Technical data sheet UNITED CC
INTERKAL SPECTATOR SEATING WORLD WIDE | 5981 East Cork, Kalamazoo, MI 49048 | 269.349.1521 | interkal.com
Top Row: Fully upholstered models on Telescopic Platforms.Bottom row: Tread fixed chairs in a lecture theatre setting; fixed back model.Below: Rear of seat with optional plastic protection panel (fixed back model).Description
Offering all the styling and comfort of an auditorium chair combined with complete flexibility, the United CC is suitable for both fixed seating and telescopic installations. The pocket sprung seatpan provides a luxurious feel to the chair and its unique rising action creates wide, safe walkways.
Features Self rising design, with auto rise armrest and the backrest acting as a
counterweight Compact dimensions when closed High backrest for concert-level comfort Optional protective plastic panel to the back Pocket sprung seat core for outstanding support Elegant curved timber armrests
©Interkal, Kalamazoo, MI Printed in U.S.A.
Spectator Seating World Wide www.interkal.com
Interkal
5981 East Cork P.O. Box 2107Kalamazoo, MI 49048 Kalamazoo, MI 49003-2107Phone: 269.349.1521 Fax: 269.349.6530interkal.com Email: [email protected]
UNITED CC Technical data sheet
W W 1¹⁄₈” 25³⁄₄”
24³⁄₄”
17⁷⁄₈”
36¹⁄₄”
32⁷⁄₈”
18¹⁄₄” 6¹⁄₂”
Seat widths18½”, 18⅞”, 19¼”, 19⅞”, 20⅞”, 20½”, 20⅞”, 21¼”, 21⅞” (without plastic panel to back) 18⅞”, 19⅞”, 20½” (with plastic panel to back)
Fixing methodsBeam mounted (tread or riser fixed), fold-down (for Telescopic Platforms) or matrix (for flat floor configurations).
FinishesMetal parts Epoxy powder coat, gray
Seat and back Upholstered in fabric to customer choice and availability.
Plastic back cover in gray.
SpecificationSeat Plywood core with pocket coiled springs, with polyurethane CH foam wrap,
fully upholstered
Backrest Composite CMHR/CME foam, 1¾” - 2½” thick on ½” thick preformed plywood,
upholstered. Optional protection panel to the rear is injection molded gray polypropylene.
Chair frame Die cast one piece aluminum arm stanchion incorporating seat pivot assembly
clamped to 2” x 2” x ⅞” steel tube cross beam.
Armrest Standard curved timber with clear lacquer (options - timber block, black ABS or
upholstered).
Seat rise up mechanism Gravity fold operations.
Tube end plugs Injection molded low density polyethylene.
Options, variations and accessoriesAccessories⅞• Timber outer back
⅞• Protective plastic outer back
⅞• Seat numbers
⅞• Row letters
⅞• Cupholder
Variations⅞• Upright backrest geometry can be specified for correct posture in upper tiers.
⅞• A fixed back version suitable for arena environments is available, where the back does not move as the seat is tipped up.
Drawing shows beam mounted (tread fixed) chairs with no plastic protection panel to the back. Height measurements are taken at chair center. All dimensions are nominal.