Furnish Rolling Steel Gates Series 150 as manufactured by "USP" complete with curtain, hood, guides, counterbalance and options as specified. OPERATION • manual lift • internal central motors G RILLE construction shall be brick pattern or straight pattern. Continuous horizontal solid rods 2 1/4" o.c. are to be covered with tubular spacers. Spacer to be vinyl. Links to be aluminum. Rods to be bright basic or galvanized wire. Bottom of grille shall be fitted with a bottom bar. Available spacer colors: Bronze, Silver, Black and Gold. BOTTOM BAR shall consist of an interlocking slat carriage bolted to a 2" x 2" x 1/8" hot rolled angle. Lifting handle is centered. S PRING COUNTERBALANCE is computer designed. Using USP Helical Power Pack springs. Housings rotate around a fixed pipe shaft using steel cup bearings. GUIDES to be rolled formed from 11 gauge steel into a 2 1/2" deep channel with 3/8" returns. Guide is field welded to mounting angle, minimum 2" x 2" x 1/8" hot rolled. H OODS shall consist of #24 U.S. gauge steel. Hoods are designed to protect and house counterbalance assembly. END BRACKET PLATES shall be of sufficient gauge to minimize deflection. Each plate has welded angle pipe support to accept spring shaft assembly. L OCKING using "HASPS & PINS" a galvanized steel pin padlocked to a steel hasp welded to the track. For other locking mechanisms see "LOCKS". FINISH all exposed non-galvanized surfaces shall receive a shop coat of rust inhibiting primer. Field painting not included in this section. I NSTALLATION to be by USP or by an authorized dealer. • Sloping bottom bar • Kick plate using 4SC slats • Bolted assembly • Slat locks • Security panel • Panic release (motorized) • Remote control (motorized) SPECIFICATIONS OPTIONS R R OLLING OLLING S S TEEL TEEL G G RILLE RILLE 150 S 150 S ERIES ERIES UNITED STEEL PRODUCTS •Economically priced •Band spring counterbalance •Solid 5/16" steel grille rods •Long life PVC sleeves •Steel angle bottom bar •Roll formed guides •Galvanized steel hood •Easily serviced •Superior Grille Strength HIGHLITES
Transcript
Furnish Rol l ing S tee l Gates Ser ies 150 asmanufactured by "USP" complete with curtain,hood, guides, counterbalance and opt ions asspecified.
OPERATION• manual lift• internal central motors
GRILLE construct ion shal l be br ick pattern orstraight pattern. Continuous horizontal solid rods2 1 /4 " o . c . a re t o be cove red w i t h t ubu la rspace rs . Space r t o be v i ny l . L i nks t o bealuminum. Rods to be bright basic or galvanizedwire. Bottom of grille shall be fitted with a bottombar.Avai lable spacer colors: Bronze, Si lver, Blackand Gold.
BOTTOM BAR shall consist of an interlocking slatcarr iage bol ted to a 2" x 2" x 1 /8" hot ro l ledangle. Lifting handle is centered.
SPRING COUNTERBALANCE is computer designed.Using USP Helical Power Pack springs. Housingsrotate around a fixed pipe shaft using steel cupbearings.
GUIDES to be rolled formed from 11 gauge steelin to a 2 1/2" deep channel wi th 3/8" returns.Guide is field welded to mounting angle, minimum2" x 2" x 1/8" hot rolled.
HOODS shal l consist of #24 U.S. gauge steel .Hoods a re des i gned t o p ro tec t and housecounterbalance assembly.
END BRACKET PLATES shall be of sufficient gaugeto minimize deflection. Each plate has weldedang le p i pe suppo r t t o accep t sp r i ng sha f tassembly.
LOCKING using "HASPS & PINS" a galvanizedsteel pin padlocked to a steel hasp welded to thet r ack . Fo r o t he r l o ck i ng mechan i sms see"LOCKS".
FINISH all exposed non-galvanized surfaces shallreceive a shop coat of rust inhibiting primer. Fieldpainting not included in this section.
INSTALLATION to be by USP or by an authorizeddealer.
For fastening to masonry using expansion bolts orthrough the wall threaded rods (if required.)
For fastening tosteel using machinebolts or welding
Face of wall
Face of wall
United Steel Products, Inc.33-40 127th Place
Flushing, New York 11368(718) 478-5330
http://www.unitedsteelproducts.com
H - HEIGHT Gto 9'6" 15
9'6" to 11'6" 1511'6" to 13'6" 16
C L E A R A N C E SC E N T R A L O P E R A T O R S
E-MOUNT BETWEEN THE JAMBSZ-MOUNT
face ofwall
widthA B
G+1
H
G
2"
1"
open
ing
Models:�SC4/SF4-10EGB/EGS-10
betweenjambs
widthA B
G+1
H
G
2"
open
ing
Models:�SC4/SF4-15EGB/EGS-15
reverse
widthA B
G+1
H
G
2"
open
ing
Models:SC4/SF4-18EGB/EGS-18
Models:EGB/EGS -10EGB/EGS-40(motor)
Models:EGB/EGS-15EGB/EGS-45(motor)
Models:EGB/EGS-18EGB/EGS-48(motor)
WIDTH A Bto 12'6" 2-1/2" 2-1/2"
Used in new installations or renovations, central motors are speciallydesigned to operate rolling shutters, rolling doors and rolling grilles usingspring box counter-balancing systems.
Specifications:• Requires no additional side
clearance• 115v - 60 single phase• Thermally protected against
overheating.• Maximum continuous running time:
5 minutes• Max 20 up and down operations
per day• Limit switch capacity of 11
revolutions• U.L. recognized
Note:When computing total load on the operator a 35% safety factor is takenagainst its maximum lifting capacity.
2 Models Available:202 Operator with a continuous brake system with a clutch override for
emergency situations.
302 Operator without a brake system. Gate must be padlocked closed.Emergency operation at all times.
Options:Control/Remote Board:Model RC100 allows remote operation of the door and addsconnections for safety devices.
Panic Release Lever:Model LD-02515 allows quickrelease of model 202 brake systemin the event of an emergency.
EGB 6" spaced brick pattern
BRV Bronze vinylSLV Grey vinylBKV Black vinylGLV Gold vinyl
GRILLE TYPE 150 SERIES
GRIILLE SLEEVE FINISH 150 SERIES
TRIM FINISH OPTIONS
HOODBRONZEBLACKGREY
GUIDESBRONZEBLACKGREY
BOTTOMBAR
BRONZEBLACKGREY
Where clearances are critical, dimensions may bereduced. Refer inquiries to our Engineering Department.
