Channel Partner
E: [email protected] • www.alstoneindia.comToll Free No. 1800-1233123 • SMS ACP TO 56161
Branch Offices:Bangalore • Chennai • Delhi • Hyderabad • IndoreKochi • Kolkata • Lucknow • Noida • Patna • Pune • Ranchi.
ISO 9001:2008Company
Exterio
r
For a very long time, traditional wood – with its pristine looks has been used in
various ways to suffice for our dwelling needs. Our buildings always used the
beauty and usefulness of wood. However, in-spite of its advantages, wood had
some serious shortcomings. First, it was not in abundant supply. Second, it had a
life limited to a couple of years and its maintenance was not easy.
It is here that ALSTONE brought forward AHPL, which is an Aluminium based
High Pressure Laminate (HPL). It is more durable and elegant in looks as
compared to wood. It is also highly weather resistant. AHPL has overcome the
shortcomings of wood as it is manufactured using aluminium coil with double
layered Lumiflon coating that is resistant to dust. It has a polyethylene core that
makes it resistant to water, fungus and termite. AHPL is manufactured in a state-
of-the-art facility. The manufacturing process is so stringent unlike other
prevalent High Pressure Laminates and of course wood, Alstone HPL panels
are so robust that it is highly effective under extreme weathering conditions.
To top it all Alstone HPL comes in a variety of colors, textures and sizes.
ALSTONE also offers customized colors and sizes. All this at a very competitive
price coupled with an unmatched quality. AHPL has redefined the concept of
high-end facade and exterior. ALSTONE offers professional service as it has a
robust marketing network in India and abroad. Whether it is Villas, housing
societies, corporate buildings or resorts, AHPL is a perfect foil in place of wood Intro
duction Welcome to the company that is committed to provide technically
advanced & durable products.
A pioneer of ACP products in India, Alstone occupies the unrivaledposition of being an industry leader. We offer the widest range ofinnovative Aluminium Composite Panels to be used in Exterior &Interior construction applications.
With our state-of-the-art manufacturing facilities we maintainstringent quality control norms at every stage to ensure industryleading products.
We have earned our reputation by providing highly durable andcustomized products by giving efficient pre and post sales service.
MissionWe exist to provide support for India’s infrastructure in order tomake it future ready.
Values to guide usInnovation: It is our consistent endeavour to be ahead in themarket and customer expectations.
Inspired Workforce: Our people are what makes Alstone group aforce in its category. Their regular training, skills upgrade andwelfare is always a top priority.
India Proud: Encouraging local talent and resources is a way of lifeat Alstone.
Quality Focus: We strive to achieve quality at every step either itis pre-sales,manufacturing or post sales.
Applications• WALL CLADDING
• BALCONY CLADDING
• ATTIC CLADDING
• OUTDOOR CLADDING
• GATE ELEVATION
• RAFTERS
• RAILING
• CEILING
• PERGOLA
• FENCES
• LOUVERS
• CANOPY
Water & Fungus Proof
CNC Cutting Possible
Light Weight
Termite Resistant
Easy to Clean
Easy to InstallWeather Resistant
Wide Range of Colours & Designs
Aluminium base HPL
UV Resistant
Green Product
Lumion Coating
Features
DimensionsStandard
Sheet Size4 x 8
6mmThickness
*Customized length can be provided on special request
Fixing Method
Aluminium Section25mm x 50mm x 1.6mm
Black Paint on Plastered Wall Aluminium angle (cleat)19mm x 19 x 2mm
With Rivets (powder coated)
SS 25” (star headed)
Rowel plug25 mm
Without Rivets( )
Gap between panel(3-6mm)
Thicknessof Sheet
Minimum distanceof holes to edge
Maximum distancebetween the holes-width
Maximum distancebetween the holes-length
6mm 10-20mm 450mm 550
Panels can be inCONVEX
orCONCAVE
shapes
Panels can bebend on 90° angle
* Product color may vary from actual shade. Please refer shade card / sample for actual shade before placing the order.
Fixing Detail (with Rivets) Fixing Detail (without Rivets)
• Slightly rub off the surface of aluminium section &
portion of plank with the help of sand paper before
apply Adhesive on it.
• Don't use any silicon in gap filling.
• Maintain the minimum gap of 3mm to 6mm in
between the Planks.
• Black Paint on Plastered Wall.
• Fix aluminium section on wall, maintain gap of 400 - 700mm
center to center with help of cleat vertically.
• Pilot hole must be pre- drilled before fastening rivets tight.
• Size of rivets must be three times the thickness of panel
and gauge of aluminium. Ensure rivets used are fully
threaded.
(Recommendation)
HPL - 203 AMERICAN WALNUT
HPL - 204 CLASSIC WALNUT
HPL - 201 SAFARI WOOD
HPL - 202 CHOCOLATE ZEBRANO
HPL - 217 ROSEWOOD
COMING SOON
31.
32.
33.
ADHESION
Dry ASTM D-3359 Method 8
Wet 37.8ºC, 24 Hrs
Boiling Water 1000C, 20mm
No Change
No Change
No Change
34.
35.
36.
37.
38.
CHEMICAL RESISTANCE
HCL (ASTM D1308-79)
H2 SO4(ASTM D1308-79)
Detergent(ASTM D2248-73)
Oil Resistance
Dirt Resistance
No Change
No Change
No Change
No Change
No Change
39.
40.
41.
42.
WEATHERABILITY
43.
44.
45.
Colour Retention (ASTM D-2244-89 Max 5 Units)
Gloss Retention ASTM D-523-89 70%
Chalking ASTM D-4214-89 Max 8 Units
Salt Spray
Humidity ASTM D-2247-87
Humidity (Thermal ASTM D-2244-65)
Condensing Humidity 54.4ºC ASTM 4585-87
4000 Hrs
4000 Hrs
No Chalking was seen 4000Hrs
No Change 3000 Hrs
No Blister, No Craking,10 Cycles:24Hrs X 100% RH, 37.8ºC:2 HrsX 18ºC
4HrsX24ºC
None to very few # 8 blisters 100%
Rhx 54.4ºC, 2500 Hrs
24.
25.
26.
27.
28.
29.
30.
GENERAL PROPERTIES
Gloss at 60º
Elongation ASTM E-8
Abrasion Resistance (ASTM – D – 968-81)
Hardness (Pencil hardness)
Film Hardness (Pencil hardness)
Rigidity E-J (KN cm 2/3)
Reverse Impact Crosshatch ASTM01737-62
26
A50>=3%
The painted film doesn’t wear out through pouring 50 Ltrof sand on thesurface of the coated panel. 3H
2H
865
2T, No Cracking
Technical Specifications Of ALSTONE HPL
S.NO
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
16.
11.
17.
12.
18.
13.
21.
19.
14.
22.
20.
15.
23.
ACOUSTICAL PROPERTIES
MECHANICAL PROPERTIES OF ALUMINIUM SKIN
MECHANICAL PROPERTIES OF ACM
ITEMS
Thickness of Composite Panel (mm)
Skin thickness (mm)
Weight (Kg/Sqm)
Polyethylene type LDPE (g/ cm3)
Surface
Lacquering
Brilliance (Initial Value)
Hardness (Pencil hardness)
Temperature resistance
UV Stability
Aluminium Alloy Grade
Tensile Strength (ASTM E-8)
Yield Strength (ASTM E-8)
Yield strength (ASTM E-8)
Modules of Elasticity (ASTM C-393)
Elongation (ASTM E-8)
Sound Absorption Factor as
Bond Integrity (ASTM C-297)
Flexural Elasticity (ASTM C-393)
Air born sound insulation index Rw (dB)
Deflection Temperature (ASTM D-648)
Thermal Expansion (ASTM D-698)
Loss factor d
ALSTONE HPL
6mm
0.25mm
7.5Kg
0.92
----
LUMIFLON / PVDF
30-30% accord to Gardner
3H
From- 50 to +80° C
Brillant
H 18 – 1100
4.2 KgmP²
14 Kg/mm²
4 KgmP²
7000 Kg/mm²
13%
0.05
118 Kg/cm²
4030 Kg/mm²
24
110ºC
1.1 mm/M/50ºC
0.0057
Transport, Handling & Storage
Both lms face each other
Alstone HPL Exterior panels should be handled with care in order not
to damage the edge and surface of the high-quality material.
Alstone HPL Exterior cladding panels must be secured against slippage
during transport. when loading or unloading, the panels must be lifted.
Do not push or pull them over the edge. Remove the Film within 45day
after Installation of Panels.
All panels must be stacked horizontally on flat, stable supports and
supporting panels. the goods must lie completely flat. Incorrect storage
can lead to permanent deformation of the panels.