7/27/2019 Upatstvo AUX Inverter

1/6

7/27/2019 Upatstvo AUX Inverter

2/6

rCONTENTS

Names and functions of the buttons -_---__- 1The opening state of remote controller-_ __-__-__lThe closing state of remote controller__ -_____-_-_3Application method -_-_-____-6Fix batteries ----- ___-_---__6Coolin glHeating operation mode-- ____-_6Drying operation mode------- ___-6Circulation operation mode------- ___-_--7Autom atic operation mode------- _-__----7Clock time setting ___--__--7Timer setting _-_---7Set the " Timer On" ___-7Set the " Timer Off" _--gSleeping operation mode ___-___-_gAttention

Iit

l

IIJ

7/27/2019 Upatstvo AUX Inverter

3/6

!!I

Fan speed displayAnion function display

Power display

Timer On/Off display:

The closing stote of remote controller:Mode display

I

Atfoc-ml Dry Heat Wet Emissiondisplay

o K+" buttonThis button can set room temperature.Press it once ,the temperature increases l C.Press it continu-ously, the temperature increases at the speed of 4Cls.This function is invalid when the appliance at the Fan andAuto mode.@ *swrNc" buttonPress the button, the rdo shows ,6" " --$ " symbol, thehorizontal airflow direction plate canadjust a.rto-utically.When you have the desired wind direction, please press itagain, the airflow direction plate will stop at the siluation.@ (FAN" buttonYou can select fan speed show as the follow:

r* Low r --+ Med f --* High f -* Auto f-@ "MODE" buttonWhich enables you to select different operation mode , aftereach pressing,the operation mode will be changed.It showsin the following display.PAUToO-> coor{!+ DRy I+FAN ->HEAr*-l- r-t.r^rr.. lRemark:cold wind type has no heating function.@ cc -tt buttonThis button can set room temperature.Press it once ,the temperature decreases I C.Press it continu-ously, the temperature decreases at the speed of 4Cls.This function is invalid when the appliance at the Fan andAuto mode.@ 'C" Button

You can start the air-conditioner by pressing this button andstop its operation by pressing it again.

bmperature displayFeeling displaySleep displayUp/Down wind displayTimer/Clock display

@@

A

o

SWING./' \

o

7/27/2019 Upatstvo AUX Inverter

4/6

The opening stute of remote controller: o"@ " buttonThis button not only can adjust clock time and the timer timebut also can set room humidity.Adjusting clock time and timer timePress it once ,the time increases one minute. Press it for 1 to3 seconds, time display will increas e atthe speed of 2min/s.For 3 to 5 seconds, it will increase at the speed of lOmin/s.For more than 5 seconds, it will increase atthe speed of 1Omin/s.@,, HEALTH,, buttonPress this button ,the LCD shows the K &" symbol, the anionemission function of the air conditioner is started.Press the button once again, The K g" symbol disappears, thefunction is cancelled at the same time.@ " SLEEP" buttonPress this button,the LCD shows the ((9" symbol, the sleepingfunction of the air conditioner is started. After 7 hours of settlngthis function ,the air conditioner will beoff automatically.Press the button onc e again, The " e"tymbol disappears, thefunction is cancelled at the same time.This function is invalid when the appliance under the Fan mode.@ "POWER" button* when it displays "POWER" button:Press this button, the fan speed reach the highest , press it againit resume the foregoing fan speed.Note: 1.This function is valid only on HEAT or COOL mode.2.After the function of power run 15 minutes, it will beautomatic exit. Then it will run in the mode which isset before the power function.Screen display settingl.Press the "POWER" for 3seconds,it will display the stateof the air conditioner through LED.. LCD.. or VFD.2.Press it for 3seconds again, it will cancel the screen display.

it

@@@@@@

ltD @

FEELN{G

7/27/2019 Upatstvo AUX Inverter

5/6

IfIit\3

',

* Fix batteries.,TIMER/CLOCK" buttonSetting the "oN/oFF" timer timeWhen remote controller is at the on/off state, Press this button ,the LCD flickers the"g"r, 19""" symbol. Press the" @"or 4 @t'button to set the timer time. After finishing it, press this buttonagain in 10 seconds to affirm. If the setting time is the same asthe current time, this setting is invalid.Press the button once more, The "O.,r/O'"" symbol disappears,the function is cancelled at the same time.Adjusting the clock timePress this button in 5 seconds Underthe state of no timer setting,the LCD flickers the"iIBffiB" symbol. Press the(@" or K@"button to set the timer time. After finishingit, press this buttonagain in 10 seconds to affirm. If not, this operation is invalid.@ "@" buttonTtris button not only can adjust block time and the timer timebut also can set room humidity.Adjusting clock time and timer timePress it once,the time decreases one minute. Press it for I to3 seconds, time display will decrease at the speed of 2minls.For 3 to 5 seconds, it will decrease at the speed of l0min/s.For more than 5 seconds, it will decrease at the speed of l0min/s.@ " i )'buttonYou can start the air-conditioner by pressing this button andstop its operation by pressing it again. '@ ,.FEELING,, button* when it displays "FEELING" button:Press this button can be used to set the feeling function.The LCD shows the actual room temperature when the functionset and it shows the setting temperature when the function cancelled.This function is invalid when the appliance at the Fan mode.

l.Slide open the cover according the direction indicated byarrowhead.2.Put into two brand new batteries (7#),position the battOriesto right electric poles (+&-).3.Put back the cover.Remark:Make sure to connect the wire to independent power* ffi ;#;-,"" .T:ff il:Jl ffi "J"o:' "(Cold wind type has no heating function)l.Press the 'O"button,the operation indicator is on,the airconditioner starts to operate the Cooling or Heating mode.Press the button again,the air-conditioner stops.2.Press the MODE button,select the Cooling or Heatingoperation mode.3.Press the 4 +" or " -" button, you can set the temperaturerange from l6C to 32"C4.Press the FAN button, you can select fan speed from"Low" ,"Med", "High" , "Auto"* Orying operation model.Press the MoDE button,select the dry mode operation.2.Press the 6( +" ot " -" button, you can set the temperaturerange from 16C to 32"C .3.Press the FAN button, you can select fan speed from" Low" , ttMedtt , ttHigh" , "Auto"

@o

7/27/2019 Upatstvo AUX Inverter

6/6

>tCirculation op eration model.Press the MODE button,select the fan operation mode.2.Press the FAN button, you can select fan speed from" !'*" , "Med" , "High"Remark: In the fan operation mode,to set the temperatureis noneffective.* Automatic operation model.Press the MODE button,select the automatic operation mode.2.Press the FAN button, you can select fan speed from"Low" ,"Med", "High", "Auto"Remark: In the fan operation mode,to set the temperatureis noneffective.* Clock time settingl.Press the TIMER/CLOCK button for 5 seconds, the timeindicator at present begins to glimmer.2.Adjust present time through pressing the 4 + " or " - "button.3.Press the TIMER/CLOCK button once again, the timesetting is finished.Remark :Time canbe regulated only after the timing mode iscancelled .* timer setting* Set the " Timer ON" (It is effpctive only when the airconditioner is shut offl.l.Press the TIMER/CLOCK button ,the remote controllerdisplay (( Oo'." immediately.2.Adjust time through pressing the (( + " or " - " button.3.Press the TIMER/CLOCK button again, the "Timer ON"setting is finished.

* Set the 'Timer OFF' . (It is effective only when the air-conditioner is running.)l.Press the TIMEWCLOCK button ,the remote controllerdisplay' @; immediately.2.Adjust time through pressing the s + o or 4 " button.3.Press the TIMER/CLOCK button again, the "Timer OFF"setting is finished.* Sleeping operation model.Press the SLEEP button,the sleeping indicator light ofindoor unit flashes on.2.After the setting of sleeping mode,the cooling operationenables the set temperature to increase 1 C after I hour andanother 1C automatically after t hour.3.Afterthe setting of sleeping mode,the heating operationenables the set temper ature to drop 2"C after t hour andanother 2"C automatically after t hour.4.The air-conditioner runs in sleeping mode for 7 hours andstops automatically.Remark: Press the MODE button or ON/OFF button,theremote controller clears sleeping mode away.

* Aim the remote controller towards the receiver on theair-conditioner .ft fft" remote controller should be within 8 meters awayfrom the receiver.* No obstacles between the remote controller and receiver.* Oott't drop or throw the remote controller.* Oon't put the remote controller under the forceful sunraysor heating facilities and other heating sources.* Ur. two 7#batteries,don't use the electric batteries.tk fute the batteries out of remote controller before stop itsusing for long.lk Wnen the noise of transmitting signal can't be heard indoorunit or the transmission symbol on the display screen doesrt'tflare,batteries need be replaced.;k ff reset phenomenon occurs on pressing the button of theremote controller,the electric quantity is deficient and newbatteries need to be substituted.>k fn. waste battery should be disposed properly.

II

o