+ All Categories
Home > Documents > Untitled - Anglers Resource

Untitled - Anglers Resource

Date post: 17-Feb-2022
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
24
Transcript

The Anglers Resource Shop Reference for Grips and Reel Seatsfeatures 81 handle configurations available from the productscurrently stocked by Anglers Resource. This is the first imagebased source for how finished grips will appear when youchoose to use them on various projects. Suggested layouts areactual photos of handles. Cork, reel seats, arbors and evenwinding checks are shown in position. Included with eachimage are part numbers and a complete order list for any cho-sen configuration.

The Manual provides a one stop source to guide customersthrough the often confusing task of selecting all the pieces in ahandle system that may at times include up to 10 separatecomponents. By asking specific questions and allowing cus-tomers to ”shop” the manual, builders can be sure that whatthe customer sees is what he will get and hobbyists can knowin advance how their projects will look when complete.

We hope you enjoy this tool and look forward to providing anever expanding source for information about our products. Ifyou have any further questions, please email them to info@an-glersresource or call us at 251-943-4491

About this Reference Guide...

SK2 CASTING Reel Seat / Grip Con�gurationsThe following con�gurations show all combinations currently available for the SK2 Casting Seat. All components are noted in the “ORDER LIST”. Append 16 or 17 at the end of each stock number to designate size: Ex: SKSPSN16NOTE: Winding check AWC is available in Silver, Red, Blue and Gold; WCS is available in Black, Gold and Silver. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVAIMPORTANT NOTE: NSA Arbors should be shortened approximately 1/8 inch to accept WCS winding checks in casting and spinning bodies.

WCSWCS

NSA16 or 17 (included)

NSA16 or 17 (included)

NSA16 or 17 (included)

RGSK1617RCORDER KIT SKTS16 or 17 AWC

WCS

WCS

WCS

REEL SEAT KIT INCLUDES: Trigger Body, Downlocking Hood with Graphite/Nylon Nut, Threaded Barrel and arbors for both pieces. Does NOT include WCS or AWC winding checks, speci�ed cork or EVA.

ORDER LIST1 ea...SKTS16 (or 17)

1 ea...RGSK1617RC (or E=EVA)

1 ea..BGK485RC or BGS65RC ( E=EVA)

2ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

3ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

ORDER LIST1ea...SKTPSM16 (or 17)

1 ea...RGSK1617RC (or E=EVA)

1ea...BGK485RC or BGS65RC (E=EVA)

2ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

3ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

RGSK1617RCORDER KIT SKTPSM16 or 17 AWC

REEL SEAT KIT INCLUDES: Trigger Body, Downlocking Hood with Traditional Metal Hood, Threaded Barrel and arbors for both pieces. Does NOT include WCS or AWC winding checks, speci�ed cork or EVA.

SK2 CASTING HANDLE WITH SPLIT GRIP AND GRAPHITE/NYLON HOOD & LOCKING NUT

SK2 CASTING HANDLE WITH SPLIT GRIP AND TRADITIONAL METAL HOOD

ORDER LIST 1ea...KSKTS16 (or 17)

1 ea...RGSK1617RC (or E=EVA)

1ea...BGK485RC or BGS65RC(E=EVA)

1ea...BGKS16RC or 17RC (or E=EVA)

2ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

2ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

RGSK1617RC

Quoted Lengths are for CORK (EVA) only, not cork and seat components combined.Questions visit our website at Anglersresource.net, email: [email protected]

ORDER KIT KSKTS16 or 17 AWC

BGKS16RC or 17RC

REEL SEAT KIT INCLUDES: Trigger Body, Downlocking Hidden Thread Hood, Threaded Barrel and arbors for both pieces. Does NOT include WCS or AWC winding checks, speci�ed cork or EVA.

SK2 CASTING HANDLE WITH SPLIT GRIP, HIDDEN THREAD FOREGRIP & GRAPHITE HOOD

SKTPSM16(or 17) = Frosted HoodSKTPSM16B(or 17) = Black HoodSKTPSM16GB (or 17) = Gunsmoke Hood

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

Lgth = 42mm (16), 45mm (17)Dia = 26mm (16), 28mm (17)

Lgth = 83mmDia = 28mm

Lgth = 83mmDia = 28mm

Lgth = 83mmDia = 28mm

PAGE 3

BGK485RC or BGS65RC (Extended)

BGK485RC or BGS65RC (Extended)

BGK485RC or BGS65RC (Extended)

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

REF# RSK01

REF# RSK02

REF# RSK03

ORDER LIST1 ea...SKTS16 (or 17)

1 ea...RGSK1617RC (or E=EVA)

1 ea...BGK485R C or BGS65RC

(or E=EVA)

1 ea...FGS2RC (or E=EVA)

3ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

2ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX:

RGSK1617RCORDER KIT SKTS16 or 17 AWCAWC

FGS2RC

AWC

REEL SEAT KIT INCLUDES: Trigger Body, Downlocking Graphite/Nylon Hood & Nut, Threaded Barrel and arbors for both pieces. Does NOT include WCS or AWC winding checks, speci�ed cork or EVA.

SK2 CASTING HANDLE WITH SPLIT GRIP, UNIVERSAL FOREGRIP & GRAPHITE HOOD & NUT

WCS

ORDER LIST1ea...SKTPSM16 (or 17)

1 ea...RGSK1617RC (or E=EVA)

1ea...BGK485RC or BGS65RC

(or E=EVA)

1ea...FGS2RC (or E=EVA)

3ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWCB12.5 = Blue with 12.5mm I.D.

2ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

RGSK1617RCORDER KIT SKTPSM16 or 17 AWCFGS2RC

REEL SEAT KIT INCLUDES: Trigger Body, Downlocking Traditional Metal Hood, Threaded Barrel and arbors for both pieces. Does NOT include WCS or AWC winding checks, speci�ed cork or EVA.

SK2 CASTING HANDLE WITH SPLIT GRIP, UNIVERSAL FOREGRIP & TRADITIONAL HOOD

SKTPSM16(or 17) = Frosted HoodSKTPSM16B(or 17) = Black HoodSKTPSM16GB (or 17) = Gunsmoke Hood

WCS

WCS

NSA16 or 17 (included)

NSA16 or 17 (included)

ORDER LIST1ea...SKTS16/B (or 17)

1 ea...RGSK1617RC (or E=EVA)

1ea...BGK485RC or BGS65RC

(or E=EVA)

1ea...KDPS16ASH (or 17)

1ea...SKSPSN16 (or 17)

1ea...FGK25(or 27)RC (or E=EVA)

3ea...NSA16 (or 17)

3ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

2ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

RGSK1617RCSKTS16 or 17/BSKSPSN16 or 17

KDPS16 or 17 ASHFGK25RC (size 16)FGK27RC (size 17) AWC

AWC

THIS IS NOT A KIT: Order all pieces shown in the order list at left.

SK2 CASTING HANDLE WITH SPLIT GRIP AND “KDPS” HIDDEN THEAD FOREGRIP

KDPS16ASH(or 17) = Frosted HoodKDPS16BASH(or 17) = Black HoodKDPS16GBASH (or 17) = Gunsmoke Hood

SK2 CASTING Reel Seat / Grip Con�gurations (continued)

Lgth = 83mmDia = 28mm

Lgth = 51mmDia = 25.5mm

Lgth = 83mmDia = 28mm

Lgth = 51mmDia = 25.5mm

Lgth = 83mmDia = 28mm

Lgth = 51mmDia = 25.5mm

KDPS is a tubed hood with matching cork sleeve.Positioned properly it can completely cover threaded barrels on many handle designs.

NSA16 (or 17)

PAGE 4

BGK485RC or BGS65RC (Extended)

BGK485RC or BGS65RC (Extended)

BGK485RC or BGS65RC (Extended)

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

REF# RSK04

REF# RSK05

REF# RSK06

(A)18mm

Tenon length should be between 2 and 6 mm

Handle length and pro�le of any design

(B)1

5mm

For size 17 KSKTS dimension “A” = 20mm, “B” = 17

IMPORTANT DIMENSIONS FOR BUILDING CUSTOM CORK OR EVA FOR SK2 CASTING SEATS

WCS

ORDER LIST1ea...SKTS16/B (or 17)

1 ea...RGSK1617RC (or E=EVA)

1ea...BGK485RC or BGS65RC

(or E=EVA)

1ea...HPS16N (or 17)

1ea...SKSPSN16 (or 17)

1ea...FGH25(or 27)C (or E=EVA)

3ea...NSA16 (or 17)

2ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

2ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

RGSK1617RCSKTS16 or 17/BSKSPSN16 or 17

HPS16 or 17NFGH25C (size 16)FGH27C (size 17) AWC

THIS IS NOT A KIT: Order all pieces shown in the order list at left.

SK2 CASTING HANDLE WITH SPLIT GRIP AND “HPS” HIDDEN THEAD FOREGRIP

Lgth = 83mmDia = 28mmLgth = 64mm (16), 70mm (17)

Dia = 28mm (16), 30mm (17)NSA16 (or 17)

SK2 CASTING Reel Seat / Grip Con�gurations(continued)

HPS Hidden Thread Hoods can be used any time it is desireable to cover threads on any handle design. The unique design of the HPS allows it to tighten and hold the reel foot at any point along the full circumference of the hood. There is no “pocket” to accept the reel foot. 100% graphite/nylon construction makes this seat totally corrosion proof and one of the lightest reel seat components in Fuji’s line.

BGKSRC is a shorter SK2 butt cap suitable for light and ultralight layouts using size 16 SK2 seats. It can be used in any con�guration above but should be selected only for rod blanks under 1/2-inch in butt diameter. Also available in EVA, BGKSE

HPS Hidden Thread Hood uses a tubed seat design with matching cork sleeve. Threaded Barrel is “hidden” in tube when tighten on the reel foot.

PAGE 5

BGK485RC or BGS65RC (Extended)

485 Lngth = 2 in6 5 Lngth = 2.5 inDia = up to 28mm

For size 16 KSKTS

REF# RSK07

ASTING RSK2 C

t / Greel SASTING R

tionson�gurip C

GE 5AP

BGK485R 1ea...

(or E=EVRGSK1617RC 1 ea...

SKTS16/B (or 17)1ea...

ORDER LIST

SK2 CASTING HANDLE WITH SPLIT GRIP AND “HPS” HIDDEN THEAD FOREGRIP

tinued)on(cASTING RSK2 C

e 17)FGH27C (size 16)FGH25C (siz HPS16 or 17N

A) V VA)

SK2 CASTING HANDLE WITH SPLIT GRIP AND “HPS” HIDDEN THEAD FOREGRIP

tinued)t / Greaeel SASTING R

HPS16 or 17N

SKSPSN16 or 17S16 or 17/BTSK

SK2 CASTING HANDLE WITH SPLIT GRIP AND “HPS” HIDDEN THEAD FOREGRIP

tionsaon�gurip Ct / Gr

CGSK1617RR

SK2 CASTING HANDLE WITH SPLIT GRIP AND “HPS” HIDDEN THEAD FOREGRIP

tions

CAW

ended) tC (Exor BGS65RC BGK485R

12.5mm I.D.WC12.5B = Blu 16.5mm) EX: A W

half mm increments from 6.0 to (order I.D. equal to diameter of blank in

Red,Blue,Silver or CAW2ea...

NSA16 (or 17)3ea...

(or E=EFGH25(or 27)C1ea...

SKSPSN 1ea...

HPS16N 1ea...

A)(or E=EV VA)

BGK485R 1ea...

WC12.5B = Blue with half mm increments from 6.0 to (order I.D. equal to diameter of blank in

Gold

A) EV VA) ( ), 30mm (17)

voo ceable tdesiread Hoods can be used anhrTidden HPS H

NSA16 (or 17)

he Tn. y handle desigeads on aner thry time it is ead Hoods can be used an

.tt lefder list aorder all piec: Or A KITOTNTHIS IS

wn in the es shoder all piec

o 28mmDia = up t6 5 Lngth = 2.5 in

IGWCS13 -Gold with 13mm I.D.increments from 7.0 to 16.0mm) EX:

blank in half mm equal to diameter of(order I.D. WCS16 (or 17) (black). No Letter (silver), S (gold), IG2ea...

IGWCS13 -Gold with 13mm I.D.increments from 7.0 to 16.0mm) EX:

blank in half mm (order I.D. No Letter

be selecusing siz

C is a shorBGKSR

ujits in Fomponencosion prrorotally ct

ylon ce/naphitr100% gherT. of the hoodt anoot aeel fthe r

n of the HPS allounique desigvoo ceable tdesir

od blanks under 1/2-inch in butt diametor red only fty ct can be used in an. Itse 16 SK2 seausing siz

or ligher SK2 butt cap suitable ftC is a shor

.s line’’s lineujit eel seaest rtoof and one of the lighosion pr

t tion makes this seaonstrucylon c. ooteel fept the rco ac t”” tpocket“e is no

e encercumft along the full ciry point anen and hold to tighs it twn of the HPS allo

he Tn. y handle desigeads on aner thr

. ooteel fr i ”” hidden“el is readed BarhrT. ek sleevorc

ead Hood uses a tubed seahrTidden HPS H

lso . Aerod blanks under 1/2-inch in butt diamete but should vtion aboaon�gury c

outs yt laalight and ultror ligh

en on the t in tube when tighching tn with mat desigead Hood uses a tubed sea

REF# RSK07

ANT TTANT DIMENSIONS FOR BUILDING CUSTOM CORK OR EVIMPOR

ANT DIMENSIONS FOR BUILDING CUSTOM CORK OR EV

ailable in Eva

ANT DIMENSIONS FOR BUILDING CUSTOM CORK OR EV

A, BGKSEVVA, BGKSEailable in E

A FOR SK2 CASTIN OR EV VA FOR SK2 CASTING SEA

TS NG SEA ATS

or sizF

(B)1

5mm

Handle length and pr

enon length should be betT

)18mmA((A

STe 16 KSKor siz

ny desigo�le of anHandle length and pr

een 2 and 6 mmwenon length should be bet

Handle length and pr

e 17 KSKor sizF

ny desigo�le of anHandle length and pr

= 20m ”” = 20mm, A““AS dimension Te 17 KSK

= 17”” = 17“B = 20mm,

SK2: UPLOCKING Spinning Seat / Grip Con�gurationsThe following con�gurations show all combinations currently available for the SK2 Spinning Seat. All components are noted in the “ORDER LIST”. Append 16 or 17 at the end of each stock number to designate size: Ex: SKSPSN16NOTE: Winding check AWC is available in Silver, Red, Blue and Gold; WCS is available in Black, Gold and Silver. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA

WCSAWC

BGSK16 or 17RCORDER KIT KSKSS16 or 17

REEL SEAT KIT INCLUDES: Spinning Body, Uplocking Hidden Thread Hood and arbors for both pieces. Does NOT include WCS winding checks, speci�ed cork or EVA.

ORDER LIST1 ea...KSKSS16 (or 17)

1 ea...BGSK16 or 17RC (or E=EVA)

1 ea...BGK485RC or BGS65RC

(or E=EVA)

1 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

3ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

SK2 SPINNING SPLIT GRIP HIDDEN THREAD NO FOREGRIP

WCS

NSA16 or 17

NSA16 or 17 (included)

AWC

FGH25C (16)FGH27C (17)

HPS16N or 17

SKSPSN16 or 17SKSS16/B or 17

THIS IS NOT A KIT: Order all parts in the ORDER LIST at left

ORDER LIST1 ea...SKSS16/B or 17/B

1 ea...HPS16N or 17N

1 ea...SKSPSN16 or 17

1 ea...FGH25C (16) or 27C (17)cork only

1 ea...BGK485RC or BGS65RC

(or E=EVA)

3 ea...NSA16 or 17

1ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

3ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH NO FOREGRIP

WCS

WCS

NSA16 or 17

AWC

FGK25C (16)FGK27C (17)

KDPS16ASH or 17

SKSPSN16 or 17SKSS16/B or 17

THIS IS NOT A KIT: Order all parts in the ORDER LIST at left

ORDER LIST1 ea...SKSS16/B or 17/B

1 ea...KDPS16ASH or 17

1 ea...SKSPSN16 or 17

1 ea...FGK25C (16) or 27C (17)cork only

1 ea...BGK485RC or BGS65RC

(E=EVA)

3 ea...NSA16 or 17

1ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

3ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIP

WCS

Lgth = 42mm (16), 45mm (17)Dia = 26mm (16), 28mm (17)

Lgth = 64mm (16), 70mm (17)Dia = 28mm (16), 30mm (17)

Lgth = 57mm (16), 65mm (17)Dia = 27mm (16), 28mm (17)

PAGE 6

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

BGK485RC or BGS65RC (Extended)

BGK485RC or BGS65RC (Extended)

BGK485RC or BGS65RC (Extended)

REF# RSK08

REF# RSK09

REF# RSK10

KDPS16ASH(or 17) = Frosted HoodKDPS16BASH(or 17) = Black HoodKDPS16GBASH (or 17) = Gunsmoke Hood

OCKING Spinning SSK2: UPL

GE 6AP

OCKING Spinning S

ip Ct / GreaOCKING Spinning S

tionsaon�gurip C

t the end of the st a”” aC“er he lettTTE: NOinding check AWTE: NO

t the end of each st17 aaon�gurwing collohe fT

OCKING Spinning SSK2: UPL

SK2 SPINNING SPLIT GRIP HIDDEN THREAD NO FOREGRIP

or BGS65RCBGK485RC 1 ea...

(or E=EVBGSK16 or 17RC 1 ea...

KSKSS16 (or 17)1 ea...

ORDER LIST

ORDER KIT KSKSS16 or 17

es a ctock number indicat the end of the st, Blue and Ged, Rerr, Railable in SilvvWC is a A AWC is ae: Ex: SKSPSN16e siztnao desigock number tt the end of each st

tly aenrtions curombinaw all ctions shoa

OCKING Spinning S

SK2 SPINNING SPLIT GRIP HIDDEN THREAD NO FOREGRIP

or BGS65RC

A)(or E=EV

ORDER KIT KSKSS16 or 17

tical paror iden f“E”” fe , substitutiprk gores a cold and Silv, Gailable in BlackvWCS is aold; , Blue and G

e: Ex: SKSPSN16. Ateaor the SK2 Spinning Sailable fvtly a

ip Ct / GreaOCKING Spinning S

SK2 SPINNING SPLIT GRIP HIDDEN THREAD NO FOREGRIP

CBGSK16 or 17R

AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical par. erold and Silv

ORDER LIST“ed in the e notts aromponenll c. A

tionsaon�gurip C

or BGS65RBGK485R

ppend 16 or . A”” AORDER LIST

ended) tC (Exor BGS65RC BGK485R

IGWCS13 -Gold with 13mm I.D.increments from 7.0 to 16.0mm) EX:

blank in half mm equal to diameter of(order I.D. WCS16 (or 17) (black). No Letter (silver), S (gold), IG3ea...

12.5mm I.D.WC12.5B = Bl 16.5mm) EX: A AWC12.5B = Blue with

half mm increments from 6.0 to (order I.D. equal to diameter of blank in

Red,Blue,Silver or CAW1 ea...

A)(or E=EV VA)

IGWCS13 -Gold with 13mm I.D.increments from 7.0 to 16.0mm) EX:

blank in half mm (order I.D. No Letter

WC12.5B = Blue with half mm increments from 6.0 to (order I.D. equal to diameter of blank in

Gold Red,Blue,Silver or

NSA16 or 17 (included)

WCS

NSA16 or 17 (included)

CAW

k or Eor, speci�ed cWCS winding checksor both piecbors fead Hood and arhrT

UDES: Spinning BT KIT INCLREEL SEA AT KIT INCL

17) (17)

A.VVA.k or ET include oes NOD. esor both piec

idden ing H, Uplockody

REF# RSK08

o 28mmDia = up t65 Lngth = 2.5 in485 Lngth = 2 in

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH NO FOREGRIP

A)(or E=EV VA)

BGK485RC 1 ea...

1 ea...

1 ea...

1 ea...

1 ea...

ORDER LISTSKSS16/B or 17/B

HPS16N or 17N

SKSPSN16 or 1

FGH25C (16) or

or B

SKSS16/B or 17

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH NO FOREGRIPORDER LIST

S

HPS16N or 17

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH NO FOREGRIP

SKSPSN16 or 17

FGH27C (17)FGH25C (16)

CAW

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH NO FOREGRIP

or BGS65RBGK485R

C

REF# RSK08

ended) tC (Exor BGS65RC BGK485R

485 Lngth = 2 in

with 13mm I.D.from 7.0 to 16.0mm) EX: IGWCS13 -Gold

blank in half mm increments to diameter of(order I.D. equal WCS16 (or 17) (black). No Letter (silver), S (gold), IG3ea...

WC12.5B = Blue with 12.5m AW 16.5mm) EX: increments from 6.0 to

I.D. equal to diameter of blank in half mm Red,Blue,Silver or CAW1ea...

NSA16 or 173 ea...

A)(or E=EV VA)

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIP

from 7.0 to 16.0mm) EX: IGWCS13 -Gold blank in half mm increments

(order I.D. equal No Letter

WC12.5B = Blue with 12.5mm I.D.16.5mm) EX:

I.D. equal to diameter of blank in half mm Gold (order Red,Blue,Silver or

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIP

NSA16 or 17

WCS

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIP

CAW

ts in the ORDER LIST ader all par: Or A KITOTNTHIS IS

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIP

C

t t lefts in the ORDER LIST a

REF# RSK09

o 28mmDia = up t65 Lngth = 2.5 in485 Lngth = 2 in

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIP

NSA16 or 173 ea...

A)(E=EV

or BGS65RC BGK485RC 1 ea...

FGK25C (16) or 27C (17)1 ea...

SKSPSN16 or 171 ea...

KDPS16ASH or 171 ea...

SKSS16/B or 17/B1 ea...

ORDER LIST

SKSS16/B or 17S

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIP

or BGS65RC

cork FGK25C (16) or 27C (17)

ORDER LIST

SKSPSN16 17

KDPS16ASH or 17

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIP

KDPS16ASH or 17FGK27C (17)FGK25C (16)

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIPor BGS65RBGK485R

CAW

ended) tC (Exor BGS65RC BGK485R

o 28mmDia = up t65 Lngth = 2.5 in485 Lngth = 2 in

with 13mm I.D.from 7.0 to 16.0mm) EX: IGWCS13 -Gold

blank in half mm increments to diameter of(order I.D. equal WCS16 (or 17) (black). No Letter (silver), S (gold), IG3ea...

WC12.5B = Blue with 12.5m AAWC12.5B = Blue with 12.5mm I.D.16.5mm) EX: increments from 6.0 to

I.D. equal to diameter of blank in half mm Red,Blue,Silver or CAW1ea...

NSA16 or 173 ea...

from 7.0 to 16.0mm) EX: IGWCS13 -Gold blank in half mm increments

(order I.D. equal No Letter

WC12.5B = Blue with 12.5mm I.D.16.5mm) EX:

I.D. equal to diameter of blank in half mm Gold (order Red,Blue,Silver or

NSA16 or 17

ts in the ORDER LIST ader all par: Or A KITOTT NTHIS IS

KDPS16GBASH (or 17) = Gunsmoke HoodKDPS16BASH(or 17) = Black Hood

ed HoodostrKDPS16ASH(or 17) = F

t t lefts in the ORDER LIST a

KDPS16GBASH (or 17) = Gunsmoke HoodKDPS16BASH(or 17) = Black Hood

ed Hood

REF# RSK10

WCSAWC

BGSK1617RCORDER KIT SKSS16 or 17

REEL SEAT KIT INCLUDES: Spinning Body, Uplocking Hidden Thread Hood and arbors for both pieces. Does NOT include WCS winding checks, speci�ed cork or EVA.

ORDER LIST1 ea...SKSS16 (or 17)

1 ea...BGSK1617RC (or E=EVA)

1 ea...BGK485RC or BGS65RC

(or E=EVA)

1 ea...NKC16 or 17RC (or E=EVA)

2 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH “NUBBIN” FOREGRIP

AWC

WCS

NSA16 or 17

NSA16 or 17 (included)

AWC

FGH25C (16)FGH27C (17)

HPS16N or 17SKSPSN16 or 17

SKSS16/B or 17

THIS IS NOT A KIT: Order all parts in the ORDER LIST at left

ORDER LIST1ea...SKSS16/B or 17/B1 ea...HPS16N or 17N1 ea...SKSPSN16 or 171 ea...FGH25C (16) or 27C (17)

1ea...BGK485RC or BGS65RC (or E=EVA)1 ea..NKC16RC or 17RC (or E=EVA)3ea...NSA16 or 172 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH “NUBBIN” FOREGRIP

AWC

NKC16 OR 17

NKC16 OR 17

WCS

NSA16 or 17

AWC

FGK25RC (16)FGK27RC (17)

KDPS16ASH or 17SKSPSN16 or 17

SKSS16/B or 17

THIS IS NOT A KIT: Order all parts in the ORDER LIST at left

ORDER LIST1ea...SKSS16/B or 17/B

1 ea...KDPS16ASH or 17

1 ea...SKSPSN16 or 17

1ea...BGK485RC or BGS65RC

(or E=EVA)

1 ea...FGK25RC (16) or 27C (17)

1 ea...NKC16RC OR 17RC

3ea...NSA16 or 17

2 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH “NUBBIN” FOREGRIP

AWC

NKC16RC OR 17RC

SK2: UPLOCKING Spinning Seat / Grip Con�gurationsThe following con�gurations show combinations currently available for the SK2 Spinning Seat. All components are noted in the “ORDER LIST”. Append 16 or 17 at the end of each stock number to designate size: Ex: SKSPSN16NOTE: Winding check AWC is available in Silver, Red, Blue and Gold; WCS is available in Black, Gold and Silver. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA

Lgth = 64mm (16), 70mm (17)Dia = 28mm (16), 30mm (17)

Lgth = 42mm (16), 45mm (17)Dia = 26mm (16), 28mm (17)

Lgth = 57mm (16), 65mm (17)Dia = 27mm (16), 28mm (17)

PAGE 7

Lgth = sz16: 31mm sz17: 31mmDia = sz16: 18 up to 23mm sz17: 20 up to 24mm

Lgth = sz16: 31mm sz17: 31mmDia = sz16: 18 up to 23mm sz17: 20 up to 24mm

Lgth = sz16: 31mm sz17: 31mmDia = sz16: 18 up to 23mm sz17: 20 up to 24mm

BGK485RC or BGS65RC (Extended)

BGK485RC or BGS65RC (Extended)

BGK485RC or BGS65RC (Extended)

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

REF# RSK11

REF# RSK12

REF# RSK13

KDPS16ASH(or 17) = Frosted HoodKDPS16BASH(or 17) = Black HoodKDPS16GBASH (or 17) = Gunsmoke Hood

aon�gurwing collohe fT

OCKING Spinning SSK2: UPL

vtly aenrtions curombinaw ctions shoa

OCKING Spinning S

ll c. Ateaor the SK2 Spinning Sailable fv

ip Ct / GreaOCKING Spinning S

ORDER LIST“ed in the e notts aromponenll c

tionsaon�gurip C

GE 7APPA

ppend 16 or . A”” ORDER LIST

SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH “NUBBIN” FOREGRIP

A)(or E=EV VA)

or BGS65RCBGK485RC 1 ea...

(or E=EVBGSK1617RC 1 ea...

SKSS16 (or 17)1 ea...

ORDER LIST

t the end of the st a”” aC“er he lettTTE: NOinding check AWTE: NO

t the end of each st17 aon�gurwing c

ORDER KIT SKSS16 or 17

SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH “NUBBIN” FOREGRIP

or BGS65RC

A) EV VA)

C16 OR 17NK

es a ctock number indicat the end of the st, Blue and Ged, Rerr, Railable in SilvvWC is a AWC is ae: Ex: SKSPSN16e siztnao desigock number tt the end of each st

tly a

ORDER KIT SKSS16 or 17

SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH “NUBBIN” FOREGRIP

tical paror iden f“E”” fe , substitutiprk gores a cold and Silv, Gailable in BlackvWCS is aold; , Blue and G

e: Ex: SKSPSN16or the SK2 Spinning S

CBGSK1617R

SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH “NUBBIN” FOREGRIP

or BGS65RBGK485R

AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical par. erold and Silv

omponen

ended) tC (Exor BGS65RC BGK485R

ppend 16 or

IGWCS13 -Gold with 13mm I.D.increments from 7.0 to 16.0mm) EX:

blank in half mm equal to diameter of(order I.D. WCS16 (or 17) (black). No Letter (silver), S (gold), IG2 ea...

12.5mm I.D.WC12.5B = Blue with 16.5mm) EX: A

half mm increments from 6.0 to (order I.D. equal to diameter of blank in

Red,Blue,Silver or CAW2 ea...

(or E=EVNKC16 or 17RC 1 ea...

IGWCS13 -Gold with 13mm I.D.increments from 7.0 to 16.0mm) EX:

blank in half mm (order I.D. No Letter

WC12.5B = Blue with half mm increments from 6.0 to (order I.D. equal to diameter of blank in

Gold Red,Blue,Silver or

A)(or E=EV

o 24mm sz17: 20 up to 23mmDia = sz16: 18 up t

WCS

NSA16 or 17 (included)

o 24mmo 23mm

CAW

or, speci�ed cWCS winding checksor both piecbors fead Hood and arhrT

UDES: Spinning BT KIT INCLREEL SEA AT KIT INCL

C

A.VVA.k or EorT include oes NOD. esor both piec

idden ing H, Uplockodyy, UplockUDES: Spinning B

REF# RSK11

o 28mmDia = up t65 Lngth = 2.5 in485 Lngth = 2 in

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH “NUBBIN” FOREGRIP

NSA16 or 173ea...(or E=EVNKC16RC or 17RC 1 ea..

A)(or E=EVor BGS65RCBGK485RC 1ea...

FGH25C (16) or 27C (17) 1 ea...SKSPSN16 or 171 ea...HPS16N or 17N1 ea...SKSS16/B or 17/B1ea...

ORDER LIST

SKSS16/B or 17

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH “NUBBIN” FOREGRIP

A)or E=EV VA)

or BGS65RC

FGH25C (16) or 27C (17)

ORDER LISTCAW

C16 OR 17NK

SKSS16/B or 17SKSPSN16 or 17

HPS16N or 17

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH “NUBBIN” FOREGRIP

HPS16N or 17FGH27C (17)FGH25C (16)

AW

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH “NUBBIN” FOREGRIPor BGS65RBGK485R

C65 Lngth = 2.5 in485 Lngth = 2 in

ended) tC (Exor BGS65RC BGK485R

with 13mm I.D.from 7.0 to 16.0mm) EX: IGWCS13 -Gold

blank in half mm increments to diameter of(order I.D. equal WCS16 (or 17) (black). No Letter (silver), S (gold), IG2 ea...

WC12.5B = Blue with 12.5m AAWC12.5B = Blue with 12.5mm I.D.16.5mm) EX: increments from 6.0 to

I.D. equal to diameter of blank in half mm Red,Blue,Silver or CAW2 ea...

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH “NUBBIN” FOREGRIP

from 7.0 to 16.0mm) EX: IGWCS13 -Gold blank in half mm increments

(order I.D. equal No Letter

WC12.5B = Blue with 12.5mm I.D.16.5mm) EX:

I.D. equal to diameter of blank in half mm Gold (order Red,Blue,Silver or

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH “NUBBIN” FOREGRIP

o 24mm sz17: 20 up t p

NSA16 or 17

WCS

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH “NUBBIN” FOREGRIP

ts in the ORDER LIST ader all par: Or A KITOTNTHIS IS

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH “NUBBIN” FOREGRIP

t t lefts in the ORDER LIST a

REF# RSK12

o 28mmDia = up t65 Lngth = 2.5 in

NKC16RC OR 17RC1 ea...

FGK25RC (16) or 27 1 ea...

A)(or E=EV A

or BGS65BGK485RC 1ea...

SKSPSN16 or 171 ea...

KDPS16ASH or 171 ea...

SKSS16/B or 17/B1ea...

ORDER LIST

SKSS16/B or 17

T CAW

o 24mm sz17: 20 up to 23mmDia = sz16: 18 up t

CC OR 17RC16RNK

SKSS16/B or 17SKSPSN16 or 17

KDPS16ASH or 17

KDPS16ASH or 17C (17)FGK27RC (16)FGK25R

or BGS65RBGK485R

CAW

o 28mmDia = up t65 Lngth = 2.5 in485 Lngth = 2 in

ended) tC (Exor BGS65RC BGK485R

16.0mm) EX: IGWCS13 -Gold with 13mm I.D. blank in half mm increments from 7.0 to of

(order I.D. equal to diameter WCS16 (or 17) No Letter (silver), S (gold), IG2 ea...

WC12.5B = Blue with 12.5mm AAWC12.5B = Blue with 12.5mm I.D.16.5mm) EX: increments from 6.0 to

I.D. equal to diameter of blank in half mm Red,Blue,Silver or CAW2 ea...

NSA16 or 173ea...

16.0mm) EX: IGWCS13 -Gold with 13mm I.D. blank in half mm increments from 7.0 to

(order I.D. equal to diameter (black). No Letter

WC12.5B = Blue with 12.5mm I.D.16.5mm) EX:

I.D. equal to diameter of blank in half mm Gold (order

NSA16 or 17

ts in the ORDER LIST ader all par: Or A KITOTNTHIS IS

KDPS16GBASH (or 17) = Gunsmoke HoodKDPS16BASH(or 17) = Black Hood

rKDPS16ASH(or 17) = F

t t lefts in the ORDER LIST a

KDPS16GBASH (or 17) = Gunsmoke HoodKDPS16BASH(or 17) = Black Hood

ed Hoodostr

REF# RSK13

WCS AWC

BGSK16RC or 17RCORDER KIT SKSS16 or 17

REEL SEAT KIT INCLUDES: Spinning Body, Uplocking Hidden Thread Hood and arbors for both pieces. Does NOT include WCS winding checks, speci�ed cork or EVA.

ORDER LIST1 ea...SKSS16 (or 17)

1 ea...BGSK16 or 17RC

1 ea...BGK485RC or BGS65RC

1 ea...FGS2RC

3 ea...NSA16 or 17

2ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH UNIVERSAL FOREGRIP

AWC

WCS

NSA16 or 17(included)

NSA16 or 17(included)

AWC

FGH25C (16)FGH27C (17)

HPS16N or 17NSKSPSN16 or 17

SKSS16/B or 17

THIS IS NOT A KIT: Order all parts in the ORDER LIST at left

ORDER LIST1 ea...SKSS16/B or 17/B

1 ea...HPS16N or 17N

1 ea...SKSPSN16 or 17

1 ea...FGH25C (16) or 27C (17)

1 ea...FGS2RC

1ea...BGK485RC (or E=EVA)

3ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH UNIVERSAL FOREGRIP

AWC

FGS2RC

FGS2RC

FGS2RC

WCS

NSA16 or 17(included)

AWC

FGK25RC (16)FGK27RC (17)

KDPS16ASH or 17SKSPSN16 or 17

SKSS16/B or 17

THIS IS NOT A KIT: Order all parts in the ORDER LIST at left

ORDER LIST1 ea...SKSS16/B or 17/B

1 ea...KDPS16ASH or 17N

1 ea...SKSPSN16 or 17

1ea...BGK485RC (or E=EVA)

1 ea...FGK25RC (16) or 27RC (17)

1 ea...FGS2RC

2 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP

AWC

SK2: UPLOCKING Spinning Seat / Grip Con�gurationsThe following con�gurations show combinations currently available for the SK2 Spinning Seat. All components are noted in the “ORDER LIST”. Append 16 or 17 at the end of each stock number to designate size: Ex: SKSPSN16NOTE: Winding check AWC is available in Silver, Red, Blue and Gold; WCS is available in Black, Gold and Silver. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA

Lgth = 64mm (16), 70mm (17)Dia = 28mm (16), 30mm (17)

Lgth = 51mmDia = 25.5mm

Lgth = 51mmDia = 25.5mm

Lgth = 51mmDia = 25.5mm

KDPS is a tubed hood with matching cork sleeve.Positioned properly it can completely cover threaded barrels on many handle designs.

Lgth = 42mm (16), 45mm (17)Dia = 26mm (16), 28mm (17)

Quoted Lengths are for CORK (EVA) only, not cork and seat components combined.Questions visit our website at Anglersresource.net, email: [email protected]

Lgth = 57mm (16), 65mm (17)Dia = 27mm (16), 28mm (17)

PAGE 8

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

BGK485RC or BGS65RC (Extended)

BGK485RC or BGS65RC (Extended)

BGK485RC or BGS65RC (Extended)

REF# RSK14

REF# RSK15

REF# RSK16

KDPS16ASH(or 17) = Frosted HoodKDPS16BASH(or 17) = Black HoodKDPS16GBASH (or 17) = Gunsmoke Hood

OCKING Spinning SSK2: UPLGE 8AP

OCKING Spinning S on�gurip Ct / GreaOCKING Spinning S tionsaon�gur

SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH UNIVERSAL FOREGRIP

FGS2RC1 ea...

BGK485RC or BGS65RC 1 ea...

BGSK16 or 17RC1 ea...

SKSS16 (or 17)1 ea...

ORDER LIST

t the end of the st a”” aC“er he lettTTE: NOW inding check A AWC is aWTE: NOock number tt the end of each st17 ations shoaon�gurwing collohe fT

SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH UNIVERSAL FOREGRIP

BGK485RC or BGS65RC

CFGS2R

es a ctock number indicat the end of the st, Blue and Ged, Rerr, Railable in SilvvWC is ae: Ex: SKSPSN16e siztnao desigock number t

ailable fvtly aenrtions curombinaw ctions sho

ORDER KIT SKSS16 or 17

SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH UNIVERSAL FOREGRIP

tical paror iden f“E”” fe , substitutiprk gores a cold and Silv, Gailable in BlackvWCS is aold; , Blue and G

e: Ex: SKSPSN16ll c. Ateaor the SK2 Spinning Sailable f

CC or 17RBGSK16R

SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH UNIVERSAL FOREGRIP

AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical par. erold and Silv

ORDER LIST“ed in the e notts aromponenll c

or BGS65RBGK485R

ppend 16 or . A”” ORDER LIST

ended) tC (Exor BGS65RC BGK485R

IGWCS13 -Gold with 13mm I.D.increments from 7.0 to 16.0mm) EX:

blank in half mm equal to diameter of(order I.D. WCS16 (or 17) (black). No Letter (silver), S (gold), IG2 ea...

12.5mm I.D.WC12.5B = Blu 16.5mm) EX: A W

half mm increments from 6.0 to (order I.D. equal to diameter of blank in

Red,Blue,Silver or CAW2ea...

NSA16 or 173 ea...

FGS2RC1 ea...

IGWCS13 -Gold with 13mm I.D.increments from 7.0 to 16.0mm) EX:

blank in half mm (order I.D. No Letter

WC12.5B = Blue with half mm increments from 6.0 to (order I.D. equal to diameter of blank in

Gold CAW Dia = 25.5mm

Lgth = 51mm

WCS

(included)NSA16 or 17

CAW

k or Eor, speci�ed cWCS winding checksor both piecbors fead Hood and arhrT

UDES: Spinning BT KIT INCLREEL SEA AT KIT INCL

Dia = 26mm (16), 28mm (17)

A.VVA.k or ET include oes NOD. esor both piec

idden ing H, Uplockodyy, UplockUDES: Spinning B

REF# RSK14

o 28mmDia = up t65 Lngth = 2.5 in485 Lngth = 2 in

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH UNIVERSAL FOREGRIP

A)(or E EV VA)BGK485RC 1ea...

FGS2RC1 ea...

FGH25C (16) or 27C (17)1 ea...

SKSPSN16 or 171 ea...

HPS16N or 17N1 ea...

SKSS16/B or 17/B1 ea...

ORDER LISTSKSS16/B or 17

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH UNIVERSAL FOREGRIP

FGH25C (16) or 27C (17)

ORDER LIST CAW CFGS2RSKSS16/B or 17

SKSPSN16 or 17HPS16N or 17N

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH UNIVERSAL FOREGRIPHPS16N or 17N

FGH27C (17)FGH25C (16)

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH UNIVERSAL FOREGRIPor BGS65RBGK485R

CW

REF# RSK14

ended) tC (Exor BGS65RC BGK485R

65 Lngth = 2.5 in485 Lngth = 2 in

with 13mm I.D.from 7.0 to 16.0mm) EX: IGWCS13 -Gold

blank in half mm increments to diameter of(order I.D. equal WCS16 (or 17) (black). No Letter (silver), S (gold), IG2 ea...

WC12.5B = Blue with 12.5mm AAWC12.5B = Blue with 12.5mm I.D.16.5mm) EX: increments from 6.0 to

I.D. equal to diameter of blank in half mm Red,Blue,Silver or CAW3ea...

A)(or E=EV VA)BGK485RC 1ea...

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP

from 7.0 to 16.0mm) EX: IGWCS13 -Gold blank in half mm increments

(order I.D. equal No Letter

WC12.5B = Blue with 12.5mm I.D.16.5mm) EX:

I.D. equal to diameter of blank in half mm Gold (order

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP

(included)NSA16 or 17

WCS

THIS IS

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP

ts in the ORDER LIST ader all par: Or A KITOT NTHIS IS

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP

Dia 28mm (16), 30mm (17) CW

t t lefts in the ORDER LIST a

REF# RSK15

C BGK485R

o 28mmDia = up t65 Lngth = 2.5 in

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP

I.D. equal to diameter of blank in half mm Red,Blue,Silver or CAW2 ea...

FGS2RC1 ea...

FGK25RC (16) or 27RC (17)1 ea...

A)(or E=EV VA)BGK485RC 1ea...

SKSPSN16 or 171 ea...

KDPS16ASH or 17N1 ea...

SKSS16/B or 17/B1 ea...

ORDER LISTSKSS16/B or 17

C FGS2RCAW

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP

I.D. equal to diameter of blank in half mm Gold (order Red,Blue,Silver or

RC (17)

ORDER LISTSKSS16/B or 17

SKSPSN16 or 17KDPS16ASH or 17

NSA16 or 17

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP

WCS

KDPS16ASH or 17C (17)FGK27RC (16)FGK25R

SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP

KDPS16ASH(or 17) = F

CAW

ed HoodostKDPS16ASH(or 17) = F

ended) tC (Exor BGS65RC BGK485R

o 28mmDia = up t65 Lngth = 2.5 in485 Lngth = 2 in

with 13mm I.D.from 7.0 to 16.0mm) EX: IGWCS13 -Gold

blank in half mm increments to diameter of(order I.D. equal WCS16 (or 17) (black). No Letter (silver), S (gold), IG2 ea...

WC12.5B = Blue with 12.5mm AAWC12.5B = Blue with 12.5mm I.D.16.5mm) EX: increments from 6.0 to

I.D. equal to diameter of blank in half mm

from 7.0 to 16.0mm) EX: IGWCS13 -Gold blank in half mm increments

(order I.D. equal No Letter

WC12.5B = Blue with 12.5mm I.D.16.5mm) EX:

I.D. equal to diameter of blank in half mm

uestions visit our wQengths ared LuotQ

(included)NSA16 or 17

, email: inf.netecesournglersrt Ae aebsituestions visit our wk and seaor, not c) onlyAVVAORK (Eor Ce fengths ar

ts in the ORDER LIST ader all par: Or A KITOTT NTHIS IS

. nsy handle desigels on manrbareaded er thrvoely completly it can coperositioned prP

.ek sleevorching ctKDPS is a tubed hood with ma

KDPS16GBASH (or 17) = Gunsmoke HoodKDPS16BASH(or 17) = Black HoodKDPS16ASH(or 17) = F

.netecesouro@anglersr, email: inf.ombinedts component ck and sea

t t lefts in the ORDER LIST a

eaded

KDPS16GBASH (or 17) = Gunsmoke HoodKDPS16BASH(or 17) = Black Hood

ed HoodostrKDPS16ASH(or 17) = F

REF# RSK16

SK2: DOWNLOCKING Spinning Seat with Graphite Hood/Nut Grip Con�gurationsThe following con�gurations show all combinations currently available for the SK2 Spinning Seat. All components are noted in the “ORDER LIST”. Append 16 or 17 at the end of each stock number to designate size: Ex: SKSPSN16NOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold; WCS (metallized plastic) is available in Black, Gold and Silver. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA

WCSWCS AWC

RGK6016RC: size 16RGK6517RC: size 17

RGK6016RC: size 16RGK6517RC: size 17

RGK6016RC: size 16RGK6517RC: size 17

ORDER KIT SKSS16 or 17

Lgth = size 16: 58mm size 17: 62mmDia = size 16: 19 up to 23mm size 17: 19 up to 25mm

Lgth = size 16: 58mm size 17: 62mmDia = size 16: 19 up to 23mm size 17: 19 up to 25mm

Lgth = size 16: 58mm size 17: 62mmDia = size 16: 19 up to 22.8mm size 17: 19 up to 25.1mm

Lgth = sz16: 31mm sz17: 31mmDia = sz16: 18 up to 23mm sz17: 20 up to 24mm

REEL SEAT KIT INCLUDES: Spinning Body, Downlocking Graphite Hood & Nut and arbors for both pieces. Does NOT include WCS or AWC winding checks, speci�ed cork or EVA.

ORDER LIST1 ea...SKSS16 (or 17)

1 ea...RGSK6016RC or 6517RC (or E=EVA)

1 ea...BGK485RC or BGS65RC (or E=EVA)

2 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

3 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

SK2 SPINNING SPLIT GRIP DOWNLOCKING GRAPHITE HOOD/NUT NO FOREGRIP

WCSAWC

ORDER KIT SKSS16 or 17

REEL SEAT KIT INCLUDES: Spinning Body, Downlocking Graphite Hood & Nutm and arbors for both pieces. Does NOT include WCS or AWC winding checks, speci�ed cork or EVA.

ORDER LIST1 ea...SKSS16 (or 17)1 ea...RGSK6016RC or 6517RC (or E=EVA)

1 ea...BGK485RC or BGS65RC (or E=EVA)1 ea...NKC16RC or 17RC (or E=EVA)3 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

SK2 SPINNING SPLIT GRIP DOWNLOCKING GRAPHITE HOOD/NUT, “NUBBIN” FOREGRIP

SK2 SPINNING SPLIT GRIP DOWNLOCKING GRAPHITE HOOD/NUT, UNIVERSAL FOREGRIP

AWC

NKC16RC OR 17RC

WCS

AWC

ORDER KIT SKSS16 or 17

REEL SEAT KIT INCLUDES: Spinning Body, Downlocking Graphite Hood & Nut and arbors for both pieces. Does NOT include WCS or AWC winding checks, speci�ed cork or EVA.

ORDER LIST1ea...SKSS16 (or 17)

1 ea...RGSK6016RC or 6517RC

(or E=EVA)

1 ea...BGK485RC or BGS65RC

(or E=EVA)

1 ea...FGS2RC (or E=EVA)

3 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX:

AWC

FGS2RC

Lgth = 51mmDia = 25.5mm

PAGE 9

BGK485RC or BGS65RC (Extended)

BGK485RC or BGS65RC (Extended)

BGK485RC or BGS65RC (Extended)

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

NSA16 or 17 (included)

NSA16 or 17 (included)

NSA16 or 17 (included)

REF# RSK17

REF# RSK18

REF# RSK19

SK2: DOWNLOCKING Spinning Seat with Traditional Metal Hood Grip Con�gurationsThe following con�gurations show all metal hood combinations currently available for the SK2 Spinning Seat. All components are noted in the “ORDER LIST”. Append 16 or 17 at the end of each stock number to designate size: Ex: SKSPSN16NOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold; WCS (metallized plastic) is available in Black, Gold and Silver. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA

WCSWCS AWC

ORDER KIT SKSPSM16 or 17

PAGE 10

Lgth = size 16: 58mm size 17: 62mmDia = size 16: 19 up to 23mm size 17: 19 up to 25mm

Lgth = size 16: 58mm size 17: 62mmDia = size 16: 19 up to 23mm size 17: 19 up to 25mm

Lgth = size 16: 58mm size 17: 62mmDia = size 16: 19 up to 22.8mm size 17: 19 up to 25.1mm

Lgth = sz16: 31mm sz17: 31mmDia = sz16: 18 up to 23mm sz17: 20 up to 24mm

Lgth = 51.2mmDia = sz16: 19 up to 25.4mm

REEL SEAT KIT INCLUDES: Spinning Body, Uplocking Hidden Thread Hood and arbors for both pieces. Does NOT include WCS winding checks, speci�ed cork or EVA.

ORDER LIST1 ea...SKSPSM16 (or 17)

1 ea...RGK6016RC or RGK6517RC

1 ea...BGK485RC or BGS65RC

2 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

3 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

SK2 SPINNING SPLIT GRIP DOWNLOCKING METAL HOOD NO FOREGRIP

WCSAWC

ORDER KIT SKSPSM16 or 17

REEL SEAT KIT INCLUDES: Spinning Body, Uplocking Hidden Thread Hood and arbors for both pieces. Does NOT include WCS winding checks, speci�ed cork or EVA.

ORDER LIST1 ea...SKSPSM16 (or 17)

1 ea...RGK6016RC OR 6517RC

1 ea...BGK485RC or BGS65RC

1 ea...NKC16RC or 17RC

3 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

SK2 SPINNING SPLIT GRIP DOWNLOCKING METAL HOOD, “NUBBIN” FOREGRIP

SK2 SPINNING SPLIT GRIP DOWNLOCKING METAL HOOD, UNIVERSAL FOREGRIP

AWC

NKC16RC OR 17RC

FGS2RC

WCS

AWC

ORDER KIT SKSPSM16 or 17

REEL SEAT KIT INCLUDES: Spinning Body, Uplocking Hidden Thread Hood and arbors for both pieces. Does NOT include WCS winding checks, speci�ed cork or EVA.

ORDER LIST1ea...SKSPSM16 (or 17)

1 ea...RGK6016RC OR 6517RC

1 ea...BGK485RC or BGS65RC

1 ea...FGS2RC

3ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

2ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.

AWC

RGK6016RC: size 16RGK6517RC: size 17

RGK6016RC: size 16RGK6517RC: size 17

RGK6016RC: size 16RGK6517RC: size 17

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm

BGK485RC or BGS65RC (Extended)

BGK485RC or BGS65RC (Extended)

BGK485RC or BGS65RC (Extended)

NSA16 or 17 (included)

B or 17B GB or 17GB = Gunsmoke

B or 17B GB or 17GB = Gunsmoke

B or 17B GB or 17GB = Gunsmoke

NSA16 or 17 (included)

NSA16 or 17 (included)

REF# RSK20

REF# RSK21

REF# RSK22

VSS Spinning Reel Seats: DOWNLOCKING Spinning Seat with Traditional Metal Hood & Solid Grip Con�gurationsThe following con�gurations show all metal hood combinations currently available for the VSS Spinning Seat. All components are noted in the “ORDER LIST”. Append 16 or 17 at the end of each stock number to designate size: Ex: SKSPSN16NOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold; WCS (metallized plastic) is available in Black, Gold and Silver. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA

VSSM16 OR 17 (STANDARD)VSSD16 OR 17 (DELUXE)

VSSM16 = Frosted HoodVSSM16GB = Gunsmoke HoodVSSM16B = Black HoodVSSD16G = Gold Deluxe HoodVSSD16 = Silver Deluxe Hood

VSSM16 = Frosted HoodVSSM16GB = Gunsmoke HoodVSSM16B = Black HoodVSSD16G = Gold Deluxe HoodVSSD16 = Silver Deluxe Hood

VSSM16 = Frosted HoodVSSM16GB = Gunsmoke HoodVSSM16B = Black HoodVSSD16G = Gold Deluxe HoodVSSD16 = Silver Deluxe Hood

PAGE 11

Lgth = 9-inchesDia = size 16 approx 25mm size 17 approx 27mm

ORDER LIST1ea...VSSM(D)16 (or 17)

1 ea...BGV16 or 17C (or E=EVA)

1 ea...FBC2 (16) or RBC1620(16)

or 1720(17)

2 ea...NSA16 or 17

No winding check is available for this particular configuration

ORDER LIST1ea...VSSM(D)16 (or 17)

1 ea...BGV16 or 17C (or E=EVA)

1 ea...FGS2RC (16) or FGS25C (17) not available in EVA

1 ea...FBC2(16) or RBC1620(16) or 1720(17)

2 ea...NSA16 or 17

1 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

VSS SOLID GRIP DOWNLOCKING METAL HOOD NO FOREGRIP

AWC

VSS SOLID GRIP DOWNLOCKING METAL HOOD WITH UNIVERSAL FOREGRIP

VSS SOLID GRIP DOWNLOCKING METAL HOOD WITH “NUBBIN” FOREGRIP

AWC

BGV16C OR 17C

FBC2 (�ts 16): EVA (shown)or RBC1620 (�ts 16) or 1720 (�ts 17):Rubberized cork

FBC2 (�ts 16): EVA (shown)or RBC1620 (�ts 16) or 1720 (�ts 17):Rubberized cork

FBC2 (�ts 16): EVA (shown)or RBC1620 (�ts 16) or 1720 (�ts 17):Rubberized cork

VSSM16 OR 17 (STANDARD)VSSD16 OR 17 (DELUXE)

Lgth = 9-inchesDia = size 16 approx 25mm size 17 approx 27mm

BGV16C OR 17CFGS25C (standard, large)FGS2RC (rubberized cork)

Lgth = 51mmDia = 25.5mm

ORDER LIST1ea...VSSM(D)16 (or 17)

1 ea...BGV16 or 17C (or E=EVA)

1 ea...NKC16RC or 17RC

1 ea...FBC2(16) or RBC1620(16) or

1720(17)

2 ea...NSA16 or 17

1 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.

VSSM16 OR 17 (STANDARD)VSSD16 OR 17 (DELUXE)

Lgth = 9-inchesDia = size 16 approx 25mm size 17 approx 27mm

BGV16C OR 17C

All of the above con�gurations will accept Fuji’s newgraphite/nylon nut and hood. SOLD SEPARATELY. OrderPart SKSS16 (or 17)/ASH

NKC16RC OR 17RC

Lgth = sz16: 31mm sz17: 31mmDia = sz16: 18 up to 23mm sz17: 20 up to 24mm

NSA16 or 17

NSA16 or 17

NSA16 or 17

REF# RSK23

REF# RSK24

REF# RSK25

VSS Spinning R

ts: DOWNLeaeel SVSS Spinning R

OCKING Spinning Sts: DOWNL

eaOCKING Spinning S

GE 11 APPA

t with ea

t the end of the st a”” aC“er he lettTTE: NOW inding check A AWC (WTE: NO

t the end of each stppend 16 or 17 aAaon�gurwing collohe fT

aditional MrTVSS Spinning R

VSS SOLID GRIP DOWNLOCKING MET

VSSD16 OR 17 (DELVSSM16 OR 17 (ST

es a ctock number indicat the end of the stailable in Silvvluminum) is aed AnodizAWC (

nao desigock number tt the end of each sttions curombinaw all metal hood ctions shoa

etal Hood & Saditional Mts: DOWNLeaeel SVSS Spinning R

A IP DOWNLOCKING MET TAL HOOD NO FOREGRIP

UXE)VSSD16 OR 17 (DEL)ARDAND (ST TAND

tical paror iden f“E”” fe , substitutiprk gores a cWCS (metallizold; , Blue and Ged, Rerailable in Silv

e: Ex: SKSPSN16e siztnaVSS Spinning Sor the ailable fvtly aenrtions cur

on�gurip Colid Gretal Hood & SOCKING Spinning Sts: DOWNL

AL HOOD NO FOREGRIP

AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical par, Gailable in Blackved plastic) is aWCS (metalliz

ed in the e notts aromponenll c. AteaVSS Spinning S

tionsaon�gureaOCKING Spinning S

AL HOOD NO FOREGRIP C2 (� RBC

ubbeBGV16C OR 1

. erold and Silv, G

. ”ORDER LIST“ed in the

t with ea

kored cizRubberor RBC1620 (�ts 16) or 1720 (�ts 17):

wn)A (shoVVA (shoFBC2 (�ts 16): E

p gparticular configurationNo winding check is available for this

NSA16 or 172 ea...

or 1720(17)

FBC2 (16) or RBC1620(16) 1 ea...

(or E=EVBGV16 or 17C 1 ea...

VSSM(D)16 (or 17)1ea...

ORDER LIST

No winding check is available for this

20(1

A) EV A

VSSD16 = SilvVSSD16VSSM16VSSM16NSA16 or 17

e 17 appr size 16 apprDia = siz

e Hoodeluxer DVSSD16 = Silve Hoodeluxold D = GGVSSD16

= Black HoodBVSSM16 = Gunsmoke HoodGBVSSM16

x 27mmoe 17 apprx 25mmo 6 appr

REF# RSK23

VSS SOLID GRIP DOWNLOCKING MET

CAW

(or E=EVBGV16 or 17C 1 ea...

VSSM(D)16 (or 17)1ea...

C (rubberFGS2RFGS25C (standar

A IP DOWNLOCKING MET TAL HOOD WITH UNIVERSAL FOREGRIP

A) EV A

VSSD16 OR 17 (DELVSSM16 OR 17 (ST

Dia = 25.5mmLgth = 51mm

k)ored cizC (rubberge), lardFGS25C (standar

AL HOOD WITH UNIVERSAL FOREGRIP

UXE)VSSD16 OR 17 (DEL)ARDAND (ST TAND

BGV16C OR 17C

NSA16 or 17

e 17 appr size 16 apprDia = siz

BGV16C OR 17C

C2 (� RBC bbe

RSAL FOREGRIP

x 27mmoe 17 apprx 25mmoe 16 appr

kored cizRubberor RBC1620 (�ts 16) or 1720 (�ts 17):

wn)A (shoVVA (shoFBC2 (�ts 16): E

VSS SOLID GRIP DOWNLOCKING MET

.12.5mm I.DWC12.5B = Blue with 16.5mm) EX: Afrom 6.0 to

equal to diameter of blank in half mm increments Red,Blue,Silver or CAW1 ea...

NSA16 or 172 ea...

FBC2(16) or RBC1620(16) or 1720(17)1 ea...

Aavailable in EVFGS2RC (16) or FGS25C (17) not1 ea...

(or E=EVBGV16 or 17C 1 ea...

A IP DOWNLOCKING MET TAL HOOD WITH “NUBBIN” FOREGRIP

WC12.5B = Blue with equal to diameter of blank in half mm increments

Gold (order I.D. Red,Blue,Silver or

FBC2(16) or RBC1620(16) or 1720(17)

FGS2RC (16) or FGS25C (17) not

A) EV A

VSSD16 = SilvVSSD16VSSM16VSSM16VSSM16 = F

AL HOOD WITH “NUBBIN” FOREGRIP

e Hoodeluxer DVSSD16 = Silve Hoodeluxold D = GGVSSD16

= Black HoodBVSSM16 = Gunsmoke HoodGBVSSM16

ed HoodostrVSSM16 = F

AL HOOD WITH “NUBBIN” FOREGRIP

REF# RSK24

VSS SOLID GRIP DOWNLOCKING MET

CAW

VSSM(D)16 (or 17)1ea...

ORDER LIST

C OR 17RC16RNK

A IP DOWNLOCKING MET TAL HOOD WITH “NUBBIN” FOREGRIP

VSSD16 OR 17 (DELVSSM16 OR 17 (ST

o 23mmDia = sz16: 18 up t sz17: 31mmLgth = sz16: 31mm

CC OR 17R

AL HOOD WITH “NUBBIN” FOREGRIP

UXE)VSSD16 OR 17 (DEL)ARDAND (ST TAND

BGV16C OR 17C

NSA16 or 17

iz

e 17 appr size 16 apprDia = siz

BGV16C OR 17C

NSA16 or 17

C2 (�ts RBC16 bber

N” FOREGRIP

kored cor RBC1620 (�ts 16) or 1720 (�ts 17):

wn)A (shoVVA (shoFBC2 (�ts 16): E

x 27mmoe 17 apprx 25mmo r

WC12.5B = Blue with 12.5mm AAWC12.5B = Blue with 12.5mm I.D16.5mm) EX: increments from 6.0 to

I.D. equal to diameter of blank in half mm Gold (order Red,Blue,Silver or CAW1 ea...

NSA16 or 172 ea...

1720(17)

FBC2(16) or RBC1620(16) or 1 ea...

NKC16RC or 17RC1 ea...

(or E=EVBGV16 or 17C 1 ea...

er DVSSD16 = Silvold D = GGVSSD16

= Black HoodBVSSM16 = Gunsmoke HoodGBVSSM16

ostrVSSM16 = F

.WC12.5B = Blue with 12.5mm I.D16.5mm) EX:

I.D. equal to diameter of blank in half mm Gold (order

FBC2(16) or RBC1620(16) or

A) V VA) o 24mm sz17: 20 up t

e Hoodeluxer De Hoodeluxold D

= Black Hood = Gunsmoke Hood

ed Hoodost

t SKSS16 (or 17)/ASH arPylon nut and hoode/naphitrg

ll of the aboA

NSA16 or 17

(or 17)/ASH . OYY. OrTELLYAATELAR. SOLD SEPon nut and hood

s new’ujiept Fctions will acaon�gure cvll of the abo

NSA16 or 17

der. Ors new

VSS Spinning Reel Seats: DOWNLOCKING Spinning Seat with Traditional Metal Hood & Split Grip Con�gurationsThe following con�gurations show split grip con�gurations for VSS reel SeatsNOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold in half mm ID increments from 6.0 to 16.5mm; WCS (metallized plastic) is available in Black, Gold and Silver in half mm ID increments from 7.0 to 16.0mm. NOTE: The letter “C” or “RC” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA

VSSM16 (STANDARD)VSSD16 (DELUXE)

HOOD COLOR LIST FORABOVE CONFIGURATIONS

PAGE 12

Lgth = 3.75-inchesDia = approx 23mm

ORDER LIST1ea...VSSM(D)16

1 ea...FGV16RC or 17RC (or E=EVA)

1 ea...BGK485RC

2 ea...NSA16 or 17

2 ea...AWC (see NOTE above)

1 ea...WCS (see note above)

ORDER LISTADD 1ea...FGS2RC Foregrip and 1 ea AWC winding check to above ORDER LIST

VSS SIZE 16 SPLIT GRIP DOWNLOCKING METAL HOOD NO FOREGRIP

VSS SIZE 16 SPLIT GRIP DOWNLOCKING METAL HOOD WITH UNIVERSAL FOREGRIP

VSS SIZE 17 SPLIT GRIP DOWNLOCKING METAL HOOD WITH NO FOREGRIP

AWC

VSS SIZE 17 SPLIT GRIP DOWNLOCKING METAL HOOD WITH UNIVERSAL FOREGRIP

FGV16RC

FGV16RC VSSM16 (STANDARD)VSSD16 (DELUXE)

Lgth = 3.75-inchesDia = approx 23mm

Lgth = 51mmDia = 25.5mm

Lgth = 51mmDia = 25.5mm

ORDER LIST1ea...VSSM(D)17

1 ea...BGV17RC (or E=EVA)

1 ea...BGS65RC

2 ea...AWC (see NOTE above)

2 ea...NSA17

VSSM17 (STANDARD)VSSD17 (DELUXE) Lgth = 4.25-inches

Dia = approx 27mm

Lgth = 2.5-inchesDia = approx 28mm

FGV17RC

(See available hood colors below)

(See available hood colors below)

(See available hood colors below)

(See available hood colors below)

All of the above con�gurations will accept Fuji’sgraphite/nylon nut and hood. SOLD SEPARATELY. Order Part SKSS16 (or 17)/ASH

All of the above con�gurations will accept Fuji’s new“Nubbin’” Foregrip. Order in size 16 or 17.

NK16RC OR 17RC

BGK485RC

BGK485RC

Lgth = 2 inDia = approx 28mm

Lgth = 2 inDia = approx 28mm

AWC

AWC

AWC

FGS2RC

VSSM17 (STANDARD)VSSD17 (DELUXE)

Lgth = 4.25-inchesDia = approx 27mm

Lgth = 2.5-inchesDia = approx 28mm

FGV17RC

AWC

AWC FGS2RC

ORDER LISTADD 1ea...FGS2RC Foregrip and 1 ea AWC winding check to above ORDER LIST

BGS65RC

BGS65RC

NSA16

NSA16

NSA17

NSA17

REF# RSK26

REF# RSK27

REF# RSK28

REF# RSK29

VSSM16 = Frosted HoodVSSM16GB = Gunsmoke HoodVSSM16B = Black HoodVSSD16G = Gold Deluxe HoodVSSD16 = Silver Deluxe Hood

WCS

VSS Spinning Reel Seats: DOWNLOCKING Spinning Seat with HIDDEN THREADS. Solid & Split GripThe following con�gurations show hidden thread con�gurations for VSS reel SeatsNOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold in half mm ID increments from 6.0 to 16.5mm; WCS (metallized plastic) is available in Black, Gold and Silver in half mm ID increments from 7.0 to 16.0mm. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA

VSSM16 (STANDARD)VSSD16 (DELUXE)

PAGE 13

ORDER LIST1ea...VSSM(D)16 or 17

1 ea...KDPS16 or 17 (+hood color)

1 ea...FGK25RC (16) or 27RC (17)

1 ea...BGV16 or 17

2 ea...NSA16 or 17

1 ea...FBC2(16) or RBC1620(16) or

1720(17)

ORDER LIST1ea...VSSM(D)16 or 17

1 ea...KDPS16 or 17 (+hood color)

1 ea...FGK25RC (16) or 27RC (17)

1 ea...FGV16RC or 17RC

1 ea...BGK485RC (16) OR

BGS65RC (17)

2 ea...NSA16 or 17

2 ea...AWC of proper size

ORDER LIST1ea...VSSM(D)16 or 17

1 ea...HPS16 or 17

1 ea...FGH25C (16) or 27C (17)

1 ea...BGV16 or 17

2 ea...NSA16 or 17

1 ea...FBC2(16) or RBC1620(16) or

1720(17)

ORDER LIST1ea...VSSM(D)16 or 17

1 ea...HPS16 or 17

1 ea...FGH25C (16) or 27C (17)

1 ea...FGV16RC or 17RC

1 ea...BGK485RC (16) OR

BGS65RC (17)

2 ea...NSA16 or 17

2 ea...AWC of proper size

VSS SOLID GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOOD

VSS SPLIT GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOOD 16 OR 17

VSS SOLID GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD

VSS SPLIT GRIP HPS “HIDDEN” THREAD HOOD 16 OR 17

BGV16 OR 17

BGV16 or 17 VSSM16 (STANDARD)VSSD16 (DELUXE)

VSSM17 (STANDARD)VSSD17 (DELUXE)

Lgth = 4.25-inchesDia = approx 27mm

Lgth = 2.5-inchesDia = approx 28mm

FGV16RC or 17RCBGK485RC (for 16)BGS65RC (for 17) (shown)

BGK485RC (for 16)BGS65RC (for 17) (shown)

AWC

VSSM17 (STANDARD)VSSD17 (DELUXE)

Lgth = 4.25-inchesDia = approx 27mm

Lgth = 2.5-inchesDia = approx 28mm

FGV16RC or 17RC

AWC

HPS16 or 17FGH25C (16)FGH27C (17)

FGK25RC (16)FGK27RC (17)

KDPS16 or 17

FGK25RC (16)FGK27RC (17)

KDPS16 or 17

HPS16 or 17FGH25C (16)FGH27C (17)

Lgth = 9-inchesDia = size 16 approx 25mm size 17 approx 27mm

Lgth = 2.25-in (16); 2.5-in (17)Dia = 26mm (16); 28mm (17)

Lgth = 2.5-in (16); 2.75-in (17)Dia = 28mm (16); 30mm (17)

Lgth = 2.5-in (16); 2.75-in (17)Dia = 28mm (16); 30mm (17)

Lgth = 2.25-in (16); 2.5-in (17)Dia = 26mm (16); 28mm (17)

Lgth = 9-inchesDia = size 16 approx 25mm size 17 approx 27mm

NSA16 or 17

NSA16 or 17

NSA16 or 17

NSA16 or 17

FBC2 (�ts 16): EVA (shown)or RBC1620 (�ts 16) or 1720 (�ts 17):Rubberized cork

FBC2 (�ts 16): EVA (shown)or RBC1620 (�ts 16) or 1720 (�ts 17):Rubberized cork

B GBASH (or 17) = Gunsmoke Hood

B GBASH (or 17) = Gunsmoke Hood

REF# RSK30

REF# RSK31

REF# RSK29

REF# RSK32

VSS Spinning R ts: DOWNLeaeel SVSS Spinning R OCKING Spinning Sts: DOWNL eaOCKING Spinning S

GE 13 APPA

t with ea

t the end of the st a”” aC“er he lettTTE: NOailable in Blackvplastic) is a

W inding check A AWC (WTE: NOaon�gurwing collohe fT

THREADS. SHIDDEN VSS Spinning R

VSS SOLID GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOOD

VSSM(D)16 or 171ea...

ORDER LIST

es a ctock number indicat the end of the ster in half mm ID incrold and Silv, Gailable in Black

ailable in Silvvluminum) is aed AnodizAWC (tions faon�guread cw hidden thrtions shoa

olid & Split GrTHREADS. Sts: DOWNLeaeel SVSS Spinning R

VSS SOLID GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOODC (16)FGK25R )ARDANDVSSM16 (ST TAND

tical paror iden f“E”” fe , substitutiprk gores a co 16.0mm. om 7.0 tts fremener in half mm ID incr

old in half mm ID incr, Blue and Ged, Rerailable in Silvtseaeel SVSS ror tions f

ipolid & Split GrOCKING Spinning Sts: DOWNL

VSS SOLID GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOOD

AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical par

o 16.5mm; om 6.0 tts fremenold in half mm ID incr

eaOCKING Spinning S

AL HOOD RBC162 C2 (�ts

ed WCS (metallizo 16.5mm;

t with ea

or RBC1620 (�ts 16) or 1720 (�ts 17):wn)A (shoVVA (shoFBC2 (�ts 16): E

VSS SOLID GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD

1720(17)

FBC2(16) or RBC1620(16) or 1 ea...

NSA16 or 172 ea...

BGV16 or 171 ea...

FGK25RC (16) or 27RC (17)1 ea...

KDPS16 or 17 (+hood color)1 ea...

VSSM(D)16 or 17

FGH25C (16)

VSS SOLID GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD

FBC2(16) or RBC1620(16) or

FGK25RC (16) or 27RC (17)

KDPS16 or 17 (+hood color)

HPS16 or 17FGH25C (16)

(16); 28mm (17)

VSS SOLID GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD

UXE)VSSD16 (DEL)ARDANDVSSM16 (ST TAND

NSA16 or 17

B

VSS SOLID GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOODBGV16 or 17

x 27mmoe 17 appr siz

NSA16 or 17

ASH (or 17) = Gunsmoke HoodGB

VSS SOLID GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD

REF# RSK30

ASH (or 17) = Gunsmoke Hood

1720(17)

FBC2(16) or RBC1620(16) or 1 ea...

NSA16 or 172 ea...

BGV16 or 171 ea...

FGH25C (16) or 27C (17)1 ea...

HPS16 or 17 1 ea...

VSSM(D)16 or 171ea...

ORDER LIST

FGH27C (17)

FBC2(16) or RBC1620(16) or

FGH25C (16) or 27C (17)

FGH27C (17)

Dia = 28mm (16); 30mm (17)

UXE)VSSD16 (DEL

NSA16 or 17SA16 or 17

ed cizubberr RBC162 BC2 (�ts

REF# RSK31kored c

or RBC1620 (�ts 16) or 1720 (�ts 17):wn)A (shoVVA (shoFBC2 (�ts 16): E

VSS SPLIT GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOOD 16 OR 17

BGS65RC (17)

BGK485RC (16) OR1 ea...

FGV16RC or 17RC1 ea...

FGK25RC (16) or 27RC (17)1 ea...

KDPS16 or 17 (+hood color)1 ea...

VSSM(D)16 or 171ea...

ORDER LIST

VSS SPLIT GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOOD 16 OR 17

FGK25RC (16) or 27RC (17)

KDPS16 or 17 (+hood color)

KDPS16 or 17C (17)FGK27RC (16)FGK25R

Dia = 26mm (16); 28mm (17)

VSS SPLIT GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOOD 16 OR 17

UXE)VSSD17 (DELARDANDVSSM17 (ST TAND

KDPS16 or 17

VSS SPLIT GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOOD 16 OR 17)ARD

CC or 17RFGV16R

pp

wn)or 17) (shoC (fBGS65Ror 16)C (fBGK485R

VSS SPLIT GRIP HPS “HIDDEN” THREAD HOOD 16 OR 17

VSSM(D)16 or 171ea...

ORDER LIST

WC of proper sizeA2 ea...

NSA16 or 172 ea...

FGH27C (17)FGH25C (16)

VSS SPLIT GRIP HPS “HIDDEN” THREAD HOOD 16 OR 17

HPS16 or 17FGH27C (17)FGH25C (16)

VSS SPLIT GRIP HPS “HIDDEN” THREAD HOOD 16 OR 17

UXE)VSSD17 (DEL)ARDANDVSSM17 (ST TAND

NSA16 or 17

B

BGS65RBGK485R

CC or 17RFGV16R

NSA16 or 17

ASH (or 17) = Gunsmoke HoodGB

wn)or 17) (shoC (fBGS65Ror 16)C (fBGK485R

REF# RSK29

ASH (or 17) = Gunsmoke Hood

WC of proper sizeA2 ea...

NSA16 or 172 ea...

BGS65RC (17)

BGK485RC (16) OR1 ea...

FGV16RC or 17RC1 ea...

FGH25C (16) or 27C (17)1 ea...

HPS16 or 17 1 ea...

VSSM(D)16 or 171ea...

FGH25C (16) or 27C (17)

Dia = 28mm (16); 30mm (17) Dia = a

NSA16 or 17

x 27mmo appr CAW

NSA16 or 17

x 28mmoDia = appr

REF# RSK32

NPS Spinning Reel Seats: UPLOCKING Low Pro�le Spinning NPS is a low pro�le seat that is primarilty an uplocking seat due to the narrow fore grip portion. We suggest a thread or epoxy ramp or ciustom winding check for these seats. Available in sizes 16, 18 and 20NOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold in half mm ID increments from 6.0 to 16.5mm; WCS (metallized plastic) is available in Black, Gold and Silver in half mm ID increments from 7.0 to 16.0mm. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA

DNPSM16, 18 OR 20 (STANDARD)DNPSSD16, 18 OR 20 (DELUXE)

DNPSM16 (STANDARD)DNPSSD16 (DELUXE)

DNPSM16GB B

KDPS16ASH = Frosted Hood GB B = Black Hood

PAGE 14

ORDER LIST1ea...DNPSM (orDNPSSD) size

16, 18 or 20

1 ea...FGS2RC

1 ea...BGK485RC or BGS65RC

2 ea...NSA16 18 or 20

ORDER LIST1ea...DNPSM (orDNPSSD) size 16

1 ea...KDPS16ASH

1 ea...FGK25RC (16)

1 ea...BGK485RC

2 ea...NSA16

1 ea...AWC

ORDER LIST1ea...DNPSM (orDNPSSD) size 16

1 ea...KSKSS16ASH

1 ea...BGKS16RC (16)

1 ea...BGK485RC

2 ea...NSA16

1 ea...AWC

ORDER LIST1ea...DNPSM (orDNPSSD) size 16

1 ea...HPS16

1 ea...FGH25RC (16)

1 ea...BGK485RC

2 ea...NSA16

1 ea...AWC

NPS SPLIT GRIP WITH TRADITIONAL METAL HOOD SIZE 16, 18 OR 20

NPS SPLIT GRIP WITH KDPS HIDDEN THREAD HOOD, SIZE 16 ONLY

NPS SPLIT GRIP WITH KSKSS16ASH HIDDEN THREAD GRAPHITE HOOD, SIZE 16 ONLY

NPS SPLIT GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD, 16 ONLY

FGS2RC

Lgth = 2.5-inchesDia = approx 28mm

BGK485RC

AWC

Lgth = 2.5-inchesDia = approx 28mmAWC

HPS16

Lgth = 2-inches Dia = 25.5mm

BGK485RC

BGK485RC

Use BGS65RC for size 20

AWC

AWC

Lgth = 48.6mmDia = approx 28mm

Lgth = 2 inchesDia = approx 28mm

FGK25RC (16)KDPS16ASH

DNPSM16 (STANDARD)DNPSSD16 (DELUXE)

DNPSM16 (STANDARD)DNPSSD16 (DELUXE)

BGK485RCBGKS16RC

FGH25RC

KSKSS16ASH

Lgth = 2.25-in (16); 2.5-in (17)Dia = 26mm (16); 28mm (17)

BGS65RC: Lgth = 2.5-inchesDia = approx 28mm

Lgth = 1.65 in (16), 1.75in (17)Dia = 26mm (16), 28mm (17)

Lgth = 2.5-in (16)Dia = 28mm (16)

NSA16, 18 or 20

NSA16

NSA16

NSA16

REF# RSK33

REF# RSK34

REF# RSK35

REF# RSK36

GE 14 AP

NPS Spinning R ts: UPLeaeel SNPS Spinning R OCKING Lts: UPL o�le Spinning rw Po o�le Spinning

t the end of the st a”” aC“er he lettTTE: NOailable in Blackvplastic) is a

inding check AWTE: NOailable in sizv. A vtsor these seaf

t thao�le seaw prNPS is a lo

NPS Spinning R

NPS SPLIT GRIP WITH TRADITIONAL MET

DNPSM (orDNPSSD) size1ea...

ORDER LISTDNPSSD16, 18 OR 20 (DELDNPSM16, 18 OR 20 (ST

es a ctock number indicat the end of the ster in half mm ID incrold and Silv, Gailable in Black

ailable in Silvvluminum) is aed AnodizAWC ( AWC (es 16, 18 and 20ailable in siz

t due ting seay an uplockiltimart is prt tha

ts: UPLeaeel SNPS Spinning R

NPS SPLIT GRIP WITH TRADITIONAL MET

DNPSM (orDNPSSD) sizeUXE) DEL

)ARDAND ST TAND

tical paror iden f“E”” fe , substitutiprk gores a co 16.0mm. om 7.0 tts fremener in half mm ID incr

old in half mm ID incr, Blue and Ged, Rerr, Railable in Silv

Wtion. ip porre gorw foro the nart due t

OCKING Lts: UPL

AL HOOD SIZE 16, 1 MET TAL HOOD SIZE 16, 18 OR 20

AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical par

o 16.5mm; om 6.0 tts fremenold in half mm ID incr

amp or ciusty rxead or epoe suggest a thr

o�le Spinning rw Po

AL HOOD SIZE 16, 18 OR 20C FGS2R se BGS65RU

BGK485R

ed WCS (metallizo 16.5mm;

om winding check amp or ciust

o�le Spinning

e 20or sizC fse BGS65RCBGK485R

REF# RSK33

NPS SPLIT GRIP WITH KDPS HIDDEN THREAD HOOD, SIZE 16 ONL

ORDER LIST

NSA16 18 or 202 ea...

BGK485RC or BGS65RC1 ea...

FGS2RC1 ea...

16, 18 or 20

DNPSM (orDNPSSD) size

GBDNPSM16

NPS SPLIT GRIP WITH KDPS HIDDEN THREAD HOOD, SIZE 16 ONL

BGK485RC or BGS65RC

B

NPS SPLIT GRIP WITH KDPS HIDDEN THREAD HOOD, SIZE 16 ONL

NSA16, 18 or 20

Y 6 ONL LY

CAWDia = 25.5mmLgth = 2-inches

C (16)FGK25R C BGK485R

x 28mmoDia = apprLgth = 48.6mm

REF# RSK34

CAW1 ea...

NSA162 ea...

BGK485RC1 ea...

FGK25RC (16)1 ea...

KDPS16ASH1 ea...

DNPSM (orDNPSSD) size 161ea...

ORDER LIST

ed Hood ostrKDPS16ASH = F

DNPSSD16 (DELDNPSM16 (ST

DNPSM (orDNPSSD) size 16

GB

UXE)DNPSSD16 (DEL)ARDAND16 (ST TAND KDPS16ASH

Dia = 26mm (16); 28mm (17)Lgth = 2.25-in (16); 2.5-in (17)

NSA16

= Black HoodB

CAW

C (16)FGK25R

Dia = 26mm (16); 28mm (17)Lgth = 2.25-in (16); 2.5-in (17)

C BGK485R

x 28mmoDia = apprLgth = 2 inches

x 28mmoDia = apprC: Lgth = 2.5-inchesBGS65R

NPS SPLIT GRIP WITH KSKSS16ASH HIDDEN THREAD GRAPHITE HOOD, SIZE 16 ONL

CAW1 ea...

NSA162 ea...

BGK485RC1 ea...

BGKS16RC (16) 1 ea...

KSKSS16ASH1 ea...

DNPSM (orDNPSSD) size 161ea...

ORDER LIST

NPS SPLIT GRIP WITH KSKSS16ASH HIDDEN THREAD GRAPHITE HOOD, SIZE 16 ONL

DNPSM (orDNPSSD) size 16DNPSM16 (ST

NPS SPLIT GRIP WITH KSKSS16ASH HIDDEN THREAD GRAPHITE HOOD, SIZE 16 ONL

)ARDAND16 (ST TAND KSKSS16ASH

NPS SPLIT GRIP WITH KSKSS16ASH HIDDEN THREAD GRAPHITE HOOD, SIZE 16 ONLCBGKS16R

Y L LYCBGK485R

NPS SPLIT GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD, 16 ONL

FGH25RC (16) 1 ea...

HPS161 ea...

DNPSM (orDNPSSD) size 161ea...

ORDER LIST

NPS SPLIT GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD, 16 ONL

DNPSM (orDNPSSD) size 16DNPSSD16 (DELDNPSM16 (ST

NPS SPLIT GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD, 16 ONLHPS16

UXE)DNPSSD16 (DEL)ARDANDM16 (ST TAND

Dia

NSA16

NPS SPLIT GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD, 16 ONL

CFGH25R

26mm (16), 28mm (17)

Y NG HOOD, 16 ONL LY

CBGK485R

REF# RSK35

CAW1 ea...

NSA162 ea...

BGK485RC1 ea...

FGH25RC (16) 1 ea...

Dia = 28mm (16)Lgth = 2.5-in (16)

NSA16

CAWDia = 28mm (16)Lgth = 2.5-in (16)

x 28mmoDia = apprLgth = 2.5-inches

REF# RSK36

DPS Spinning Reel Seats: DOWNLOCKING Spinning DPS is an extremely versatile, usually downlocking seat, perfect for custom turned handles. Available in sizes 16, 17, 18, 20, 22, 24, and 26. Our cork/EVA selection will not be su�cient for sizes above 20 DPS seats.NOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold in half mm ID increments from 6.0 to 16.5mm; WCS (metallized plastic) is available in Black, Gold and Silver in half mm ID increments from 7.0 to 16.0mm. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA

DPSM16, 17, 18 or 20 (STANDARD)DPSSD16, 17, 18 or 20 (DELUXE)

DNPSM16 or 17 (STANDARD)DNPSSD16 or 17 (DELUXE)

DPSM16GB B DPSSD16G

DPSM16GB B DPSSD16G

PAGE 15

ORDER LIST1ea...DPSM (or DPSSD) size 16, 18 or 20 / 1 ea...FGS25C / 1 ea...BGD95C / 1 ea...RBC1720 / 1 ea...AWC / 2 ea...NSA16 or 17

ORDER LIST1ea...DPSM (orDPSSD) size 16 or 17 / 1 ea...HPS16 or 17 / 1 ea...FGH25C or 27C / 1 ea...BGD95C / 1 ea...RBC1720 / 2 ea...NSA16 or 17

ORDER LIST1ea...DPSM (or DPSSD) size 16 or 17 / 1 ea...KDPS16 or 17 / 1 ea...FGK25RC or 27RC / 1 ea...BGD95C / 1 ea...RBC1720 / 2 ea...NSA16 or 17

DPSM16GB (with KDPS16GBASH) B (with KDPS16BASH) = Black Hood

DPS GRIP WITH TRADITIONAL METAL HOOD AND UNIVERSAL FOREGRIP, SIZE 16, 17, 18 or 20

DPS GRIP WITH HPS HIDDEN THREAD HOOD AND FOREGRIP, SIZE 16 OR 17

DPS GRIP WITH KDPS HIDDEN THREAD TRADITIONAL METAL HOOD AND FOREGRIP, SIZE 16 or 17

BGD95C (9-inch)

BGD95C (9-inch)

Lgth = 9-inchesDia = 25.5mm (smallest)

Lgth = 9-inchesDia = 25.5mm (smallest)

RBC1720

RBC1720

AWC

HPS16 or 17

FGH25C (16)FGH27C (17)(cork only)

DNPSM16 or 17 (STANDARD)DNPSSD16 or 17 (DELUXE)

BGD95C (9-inch) RBC1720

KDPS16 or 17

FGK25RC (16)FGK27RC (17)(cork only)

FGS25C (for 16 or 18) (cork only)

NSA16, 17, 18 or 20

NSA16 or 17

NSA16 or 17

REF# RSK37

REF# RSK38

REF# RSK39

ACSM Casting Reel Seats: DOWNLOCKING Solid Grip ACSM is an extremely versatile, downlocking casting seat, built for direct blank contact by the angler for added sensitivity. Available in sizes 16 and 17, For proper �t, order the model that matches the diameter of your blank at the point where the reel seat will be positioned. Sizes range from 9.5 mm to 15 mmNOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold in half mm ID increments from 6.0 to 16.5mm; WCS (metallized plastic) is available in Black, Gold and Silver in half mm ID increments from 7.0 to 16.0mm. See catalog for color and size indication. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVANOTE: ACSM SEATS USE NO ARBORS AND MUST BE SIZED TO THE BLANK DIAMETER. PLEASE REFER TO PAGE 49 OF OUR CATALOG FOR SIZING INFORMATION

ACSM (16 or 17 see catalog)

ACSM16GB B = Black Hood

PAGE 16

ORDER LIST1ea...ACSM size 16 or 17

1 ea...BGA9C or 11C

1 ea..RBC1720

Add Universal ForegripFGS25C or withrubberized corkFGS25RC

ACSM SOLID GRIP WITH TRADITIONAL METAL HOOD AND NO FOREGRIP 16 or 17BGA9C (9-inch)BGA11C (11-inch)

Dia = 25.5mm (smallest)

RBC1720

Requires Custom Winding Check

ACSM16B or 17B

ACSM16GB B = Black Hood

KDPS16/17GBASH BASH = Black Hood

ORDER LIST1ea...ACSM16B or 17B1ea...SKSS16(or 17)/ASH1 ea...BGA9C or 11C1 ea..RBC1720Add Universal ForegripFGS25C or withrubberized corkFGS25RC

ACSM SOLID GRIP WITH GRAPHITE/NYLON HOOD AND NO FOREGRIP 16 or 17BGA9C (9-inch)BGA11C (11-inch)

SKSS16 (or 17)/ASH

Dia = 25.5mm (smallest)

RBC1720

Requires Custom Winding Check

ACSM16B or 17B ORDER LIST1ea...ACSM16B or 17B

1ea...KSKSS16(or 17)/ASH

1 ea...BGKS16(0r 17)RC

1 ea...BGA9C or 11C

1 ea..RBC1720

ACSM SOLID GRIP WITH HIDDEN THREAD GRAPHITE/NYLON HOOD AND FOREGRIP 16 or 17BGA9C (9-inch)BGA11C (11-inch)

KSKSS16(or 17)/ASH

BGKS16(or 17)RC

Dia = 25.5mm (smallest)

RBC1720

ACSM16B or 17B ORDER LIST1ea...ACSM16B or 17B

1ea...KDPS16(or 17)

1 ea...BGK25(or 27)RC

1 ea...BGA9C or 11C

1 ea..RBC1720

ACSM SOLID GRIP WITH KDPS HOOD AND FOREGRIP 16 or 17BGA9C (9-inch)BGA11C (11-inch)

KDPS16(or 17)

BGK25RC (size 16)BGK27RC (size 17)

Dia = 25.5mm (smallest)

RBC1720

ACSM16B or 17B ORDER LIST1ea...ACSM16B or 17B

1ea...HPS16(or 17)

1 ea...FGH25(or 27)C

1 ea...BGA9C or 11C

1 ea..RBC1720

ACSM SOLID GRIP WITH HPS HOOD AND FOREGRIP 16 or 17BGA9C (9-inch)BGA11C (11-inch)

HPS16(or 17)

FGH25C (size 16)FGH27C (size 17)

Dia = 25.5mm (smallest)

RBC1720

Add Universal Foregrip FGS25C or FGS25RC with rubberized cork

Add Universal Foregrip FGS25C or FGS25RC with rubberized cork

REF# RSK40

REF# RSK41

REF# RSK42

REF# RSK43

REF# RSK44

GE 16 AP

asting RCSM CA

ts: DOWNLeaeel Sasting R

OCKING Sts: DOWNL

ip olid GrOCKING S

S USE NO ARBORS AND MUST BE SIZED TCSM SEA ATTE: ANOt the end of the st a”” aC“er he lettTTE: NO

ailable in Blackvplastic) is ainding check AWTE: NO

del thader the mo, orer �toppremely vtrxCSM is an eA

asting RCSM CA

ACSM SOLID GRIP WITH TRADITIONAL MET

ACSM size 16 or 171ea...

ORDER LIST

O TS USE NO ARBORS AND MUST BE SIZED es a ctock number indicat the end of the st

er in half mm ID incrold and Silv, Gailable in Blackailable in Silvvluminum) is aed AnodizAWC ( AWC (our blank aer of yches the diamettt madel tha

, built fting casting seawnlock, dotileersa

ts: DOWNLeaeel Sasting R

ACSM SOLID GRIP WITH TRADITIONAL MET

FGS25RC with rubberized corkAdd Universal Foregrip FGS25C or

talog)CSM (16 or 17 see caA

TER. PLEASE REFER METHE BLANK DIAO tical paror iden f“E”” fe , substitutiprk gores a c

talog fee cao 16.0mm. Som 7.0 tts fremener in half mm ID incrold in half mm ID incr, Blue and Ged, Rerr, Railable in Silv

t will beel seae the rt wheroint the pour blank ay the angler ft btacont blank cecor dir, built f

OCKING Sts: DOWNL

AL HOOD AND NO L MET TAL HOOD AND NO FOREGRIP 16 or 17

OG FOR SIZING INFORMALTTALAATGE 49 OF OUR CAO PTTER. PLEASE REFER AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical par

tion. e indicaolor and sizor ctalog fo 16.5mm; om 6.0 tts fremenold in half mm ID incr

om 9.5 mm tange fres r. Sizositionede pt will bailable in sizv. Ayor added sensitivity the angler f

ip olid GrOCKING S

BGA11C (11-inch) BGA9C (9-inch)

AL HOOD AND NO FOREGRIP 16 or 17

TION AATION OG FOR SIZING INFORM

ed WCS (metallizo 16.5mm; o 15 mmom 9.5 mm t

or Fes 16 and 17, ailable in siz

RBC1720

FGS25RCrubberized corkFGS25C Add Univ

RB1 ea..

BG 1 ea...

ACSM SOLID GRIP WITH GRAPHITE/NYLON HOOD AND NO FOREGRIP 16 or 17

ACSM16B or 17B1ea...

ORDER LIST

ACSM SOLID GRIP WITH GRAPHITE/NYLON HOOD AND NO FOREGRIP 16 or 17SKSS16 (or 17)/ASH

GBCSM16A

CSM16B or 17B A

ACSM SOLID GRIP WITH GRAPHITE/NYLON HOOD AND NO FOREGRIP 16 or 17

= Black HoodB

BGA11C (11-inch) BGA9C (9-inch)

ACSM SOLID GRIP WITH GRAPHITE/NYLON HOOD AND NO FOREGRIP 16 or 17

RBC1720

REF# RSK40

FGS25RCrubberized corkFGS25C or withAdd Universal Foregrip

RBC17201 ea..BGA9C or 11C1 ea...SKSS16(or 17)/ASH1ea...ACSM16B or 17B1ea...

ACSM SOLID GRIP WITH HIDDEN THREAD GRAPHITE/NYLON HOOD AND FOREGRIP 16 or 17ORDER LIST

in WeqR

ACSM SOLID GRIP WITH HIDDEN THREAD GRAPHITE/NYLON HOOD AND FOREGRIP 16 or 17KSKSS16(or 17)/ASH

GBCSM16 A

CSM16B or 17B A

ACSM SOLID GRIP WITH HIDDEN THREAD GRAPHITE/NYLON HOOD AND FOREGRIP 16 or 17KSKSS16(or 17)/ASH

FGS25RC with rubberized cork

= Black HoodB

BGA11C (11-inch)

BGA9C (9-inch)

ACSM SOLID GRIP WITH HIDDEN THREAD GRAPHITE/NYLON HOOD AND FOREGRIP 16 or 17

ubberized cork

ACSM SOLID GRIP WITH HIDDEN THREAD GRAPHITE/NYLON HOOD AND FOREGRIP 16 or 17RBC1720

REF# RSK41

RBC17201 ea..

BGA9C or 11C1 ea...

BGKS16(0r 17)RC1 ea...

SKSS16(or 17)/ASH1ea...K

ACSM16B or 17B1ea...

ORDER LIST

ACSM SOLID GRIP WITH KDPS HOOD AND FOREGRIP 16 or 17ORDER LIST

( )

KSKSS16(or 17)/ASH

ACSM SOLID GRIP WITH KDPS HOOD AND FOREGRIP 16 or 17KDPS16(or 17)

CSM16B or 17B AKSKSS16(or 17)/ASH

CSM16B or 17B A

ACSM SOLID GRIP WITH KDPS HOOD AND FOREGRIP 16 or 17

BGA9C (9-inch)

BGA9C (9-inch)

ACSM SOLID GRIP WITH KDPS HOOD AND FOREGRIP 16 or 17

RBC1720

RBC1720

REF# RSK42

RBC17201 ea..

BGA9C or 11C1 ea...

BGK25(or 27)RC1 ea...

16(or 17)KDPS1ea...

ACSM16B or 17B1ea...

ACSM SOLID GRIP WITH HPS HOOD AND FOREGRIP 16 or 17ORDER LIST

KDPS16/17

ACSM SOLID GRIP WITH HPS HOOD AND FOREGRIP 16 or 17HPS16(or 17)

ASHGB KDPS16/17

CSM16B or 17B A

CSM16B or 17B A

ACSM SOLID GRIP WITH HPS HOOD AND FOREGRIP 16 or 17

= Black HoodASHB

BGA11C (11-inch) BGA9C (9-inch)

BGA11C (11-inch) BGA9C (9-inch)

RBC1720

REF# RSK43

RBC17201 ea..

BGA9C or 11C1 ea...

FGH25(or 27)C1 ea...

16(or 17)HPS1ea...

ACSM16B or 171ea...

e 17)FGH27C (siz

REF# RSK44

WCS (metallized

p

A

L

A

L

B

L

A

L

A

L

ACSM Casting Reel Seats: DOWNLOCKING Split Grip ACSM is an extremely versatile, downlocking casting seat, built for direct blank contact by the angler for added sensitivity. Available in sizes 16 and 17, For proper �t, order the model that matches the diameter of your blank at the point where the reel seat will be positioned. Sizes range from 9.5 mm to 15 mmNOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold in half mm ID increments from 6.0 to 16.5mm; WCS (metallized plastic) is available in Black, Gold and Silver in half mm ID increments from 7.0 to 16.0mm. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVANOTE: ECSM SEATS USE NO ARBORS AND MUST BE SIZED TO THE BLANK DIAMETER. PLEASE REFER TO PAGE 49 OF OUR CATALOG FOR SIZING INFORMATION

PAGE 17

ACSM (16 or 17 see catalog)Requires Custom Winding Check

Requires Custom Winding Check

ACSM16GB B = Black Hood

ORDER LIST1ea...ACSM size 16 or 17

1 ea...BGA95RC

1 ea..BGK485RC or

BGKS65RC (extended)

2ea...AWC

ACSM SPLIT GRIP WITH TRADITIONAL METAL HOOD AND NO FOREGRIP 16 or 17BGA95RC

AWC

BGK485RC or BGS65RC (Extended)

Lgth = 2 inchesDia = approx 28mmBG525RC: Lgth = 2.5-inchesDia = approx 28mm

ACSM16B or 17BORDER LIST1ea...ACSM size 16 or 17

1ea...SKSS16(or 17)/ASH

1 ea...BGA95RC

1 ea..BGK485RC or

BGKS65RC (extended)

2ea...AWC

ACSM SPLIT GRIP WITH GRAPHITE/NYLON HOOD AND NO FOREGRIP 16 or 17BGA95RC

AWC

BGK485RC or BGS65RC (Extended)

Lgth = 2 inchesDia = approx 28mmBG525RC: Lgth = 2.5-inchesDia = approx 28mm

SKSS16 (or 17)/ASH

ACSM16B or 17BORDER LIST1ea...ACSM size 16 or 17

1ea...KSKSS16(or 17)/ASH

1ea...BGKS16(or 17)

1 ea...BGA95RC

1 ea..BGK485RC or

BGKS65RC (extended)

2ea...AWC

ACSM SPLIT GRIP WITH GRAPHITE/NYLON HIDDEN THREAD HOOD 16 or 17BGA95RC

BGKS16(or17) AWC

BGK485RC or BGS65RC (Extended)

Lgth = 2 inchesDia = approx 28mmBGS65RC: Lgth = 2.5-inchesDia = approx 28mm

KSKSS16(or 17)/ASH

ACSM16B or 17BORDER LIST1ea...ACSM size 16 or 17

1ea...KDPS16(or 17)

1ea...FGK25RC(or 27RC)1 ea...BGA95RC

1 ea..BGK485RC or

BGKS65RC (extended)

2ea...AWC

ACSM SPLIT GRIP WITH HIDDEN THREAD KDPS 16 or 17BGA95RC

AWC

BGK485RC or BGS65RC (Extended)

Lgth = 2 inchesDia = approx 28mmBGS65RC: Lgth = 2.5-inchesDia = approx 28mm

KDPS16(or 17)

FGK25RC (size 16)FGK27RC (size 17)

ACSM16B or 17BORDER LIST1ea...ACSM size 16 or 17

1ea...HPS16(or 17)

1ea...FGH25C(or 27C)1 ea...BGA95RC

1 ea..BGK485RC or

BGKS65RC (extended)

2ea...AWC

ACSM SPLIT GRIP WITH HIDDEN THREAD HPS 16 or 17BGA95RC

AWC

BGK485RC or BGS65RC (Extended)

Lgth = 2 inchesDia = approx 28mmBGS65RC: Lgth = 2.5-inchesDia = approx 28mm

HPS16(or 17)

FGH25C (size 16)FGH27C (size 17)

Add Universal Foregrip FGS25C or FGS2RC with rubberized cork

Add Universal Foregrip FGS25C or FGS2RC with rubberized cork

REF# RSK45

REF# RSK46

REF# RSK47

REF# RSK48

REF# RSK49

KDPS16/17GBASH BASH = Black Hood

TCSM (TCSSD Deluxe) Reel Seats: DOWNLOCKING Solid Grip CastingTCSM is an smooth pro�le, downlocking casting seat, available in sizes 16, 17, 18. An excellenrt choice for Medium Heavy and Heavy Power casting rods. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA

TCSM16, 17, 18 (STANDARD)TCSSD16, 17, 18 (DELUXE)

TCSM16, 17(STANDARD)TCSSD16, 17(DELUXE)

G GB B = Black Hood

PAGE 18

ORDER LIST1ea...TCSM (or TCSSD) size 16,17,18

1 ea...BGA9C or 11C

1 ea...RBC1720

2 ea...NSA16, 17 or 18

ORDER LIST1ea...TCSM (or TCSSD) size 16,17

1 ea...BGA9C or 11C

1 ea...RBC1720

1 ea...SKSS16(OR 17)/ASH

2 ea...NSA16, 17

ORDER LIST1ea...TCSM (or TCSSD) size 16,17,18

1 ea...BGA9C or 11C

1 ea...RBC1720

1 ea...FGS25C or FGS2RC

2 ea...NSA16, 17 or 18

1 ea...AWC G GB B = Black Hood

KDPS16ASH = Frosted Hood GBASH BASH = Black Hood

TCSM SEAT WITH TRADITIONAL METAL HOOD AND SOLID GRIP, NO FOREGRIP

TCSM SEAT GRAPHITE/NYLON NUT AND HOOD, NO FOREGRIP

TCSM SEAT WITH UNIVERSAL FOREGRIP

BGA9C (9-inch) orBGA11C (11-inch)

BGA9C (9-inch) orBGA11C (11-inch)

Dia = 25.5mm (smallest)Size 16 and 17 will accept WCS winding check,size 18 requires custom winding check.

Size 16 and 17 will accept WCS winding check,size 18 requires custom winding check. Dia = 25.5mm (smallest)

RBC1720

RBC1720

SKSS16(OR 17)/ASH

TCSM16, 17, 18 (STANDARD)TCSSD16, 17, 18 (DELUXE)

BGA9C (9-inch) orBGA11C (11-inch)

RBC1720

Add Universal Foregrip FGS25C or FGS2RC with rubberized cork

ORDER LIST1ea...TCSM (or TCSSD) size 16,171 ea...BGA9C or 11C1 ea...RBC17201 ea...KSKSS16 or 17/ASH1 ea...BGKS16 or 17C2 ea...NSA16, 17

TCSM SEAT WITH HIDDEN THREAD KSKSS/ASH FOREGRIPTCSM16, 17(STANDARD)TCSSD16, 17(DELUXE)

BGA9C (9-inch) orBGA11C (11-inch)

RBC1720

KSKSS16(OR 17)/ASHBGKS16(OR 17)C

ORDER LIST1ea...TCSM (or TCSSD) size 16,171 ea...BGA9C or 11C1 ea...RBC17201 ea...KDPS16(OR 17)ASH1 ea...FGK25 or 27C2 ea...NSA16, 17

TCSM SEAT WITH HIDDEN THREAD KDPS FOREGRIPTCSM16, 17(STANDARD)TCSSD16, 17(DELUXE)

BGA9C (9-inch) orBGA11C (11-inch)

RBC1720

KDPS16(OR 17)ASH

FGK25C (SIZE 16)FGK27C (SIZE 17)

ORDER LIST1ea...TCSM (or TCSSD) size 16,17

1 ea...BGA9C or 11C

1 ea...RBC1720

1 ea...HPS16(OR 17)N

1 ea...FGH25 or 27C

2 ea...NSA16, 17

TCSM SEAT WITH HIDDEN THREAD HPS FOREGRIPTCSM16, 17(STANDARD)TCSSD16, 17(DELUXE)

BGA9C (9-inch) orBGA11C (11-inch)

RBC1720

HPS16(OR 17)N

FGH25C (SIZE 16)FGH27C (SIZE 17)

NSA16, 17 or 18

NSA16 or 17

NSA16, 17 or 18

NSA16 or 17

NSA16 or 17

NSA16 or 17

REF# RSK50

REF# RSK51

REF# RSK52

REF# RSK53

REF# RSK54

REF# RSK55

AWC

GE 18 AP

CSSD DTCSM (T eel Se) ReluxCSSD D OCKING Sts: DOWNLeaeel S ip Colid GrOCKING S astingip Ct the end of the st a”” aC“er he lettTTE: NOo�leCSM is an smooth prTTCSM is an smooth pr

CSSD DTCSM (T

T WIT TCSM SEA AT WITH TRADITIONAL MET

NSA16, 17 or 182 ea...

RBC17201 ea...

BGA9C or 11C1 ea...

size 16,17,18TCSM (or TCSSD) 1ea...

ORDER LISTUXE)CSSD16, 17, 18 (DELTTCSSD16, 17, 18 (DEL

ANDCSM16, 17, 18 (ST TANDTTCSM16, 17, 18 (ST

es a ctock number indicat the end of the stailable in sizv, ating casting seawnlock, doo�le

eel Se) ReluxCSSD D

A TH TRADITIONAL MET TAL HOOD AND SOLID GRIP

18 size 16 Siz

UXE))ARDAND

tical paror iden f“E”” fe , substitutiprk gores a ct choicellenrcxn ees 16, 17, 18. Aailable in siz

OCKING Sts: DOWNLeaeel S

AL HOOD AND SOLID GRIPNSA16, 17 or 18

AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical paroy Pvy and Heavedium Heaor Me ft choic

ip Colid GrOCKING S

, NO FOREGRIP RIP P, NO FOREGRIP

BGA11C (11-inch) BGA9C (9-inch) orNSA16, 17 or 18

. odser casting rwo

astingip C

RBC1720

REF# RSK50

( i 16 17

T GRAPHITE/NYLON NUT AND HOOD, NO FOREGRIPTCSM SEA

NSA16, 172 ea...

SKSS16(OR 17)/ASH1 ea...

RBC17201 ea...

BGA9C or 11C1 ea...

size 16,17TCSM (or TCSSD) ...1ea

ORDER LIST

NSA16, 17 or 182 ea...

G

CSSD16, 17(DTTCSSD16, 17(DELCSM16, 17(STTCSM16, 17(ST

T GRAPHITE/NYLON NUT AND HOOD, NO FOREGRIP

SKSS16(OR 17)/ASH

OR 17)/ASHSKSS16(

ee 18 rsize 16 an Siz

e 18 siz

GB

UXE)CSSD16, 17(DEL)ARDAND T TAND

T GRAPHITE/NYLON NUT AND HOOD, NO FOREGRIP

= Black HoodB

T GRAPHITE/NYLON NUT AND HOOD, NO FOREGRIP

BGA11C (11-inch) BGA9C (9-inch) orNSA16 or 17

= Black Hood

RBC1720

REF# RSK51

T WIT TCSM SEA AT WITH UNIVERSAL FOREGRIP

CAW1 ea...

NSA16, 17 or 182 ea...

FGS25C or FGS2RC1 ea...

RBC17201 ea...

BGA9C or 11C1 ea...

size 16,17,18TCSM (or TCSSD) 1ea...

ORDER LIST

NSA16, 172 ea...

T WITH UNIVERSAL FOREGRIP

FGS25C or FGS2RC

CSSD16, 17, TTCSSD16, 17, 18 (DELCSM16, 17, 1 TTCSM16, 17, 18 (STCAW

T WITH UNIVERSAL FOREGRIP

G

UXE)CSSD16, 17, 18 (DEL)ARDAND 18 (ST TAND

GB

BGA11C (11-inch) BGA9C (9-inch) or

= Black HoodB

RBC1720

REF# RSK52

( size 16 17

T WIT TCSM SEA AT WITH HIDDEN THREAD KSKSS/ASH FOREGRIP

NSA16, 172 ea...BGKS16 or 17C1 ea...KSKSS16 or 17/ASH1 ea...RBC17201 ea...BGA9C or 11C1 ea...

size 16,17TCSM (or TCSSD) ea...1

ORDER LIST

T WIT TCSM SEA AT WITH HIDDEN THREAD KDPS FOREGRIP

CSSD16, 17(DTTCSSD16, 17(DELCSM16, 17(STTCSM16, 17(ST

T WITH HIDDEN THREAD KSKSS/ASH FOREGRIP

KSKSS16 or 17/ASH

T WITH HIDDEN THREAD KDPS FOREGRIP

OR 17)CBGKS16(

UXE)CSSD16, 17(DEL)ARDAND T TAND

T WITH HIDDEN THREAD KSKSS/ASH FOREGRIP

T WITH HIDDEN THREAD KDPS FOREGRIP

BGA11C (11-inch) BGA9C (9-inch) or

RBC1720

REF# RSK54

REF# RSK53

TCSM (or T size 16 17

T WIT TCSM SEA AT WITH HIDDEN THREAD KDPS FOREGRIP

NSA16, 172 ea...FGK25 or 27C1 ea...KDPS16(OR 17)ASH1 ea...RBC17201 ea...BGA9C or 11C1 ea...

size 16,17TCSM (or TCSSD) ea...1

ORDER LIST

T WIT TCSM SEA AT WITH HIDDEN THREAD HPS FOREGRIP

ostrKDPS16ASH = F

T WITH HIDDEN THREAD KDPS FOREGRIP

KDPS16(OR 17)ASH

T WITH HIDDEN THREAD HPS FOREGRIP

FGK27C (SIZE 17)FGK25C (SIZE 16)

ASHGBed Hood ost

T WITH HIDDEN THREAD KDPS FOREGRIP

UXE)CSSD16 17(DELT)ARDANDCSM16, 17(ST TANDT

T WITH HIDDEN THREAD HPS FOREGRIP

= Black HoodASHB

BGA9C (9-inch) or

BGA9C (9-inch) or

= Black Hood

RBC1720

REF# RSK55

REF# RSK54

NSA16, 172 ea...

FGH25 or 27C1 ea...

HPS16(OR 17)N1 ea...

RBC17201 ea...

BGA9C or 11C1 ea...

size 16,17TCSM (or TCSSD) 1ea...

ORDER LISTFGH27C (SIZE 17)FGH25C (SIZE 16)

HPS16(

UXE)CSSD16 17(DELT)ARDANDCSM16, 17(ST TANDT

OR 17)N(

BGA11C (11-inch) BGA9C (9-inch) or RBC1720

B

S

B

B

B

T

TCSM (TCSSD Deluxe) Reel Seats: DOWNLOCKING Split Grip CastingTCSM is an smooth pro�le, downlocking casting seat, available in sizes 16, 17, 18. An excellenrt choice for Medium Heavy and Heavy Power casting rods. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA

TCSM16, 17, 18 (STANDARD)TCSSD16, 17, 18 (DELUXE)

TCSM16/B, 17/B (STANDARD)TCSSD16/B, 17/B, (DELUXE)

G GB B

G GB B

PAGE 19

ORDER LIST

1 ea...TCSM (or TCSSD) size 16,17,181 ea...BGA95RC1 ea...BGK485RC or 65RC1 ea...BGK485RC or 652 ea...NSA16, 17, 18 2 ea...AWC

ORDER LIST1 ea...TCSM (or TCSSD) size 16/B,17/B1 ea...SKSS16 OR 17/ASH1 ea...BGA95RC1 ea....BGK485RC or 65RC2 ea...NSA16, 172 ea...AWC1 ea...WCS

ORDER LIST1 ea...TCSM (or TCSSD) size 16,17,181 ea...BGA95RC1 ea....BGK485RC or 65RC3 ea...AWC1 ea...FGS25C OR FGS2RC2 ea...NSA16, 17, 18

ORDER LIST1 ea...TCSM (or TCSSD) size 16/B,17/B

1 ea...KSKSS16 OR 17/ASH

1 ea...BGKS16RC OR 17RC

1 ea...BGA95RC

1 ea....BGK485RC or 65RC

2 ea...AWC

ORDER LIST1 ea...TCSM (or TCSSD) size 16/B,17/B1 ea...KDPS16 OR 17ASH1 ea...FGK25RC OR 27RC1 ea...BGA95RC1 ea....BGK485RC or 652 ea...AWC2 ea...NSA16 or 17

ORDER LIST1 ea...TCSM (or TCSSD) size 16/B,17/B1 ea...HPS16 OR 17N1 ea...FGH25C OR 27C1 ea...BGA95RC1 ea....BGK485RC or 65RC2 ea...AWC2 ea...NSA16 or 17

KDPS16ASH = Frosted Hood GBASH BASH = Black Hood

TCSM SEAT WITH TRADITIONAL METAL HOOD AND SPLIT GRIP, NO FOREGRIP

TCSM SEAT GRAPHITE/NYLON NUT AND HOOD, SPLIT GRIP NO FOREGRIP. 16, 17 ONLY

TCSM SEAT WITH SPLIT GRIP AND UNIVERSAL FOREGRIP

BGA95RC

BGA95RC

Size 16 and 17 will accept WCS winding check,size 18 requires custom winding check.

BGK485RC or BGS65RC (Extended)

BGK485RC or BGS65RC (Extended)

SKSS16(OR 17)/ASH

BGA95RC

BGK485RC or BGS655RC (Extended)

BGA95RC

BGK485RC or BGS65RC (Extended)

BGA95RC BGK485RC or BGS65RC (Extended)

BGA95RC BGK485RC or BGS65RC (Extended)

TCSM16, 17, 18 (STANDARD)TCSSD16, 17, 18 (DELUXE)

Add Universal Foregrip FGS25C or FGS2RC with rubberized cork

TCSM SEAT WITH SPLIT GRIP, HIDDEN THREAD AND KSKSS/ASH FOREGRIP. 16, 17 ONLY TCSM16/B, 17/B(STANDARD)TCSSD16/B, 17/B(DELUXE)

KSKSS16(OR 17)/ASHBGKS16(OR 17)RC

TCSM SEAT WITH SPLIT GRIP, HIDDEN THREAD AND KDPS FOREGRIP. 16, 17 ONLY TCSM16/B, 17/B (STANDARD)TCSSD16/B, 17/B (DELUXE)

KDPS16(OR 17)ASH

FGK25RC (SIZE 16)FGK27RC (SIZE 17)

TCSM SEAT WITH SPLIT GRIP, HIDDEN THREAD AND HPS FOREGRIP.16, 17 ONLYTCSM16/B, 17/B, (STANDARD)TCSSD16/B, 17/B, (DELUXE)

HPS16(OR 17)N

FGH25C (SIZE 16)FGH27C (SIZE 17)

AWC

AWC

AWC

AWC

AWC

NSA16, 17, 18

NSA16, 17

NSA16, 17, 18

NSA16, 17

NSA16, 17

NSA16, 17, 18

REF# RSK56

REF# RSK57

REF# RSK59

REF# RSK60

REF# RSK61

REF# RSK58

WCS

AWC

ECSM Reel Seats: BLANK EXPOSED DOWNLOCKING Solid Grip CastingECSM is an smooth pro�le, downlocking casting seat, available in sizes 16, 17, 18. An excellenrt choice for Medium Heavy and Heavy Power casting rods. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVANOTE: ECSM SEATS USE NO ARBORS AND MUST BE SIZED TO THE BLANK DIAMETER. PLEASE REFER TO PAGE 49 OF OUR CATALOG FOR SIZING INFORMATION

ECSM16 OR 17 (see catalog)

ECSM16 OR 17 (see catalog)

ECSM16GB B = Black Hood

ECSM16GB B = Black Hood

PAGE 20

ORDER LIST1 ea...ECSM size 16,171 ea...BGA9C or 11C1 ea...RBC17201 ea...WCS 16 or 17

ORDER LIST1 ea...ECSM16 OR 171 ea...SKSS16 OR 17/ASH1 ea...BGA9C or 11C1 ea...RBC17201 ea...WCS 16 or 17

ORDER LIST1 ea...ECSM16 OR 17

1 ea...BGA9C or 11C

1 ea...FGS25C OR FGS2RC

1 ea...RBC17201 ea...AWC

ORDER LIST1 ea...ECSM16 OR 17

1 ea...KSKSS16 OR 17/ASH

1 ea...BGKS16RC OR 17RC

1 ea...BGA95RC

1 ea...RBC1720

ORDER LIST1 ea...ECSM16 OR 17 1 ea...KDPS16 OR 17ASH1 ea...FGK25C OR 27C1 ea...BGA9C or 11C1 ea...RBC1720

ORDER LIST1 ea...ECSM16 OR 171 ea...HPS16 OR 17N1 ea...FGH25C OR 27C1 ea...BGA9C or 11C1 ea...RBC1720

KDPS16ASH = Frosted Hood GBASH BASH = Black Hood

ECSM SEAT WITH TRADITIONAL METAL HOOD AND SOLID GRIP, NO FOREGRIP

ECSM SEAT GRAPHITE/NYLON NUT AND HOOD, SOLID GRIP NO FOREGRIP

ECSM SEAT WITH SOLID GRIP AND UNIVERSAL FOREGRIP

Size 16 and 17 will accept WCS winding check,

Size 16 and 17 willaccept WCS windingcheck,

SKSS16(OR 17)/ASH

ECSM16 OR 17 (see catalog)

Add Universal Foregrip FGS25C or FGS2RC with rubberized cork

ECSM SEAT WITH SOLID GRIP, HIDDEN THREAD AND KSKSS/ASH FOREGRIP ECSM16 OR 17(see catalog)

KSKSS16(OR 17)/ASHBGKS16(OR 17)RC

ECSM SEAT WITH SOLID GRIP, HIDDEN THREAD AND KDPS FOREGRIPECSM16 OR 17(see catalog)

KDPS16(OR 17)ASH

FGK25C (SIZE 16)FGK27C (SIZE 17)

ECSM SEAT WITH SOLID GRIP, HIDDEN THREAD AND HPS FOREGRIPECSM16 OR 17 (see catalog)

HPS16(OR 17)N

FGH25C (SIZE 16)FGH27C (SIZE 17)

BGA9C (9-inch) orBGA11C (11-inch)

RBC1720

BGA9C (9-inch) orBGA11C (11-inch)

RBC1720

BGA9C (9-inch) orBGA11C (11-inch)

RBC1720

BGA9C (9-inch) orBGA11C (11-inch)

RBC1720

BGA9C (9-inch) orBGA11C (11-inch)

RBC1720

BGA9C (9-inch) orBGA11C (11-inch)

RBC1720

REF# RSK62

REF# RSK63

REF# RSK64

REF# RSK65

REF# RSK66

REF# RSK67

AWC

GE 20 AP

ECSM is an smooth preel SECSM R

ailable in sizting casting seawnlock, doo�lets: BLANK EXPOSED DOWNLeaeel S

t choicellenres 16, 17, 18. Aailable in sizOCKING Sts: BLANK EXPOSED DOWNL

y Py and Heaedium Heaor Me ft choicip Colid GrOCKING S

dasting

ti d i ip C

S USE NO ARBORS AND MUST BE SIZED TTE: ECSM SEA ATNOt the end of the st a”” aC“er he lettTTE: NOo�leECSM is an smooth pr

T WIT ECSM SEA AT WITH TRADITIONAL MET

WCS 16 or 171 ea...RBC17201 ea...BGA9C or 11C1 ea...

size 16,17ECSM 1 ea...

ORDER LIST

ECSM16 OR 17 (see ca

O TS USE NO ARBORS AND MUST BE SIZED es a ctock number indicat the end of the st

ailable in sizv, ating casting seawnlock, doo�le

A TH TRADITIONAL MET TAL HOOD AND SOLID GRIP

e Siz

talog)ECSM16 OR 17 (see ca

TER. PLEASE REFER METHE BLANK DIAO tical paror iden f“E”” fe , substitutiprk gores a ct choicellenrcxn ees 16, 17, 18. Aailable in siz

AL HOOD AND SOLID GRIP

OG FOR SIZING INFORMALTTALAATGE 49 OF OUR CAO PTTO PTER. PLEASE REFER AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical par

oy Pvy and Heavedium Heaor Me ft choic

, NO FOREGRIP RIP P, NO FOREGRIP

BGA11C (11-inch) BGA9C (9-inch) or

TION AATION OG FOR SIZING INFORM

. odser casting rwo

RBC1720

T GRAPHITE/NYLON NUT AND HOOD, SOLID GRIP NO FOREGRIPECSM SEA

WCS 16 or 171 ea...RBC17201 ea...BGA9C or 11C1 ea...SKSS16 OR 17/ASH1 ea...

16 OR 17ECSM1 ea...ORDER LIST

checkept WCS cac

e 16 and 17 willSiz

ECSM16

ECSM16 OR 17

T GRAPHITE/NYLON NUT AND HOOD, SOLID GRIP NO FOREGRIP

SKSS16 OR 17/ASH

,checkept WCS 16 and 1

GB ECSM16

talog)(see ca

T GRAPHITE/NYLON NUT AND HOOD, SOLID GRIP NO FOREGRIP

= Black HoodB

T GRAPHITE/NYLON NUT AND HOOD, SOLID GRIP NO FOREGRIPBGA9C (9-inch) or

RBC1720

REF# RSK63

REF# RSK62

T WIT ECSM SEA AT WITH SOLID GRIP AND UNIVERSAL FOREGRIP

CAW1 ea...RBC17201 ea...

FGS25C OR FGS2RC1 ea...

BGA9C or 11C1 ea...

ECSM16 OR 171 ea...ORDER LIST

AW

ECSM16

T WITH SOLID GRIP AND UNIVERSAL FOREGRIP

C

ECSM16 OR 17

kored cizC with rubberFGS2R

C AW

GBECSM16

T WITH SOLID GRIP AND UNIVERSAL FOREGRIPtalog)(see caECSM16 OR 17

= Black HoodB

BGA11C (11-inch) BGA9C (9-inch) or

RBC1720

REF# RSK64

REF# RSK63

RBC17201 ea...

BGA95RC1 ea...

BGKS16RC OR 17RC 1 ea...

KSKSS16 OR 17/ASH1 ea...

ECSM16 OR 171 ea...ORDER LIST

T WIT ECSM SEA AT WITH SOLID GRIP

T WIT ECSM SEA AT WITH SOLID GRIP

BGKS16RC OR 17RC

KSKSS16 OR 17/ASH

, HIDDEN TH SOLID GRIP P, HIDDEN THREAD AND KSKSS/ASH FOREGRIP ECSM16 OR 17

HIDDEN TH SOLID GRIP P

COR 17)RBGKS16( KSKSS16

, HIDDEN THREAD AND KSKSS/ASH FOREGRIP talog)(see caECSM16 OR 17

, HIDDEN THREAD AND KDPS FOREGRIP

OR 17)/ASH6(

, HIDDEN THREAD AND KSKSS/ASH FOREGRIP

, HIDDEN THREAD AND KDPS FOREGRIP

BGA11C (11-inch) BGA9C (9-inch) or

RBC1720

REF# RSK65

RBC17201 ea...BGA9C or 11C1 ea...FGK25C OR 27C1 ea...KDPS16 OR 17ASH1 ea...ECSM16 OR 171 ea...

ORDER LIST

T WIT ECSM SEA AT WITH SOLID GRIP

T WIT ECSM SEA AT WITH SOLID GRIP

ostrKDPS16ASH = F

, HIDDEN TH SOLID GRIP P, HIDDEN THREAD AND KDPS FOREGRIPECSM16 OR 17

)

, HIDDEN TH SOLID GRIP P, HIDDEN THREAD AND HPS FOREGRIP

FGK27C (SIZE 17)FGK25C (SIZE 16)

GBASHed Hood t

, HIDDEN THREAD AND KDPS FOREGRIPtalog)(see caECSM16 OR 17

, HIDDEN THREAD AND HPS FOREGRIP

= Black HoodASHB

, HIDDEN THREAD AND KDPS FOREGRIP

, HIDDEN THREAD AND HPS FOREGRIP

BGA9C (9-inch) or

od

RBC1720

REF# RSK66

RBC17201 ea...BGA9C or 11C1 ea...FGH25C OR 27C1 ea...HPS16 OR 17N1 ea...ECSM16 OR 171 ea...

ORDER LIST

ECSM16 OR 17 FGH27C (SIZE 17)FGH25C (SIZE 16)

talog)(see caECSM16 OR 17

BGA11C (11-inch) BGA9C (9-inch) or

REF# RSK67

RBC1720

ECSM Reel Seats: BLANK EXPOSED DOWNLOCKING Split Grip CastingECSM is an smooth pro�le, blank exposed, downlocking casting seat, available in sizes 16 or 17. An excellenrt choice for Medium Heavy and Heavy Power casting rods. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVANOTE: ECSM SEATS USE NO ARBORS AND MUST BE SIZED TO THE BLANK DIAMETER. PLEASE REFER TO PAGE 49 OF OUR CATALOG FOR SIZING INFORMATION

ECSM16 OR 17

ECSM16 OR 17

ECSM16 OR 17

ECSM16 OR 17

ECSM16 OR 17

ECSM16 OR 17

ECSM16GB B = Black Hood

ECSM16GB B = Black Hood

PAGE 21

ORDER LIST1ea...ECSM16 OR 17

1 ea...BGA95RC

1 ea...BGK485RC or BGS65RC 2 ea...AWC

1 ea...WCS 16 or 17

ORDER LIST1ea...ECSM16 OR 171 ea...SKSS16 OR 17/ASH1 ea...BGA95RC1 ea....BGK485RC or BGS65RC2 ea...AWC1 ea...WCS 16 or 17

ORDER LIST1ea...ECSM16 OR 17

1 ea...BGA95RC

1 ea..BGK485RC or BGS65RC

2 ea...AWC

1 ea...FGS25C OR 2RC

ORDER LIST1ea...ECSM16 OR 17

1 ea...KSKSS16 OR 17/ASH

1 ea...BGKS16RC OR 17RC

1 ea...BGA95RC

1 ea....BGK485RC or BGS65RC

2 ea...AWC

ORDER LIST1ea...ECSM16 OR 17

1 ea...KDPS16 OR 17ASH1 ea...FGK25RC OR 27RC1 ea...BGA95RC

1 ea....BGK485RC or BGS65RC2 ea...AWC

ORDER LIST1ea...ECSM16 OR 17

1 ea...HPS16 OR 17N1 ea...FGH25C OR 27C1 ea...BGA95RC

1 ea...BGK485RC or BGS65RC2 ea...AWC

KDPS16ASH = Frosted Hood GBASH BASH = Black Hood

ECSM SEAT WITH TRADITIONAL METAL HOOD AND SPLIT GRIP, NO FOREGRIP

ECSM SEAT GRAPHITE/NYLON NUT AND HOOD, SPLIT GRIP NO FOREGRIP

ECSM SEAT WITH SPLIT GRIP AND UNIVERSAL FOREGRIP

BGA95RC

BGA95RC

BGK485RC or BGS65RC (Extended)

BGK485RC or BGS6RC (Extended)

SKSS16(OR 17)/ASH

BGA95RC

BGK485RC or BGS65RC (Extended)

BGA95RC

BGK485RC or BGS65RC (Extended)

BGA95RC

BGK485RC or BGS65RC (Extended)

BGA95RC

BGK485RC or BGS65RC (Extended)

Add Universal Foregrip FGS25C or FGS2RC with rubberized cork

ECSM SEAT WITH SPLIT GRIP, HIDDEN THREAD AND KSKSS/ASH FOREGRIP Z

KSKSS16(OR 17)/ASHBGKS16(OR 17)C

ECSM SEAT WITH SPLIT GRIP, HIDDEN THREAD AND KDPS FOREGRIP

KDPS16(OR 17)ASH

FGK25RC (SIZE 16)FGK27RC (SIZE 17)

ECSM SEAT WITH SPLIT GRIP, HIDDEN THREAD AND HPS FOREGRIP

HPS16(OR 17)N

FGH25C (SIZE 16)FGH27C (SIZE 17)

AWC WCS16 or 17

WCS16 or 17

AWC

AWC

AWC

AWC

AWC

AWC

REF# RSK68

REF# RSK67

REF# RSK69

REF# RSK70

REF# RSK71

REF# RSK72

IPSM (IPSSD Deluxe) Reel Seats: DOWNLOCKING Solid Grip SpinningIPSM is a stylish, downlocking spinning seat, available in sizes 16 only. An excellenrt choice for Light to Medium Light spinning rods. Can be adapted with optional trigger to a casting rod (Part IPS16/TR) NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA

IPSM16

WCS (see catalog for sizing info)

IPSM16/B

IPSM16

AWC

IPSM16/B

IPSM16/B

IPSM16/B

IPSM16GB B = Black Hood

IPSM16GB B = Black Hood

PAGE 22

ORDER LIST1ea...IPSM(or IPSSD)16

1 ea...BGS8514C

1 ea...ERC23

2 ea...NSA16 1 ea...WCS 16

ORDER LIST1ea...IPSM(or IPSSD)16/B

1 ea...BGS8514C (spin)

1 ea...ERC23

2 ea...NSA16 1 ea...WCS 16

ORDER LIST1ea...IPSM(or IPSSD)16

1 ea...BGS8514C (spin)

1 ea...ERC23

2 ea...NSA16

1 ea...AWC 16

ORDER LIST1ea...IPSM(or IPSSD)16/B1 ea...BGS8514C 1 ea...ERC231 ea...KDPS16ASH1 ea...FGK25RC2 ea...NSA161 ea...ERC23

ORDER LIST1ea...IPSM(or IPSSD)16/B1 ea...BGS8514C (spin1 ea...ERC231 ea...HPS16N1 ea...FGH25C2 ea...NSA16For casting: BGC8514C & IPS16/TR

ORDER LIST

1ea...IPSM16/B1 ea...BGS25C

Plus Parts to complete

IPSM SEAT WITH TRADITIONAL METAL HOOD AND SOLID GRIP, NO FOREGRIP, SIZE 16

IPSM SEAT GRAPHITE/NYLON NUT AND HOOD, SOLID GRIP NO FOREGRIP, SIZE 16

IPSM SEAT WITH SOLID GRIP AND UNIVERSAL FOREGRIP

SKSS16/ASH

Add Universal Foregrip FGS25C or FGS25RC with rubberized cork

IPSM SEAT WITH SOLID GRIP, HIDDEN THREAD AND KDPS FOREGRIP

KDPS16ASH

KDPS16ASH or any con�guration above

FGK25RC

IPSM SEAT WITH SOLID GRIP, HIDDEN THREAD AND HPS FOREGRIP

HPS16N

FGH25C

FGH25RC or required cork

IPSM SEAT WITH ADAPTER CORK

BGS8514C ERC23

BGS8514C ERC23

BGS8514C ERC23

BGS8514C ERC23

BGS8514C ERC23

BGS25C BGA25RCor Custom Cork

NSA16

NSA16

NSA16

NSA16

NSA16

BGK485RC or BGK525RC (Extended)or Custom Cork

REF# RSK73

REF# RSK74

REF# RSK75

REF# RSK76

REF# RSK77

REF# RSK78

WCS

NOTES

Anglers Resource:

website: www.anglersresource.net

Facebook:

www.facebook.com/anglersresource

Newsletter subscription:

http://anglersresource.net/Subscri-

betotheGuide.aspx

Technical questions:

[email protected]

Other questions:

[email protected]

Request a product catalog:

1-251-943-4491

Self Mailing Info

400 E Section Ave

Foley al 36535


Recommended