Untitled Exam - GRATIS EXAM · B. System management interface interchange Server C. Avaya Site...

Untitled Exam

Number: 000-000Passing Score: 800Time Limit: 120 minFile Version: 1.0

http://www.gratisexam.com/

Exam A

QUESTION 1What are two ways of obtaining the RFA Module ID (MID) and System ID (SID)?

(Choose two.)

A. From the CM Linux prompt issue the command "statuslicense V.B. From the CM SAT issue the command list configuration software-versions.C. From the CM Linux prompt issue the command 'systat'.D. From the CM SAT issue the command 'display system-parameters customer-options.

Correct Answer: ADSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 2At a new deployment the customer has the total of 2000 subscribers at their main location. They do notneed redundancy in their solution.

Which Media Server gateway combination should be used for this deployment?

A. S8800 Simplex with G450B. S8300D with G450C. S8300D with G430D. S8800 duplex with G650

Correct Answer: ASection: (none)Explanation


QUESTION 3Which three settings need to be configured on a Layer 2 device? (Choose three)

A. RIPB. Port speedC. IP addressD. Default gatewayE. Routing interface

Correct Answer: BCDSection: (none)Explanation

Explanation/Reference:"Pass Any Exam. Any Time." - www.actualtests.com 2Avaya 6006-1 Exam

Explanation:

QUESTION 4Which two statements about the installing and cabling of the Media gateway G650 are true?


A. Mount the A carrier at the bottom of the rackB. Mount the A carrier at the uppermost position in the rackC. In a Multiple Media gateway G650 configuration, the G650s can be allocated in different racks if long

TDM/LAN cables are used to interconnect the G650s.D. In a multiple Media Gateway G650 configuration put the G650s in the rack with no vertical space

between them



QUESTION 5Before IPSI cards can become active on a new Communication Manager system, which screen must beaccessed to enable IPSI control of the port networks?

A. System-parameters IP-optionsB. System-parameters IPSI-optionC. System-parameters port-networksD. System-parameters IP Server-interface

Correct Answer: DSection: (none)Explanation


QUESTION 6A customer has 1200 OP phones in their solution and they are looking for redundancy and load balancing.

How many CLANs are recommended for their IP phone registration and signaling?

A. 2B. 3C. 4

"Pass Any Exam. Any Time." - www.actualtests.com 3Avaya 6006-1 Exam

D. 5

Correct Answer: BSection: (none)Explanation


QUESTION 7A technician is testing calls from IP phones at a remote location on a G450/LSP to main location served by

S83XX/G450 over the WAN. Busy tones are received when multiple calls between the two locations arealready active. The network regions and G 711 and G 729 codec set have been set up.

Which two steps must be taken to ensure the branch IP phones are using the minimum WAN bandwidthwhen calling main location stations? (Choose two)

A. Assign branch IP phones to the G450 LSP as its call server in IP-network-region-2 form.B. Assign G.729 as primary codec in station form for the branch IP phones.C. Use the IP-network map form to assign the branch IP phones to network region 2.D. Create a third codec Set and assign to the G450 gateway in IP-network-region 2 form.E. Verify calls between NR1 and NR2 use G729 codec in IP-network-region 1 form

Correct Answer: BCSection: (none)Explanation


QUESTION 8A customer asks that the current subnet mask assigned to a remote Avaya G450 Media Gateway PrimaryManagement Interface (PM) be verified.

Which two commands identify the information requested? (Choose two)

A. Show IP-infoB. Show running-configC. Show interface VLAN (vlan #)D. Show configuration media GatewayE. Show system




QUESTION 9A customer uses a S8510 server with a Media Gateway G650. No more circuit pack slots are left and thecustomer has already ordered and received the necessary components for adding additional DCP phonesto the system, including a new G850.

Which three tasks need to be performed while installing the additional equipment?

(Choose three)

A. Cable the two G850 carries with a TDM/LAN Bus Extender cable.B. Set the proper carrier address ID for the second G650 carrier.C. Add additional 2GB of RAM to the S8510 server.D. Remove the right TDM/LAN bus terminal from the bottom G850 carrier and install the bus terminator at

the left end of the TDM/LAN bus on the G650 carrier directly above.E. The new digital line card must be installed din slot 2 of new G650

Correct Answer: ABDSection: (none)Explanation


QUESTION 10The Avaya G450 Media Gateway can be configured to function as a DHCP (Dynamic Host ConfigurationProtocol) client. DHCP client enables the G450 to receive an IP address from a DHCP server, according tothe DHCP client-server protocol.

As an option, the G450 DHCP client can also request to receive which three types of IP-relatedinformation? (Choose three)

A. A list of H 248 Media gateways in the systemB. A domain NameC. A list of default routersD. A list of all registered IP PhonesE. A list of available DNS servers

Correct Answer: BCESection: (none)Explanation


QUESTION 11A technician is planning to install the license file on a duplicated S8700-series server.

"Pass Any Exam. Any Time." - www.actualtests.com 5Avaya 6006-1 ExamWhich two statements are true about license installation? (Choose two)

A. Install the license file first on the active server and after that, login to the standby server and install thelicense file again.

B. Install the license file first on the active server. The standby server is polled automatically via theduplication link.

C. The license is registered to serial number of the reference IPSI. The S8700-series server remains in"No License Mode" until the IPSI mode is installed and detected.

D. The license is registered to the MAC address of the reference IPSI. . The S8700-series server remainsin "No License Mode" until the IPSI mode is installed and detected.



QUESTION 12Avaya recommends that the technician checks the "Latest Communication Manager Software andFirmative Compatibility Matrix" for software not formative compatibility.

What may occur if LSPs or ESS servers are running a different software load than the main server?

A. No issue will occur because of backward compatibility between the gateway and media firmware.B. No issue will occur because of primary controller will not attempt synchronization to LSPs or ESS

servers that have incompatible software.C. May cause transaction corruption because of the synchronization between the primary controller and the

LSPs /ESS server.D. May occur split registration because of the incompatible software versions.

Correct Answer: CSection: (none)Explanation


QUESTION 13The S8730 must be installed in a well-ventilated climate-controlled environment to ensure reliableequipment operation.

What is the maximum ambient operating temperature allowed for the S8730?


A. 40*C (104*F)B. 35*C (95*F)C. 30*C (86*F)D. 25*C (77*F)



QUESTION 14After installing a pair of S8730 servers, the customer wants to verify that the active and standby servers canbe switched so that the active server becomes the standby and the standby becomes the active

Where is this performed?

A. System management interface Switch ServerB. System management interface interchange ServerC. Avaya Site Administration interchange ServerD. Avaya Site Administration Activate Server



QUESTION 15RFA used for CM 5.2x and earlier license and /or authentication file delivery. The license files are used toactivate software including features, capabilities, releases, and offer categories.

Which two statements are true? (Choose two)

A. A new license file is not needed when upgrading from release 4.0 to release 5.2xB. An update license only requires a RFA System ID (SID) of the existing serverC. Each new license will require a SAP order number, the serial number of the reference IPSI, or the

gateway.D. Server serial number is used in RFA to validate new 502xlicense files.




QUESTION 16On which three Avaya Servers can the Communication Manager Messaging application be installed?(Choose three)

A. S8300B. S8510C. S8730D. S8800 SimplexE. S8720



QUESTION 17A media gateway G430 has been configured with an Avaya server S8300 acting as internal call Controller.Gateway and server are assigned to VLAN 12.

Which gateway command must be used to add the internal Call Controller to VLAN 12?

A. "interface vlan 12", then "icc-vlan"B. Icc-vlan 12C. Set vlan server 12, then "icc-vlan"D. Set default-vlan 12



QUESTION 18A user would like to see a list of number of registered IP endpoints with TCP signaling sockets establishedfor each CLAN or processor Ethernet.

Which command would be used?

A. Status clan-ip locationB. List ip interface clanC. List measurable clan socketsD. Status socket-usage



Explanation/Reference:

Explanation:

QUESTION 19Commercial AC is the primary input power source to the 655a power supply of the G650.

What are two nominal ranges for AC power? (Choose two)

A. 100-120 VAC at 50or 60HzB. 200-250 VAC at 40or 50HzC. 100-130 VAC at 40or 50HzD. 200-240 VAC at 50or 60Hz



QUESTION 20After the installation is complete several users are complaining that they cannot dial an external number.The trunks have been verified to be in service.

Which could cause this problem?

A. The COR is outward restricted.B. Trunk-to-trunk transfer has been turned off.C. Call activation in COS is set to "NO"D. The phones have not been assigned console permission.



QUESTION 21If the Ethernet switch in the Avaya IP telephony system supports spanning tree and port fast features, whichtwo should be configured on Ethernet ports that are connected to IP phones? (Choose two)


A. Enable port fastB. Disable port fastC. Enable port spanning treeD. Disable port spanning tree




QUESTION 22Which two statements about S87xx Software Duplication and Hardware Duplication are true?

(Choose two)

A. In the hardware duplication mode, the server's memory data is processed by the DAL 1 or DAL2 card.B. The software duplication feature provides memory synchronization between the active and standby

servers without the need for DAL cards or the limitation of fiber-optic cabling.C. The software duplication feature is the only option available for the S8730 Servers.D. The duplication mode, hardware or software, is controlled by the S87xx Servers license

Correct Answer: ABSection: (none)Explanation


QUESTION 23Which command is used to tell at what time a spontaneous interchange has taken place?

A. List usageB. Status healthC. Display initcauseD. List history



QUESTION 24A technician wants to test and see if the voice channel between two IP phones is shuffled.

"Pass Any Exam. Any Time." - www.actualtests.com 10 Avaya 6006-1 ExamA command in Site Administration Terminal (SAT) can be used to determine the type of IP connection, andto check if the voice channel is shuffled?

A. Status station <extension>B. Status shuffling <extension>C. List stationD. Test station <extension>



QUESTION 25A customer will be using Avaya one-X Communication in Road Warrior mode.

Which IP address will soft phone users access in Communication Manager 5.2.1 on a platform of S87XXserver and G650 Gateways?

A. Processor interface IP AddressB. H 248 Media Gateway IP AddressC. CLAN IP AddressD. Media Resource IP AddressE. S87XX Active Server IP Address



QUESTION 26Which three methods can be used during the configuration of a system backup using the systemManagement Interface? (Choose three)

A. FTPB. HTTPC. SCPD. SFTPE. TFTP

Correct Answer: ACDSection: (none)Explanation


"Pass Any Exam. Any Time." - www.actualtests.com 11 Avaya 6006-1 Exam

QUESTION 27Dropped calls are occurring frequently and the user would like to use a command to show packet lossexperienced by the MedPro.

Which two commands would show the packet loss? (Choose two)

A. Status IP-boardB. Status processor-IP-interfaceC. List measurements IP voice-statsD. List trace station

Correct Answer: ACSection: (none)Explanation


QUESTION 28Which two statements about IP phones firmware updates are true? (Choose two)

A. An upgrade script file and the settings files are required to perform an upgrade on IP phones.B. SIP Phones download script files, setting files, and firmware from tftp servers only.C. A tftp, or https server are required for IP Phone firmware upgrades.D. The S8300 media server offers fttp capability for IP phone Upgrades.



QUESTION 29In a G430 Media Gateway, what is the only component that is NOT supported?

A. S8300B. MM340C. MM710D. MM712




QUESTION 30The G450 serves as a router as well as the endpoint for the WAN line.

Which physical interface is used to make the G450 a router?

A. WAN Serial interfaceB. Loopback interfaceC. ETH WAND. ETH LAN



QUESTION 31In the event of network or server failure, the connection preserving migration (CPM) feature preservesexisting bearer (voice) connections while the H248 media migrates from one Communications ManagerServer to another.

What are users expected experience on preserved calls during the migration?

A. CPM will extend the time period for recovery operations and functions so features such as hold,Conference, or transfer will be available to users on preserved calls.

B. CPM will extend the time period for recovery operations and functions but users cannot use featuressuch as hold, Conference, or Transfer

C. Recovery operations and functions remain stable during CPM so all CM features are available.D. CPM will utilize Alternate Gatekeeper list functions to preserve all user features including Hold,

Conference, or Transfer.



QUESTION 32Media gateway can be configured to automatically return to the primary Media Gateway when networkcommunication failure is resolved?

"Pass Any Exam. Any Time." - www.actualtests.com 13 Avaya 6006-1 ExamWhich command must be set so the Gateway knows what to do when the network failure has beenresolved?

A. In the GW CLI, administer the `primary-search timer' and `transaction-point value'B. In CM, administer ESS No Services Time Out Interval.C. In CM, administer the `system-parameter mg-recovery-rule [#].D. In GW, administer the `mgc list'.



QUESTION 33How many IP address need to be configured for a G450 Media Gateway's Layer 3 switch, Media gatewayProcessor (MGP), and internal VoIP module?

A. 1B. 2C. 3D. 4



QUESTION 34In an S8730 server configuration using software duplication, which Ethernet port is used as the duplicationlink?

A. Ethernet 0B. Ethernet 1C. Ethernet 2D. Ethernet 3



QUESTION 35"Pass Any Exam. Any Time." - www.actualtests.com 14 Avaya 6006-1 ExamA user would like to determine whether there are sufficient MedPro resources in the system?

Which command would be used? (choose two)

A. List measurements ip codecB. Status healthC. List measurements ip dsp-resourceD. Status socket-usage

Correct Answer: CDSection: (none)Explanation


QUESTION 36In addition to the duplicated servers, which other component should be duplicated in a high reliability S8xxxseries Server configuration?

A. CLANB. Media ProcessorC. Media ResourceD. IPSIE. SIPI



QUESTION 37Which command is used to identify the LSP/SLS in an H.248 Media Gateway?

A. Set mgc listB. Add mgc listC. Set ip routeD. Set lsp




QUESTION 38When configuring the LSP/SLS on Media Gateways, the gatekeeper information needs to be administeredso that stations register to the gateway during a WAN outage.

How would this be accomplished?

A. In CM use the `change station' command and set the field `Survivable Trunk Dest'? to YB. In Cm administer the `system-parameter mg-recovery-rule [#]' and identify the station.

C. In CM use the `change station' command and input the node of the gateway for the field for `SurvivableGK Node Name'

D. In CM use the `change station' command set `Survivable COR' to Y.



QUESTION 39In the function of processor Ethernet (PE) in a simplex S88XX primary is allowed for H.248 GatewayRegistration.

What is H.248 gateway registration implemented in the S88XX Server using Processor Ethernet?

A. CM Software automatically enables use of PE for H.248 Gateway registration so no other administrativeprocedure is required.

B. H.248 Registration is administered through the ip-interface procr form.C. H.248 registration is administered through the communication-interface-processor-channels form.D. CM software automatically enables use of PE for H.248 Gateway registration through the C- LAN

interface so no other administrative procedure is required.



QUESTION 40Which command displays all of the IP addresses of Ethernet Interface on the Avaya S-series Servers?

A. Netstart r"Pass Any Exam. Any Time." - www.actualtests.com 16 Avaya 6006-1 Exam

B. StatappC. Pingall aD. Ipversion all



QUESTION 41Prior to an upgrade, copying files (license, authentication, security files, service packs, circuit firmware) tothe server, sis performed in the system management Interface under Miscellaneous> download files.

After downloading files to the Avaya S8xx Server, where is the update file located?

A. /var/home/ftp/pubB. /home/ftp/update/tmpC. /home/ftp/log/updatesD. /home/user/bin/update

Correct Answer: ASection: (none)

Explanation


QUESTION 42A communication Manager 5.2.1 system has just been installed with a pair of S8730 Servers with highreliability that includes duplicated control networks. For connections to the corporate network to work inLinux the Corporate Network on each server must be activated.

Which Linux command must be executed to activate the Corporate Network on the servers?

A. can onB. cnb onC. cnc onD. cnstatus




QUESTION 43The G450 can be deployed in the LAN using port and switch redundancy configuration to provideredundancy. One of the LAN connections servers are active primary link and the other is configured to beon standby (disabled)

How the G450 Gateway Connected to the LAN is switches to ensure port and switch redundancy?

A. One connection to the external LAN switches is connected from one of the G450's Ethernet LAN portson the front panel. The other connection from one of the G450's MM316 LAN module ports.

B. One connection each to the external LAN switches is connected from both of the G450's Ethernet LANports on the front panel. No other connections are required.

C. One connection to the external LAN switches from one of the G450's Ethernet LAN ports on the frontpanel. The other from the Primary Management interface Module.

D. One connection to the external LAN switches from the S8300 services port. The other from the EthernetLAN port in the back of the G450 Gateway.



QUESTION 44Which Linux command is used to display all current TCP/IP network connections and protocol statistics?

A. pingB. ifconfigC. systemstatD. netstat



QUESTION 45An Avaya telephone user reports that his phone is out of service.

Which maintenance command shows whether the phone is attempting to communicate with its call server?


A. Status linkB. List trace rasC. Status stationD. Trace station



QUESTION 46Which field "media-gateway" forms is required for the Media Gateway to register back to the originalGatekeeper?

A. RegisteredB. Recovery ruleC. Network ruleD. Serial number



QUESTION 47When upgrading multiple components in a Communication Manager server/gateway configuration, whichspecific upgrade sequence id followed?

A. H 248 GW and supported media modules, ASPs, ESSs, Primary ServersB. Primary Servers, LSPs, ESS, H.248 media gateways and supported media modulesC. LSPs, H.248 GW and supported media modules, ESSs, Primary ServersD. Primary Servers, ESS, LSPs, H.248 GW and supported media modules



QUESTION 48The audio portion of many stable telephone calls can be preserved through the course of system upgrade.

When are upgrades on duplicated servers "call preserving?"


A. Upgrades across dot release (e.g. Cm 5.1xto CM 5.2x)B. Upgrades not including hardware updatesC. Upgrades across major release (e.g. CM 4.0xto CM 5.2x)D. Updates are including firmware updates.



QUESTION 49The ping command is used for troubleshooting.

What is the Avaya recommended maximum acceptable value for milliseconds (ms) delay when assumingVoIP quality?

A. 20 msB. 80 msC. 120 msD. 180 ms



QUESTION 50Which protocol is used to register the Media gateway G450 to gatekeeper?

A. H.323B. H.248C. H.255D. Q.931



QUESTION 51What is the procedure to upgrade a duplicated S8xxx-series server?


A. Upgrade the active first, and then upgrade the standby.B. Upgrade the standby server first, and then upgrade the active.C. Upgrade the active server first, which automatically upgrades the standby server.D. Upgrade the standby server first, which automatically upgrades the active server.



QUESTION 52A customer would like to have an additional menu language available for the 9630 phones.

Which statement describes what has to be done to provide this language?

A. A multi-language firmware package must be loaded into the 9630 phones. Provide this package on thephone's file server for download. Reboot the affected phones.

B. The menu language file is on the phone's file server. The local display language parameter has to beactivated in the 46xx settings bd file. Reboot the affected phones.

C. Go to the 9630 phone menu settings and enable the parameter Multilanguage support. Reboot theaffected phones.

D. Change the parameter display language in the station's form to user-defined. Reboot the affectedphones.



QUESTION 53During the initial configuration of a Communication Manager5.2.1 system a technician enters the wrongname for a CLAN and saves the screens.

What must be done before the name of the CLAN board can be changed/

A. Disable the interface.B. Remove the interfaceC. Reset the interfaceD. Remove the IP address from the interface.




QUESTION 54Which command verifies the firmware of the G430/450 Media Gateway?

A. DirB. ImageC. Show image versionD. list configuration firmware



QUESTION 55A customer wants to change the number of rings for all extensions in the customer's helpdesk before the

system redirects the Communication Manager Messaging (CMM) system. All extensions of the helpdeskbelong to COS 3 and coverage Path 99.

Which command must be used to change the number of rings?

A. Change coverage path 99B. Change coverage path 3C. Change cosD. Change system-parameters coverage-options



QUESTION 56Which Avaya Aura Communication Manager command shows all media module firmware?

A. Show mg listB. List configuration allC. Display media-gateway allD. List configuration media-gateway <number>


Explanation/Reference:"Pass Any Exam. Any Time." - www.actualtests.com 22 Avaya 6006-1 Exam

Explanation:

QUESTION 57Which port on the G450 Gateway is used to connect to an auxiliary device that automatically locks orunlocks a door?

A. CCAB. ETRC. ETHD. DOOR



QUESTION 58Communication Manager does not appear to be running. A technician wants to verify that all of theapplications have started and are up. There is no access through the system Management interface sologging into Linux is used to check this.

Which two Linux commands will give the output needed to verify this? (Choose two)

A. statappB. statserverC. systat

D. statuslicense



QUESTION 59Which three pieces of information does the IPSI send to Communication Manager?

(Choose three)

A. QoS parametersB. Ethernet settings

"Pass Any Exam. Any Time." - www.actualtests.com 23 Avaya 6006-1 ExamC. IP address informationD. VLAN IDE. Firmware version

Correct Answer: ABCSection: (none)Explanation


QUESTION 60A technician has a communication Manager running on S87xx server, G850 Gateway. Most of the phonesare H.323 IP 46xx and 96xx series. Upon testing, it is discovered that all the IP phones have no dial tone.All of the hardware has been verified to be working properly.

Which two steps should be taken to identify the cause of problem? (Choose two)

A. Verify that the MedPro Board has the correct IP settingsB. Set a static IP address on the laptop and see if the TN799 board can be pinged.C. Set a static IP address on the laptop and see if the TN3212 Board can be pinged.D. Set a static IP address on the laptop and see if the TN3202 or TN2602 boards can be pinged.

Correct Answer: ABSection: (none)Explanation

Explanation/Reference:Explanation:No dial tone occurs when· Connectivity between the MedPro and the IP telephone is interrupted. · Insufficient DSP resources areavailable on the MedPro. · Network Region configurations are incompatibly administered. · Duplexadministration results in a mismatch between the MedPro and the Ethernet switch. For IP Telephones,Medpro and CLAN connectivity should be checked in case of no dial tone. A refers to the Medproconnectivity and B refers to the CLAN connectivity

QUESTION 61A customer has Avaya IP phones located at a remote site connected via a remote link. The end userscomplain that intermitterently there is no audio or only one way audio when on a call. The customer limitedthe UDP port range in their routers to be 5000 to 6000.

Which command in the Avaya S87xx Server is used to find the UDP port range?


A. Status stationB. Status ip-network-mapC. Display system-parameter ipD. Display ip-network-region



QUESTION 62A technician is on initial installation and SAMP card is not working.

What is the command to verify the version of software on the SAMP card?

A. sampcmd samp-update statusB. status sampC. rest samp software-versionD. list config samp



QUESTION 63Which component is duplicated to provide a seamless redundant voice path?

A. Media ResourceB. CLANC. Media ProcessorD. Maintenance



QUESTION 64Which Ethernet port on the S8730 server is used for server duplication when using the hardware duplicationfeature (DAL 1 or DAL 2 card)?


A. Ethernet 0B. Ethernet 1C. Ethernet 2D. Ethernet 3



QUESTION 65A technician is planning to implement the processor Ethernet feature on an Avaya S8510 server that isdirectly connected to Media gateway G450.

Which three commands must be used to configure Processor Ethernet mode on the Avaya S8510 serverand to add the G450 to the server? (Choose three)

A. Type "add ip-interface procr" to add the processor Ethernet.B. Type "add media-gateway" to add the G450C. Type "enable procr" to start the processor Ethernet mode.D. Type "display system-parameters customer-options" to check if processor Ethernet mode is enabled.E. Type "change node-names-ip" to add the processor Ethernet.



QUESTION 66When administering a new Media Gateway, in which three locations is the name administered? (Choosethree)

A. In Communication Manager with the command àdd Node-Names ip'B. In Communication Manager with the command àdd Media-gateway [#]'C. In the Gateway with the command `set system name'D. In the Gateway with the CLI command `set system name'E. In the Gateway with the command `set system config'




QUESTION 67Which hardware is required to implement Avaya IP Softphone in the telecommuter mode?

A. DS 1 boardB. CLAN boardC. digital circuit boardD. media processor board



QUESTION 68Which hosts the firmware for a 9600 series telephone?

A. DHCP serverB. TFTP serverC. HTTP serverD. FTP server




QUESTION 69The S8510 has just been rebooted. A technician wants to know when it is back up, so logging back in canoccur. The laptop is connected to the services port and the technician wants to issue ping command thatdoesn't stop pinging until it is decided to manually stop it.

Which ping command should be executed?

A. Ping 192 11.13.6 aB. Ping 192 11.13.6 tC. Ping 192 11.13.6 fD. Ping 192 11.13.6 w




QUESTION 70Firmware download procedure for programmable circuit packs (eg CLAN, IPSI, MedPro) include the Self-download and the CLAN distributed download.

Which statement describes the command that is used to schedule the CLAN distributed firmware downloadprocedure?

A. In the SAT type `status firmware download'.B. Access the maintenance web interface, under ÌPSI Firmware Updates'. Click download IPSI firmware.C. In the SAT type `change firmware download'D. In the SAT type ènable filexfer'


Explanation/Reference:"Pass Any Exam. Any Time." - www.actualtests.com 28

Date post:	07-Sep-2018
Category:	Documents
Upload:	dokhue
View:	220 times
Download:	0 times

Untitled Exam - GRATIS EXAM · B. System management interface interchange Server C. Avaya Site...

Documents