USUS Army Corps of Army Corps of EngineersEngineers

Philadelphia District Philadelphia District

USUS Army Corps of Army Corps of EngineersEngineers

Philadelphia District Philadelphia District Working for the CorpsWorking for the Corps

Presented by Cheryl W. ChandlerPresented by Cheryl W. ChandlerMarch 11,2008March 11,2008

Small Businesses (SB)Small Businesses (SB)

The definition of a Small Business varies according to a company’s NAICS Code.

What are NAICS Codes? NAICS Codes are North American Industrial

Classification System Codes.

They determine what category a company fits into. I.E.- NAICS Code 541330 is classified as General Engineering Services (the size is $4.5 million)

Examples of NAICS CodesExamples of NAICS Codes

NAICS Code 237990 covers Other Heavy and Civil Engineering Construction. These firms must have average annual sales less than $31 million to be a SB.

NAICS Code 336611 is for Shipbuilding & Repair of Ships and to maintain their SB status, must have less than 1,000 employees.

Currently, most sizes are either revenue or employee based, although DOD wants an all employee-based system.

Small Business Set Asides (SBSA’s)

Requirements under $100K are automatically set-aside for small businesses, unless a waiver is requested and approved.

In certain designated industries, no set-asides are allowed for SBs.

All Building, Heavy and Civil Engineering Construction and Specialty Trades Contractors are included in those designated industry groups (DIGs) categories

Small Disadvantaged Businesses (SDB’s)Small Disadvantaged Businesses (SDB’s)

SDB’s are considered those firms that are at least 51% owned by one or more socially & economically disadvantaged individuals;

All 8(a)firms are SDB; not all SDBs are 8(a);8(a) firms can be awarded sole-source contracts up to$3.5M; competition amongst 8(a)s is mandatory for requirements over $3.5M

The 8(a) program is developmental vs preferential (HUBZone, SDVOSB) so firms are required to do less work with their own staff

8(a) Advantages

Awards can be made in a very short period of time

Contractors can be hand-pickedContractors are usually very responsive 8(a)’s can form a joint venture with its

mentor (often a large business) but will still be considered small for competition purposes

Women Owned (WO) and Minority Women Owned (WO) and Minority Owned (MO) Small BusinessesOwned (MO) Small Businesses

The goal for FY08 is to award 5.8% of total contract awards to WOSBs.

There are no preferences for women-owned or minority-owned small businesses.

To be either Women Owned or Minority Owned, one must have at least 51% ownership and control of the company.

Service–Disabled Veteran-Service–Disabled Veteran-Owned Small Businesses Owned Small Businesses

(SDVOSB)(SDVOSB)

Set-asides for service-disabled veteran-owned small businesses established by Executive Order 13360 on 20 October 2004.

Currently, firms can self-certify but proof of status should be provided.

The SDVOSB Program is a preference program.

Service–Disabled Veteran-Owned Service–Disabled Veteran-Owned Small Businesses (SDVOSBSmall Businesses (SDVOSB

SDVOSB requirements can be competed if there is an expectation that 2 or more responsible firms will submit an offer; if justified, sole source awards can be made.

SDVOSB have parity with HUBZone firms SDVOSB take precedence over small businesses In FY08, SDVOSB firms should receive 2% of our

total award dollars; the statutory goal is 3%

Historically Underutilized Business Historically Underutilized Business

Zones (HUBZoneZones (HUBZone))

Two Main purposes: - To increase employment. - To provide assistance for qualified SB

concerns located in historically underemployed and underutilized areas.

HZs were implemented as of FY00.

HUBZone’s are determined by the census tract.

More about HUBZone’sMore about HUBZone’s

Three eligibility criteria for a company to be HUBZone certified:

1. The company’s primary place of business must be located in a HUBZone.

2. Must have 51% ownership by one or more U.S. citizens.

3. At least 35% of the employees must live in a HUBZone.

Hubzone FactsHubzone Facts

HUBZone is a preference program In a unrestricted procurement, HUBZone firms

may be eligible for a 10% price adjustment There are set-asides for HUBzone firms If justified, HUBZone firms can be awarded

contracts up to $3.5M on a sole-source basis In FY08, the Corps’ HUBZone goal is 10.% of

total award dollars; the statutory goal is 3%

Historically Black Colleges and Historically Black Colleges and UniversitiesUniversities (HBCU’s)/Minority (HBCU’s)/Minority

Institutions (MI’s)Institutions (MI’s)

This program has been extended to include Hispanic Institutions (HIS’s), Tribal Colleges and

Universities (TCU’s), and other MI’s.

To increase opportunities for HBCU’s/MI’s to participate in and benefit from Federal programs.

To enhance their academic and research environment at both undergraduate and graduate levels.

Internet Addresses

U.S. Army Corps of Engineers website: www.usace.army.milPhiladelphia District Website:

www.nap.usace.army.milAcquisition Central: http://

www.arnet.gov/US Small Business Administration:

www.sba.govGSA (forms): www.gsa.gov

Working For The Corps

Agenda Some pointers to help you get work Tips for submitting successful

proposalsTTPP (a.k.a. KO’s top ten pet peeves)Q&A

Small Business Offices Headquarter’s Small Business Office Division Small Business Office District Small Business Offices

Corps of Engineers contracts are awarded by Districts, Laboratories and Centers. If you are a small business, the Small Business Office located at the Corps of Engineers District, Laboratory or Center nearest you can be a great resource for identifying contracting opportunities and

providing assistance on how to do business with the Corps.

Contracting Office

The Office of the Principal Assistant Responsible for Contracting (PARC) ensures that the contracting interests of the Head of Contracting Activity (HCA) and USACE are safeguarded.

They also serve Corps contracting by providing guidance, assistance, contracting automation support, training and information on acquisition related subjects to Corps contracting offices.

Working for the Corps The PARC office does NOT:

Perform operational contracting, i.e., issue solicitations or award contracts

Collect, maintain, or coordinate market research or other vendor related material

Contact the district Contracting Office in your area to find local contracts. You can check Fedbizopps for awarded contracts.

Working For The Corps

Visit the web site for the Division, District, or Laboratory with which you want to do business in order to learn about the missions and the types of services/supplies each office procures.

Working For The Corps

If you have a small or disadvantaged business, call, write or visit the Corps of Engineers Deputy for Small Business in the location of interest to you

Check out announcements of Business Opportunity Conferences, Trade Fairs and other federally attended or sponsored events in your area

Working For The Corps

Discuss your capabilities, interest and capacities to perform with the Deputy for Small Business or Contracting Office in the location of interest to you

Find information on available contracts through the FedTeds (formerly the Electronic Bid Solicitation) Web site

Working For The CorpsSome Corps websites no longer lists its

business opportunities but will provide a link to FedTeds, the site that does

Most websites link to other Corps sitesThe SB Deputy will give you information

about upcoming work prior to it being advertised

Let your contact know what you have been doing

Attend small business conferences

Working for the Corps

Register in Central Contractor Registration, www.ccr.gov

Refer to Federal Business Opportunities, www.fedbizops.gov

To obtain solicitation information, go to http://www.fedteds.gov

Working For The Corps

Provide a professional statement of qualifications to include all certifications (8(a), HUBZone, SDB, SDVOSB) & past performance information to the SBO

Tri Service Solicitation Network is maintained to assist bidders in locating solicitations offered by the US Army Corps of Engineers, Naval Facilities Engineering Command and the US Coast Guard.

10 Tips 10 Tips to Improve to Improve

Your ProposalYour Proposal

10 Tips 10 Tips to Improve to Improve

Your ProposalYour Proposal

Working for the CorpsWorking for the Corps

Tip # 1 Read the RFP thoroughly!

Ask questions early to ensure there is sufficient time to respond

Pay attention to the criteria order and weights – it indicates what is important to us

Working for the Corps

Working for the Corps

Tip #2 - Understand the Type of RFP

How will source selection be accomplished?

Lowest Price Technically Acceptable

Best Value Trade Off

Working for the Corps

Tip #3 - Address all aspects of the Criteria

Create a matrix of Section 00100 or the Scope of Work, by paragraph, with each requirement to use as a checklist to ensure your proposal is complete.

Include your checklist with your proposal.

Working for the Corps

Tip #4 - Be succinct

Avoid being too wordy

Use bullets, underlines, bolding

When a limited page count is provided – stick to it!

Working for the Corps

Tip #5 - Your experience should relate to the project in terms of scope, size, $ value, complexity

Should be recent – within the past 5-10 years or as required by RFP

Be clear – is it experience of firm or people? Or, is it experience of subcontractor

or mentor?

Working for the Corps

Tip #6 - Make sure qualifications of staff match RFP

Ensure each team member’s qualifications address EACH ASPECT of the criteria

List relevant experience of team membersEnsure team members are available

Working for the Corps

Tip #7- Organization Chart – Who’s in Charge?

Identify one person to be in charge of entire team

Person should be from YOUR company, not a subcontractor or your mentor

Indicate clear lines of communication

Identify person and company (with location) for each role

Working for the Corps

Tip # 8 - Address QualityInclude the quality team on the

Organization Chart – even if not required

Quality is important to us – indicate it’s important to you

Show/describe how the quality control team interacts with the execution team

Working for the Corps Tip #9 - Address Performance

Problems Head-OnGet copies of your Construction Contractor

Appraisal Support System (CCASS) evaluations.

Explain any “Marginal” or “Unsatisfactory” items within the evaluation as well as overall ratings.

Check out the past performance of your proposed subcontractors.

Working for the Corps

Tip #10 - QC your ProposalHave an independent reviewer ensure all

items are addressed (someone not involved in putting the proposal together).

If you copy another proposal, make sure you only refer to the current project.

Uze spel cheque!

Working for the CorpsWorking for the CorpsWorking for the CorpsWorking for the Corps

The Contracting Officer’s The Contracting Officer’s Top Ten Pet PeevesTop Ten Pet Peeves

Working For the Corps KO’s Top Ten Pet Peeves:KO’s Top Ten Pet Peeves: #10 Calling multiple times or calling around office for a different answer #9 Not paying subcontractors #8 Going over the KO’s head #7 Superman (or Wonder Woman) Syndrome

#6 Not reading proposals before asking

questions

KO’s Top Ten Pet Peeves:KO’s Top Ten Pet Peeves:Cont.Cont.

#5 Rounding $ amounts in proposals and/or

mathematical errors#4 Trying to market items that the agency doesn’t buy#3 Asking what can you do for me? #2 Misleading comments or lying

#1 Unannounced visits

My e-mail address:

cheryl.w.chandler@usace.army.mil

Phone number: 215-656-6867

Questions?