1

2

FEATURES:• It is with Taiwan 3HP Belt type milling head with high speed and spindle

can automatic feed• The machine head can swivel 45°• X, Y axis automatic feed, Z axis with motorized lifting and lowering of table• Guideway type: dovetail guideway on Z and Y axis• Its advantages include: ram can not only move forward and backward,

also swivel 180°

STANDARD ACCESSORIES:• Drill chuck • Spindle arbor • Wedge shifter• Reduction sleeve• Draw bar• Wrench• Inner hexagon spanner• Machine vise • 1 Set milling collet • Milling arbor• Crank handle

OPTIONAL ACCESSORIES:• Horizontal / vertical rotary table• Universal dividing head• Digital read out• Air draw bar• Clamping kit set• Slotting head

UNIVERSAL MILLING MACHINE X6328B

DESCRIPTION X6328BTable size 1120 x 260 mmT slot   3 / 14 / 63 noMax. load of table 200 Kg

MACHINING RANGETable longitudinal travel ( manual / auto ) 600 / 575 mmTable cross travel  ( manual / auto ) 270 / 245 mmTable vertical travel ( manual / auto ) 300 mm

MAIN SPINDLESpindle taper ( V / H ) ISO40Spindle speed / step - Vertical 65-4500 / 8steps rpmSpindle speed / step - Horizontal 40-1300 / 12steps rpmMax. drilling diameter 30 mmMax. end milling width 100 mmMax. vertical milling diameter 25 mmMax. tapping diameter M16 mmQuill travel 127 mmSwivel angle of headstock ± 45ºVertical spindle axis to column surface 100 - 650 mmVertical spindle nose to table surface 100 - 400 mmHorizontal spindle axis to table surface 0 - 300 mmHorizontal spindle axis to arm bottom 175 mmArm travel 500 mm

FEEDSLongitudinal / cross feed 24 - 402 / 9 steps mm/minVertical / step 422 / 1 step mm/minLongitudinal / cross rapid speed 402 mm/minRapid traverse vertical 422 mm/minAutomatic spindle feed 0.45 / 0.86 / 1.25

POWERMain motor 2.2 (V / H) kW( X / Y / Z ) feed motor 0.37 ( X / Y ), 0.75 ( Z ) kWCoolant motor 0.04 kW

OTHERSOverall dimension 1710 x 1480 x 2100 mmN / W, G / W 1350 / 1500 Kg

3

DESCRIPTION X6332ZTable size 1320 x 320 mmT slot   5 / 14 / 63 noMax. load of table 300 Kg

MACHINING RANGETable longitudinal travel ( manual / auto ) 800 / 750 mmTable cross travel  ( manual / auto ) 300 / 280 mmTable vertical travel ( manual / auto ) 400 mm

MAIN SPINDLESpindle taper ( V / H ) ISO40Spindle speed / step - Vertical 90 - 2000 / 8 steps rpmSpindle speed / step - Horizontal 40 - 1300 / 12 steps rpmMax. drilling diameter 30 mmMax. end milling width 125mmMax. vertical milling diameter 25 mmMax. tapping diameter 10 mm (steel)Quill travel 120 mmSwivel angle of headstock ± 45ºVertical spindle axis to column surface 200 - 780 mmVertical spindle nose to table surface 180 - 580 mmHorizontal spindle axis to table surface 0 - 400 mmHorizontal spindle axis to arm bottom 175 mmArm travel 400 mm

FEEDSLongitudinal / cross feed 20 - 360 / 8 steps mm/minVertical / step 422 / 1 step mm/minLongitudinal / cross rapid speed 1200 mm/minRapid traverse vertical 422 mm/minAutomatic spindle feed 0.08 / 0.15 / 0.25

POWERMain motor 2.2 kW( X / Y / Z ) feed motor 0.55 ( X / Y ), 0.75 ( Z ) kWCoolant motor 0.09 kW

OTHERSOverall dimension 1710 x 1720 x 2330 mmN / W, G / W 2000 / 2200 Kg

FEATURES:• The machine is with gear driven milling head and the

spindle can be automatic feed• Rectangular table guide ways with high stability• Automatic feeds on X, Y axes. Motorized lifting and

lowering of table on Z axis• Hardened and ground table surface• Headstock swivels ± 45°

STANDARD ACCESSORIES:• Drill chuck • Spindle arbor • Wedge shifter• Reduction sleeve• Draw bar• Wrench• Inner hexagon spanner• Machine Vise• 1 Set milling collet • Milling arbor• Crank handle

OPTIONAL ACCESSORIES:• Digital read out• Air draw bar• Slotting head• Clamping kit set• Universal dividing head• Horizontal / vertical rotary table

UNIVERSAL MILLING MACHINE X6332Z

4

VERTICAL MILLING MACHINE X6325

DESCRIPTION X6325Table size 254 × 1270 mmTable loading 280 KgLongitudinal travel 950 (850 mm)Cross travel 400 mmVertical travel 400 mmT-slot No. and size 3 × 16Ram travel 470 mmDistance from spindle nose to table surface 0 - 405 mmSpindle taper ISO30 ( Opt. ISO 40 )Spindle travel 127 mmSpindle speed 66 - 4540 rpm

Guide way X Dove Tail Y Square guide Z Square guide

Auto. quill feed (Three steps) : 0.04 / 0.08 / 0.15Spindle motor 2.2 KW / 3HPHead swivel 90°Head tilting 45°Overall Dimension    1516 × 1550 × 2080 mmG.W 1200 Kg

FEATURES:• It is with Taiwan 3HP Belt type milling head with high speed and manual

feed spindle• X axis power feed

STANDARD ACCESSORIES:• Milling collet chuck set• Clamping kits set• Dro 2 axes for X and Y axes• Power feed device for X axis• Coolant pump and hose• Oil collection tray• Machine vise• Tools and tool box • Machine lamp OPTIONAL ACCESSORIES:• Air draw bar• Universal dividing head• Horizontal / vertical rotary table• Clamping kit set• Z axis lifting motor• Slotting head

5

STANDARD ACCESSORIES:• Enclosed Guard• Swiveling control box• Low energy work light• LED 3 color warning light• Volumetric type automatic lubricator• Auto power off• Rigid tapping• Tool box• Leveling screw & blocks• Operation manual• Mechanical oil coolant separator• Air gun

OPTIONAL ACCESSORIES:• Tool changer 16/20/24• Spindle upgrade belt type 12000 rpm• Spindle upgrade built-in 18000/24000 rpm• Screw type chip conveyor• Chip wash system• Tool measuring system• Tool breakage system• Liner scale• Coolant through spindle• Spindle oil cooler

DESCRIPTION TE-655 TE-855 TE-1060Table Size 800 x 550 mm 1000 x 550 mm 1100 x 600 mmT-slot 100 x 18 x 5 mmMax. Loading Weight 600 Kg 800 Kg 1000 KgX/Y/Z-Axis Travel 650 / 550 / 550 mm 850 / 550 / 550 mm 1020 / 600 / 600 mmSpindle Nose to Table Surface 150 - 700 mm 150 - 700 mm 150 - 750 mmX/Y/Z-Guideway Type Linear GuidewaySpindle Taper BT40Spindle Speed 10.000 rpmSpindle Motor-Fanuc / Mitsubishi / Siemens 11 / 7.5 / 7 kW 11 / 7.5 / 7 kW 15 / 11 / 9 kWCutting Feedrate 10 m/minRapid Traverse (X / Y / Z-Axis) 36 / 36 / 36 m/minMachine Weight 4000 Kg 4300 Kg 6000 KgController Fanuc, Mitsubishi, Siemens

VERTICAL MACHINING CENTERBy:

6

OTHER MILLING MACHINE – BED TYPE

Bed Type Universal Milling Machine - X715• Table size: 2100 x 500 mm• Table travel (X, Y, Z): 1500 x 670 x 670• Spindle speed: 35 - 1345 rpm• Spindle taper: ISO50• Spindle motor power: 7.5 kW

Bed Type Universal Milling Machine - X716• Table size: 2500 x 600 mm• Table travel (X , Y, Z): 1500 x 650 x 700• Spindle speed: 50 - 1624 rpm• Spindle taper: ISO50• Spindle motor power: 11 kW

Bed Type Vertical Milling Machine - XA7140• Table Size: 1400 x 400 mm• Table travel (X, Y, Z): 800 x 400 x 500• Spindle speed: 18 - 1800 rpm• Spindle taper: ISO50• Spindle motor power: 7.5 kW

Bed Type Vertical Milling Machine - X713• Table Size: 1525 x 320 mm• Table travel (X, Y, Z): 1050 x 470 x 520• Spindle speed: 70 – 3620 RPM• Spindle taper: ISO40• Spindle motor power: 3.75 kW

7

OTHER MILLING MACHINE – KNEE TYPE

Knee Type Vertical Milling Machine - X5032• Table size: 1320 x 320 mm• Table travel (X, Y, Z): 680 x 240 x 330• Spindle speed: 30 - 1500 rpm• Spindle taper: ISO 50• Spindle motor power: 7.5 kW

Knee Type Vertical Milling Machine - XW6136• Table size: 1320 x 360 mm• Table travel (X, Y, Z): 1000 x 300 x 400• Spindle speed: 58 - 1800 RPM• Spindle taper: ISO50• Spindle motor power: 4 kW

Knee Type Vertical Milling Machine - XZ6326• Table size: 1270 x 320• Table travel (X, Y, Z): 730 x 290 x 380• Spindle speed: 30 - 1500 rpm• Spindle taper: ISO40• Spindle motor power: 2.2 kW

Knee Type Vertical Milling Machine - X6132• Table size: 1320 x 320 mm• Table travel (X, Y, Z): 680 x 244 x 300• Spindle speed: 30 - 1500 rpm• Spindle taper: ISO50• Spindle motor power: 7.5 kW

8

UNIVERSAL MILLING MACHINE

DESCRIPTION 2T 2VH 2HT 2VHTTable size 1300 x 300 mm 1300 x 300 mm 1300 x 300 mm 1300 x 300 mmX / Y / Z axis travel 1000 / 360 / 450 mm 1000 / 360 / 450 mm 1000 / 360 / 450 mm 1000 / 360 / 450 mmT slot 16 x 3 x 63 16 x 3 x 63 16 x 3 x 63 16 x 3 x 63X, Y axes feedrate 2500 mm/min 2500 mm/min 2500 mm/min 2500 mm/min(X, Y) & Z axes rapid travel 2500 / 750 mm/min 2500 / 750 mm/min 2500 / 750 mm/min 2500 / 750 mm/minTurret head spindle 5 HP - 5 HP 5 HPHorizontal spindle - 5 HP 5 HP 5 HPNet / gross weight 2250 / 2550 Kg 2250/ 2550 Kg 2500 / 2800 Kg 2650 / 2950 KgDimensions (L x W x H) 2060 x 1820 x 2240 mm 2060 x 1820 x 2240 mm 2060 x 1820 x 2240 mm 2060 x 1820 x 2240 mm

Vertical spindle / Turret head Spindle speeds 16 steps, 75 - 3600 rpm - 16 steps, 75 - 3600 rpm 16 steps, 75 - 3600 rpmQuill travel 140 mm - 140 mm 140 mmQuill feedrate (3 steps) 0.035, 0.07, 0.14 mm/rev - 0.035, 0.07, 0.14 mm/rev 0.035, 0.07, 0.14 mm/revSpindle taper #40 N.S.T - #40 N.S.T #40 N.S.TSwivel of spindle head (R & L) 45° - 45° 45°Swivel of overarm 360° - 360° 360°Overarm travel 660 mm - 660 mm 660 mmSpindle nose to table surface 110 - 560 mm - 110 - 560 mm 110 - 560 mmSpindle center to column 110 - 700 mm - 110 - 700 mm 110 - 700 mm

Powerful vertical headSpindle speeds - 9 steps, 85 - 1300 rpm - 9 steps, 85-1300 rpmSpindle taper - #40 N.S.T - #40 N.S.TSpindle nose to table surface - 0 - 386 mm - 0 - 386 mmSpindle center to column - 369 mm - 369 mm

Horizontal spindle / Horizontal headSpindle speeds - 9 steps, 85-1300 rpm 9 steps, 85-1300 rpm 9 steps, 85-1300 rpmSpindle taper - #40 N.S.T #40 N.S.T #40 N.S.TSpindle center to table surface - 0 - 450 mm 0 - 450 mm 0 - 450 mmSpindle center to arm bottom - 369 mm 369 mm 369 mm

FEATURES:• The spindle is precision machined from SCM-21 alloy steel• X and Y axes are driven by an AC servo motor for smooth traverse• The knee is power elevated and has rapid traverse function• With an automatic lubricator parts

OPTIONAL ACCESSORIES:• Turret head variable speeds 80 - 3800 rpm• Digital readout• Air power draw bar• Dividing head• Rotary table• Swivel milling vise• End mill collets

STANDARD ACCESSORIES:• Automatic lubricator• Ball screw (X, Y)• Complete cooling system• Tool kits / Tool box• Milling arbor with spacer• Draw bar• Splash guard• Chip guard & Coolant tray• High pressure coolant pump• Halogen work fight

JY-2TVertical Turret Milling Machine

JY-2VHVertical & Horizontal Milling Machine

JY-2HTHorizontal Vertical Turret Milling Machine

JY-2VHTHorizontal Vertical Turret Milling Machine

9

UNIVERSAL MILLING MACHINE

FEATURES:• High precision spindles use class 7 angular contact bearings• Dynamically balanced motor and ground pulleys• The dovetail and square slideways of the table, saddle and column are

laminated with turcite-B• Double-nut mounting of table and saddle lead screws eliminates backlash• One-piece pinion gear and shaft; one-piece worm gear & shaft• One shot lubricator• Rigid meenhanite GC castings• Unique double nuts & backlash adjusting design

OPTIONAL ACCESSORIES:• Air power drawbar• Powerfeed system• Gearfeed system• Machine lamp• Control box system• Coolant pump & fittings• Oil tray for FM-3VS/2S• DRO• Machine lamp• Milling chuck set with collet (6 , 8 , 10 , 12 , 16 , 20 , 25mm)

DESCRIPTION FM-2S FM-3VS FM-2SK FM-3VK FM-2SKH FM-3VKH FM-4SKH FM-4VKHTable size 230 x 1066 mm 254 x 1270 mm 254 x 1270 mm 254 x 1270 mmGuideway Dovetail Dovetail Knee column squareway + table dovetailLongitudinal travel 750 mm 901 mm 760 mm 760 mmCross travel 305 mm 400 mm 390 mm 400 mmVertical travel (knee) 406 mm 370 mm 380 mm 370 mmTable T-slots 3 / 16 3 / 16 3 / 16 3 / 16Maximum load 340 Kg 430 Kg 450 KgVertical spindle motor 2 HP 3 HP 2 HP 3 HP 2 HP 3 HP 3 HP 5 HPSpindle speeds 60 ~ 2280 rpm 50 ~ 3750 rpm 60 ~ 2280 rpm 50 ~ 3750 rpm 60 ~ 2280 rpm 50 ~ 3750 rpmSpindle taper #30 NST #30 NST #30 NST #40 NSTSpindle nose to table 70 ~ 476 mm 70 ~ 440 mm 40 ~ 420 mm 60 ~ 530 mmSpindle center to column surface 71 ~ 476 mm 102 ~ 652 mm 102 ~ 652 mm 150 ~ 700 mmSpindle quill travel 127 mm 127 mm 127 mm 127 mmAutomatic vertical feeds 0.04, 0.08, 0.14 mm/rev 0.04, 0.08, 0.14 mm/rev 0.04, 0.08, 0.14 mm/rev 0.04, 0.08, 0.14 mm/revOverarm travel 305 mm 550 mm 550 mm 550 mmOverarm swivel 360° 360° 360° 360°Floor space (Lx Wx H) 2200 x 1600 x 2100 mm 2650 x 2000 x 2200 mm 2600 x 2000 x 2150 mm 2600 x 2300 x 2300 mmWeights approx. 1080 Kg 1080 Kg 1520 Kg 1550 Kg

10

DESCRIPTION Z3050 × 16/1 Z3063 × 20/1 Z3080 × 25Maximum drilling diameter Ø 50 mm Ø 63 mm Ø 80 mm

Distance between spindle axis and columnMax 1600 mm 2000 mm 2500 mmMin 350 mm 450 mm 500 mm

Distance spindle nose and surface base plateMax 1220 mm 1600 mm 2000 mmMin 320 mm 400 mm 550 mm

Spindle travel 315 mm 400 mm 450 mmSpindle taper MT#5 MT#5 MT#6Range of spindle speeds 25 - 2000 rpm 25 - 1600 rpm 16 - 1250 rpmNumber of spindle speeds 16 16 16Range of spindle feeds 0.04 - 3.20 mm/rev 0.04 - 3.20 mm/rev 0.04 - 3.20 mm/revNumber of spindle feeds 16 16 16Table size 500 × 630 mm 630 × 800 mm 800 × 1000 mmTravel of spindle head 1250 mm 1550 mm 2000 mmPower of main motor 4 kW 5.5 kW 7.5 kWNet weight 3500 Kg 7000 Kg 11000 KgDimensions (L × W × H) 2500 × 1070 × 2840 mm 3080 × 1250 × 3291 mm 3730 × 1400 × 4025 mm

RADIAL DRILLING MACHINE

▲ Hydraulic Clamping System

▲ Spindle and feed

▲ Arm Clamping Part

▲ Operation panel on spindle box

FEATURES:• Clamping and speed cahnge of spindle is archived by hydraulic clamping system• The spindle is automatical feed as well as micro feed (16 steps)• The machine is mainly used to machining holes, such as drilling, reaming and chambering etc.• Arm can swivel ± 180°

STANDARD ACCESSORIES:• Box table• Coolant system• Soundation bolt• Tools

OPTIONAL ACCESSORIES:• Reducing sleeve• Drift• Tiltiing work table

11

COLUMN DRILLING MACHINE

FEATURES:• Thin oil lubrication is available for drilling diameter 50mm, grease

lubrication is available for others• Superior quality of gears with hardened and lapped gears of surface• Model of machine is electromagnetism clutch transmission feed• All parts made with quality cast iron

STANDARD ACCESSORIES:• Tool shank adaptor• Key type drill chuck• Wedge for taper shank tool

OPTIONAL ACCESSORIES:• Diameter 6 - 16 mm collets• Collet shanks• 125mm precision vise

DESCRIPTION ZN5032A    ZN5050A  Maximum drilling and tapping diameter (steel) Ø 32 / M22 mm Ø 50 / M24 mmMaximum travel of spindle 155 mm 200 mmFrom spindle to generating line of column (max.) 320 mm 360 mmBetween spindle end to work table surface (max.) 620 mm 590 mmFrom spindle end to surface of base work table (max.) 1265 mm 1175 mmMaximum travel of spindle box 285 mm -Maximum travel of work table and bracket (manual) 490 mm 410 mmSwivel angle of work table ± 45° ± 45°Spindle taper bore MT#4 MT#4Spindle speed steps 12 12Spindle speed range 125 - 3030 rpm 54 - 1400 rpmSpindle feed steps 3 4Spindle feed range 0.1 / 0.2 / 0.3 mm/rev 0.1 - 0.4 mm/revDimension of work table 500 x 420 mm 580 x 460 mmEffective work area of work table 370 x 360 mm 445 x 435 mmDiameter of column Ø 120 mm Ø 160 mmPower of motor 1 / 1.2 kW 2.2 / 3 kWMachine dimensions 880 x 520 x 2220 mm 940 x 680 x 2400 mmNet /  gross weight 500 / 555 Kg 620 / 675 Kg

12

BONTANGTel. : 0811 581 2198CIKARANGTel. : (021) 8984-5858CILEGONTel. : (0254) 387-987LAMPUNGTel. : (0721) 474-480MALANGTel. : (0341) 321-328

MEDANTel. : (061) 452-7269PALEMBANGTel. : (0711) 351-198PEKANBARUTel. : (0761) 282 98SAMARINDATel. : (0541) 410-0637SEMARANGTel. : (024) 355-8788

SURABAYA (Juanda)Tel. : (031) 868-8328TANJUNG MORAWATel. : (061) 794-1328YOGYAKARTATel. : (0274) 642-9098

KLS/

P&A.

472/

2K/G

T.MD1

/YOP

.UNI

/07.1

7