-The grains in shale are very
tightly packed together.
-Shale is a very soft and smooth stone.-It breaks very easily.
-Fossils are found in shales, since they form in rivers.
Some sedimentary rocks form through chemical processes.
-When minerals are dissolved in water, they can react with other
minerals or other chemicals.-This produces a new material.
-The most common chemical sedimentary rocks are:
-Limestone-Rock salt
-Rock gypsum
-Limestone forms from tiny grains of of calcite.-Calcium can also come from shells or bones.
-The tiny grains of calcite are usually deposited from sea or lake water.
-Limestones are usually light gray or white in color.
-Due to the heavy nature of the atoms that make the minerals,
limestone is very dense.-Limestone will feel smooth to
the touch.
-Rock salt is the natural form of table salt.
-Rock salt is made almost entirely out of halite.
-Rock gypsum is very much like rock salt, but made out of
gypsum.-Both form through the
evaporation of salt lakes or ocean bays cut off by
sandbars.
Now, there is one last type of sedimentary rock we should look at, and that is sedimentary rocks that form through organic means.
-Limestone can also form through organic means.
-Shells of sea creatures, plankton, bones, etc. pile up on the ocean
floor.-As time progresses, these calcium deposits compact into limestone.-On land, a common sedimentary
rock is formed from plant remains: coal.
-Sedimentary rocks show special features that help to
identify them.-One method we use is
stratification.-Stratification is the
arrangement in visible layers.-How does stratification
develop?
-When a change of sediments occurs, a new layer develops.-Different size grains, or new sediments appear, a new layer of
sedimentary rock forms.-This is how sedimentary rocks become stratified.
-Aha! New sediments result in new layers.
-That’s why we see sandstone on top of shale, on top of
sandstone.-Now, there are a couple other
features we can look at: bedding planes and cross
bedding.
-Bedding plane: horizontal layers where stratification
begins.
-Cross bedding: A angled section or layer in stratification.-It can be due to wind, erosion,
or tectonic forces.
-Many sandstones show ripple marks on the surface of the bedding plane.
-These formed by the winds and water that formed and deposited the sediments.
-Mud cracks develop when deposits of wet clay dry out and contract.
-In a bedding plane, these cracks are filled with other materials.
-Limestones can sometimes contain hollow spheres of
silica.-These hollow spheres
contain crystals.-This is a geode.
-It appears that geodes formed by water wearing
away a hallow in the stone.-Over time, this hallow gets quartz deposited in it, which
grows into crystals.-Also in limestones, there
can be lumps of chert or flint.