Pri
ce
s 2
015
US Order and Pricing Information,
valid from April 1, 2015 until March 31, 2016
The-Safety-Valve.com
PricesPrices
The-Safety-Valve.com
10615 Texland Boulevard, Suite 100
Charlotte, NC 28273, USA
Fon +1 (704) 587-3670
Fax +1 (704) 587-3672
LESER LLC E-Mail: [email protected]
www.leser.com
US
0777.5460Edition April 2015/4,000
20152015
LESER worldwideLESER worldwide
LESER USA
Charlotte (NC) [email protected]
LESER Germany
Hamburg [email protected]
LESER France
LESER China
Tianjin, Beijing, Shanghai and [email protected]
LESER Singapore
LESER India
Mumbai and [email protected]
LESER Bahrain
LESER Brazil
Rio de [email protected]
LESER stock and local assembly
LESER representative
LESER UK
Bristol, United [email protected]
André Ramseyer AG
Flamatt, [email protected]
LESER Polska
Poznan, [email protected]
ContentsContents
Page
General
The Company 4
Spotlight 5
News 6
Valve finder 14
How to use 15
Glossar – LESER Option codes 17
How to order 38
Compact Performance 40
Safety Relief Valve 437, 437 Long version 42
Safety Relief Valve, O-ring-disc 438, 438 Long version 43
Safety Relief Valve, vulcanized soft seal
439 44
Overview connections • Threaded – NPT, G/BSPP• Flanged – ANSI
Series 437 45
Safety Relief Valve 459 46
Safety Relief Valve, O-ring-disc 462 48
Safety Relief Valve 459 Heavy duty design 50
Overview threaded connections NPT, G/BSPP
Series 459 52
Overview flanged connections ANSI
Series 459 53
Spare parts Series 437 54
LESER Original Spare Parts Kits Series 459, 462 56
Spare parts Series 459 57
Soft seal selection Series 437, 459 59
Available options Series 437, 459 60
Page
API 61
Safety Relief Valve 5262 WCB 62
Safety Relief Valve 5264 CF8M 64
Safety Relief Valve 5267 WC6 66
Safety Relief Valve 5263 LCB 68
Safety Relief Valve 526X SAFUREX 70
Options Series 526 71
Sour gas service – NACE Series 526 74
Outlet flange rating class 300 Series 526 76
Flange facings Series 526 78
Weights Series 526 79
Flange drillings acc. to DIN Series 526 80
LESER Original Spare Parts Kits Series 526 82
Spare parts Series 526 83
Soft seal selection Series 526 97
Available options Series 526 98
API High Performance
Compact
Performance
High Efficiency 99
Safety Relief Valve WCB 8112 – Pop Action 100
Safety Relief Valve CF8M 8114 – Pop Action 102
Safety Relief Valve LCB 8113 – Pop Action 104
Options 811 106
Safety Relief Valve WCB 8212 – Modulate Action 110
Safety Relief Valve CF8M 8214 – Modulate Action 112
Safety Relief Valve LCB 8213 – Modulate Action 114
Options 821 116
Weights 811, 821 120
Flange drillings 811, 821 122
Flange facings 811, 821 123
Inspections, Certificates 811, 821 123
LESER Original Spare Parts Kits 811, 821 124
Available options 811, 821 128
High Efficiency
2 199
Se
rvic
e
Sizing software for safety valves
VALVESTAR®, the sizing program for safety valves developed by LESER, supports all leading worldwide codes and standards. In addition to calculations and sizing, the program provides user-designed and configurable individual reports for technical documentation and archiving. VALVESTAR® is unique in form, functionality and quality.
Program highlights
Sizing:
• Sizing of safety valves according to leading worldwide codes and standards such as: API 520, ASME VIII, ISO 4126, AD 2000-Merkblatt A2
• Calculation of two-phase flow in accordance with API 520 Appendix D ( -method) and fire case in accordance with API 521
• Evaluation of inlet pressure drop, built-up back pressure in pipework, reaction forces and noise levels
Reports:
• Multiple report types, e.g. project report, single page report
• Customizable design of report layouts (company logo, address etc.)
• Variety of data export formats, e.g. XLS, RTF, PDF, etc.
• Integrated material part lists and sectional drawings for all LESER safety valves
Design and handling:
• A user friendly Wizard function leads user step-by-step through the calculations
• Microsoft .Net based architecture offers the latest graphical user interface for easy handling and enhanced performance
Settings:
Customizable user interface:
• User specified profile settings with preselection of units, calculation methods etc.
• More than 15 available languages
VALVESTAR® Web:
• Online calculation for safety valves and projects at www.valvestar.com without any software installation
VALVESTAR®VALVESTAR®
LESER GmbH & Co. KG20537 Hamburg, Wendenstr. 133-13520506 Hamburg, P.O. Box 26 16 51
Fon +49 (40) 251 65-100Fax +49 (40) 251 65-500
E-Mail: [email protected]
VALVESTAR®VALVESTAR®
The-Safety-Valve.com
For free
3
ContentsContents
Clean Service 147
Safety Relief Valve, small capacity
481 148
Safety Relief Valve, small and medium capacity
483 149
Safety Relief Valve 484 150
Vessel flange, dead space free 5034 151
Safety Relief Valve 485 152
Integrated pipework connection, dead space free
5034 153
Safety Relief Valve, high capacity
488 HyTight 154
Spare parts Series 48X 156
Available options Series 48X 160
Page
Critical Service 161
Safety Relief Valve, fully PTFE-lined
447 162
Available options 447 164
Modulate Action 165
Safety Relief Valve 431, 433 166
LESER Original Spare Parts Kits Series 433 167
Available options Series 433 168
Series 310 169
Change-over valve 310 170
Contacts & Services 178
Coating systems, Corrosion protection 180
Marking 182
LESER Certificate for Global Application 184
Specific testing 186
Overview tightness test 188
Material test certificate 190
Test and Certificates 191
Springs 192
Availability from Charlotte stock 193
Delivery times – API Availability 194
Delivery / Shipping information 195
Delivery times 196
US Prepaid Freight Charges 197
Contact, Ordering and Delivery 198
VALVESTAR® 199
Change-over valve
Clean Service
Critical Service Modulate Action
Page
High Performance 129
Safety Relief Valve 441, 442 ANSI 130
Safety Relief Valve 441, 442 XXL 132
Safety Relief Valve 441, 442 DIN 134
Safety Relief Valve 444 ANSI 136
LESER Original Spare Parts Kits Series 441, 442 DIN/ANSI 137
Flange drillings Series 441 138
Flange facings Series 441 139
Safety Relief Valve Series 457, 458 140
Spare parts Series 441 142
Spare parts Series 441 XXL 144
Available options Series 441, 458 146
4
The CompanyThe Company
With more than 800 employees, LESER is the largest manufacturer of safety valves in Europe and a leader in its market worldwide.
LESER safety valves are used by leading companies in industries such as chemical, petrochemical, industrial gases, oil and gas production, and machine building, as well as the food and pharmaceutical industry. LESER offers spring-loaded and pilot-operated safety valves for all industrial applications according to PED and ASME VIII as well as application-based solutions for special requirements.
LESER safety valves are developed for the international market at our headquarters in Hamburg/Germany and manufactured at our modern factory in Hohenwestedt/Germany. In addition, LESER India produces safety valves for the local market. Eight subsidiaries in Europe, America, the Middle East, and Asia, as well as authorized and trained representatives in over 80 countries guarantee competent consulting and quick, reliable delivery.
After supporting the North American market for over 15 years, LESER opened its operations in Charlotte, North Carolina in 2007. LESER US has a fully established sales, distribution, and service network which includes its own stocking, setting, testing, and assembling facility. LESER can supply high quality ASME code-stamped valves from North America into South America for a full range of applications.
Since its opening, LESER US has enjoyed signifi cant growth due to a combination of its broad product range, unique design features and committment to customer service. This growth has enabled the expansion of its representative network and LESER Authorized Repair Centers (LARCs) to support local customer requirements. In addition, LESER US has added to its infrastructure, inside sales personnel to support day-to-day and project business, as well as outside sales expertise through its Sales Market Development staff.
LESER GmbH & Co. KG and LESER US
Safety valves
for every industrial application:
• API
• High Effi ciency
• Compact Performance
• Critical Service
• Clean Service
• High Performance
• Modulate Action
• Best Availability
ProductRange
ProductRange
UV
1885
Complete range of steam fi ttings, incl. safety valves
1957
First test lab for safety valves
1980s
Leading supplier for safety valves in Europe
1994
Test lab receives ASME certifi cation (fi rst and only outside of the US)
2003
Launch of the API Series
2015
Pilot Operated Safety Valve assembly at LESER US
1818
Founded as a brass foundry in Hamburg,Germany
1943
Destruction of the plant, relocation and founding of new factory in Hohenwestedt, Germany
1970s
Specialization in safety valves
1990
First ASME approval
1998
First subsidiary founded
2010
Launch of the Pilot OperatedSafety Valve
Timeline
5
SpotlightSpotlight
“High Performance” Staff
All LESER US employees have a high level of expertise and are dedicated to LESER´s corporate values of providing precise, committed, and efficient support to its customers. From sales consulting to technical support, LESER employees strive to provide the highest level of customer service in the industry.
Complete Coverage
LESER US is responsible for geographical territories that include all of North America, Central America, and the northern part of South America including Peru, Ecuador, Colombia and Venezuela. Throughout these 14 countries, LESER sells its products through an extensive network of 31 highly-trained Representative organizations, operating from over 90 different offices.
Fast & Reliable Delivery from Local Stock
LESER US carries over $6 Million in inventory of valves and parts at its Charlotte, North Carolina facility. This stock enables LESER to supply safety relief valves in one week or less with same-day service for spare parts. The after-hours service provides 24-hour accessibility in support of plant emergencies, ensuring same-day shipment of valves or parts as needed.
Growth
LESER US recently expanded its facility by 40% to over 17,000 square feet. The additional space allows for expanded inventory capabilities, a new location for incoming goods receipt and processing, and additional testing capability to support Pilot Operated Safety Valve (POSV) assembly from local stock.
LESER US in Charlotte, North Carolina
Ge
ne
ral
6
LESER US is now stocking Pilot Operated Safety Valves (POSVs) so it may better support customers by setting, testing, and assembling these products locally, shipping within one week from Charlotte. POSVs are available in both modulating and pop-action design to meet a variety of application requirements. The lower weight and compact size make these valves an ideal option for offshore platforms. Tighter to set point with the ability to handle higher backpressures, Pilot Operated Safety Valves provide an alternative for customers where spring loaded valves are unable to support the application.
LESER´s unique design eliminates external tubing by incorporating pathways through the top plate of the valve. Accessories including fi lters, fi eld test capability, manual blowdown, etc. provide fl exibility to support various applications. Due to its modular design, LESER US is able to stock a broad range and quantity of valves and accessories to support market demand. Spare parts and LESER Original Spare Parts Kits are available from stock as well.
LESER has partnered with W&O Supply, Inc., a global supplier to the marine and upstream oil and gas markets, in an exclusive distribution agreement to bring its safety relief valves to the United States and Canada maritime industries. This partnership is a natural fi t for LESER, as W&O is equally committed to meeting customer needs, providing the highest quality product, and delivering fi rst-rate customer support. The LESER and W&O partnership will prove benefi cial to customers for numerous reasons, including: short delivery times due to high stock of raw material and fi nished goods at the LESER facility in Charlotte, North Carolina, a variety of solutions from eight product groups including 40 safety relief valve types, and specialized maritime industry expertise in the fi eld.
Serving a wide range of customers, W&O operates a network of 17 strategically-located branches in the United States and Canada from its corporate headquarters in Jacksonville, Florida. These locations are powered by over 70 salespeople, providing unrivaled support in the maritime industry.
What´s New at LESER US?
Ge
ne
ral
NewsNews
Assembly of Pilot Operated Safety Valves
Specialized Maritime Industry Support
7
What´s New at LESER US?
Many end-users require local authorized repair support for LESER products sold into their plants as a means of ensuring proper servicing of their valves. This is precisely why LESER US has established a strong network of LESER Authorized Repair Centers (LARCs). A LARC is defi ned as an organization authorized by LESER to repair and adjust LESER safety relief valves.
Each LARC has had their facility visited by LESER Management for site review and has sent valve technicians to the annual Maintenance Seminar in Charlotte, North Carolina. With the network of LARCs continuing to grow, the end-user has access to authorized, reliable, and convenient local support for the repair of their installed base. Some of LESER´s repair centers even offer in-line testing for verifi cation of set pressure so there is no lapse in plant production.
For a complete listing or to fi nd your local LESER Authorized Repair Center, please visit www.leser.com (All Contacts > LARC tab).
LESER is the only safety relief valve manufacturer to offer pre-confi gured Spare Parts Kits for most valve types. The LESER Original Spare Parts Kits contain all the parts recommended for the regular maintenance of a LESER safety relief valve. The kits are individually packaged, include instructions for identifying and allocating the individual parts, and can be ordered with just one article number. The facility in Charlotte maintains a large inventory of kits and all Representatives carry local stock of these as well.
Ge
ne
ral
NewsNews
“Who repairs your valve?” After-Market Support
from Canada to Peru
LESER Original Spare Parts Kits
8
NewsNews
LESER is expanding possible applications for their “High Effi ciency” product group, now offering the entire pressure range defi ned in API 526. Other confi gurations for special applications beyond the API are available. De-liveries will commence in spring 2015.
LESER will then provide the full range of pressures for all systems that are specifi ed according to the API, not only for spring-loaded safety valves, but also with pilot ope-rated ones. LESER is one of the few manufacturers for a wide range of pilot operated and spring-loaded safety valves – and therefore an interesting supplier for large-scale industrial projects.
The extended range of the 820 series offers overpressure protection at high back pressures and maximum leak tightness up to the set pressure; it also prevents media losses and protects the environment. Back pressure resi-stance of up to 70% is important in applications in the oil and gas industry with closed blow-off systems.
Due to their robust design, with pathways for operation integrated through the top plate, they need about 20% less construction room than older models available on
the market – an advantage especially in cramped spaces. Compared to spring-loaded valves, they are often lighter and less sensitive to vibrations.
Options and accessories enable application-specifi c con-fi gurations. For example, stellited discs are more suitable at high pressures and elevated temperatures. The use of a nozzle is appropriate for corrosive media.
The comprehensive sealing concept provides optimal tightness adapted to pressure, nominal width and temperature. This includes seals which are resistant to explosive decompression (ED).
You can learn more about pilot operated and spring-loaded safety valves, as well as application-based safety solu-tions on pages 99 – 128 or http://www.leser.com/en/tools/safety-valve-tutorial/pilot-operated-safety-valve-from-leser.html
LESER extended pressure range for Pilot Operated Safety Valves
to 426 bar / 6170 psig
Type 810 Design for high pressures up to 256 bar / 3,705 psig
Type 820 Design for high pressures up to 426 bar / 6,170 psig
Type 810 Pilot Operated Safety Valve
What´s New at LESER worldwide?
Ge
ne
ral
9
NewsNews
Ge
ne
ral
LESER VALVESTAR® 7.3.0 available soon:
Sizing and selection now possible for Pilot Operated Safety Valves
with pressures up to 426 bar / 6170 psig
LESER has completed the new VALVESTAR® version 7.3.0. For years VALVESTAR® has been used for simple and safe sizing based on the most commonly internatio-nally used calculation standards. Version 7.3.0 includes the following improvements:
New products: Pilot Operated Safety Valves for pres-
sures up to 426 bar / 6170 psig
LESER now covers the entire API 526 pressure range for Pilot Operated Safety Valves (POSV). This allows users to select up to PN 400 / CL2500 or 426 bar / 6170 psig in VALVESTAR® 7.3.0 from a POSV product range.
New project overview and ISA documentation
The documentation options in VALVESTAR® have been adjusted. The ISA data sheet has been set out in the structure of the internationally renowned ISA Form S20.53 and can be used for individual as well as entire project documentations. The SAPPL template is another type of documentation that has been created to provide a simple overview of entire projects which makes it easier for LESER partners to transmit valve data to LESER.
Language addition
Chinese has been introduced as a new language in VALVESTAR® 7.3.0. Chinese users can now use the sys-tem in their national language.
Product data
The product database has been revised. It now contains current changes to the approval data, supplements to the product data resulting from the completion of the POSV series, among other changes.
Improved handling
An important change for large project inquiries with sub-sequent adjustments was implemented with the intro-duction of a variable “ambient pressure”. Time-consu-ming recalculations are no longer required as the ambient pressure can be changed for existing confi gurations.
Get the latest version for free www.leser.com/en/services/valvestar. Following possibilities canbe found on the LESER website:
• Update your version to VALVESTAR® 7.3.0 (requires version 7.2.3)
• Download VALVESTAR® 7.3.0 as a program
LESER has provided information on its availability at www.leser.com and via LESER-NEWS.
LESER GmbH & Co. KG
20537 Hamburg, Wendenstr. 133-13520506 Hamburg, P.O. Box 26 16 51
Fon +49 (40) 251 65-100Fax +49 (40) 251 65-500
E-Mail: [email protected]
®®
Version 7.3.0
VALVESTARVALVESTAR
The-Safety-Valve.com
What´s New at LESER worldwide?
10
NewsNewsG
en
era
l
High seas, coastal industry, salty air: the new corrosion protection system in accordance with ISO 12944 C5M (Level 3) means that LESER safety valves can also be used in harsh offshore environments.
LESER provides a complete package for maximum cor-rosion protection; from the initial consulting, and design through to the monitoring of the coating activities and the standard requirements, as well as the associated tests and documentation. All surface pre-treatment proce-
dures as well as the implementation of the coatings and tests are performed internally by LESER. The process is FROSIO certifi ed. The Level 3 coating system meets the leading international standards for coatings in accor-dance with EN ISO 12944 for C5-M as well as NORSOK M-501 and provides seamless quality assurance.
LESER provides various solutions for applications that require special external corrosion protection for safety valves:
Your benefi ts
• FROSIO certifi ed corrosion protection process• Complies with international standards ISO 12944 C5M
and Norsok M-501• LESER safety valves can also be used in harsh offshore
environments thanks to the maximum corrosion protec-tion level C5M.
• In-house pre-treatment, coating and testing provides process certainty and short delivery times
• Complete documentation of the systems and process conditions
More information is provided on pages 180 and 181.
You can use these option codes to order corrosion protection in accordance with ISO 12944 C5M (Level 3):
The LESER standard coating system
(Level 1) includes a primer that provides basic protection against corrosion.
The LESER corrosion protection coa-
ting based on ISO 12944 C4 (Level 2) is suitable for use in industrial and coastal areas with moderate exposure to salt and in chemical plants.
With the highest corrosion protec-
tion in accordance with ISO 12944
C5M (Level 3), this coating system is ideal for use in offshore areas with a high exposure to salt and buildings with almost constant condensation or signifi cant contamination.
Effective corrosion protection with application-based
coating systems
Documentation and testingOption
code
Dry fi lm thickness test (DFT) acc. to EN ISO 2808 and ISO19840Inspection certifi cate 3.1 acc. to DIN EN 10204
P84
Holiday Test acc. to NACE SP0188 (Porosity)Inspection certifi cate 3.1 acc. to DIN EN 10204
P83
Adhesion Test (Pull Off Test) acc. to EN ISO 4624Inspection certifi cate 3.1 acc. to DIN EN 10204
P82
Adhesion Test (Cross-Cut Test) acc. to EN ISO 2409Inspection certifi cate 3.1 acc. to DIN EN 10204
P81
Corrosion protection by protective coating system certifi cat FROSIO Level II including Level I from LESER inclusive dry fi lm thickness test, adhesion test and holiday test; Inspection certifi cate 3.1 acc. to DIN EN 10204
P80
Corrosion protection by protective coating system certifi cat FROSIO Level III from 3rd Party inclusive dry fi lm thickness test (DFT), adhesion test and holiday testInspection certifi cate 3.2 acc. to DIN EN 10204
P79
Corrosion protection coating
(depending on the valve materialand temperature)
Option
code
Corrosion protection by protective coating systems similar to C5M (ISO 12944) and Norsok Standard M-501 for carbon steel (120 °C to 540 °C) in alumi-num acc. to LID 1608.08
P85
Corrosion protection by protective coating system acc. to C5M (ISO 12944) and Norsok Standard M-501 for carbon steel (-50 °C bis 120 °C) in RAL 5005 acc. to LID 1608.09
P86
Corrosion protection by protective coating sys-tems high temperature (120 °C to 540 °C) similar to C5M (ISO 12944) and Norsok Standard M-501 for stainless steel in aluminum acc. to LID 1608.10
P87
Corrosion protection by protective coating system acc. to C5M (ISO 12944) and Norsok Standard M-501 for stainless steel (-50 °C bis 120 °C) in RAL 5005 acc. to LID 1608.11
P88
Corrosion protection by protective coating sys-tem for cryogenic tempeture (-196 °C to -50 °C) similar to C5M (ISO 12944) and Norsok Standard M-501 for stainless steel in RAL 5005 acc. to LID 1608.12
P89
11
NewsNews
Ge
ne
ral
Compact Performance Series 459: Standardization and enhanced
areas of application
Thermal expansion, compressors, technical gases and more – the safety valves in the Compact Performance 459 product group are extremely versatile thanks to their compact dimensions and a large selection of fl ow dia-meters, seals and connections.
This product group, which is in high demand by OEMs and plant operators, is continuously adapted to applica-tion-based requirements and new production technolo-gies. This allows LESER to expand the application limits and provide more effi cient solutions.
The following innovations will be introduced on 1 April 2015 for the 459, 459 HDD, 462 and 462 HDD types in the 459 series:
Deep-drawn stainless steel will be replaced by
investment cast stainless steel
The deep-drawn production process has been com-pletely converted to investment casting for types 459 and 462. This change allows LESER to offer equivalent material at a lower price. The deep-drawing process al-ways involved a welding step for the outlet body. These weld seams are no longer required in investment ca-sting, which means that additional testing requirements are no longer required. The deep-drawing applications will be completely replaced by investment casting.
Nodular cast iron will be replaced by cast steel
The optimized design of the bonnet and the outlet body necessitated a change in material from nodular cast iron to cast steel for types 459 and 462. Cast steel is also a higher-quality material. The areas of application of the nodular cast iron variations will be covered by cast steel variations 4592 and 4622 without exception.
Nodular cast iron safety valves 4593 and 4623 will be discontinued at the end of 2015. The outlet body for the-se valves is already constructed using cast steel 1.0619/WCB. Nodular cast iron 0.7043/Ductile 60-40-18 will continue to be used for the bonnet until this runs out.
Special materials available in investment casting
The continuous development of production processes and suppliers means that special materials for the outlet body – such as Hastelloy, Duplex and Monel – are now available in precision casting and are no longer machined from bar material. This means that, in the future, valves made from special materials can be delivered based on the more effi cient standard design with cast body, provi-ded the maximum set pressures are not exceeded. The Heavy Duty Design (HDD) design previously used is no longer required in this case.
This rectifi es the previously overlapping pressure ranges between the standard design and the HDD design. For Compact Performance safety valves with fl ow diameter d0 9, standard types 459 and 462 cover the pressure range up to 3625 psig, while high pressure versions 459 HDD and 462 HDD are used for higher pressures. The HDD version with fl ow diameter d0 13 is no longer available, as this range of application is completely co-vered by the standard types.
Heavy duty design: Stainless steel bar material to
be replaced by investment casting
The production process has also been optimized for the heavy duty design (HDD) for high pressures. In the future, types 459 HDD and 462 HDD will be available as investment casting designs. This includes a change in the stainless steel material from 1.4404 to 1.4408, a new look for the safety valves and new article numbers. The other options used to equip HDD valves for high pres-sures will remain unchanged.
12
NewsNewsG
en
era
l
Type 459 Heavy duty design
Actual Orifi ce diameter d0 [mm] 6 9 13
Actual Orifi ce area A0 [inch2] 0.044 0.099 0.206
Changes in HDD [from 01.04.2015] old new old new old new
Outlet body SolidInvestment
castingSolid
Investment casting
Solid Type 459 Invest-ment casting
H2 Art. No. 4594. 2532 2132 2582 2142 2592 2172
H4 Art. No. 4594. 2534 2134 2584 2144 2594 2174
p [psig] S/G/L 6091 – 12325 6091 – 12325 22 – 6090 3626 – 6090 3 – 2900 3 – 2900
Type 459
Actual Orifi ce diameter d0 [mm] 9 13 17.5
Actual Orifi ce area A0 [inch2] 0.099 0.206 0.373
Replacement deep-drawn [from 01.04.2015] old replaced by old replaced by old replaced by
Outlet body deep-drawnInvestment
castingdeep-drawn
Investment casting
deep-drawnInvestment
castingH2 Art. No. 4594. 2552 2162 2562 2172 2572 2182
H4 Art. No. 4594. 2554 2164 2564 2174 2574 2182
p [psig] S/G/L 22 – 3625 22 – 3625 3 – 2900 3 – 2900 3 – 1450 3 – 1450
Replacement ductil [from the end of 2015] old replaced by old replaced by old replaced by
Outlet body Ductile Cast steel Ductile Cast steel Ductile Cast steelH2 Art. No. 4593.2502 4592.2472 4593.2512 4592.2482 4593.2522 4592.2492H3 Art. No. 4593.2503 4592.2473 4593.2513 4592.2483 4593.2523 4592.2493H4 Art. No. 4593.2504 4592.2474 4593.2514 4592.2484 4593.2524 4592.2494
p [psig] S/G/L 22 – 10001) 22 – 3625 3 – 10001) 3 – 2900 3 – 10001) 3 – 1450
Summary of the improvements
If you previously ordered Compact Performance safety valves made from nodular cast iron, please select carbon steel. If you previously ordered Compact Performance safety valves made from deep-drawn stainless steel, please select investment cast stainless steel.In addition, the part numbers of all HDD valves change by switching from bar material to an investment casting
New product structure for Compact Performance Series 459
Type 459, 462 459, 462 459 HDD, 462 HDD
Material Cast steel Stainless steel, special materials Special materials
Casting process Investment casting Investment casting Investment casting
d0 6 – – 6091 – 12325 psig (459 HDD)
d0 91.5 – 250 psig (459)7 – 3625 psig (462)
22 – 3625 psig (459)7 – 3625 psig (462)
3626 – 6090 psig (459 HDD3626 – 5075 psig (462 HDD)
d0 133 – 2900 psig (459)7 – 2610 psig (462)
3 – 2900 psig (459)7 – 2610 psig (462)
–
d0 17.53 – 1450 psig (459)7 – 1340 psig (462)
3 – 1450 psig (459)7 – 1340 psig (462)
–
Change Cast steel replaces nodular cast ironInvestment casting replaces deep-drawn design
Pressure limit from which the HDD design is required is increased
Customer benefi t Cast steel is a higher-quality materialLower prices
No weld seamsMore effi cient solution for special materials < 250 bar
1) The design of Type 4593 is permitted with limitations acc. to ASME-Code Sec VIII, Div. 1, UCD-2, UCD-3. Type 4593 shall not be used for lethal substances, irrespective of their state of aggregation.
13
NewsNews
Ge
ne
ral
Type 462 Heavy duty design
Actual Orifi ce diameter d0 [mm] 9 13
Actual Orifi ce area A0 [inch2] 0.099 0.206
Changes in HDD [from 01.04.2015] old new old new
Outlet body Solid Investment casting SolidType 462
Investment castingH2 Art. No. 4624. 2252 2152 2272 2202
H4 Art. No. 4624. 2254 2154 2274 2204
p [psig] S/G/L 7 – 5075 3626 – 50752) 7 – 2610 7 – 1480
Type 462
Actual Orifi ce diameter d0 [mm] 9 13 17.5
Actual Orifi ce area A0 [inch2] 0.099 0.206 0.373
Replacement deep-drawn [from 01.04.2015] old replaced by old replaced by old replaced by
Outlet body deep-drawnInvestment
castingdeep-drawn
Investment casting
deep-drawnInvestment
castingH2 Art. No. 4624. 2952 2192 2962 2202 2972 2212
H4 Art. No. 4624. 2954 2194 2964 2204 2974 2212
p [psig] S/G/L 7 – 3625 7 – 3625 7 – 2610 7 – 2610 7 – 1340 7 – 1340
Replacement ductil [from the end of 2015] old replaced by old replaced by old replaced by
Outlet body Ductile Cast steel Ductile Cast steel Ductile Cast steelH2 Art. No. 4623.2902 4622.3772 4623.2912 4622.3782 4623.2922 4622.3792H3 Art. No. 4623.2903 4622.3773 4623.2913 4622.3783 4623.2923 4622.3793H4 Art. No. 4623.2904 4622.3774 4623.2914 4622.3784 4623.2924 4622.3794
p [psig] S/G/L 7 – 10001) 7 – 3625 7 – 10001) 7 – 2610 7 – 10001) 7 – 1340
1) The design of Type 4623 is permitted with limitations acc. to ASME-Code Sec. VIII, Div. 1, UCD-2, UCD-3. Type 4623 shall not be used for lethal substances, irrespective of their state of aggregation.
2) The pressure range 7 – 3625 psig is now covered by the standard Type 462 (Articel number 4624.2192 and 4624.2194).
14
Product group
Valve finderValve finder
No
No
No
No
No
Critical ServiceCritical Service
Clean ServiceClean Service
BestAvailabilityBestAvailability
Med
ium
-co
ntro
lled
Cha
nge-
over
val
ve
Bur
stin
g di
sc
Spr
ing
load
ed
Saf
ety
Rel
ief V
alve
s
High operating to set pressure ratio, high backpressure or low total height?
Clean Service application?
Critical Service / highly corrosive application?
API specified application?
Products other thansafety valves
Steam, gas and liquid application with low capacity in relation
to valve size?
High PerformanceHigh Performance
APIAPI
Compact PerformanceCompact Performance
ModulateActionModulateAction
HighEfficiencyHighEfficiency
Orifice ≥ F
Yes
Yes
Yes
Yes
Yes
Yes
Orifice ≤ F
Required Orifice letter?
Ge
ne
ral
15
No. Description Example
Valve code 4814
Price (in US-Dollar) $1,308
Pressure range/Set pressure 3 – 710 (740)
3 – Minimum set pressure
710 (740) 710: Maximum set pressure
(740): Maximum set pressure with special spring
( additional price and longer delivery time)
Approval
(S: Steam, G: Gases, L: Liquids)S/G/L
Option O-ring-disc
Option code J21
Price for option (in US-Dollar) $120
Material code 2
Article Number + + 4412.4814
How to useHow to use
15
Order code
Article Number Set pressure1) Connections Options Documentation Code and Medium
4412.4814 70 psig H64 J21 H01 L30 1.1
Explanations Type 441, 442 ANSI
No. Description Example
Type (without material identification no.) 441
Valve size 1" x 2"
Actual Orifi ce diameter d0 [mm] 23
Actual Orifi ce area A0 [inch2] 0.644
Weight [lb] 22
Body material WCB
Bonnet closed
Lifting device H4
– H2 Screwed cap
– H3 Plain lever
– H4 Packed lever
– (H8 Pneumatic lifting device)
1
2
3
4
5
6
7
8
9
1 16 9
12
13
14
15
16
17
10
11
High PerformanceHigh Performance
Type 441, 442 ANSI
Valve size 1" x 2" 11/2" x 2" 11/2" x 21/2" 2" x 3" 3" x 4" 4" x 6"
Actual Orifi ce diameter d0 [mm] 23 29 37 46 60 92
Actual Orifi ce area A0 [inch2] 0.644 1.024 1.667 2.576 4.383 10.304
API Orifi ce designation F G H K L P
API Orifi ce area A0 [inch2] 0.307 0.503 0.785 1.838 2.853 6.380
Weight [lb] 22 29 35 49 73 165
Body material: WCB
CL300
Bonnet
closed H2 Art. No. 4412. 4812 4822 4832 4842 4862 4872
$1,203 $1,356 $1,632 $2,198 $2,928 $4,804
H3 Art. No. 4412. 4813 4823 4833 4843 4863 4873 $1,251 $1,443 $1,719 $2,284 $3,046 $4,923
H4 Art. No. 4412. 4814 4824 4834 4844 4864 4874 $1,308 $1,528 $1,806 $2,371 $3,201 $5,078
Bonnet
open H3 Art. No. 4422. 4815 4825 4835 4845 4865 4875
$1,251 $1,443 $1,719 $2,284 $3,046 $4,923
p [psig] S/G/L 3 – 710 (740) 3 – 695 3 – 665 3 – 715 3 – 580 3 – 350
Options Type 441, 442 ANSI
Special machining of fl ange per fl ange $172 $172 $172 $172 $275 $275 Disc 316L L44 $62 $86 $86 $86 $138 $172
NBR “N” J30 $120 $155 $155 $155 $275 $447 O-ring-disc CR “K” J21 $120 $155 $155 $155 $275 $447
EPDM “D” J22 $120 $155 $155 $155 $275 $447
7
17
Ge
ne
ral
1) For minimum and maximum set pressure refer to API Catalog.
13 14 15
1
11b
6
8
12 11a
10
9
2
3
4
5
16
16
How to useHow to use
General signs and symbols for options
This option is covered by standard design
Not applicable
Possible
Not possible
Sign and symbols for fl ange drillings and facings
Standard design, no option code required
Flange drilling / Flange facing is not possible
Flange dimensions except fl ange thickness are in accordance with fl ange standard (e. g. ASME B16.5). Flange thickness is smaller (max. 2 mm), see “Multiple pressure rating”.
Option code for fl ange drilling and dimension, e. g. H50
H50
Flange drilling as specifi ed in fl ange standard. Outer fl ange diameter, fl ange thickness and height of fl ange facing may be larger, see “Dimensions”.
Flange standard: light blueLESER: light blue + dark blue
(H50)
Flange dimensions except fl ange thickness are in accordance with standard. Flange thickness is smaller (max. 2 mm), see “Multiple pressure rating”.
Flange standard: light blue + dark blueLESER: light blue
[H50]
Flange drilling as specifi ed in standard. Flange thickness may be smaller. Outer fl ange diameter is smaller than required, but complete back side facing for nut is assured.
Flange standard: light blue + dark blueLESER: light blue
Option code for fl ange facing, e. g. L36
L36 Flange facing as specifi ed in fl ange standard
*x
–
*–
(*)
Ge
ne
ral
Signs and symbols
17
How to useHow to useGlossar – LESER Option codes
For ordering and technical specifi cation of LESER safety valves so-called “Option codes” are used. Materials, connections, accessories and documentations (certifi cates and inspections) can be specifi ed quick and comfort-able. Therefore the order transaction can be reduced. Option codes are mentioned in several different documents. These documents are among others:
• Order confi rmation and shipping documents (Fig. 1)• Master agreement• LESER Product catalogs• VALVESTAR sizing software• Inspection certifi cate• LESER Work standards
• Price list– How to order (Fig. 2)– Option pages of each safety valve– Option icons – available options of
each product group
Technical specifi cation:
Ordercode output, line 1: M33X00H88H84H51H45H20Body material: (H20) 0.6025 (GG25)Nominal diameter inlet DN 25Nominal diameter outlet DN 40d0 [mm] 23,0Pressure rating inlet (H45) PN 16 acc. to DIN EN 1092Pressure rating outlet (H51) PN 16 acc. to DIN EN 1092Flange facing inlet (H84) Form B1 acc. to DIN EN 1092Flange facing outlet (H88)
Type 441, 442, 444 Option code
• O-ring disc
CR „K“ J21
EPDM „D“ J22
FKM „L“ J23
FFKM „C“ J20
• Disc 1.4404 / 316L L44
• Disc 1.4404 / 316L stellitiert J25
• Elastomer bellows J79
• Stainless steel bellows
– Bonnet open (Type 442) J68
Fig. 1: Extraction of order confi rmation Fig. 2: Extraction of How to order
Ge
ne
ral
18
How to useHow to use
The following listing shows the most common option codes at a glance. The option codes are sorted alphabetically. In general the LESER Option codes apply for all product groups. If an option code is dedicated to a product group, this is shown in the column “Product group”.
LESER Option codes
Option code Designation Product group
A16 Nominal diameter outlet:48X DN 25
Clean Service
A17 Nominal diameter outlet:48X DN 40
A18 Nominal diameter outlet:48X DN 50
A19 Nominal diameter outlet:48X DN 65
A20 Nominal diameter outlet:48X DN 80
A21 Nominal diameter outlet:48X DN 100
A22 Nominal diameter outlet:48X DN 125
A23 Nominal diameter outlet:48X DN 150
A24 Nominal diameter outlet:48X NPS 2 1/2"
A25 Nominal diameter outlet:48X NPS 3"
A26 Nominal diameter outlet:48X NPS 3 1/2"
A27 Nominal diameter outlet:48X NPS 4"
A28 Nominal diameter outlet:48X NPS 4 1/2"
A29 Nominal diameter outlet:48X NPS 5"
A30 Nominal diameter outlet:48X NPS 6"
A66 Special assembled version: SKD Kit
A77 Special assembled version: LA Supply
A79 Nominal diameter outlet:48X NPS 1"
Clean Service
A80 Nominal diameter outlet:48X NPS 1 1/2"
A81 Nominal diameter outlet:48X NPS 2"
A84 Pipe standard outlet: BS 4825-1 & DIN 11866 row C
A85 Pipe standard outlet: DIN 11850 & DIN 11866 row A
A86 Pipe standard outlet: ISO 1127 & DIN 11866 row B
A87 Pipe standard outlet: ISO 2037 / BS 4825 Part 1
Option code Designation Product group
B50 LESER Surface package: Clean Finish 481
Clean Service
B51 LESER Surface package: HyClean Finish 481
B52 LESER Surface package: Sterile Finish 481
B53 LESER Surface package: Clean Finish 483
B54 LESER Surface package: HyClean Finish 483
B55 LESER Surface package: Sterile Finish 483
B56 LESER Surface package: Clean Finish 484
B57 LESER Surface package: HyClean Finish 484
B58 LESER Surface package: Sterile Finish 484
B59 LESER Surface package: Clean Finish 5034 / 484
B60 LESER Surface package: HyClean Finish 5034 / 484
B61 LESER Surface package: Sterile Finish 5034 / 484
B62 LESER Surface package: Clean Finish 485
B63 LESER Surface package: HyClean Finish 485
B64 LESER Surface package: Sterile Finish 485
B65 LESER Surface package: Clean Finish 5034 / 485
B66 LESER Surface package: HyClean Finish 5034 / 485
B67 LESER Surface package: Sterile Finish 5034 / 485
B68 LESER Surface package: Clean Finish 488
B69 LESER Surface package: HyClean Finish 488
B70 LESER Surface package: Sterile Finish 488
Option code Designation Product group
H01 Material certifi cation for: Body: EN10204-3.1
H02 Body material: 1.4404 / 316L
Ge
ne
ral
19
How to useHow to use
Option code Designation Product group
H03 Documentation: LESER - 3.1
H04 Body material: 1.4435 / 316L
H07 Body material: LCB / LCC API
H09 Material certifi cation for: Body: EN10204-3.2 API, Serie 458
H1A Body material: CF3M ( special S01)
API
H1B Body material: MONEL 400 (M-35-1) SPECIAL
H1C Body material: Hast. C-22 (CX2MW) SPECIAL
H1D Body material: Duplex (CD3MN) SPECIAL
H1E Body material: Inconel 625 (CW-6MC) SPECIAL
H1F Body material: SuperDuplex (CD3MWCuN) SPECIAL
H10 Pressure rating inlet: PN 63 DIN EN 1092
H11 Pressure rating inlet: PN 160 DIN EN 1092
H12 Pressure rating inlet: PN 250 DIN EN 1092
H13 Pressure rating inlet: PN 320 DIN EN 1092
H14 Pressure rating inlet: PN 400 DIN EN 1092
H15 Pressure rating outlet: PN 40 DIN EN 1092
H16 Pressure rating outlet: PN 63 DIN EN 1092
H17 Pressure rating inlet: PN 100 DIN EN 1092
H18 Body material: 1.0305 / 1.0640 (A106B / A105)
H19 Valve treatment: Body in- & outside blasted
H2A Material certifi cation for: Body: Nace EN10204-3.1
API
H2B Material certifi cation for: Disc: Nace EN10204-3.1
H2C Material certifi cation for: seat/nozzle: Nace EN10204-3.1
H2D Material certifi cation for: Adjusting ring: EN10204-2.2
H2E Material certifi cation for: bonnet spacer: EN10204-3.1
H2F Material certifi cation for: spring plate: EN10204-2.2
H2G Material certifi cation for: pressure srew: EN10204-2.2
H2H Material certifi cation for: sealing pos. 60: EN10204-2.2
H2J Material certifi cation for: adjusting screw: EN10204-2.2
H2K Material certifi cation for: Spring Pos.59: EN10204-3.1
H20 Body material: 0.6025 (GG 25)
H21 Valve treatment: Valve outside blasted
H22 Body material: 1.0619 / WCB / WCC
H23 Body material: 0.7043 (GGG 40.3)
H24 Body material: 1.7357 / WC6
H25 Body material: 1.4571 / 316Ti
H26 Body material: 1.0460/1.0425 (C22.8/P 265 GH)
H27 Seat: according to Stoomwezen
H28 Body material: 1.4408 / CF8M
H29 Heating jacket: Connection sleeve G3/8 DIN2986
H30 Heating jacket: Connection sleeve G3/4 DIN2986
H31 Heating jacket: Connection fl ange DN 15, PN 40
H32 Heating jacket: Connection fl ange DN 25, PN 40
H33 Heating jacket: for Bonnet spacer
H34 Inlet connection: GS-Aseptik thread form A
Clean ServiceH35 Outlet connection: GS-Aseptik-thread Form A
H36 Inlet connection: BS-Aseptik-clamp+nut form A
H37 Outlet connection: BS-Aseptik-clamp+nut form A
H38 Pressure rating inlet: undrilled
H39 Pressure rating outlet: undrilled
H3A Body material: inl.1.4571 outl.1.0460/1.0425 High Performance XXL
Ge
ne
ral
20
How to useHow to use
Option code Designation Product group
H42 Brackets: drilled
H44 Pressure rating inlet: PN 10 DIN EN 1092
H45 Pressure rating inlet: PN 16 DIN EN 1092
H46 Pressure rating inlet: PN 25 DIN EN 1092
H47 Pressure rating inlet: PN 40 DIN EN 1092
H50 Pressure rating outlet: PN 10 DIN EN 1092
H51 Pressure rating outlet: PN 16 DIN EN 1092
H52 Pressure rating outlet: PN 25 DIN EN 1092
H54 Inlet connection: GT-Aseptic thread Form B
Clean Service
H55 Outlet connection: GT-Aseptic thread Form B
H56 Inlet connection: BT-Aseptic-clamp+nut form B
H57 Outlet connection: BT-Aseptic clamp+nut form B
H58 Inlet connection: BD- NEUMO sterile clamp1)
H59 Outlet connection: BD - NEUMO sterile clamp1)
H60 Inlet connection: GD-NEUMO sterile clamp1)
H61 Outlet connection: GD- NEUMO sterile thread1)
H62 Flange facing inlet RTJ - Ring Joint Facing, B16.5
H63 Flange facing outlet: RTJ - Ring Joint Facing, B16.5
H64 Pressure rating inlet: 150 lbs ASME B16.5
H65 Pressure rating inlet: 300 lbs ASME B16.5
H66 Pipe standard inlet: BS 4825-1 & DIN 11866 row C
H67 Pressure rating inlet: 600 lbs ASME B16.5
H68 Pressure rating inlet: 900 lbs ASME B16.5
H69 Pressure rating inlet: 1500 lbs ASME B16.5
H70 Pressure rating inlet: 2500 lbs ASME B16.5
H71 Inlet connection: NF-fl ange, groove Form A
Clean Service
H72 Outlet connection: NF- fl ange, groove Form A
H73 Inlet connection: BF- fl ange, tongue form A
H74 Outlet connection: BF- fl ange, tongue form A
H75 Inlet connection: NG-fl ange, groove Form B
H76 Outlet connection: NG- fl ange, groove Form B
H77 Inlet connection: BG- fl ange, tongue form B
H78 Outlet connection: BG- fl ange, tongue form B
H79 Pressure rating outlet: 150 lbs ASME B16.5
H80 Pressure rating outlet: 300 lbs ASME B16.5
H81 Body material: 1.4581 / CF10M
H82 Pressure rating outlet: 600 lbs ASME B16.5
H83 Pressure rating outlet: 900 lbs ASME B16.5
H84 Flange facing inlet Form B1
H85 Pipe standard inlet: DIN 11850 & DIN 11866 row A
H86 Pipe standard inlet: ISO 1127 & DIN 11866 row B
H87 Pipe standard inlet: ISO 2037 / BS 4825 Part 1
H88 Flange facing outlet: Form B1
H89 Flange facing inlet Serr spiral fi nish, Ra=3,2-6,3
H90 Flange facing outlet: overwounded Rz=6,3μm
H91 Flange facing outlet: Form D: groove, DIN EN 1092
H92 Flange facing outlet: Form C: spring, DIN EN1092
H93 Flange facing inlet Form D: groove, DIN EN 1092
H94 Flange facing inlet Form C: spring, DIN EN1092
H95 Flange facing inlet overwounded Rz=6,3μm
1) BioConnect® is registered wordmark of NEUMO GmbH & Co. KG, D – 75438 Knittlingen
Ge
ne
ral
21
How to useHow to use
Option code Designation Product group
H96 Flange facing inlet Form E: male, DIN EN1092
H97 Flange facing inlet Form F: female, DIN EN1092
H98 Flange facing outlet: Form E: male, DIN EN1092
H99 Flange facing outlet: Form F: female, DIN EN1092
Option code Designation Product group
I11 Surface treatment type 316_317 free of oil and grease Bursting disc
I13 Nominal diameter inlet: 48X DN 50
Clean Service
I14 Nominal diameter inlet: 48X DN 15
I16 Nominal diameter inlet: 48X DN 25
I17 Nominal diameter inlet: 48X DN 40
I18 Nominal diameter inlet: 48X DN 65
I19 Nominal diameter inlet: 48X DN 80
I20 Add. Specifi cation of Marking: Plate: max. a-values stamped
I21 Flanged inlet connection: DN 15 PN 40, DIN EN 1092
Compact Performance
I22 Flanged inlet connection: DN 15 PN 160, DIN EN 1092
I23 Flanged inlet connection: DN 15 PN 250, DIN EN 1092
I24 Flanged inlet connection: DN 15 PN 320, DIN EN 1092
I25 Flanged inlet connection: DN 15 PN 400, DIN EN 1092
I26 Flanged inlet connection: DN 20 PN 40, DIN EN 1092
I27 Flanged inlet connection: DN 20 PN 100, DIN EN 1092
I28 Change nominal diameter inlet to DN 40 / NPS 1 1/2"
High PerformanceI29 Change nominal diameter outlet to DN 80 / NPS 3"
I30 Change nominal diameter outlet to DN 150 / NPS 6"
I31 Flanged inlet connection: DN 25 PN 40, DIN EN 1092
Compact Performance
I32 Flanged inlet connection: DN 25 PN 160, DIN EN 1092
I33 Flanged inlet connection: DN 25 PN 250, DIN EN 1092
I34 Flanged inlet connection: DN 25 PN 320, DIN EN 1092
I35 Flanged inlet connection: DN 25 PN 400, DIN EN 1092
I37 Nominal diameter inlet: 48X DN 100 Clean Service
I38 Flanged inlet connection: DN15 PN40, DIN EN 1092 85mm
I39 Soft seal disc: with sealing plate (PTFE+carb)
I40 Flanged outlet connection: DN 15 PN 40, DIN EN 1092
Compact Performance
I41 Flanged outlet connection: DN 15 PN 160, DIN EN 1092
I42 Flanged outlet connection: DN 15 PN 250, DIN EN 1092
I43 Flanged outlet connection: DN 20 PN 40, DIN EN 1092
I44 Flanged outlet connection: DN 20 PN 100, DIN EN 1092
I45 Flanged inlet connection:DN15 PN160, DIN EN 1092 95mm
I46 Flanged outlet connection: DN 25 PN 40, DIN EN 1092
I47 Flanged outlet connection: DN 25 PN 160, DIN EN 1092
I48 Flanged outlet connection: DN 25 PN 250, DIN EN 1092
I49 Flanged outlet connection: DN 40 PN 40, DIN EN 1092
I50 Flanged outlet connection: DN 40 PN 160, DIN EN 1092
I51 Flanged outlet connection: DN 40 PN 250, DIN EN 1092
I52 Flanged inlet connection:DN25 PN40, DIN EN 1092 100mm
I54 Flanged inlet connection:DN25 PN160, DIN EN 1092 115mm
I55 Flanged outlet connection:DN25 PN40, DIN EN 1092 65mm
Ge
ne
ral
22
How to useHow to use
Option code Designation Product group
I56 Flanged outlet connection:DN25 PN160, DIN EN 1092 95mm
Compact Performance
I63 Guide material: 1.4404 / 316L API
I71 Inlet connection: FD-Flange PN 16 EN 1092
Clean Service
I72 Outlet connection: FD-Flange PN 16 EN 1092
I73 Inlet connection: DO - Clampconnection / ISO2852
I74 Outlet connection: DO - Clampconnection / ISO2852
I75 Inlet connection: BO - Clampconnection /ASME BPE
I76 Outlet connection: BO - Clampconnection /ASME BPE
I78 Nominal diameter inlet: 48X NPS 3/4"
I79 Nominal diameter inlet: 48X NPS 1"
I80 Nominal diameter inlet: 48X NPS 1 1/2"
I81 Nominal diameter inlet: 48X NPS 2"
I82 Inlet connection: VG-DN 32 Varivent connection
I83 Inlet connection: VH - DN 50 Varivent connection
I84 Nominal diameter inlet: 48X NPS 2 1/2"
I88 Flange facing inlet Form N: groove DIN2512 (08/99
I89 Flange facing outlet: Form N: groove DIN2512 (08/99)
I90 Nominal diameter inlet: 48X NPS 3"
I91 Nominal diameter inlet: 48X NPS 3 1/2"
I92 Nominal diameter inlet: 48X NPS 4"
I93 Nominal diameter inlet: 48X NPS 4 1/2"
I94 Flange facing outlet: Form E: male,DIN EN1092
I95 Flange facing outlet: Form F: female,DIN EN1092
I96 Flange facing outlet: Form H: O-ring-groove
I97 Flange facing outlet: Form G: O-ring-male
I98 Flange facing outlet: Form C: tongue,DIN EN1092
I99 Flange facing outlet: Form D: groove,DIN EN1092
Option code Designation Product group
J01 Flange facing inlet Form G: O-ring-male
J02 Flange facing outlet: Form G: O- ring-male
J03 Flange facing inlet Form H: O-ring-groove
J04 Flange facing outlet: Form H: O- ring-groove
J05 Flange facing inlet Form V48A: Linde-V-groove
J06 Flange facing outlet: Form V48A: Linde-V-groove
J07 Flange facing inlet Form V48: Linde-V-groove
J08 Flange facing outlet: Form V48: Linde-V-groove
J11 Flange facing inlet Form L: lenticular seal
J12 Flange facing outlet: Form L: lenticular seal
J13 Change nominal diameter inlet to DN 80 / NPS 3"
J17 Add. Specifi cation of Marking: Plate: Spirax Sarco
J18 Drain hole: G 1/4 with lock screw(1.4401)
J19 Drain hole: G 1/2 with lock screw(1.4401)
J20 Soft seal disc: with soft seal FFKM "C"
J21 Soft seal disc: with soft seal CR "K"
J22 Soft seal disc: with soft seal EPDM "D"
J23 Soft seal disc: with soft seal FKM "L"
J24 Metal disc / mat.: turnable,removable lifting aid
J25 Metal disc / mat.: turnable,rem.lifting aid,stel.
J26 Metal disc / mat.: lifting aid, detachable
Ge
ne
ral
23
How to useHow to use
Option code Designation Product group
J30 Soft seal disc: with soft seal NBR "N"
J31 Bonnet, Yoke: with vent hole 11,5 mm
J32 Bonnet, Yoke: with control connection G 1/4
J33 Bonnet material: 1.0619 (GP240GH)
J34 Bonnet, Yoke: bonnet without vent hole
J35 Bonnet, Yoke: lock screw (1.440) f. G1/4
J36 Bonnet material: 0.7043 (GGG 40.3)
J37 Bonnet material: LCB / LCC
J38 Proximity switch: FH with adapter M12 x 1
J39 Proximity switch: H4 with adapter M12x1/ M18x1
J40 Proximity switch: H8 with adapter M12x1
J41 Lifting device / cap: H8 in double piston design
J42 Bonnet material: 1.4408/1.4571/1.4404
J44 Soft seal disc: with sealing plate (PTFE-FDA)
J45 Adjusting screw: adjusting screw with collar
J46 Adjusting screw: adjg screw+collar+splited ring
J47 Adjusting screw: adjg screw+collar+unsplit.ring
J48 Soft seal disc: with sealing plate (PCTFE)
J49 Soft seal disc: with sealing plate VESPEL-SP1
J50 Lift stopper: with actuate screw LWN 324.01
J51 Lift stopper: with ring
J52 Lift stopper: with actuate screw LWN 324.01
J55 Bellows: for high set pressure
J56 Lever: notched, secured
J62 Lifting device / cap: H2, open bonnet
J63 Bellows: for low set pressure
J64 Lifting device / cap: H4, type 544
J65 Lifting device / cap: H2 with O-ring-damper
J66 Lifting device / cap: H4 with O-ring-damper
J67 Lifting device / cap: H4 with spring-vibration damp.
J68 Bellows: stainl.steel 1.4571/316Ti o.b.
J69 Lifting device / cap: H4 with lock screw(Test Gag)
J70 Lifting device / cap: H2 with lock screw(Test Gag)
J75 Add. Specifi cation of Marking: with name plate of customer
J78 Bellows: stainless steel 1.4571 / 316Ti
J79 Bellows: Elastomer EPDM
J80 Bellows: Elastomer bellows: not applic.
J81 Bellows: Hastelloy C276 / 2.4819
J82 Bellows: Inconel 625 / 2.4856
J83 Bellows: Inconel 625/ conn.Parts 316L
J85 Valve treatment: free of oil and grease
J86 Functional tightness: high tightness, LGS 0201
J87 Bellows: Elastomer NBR
J88 Bellows: high temperature design
J89 Stud & nut material: 1.4401 (A4-70)
J91 Valve treatment: screws, free of oil
J93 Proximity switch: "N" M12x1/ M18x1 (DC)
J95 Bonnet, Yoke: with control connect. NPT 1/2
J96 Scope of supply: chamber/condens.vessel not ass
J97 Scope of supply: spring not assembled
Ge
ne
ral
24
How to useHow to use
Option code Designation Product group
J98 Scope of supply: without condensate vessel
Option code Designation Product group
K01 Lifting device / cap: H2 with bolted capH1
K02 Operating condition: suspended assembly
K03 Soft seal disc: with soft seal EPDM "D"90 IRHD
K04 Bonnet, Yoke: w. control connection NPT 1/8
K05 Lifting device / cap: H2 with bolted capH1(Test Gag)
K06 Lifting device / cap: H4 bolted lifting dev.H6
K07 Lifting device / cap: H2 material 1.4404 (BASF)
K1A Nozzle material Duplex SS, S31803, 1.4462
API
K1B Nozzle material Super DUPLEX, S32760, 1.4501
K1C Nozzle material 1.4571 / 316Ti
K1D Nozzle material 1.4571 / 316Ti stellitede
K1M Adjusting ring material: Monel 400, N04400, 2.4360
K1N Adjusting ring material: Hast. C-4, N06455, 2.4610
K1O Adjusting ring material: INC. 625, N06625, 2.4856
K1P Adjusting ring material: DUPLEX SS, S31803, 1.4462
K1Q Adjusting ring material: Super DUPLEX, S32760, 1.4501
K2A Metal disc / mat.: Super DUPLEX, S32760, 1.4501
K2M Lock srew material: Monel 400, N04400, 2.4360
K2N Lock srew material: Hast. C-4, N06455, 2.4610
K2O Lock srew material: INC. 625, N06625, 2.4856
K2P Lock srew material: DUPLEX SS, S31803, 1.4462
K2Q Lock srew material: Super DUPLEX, S32760, 1.4501
K3A Guide material: Monel 400, N04400, 2.4360
K3B Guide material: Hastelloy C-4, N06455, 2.4610
K3C Guide material: Inconel 625, N06625, 2.4856
K3D Guide material: Duplex SS, S31803, 1.4462
K3E Guide material: Super Duplex, S32760, 1.4501
K4A Spindle material: Monel 400, N04400, 2.4360
K4B Spindle material: Hastelloy C-4, N06455, 2.4610
K4C Spindle material: Inconel 625, N06625, 2.4856
K4D Spindle material: Duplex SS, S31803, 1.4462
K4E Spindle material: Super DUPLEX,S32760, 1.4501
K4Z Spindle material: 1.4404 / 316L
K27 Lifting device / cap: H4 bolted lifting dev.H6 / Test Gag
K31 Heating jacket: Connection fl ange NPS 1/2 ANSI
K32 Heating jacket: Connection fl ange NPS 1" ANSI
K39 Add. Specifi cation of Marking: Plate: a-values only for S/G
K40 Add. Specifi cation of Marking: Plate: a-values for fl uids
Option code Designation Product group
L02 Surface treatment: pickled version lifting dev.H4
L05 Painting: color from customer
L06 Painting: without coloring
L08 Surface treatment: pickled version
L11 Painting: RAL 3002, carmine red
L13 Painting: SPECIAL - valve coating
L16 Surface treatment: medium contact.parts Ra<0,8 μm
L18 inlet body- & disc-material: 1.4404 (316L) for t < -10°C
L20 Seat: stellited sealing surface
Ge
ne
ral
25
How to useHow to use
Option code Designation Product group
L22 Material certifi cation for: Inlet fl ange: EN10204-3.1
L23 Material certifi cation for: Disc: EN10204-3.1
L25 Documentation: Material-3.1 stay at LESER
L30 Material certifi cation for: Bonnet: EN10204-3.1
L31 Material certifi cation for: Cap/Lifting device: 3.1
L34 Material certifi cation for: Outlet body: EN10204-3.1
L36 Flange facing inlet Form B2: "smooth fi nish"
L38 Flange facing outlet: Form B2: "smooth fi nish"
L39 Flange facing outlet: Serr spiral fi nish, Ra=3,2-6,3
L40 Metal disc / mat.: Monel 400, N04400, 2.4360
L41 Metal disc / mat.: Hastelloy C-4, N06455, 2.4610
L42 Metal disc / mat.: Inconel 625, N06625, 2.4856
L43 Metal disc / mat.: Duplex SS, S31803, 1.4462
L44 Metal disc / mat.: 1.4404 / 1.4571
L45 Lever: shortened to
L46 Lever: colored red to L1:... mm
L47 Lever: extended
L50 Pressure setting: set, not stamped at nameplate
L52 Flange facing inlet Smooth fi nish, Rz 25 μm
L53 Flange facing outlet: Smooth fi nish, Rz 25 μm
L54 Gasket material: KLINGERsil C-4400
L55 Flange facing inlet groove Form D, EN 1092
L58 Flange facing inlet RTJ Nozzle B16.5 Standard
L59 Material certifi cation for: Seat/ Nozzle: EN10204-3.1
L60 Material certifi cation for: spring: EN10204-3.1
L61 Seat: stellitede sealing surface
L62 Nozzle material stellitede sealing surface
L63 Nozzle material dim. acc. to PN 40, EN 1092
L64 Nozzle material Material 1.4404/316L
APIL65 Nozzle material Mat. 1.4404 / 316L stellitede
L66 Nozzle material Monel 400, N04400, 2.4360
L67 Nozzle material Hasteloy C-4, N06455, 2.4610
L68 Gasket material: PTFE Compound
L69 Nozzle material Inconel 625, N06625, 2.4856 API
L70 Inlet connection: VC-Varivent connection 80
Clean Service
L75 Inlet connection: GO-SC-Clamp DIN 11851
L76 Inlet connection: KO-SD-Clamp DIN 11851
L77 Inlet connection: 00-Welded connection
L78 Inlet connection: TN-Tuchenhagen-Flange
L79 Inlet connection: SO - Clampconnection /DIN32676
L80 Inlet connection: VE-Varivent connection 127
L81 Outlet connection: GO-SC-screwed socket DIN 11851
L82 Outlet connection: KO-SD-clamp DIN 11851
L83 Outlet connection: 00-Welded connection
L84 Outlet connection: TN-Tuchenhagen-fl ange
L86 Outlet connection: SO - Clampconnection /DIN32676
L90 Inlet connection: AF-APV-FG1 Flange
Clean ServiceL91 Outlet connection: AF-APV-FG1 fl ange
L92 Inlet connection: AN-APV-FN1 fl ange
L93 Outlet connection: AN-APV-FN1 fl ange
Ge
ne
ral
26
How to useHow to use
Option code Designation Product group
L94 Inlet connection: FA-Flange ANSI 150 lbs RF
Clean ServiceL95 Outlet connection: FA-Flange ANSI 150 lbs RF
L96 Inlet connection: CO - Clampconnection / ISO2852
L97 Outlet connection: CO - Clampconnection / ISO2852
Option code Designation Product group
M01 Documentation: Cert 3.1 Hydrost test customer
M03 Documentation: Cert 3.1 Dye penetrant test
M04 Pressure setting: with correction back pressure
M05 Pressure setting: with correction high temp.
M06 Pressure setting: with set presure + 0,5 bar
M07 Pressure setting: with steam
M08 Lifting device / cap: Lifting device turned 180°
M09 Pressure setting: with water (in Hohenwestedt)
M10 Pressure setting: with correction for fl uids
M11 Bonnet, Yoke: Control bore 180° to outlet
M16 Specifi cation of 3rd Marking: Marking Worldnameplate 1.Row
M17 Specifi cation of 3rd Marking: Marking Worldnameplate LLC 1.R
M18 Documentation: Cert 3.1 Shell tightness
M19 Documentation: Seat-Ø, weight movable parts
M21 Documentation: Cert 3.1 Flurescent penetrant
M22 Documentation: Cert 3.1 Seat tight air leak
M23 Documentation: list of material f.inner parts
M24 Specifi cation of TAG-Marking: plate, stainless steel
M25 Specifi cation of TAG-Marking: with tag (foil / paper)
M26 Specifi cation of TAG-Marking: stamped letters,outlet fl . top
M27 Specifi cation of TAG-Marking: stamped letters, inlet body
M28 Documentation: Cert 3.1 Back tight test fl uid
M29 Specifi cation of TAG-Marking: with stainless steel tag
M30 Add. Specifi cation of Marking: Plate fi xed with nails
M31 Specifi cation of TAG-Marking: stamped letters, E-Fl
M32 Specifi cation of TAG-Marking:stamped letters 10 mm HÜLS, outlet fl ange
M33 Inspections: TÜV- certifi cation
M34 Specifi cation of TAG-Marking: stamped letters 10 mm HÜLS, inlet fl ange
M35 Inspections: TÜV-test rec.tightness
M37 Switch cabinet Start-up & maint. at customer
M38 Inspections: ABS - American Bureau of Ship.
M39 Specifi cation of TAG-Marking: stamped letters,outlet fl .let.
M41 Add. Specifi cation of Marking: assembler stamp
M42 Specifi cation of TAG-Marking: stamped letters,outlet fl .bot.
M43 Inspections: BV - Bureau Veritas
M44 Documentation: Cert 3.1 Magnetic particle test
M45 Inspections: DNV - Det Norske Veritas
M46 Documentation Cert 3.1 Material identifi .
M47 Inspections: GL - Germanischer Lloyd
M48 Inspections: Lloyd`s Regsiter EMEA
M49 Inspections: by:
M50 Inspections: RINA-Registro Italiano Navale
M52 Inspections: by Q-Offi cer
M53 Documentation: Cert 3.1 Free of oil + grease
Ge
ne
ral
27
How to useHow to use
Option code Designation Product group
M55 Inspections: GUS-Russ.Maritime Reg.of Ship.
M56 Documentation: Cert 3.1 Ultrasonic test
M57 Documentation: Meetbrief acc. to Stoomwezen
M58 Documentation: Docu. acc. to WI_3621.24
M59 Documentation: Set Pressure Characteris.Curve
M63 Packing: packing into foil
M64 Seal: doubled and twisted
M65 Documentation: TÜV insp. on type test cert.
M66 Documentation: test report seat tightness
M67 Documentation: Assembly Kit Certifi cate
M68 Documentation: APZ 3.1 Hydrost. Test LGS 0209
M69 Lifting device / cap: H2 / H4 with E-CTFE sealing
M70 Bonnet, Yoke: with bug screen
M77 Documentation: Cert3.1Seat tight helium sniff
M78 Documentation: Cert 3.1 Back tight dipping
M81 Documentation: Cert3.1Seat tight helium vacu
M82 Documentation: Cert 3.1 Back tight helium
M86 Functional tightness: Helium leakage test vacuum
M87 Heating for control unitStandard electrical heating inclusive temperature control
Supplementary loading system
M89 Remote lifting: EEX mII T5 Solenoid valve 24 V
M90 SLS adaption: Spindel:ThreadConnection
M91 SLS adaption: Bonnet: hole circle
M92 SLS adaption: Adjusting screw, special
M93 Control system: limit switch
M94 Electrical heating: with EX-protection Zone 1
M95 Weather protection: IP 65 by protection case (box in box)
M96 Remote lifting: Solenoid valve 230 V
M97 Remote lifting: Solenoid valve 24 V
M98 Remote lifting: EEX mII T5 - Solenoid valve 230V
M99 Pressure setting: setting warm (steam/air)
Option code Designation Product group
N03 Documentation: SS-bellows - 3.1 (He- test)
N04 Documentation: Docu. special surfaces
N05 Documentation: Cert 3.1 cdtp test
N07 Material certifi cation for: Studs: EN10204-3.1
N08 Material certifi cation for: Nuts: EN10204-3.1
N09 Add. Specifi cation of Marking: with plate "Thies"
N10 Add. Specifi cation of Marking: with plate "Protego-LESER"
N11 Specifi cation of TAG-Marking: SS plate, outlet fl ., nailed
N1A Documentation: PMI spindle
N1B Documentation: PMI guide
N1C Documentation: PMI bonnet
N1D Documentation: PMI spring
N1E Documentation: PMI bellows
N1F Documentation: PMI cap/lifting device
N1G Documentation PMI top plate (POSV)
N1H Documentation PMI piston guide (POSV)
N1J Documentation PMI spring (POSV Pos.59)
N1R Documentation 2.2 Test Report Visual Inspec.
Ge
ne
ral
28
How to useHow to use
Option code Designation Product group
N1S Documentation: 2.2 Test Report Dim. Insp.
N22 Add. Specifi cation of Marking: with plate "Sauer & Sohn"
N2A Documentation: X-ray examination body (crit.area)
N2B Documentation: X-ray examination bonnet (crit.area)
N31 Inspections: USCG - U.S. Coast Guard
N35 Add. Specifi cation of Marking: Plate: a-value(s) add to
N3A Material certifi cation for: Outlet adaptor: EN10204-3.1
N3B Material certifi cation for: Outlet fl ange: EN10204-3.1
N50 Functional tightness: high tightness, (intern)
N51 Functional tightness: Max. tightness, only BASF
N52 Documentation: Surface crack test disc
N53 Documentation: Surface crack test seat/nozzle
N54 Documentation: Surface Crack test body
N55 Documentation: PMI disc
N56 Documentation: PMI seat/nozzle
N57 Documentation: PMI body
N58 Documentation: Surface crack test Bonnet
N62 Functional tightness: Helium leakage test
N64 Body tightness: SV He-test 1x10-5 mbar l/s
N65 Body tightness: SV-tightness tet outside
N68 Design specifi cation: acc. to ASME Sec. VIII
N69 Specifi cation of TAG-Marking: SS plate,outlet fl .spot welded
N70 Design specifi cation: acc. to ASME Sec.VIII / AD2000
N71 Design specifi cation: acc. to UDT (VR Polen)
N72 Design specifi cation: acc. to TR + RTN (russian)
N73 Design specifi cation: acc. to CSBQTS (VR China)
N74 Design specifi cation: acc. KOSHA, WI_3612.14 (Korea)
N75 Design specifi cation: acc. to Cert. for Canada
N76 Design specifi cation: acc. GOSPROMNADZOR (Belarus)
N77 Design specifi cation: acc. NACE Standard MR0103-2012
N78 Design specifi cation: acc. NACE Standard MR0175-2003
N79 Design specifi cation: acc. to EMPG
N7A Design specifi cation: analysis restriction body
N7B Design specifi cation: analysis restriction bonnet
N80 Design specifi cation: Solarvalve / collectorfi eld Compact Performance
N84 Design specifi cation: Flanged connection welded
N85 Design specifi cation: acc to ASME Sec.VIII(UD-stamp)
N91 Material certifi cation for: Bonnet: EN10204-3.2
N92 Material certifi cation for: Disc: EN10204-3.2
N93 Material certifi cation for: Seat / Nozzle: EN10204-3.2
N94 Material certifi cation for: Spindle: EN10204-3.1
N95 Material certifi cation for: Guide: EN10204-3.1
Option code Designation Product group
P2A Painting: RAL 5005 LESER blue
P2C Painting: RAL 5005 LESER blue, min. 80μm
P2D Painting: RAL 3002, carmine red, min. 80
P79 Documentation: anticorrosive certif. Frosio 3rd party
P80 Documentation: anticorro. certifi c. Frosio II & I
P81 Documentation: adherence test <250μm
P82 Documentation: adherence test >250μm
Ge
ne
ral
29
How to useHow to use
Option code Designation Product group
P83 Documentation: Holiday Test
P84 Documentation: Dry fi lm thickness (DFT)
P85 Painting: anticorrosive high temp. WCB
P86 Painting: anticorrosive C5M for WCB
P87 Painting: anticorrosive high temp. CF8M
P88 Painting: anticorrosive C5M for CF8M
P89 Painting: anticorrosive cryogenic
P90 Painting: 3-layer coating system RAL5005
P91 Painting: 4-layer coating system RAL5005
P92 Painting: 2-layer coating system alu
P93 Painting: 3 layers painting RAL 3002
Option code Designation Product group
R01 O-Ring, inner top plate seal soft seal FKM "L"
R01 O-Ring, outer top plate seal with soft seal FKM "L"
R02 O-Ring, inner top plate seal soft seal EPDM "D"
R02 O-Ring, outer top plate seal with soft seal EPDM "D"
R03 O-Ring, inner top plate seal soft seal FFKM "C"
R03 O-Ring, outer top plate seal with soft seal FFKM "C"
R04 O-ring, seals soft seal FKM "L"
R05 O-ring, seals soft seal EPDM "D"
R06 O-ring, seals soft seal FFKM "C"
R07 O-Ring (Pop Action) soft seal FKM "L"
R08 O-Ring (Pop Action) soft seal EPDM "D"
R09 O-Ring (Pop Action) soft seal FFKM "C"
R10 O-Ring (Modulate Action) soft seal FKM "L"
R11 O-Ring (Modulate Action) soft seal EPDM "D"
R12 O-Ring (Modulate Action) soft seal FFKM "C"
R13 O-Ring Pos. 73 PL-Mod MB Diaphragm FKM
R14 O-Ring Pos. 73 PL-Mod MB Diaphragm EPDM
R15 O-Ring Pos. 73 PL-Mod MB Diaphragm FFKM Series 810, 820
R16 O-Ring Pos. 73 PL-Mod MB Diaphragm FKM/shield PTFE
R17 O-Ring, piston with soft seal FKM "L"
R18 O-Ring, piston with soft seal EPDM "D"
R19 O-Ring, piston with soft seal FFKM "C"
R1A O-Ring (Pop Action) FKM "ED" conform design
R1B O-Ring (Pop Action) FFKM "ED" conform design
R20 O-Ring, piston PTFE piston seal, spring energ.
R22 Pilot lifting lever manually with Test-Gag
R23 Fitting according to: Swagelok
R24 Manual Blowdown into body
R25 Pilot lifting lever manually
R26 Field Test Connector included
R27 Manual Blowdown to atmosphere
R28 Remote Sensing with Remote Sensing (RS)
R2A O-Ring Dichtungen (Modulate Action) FKM "ED" conform design
R2B O-Ring Dichtungen (Modulate Action) FFKM "ED" conform design
R30 Pilot Supply Filter included
R33 Pilot lifting lever Cap with Test Gag
R44 Blowdown adjustment Input: interactiv
R46 Cover material 1.4404/316L
Ge
ne
ral
30
How to useHow to use
Option code Designation Product group
R48 Drain hole: NPT 1/2 with lock screw (1.4401)
Series 810, 820
R64 Overlap of Mod. Action design Piston Size 1, 28 - 30 bar-g
R70 Design specifi cation: acc NACE Standard MR0175-2003
R71 Metal disc / mat.: Mat. 1.4571 / 1.4404
R75 Material certifi cation for: piston device: EN10204-3.1
R76 Material certifi cation for: cover: EN10204-3.1
R77 Material certifi cation for: piston guide: EN10204-3.1
R78 Material certifi cation for: body pilot: EN10204-3.1
R79 Material certifi cation for: bonnet pilot: EN10204-3.1
R84 Material certifi cation for: manifold: EN10204-3.1
R88 Material certifi cation for: fi eld test connector: 3.1
R89 Material certifi cation for: Pilot Supply Filter: 3.1
R93 Design specifi cation:: acc. NACE Standard MR0103-2012
R94 Specifi cation of Pilot TAG-No. with tag (foil / paper)
R95 Specifi cation of Pilot TAG-No. with stainless steel tag
R98 Documentation: Cert 3.1 Testing leack Pr.seal
Option code Designation Product group
S00 Specials: Special process
S01 Specials: Special body
S02 Specials: Special outlet body
S03 Specials: Special fl ange bend
S05 Specials: Special nozzle
S06 Specials: Special adjusting ring
S07 Specials: Special disc
S08 Specials: Special guide
S09 Specials: Special bonnet
S10 Specials: Special handwheel-/chain-act
S11 Specials: Special bonnet spacer
S12 Specials: Special spindle
S14 Specials: Special split ring
S15 Specials: Special bellows
S16 Specials: Special spring plate, upper
S17 Specials: Special spring plate, lower
S18 Specials: Special adjusting screw
S19 Specials: Special lock nut
S34 Specials: Special lever
S37 Specials: Special weight
S40 Specials: Special cap/lifting device
S48 Specials: Special body connection inlet
S49 Specials: Special body connection outlet
S50 Specials: Special typetestapproval plate
S54 Specials: Special spring
S55 Specials: Special studs
S56 Specials: Special hex. nuts
S57 Specials: Special pin
S60 Specials: Special gasket item 60
S63 Specials: Special gasket item 63
S64 Specials: Special plug-screw bonnet
S67 Specials: Special gasket item 67
S69 Specials: Special axial needle bearing
Ge
ne
ral
31
How to useHow to use
Option code Designation Product group
S70 Specials: Special elastomer bellows
S73 Specials: Special lock screw
S80 Specials: Special packing
S81 Specials: Special packing gland
S82 Specials: special-O-R-D
S87 Specials: Special locking screw, gasket
S93 Specials: Special test gag / lift stop
S94 Specials: Special lift indicator
S96 Specials: Special plain coil chain
Option code Designation Product group
V01 Flanged inlet connection: NPS 1/2" Cl 150, B16.5
Compact Performance
V02 Flanged inlet connection: NPS 1/2" Cl 300/600, B16.5
V03 Flanged inlet connection: NPS 1/2" Cl 900/1500, B16.5
V04 Flanged inlet connection: NPS 1/2" Cl 2500, B16.5
V05 Flanged inlet connection: NPS 3/4" Cl 150, B16.5
V06 Flanged inlet connection: NPS 3/4" Cl 300/600, B16.5
V07 Flanged inlet connection: NPS 3/4" Cl 900/1500, B16.5
V08 Flanged inlet connection: NPS 3/4" Cl 2500, B16.5
V09 Flanged inlet connection: NPS 1" Cl 150, B16.5
V10 Flanged inlet connection: NPS 1" Cl 300/600, B16.5
V11 Flanged inlet connection: NPS 1" Cl 900/1500, B16.5
V12 Flanged inlet connection: NPS 1" Cl 2500, B16.5
V13 Flanged outlet connection: NPS 1/2" Cl300/600, B16.5
V14 Flanged outlet connection: NPS 1/2" Cl900, B16.5
V15 Flanged outlet connection: NPS 3/4" Cl150, B16.5
V16 Flanged outlet connection: NPS 3/4" Cl300/600, B16.5
V17 Flanged outlet connection: NPS 3/4" Cl900, B16.5
V18 Flanged outlet connection: NPS 1" Cl150, B16.5
V19 Flanged outlet connection: NPS 1" Cl 300/600, B16.5
V20 Flanged outlet connection: NPS 1" Cl 900, B16.5
V21 Flanged outlet connection: NPS 1 1/2" Cl 150, B16.5
V22 Flanged outlet connection: NPS 1 1/2" Cl 300/600, B16.5
V23 Flanged outlet connection: NPS 1 1/2" Cl 900, B16.5
V24 Flanged outlet connection: NPS 1/2" Cl150, B16.5
V25 Threaded inlet connection: cutting ring screw fi tting
V26 Threaded outlet connection: cutting ring screw fi tting
V30 Threaded inlet connection: male thread R / BSPT 1/2"
V31 Threaded inlet connection: male thread R / BSPT 3/4"
V32 Threaded inlet connection: male thread R / BSPT 1"
V33 Threaded inlet connection: male thread R / BSPT 1 1/2"
V34 Threaded outlet connection: female thread Rc / BSPT 1/2"
V35 Threaded outlet connection: female thread Rc / BSPT 3/4"
V36 Threaded outlet connection: female thread Rc / BSPT 1"
V37 Threaded outlet connection: female thread Rc / BSPT 1 1/2"
V38 Threaded inlet connection: female thread Rc / BSPT 1/2"
V39 Threaded inlet connection: female thread Rc / BSPT 3/4"
V40 Threaded inlet connection: female thread Rc / BSPT 1"
V41 Threaded inlet connection: female thread Rc / BSPT 1 1/2"
V42 Threaded outlet connection: male thread R / BSPT 1"
V43 Threaded outlet connection: male thread R / BSPT 1 1/2"
Ge
ne
ral
32
How to useHow to use
Option code Designation Product group
V44 Threaded inlet connection: SWAGELOK - screw fi tting
Compact Performance
V46 Threaded inlet connection: cuttingring screwfi tting heavy
V47 Threaded inlet connection: cuttingring screwfi tting light
V49 Threaded inlet connection: male thread G 3/8", ISO228-1
V50 Threaded inlet connection: female thread G 1/2", ISO228-1
V51 Threaded inlet connection: female thread G 3/4", ISO228-1
V52 Threaded inlet connection: female thread G 1", ISO228-1
V53 Threaded inlet connection: female thread G 11/2", ISO228-
V54 Threaded inlet connection: male thread G 1/2", ISO228-1
V55 Threaded inlet connection: male thread G 3/4", ISO228-1
V56 Threaded inlet connection: male thread G 1", ISO228-1
V57 Threaded inlet connection: male thread G 11/2",ISO228-1
V58 Threaded inlet connection: female thread NPT 1/2, B1.20.
V59 Threaded inlet connection: female thread NPT 3/4,B1.20.1
V60 Threaded inlet connection: female thread NPT 1,B1.20.1
V61 Threaded inlet connection: male thread NPT 1/2,B1.20.1
V62 Threaded inlet connection: male thread NPT 3/4,B1.20.1
V63 Threaded inlet connection: male thread NPT 1 ,B1.20.1
V64 Threaded inlet connection: male thread NPT 11/2, B1.20.1
V65 Threaded outlet connection: female thread G 1/2", ISO228-1
V66 Threaded outlet connection: female thread G 1", ISO228-1
V67 Threaded outlet connection: female thread G 1 1/2",ISO228-
V68 Threaded outlet connection: male thread G 1", ISO228-1
V69 Threaded outlet connection: male thread G 11/2",ISO228-1
V70 Threaded outlet connection: female thread NPT 1/2, B1.20.1
V71 Threaded outlet connection: female thread NPT 1,B1.20.1
V72 Threaded outlet connection: female thread NPT 1 1/2,B1.20.
V73 Threaded outlet connection: male thread NPT 1, B1.20.1
V74 Threaded outlet connection: male thread NPT11/2 ,B1.20.1
V75 Threaded inlet connection: female thread NPT 1 1/2B1.20.
V76 Threaded outlet connection: female thread G 3/4",ISO228-1
V77 Threaded outlet connection: female thread NPT 3/4,B1.20.1
V79 Threaded outlet connection: male thread G 11/4",ISO228-1
V80 Threaded outlet connection: female thread NPT 11/4,B1.20.
V81 Threaded outlet connection: female thread G 1 1/4",ISO228-
V82 Threaded outlet connection: male thread NPT 11/4, B1.20.1
V83 Threaded inlet connection: male thread G 11/4",ISO228-1
V84 Threaded inlet connection: female thread G 1 1/4",ISO228-
V85 Threaded inlet connection: male thread NPT 11/4, B1.20.1
V86 Threaded inlet connection: male thread NPT 2, B1.20.1
V87 Threaded inlet connection: female thread NPT 11/4,B1.20.
V88 Threaded outlet connection: female thread NPT 2, B1.20.1
V90 Flanged outlet connection: NPS 1" CL150, B16.5 G
V91 Flanged outlet connection: NPS 1" CL300/600, B16.5 G
V92 Flanged outlet connection: NPS 1 1/2" CL150, B16.5 G
V93 Flanged outlet connection: NPS 1 1/2" CL300/600, B16.5 G
Option code Designation Product group
W01 High-press. fl anged inlet connection: IG-Flange NPS 3/8", PR 325
Compact PerformanceW02 High-press. fl anged inlet connection: IG-Flange NPS 3/4", PR 325
W03 High-press. fl anged inlet connection: IG-Flange NPS 1", PR 325
Ge
ne
ral
33
How to useHow to use
Option code Designation Product group
W05 High-press. fl anged inlet connection: IG-Flange NPS11/2", PR 325
Compact Performance
W12 High-press. fl anged inlet connection: IG-Flange NPS 3/4", PR 700
W17 High-press. fl anged outlet connection: IG-Flange NPS 3/4", PR 325
W18 High-press. fl anged outlet connection: IG-Flange NPS 1", PR 325
W19 High-press. fl anged outlet connection: IG-Flange NPS11/4", PR 325
W20 High-press. fl anged outlet connection: IG-Flange NPS11/2", PR 325
W21 High-press. fl anged outlet connection: IG-Flange NPS 3/8", PR 500
W26 High-press. fl anged outlet connection: IG-Flange NPS 3/8", PR 700
W50 Weld-on end inlet ≤ 25 mm
W51 Weld-on end inlet ≥ 33 mm
W52 Weld-on end outlet ≥ 33 mm
Option code Designation Product group
X01 Spring / spring material: warmsolid
X02 Spring / spring material: for SS-bellows Type 546
X03 Spring / spring material: 1.8159/1.7102
X04 Spring / spring material: 1.4310
X06 Spring / spring material: 1.1200
X07 Spring / spring material: 2.4610 (Hastelloy C4)
X08 Spring / spring material: 2.4669 (Inconel X750)
X09 Spring / spring material: 2.4360 (Monel 400)
Option code Designation Product group
Y09 Flange facing side 1: Form B2, "smooth" DIN EN 1092
Change-over valve
Y10 Flange facing side 1: Form C, "tongue" DIN EN 1092
Y11 Flange facing side 1: Form D, "groove" DIN EN 1092
Y12 Flange facing side 1: Form E, "male" DIN EN 1092
Y15 Flange facing side 1: Form F, "female" DIN EN 1092
Y18 Flange facing side 1: Form G,O-ring female DINEN1092
Y19 Flange facing side 1: Form H,O-ring groove DINEN1092
Y21 Flange facing side 2: Form B2, "smooth" DIN EN 1092
Y22 Flange facing side 2: Form C, "tongue" DIN EN 1092
Y25 Flange facing side 2: Form D, "groove" DIN EN 1092
Y28 Flange facing side 2: Form E, "male" DIN EN 1092
Y29 Flange facing side 2: Form F, "female" DIN EN 1092
Y30 Flange facing side 2: Form G, O-ring female EN 1092
Y35 Coupling KR with manual-/chain wheel
Y36 Coupling KR+manual-/chain wheel+chain
Y37 Flange facing side 2: Form H, O-ring groove EN 1092
Y38 Options: Flushing hole G 1/2
Y39 Options: By-pass with non-return valves
Y40 Documentation: tightness- 3.1, Leckr.1
Y41 Material certifi cation for: Body/fl ange bends: EN10204-3.1
Y47 Chain/ chain material: steel galvanized plain coil
Y48 Chain/ chain material: stainless steel plain coil
Y49 Options: Drain hole G 1/2
Y50 Pressure gauge: Without pressure gauge
Bursting disc
Y51 Documentation: Inspection certifi cate 3.1
Y57 Pressure gauge: Std. pressure gauge d=63, G 1/
Y58 Pressure gauge: Contact pressure gauge d=100,
Y59 Pressure gauge: Maximum pointer d=100, G 1/2"
Y60 Documentation: Inspection certifi cate 3.2 TÜV Change-over valve
Ge
ne
ral
34
Option code Designation Product group
Y61 Flange facing side 1: Form A, "fl at" DIN EN 1092
Change-over valve
Y62 Flange facing side 2: Form A, "fl at" DIN EN 1092
Y63 Flange facing side 1: Form B1, "rough" DIN EN 1092
Y64 Flange facing side 2: Form B1, "rough" DIN EN 1092
Y65 Flange facing side 1: Form "Stf", ASME B16.5
Y66 Flange facing side 1: Form "Sgf", ASME B16.5
Y67 Flange facing side 1: Form "Ltf", ASME B16.5
Y68 Flange facing side 1: Form "Lgf", ASME B16.5
Y69 Flange facing side 1: Form "Smf", ASME B16.5
Y70 Flange facing side 1: Form "Sff", ASME B16.5
Y71 Flange facing side 1: Form "Lmf", ASME B16.5
Y72 Flange facing side 1: Form "Lff", ASME B16.5
Y73 Flange facing side 2: Form "Stf", ASME B16.5
Y74 Flange facing side 2: Form "Sgf", ASME B16.5
Y75 Flange facing side 2: Form "Ltf", ASME B16.5
Y76 Flange facing side 2: Form "Lgf", ASME B16.5
Y77 Flange facing side 2: Form "Smf", ASME B16.5
Y78 Flange facing side 2: Form "Sff", ASME B16.5
Y79 Flange facing side 2: Form "Lmf", ASME B16.5
Y80 Flange facing side 2: Form "Lff", ASME B16.5
Y81 Flange facing side 1: Form "FF", ASME B16.5
Y82 Flange facing side 2: Form "FF", ASME B16.5
Y83 Flange facing side 1: Form "RF", ASME B16.5
Y84 Flange facing side 2: Form "RF", ASME B16.5
Y85 Flange facing side 1: Form "Rtj", ASME B16.5
Y86 Flange facing side 2: Form "Rtj", ASME B16.5
Y87 Flange surface side 1: "SF" ASME B16.5
Y88 Flange surface side 2: "SF" ASME B16.5
Y89 Flange surface side 1: "NSF" ASME B16.5
Y90 Flange surface side 2: "NSF" ASME B16.5
Y91 Flange surface side 1: "StF" ASME B16.5
Y92 Flange surface side 2: "StF" ASME B16.5
Y93 Space monitoring device: for std. pressure gauge G 1/4
Bursting discY94 Space monitoring device: for max. pointer/cont.pr.gauge
Y95 Space monitoring device: for DN>150,long vers. G 1/2
Y98 Options: Proximity switchChange-over valve
Y99 Options: Drain hole G 1/4
Option code Designation Product group
Z11 Basic construction of body: Basic constr. body PN40/Cl300
Change-over valve
Z12 Basic construction of body: Basic constr. body PN63
Z13 Basic construction of body: Basic constr. body PN100/Cl600
Z14 Basic construction of body: Basic constr. body PN160/Cl900
Z21 Red. at basic constr. of body: Reducer (PN40/Cl300)
Z22 Red. at basic constr. of body: Reducer (PN63)
Z23 Red. at basic constr. of body: Reducer (PN100/Cl600)
Z24 Red. at basic constr. of body: Reducer (PN160/Cl900)
Z38 Options: Flushing hole NPT 1/2
Z41 Valve for pressure relief: Globe valve DN15 PN40
Z42 Valve for pressure relief: Globe valve DN15 PN63
Z43 Valve for pressure relief: Globe valve DN15 PN100
How to useHow to useG
en
era
l
35
Option code Designation Product group
Z44 Valve for pressure relief: Globe valve DN15 PN160
Change-over valve
Z45 Valve for pressure relief: Globe valve DN15 Cl300
Z46 Valve for pressure relief: Globe valve DN15 Cl600
Z47 Valve for pressure relief: Globe valve DN15 Cl900
Z49 Options: Drain hole NPT 1/2
Z50 Options: Blocking of hand wheel
Z51 Options: Blocking of hand wheel (comb)
Z52 Valve for pressure relief: Needle valve G 1/2 (gland)
Z53 Valve for pressure relief: Needle valve NPT 1/2 (gland)
Z54 Valve for pressure relief: N valve G1/2 bell PN100/CL600
Z55 Valve for pressure relief: N valve G1/2 bell PN160/CL900
Z56 Valve for pressure relief: N valve NPT1/2bell PN100/CL600
Z57 Valve for pressure relief: N valve NPT1/2bell PN160/CL900
Z61 Materials of seat / disc: 2.4360/2.4375 (Monel 400/K500)
Z62 Materials of seat / disc: 2.4856 (Inconel 625)
Z63 Materials of seat / disc: 2.4819 (Hastelloy C276)
Z64 Materials of seat / disc: 2.4610 (Hastelloy C4)
Z65 Material of spindle: 2.4360 (Monel 400)
Z66 Material of spindle: 2.4856 (Inconel 625)
Z67 Material of spindle: 2.4819 (Hastelloy C276)
Z68 Material of spindle: 2.4610 (Hastelloy C4)
Z69 Material of bellows: 2.4360 (Monel 400)
Z70 Material of bellows: 2.4856 (Inconel 625)
Z71 Material of bellows: 2.4819 (Hastelloy C276)
Z72 Material of bellows: 2.4610 (Hastelloy C4)
Z78 Design specifi cation: COV acc. to NACE MR0175
Z90 Pressure range High pressure design API
Z99 Options: Drain hole NPT 1/4 Change-over valve
Option code Designation Product group
202 Material buckling pin dome: 1.4401 - special
Bursting disc
203 Material buckling pin dome: 1.4435 - special
204 Material buckling pin dome: Nickel - special
205 Material buckling pin dome: Inconel - special
206 Material buckling pin dome: Monel - special
207 Material buckling pin dome: Hastelloy C - special
302 Material smooth process side: 1.4404
303 Material smooth process side: 1.4435
304 Material smooth process side: Nickel
305 Material smooth process side: Inconel
306 Material smooth process side: Monel
307 Material smooth process side: Hastelloy 2.4819
400 Connection space mon. device: w/o port f. space mon. device
401 Connection space mon. device: G 1/4
402 Connection space mon. device: G 1/2 - Special
403 Connection space mon. device: NPT 1/4"
404 Connection space mon. device: NPT 1/2" - Special
How to useHow to use
Ge
ne
ral
36
How to useHow to use
Flange drillings Option code
Inlet Outlet
PN 10 DIN EN 1092 H44 H50
PN 16 DIN EN 1092 H45 H51
PN 25 DIN EN 1092 H46 H52
PN 40 DIN EN 1092 H47 H15
PN 63 DIN EN 1092 H10 H16
PN 160 DIN EN 1092 H11
PN 250 DIN EN 1092 H12
PN 320 DIN EN 1092 H13
PN 400 DIN EN 1092 H14
150 lbs ASME B16.5 H64 H79
300 lbs ASME B16.5 H65 H80
600 lbs ASME B16.5 H67 H82
900 lbs ASME B16.5 H68 H83
1500 lbs ASME B16.5 H69
2500 lbs ASME B16.5 H70
Flange facings Option code
Inlet Outlet Nozzle
Flange undrilled H38 H39
Linde-V-Nut, Form V48 J07 J08
Linde-V-Nut, Form V48A J05 J06
Lens seal form L (without sealing lens) J11 J12
DISA Valve H95 H90
Raised face Form B2 L36 L38
Tongue, Form C H94 H92 L56
Groove, Form D H93 H91 L55
Male face, Form E H96 H98
Female face, Form F H97 H99
O ring male face, Form G J01 J02
O ring female face, Form H J03 J04
Smooth finish, Rz 25 μm L52 L53
RTJ - Ring Joint Facing, B16.5 H62 H63 L58
Body material Option code
CF3M (Sonder S01) H1A
Monel 400 (Sonder S01) H1B
Hastelloy C-22 (Sonder S01) H1C
22 CR Duplex (Sonder S01) H1D
1.0619 / WCB / WCC H22
0.7043 (GGG 40.3) H23
1.7357 / WC6 H24
1.4571 / 316Ti H25
1.0460/1.0425 (C22.8/P 265 GH) H26
1.4408 / CF8M H28
1.4581 / CF10M H81
Soft seals Option Code
Sealing plate PTFE + Carbon I39
Soft seal disc FFKM “C” J20
Soft seal disc CR “K” J21
Soft seal disc EPDM “D” 70IRHD J22
Soft seal disc FKM “L” J23
Soft seal disc NBR “N” J30
Sealing plate PTFE-FDA J44
Cross reference – LESER Option codes
Ge
ne
ral
37
How to useHow to use
Soft seals Option Code
Sealing plate PCTFE J48
Sealing plate VESPEL-SP1 J49
Soft seal EPDM “D” 90IRHD K03
Inspections and tests Option code
LESER CGA (Certificate for Global Application)
H03– Inspection certificate 3.1 acc. to DIN EN 10204
– Declaration of conformity acc. to PED 97/23/EC
DIN EN 10204-3.2: TÜV-Nord Certificate for test pressure
M33
Test report DIN EN 10204-2.2 Option code Product group
Adjusting ring H2D API
Spring plate H2F
Adjusting screw H2G
Gasket H2H
Lock screw H2J API
Material test certificate DIN EN 10204-3.1 Option code Product group
Body, Inlet body H01
Bonnet spacer H2E
Inlet flange L22
Disc L23
Body L30
Cap / Lever cover L31
Outlet body L34
Seat / Nozzle L59
Spring L60
Studs N07
Nuts N08
Outlet flange N3B
Outlet connection N3A
Spindle N94
Guide N95
Bellows metal, Elastomer bellows N96
Body / flange elbow Y41 Change-over valve
Piston R75
Series 810, 820
Cover R76
Piston guide R77
Body R78
Bonnet R79
Manifold R84
Field test connection R88
Pilot supply filter R89
Clean Service – LESER Surface Package Option code
TypeLESER Surface Package
Clean finish HyClean finish Steril finish
481 B50 B51 B52
483 B53 B54 B55
484 B56 B57 B58
5034 Vessel connection B59 B60 B61
485 B62 B63 B64
5034 Integrated pipework connection B65 B66 B67
488 B68 B69 B70
Ge
ne
ral
38
H64
How to order – Series 441 – Example for numbering system
4412.4512 70 psig
Please state unit (in gauge)!
Please do not exceed the pressure range defined in the spring charts.
Available flange drillings and flange facings please refer to each product catalog.441 2 451 2
1 2 3 4
.
1 Valve Type 441, 442, 444
22Set Pressure
11Article Number Connections
33
Code Body material
2 WCB Carbon steel
4 316L / CF8M / 316Ti
5 Gr. 60-40-18
Code Lifting device
2 Screwed cap H2
3 Plain lever H3
4 Packed lever H4
5 Plain leverwith open bonnet H3
Type Page
441, 442 ANSI 130
444, 442 XXL 132
441, 442 DIN 134
444 ANSI 136
2 Material code
3 Valve code
Identifies valve size and bodymaterial.
4
How to useHow to useG
en
era
l
39
J23 H01 L30 1.1
Type 441, 442, 444 Option code
• O-ring disc CR Neoprene® “K” J21
EPDM Buna-EP® “D” J22
FPM/FKM Viton® “L” J23
FFKM Kalrez® “C” J20
• Disc 316L L44
• Disc 316L stellited J25
• Stainless steel bellows - Bonnet open (Type 442) J68
- Bonnet closed (Type 441) J78
• Elastomer bellows J79
• High temperature alloy spring X01
• Stainless steel spring X04
• Adaptor for lift indicator H4 J39
• Lift indicator J93
• Test gag - Cap H2 J70
- Packed lever H4 J69
• Heating jacket for body - Couplings NPT H30
- Lap joint flanges H32
• Drain hole 1/4" J18
1/2" J19
• Free of oil and grease J85
• Materials - NACE MR0175 N78
- NACE MR0103 N77
• Marking with stainless steel tag M29
Option code applies only if not standard
Please select required documentation:
Inspections, tests: Option code
LESER CGA (Certificate
for Global Application) H03
- Inspection certificate 3.1 acc. to DIN EN 10204
- Declaration of conformity acc.to PED 97/23/EC
Material test certificate:
DIN EN 10204-3.1
Part Option code
Body H01
Bonnet L30
Cap / Lever cover L31
Disc L23
Studs N07
Nuts N08
1 1
1 2
.
1
2
Code
1. ASME Section VIII
2. CE / VdTUEV
3. ASME Section VIII
+ CE / VdTUEV
Medium
.1 Gases
.2 Liquids
.3 Steam
.0 Steam / Gases / Liquids
( valid only for CE / VdTUEV)
44 55 66Options Documentation Code and Medium
How to useHow to use
Ge
ne
ral
40
41
Co
mp
ac
t
Pe
rfo
rma
nc
e
CompactPerformanceCompactPerformanceSafety Relief Valves
Series 437 Page
• Type 437 42
• Type 438 43
• Type 439 44
• Connections Series 437 45
Series 459 Page
• Type 459 46
• Type 462 48
• Type 459 Heavy duty design 50
• Connections Series 459 52
Spare parts Page
• Spare parts Series 437 54
• LESER Original Spare Parts Kits
Series 45956
• Spare parts Series 459 57
• Soft seal selection 59
• Available options 60
42
Compact PerformanceCompact PerformanceAll prices in $
For soft seal selection please refer to page 59
Delivery time depends on type of connection
Metal seat
Type 437
Standard Long Version – for high pressures
Actual Orifi ce diameter d0 [mm] 10 10 Actual Orifi ce area A0 [inch2] 0.122 0.122
API Orifi ce designation 0.521 D 0.521 DLEOS/G*) [inch2] 0.057 0.057
LEOL*) [inch2] 0.063 0.063Weight threaded [lb] 2.6 3.1
Weight fl anged [lb] 15.5 15.5
4373: Chrome steel
Base / Inlet body 316L H2 Art. No. 4373. 2602 2612
Trim 316L $321 $468
Outlet body / H3 Art. No. 4373. 2603
bonnet 316L pmax = 145 psig $366
H4 Art. No. 4373. 2604 2614 $420 $566
p [psig] S/G/L 1.5 – 1348 1349 – 2610
4374: Stainless steel
All parts 316L H2 Art. No. 4374. 3142 3152 $616 $854
H4 Art. No. 4374. 3144 3154 $761 $1,001
p [psig] S/G/L 1.5 – 986 987 – 2610
Options
Base / Inlet body stellited L20 $172 *Disc stellited J25 $172 $172
Disc1) 316L L44 $34 $34
Plastic seat2)
PTFE-FDA J44 $172 $172
PCTFE J48 $344 $344
Vespel-SP1 J49 $516 $516
Test gagH4 J69 – –
H2 J70 $138 $138
Heating jacket for body H29 $860 $860
Spring
High temperature alloy spring
X01 $34 $34
1.4310 X04 $34 $34
Inconel X08 $310 $310
Marking with stainless steel tag M29 $28 $28
Free of oil and grease J85 $172 $172
Connections Available connections see page 45
1) Valid for 4373 chrome steel2) See page 59 for plastic material limitations
Starting from 15 psig the safety valve is certifi ed acc. ASME Code Sec. VIII, Div. 1.*) LEOS/G = LESER Effective Orifi ce steam/gas; LEOL = LESER Effective Orifi ce liquids.
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Typ
e 4
37
43
Compact PerformanceCompact PerformanceAll prices in $
Please state O-ring material
Delivery time depends on type of connection
O-ring-disc
Options
Test gagH4 J69 – – – –
H2 J70 $138 $138 $138 $138
Heating jacket for body H29 $860 $860 $860 $860
Spring
High temperature alloy
X01 $34 $34 $34 $34
Stainless steel X04 $34 $34 $34 $34
Inconel X08 $310 $310 $310 $310
Marking with stainless steel tag M29 $28 $28 $28 $28
Free of oil and grease J85 $172 $172 $172 $172
Connections Available connections see page 45
O-ring-materialSee page 39 for elastomer limitations
NBR “N” J30Buna-N®
NBR “N” J30Buna-N®
CR “K” J21Neoprene®
CR “K” J21Neoprene®
EPDM “D” J22Buna-EP®
EPDM “D” J22Buna-EP®
FPM/FKM “L” J23Viton®
FFKM “C” J20Kalrez®
FPM/FKM “L” J23Viton®
FFKM “C” J20Kalrez®
4383: Chrome steel
Base / Inlet body 316L H2 Art. No. 4383. 2862 2862 2872 2872
Trim 316L $486 $812 $631 $1,009
Outlet body / H3 Art. No. 4383. 2863 2863
bonnet 316L pmax = 232 psig $530 $854
H4 Art. No. 4383. 2864 2864 2874 2874 $583 $904 $730 $1,108
p [psig] S/G/L 73 – 1348 73 – 1348 1349 – 1480 1349 – 1480
4384: Stainless steel
All parts 316L H2 Art. No. 4384. 2982 2982 2992 2992 $779 $1,158 $1,019 $1,397
H4 Art. No. 4384. 2984 2984 2994 2994 $925 $1,304 $1,164 $1,542
p [psig] S/G/L 73 – 986 73 – 986 987 – 1480 987 – 1480
*) LEOS/G = LESER Effective Orifi ce steam/gas; LEOL = LESER Effective Orifi ce liquids.
Type 438
Standard Long Version – for high pressures
Actual Orifi ce diameter d0 [mm] 10 10 10 10 Actual Orifi ce area A0 [inch2] 0.122 0.122 0.122 0.122
API Orifi ce designation 0.462 D 0.462 D 0.462 D 0.462 DLEOS/G*) [inch2] 0.051 0.051 0.051 0.051
LEOL*) [inch2] 0.060 0.060 0.060 0.060Weight threaded [lb] 2.6 2.6 3.1 3.1
Weight fl anged [lb] 15.5 15.5 15.5 15.5
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Typ
e 4
38
44
Compact PerformanceCompact PerformanceAll prices in $
Vulcanized soft seal for highest tightness requirements
at low set pressure
Please state soft seal material
Delivery time depends on type of connection
Vulcanized soft seal
Options
Test gagH4 J69 – –
H2 J70 $138 $138
Heating jacket for body H29 $860 $860
Spring
High temperature alloy spring
X01 $34 $34
1.4310 X04 $34 $34
Inconel X08 $310 $310
Marking with stainless steel tag M29 $28 $28
Free of oil and grease J85 $172 $172
Connections Available connections see page 45
Starting from 15 psig the safety valve is certifi ed acc. ASME Code Sec. VIII, Div. 1.*) LEOS/G = LESER Effective Orifi ce steam/gas; LEOL = LESER Effective Orifi ce liquids.
Type 439
Actual Orifi ce diameter d0 [mm] 10 10 Actual Orifi ce area A0 [inch2] 0.122 0.122
API Orifi ce designation 0.462 D 0.462 DLEOS/G*) [inch2] 0.051 0.051
LEOL*) [inch2] 0.060 0.060Weight threaded [lb] 2.6 2.6
Weight fl anged [lb] 15.5 15.5
Soft seal materialSee page 39 for elastomer limitations
NBR Buna-N® “N” J30 CR Neoprene® “K” J21 EPDM Buna-EP® “D” J22 FPM/FKM Viton® “L” J23 FFKM Kalrez® “C” J20
4393: Chrome steel
Base / Inlet body 316L H2 Art. No. 4393. 2882 2882
Trim 316L $486 $812
Outlet body / H3 Art. No. 4393. 2883 2883
bonnet 316L pmax = 145 psig $530 $854
H4 Art. No. 4393. 2884 2884 $583 $904
p [psig] S/G/L 1.5 – 230 1.5 – 230
4394: Stainless steel
All parts 316L H2 Art. No. 4394. 2892 2892 $779 $1,158
H4 Art. No. 4394. 2894 2894
$925 $1,304 p [psig] S/G/L 1.5 – 230 1.5 – 230
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Typ
e 4
39
45
Compact PerformanceCompact PerformanceAll prices in $ Available connections Series 437
Flanged and threaded connections can be combined.Threads and fl anges according to other standards, e.g. ISO, BSP, DIN, JIS are available.Please specify in writing (diameter, pressure rating, standard).
Please note: Only certain connection combinations are kept in Charlotte stock.
Please see page 193 “Availability from Charlotte stock”.
Se
rie
s 4
37
Co
nn
ec
tio
ns
Threaded connections
Valve size
d0 10 mm / 0.122 inch2
Inlet Outlet
Option
code
Additional
price
Option
code
Additional
price
Male thread ANSI/ASME B1.20.1
NPT
1/2" V61 $0 –3/4" V62 $0 –
1" V63 $0 –
Female thread ANSI/ASME B1.20.1
NPT
1/2" V58 $86 V70 $0 3/4" V59 $86 V77 $0
1" V60 $86 V71 $0
Male thread DIN ISO 228-1
G / BSPP
3/8" V49 $86 –1/2 " V54 $0 –3/4" V55 $0 –
1" V56 $0 –
Female thread DIN ISO 228-1
G / BSPP
1/2" V50 $86 V65 $120 3/4" V51 $86 V76 $120
1" V52 $86 V66 $120
Flanged connections
Flange size Additional price Class
d0 10 mm / 0.122 inch2
Option code
Inlet Outlet
ANSI/ASME B 16.5
1/2"
$241
150 V01 V24
300 V02 V13
600 V02 V13
$482
900 V03 V14
1500 V03 –
2500 V04 –
3/4"
$241
150 V05 V15
300 V06 V16
600 V06 V16
$482
900 V07 V17
1500 V07 –
2500 V08 –
1"
$241
150 V09 V18
300 V10 V19
600 V10 V19
$482
900 V11 V20
1500 V11 –
2500 V12 –
Male thread
Female thread
Flanged version
How to fi nd the price
for threaded connections
Step 1: select orifi ce size column (ex. 10 mm)
Step 2: select inlet columnStep 3: select thread type section
(ex. male thread NPT)Step 4: select size row (ex. 1")Step 5: repeat steps 1 to 4
for the outlet
How to fi nd the price
for fl anged connections
Step 1: select orifi ce size column (ex. 10 mm)
Step 2: select inlet columnStep 3: select size row (ex. 1")Step 4: select pressure class row
(ex. CL150)Step 5: repeat steps 1 to 4
for the outlet
46
Compact PerformanceCompact Performance
Metal seat
All prices in $
Delivery time depends on type of connection
Type 459
Actual Orifi ce diameter d0 [mm] 9 13 17.5
Actual Orifi ce area A0 [inch2] 0.099 0.206 0.373
API Orifi ce designation 0.749 D D F
LEOS/G*) [inch2] 0.082 0.171 0.310
LEOL*) [inch2] 0.086 0.179 0.325
API eff. Orifi ce area [inch2] – 0.110 0.307
Weight threaded [lb] 6.8 6.8 8.6
Weight fl anged [lb] 18.7 18.7 18.7
4593: SG-iron [Discontinued item]
Base / Inlet body 316L H2 Art. No. 4593. 2502 2512 2522
Trim 316L $414 $414 $508
Outlet body (Gr. 60-40-18)
or WCBH3 Art. No. 4593. 2503 2513 2523
$460 $460 $555
Bonnet (Gr. 60-40-18) H4 Art. No. 4593. 2504 2514 2524 $511 $511 $606
p [psig] S/G/L 22 – 10001) 3 – 10001) 3 – 10001)
4592: Carbon Steel
Base / Inlet body 316L H2 Art. No. 4592. 2472 2482 2492
Trim 316L $512 $512 $687
Outlet body WCB H3 Art. No. 4592. 2473 2483 2493
Bonnet SA 105or WCB
$559 $559 $732
H4 Art. No. 4592. 2474 2484 2494 $611 $611 $785
p [psig] S/G/L 22 – 3625 3 – 2900 3 – 1450
4594: Stainless steel – outlet body investment casted
Base / Inlet body 316L H2 Art. No. 4594. 2162 2172 2182
Outlet body, casted CF8M $842 $842 $1,223
Bonnet 316L or
CF8M
H4 Art. No. 4594. 2164 2174 2184 $1,134 $1,134 $1,516
p [psig] S/G/L 22 – 3625 3 – 2900 3 – 1450
4594: Stainless steel – outlet body deep-drawn
Starting from 15 psig the safety valve is certifi ed acc. ASME Code Sec. VIII, Div. 1.
1) The design of Type 4593 is permitted with limitations acc. to ASME-Code Sec VIII, Div. 1, UCD-2, UCD-3. Type 4593 shall not be used for lethal substances, irrespective of their state of aggregation.
*) LEOS/G = LESER Effective Orifi ce steam/gas; LEOL = LESER Effective Orifi ce liquids.
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Typ
e 4
59
Discontinued item Type 4593
Type 4593 will be removed from the product range end of 2015. Alterna-tively, please select Type 4592.
Please select Type 4594 investment casting
47
Compact PerformanceCompact PerformanceAll prices in $
1) Valid for SG-iron and carbon steel2) See page 59 for plastic material limitations3) Adaptor and lift indicator are available from Charlotte with stainless steel lifting device
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Typ
e 4
59
Options Type 459
Actual Orifi ce diameter d0 [mm] 9 13 17.5
Actual Orifi ce area A0 [inch2] 0.099 0.206 0.373
Weight threaded [lb] 6.8 6.8 8.6
Base / Inlet body stellited L20 $172 $172 $172
Disc stellited J25 $172 $172 –
Disc1) 316L L44 $34 $34 $34
Plastic seat2) PTFE-FDA J44 $172 $172 $172
PCTFE J48 $344 $344 $344
Vespel-SP1 J49 $516 $516 $516
Test gagH4 J69 $138 $138 $138
H2 J70 $138 $138 $138
Stainless steel bellowsp ≤ 580 psig J78 $310 $310 $310
p > 580 psig J55J78 $482 $482 $482
Elastomer bellows J79 $172 $172 $172
Heating jacket for body H29 $860 $860 $860
Spring
High temperature alloy spring
X01 $34 $34 $34
1.4310 X04 $34 $34 $34
Inconel X08 $310 $310 $310
Adaptor for lift indicator3) H4 J39 $172 $172 $172
Lift indicator3) J93 $516 $516 $516
Marking with stainless steel M29 $28 $28 $28
Free of oil and grease J85 $172 $172 $172
Gasket GYLON® (fi lled PTFE) L68 $103 $103 $103
Solar valve – Type 4592 d0 = 13 mmThe Compact Performance Safety ValveType 4592 d0 = 13 mm has among othersfollowing options:
• Inconel bellows and Inconel spring• Inlet and outlet as welding end• Sigrafl ex high pressure gasket• High temperature coating
4592.2 4824592.2482
N80 – $1,204 –
Connections Available connections see page 52 and 53
48
Compact PerformanceCompact PerformanceAll prices in $
Please state O-ring material
Delivery time depends on type of connection
O-ring-disc
Type 462
Actual Orifi ce diameter d0 [mm] 9 13 17.5 9 13 17.5 Actual Orifi ce area A0 [inch2] 0.099 0.206 0.373 0.099 0.206 0.373
API Orifi ce designation 0.749 D D F 0.749 D D FLEOS/G*) [inch2] 0.082 0.171 0.310 0.082 0.171 0.310
LEOL*) [inch2] 0.086 0.179 0.325 0.086 0.179 0.325API eff. Orifi ce area [inch2] – 0.110 0.307 – 0.110 0.307
Weight threaded [lb] 6.8 6.8 8.6 6.8 6.8 8.6Weight fl anged [lb] 18.7 18.7 18.7 18.7 18.7 18.7
O-ring-materialSee page 41 for elastomer limitations
NBR Buna-N® “N” J30 J30 J30CR Neoprene® “K” J21 J21 J21EPDM Buna-EP® “D” J22 J22 J22FPM/FKM Viton® “L” J23 J23 J23 FFKM Kalrez® “C” J20
4623: SG-iron [Discontinued item]
Base / Inlet body 316L H2 Art. No. 4623. 2902 2912 2922 2902 2912 2922
Trim 316L $606 $606 $701 $985 $985 $1,015Outlet body (Gr. 60-40-18)
or WCB
H3 Art. No. 4623. 2903 2913 2923 2903 2913 2923
$652 $652 $747 $1,031 $1,031 $1,126 Bonnet (Gr. 60-40-18) H4 Art. No. 4623. 2904 2914 2924 2904 2914 2924
$706 $706 $801 $1,085 $1,085 $1,108p [psig] S/G/L 7 – 10001) 7 – 10001) 7 – 10001) 7 – 10001) 7 – 10001) 7 – 10001)
4622: Carbon Steel
Base / Inlet body 316L H2 Art. No. 4622. 3772 3782 3792 3772 3782 3792
Trim 316L $707 $707 $880 $1,020 $1,020 $1,258 Outlet body WCB H3 Art. No. 4622. 3773 3783 3793 3773 3783 3793
Bonnet SA 105
or WCB
$752 $752 $925 $1,131 $1,131 $1,304 H4 Art. No. 4622. 3774 3784 3794 3774 3784 3794
$805 $805 $979 $1,112 $1,112 $1,357 p [psig] S/G/L 7 – 36252) 7 – 26102) 7 – 1340 7 – 1480 7 – 1480 7 – 1340
4624: Stainless steel – outlet body investment casted
Base / Inlet body 316L H2 Art. No. 4624. 2192 2202 2212 2192 2202 2212
Outlet body $1,034 $1,034 $1,415 $1,413 $1,413 $1,686casted
CF8MH4 Art. No. 4624. 2194 2204 2214 2194 2204 2214
Bonnet 316L or
CF8M
$1,326 $1,326 $1,710 $1,706 $1,706 $1,963 p [psig] S/G/L 7 – 36252) 7 – 26102) 7 – 1340 7 – 1480 7 – 1480 7 – 1340
4624: Stainless steel – outlet body deep-drawn
Starting from 15 psig the safety valve is certifi ed acc. ASME Code Sec. VIII, Div. 1.1) The design of Type 4623 is permitted with limitations acc. to ASME-Code Sec. VIII, Div. 1, UCD-2, UCD-3. Type 4623 shall not be used for lethal substances,
irrespective of their state of aggregation.2) For set pressures above 1480 psig a longer delivery time is required.
*) LEOS/G = LESER Effective Orifi ce steam/gas; LEOL = LESER Effective Orifi ce liquids.
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Typ
e 4
62
Please select Type 4624 investment casting
Discontinued item Type 4623
Type 4623 will be removed from the product range end of 2015. Alterna-tively, please select Type 4622.
49
Compact PerformanceCompact PerformanceAll prices in $
Options Type 462
Actual Orifi ce diameter d0 [mm] 9 13 17.5 9 13 17.5
Actual Orifi ce area A0 [inch2] 0.099 0.206 0.373 0.099 0.206 0.373
Weight threaded [lb] 6.8 6.8 6.8 6.8 6.8 6.8
O-ring-material NBR Buna-N® “N” J30 J30 J30
See page 39 CR Neoprene® “K” J21 J21 J21for elastomer limitations EPDM Buna-EP® “D” J22 J22 J22
FPM/FKM Viton® “L” J23 J23 J23 FFKM Kalrez® “C” J20
Test gagH4 J69 $138 $138 $138 $138 $138 $138
H2 J70 $138 $138 $138 $138 $138 $138
Stainless steel bellows1)p ≤ 580 psig J78 $310 $310 $310 $310 $310 $310
p > 580 psig J55J78 $482 $482 $482 $482 $482 $482
Elastomer bellows J79 $172 $172 $172 $172 $172 $172
Heating jacket for body H29 $860 $860 $860 $860 $860 $860
Spring
High temperature alloy spring
X01 $34 $34 $34 $34 $34 $34
1.4310 X04 $34 $34 $34 $34 $34 $34
Inconel1) X08 $310 $310 $310 $310 $310 $310
Adaptor for lift indicator H4 J39 $172 $172 $172 $172 $172 $172
Lift indicator J93 $516 $516 $516 $516 $516 $516
Marking with stainless steel tag M29 $28 $28 $28 $28 $28 $28
Free of oil and grease J85 $172 $172 $172 $172 $172 $172
Gasket GYLON® (fi lled PTFE) L68 $103 $103 $103 $103 $103 $103
Connections Available connections see page 52 and 53
1) Delivery time: 5 weeks
Typ
e 4
62
50
Compact PerformanceCompact PerformanceAll prices in $
Delivery time depends on type of connection
Metal seat, stellited
Type 459 Heavy duty design
Actual Orifi ce diameter d0 [mm] 6 9
Actual Orifi ce area A0 [inch2] 0.044 0.099
API Orifi ce designation 0.333 D 0.749 D
LEOS/G*) [inch2] 0.037 0.082
LEOL*) [inch2] 0.038 0.086
API eff. Orifi ce area [inch2] – –
Weight threaded [lb] 6.8 6.8
4954: Stainless steel – outlet body investment casted
Base / Inlet body 316L H2 Art. No. 4594. 2132 2142
Outlet body CF8M $1,062 $1,062
Bonnet 316L or
CF8M
H4 Art. No. 4594. 2134 2144 $1,354 $1,354
p [psig] S/G/L 6091 – 12325 3626 – 6090
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Starting from 15 psig the safety valve is certifi ed acc. ASME Code Sec. VIII, Div. 1.
Typ
e 4
59
HD
D
51
Compact PerformanceCompact PerformanceAll prices in $
Options Type 459 Heavy duty design
Actual Orifi ce diameter d0 [mm] 6 9
Actual Orifi ce area A0 [inch2] 0.044 0.099
Weight threated [lb] 6.8 6.8
Plastic seat1) PTFE-FDA J44 – $172
PCTFE J48 – $344
Vespel-SP1 J49 – $516
Test gagH4 J69 $138 $138
H2 J70 $138 $138
Stainless steel bellows J78 x $482
Elastomer bellows J79 x $172
Heating jacket for body H29 $860 $860
Adaptor for lift indicator H4 J39 $172 $172
Lift indicator J93 $516 $516
Marking with stainless steel tag M29 $28 $28
Free of oil and grease J85 $172 $172
Gasket GYLON® (fi lled PTFE) L68 $103 $103
Spring InconelDelivery time: 5 weeks
X08 $310 $310
Connections Available connections see page 52 and 53
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
1) See page 39 for plastic material limitations
Typ
e 4
59
HD
D
52
Compact PerformanceCompact Performance
Male thread Female thread
Available connections Series 459 All prices in $
How to fi nd the price for threaded connections
Step 1: select orifi ce size column (ex. 13 mm)Step 2: select inlet columnStep 3: select thread type section (ex. male thread NPT)Step 4: select size row (ex. 1")Step 5: repeat steps 1 to 4 for the outlet
Se
rie
s 4
59
Co
nn
ec
tio
ns
Threaded connections
Valve size d0 6 mm d0 9 mm / d0 13 mm d0 17.5 mm
Inlet Outlet Inlet Outlet Inlet Outlet
Option
code
Additional
price
Option
code
Additional
price
Option
code
Additional
price
Option
code
Additional
price
Option
code
Additional
price
Option
code
Additional
price
Male thread ANSI/ASME B1.20.1
NPT
1/2" V614) $0 – V611) $0 – – –3/4" V624) $0 – V62 $0 – – –
1" V634) $0 – V63 $0 V73 $120 V63 $0 –
11/4" – – – – V85 $86 –
11/2" – V74 $120 – V74 $120 V64 $86 V74 $120
2" – – – – V86 $86 –
Female thread ANSI/ASME B1.20.1
NPT
1/2" V584) $86 – V58 $86 – – –3/4" V594) $86 – V59 $86 – V59 $86 –
1" V604) $86 V71 $0 V60 $86 V71 $0 V60 $86 –
11/4" – V80 $120 – V80 $120 V87 $86 –
11/2" – V72 $120 – V72 $120 V75 $86 V72 $0
2" – – – – – V885) $120
Male thread DIN ISO 228-1
G / BSPP
1/2" V544) $0 – V542) $0 – – –3/4" V554) $0 – V55 $0 – – –
1" V564) $0 – V56 $0 V68 $120 V56 $0 –
11/4" – – – – V83 $86 –
11/2" – V69 $120 – V69 $120 V57 $86 V69 $120
Female thread DIN ISO 228-1
G / BSPP
1/2" V504) $86 – V50 $86 – – –3/4" V514) $86 – V51 $86 – V51 $86 –
1" – V66 $0 V523) $86 V66 $0 V52 $86 –
11/4" – V81 $120 – V81 $120 V84 $86 –
11/2" – V67 $120 – V67 $120 V53 $86 V67 $0
1) d0 13 mm: up to 1813 psig and 851 °F.2) Only for d0 9 mm3) d0 9 mm: up to PN 4204) Max. PN 700. For higher set pressures a special inlet body is necessary. (See LDeS 3001.19).5) Only for outlet body investment casted 1.0619 and 1.4408
Flanged and threaded connections can be combined. Threads according to other standards, e.g. ISO, DIN, BSP are available.Please specify in writing (diameter, pressure rating and standard).
Please note: Only certain connection combinations are kept in Charlotte stock.
Please see page 193 “Availability from Charlotte stock”.
53
Compact PerformanceCompact Performance Available connections Series 459
Flanged version
How to fi nd the price for fl anged connections
Step 1: select orifi ce size column (ex. 13 mm)Step 2: select inlet columnStep 3: select size row (ex. 1")Step 4: select pressure class row (ex. CL150)Step 5: repeat steps 1 to 4 for the outlet
All prices in $
Se
rie
s 4
59
Co
nn
ec
tio
ns
1) These connections are available for the heavy duty design 459 only.
Flanged and threaded connections can be combined. Threads according to other standards, e.g. ISO, DIN, BSP are available.Please specify in writing (diameter, pressure rating and standard).
Please note: Only certain connection combinations are kept in Charlotte stock.
Please see page 193 “Availability from Charlotte stock”.
ANSI/ASME B 16.5
Option code Option code Option code Option code
NPS Additional price CL Inlet Outlet Inlet Outlet Inlet Outlet Inlet Outlet
1/2"
$241
150 V011) – V011) – V01 – – –
300 V02 – V02 – V02 – – –
600 V02 – V02 – V02 – – –
$482
900 V03 – V03 – V03 – – –
1500 V03 – V03 – V03 – – –
2500 V04 – V04 – V04 – – –
3/4"
$241
150 V05 – V05 – V05 – V05 –
300 V06 – V06 – V06 – V06 –
600 V06 – V06 – V06 – V06 –
$482
900 V07 – V07 – V07 – V07 –
1500 V07 – V07 – V07 – V07 –
2500 V08 – V08 – V08 – V08 –
1"
$241
150 V09 V18 V09 V18 V09 V18 V09 –
300 V10 V19 V10 V19 V10 V19 V10 –
600 V10 V19 V10 V19 V10 V19 V10 –
$482
900 V11 V20 V11 V20 V11 V20 V11 –
1500 V11 – V11 – V11 – V11 –
2500 V12 – V12 – V12 – V12 –
11/2" $241
150 – – – V21 – V21 – V21
300 – – – V22 – V22 – V22
600 – – – V22 – V22 – V22
$482 900 – – – V23 – V23 – V23
Flanged connections
Valve size PricePressure
ratingd0 6 mm
0.044 inch2
d0 9 mm
0.099 inch2
d0 13 mm
0.206 inch2
d0 17.5 mm
0.373 inch2
54
Compact PerformanceCompact Performance
Se
rie
s 4
37
Sp
are
pa
rts
Spare parts
Valve size Orifi ce [inch2] Type 4373 Hardened stainless steel Type 4374 Stainless steel 316L
Disc – Type 437 metal to metal seat (Item 7)
all 0.122205.3339.9000 205.3349.9000
$48 $48
Disc – Type 438 soft seal with O-ring, disc material: 316L (Item 7)
Valve sizeOrifi ce [inch2]
O-ring size
ARP-no.
CR
Neoprene®
“K”
EPDM
Buna-EP®
“D”
FPM (FKM)
Viton®
“L”
NBR
Buna-N®
“N”
FFKM
Kalrez®
“C”
all (standard version)
0.1227/16 x 3/32
ARP 111200.8349.9751 200.8349.9741 200.8349.9771 200.8349.9781 200.8349.9791
$138 $138 $138 $138 $379
all (long version) 0.122
7/16 x 3/32
ARP 111200.8549.9053 200.8549.9042 200.8549.9073 200.8549.9083 200.8549.9091
$138 $138 $138 $138 $379
O-ring – Type 438 soft seal (Item 7.3)
all 0.1227/16 x 3/32
ARP 111502.0107.2651 502.0107.2641 502.0107.2671 502.0107.2681 502.0107.2691
$21 $21 $28 $21 $241
Disc – Type 439 with vulcanized soft seal (Item 7)
Valve size Orifi ce [inch2]
CR
Neoprene®
“K”
EPDM
Buna-EP®
“D”
FPM (FKM)
Viton®
“L”
NBR
Buna-N®
“N”
FFKM
ISOLAST®
“C”
all 0.122200.9049.9051 200.9049.9041 200.9049.9071 200.9049.9081 200.9049.9091
$172 $172 $172 $172 $413
Rollpin – Disc (Item 57)
all Type 437Stainless
steel480.2405.0000
$7
all Type 439Stainless
steel480.0305.0000
$7
Ball – Disc (Item 61)
all Stainless
steel510.0104.0000
$14
Series 437
55
Compact PerformanceCompact PerformanceSpare parts All prices in $
Se
rie
s 4
37
Sp
are
pa
rts
Size Orifi ce [inch2] Male NPT Female NPT
Inlet Bodies Type 437 Threaded connections – Material 316L (Item 1)
1/2"
0.122
V61136.4449.9204
V58136.4449.9211
$344 $344
3/4" V62136.4549.9204
V59136.4549.9211
$344 $344
1" V63136.5849.9204
V60136.5849.9211
$344 $344 Inlet Bodies Types 438 / 439 Threaded connections – Material 316L (Item 1)
Size Orifi ce [inch2] Male NPT Female NPT
1/2"
0.122
V61136.4949.9204
V58136.4949.9211
$344 $344
3/4" V62136.5449.9204
V59136.5449.9211
$344 $344
1" V63 136.6849.9204 V60 136.6849.9211
$344 $344
Series 437
Size Orifi ce [inch2] CL150 CL300 – CL2500
Inlet Bodies Type 437 Flanged connections – Material 316L (Item 1)
1/2"
0.122
V01136.4449.92021)
V02 – V04136.6349.9208
$344 $344
3/4" V05136.4549.9208
V06 – V08136.4549.9208
$344 $344
1" V09136.4449.9208
V10 – V12136.4449.9208
$344 $344 Inlet Bodies Type 438 / 439 Flanged connections – Material 316L (Item 1)
Size Orifi ce [inch2] CL150 CL300 – CL2500
1/2"
0.122
V01136.4949.92021)
V02 – V04136.4949.9208
$344 $344
3/4" V05136.5449.9208
V06 – V08136.5449.9208
$344 $344
1" V09 136.6449.9208 V10 – V12 136.6449.9208
$344 $344 1) Subassembly consisting of: inlet body, sealing part, slip on fl ange. Please note: Inlet bodies above are valid for the standard versions only. Please contact LESER for part numbers and pricing of the long versions.
56
Compact PerformanceCompact PerformanceAll prices in $
Se
rie
s 4
59
, 4
62
Sp
are
Pa
rts K
its
Spare Parts Kits
d0 6 9 13 17.5
Type 459 – 5012.1230 5012.1231 5012.1232
$154 $155 $155
Type 462 – 5012.1233 5012.1234 5012.1235
Type 462 HDD $207 $207 $207
LESER Original Spare Parts Kits – Type 459, 462, 462 HDD
Contents Type 459
Item Component Material Quantity
7 Disc 1.4404 / 316L 114 Split ring 1.4404 / 316L 2
40.3 Spacer 1.4571 / 316Ti 357 Pin 1.4310 / Edelstahl 159 Securing ring (split ring) 1.4571 / 316Ti 1
60 GasketGraphite / 1.4401
Graphite / 3162
61 Ball 1.4401 / 316 1
63 GasketGraphite / 1.4401
Graphite / 3161
The LESER Spare Parts Kits contain all the parts recommended for the regular maintenance of a LESER safety valve
Contents Type 462, 462 HDD
Item Component Material Quantity
7.1 O-ring disc body 1.4404 / 316L 17.2 Lifting aid 1.4404 / 316L 1
7.4 O-ring FKM 70/75 Shore A, FKM 90 Shore A EPDM 70 Shore A 3
7.5 Pin 1.4310 / Stainless steel 114 Split ring 1.4404 / 316L 2
40.3 Spacer 1.4571 / 316Ti 357 Pin 1.4310 / Stainless steel 159 Securing ring (split ring) 1.4571 / 316Ti 1
60 GasketGraphite / 1.4401
Graphite / 3162
61 Ball 1.4401 / 316 1
63 Gasket Graphite / 1.4401Graphite / 316
1
57
Compact PerformanceCompact PerformanceSpare parts
Series 459
Orifi ce [inch2] Type 4592 / 4593 Hardened stainless steel Type 4594 316L
Disc – Type 459 metal to metal seat (Item 7)
0.044 – 200.3969.9118
$241
0.099200.2039.9000 200.2049.9000
$138 $138
0.206200.2139.9000 200.2149.9000
$138 $138
0.373200.2239.9000 200.2249.9000
$138 $138
Disc – Type 459 plastic seat (Item 7)
Orifi ce [inch2] PTFE PCTFE
0.099200.2049.9005 200.2049.9006
$310 $482
0.206200.2149.9005 200.2149.9006
$310 $482
0.373200.2249.9005 200.2249.9006
$310 $482
Disc – Type 462 soft seal, disc material: 316L (Item 7)
Orifi ce [inch2]O-ring size
ARP-no.
CR
Neoprene®
“K”
EPDM
Buna-EP®
“D”
FPM (FKM)
Viton®
“L”
NBR
Buna-N®
“N”
FFKM
Kalrez®
“C”
0.0991/2 x 3/32
ARP 112200.9349.9051 200.9349.9041 200.9349.9071 200.9349.9081 200.9349.9091
$172 $172 $172 $172 $551
0.2069/16 x 3/32
ARP 113220.4549.9051 220.4549.9041 220.4549.9071 220.4549.9081 220.4549.9091
$172 $172 $172 $172 $551
0.37313/16 x 3/32
ARP 117220.4649.9051 220.4649.9041 220.4649.9071 220.4649.9081 220.4649.9091
$172 $172 $172 $172 $551
O-ring – Type 462 soft seal (Item 7.4)
0.0991/2 x 3/32
ARP 112502.0123.2651 502.0123.2641 502.0123.2671 502.0123.2681 502.0123.2691
$21 $21 $28 $21 $379
0.2069/16 x 3/32
ARP 113502.0139.2651 502.0139.2641 502.0139.2671 502.0139.2681 502.0139.2691
$21 $21 $28 $21 $379
0.37313/16 x 3/32
ARP 117502.0202.2651 502.0202.2641 502.0202.2671 502.0202.2681 502.0202.2691
$21 $21 $28 $21 $379
Bellows and Bellows Conversion Kits – Material 316L (Item 15)
Valve size Set pressure Bellows Conversion Kit
allp ≤ 580 psig
(40 bar)400.7949.00001) 5021.1050
$310 $310
allp > 580 psig
(40 bar)400.6349.0000 5021.1051
$482 $482
Gaskets Body – Bonnet (Item 60)
Valve size Material Gasket
allGraphite +
316 SS500.2407.0000
$14
allGylon
(fi lled PTFE)500.2405.0000
$55
Rollpin – Disc (Item 57)
all Stainless steel480.0505.0000
$7
Ball – Disc (Item 61)
all Stainless steel510.0104.0000
$14
All prices in $
Se
rie
s 4
59
Sp
are
pa
rts
1)The bellows is not completely back pressure compensating. Correction factor d0 9, d013 and d0 17.5 see LDeS 3001.19
58
Spare parts
Size Orifi ce [inch2] Male NPT Female NPT
Inlet bodies Type 459 / 462 Threaded connections – Material 316L (Item 1)
1/2"
0.044
V61136.6969.9204
V58136.6969.9211
$654 $654
3/4" V62136.7069.9204
V59136.7069.9211
$654 $654
1" V63136.7169.9204
V60136.7169.9211
$654 $654
3/4"
0.099
V62136.7549.9204
V59136.7549.9211
$516 $516
1" V63136.7649.9204
V60136.7649.9211
$516 $516
1 1/2" V64136.7849.9204
V75136.7849.9211
$516 $516
3/4"
0.206
V62136.8049.9204
V59136.8049.9211
$516 $516
1" V63136.8149.9204
V60136.8149.9211
$516 $516
1 1/2" V64136.8349.9204
V75136.8349.9211
$516 $516
1"
0.373
V63136.3649.9204
V60136.3649.9211
$654 $654
1 1/2" V64136.8649.9204
V75136.8649.9211
$654 $654
Series 459
Size Orifi ce [inch2] CL150 CL300 – CL2500
Inlet bodies Type 459 / 462 Flanged connections – Material 316L (Item 1)
1/2"
0.044
– – V02 – V04136.6969.9208
$654
3/4" V05136.7069.9208
V06 – V08136.7069.9208
$654 $654
1" V09136.7169.9208
V10 – V12136.7169.9208
$654 $654
1/2"
0.099
– – V02 – V04136.7449.9208
$516
3/4" V05136.3949.9208
V06 – V08136.3949.9208
$516 $516
1" V09136.3449.9208
V10 – V12136.3449.9208
$516 $516
1/2"
0.206
V01136.7949.92021)
V02 – V04136.7949.9208
$516 $516
3/4" V05136.5049.9208
V06 – V08136.5049.9208
$516 $516
1" V09136.3549.9208
V10 – V12136.3549.9208
$516 $516
3/4"
0.373
V05136.8449.9208
V06 – V08136.8449.9208
$654 $654
1" V09136.3649.9208
V10 – V12136.3649.9208
$654 $654
Series 459
All prices in $
Se
rie
s 4
59
Sp
are
pa
rts
1) Subassembly consisting of: inlet body, sealing part, slip on fl ange.
Compact PerformanceCompact Performance
59
Soft seal selection
CodeTrademarks
(Designation)Company
Code-
letter1)
Option
Code
Tmin TmaxApplication2)
[°F] [°C] [°F] [°C]
O-ring
CR Neoprene® DuPont K J21 -40 -40 212 100Parafi n oil, silicone oil and grease, water and waterbased solvents, refrigerants, ozone
NBR Buna-N®
(Nitrile-Butadiene) DuPont N J30 -13 -25 230 110 Hydraulic oil, vegetable and animal grease and oil
EPDMBuna-EP®
(Ethylene-Propylene-Diene)
Bayer D J22 -49 -45 302 150Hot water and superheated steam up to 302° F, several organic and inorganic acids, silicone oil and grease, FDA compliant
FPM(FKM)
Viton®
(Fluorocarbon) DuPont L J23 -4 -20 356 180
High temperature service (no steam or hot water), mineral oil and grease, silicone oil and grease, vegetable and animal grease and oil, ozone, FDA compliant compound
FFKM Kalrez®
(Perfluoro) DuPont C J20 32 0 482 250Nearly all chemicals, standard compound is Kalrez® 6230 or ISOLAST® J9515, FDA and USP VI compliant compound
Sealing plate
SP VESPEL SP-1®
(Polyimide) DuPont T J49 -454 -270 536 280High temperature and high pressure applications (no steam), for chemical resitance refer to manufactures guide
PCTFEKEL-F®
(Polychlorotrifl uor-ethylene)
3M G J48 -400 -240 302 150Cyrogenic and refrigeration applications fl ammable media, gaseous oxygene application up to 725 psig at 140 °F
PTFE Teflon®
(Polytetrafl uor ethylene) DuPont A J44 -300 -184 302 150 Nearly all chemicals
Other than listed XFor other materials
please contact LESER LLC
1) The code letters will be stamped on the disc. 2) Pressure and temperature service must be considered in any case.
Chemical resistance and the temperature limits depend on O-ring manufacturer information. LESER can not take any warranty.
Soft seal selection
Set pressure limits Sealing plate disc
MaterialPressure range
[psig] [bar] [psig] [bar]
Series 437 d0 min. max.
VESPELSP-1®
6 145 10 4786 33010 145 10 2611 180
Kel-F® 10 3 0.2 1697 117
Tefl on® 10 3 0.2 145 10
Series 459 d0 min. max.
VESPELSP-1®
9 145 10 2756 19013 145 10 2248 155
17.5 145 10 1450 100
Kel-F®
9 1 0.1 1276 88.413 1 0.1 1044 71.8
17.5 1 0.1 885 61.3
Tefl on®
9 1 0.1 145 1013 1 0.1 145 10
17.5 1 0.1 145 10
So
ft s
ea
l
se
lec
tio
n
Compact PerformanceCompact Performance
60
Compact PerformanceCompact Performance Available options
Ava
ila
ble
op
tio
ns
Heating jacket
O-ring disc
J30: NBR Buna-N® “N”J21: CR Neoprene® “K” J22: EPDM Buna-EP® “D”J23: FPM/FKM Viton® “L”J20: FFKM Kalrez® “C”
Screwed cap H2
H2
Lift indicator
J39: Adaptor for lift indicator H4J93: Lift indicator
Stainless steel bellows
J78: Closed bonnetp ≤ 580 psig
J55J78: Closed bonnetp > 580 psig
Series 459
Disc with inserted sealing plate
J44: PTFE “A”J48: PCTFE “G”J49: SP “T”
Series 437
Disc with inserted sealing plate
J44: PTFE “A”J48: PCTFE “G”J49: SP “T”
Plain lever H3
H3
Test gag
J69: H4J70: H2
Conversion kit for
stainless steel bellows
On request
Packed lever H4
H4
O-ring damper H2
J65
Special material
2.4610 Hastelloy® C42.4360 Monel® 4001.4462 Duplex
O-ring damper H4
J66
CodeYYYY
CodeXXXX
CodeZZZZ
Inconel X-750 Spring
X08
Solar valve
N80
61
Flanged Safety Relief Valves
Series 526 Page
• Type 5262 WCB 62
• Type 5264 CF8M 64
• Type 5267 WC6 66
• Type 5263 LCB 68
• Type 526X SAFUREX 70
• Options 71
• Sour gas service – NACE 74
• Outlet flange rating class 300 76
• Flange facings 78
• Weights 79
• Flange drillings acc. to DIN EN 80
Spare parts Page
• LESER Original Spare Parts Kits 82
• Type 526 Spare parts 83
• Soft seal selection 97
• Available options 98
APIAPI
AP
I
62
Type 5262 WCB
Bonnet closed open closed open closed openLifting device H2 H3 H4 H3 H2 H3 H4 H3 H2 H3 H4 H3
Flange class 150 x 150 300L x 150 300 x 150
Valve size 1 D 2 1 D 2 1 D 2
D Art. No. 5262. 0012 0013 0014 0015 0022 0023 0024 0025 0022 0023 0024 0025
$1,972 $2,058 $2,144 $2,058 $1,972 $2,058 $2,144 $2,058 $1,972 $2,058 $2,144 $2,058
E1 E 2 1 E 2 1 E 2
Art. No. 5262. 0152 0153 0154 0155 0162 0163 0164 0165 0162 0163 0164 0165
$1,972 $2,058 $2,144 $2,058 $1,972 $2,058 $2,144 $2,058 $1,972 $2,058 $2,144 $2,058
F11/2 F 2 11/2 F 2 11/2 F 2
Art. No. 5262. 0292 0293 0294 0295 0302 0303 0304 0305 0312 0313 0314 0315
$2,055 $2,140 $2,227 $2,140 $2,055 $2,140 $2,227 $2,140 $2,055 $2,140 $2,227 $2,140
G11/2 G 3 11/2 G 3 11/2 G 3
Art. No. 5262. 0452 0453 0454 0455 0462 0463 0464 0465 0472 0473 0474 0475
$2,102 $2,189 $2,275 $2,189 $2,102 $2,189 $2,275 $2,189 $2,102 $2,189 $2,275 $2,189
Flange class 150 x 150 300L x 150 300 x 150
Valve size 11/2 H 3 11/2 H 3 2 H 3
H Art. No. 5262. 1422 1423 1424 1425 1432 1433 1434 1435 1442 1443 1444 1445
$2,301 $2,386 $2,474 $2,386 $2,301 $2,386 $2,474 $2,386 $2,563 $2,683 $2,838 $2,683
J2 J 3 2 J 3 3 J 4
Art. No. 5262. 1622 1623 1624 1625 1632 1633 1634 1635 1642 1643 1644 1645
$2,890 $3,012 $3,166 $3,012 $2,890 $3,012 $3,166 $3,012 $3,615 $3,733 $3,889 $3,733
K3 K 4 3 K 4 3 K 4
Art. No. 5262. 2022 2023 2024 2025 2032 2033 2034 2035 2032 2033 2034 2035
$3,615 $3,733 $3,889 $3,733 $3,615 $3,733 $3,889 $3,733 $3,615 $3,733 $3,889 $3,733
Flange class 150 x 150 300L x 150 300 x 150
Valve size 3 L 4 3 L 4 4 L 6
L Art. No. 5262. 2322 2323 2324 2325 2332 2333 2334 2335 2342 2343 2344 2345
$3,615 $3,733 $3,889 $3,733 $3,615 $3,733 $3,889 $3,733 $5,584 $5,704 $5,859 $5,704
M4 M 6 4 M 6 4 M 6
Art. No. 5262. 5802 5803 5804 5805 5812 5813 5814 5815 5812 5813 5814 5815
$5,584 $5,704 $5,859 $5,704 $5,584 $5,704 $5,859 $5,704 $5,584 $5,704 $5,859 $5,704
N4 N 6 4 N 6 4 N 6
Art. No. 5262. 5902 5903 5904 5905 5912 5913 5914 5915 5912 5913 5914 5915
$5,748 $5,868 $6,023 $5,868 $5,748 $5,868 $6,023 $5,868 $5,748 $5,868 $6,023 $5,868
P4 P 6 4 P 6 4 P 6
Art. No. 5262. 6452 6453 6454 6455 6462 6463 6464 6465 6472 6473 6474 6475
$6,832 $6,951 $7,106 $6,951 $6,832 $6,951 $7,106 $6,951 $9,568 $9,946 $10,083 $9,946
Q6 Q 8 6 Q 8 6 Q 8
Art. No. 5262. 6572 6573 6574 6575 6582 6583 6584 6585 6582 6583 6584 6585
$9,854 $10,232 $10,369 $10,232 $9,854 $10,232 $10,369 $10,232 $9,854 $10,232 $10,369 $10,232
R6 R 8 6 R 8 6 R 10
Art. No. 5262. 6652 6653 6654 6655 6662 6663 6664 6665 6672 6673 6674 6675
$9,854 $10,232 $10,369 $10,232 $9,854 $10,232 $10,369 $10,232 $13,301 $13,680 $13,817 $13,680
T8 T 10 8 T 10 8 T 10
Art. No. 5262. 6752 6753 6754 6755 6762 6763 6764 6765 6762 6763 6764 6765
$17,902 $18,280 $18,418 $18,280 $17,902 $18,280 $18,418 $18,280 $17,902 $18,280 $18,418 $18,280
All prices in $Type 5262 WCB
Typ
e 5
26
2
WC
B
APIAPI
63
All prices in $
Type 5262 WCB
Bonnet closed open closed open closed open closed openLifting device H2 H3 H4 H3 H2 H3 H4 H3 H2 H3 H4 H3 H2 H3 H4 H3
Flange class 600 x 150 900 x 300 1500 x 300 2500 x 300
Valve size 1 D 2 11/2 D 2 11/2 D 2 11/2 D 3
D Art. No. 5262. 0032 0033 0034 0035 Please use 1500 lbs 0042 0043 0044 0045 0052 0053 0054 0055 $2,134 $2,221 $2,307 $2,221 dimensions for this size $2,281 $2,368 $2,453 $2,368 $2,857 $2,943 $3,029 $2,943
E1 E 2 11/2 E 2 11/2 E 2 11/2 E 3
Art. No. 5262. 0172 0173 0174 0175 Please use 1500 lbs 0182 0183 0184 0185 0192 0193 0194 0195 $2,134 $2,221 $2,307 $2,221 dimensions for this size $2,281 $2,368 $2,453 $2,368 $2,857 $2,943 $3,029 $2,943
F11/2 F 2 11/2 F 3 11/2 F 3 11/2 F 3
Art. No. 5262. 0322 0323 0324 0325 Please use 1500 lbs 0332 0333 0334 0335 0342 0343 0344 0345 $2,281 $2,368 $2,453 $2,368 dimensions for this size $2,496 $2,583 $2,667 $2,583 $3,696 $3,783 $3,869 $3,783
G11/2 G 3 11/2 G 3 2 G 3 2 G 3
Art. No. 5262. 0482 0483 0484 0485 0492 0493 0494 0495 0502 0503 0504 0505 0512 0513 0514 0515 $2,496 $2,583 $2,667 $2,583 $2,496 $2,583 $2,667 $2,583 $4,039 $4,158 $4,314 $4,158 $4,796 $4,916 $5,071 $4,916
Flange class 600 x 150 900 x 150 1500 x 300
Valve size 2 H 3 2 H 3 2 H 3
H Art. No. 5262. 1452 1453 1454 1455 1462 1463 1464 1465 1472 1473 1474 1475 $3,186 $3,306 $3,461 $3,306 $4,039 $4,158 $4,314 $4,158 $4,796 $4,916 $5,071 $4,916
J3 J 4 3 J 4 3 J 4
Art. No. 5262. 1652 1653 1654 1655 1662 1663 1664 1665 1672 1673 1674 1675 $4,106 $4,225 $4,380 $4,225 $4,763 $4,884 $5,039 $4,884 $5,451 $5,570 $5,725 $5,570
K3 K 4 3 K 6 3 K 6
Art. No. 5262. 2042 2043 2044 2045 2052 2053 2054 2055 2062 2063 2064 2065 $4,106 $4,225 $4,380 $4,225 $5,487 $5,606 $5,761 $5,606 $6,832 $6,951 $7,106 $6,951
Flange class 600 x 150 900 x 150 1500 x 150
Valve size 4 L 6 4 L 6 4 L 6
L Art. No. 5262. 2352 2353 2354 2355 2362 2363 2364 2365 2372 2373 2374 2375 $6,208 $6,327 $6,483 $6,327 $7,227 $7,348 $7,502 $7,348 $7,227 $7,348 $7,502 $7,348
M4 M 6 4 M 6
Art. No. 5262. 5822 5823 5824 5825 5832 5833 5834 5835 $6,208 $6,327 $6,483 $6,327 $7,227 $7,348 $7,502 $7,348
N4 N 6 4 N 6
Art. No. 5262. 5922 5923 5924 5925 5932 5933 5934 5935 $7,227 $7,348 $7,502 $7,348 $7,227 $7,348 $7,502 $7,348
P4 P 6 4 P 6
Art. No. 5262. 6482 6483 6484 6485 6492 6493 6494 6495 $9,854 $10,232 $10,369 $10,232 $9,854 $10,232 $10,369 $10,232
Q6 Q 8
Art. No. 5262. 6592 6593 6594 6595 $11,168 $11,546 $11,683 $11,546
R6 R 10
Art. No. 5262. 6682 6683 6684 6685 $13,301 $13,680 $13,817 $13,680
T8 T 10
Art. No. 5262. – – – –
Type 5262 WCB
Typ
e 5
26
2
WC
B
APIAPI
64
Type 5264 CF8M
Bonnet closed open closed open closed openLifting device H2 H3 H4 H3 H2 H3 H4 H3 H2 H3 H4 H3
Flange class 150 x 150 300L x 150 300 x 150
Valve size 1 D 2 1 D 2 1 D 2
D Art. No. 5264. 0102 – 0104 – 0112 – 0114 – 0112 – 0114 – $4,534 $4,981 $4,534 $4,981 $4,534 $4,981
E1 E 2 1 E 2 1 E 2
Art. No. 5264. 0242 – 0244 – 0252 – 0254 – 0252 – 0254 – $4,534 $4,981 $4,534 $4,981 $4,534 $4,981
F11/2 F 2 11/2 F 2 11/2 F 2
Art. No. 5264. 0392 – 0394 – 0402 – 0404 – 0412 – 0414 – $4,722 $5,169 $4,722 $5,169 $4,722 $5,169
G11/2 G 3 11/2 G 3 11/2 G 3
Art. No. 5264. 1102 – 1104 – 1112 – 1114 – 1122 – 1124 – $4,833 $5,282 $4,833 $5,282 $4,833 $5,282
Flange class 150 x 150 300L x 150 300 x 150
Valve size 11/2 H 3 11/2 H 3 2 H 3
H Art. No. 5264. 1522 – 1524 – 1532 – 1534 – 1542 – 1544 – $5,288 $5,736 $5,288 $5,736 $5,381 $6,001
J2 J 3 2 J 3 3 J 4
Art. No. 5264. 1962 – 1964 – 1972 – 1974 – 1982 – 1984 – $6,071 $6,691 $6,071 $6,691 $7,802 $8,422
K3 K 4 3 K 4 3 K 4
Art. No. 5264. 2112 – 2114 – 2122 – 2124 – 2122 – 2124 – $7,934 $8,553 $7,934 $8,553 $7,934 $8,553
Flange class 150 x 150 300L x 150 300 x 150
Valve size 3 L 4 3 L 4 4 L 6
L Art. No. 5264. 2422 – 2424 – 2432 – 2434 – 2442 – 2444 – $7,934 $8,553 $7,934 $8,553 $10,608 $11,228
M4 M 6 4 M 6 4 M 6
Art. No. 5264. 5872 – 5874 – 5882 – 5884 – 5882 – 5884 – $10,608 $11,228 $10,608 $11,228 $10,608 $11,228
N4 N 6 4 N 6 4 N 6
Art. No. 5264. 5972 – 5974 – 5982 – 5984 – 5982 – 5984 – $11,496 $12,115 $11,496 $12,115 $11,496 $12,115
P4 P 6 4 P 6 4 P 6
Art. No. 5264. 6532 – 6534 – 6542 – 6544 – 6552 – 6554 – $13,662 $14,281 $13,662 $14,281 $16,752 $17,613
Q6 Q 8 6 Q 8 6 Q 8
Art. No. 5264. 6622 – 6624 – 6632 – 6634 – 6632 – 6634 – $18,723 $19,585 $18,723 $19,585 $18,723 $19,585
R6 R 8 6 R 8 6 R 10
Art. No. 5264. 6712 – 6714 – 6722 – 6724 – 6732 – 6734 – $18,723 $19,585 $18,723 $19,585 $21,283 $22,144
T8 T 10 8 T 10 8 T 10
Art. No. 5264. 6782 – 6784 – 6792 – 6794 – 6792 – 6794 – $32,223 $33,084 $32,223 $33,084 $32,223 $33,084
All prices in $
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Type 5264 CF8M
Typ
e 5
26
4
CF
8M
APIAPI
65 LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
All prices in $
Type 5264 CF8M
Bonnet closed open closed open closed open closed openLifting device H2 H3 H4 H3 H2 H3 H4 H3 H2 H3 H4 H3 H2 H3 H4 H3
Flange class 600 x 150 900 x 300 1500 x 300 2500 x 300
Valve size 1 D 2 11/2 D 2 11/2 D 2 11/2 D 3
D Art. No. 5264. 0122 – 0124 – Please use 1500 lbs 0132 – 0134 – 0142 – 0144 – $4,805 $5,253 dimensions for this size $4,908 $5,355 $5,576 $6,023
E1 E 2 11/2 E 2 11/2 E 2 11/2 E 3
Art. No. 5264. 0262 – 0264 – Please use 1500 lbs 0272 – 0274 – 0282 – 0284 – $4,805 $5,253 dimensions for this size $4,908 $5,355 $5,576 $6,023
F11/2 F 2 11/2 F 3 11/2 F 3 11/2 F 3
Art. No. 5264. 0422 – 0424 – Please use 1500 lbs 0432 – 0434 – 0442 – 0444 – $5,138 $5,584 dimensions for this size $5,244 $5,691 $7,204 $7,654
G11/2 G 3 11/2 G 3 2 G 3 2 G 3
Art. No. 5264. 1132 – 1134 – 1142 – 1144 – 1152 – 1154 – 1162 – 1164 – $5,244 $5,691 $5,244 $5,691 $6,870 $7,489 $7,671 $8,292
Flange class 600 x 150 900 x 150 1500 x 300
Valve size 2 H 3 2 H 3 2 H 3
H Art. No. 5264. 1552 – 1554 – 1562 – 1564 – 1572 – 1574 – $6,691 $7,311 $6,870 $7,489 $7,671 $8,292
J3 J 4 3 J 4 3 J 4
Art. No. 5264. 1992 – 1994 – 2002 - 2004 – 2012 – 2014 – $7,802 $8,422 $8,096 $8,717 $8,723 $9,343
K3 K 4 3 K 6 3 K 6
Art. No. 5264. 2132 – 2134 – 2142 - 2144 – 2152 – 2154 – $7,934 $8,553 $9,323 $9,943 $10,930 $11,551
Flange class 600 x 150 900 x 150 1500 x 150
Valve size 4 L 6 4 L 6 4 L 6
L Art. No. 5264. 2452 – 2454 – 2462 – 2464 – – – – – $11,796 $12,417 $12,286 $12,905
M4 M 6 4 M 6
Art. No. 5264. 5892 – 5894 – – – – – $11,796 $12,417
N4 N 6 4 N 6
Art. No. 5264. 5992 – 5994 – – – – – $12,286 $12,905
P4 P 6 4 P 6
Art. No. 5264. 6562 – 6564 – – – – – $16,752 $17,613
Q6 Q 8
Art. No. 5264. 6642 – 6644 – $18,723 $19,585
R6 R 10
Art. No. 5264. 6742 – 6744 – $21,283 $22,144
T8 T 10
Art. No. 5264. – – – –
Type 5264 CF8M
Typ
e 5
26
4
CF
8M
APIAPI
66
Type 5267 WC61)
Bonnet closed open closed open closed openLifting device H2 H3 H4 H3 H2 H3 H4 H3 H2 H3 H4 H3
Flange class 150 x 150 300L x 150 300 x 150
Valve size 1 D 2 1 D 2 1 D 2
D Art. No. 5267. – – – – – – – – 0062 0063 0064 0065 $3,626 $3,713 $3,799 $3,713
E1 E 2 1 E 2 1 E 2
Art. No. 5267. – – – – – – – – 0202 0203 0204 0205 $3,626 $3,713 $3,799 $3,713
F11/2 F 2 11/2 F 2 11/2 F2
Art. No. 5267. – – – – – – – – 0352 0353 0354 0355 $3,776 $3,863 $3,949 $3,863
G11/2 G 3 11/2 G 3 11/2 G 3
Art. No. 5267. – – – – – – – – 0522 0523 0524 0525 $3,869 $3,955 $4,042 $3,955
Flange class 150 x 150 300L x 150 300 x 150
Valve size 11/2 H 3 11/2 H 3 2 H 3
H Art. No. 5267. – – – – – – – – 1482 1483 1484 1485 $4,304 $4,424 $4,578 $4,424
J2 J 3 2 J 3 3 J 4
Art. No. 5267. – – – – – – – – 1682 1683 1684 1685 $6,240 $6,360 $6,515 $6,360
K3 K 4 3 K 4 3 K 4
Art. No. 5267. – – – – – – – – 2072 2073 2074 2075 $6,346 $6,465 $6,621 $6,465
Flange class 150 x 150 300L x 150 300 x 150
Valve size 3 L 4 3 L 4 4 L 6
L Art. No. 5267. – – – – – – – – 2382 2383 2384 2385 $8,486 $8,606 $8,761 $8,606
M4 M 6 4 M 6 4 M 6
Art. No. 5267. – – – – – – – – 5842 5843 5844 5845 $8,486 $8,606 $8,761 $8,606
N4 N 6 4 N 6 4 N 6
Art. No. 5267. – – – – – – – – 5942 5943 5944 5945 $9,196 $9,316 $9,471 $9,316
P4 P 6 4 P 6 4 P 6
Art. No. 5267. – – – – – – – – 6502 6503 6504 6505 $13,401 $13,779 $13,917 $13,779
Q6 Q 8 6 Q 8 6 Q 8
Art. No. 5267. – – – – – – – – 6602 6603 6604 6605 $14,979 $15,357 $15,494 $15,357
R6 R 8 6 R 8 6 R 10
Art. No. 5267. – – – – 6692 6693 6694 6695 – – – – $17,027 $17,406 $17,543 $17,406
T8 T 10 8 T 10 8 T 10
Art. No. 5267. – – – – – – – – 6772 6773 6774 6775 $25,779 $26,157 $26,294 $26,157
All prices in $Type 5267 WC6
Typ
e 5
26
7
WC
6
APIAPI
1)H01 Inlet body certificate is not available for the 5267. Please see option pricing for H09 on page 53.
67
All prices in $
Bonnet closed open closed open closed open closed openLifting device H2 H3 H4 H3 H2 H3 H4 H3 H2 H3 H4 H3 H2 H3 H4 H3Flange class 600 x 150 900 x 300 1500 x 300 2500 x 300
Valve size 1 D 2 11/2 D 2 11/2 D 2 11/2 D 3
D Art. No. 5267. 0072 0073 0074 0075 Please use 1500 lbs 0082 0083 0084 0085 0092 0093 0094 0095 $3,844 $3,931 $4,016 $3,931 dimensions for this size $3,924 $4,009 $4,095 $4,009 $4,458 $4,543 $4,629 $4,543
E1 E 2 11/2 E 2 11/2 E 2 11/2 E 3
Art. No. 5267. 0212 0213 0214 0215 Please use 1500 lbs 0222 0223 0224 0225 0232 0233 0234 0235 $3,844 $3,931 $4,016 $3,931 dimensions for this size $3,924 $4,009 $4,095 $4,009 $4,458 $4,543 $4,629 $4,543
F11/2 F 2 11/2 F 3 11/2 F 3 11/2 F 3
Art. No. 5267. 0362 0363 0364 0365 Please use 1500 lbs 0372 0373 0374 0375 0382 0383 0384 0385 $4,109 $4,195 $4,282 $4,195 dimensions for this size $4,195 $4,282 $4,369 $4,282 $5,763 $5,851 $5,937 $5,851
G11/2 G 3 11/2 G 3 2 G 3 2 G 3
Art. No. 5267. 0532 0533 0534 0535 0542 0543 0544 0545 0552 0553 0554 0555 0562 0563 0564 0565 $4,195 $4,282 $4,369 $4,282 $4,195 $4,282 $4,369 $4,282 $5,496 $5,614 $5,770 $5,614 $6,138 $6,257 $6,413 $6,257
Flange class 600 x 150 900 x 150 1500 x 300
Valve size 2 H 3 2 H 3 2 H 3
H Art. No. 5267. 1492 1493 1494 1495 1502 1503 1504 1505 1512 1513 1514 1515 $5,355 $5,475 $5,630 $5,475 $5,496 $5,614 $5,770 $5,614 $6,138 $6,257 $6,413 $6,257
J3 J 4 3 J 4 3 J 4
Art. No. 5267. 1692 1693 1694 1695 1702 1703 1704 1705 1712 1713 1714 1715 $6,240 $6,360 $6,515 $6,360 $6,477 $6,596 $6,751 $6,596 $6,981 $7,101 $7,257 $7,101
K3 K 4 3 K 6 3 K 6
Art. No. 5267. 2082 2083 2084 2085 2092 2093 2094 2095 2102 2103 2104 2105 $6,346 $6,465 $6,621 $6,465 $7,460 $7,580 $7,735 $7,580 $8,744 $8,865 $9,020 $8,865
Flange class 600 x 150 900 x 150 1500 x 150
Valve size 4 L 6 4 L 6 4 L 6
L Art. No. 5267. 2392 2393 2394 2395 2402 2403 2404 2405 2412 2413 2414 2415 $9,436 $9,555 $9,710 $9,555 $9,828 $9,948 $10,103 $9,948 $9,828 $9,948 $10,103 $9,948
M4 M 6 4 M 6
Art. No. 5267. 5852 5853 5854 5855 5862 5863 5864 5865 $9,436 $9,555 $9,710 $9,555 $9,828 $9,948 $10,103 $9,948
N4 N 6 4 N 6
Art. No. 5267. 5952 5953 5954 5955 5962 5963 5964 5965 $9,828 $9,948 $10,103 $9,948 $9,828 $9,948 $10,103 $9,948
P4 P 6 4 P 6
Art. No. 5267. 6512 6513 6514 6515 6522 6523 6524 6525 $13,401 $13,779 $13,917 $13,779 $13,401 $13,779 $13,917 $13,779
Q6 Q 8
Art. No. 5267. 6612 6613 6614 6615 $14,979 $15,357 $15,494 $15,357
R6 R 10
Art. No. 5267. 6702 6703 6704 6705 $17,033 $17,411 $17,549 $17,411
T8 T 10
Art. No. 5267. – – – –
Type 5267 WC61)
Type 5267 WC6
Typ
e 5
26
7
WC
6
APIAPI
1)H01 Inlet body certificate is not available for the 5267. Please see option pricing
for H09 on page 53.
68
Type 5263 LCB
Bonnet closed open closed open closed openLifting device H2 H3 H4 H3 H2 H3 H4 H3 H2 H3 H4 H3
Flange class 150 x 150 300L x 150 300 x 150
Valve size 1 D 2 1 D 2 1 D 2
D Art. No. 5263. 5002 5003 5004 5005 5012 5013 5014 5015 5012 5013 5014 5015 $2,167 $2,255 $2,341 $2,255 $2,167 $2,255 $2,341 $2,255 $2,167 $2,255 $2,341 $2,255
E1 E 2 1 E 2 1 E 2
Art. No. 5263. 5052 5053 5054 5055 5062 5063 5064 5065 5062 5063 5064 5065 $2,167 $2,255 $2,341 $2,255 $2,167 $2,255 $2,341 $2,255 $2,167 $2,255 $2,341 $2,255
F11/2 F 2 11/2 F 2 11/2 F 2
Art. No. 5263. 5102 5103 5104 5105 5112 5113 5114 5115 5122 5123 5124 5125 $2,260 $2,347 $2,434 $2,347 $2,260 $2,347 $2,434 $2,347 $2,260 $2,347 $2,434 $2,347
G11/2 G 3 11/2 G 3 11/2 G 3
Art. No. 5263. 5162 5163 5164 5165 5172 5173 5174 5175 5182 5183 5184 5185 $2,314 $2,400 $2,485 $2,400 $2,314 $2,400 $2,485 $2,400 $2,314 $2,400 $2,485 $2,400
Flange class 150 x 150 300L x 150 300 x 150
Valve size 11/2 H 3 11/2 H 3 2 H 3
H Art. No. 5263. 5232 5233 5234 5235 5242 5243 5244 5245 5252 5253 5254 5255 $2,530 $2,617 $2,703 $2,617 $2,530 $2,617 $2,703 $2,617 $2,818 $2,939 $3,092 $2,939
J2 J 3 2 J 3 3 J 4
Art. No. 5263. 5292 5293 5294 5295 5302 5303 5304 5305 5312 5313 5314 5315 $3,181 $3,300 $3,455 $3,300 $3,181 $3,300 $3,455 $3,300 $3,975 $4,094 $4,250 $4,094
K3 K 4 3 K 4 3 K 4
Art. No. 5263. 5352 5353 5354 5355 5362 5363 5364 5365 5362 5363 5364 5365 $3,975 $4,094 $4,250 $4,094 $3,975 $4,094 $4,250 $4,094 $3,975 $4,094 $4,250 $4,094
Flange class 150 x 150 300L x 150 300 x 150
Valve size 3 L 4 3 L 4 4 L 6
L Art. No. 5263. 5402 5403 5404 5405 5412 5413 5414 5415 5422 5423 5424 5425 $3,975 $4,094 $4,250 $4,094 $3,975 $4,094 $4,250 $4,094 $6,144 $6,264 $6,419 $6,264
M4 M 6 4 M 6 4 M 6
Art. No. 5263. 5462 5463 5464 5465 5472 5473 5474 5475 5472 5473 5474 5475 $6,144 $6,264 $6,419 $6,264 $6,144 $6,264 $6,419 $6,264 $6,144 $6,264 $6,419 $6,264
N4 N 6 4 N 6 4 N 6
Art. No. 5263. 5502 5503 5504 5505 5512 5513 5514 5515 5512 5513 5514 5515 $6,323 $6,443 $6,598 $6,443 $6,323 $6,443 $6,598 $6,443 $6,323 $6,443 $6,598 $6,443
P4 P 6 4 P 6 4 P 6
Art. No. 5263. 5542 5543 5544 5545 5552 5553 5554 5555 5562 5563 5564 5565 $7,515 $7,635 $7,791 $7,635 $7,515 $7,635 $7,791 $7,635 $10,525 $10,903 $11,041 $10,903
Q6 Q 8 6 Q 8 6 Q 8
Art. No. 5263. 5592 5593 5594 5595 5602 5603 5604 5605 5602 5603 5604 5605 $10,838 $11,217 $11,355 $11,217 $10,838 $11,217 $11,355 $11,217 $10,838 $11,217 $11,355 $11,217
R6 R 8 6 R 8 6 R 10
Art. No. 5263. 5622 5623 5624 5625 5632 5633 5634 5635 5642 5643 5644 5645 $10,838 $11,217 $11,355 $11,217 $10,838 $11,217 $11,355 $11,217 $14,632 $15,011 $15,148 $15,011
T8 T 10 8 T 10 8 T 10
Art. No. 5263. 5662 5663 5664 5665 5672 5673 5674 5675 5672 5673 5674 5675 $19,692 $20,071 $20,209 $20,071 $19,692 $20,071 $20,209 $20,071 $19,692 $20,071 $20,209 $20,071
All prices in $Type 5263 LCB
Typ
e 5
26
3
LC
B
APIAPI
69
All prices in $
Bonnet closed open closed open closed open closed openLifting device H2 H3 H4 H3 H2 H3 H4 H3 H2 H3 H4 H3 H2 H3 H4 H3Flange class 600 x 150 900 x 300 1500 x 300 2500 x 300
Valve size 1 D 2 11/2 D 2 11/2 D 2 11/2 D 3
D Art. No. 5263. 5022 5023 5024 5025 Please use 1500 lbs 5032 5033 5034 5035 5042 5043 5044 5045 $2,348 $2,435 $2,522 $2,435 dimensions for this size $2,510 $2,596 $2,683 $2,596 $3,143 $3,229 $3,314 $3,229
E1 E 2 11/2 E 2 11/2 E 2 11/2 E 3
Art. No. 5263. 5072 5073 5074 5075 Please use 1500 lbs 5082 5083 5084 5085 5092 5093 5094 5095 $2,348 $2,435 $2,522 $2,435 dimensions for this size $2,510 $2,596 $2,683 $2,596 $3,143 $3,229 $3,314 $3,229
F11/2 F 2 11/2 F 3 11/2 F 3 11/2 F 3
Art. No. 5263. 5132 5133 5134 5135 Please use 1500 lbs 5142 5143 5144 5145 5152 5153 5154 5155 $2,510 $2,596 $2,683 $2,596 dimensions for this size $2,745 $2,831 $2,917 $2,831 $4,066 $4,153 $4,238 $4,153
G11/2 G 3 11/2 G 3 2 G 3 2 G 3
Art. No. 5263. 5192 5193 5194 5195 5202 5203 5204 5205 5212 5213 5214 5215 5222 5223 5224 5225 $2,745 $2,831 $2,917 $2,831 $2,745 $2,831 $2,917 $2,831 $4,443 $4,563 $4,718 $4,563 $5,276 $5,394 $5,549 $5,394
Flange class 600 x 150 900 x 150 1500 x 300
Valve size 2 H 3 2 H 3 2 H 3
H Art. No. 5263. 5262 5263 5264 5265 5272 5273 5274 5275 5282 5283 5284 5285 $3,504 $3,623 $3,778 $3,623 $4,443 $4,563 $4,718 $4,563 $5,276 $5,394 $5,549 $5,394
J3 J 4 3 J 4 3 J 4
Art. No. 5263. 5322 5323 5324 5325 5332 5333 5334 5335 5342 5343 5344 5345 $4,516 $4,637 $4,791 $4,637 $5,240 $5,360 $5,514 $5,360 $5,996 $6,115 $6,271 $6,115
K3 K 4 3 K 6 3 K 6
Art. No. 5263. 5372 5373 5374 5375 5382 5383 5384 5385 5392 5393 5394 5395 $4,516 $4,637 $4,791 $4,637 $6,034 $6,153 $6,309 $6,153 $7,515 $7,635 $7,791 $7,635
Flange class 600 x 150 900 x 150 1500 x 150
Valve size 4 L 6 4 L 6 4 L 6
L Art. No. 5263. 5432 5433 5434 5435 5442 5443 5444 5445 5452 5453 5454 5455 $6,829 $6,949 $7,104 $6,949 $7,950 $8,069 $8,225 $8,069 $7,950 $8,069 $8,225 $8,069
M4 M 6 4 M 6
Art. No. 5263. 5482 5483 5484 5485 5492 5493 5494 5495 $6,829 $6,949 $7,104 $6,949 $7,950 $8,069 $8,225 $8,069
N4 N 6 4 N 6
Art. No. 5263. 5522 5523 5524 5525 5532 5533 5534 5535 $7,950 $8,069 $8,225 $8,069 $7,950 $8,069 $8,225 $8,069
P4 P 6 4 P 6
Art. No. 5263. 5572 5573 5574 5575 5582 5583 5584 5585 $10,838 $11,217 $11,355 $11,217 $10,838 $11,217 $11,355 $11,217
Q6 Q 8
Art. No. 5263. 5612 5613 5614 5615 $12,284 $12,663 $12,800 $12,663
R6 R 10
Art. No. 5263. 5652 5653 5654 5655 $14,632 $15,011 $15,148 $15,011
T8 T 10
Art. No. 5263. – – – –
Type 5263 LCB
Type 5263 LCB
Typ
e 5
26
3
LC
B
APIAPI
70
APIAPIAll prices in $Product solution: Urea Synthesis design
Typ
e 5
26X
SA
FU
RE
X
UREA Synthesis section safety valve
Valve size 3 x 4
Standard Orifi ce acc. to API 526 J
Weight
Body material: SAFUREX
Flange rating class
PN 325 x CL300Art. No. 526X. 9052
on request
Body material: other materials
Flange rating class
PN 325 x CL300Art. No. 526X. XXXX
on request
Application-oriented valve confi guration for urea syn-thesis section and other applications with corrosive and sticky media. Due to the steam-purged design the cry-stallization of the carbamat gas is prevented.
Design features:
– block body design in Safurex (subject to licensor appro-val) or other corrosion-resistant materials
– steam-purged design
For detailed information please see specifi cation sheet LID_DE_1352.03 or Sales brief Urea Plants (0777.5744).
71
API
Typ
e 5
26
Op
tio
ns
Type 526 Options
Special machining of fl angeMaterial test
certifi cate
Heating jacket for bodyDelivery time: 9 – 13 weeks Free of
oil and
grease
SpringRTJ-
grooveDIN-drilling3) Body 5267
5262,
52675264
Bonnet
spacer1)
Valve
size
Flange
class
Inlet
Inlet
L58 Inlet Outlet
EN 10204 – 3.2
H33 J85
1.4310
X04
Inconel
X085)H09
1 D 2 150 – 300L $172 $172 $172 – $2,409 $1,893 $1,204 $447 $155 $860
1 D 2 300 – 600 $172 $172 $172 $344 $2,409 $1,893 $1,204 $447 $155 $860
11/2 D 2 900 – 1500 $172 $172 $172 $344 – – – $482 $172 $1,118
11/2 D 3 2500 $172 $172 $172 $344 – – – $482 $172 $1,118
1 E 2 150 – 300L $172 $172 $172 – $2,409 $1,893 $1,204 $447 $155 $860
1 E 2 300 – 600 $172 $172 $172 $344 $2,409 $1,893 $1,204 $447 $155 $860
11/2 E 2 900 – 1500 $172 $172 $172 $344 – – $1,204 $482 $172 $1,118
11/2 E 3 2500 $172 $172 $172 $344 – – – $482 $172 $1,118
11/2 F 2 150 – 300L $172 $172 $172 – $2,409 $1,893 $1,204 $482 $172 $1,118
11/2 F 2 300 – 600 $172 $172 $172 $344 $2,409 $1,893 $1,204 $482 $172 $1,118
11/2 F 3 900 – 2500 $172 $172 $172 $344 – – – $482 $172 $1,118
11/2 G 3 150 – 300L $172 $172 $172 – $3,097 $2,409 $1,204 $482 $172 $1,118
11/2 G 3 300 – 900 $172 $172 $172 $344 $3,097 $2,409 $1,204 $482 $172 $1,118
2 G 3 1500 – 2500 $172 $172 $172 $344 – – $2,065 $551 $172 $1,720
11/2 H 3 150 – 300L $172 $172 $172 – $3,097 $2,409 $1,204 $482 $172 $1,118
2 H 3 300 $172 $172 $172 $344 $3,097 $2,409 $2,065 $551 $172 $1,720
2 H 3 600 – 1500 $172 $172 $172 $344 $3,097 $2,409 $2,065 $551 $172 $1,720
2 J 3 150 – 300L $275 $275 $275 – $3,097 $2,409 $2,065 $551 $172 $1,720
3 J 4 300 $275 $275 $275 $516 $3,441 $3,441 $2,065 $654 $275 $2,409
3 J 4 600 – 1500 $275 $275 $275 $516 $3,441 $3,441 $2,065 $654 $275 $2,409
3 K 4 150 – 300L $275 $275 $275 – $3,441 $3,441 $2,065 $654 $275 $2,409
3 K 4 300 – 600 $275 $275 $275 $516 $3,441 $3,441 $2,065 $654 $275 $2,409
3 K 6 900 – 1500 $275 $275 $275 $516 $4,473 $4,473 $2,065 2) $654 $688 $4,817
3 L 4 150 – 300L $275 $275 $275 – $3,441 $3,441 $2,065 $654 $275 $2,409
4 L 6 300 $275 $275 $275 $516 $4,473 $4,473 $2,065 $860 $688 $4,817
4 L 6 600 – 1500 $275 $275 $275 $516 – – $2,065 $860 $688 $4,817
4 M 6 150 – 300L $275 $275 $275 – $4,473 $4,473 $2,065 $860 $688 $4,817
4 M 6 300 – 900 $275 $275 $275 $516 $4,473 4) $4,473 4) $2,065 $860 $688 $4,817
4 N 6 150 – 300L $275 $275 $275 – $4,473 $4,473 $2,065 $860 $688 $4,817
4 N 6 300 – 900 $275 $275 $275 $516 $4,473 $4,473 $2,065 $860 $688 $4,817
4 P 6 150 – 300L $275 $275 $275 – $4,473 $4,473 $2,065 $860 $688 $4,817
4 P 6 300 – 900 $275 $275 $275 $516 $4,473 $4,473 $2,065 $860 $1,376 $4,817
6 Q 8 150 – 300L $516 $516 $516 – $6,882 $6,882 $2,065 $860 $1,376 $7,914
6 Q 8 300 – 600 $516 $516 $516 $688 $6,882 $6,882 $2,065 $860 $1,376 $7,914
6 R 8 150 $516 $516 $516 – $6,882 $6,882 $2,065 $860 $1,376 $7,914
6 R 8 300L $516 $516 $516 $688 $6,882 $6,882 $2,065 $860 $1,376 $7,914
6 R 10 300 $516 $516 $516 – – – – $860 on request
on request6 R 10 600 $516 $516 $516 $688 – – – $860
8 T 10 150 – 300L $516 $516 $516 – $9,635 $9,635 – $860 on request
on request8 T 10 300 $516 $516 $516 $688 $9,635 $9,635 – $860
All prices in $
1) Required if safety valve is fi tted with bellows4) For class 300 only
2) Bonnet spacer only required for: 3K6, WC6, CL9005) Delivery time 5 weeks
3) For option code please refer to page 806) High temperature bellows (J88) available only with an
open bonnet.
72
Type 526 Options
DiscNozzle
Balanced bellows
Bolted cap
H1
Bolted lifting
device
H6
stellited
O-ring disc1) 316L
stellited316L
5262 5267
InconelHigh
temp.5263
5264
Valve
size
Flange
class
Inlet
CR “K” J21 FFKM Type Carbon
steel
Stainless
steel
Carbon
steel
Stain-
less
steelEPDM “D” J22 “C” 5267
FKM “L” J23 J20 J25 L44 L62 J82 J83 J882) K01 K06
1 D 2 150 – 300L $120 $379 $172 $62 $172 – $1,548 $482 – $138 $172 $344 $413
1 D 2 300 – 600 $120 $379 $172 $62 $172 * $1,548 $482 $654 $138 $172 $344 $413
11/2 D 2 900 – 1500 $120 $379 $172 $62 * * $1,893 $946 $1,290 $138 $172 $344 $413
11/2 D 3 2500 $120 $379 $172 $62 * * $1,893 $946 $1,290 $138 $172 $344 $413
1 E 2 150 – 300L $120 $379 $172 $62 $172 – $1,548 $482 – $138 $172 $344 $413
1 E 2 300 – 600 $120 $379 $172 $62 $172 * $1,548 $482 $654 $138 $172 $344 $413
11/2 E 2 900 – 1500 $120 $379 $172 $62 * * $1,893 $946 $1,290 $138 $172 $344 $413
11/2 E 3 2500 $120 $379 $172 $62 * * $1,893 $946 $1,290 $138 $172 $344 $413
11/2 F 2 150 – 300L $155 $619 $344 $86 $344 – $1,893 $946 – $138 $172 $344 $413
11/2 F 2 300 – 600 $155 $619 $344 $86 $344 * $1,893 $946 $1,290 $138 $172 $344 $413
11/2 F 3 900 – 2500 $155 $619 $344 $86 * * $1,893 $946 $1,290 $138 $172 $344 $413
11/2 G 3 150 – 300L $155 $619 $344 $86 $344 – $1,893 $946 – $138 $172 $344 $413
11/2 G 3 300 – 900 $155 $619 $344 $86 $344 * $1,893 $946 $1,290 $138 $172 $344 $413
2 G 3 1500 – 2500 $155 $619 $344 $86 * * $2,237 $1,290 $1,720 $206 $275 $585 $654
11/2 H 3 150 – 300L $155 $619 $344 $86 $344 – $1,893 $946 – $138 $172 $344 $413
2 H 3 300 $155 $619 $344 $86 $344 * $2,237 $1,290 $1,720 $206 $275 $585 $654
2 H 3 600 – 1500 $155 $619 $344 $86 * * $2,237 $1,290 $1,720 $206 $275 $585 $654
2 J 3 150 – 300L $275 $1,376 $344 $86 $344 – $2,581 $1,290 – $206 $275 $585 $654
3 J 4 300 $275 $1,376 $344 $86 * * $2,753 $1,548 $2,065 $206 $275 $585 $654
3 J 4 600 – 1500 $275 $1,376 $344 $86 * * $2,753 $1,548 $2,065 $206 $275 $585 $654
3 K 4 150 – 300L $275 $1,376 $516 $120 $516 – $2,753 $1,548 – $206 $275 $585 $654
3 K 4 300 – 600 $275 $1,376 $516 $120 $516 * $2,753 $1,548 $2,065 $206 $275 $585 $654
3 K 6 900 – 1500 $275 $1,376 $516 $120 * * $3,613 $2,581 $3,441 $206 $275 $585 $654
3 L 4 150 – 300L $447 $2,237 $516 $120 $516 – $2,753 $1,548 – $206 $275 $585 $654
4 L 6 300 $447 $2,237 $516 $120 * * $3,613 $2,581 $3,441 $206 $275 $585 $654
4 L 6 600 – 1500 $447 $2,237 $516 $120 * * $3,613 $2,581 $3,441 $206 $275 $585 $654
4 M 6 150 – 300L $447 $2,237 $688 $155 * – $4,301 $2,581 – $206 $275 $585 $654
4 M 6 300 – 900 $447 $2,237 $688 $155 * * $4,301 $2,581 $3,441 $206 $275 $585 $654
4 N 6 150 – 300L $447 $2,237 $688 $155 * – $4,301 $2,581 – $206 $275 $585 $654
4 N 6 300 – 900 $447 $2,237 $688 $155 * * $4,301 $2,581 $3,441 $206 $275 $585 $654
4 P 6 150 – 300L $447 $2,237 $688 $155 * – $4,301 $2,581 – $206 $275 $585 $654
4 P 6 300 – 900 $447 $2,237 $688 $155 * * $5,333 $3,957 $5,333 $413 $482 $826 $946
6 Q 8 150 – 300L $447 $2,237 $860 $172 * – $6,538 $3,957 – $413 $482 $826 $946
6 Q 8 300 – 600 $447 $2,237 $860 $172 * * $5,333 $3,957 $5,333 $413 $482 $826 $946
6 R 8 150 $447 $2,237 $860 $172 * – $8,946 $3,957 – $413 $482 $826 $946
6 R 8 300L $447 $2,237 $860 $172 * * $8,946 $3,957 $5,333 $413 $482 $826 $946
6 R 10 300 $447 $2,237 $860 $172 * * $9,979 $5,505 – $413 $482 $826 $946
6 R 10 600 $447 $2,237 $860 $172 * * $9,979 $5,505 $7,226 $413 $482 $826 $946
8 T 10 150 – 300L $826 $3,097 $1,032 $206 * – $9,979 $5,505 – * $482 * $946
8 T 10 300 $826 $3,097 $1,032 $206 * * $9,979 $5,505 $7,226 * $482 * $946
1) See page 97 for elastomer limitations2)J88 available only with open bonnet
Typ
e 5
26
Op
tio
ns
All prices in $
APIAPI
73
Typ
e 5
26
Op
tio
ns
APIAPI
1) Material test certifi cate 3.1 according to EN 10204. Testing of nozzle and disc. Maximum hardness 22 HRC.NACE charges depend on required options. Please see charts on page 54 for required options.
2) Delivery times 10 weeks ex works Hohenwestedt
Valve
size
Flange
class
Inlet
Adaptor for
lift indicatorLift
indicator
Test gag Marking with
stainless steel
tag
Bug screen NACE1) High pressure
design2)
H2 H4
J39 J93 J70 J69 M29 M70 N77, N78 Z90
1 D 2 150 – 300L $172 $516 $138 $138 $28 $241 $120 –
1 D 2 300 – 600 $172 $516 $138 $138 $28 $241 $120 –
11/2 D 2 900 – 1500 $172 $516 $138 $138 $28 $241 $120 –
11/2 D 3 2500 $172 $516 $138 $138 $28 $241 $120 –
1 E 2 150 – 300L $172 $516 $138 $138 $28 $241 $120 –
1 E 2 300 – 600 $172 $516 $138 $138 $28 $241 $120 –
11/2 E 2 900 – 1500 $172 $516 $138 $138 $28 $241 $120 –
11/2 E 3 2500 $172 $516 $138 $138 $28 $241 $120 –
11/2 F 2 150 – 300L $172 $516 $138 $138 $28 $241 $120 –
11/2 F 2 300 – 600 $172 $516 $138 $138 $28 $241 $120 –
11/2 F 3 900 – 2500 $172 $516 $138 $138 $28 $241 $120 –
11/2 G 3 150 – 300L $172 $516 $138 $138 $28 $241 $120 –
11/2 G 3 300 – 900 $172 $516 $138 $138 $28 $241 $120 –
2 G 3 1500 – 2500 $172 $516 $138 $138 $28 $241 $120 –
11/2 H 3 150 – 300L $172 $516 $138 $138 $28 $241 $120 –
2 H 3 300 $172 $516 $138 $138 $28 $241 $120 –
2 H 3 600 – 1500 $172 $516 $138 $138 $28 $241 $120 –
2 J 3 150 – 300L $172 $516 $138 $138 $28 $241 $120 –
3 J 4 300 $172 $516 $138 $138 $28 $241 $120 –
3 J 4 600 – 1500 $172 $516 $138 $138 $28 $241 $120 –
3 K 4 150 – 300L $172 $516 $138 $138 $28 $241 $120 –
3 K 4 300 – 600 $172 $516 $138 $138 $28 $241 $120 –
3 K 6 900 – 1500 $172 $516 $138 $138 $28 $241 $120 –
3 L 4 150 – 300L $172 $516 $138 $138 $28 $241 $120 –
4 L 6 300 $172 $516 $138 $138 $28 $241 $120 –
4 L 6 600 – 1500 $172 $516 $138 $138 $28 $241 $120 –
4 M 6 150 – 300L $172 $516 $138 $138 $28 $241 $120 –
4 M 6 300 – 900 $172 $516 $138 $138 $28 $241 $120 –
4 N 6 150 – 300L $172 $516 $138 $138 $28 $241 $120 –
4 N 6 300 – 900 $172 $516 $138 $138 $28 $241 $120 –
4 P 6 150 – 300L $172 $516 $138 $138 $28 $241 $120 –
4 P 6 300 – 900 $172 $516 $138 $138 $28 $241 $120 –
6 Q 8 150 – 300L $172 $516 $138 $138 $28 $241 $120 –
6 Q 8 300 – 600 $172 $516 $138 $138 $28 $241 $120 CL600: $2,065
6 R 8 150 $172 $516 $138 $138 $28 $241 $120 –
6 R 8 300L $172 $516 $138 $138 $28 $241 $120 –
6 R 10 300 $172 $516 $138 $138 $28 $241 $120 –
6 R 10 600 $172 $172 $138 $138 $28 $241 $120 $2,409
8 T 10 150 – 300L $172 $516 $138 $138 $28 $241 $120 –
8 T 10 300 $172 $516 $138 $138 $28 $241 $120 $2,409
Type 526 Options
All prices in $
74
Conventional construction
Medium contact parts Item Component
Standard Service
Type 5262
Corrosive Service
Type 5264Material test
certifi cate
DIN EN 10204-3.1Option code Material Option code Material
1 Body – SA 216 WCB – CF8M H01
5 Nozzle – CF8M – CF8M L59
7 DiscL44 316L
–316L
stellitedL23
J25316L
stellited
9 Bonnet – SA 216 WCB – SA 479 316L L30
54 Spring X08 Inconel X08 Inconel –
Sour gas service – NACE MR0175-2003 and MR0103-2012
The charts below show the parts that must be considered for NACE sour gas service depending on the valve construction. LESER recommends bellows construction for all NACE applications because Inconel springs are not carried in stock.
So
ur
ga
s
se
rvic
e –
NA
CE
APIAPI
75
Special materials
MONEL® MONEL® Hastelloy® Hastelloy® Duplex Duplex
Grade MA1) Grade MB2) Grade HA1) Grade HB2) Grade DA1) Grade DB2)
on request
1) Grade MA, HA, DA: Disc and nozzle2) Grade MB, HB, DB: Disc, nozzle and bellows
Bellows construction
Medium contact parts Item Component
Standard Service
Type 5262
Corrosive Service
Type 5264Material test
certifi cate
DIN EN 10204-3.1Option code Material Option code Material
1 Body – SA 216 WCB – CF8M H01
5 Nozzle – CF8M – CF8M L59
7 DiscL44 316L
–316L
stellitedL23
J25316L
stellited
15 Bellows J83Inconel 625 /
316LJ83
Inconel 625 / 316L
–
Sour gas service – NACE MR0175-2003 and MR0103-2012
The charts below show the parts that must be considered for NACE sour gas service depending on the valve construction. LESER recommends bellows construction for all NACE applications because Inconel springs are not carried in stock.
So
ur
ga
s
se
rvic
e –
NA
CE
APIAPI
76
Outlet class 300
API valves with class 150 and class 300L inlet are not considered for class 300 outlet design. For CL900, CL2500 (Orifi ce D – G) and CL1500 (Orifi ce D – K) inlet please see standard valves with outlet fl ange class 300 acc. to API standard 526.
All prices in $
Typ
e 5
26
Ou
tle
t c
las
s 3
00
APIAPI
Valve
size
Center to face Material 300 x 300 600 x 300 900 x 300 1500 x 300
Inlet a Outlet b WCB LCB WC6 CF8MOption code Option code Option code Option code
[inch] [inch] 5262. 5263. 5267. 5264.
1 D 2 1) 41/8 41/2
002x 501x 006x 011x H65, H80, S01 – – –
$344
003x 502x 007x 012x – H67, H80, S01 – –
$344
11/2 D 2 41/8 51/2 004x 503x 008x 013x H65, H80 H67, H80 * * * * $344 $344 – – – –
1 E 2 1) 41/8 41/2
016x 506x 020x 025x H65, H80, S01 – – –
$344
017x 507x 021x 026x – H67, H80, S01 – –
$344
11/2 E 2 41/8 5 1/2 018x 508x 022x 027x H65, H80 H67, H80 * * * * $344 $344 – – – –
11/2 F 2 47/8 6
031x 512x 035x 041x H65, H80 – * * * * $344 – – – –
032x 513x 036x 042x – H67, H80 * * * * $344 – – – –
11/2 G 3 47/8 61/2 049x 520x 054x 114x H65, H80 H67, H80 * * * * $344 $344 – – – –
2 H 3 61/16 63/8
146x 527x 150x 156x H65, H80 H67, H80 see below
$344 $344 CL1500 x 300
147x 528x 151x 157x –see
CL1500 x 300 * *– – –
3 J 4 71/4 71/8 166x 533x 170x 200x H65, H80 H67, H80 H68, H80 * * $551 $551 $551 – –
3 K 4 71/4 71/8 204x 537x 208x 213x H65, H80 H67, H80 H68, H80 * * $551 $551 $551 – –
4 L 6 73/4 81/2
235x 543x – – H65, H80 H67, H80
5262.236x InletCL900 WCB
5263.544x Inlet CL900 LCB
S01 Outlet fl ange welded
5262.237x Inlet CL900 WCB
5263.545x Inlet CL900 LCB
S01 Outlet fl ange welded
$551 $551 $1,032 $1,032
– – 239x – H65, H80 H67, H80
5267.240x Inlet CL900
S01 Outlet fl ange welded
5267.241x Inlet CL900
S01 Outlet fl ange welded
$551 $551 $9,291 $9,291
– – – 245x H65, H80 H67, H80
5264.246x Inlet CL900
S01 Outlet fl ange welded
$551 $551 $1,204
Flange drillings Type 526 acc. to ASME B16.5 – outlet fl ange rating class 300
* Outlet fl ange rating class 300 is standard fl ange rating class according to API Standard 526. 1) Delivery time 24 weeksx Please add code for cap or lifting device.
77
Outlet class 300 All prices in $
Typ
e 5
26
Ou
tle
t c
las
s 3
00
APIAPI
Valve
size
Center to face Material 300 x 300 600 x 300 900 x 300 1500 x 300
Inlet a Outlet b WCB LCB WC6 CF8MOption code Option code Option code Option code
[inch] [inch] 5262. 5263. 5267. 5264.
4 M 6 73/4 81/2
582x 548x – – H65, H80 H67, H80S01
Outlet fl angewelded
$551 $551 $1,032
– – 585x – H65, H80 H67, H80S01
Outlet fl angewelded
$551 $551 $9,291
– – – 589x H65, H80 H67, H80
$551 $551
4 N 6 73/4 81/2
592x 552x – – H65, H80 H67, H80
5262.593x Inlet CL900 WCB
5263.553x Inlet CL900 LCB
S01 Outlet fl ange welded
$551 $551 $1,032
– – 595x – H65, H80 H67, H80
5267.596x Inlet CL900 WC6
S01 Outlet fl ange welded
$551 $551 $9,291
– – – 599x H65, H80 H67, H80
$551 $551
4 P 6
Outlet fl angewelded
87/8 115/8
647x 556x – – S01 S01 S01
$1,032 $1,032 $1,032
– – 650x – S01 S01 S01
$9,635 $9,635 $9,635
– – – 655x S01 S01
$1,204 $1,204
6 Q 8
Outlet fl angewelded
97/16 12
658x 560x – – S01 S01
$1,204 $1,204
– – 660x – S01 S01
on request on request
– – – 663x S01 S01
$1,376 $1,376
6 R 10
Outlet fl angewelded
97/16 131/5
667x 564x – – S01 S01
$1,376 $1,376
– – 670x – S01 S01
on request on request
– – – 673x S01 S01
$1,548 $1,548
8 T 10
Outlet fl angewelded
107/8 131/5
676x 567x – – S01 S01
$1,376 $1,376
– – 677x – S01
on request
– – – 679x S01
$1,548
Flange drillings Type 526 acc. to ASME B16.5 – outlet fl ange rating class 300
* Outlet fl ange rating class 300 is standard fl ange rating class according to API Standard 526. x Please add code for cap or lifting device.
78
Type 526 – Flange facings
Typ
e 5
26
Fla
ng
es
Connection acc. to API Standard 526 – 1984
Orifi ceValve size Flange rating class
Option codeInlet Outlet Inlet
D / E 1 1/2" 3" drilled 2 1/2" CL2500 S01
F 1 1/2" 3" drilled 2 1/2" CL900 S01
G 1 1/2" 3" drilled 2 1/2" CL150 – 900 S01
J 2 1/2" 4" CL900 – 1500 S01
K 2 1/2" 6" CL900 – 1500 S01
1) LESER manufactures the groove at flanged valves by milling. If a customer demands a turned surface in the soil of the groove according to DIN EN 1092-1 an additional option code is necessary: “S01: bottom of the groove drilled”.
2) Smooth finish is not defined in the effective standards.
For signs and symbols refer to page 16.Note: Flange drillings and facings meet always the requirements of mentioned flange standards. Flange thickness and outer diameter may vary from flange standard.
Flange facings
Indication Standard Inlet Outlet Remark
General
Flange undrilled – H38 H39
Linde-V-Nut, Form V48 Linde Standard 420-08LDeS 3313.36
J07 J08 Groove: Rz 16
Linde-V-Nut, Form V48A J05 J06 Groove: Rz 4, e.g. with hydrogen
Lens seal form L(without sealing lens)
DIN 2696LDeS 3313.35
J11 J12
Acc. to DIN EN 1092
Inlet Outlet Remark
Flange facing
(see also LDeS 3313.40)PN 10 – PN 40
PN 63 – PN 400
PN 10 – PN 40
PN 63Rz-data according to
DIN EN 1092 in μm
Raised faceType B1 * – * – Facing: Rz = 12.5 – 50
Type B2 L36 * L38 * Facing: Rz = 3.2 – 12.5
Tongue face C1) S05 H92
Groove face D1) S05 H91
Male face E S05 H98
Female face F S05 H99
O-ring male face G S05 S01
O-ring female face H S05 S01
Acc. to ASME B16.5
Body
materialInlet Outlet
Smooth finish2) Serrated finish RTJ-groove
Inlet Outlet Inlet Outlet Inlet Outlet
Option code Option code CL300 CL600 CL900 CL1500 CL2500 CL150 CL300
all all all L52 L53 * * L58 H63
Stud-bolts length for flange connection inlet and outlet
All LESER safety valves Type 526 need at the inlet side longer stud-bolts for the flange connections as stated in ASME B16.5, due to the full nozzle design.Furthermore, due to the actual castings the stud bolts at the outlet can differ from ASME B16.5 as well.LESER state the stud-bolt length in LDeS 3001.29-E. For calculation of stud-bolts length the measure “s” stated in API Catalog can be used.
APIAPI
79
Type 526 – Weights
Typ
e 5
26
We
igh
ts
US Units
Bonnet all
Lifting device all
Flange class 150 x 150 300L x 150 300 x 150 600 x 150 900 x 300 1500 x 300 2500 x 300
Valve size 1 D 2 1 D 2 1 D 2 1 D 2 1 1/2 D 2 1 1/2 D 2 1 1/2 D 3
DWeight [lbs] 38.1 38.1 38.1 38.1 68.6 68.6 92.2
with bellows [lbs] 40.6 40.6 40.6 40.6 73.0 73.0 98.3
E1 E 2 1 E 2 1 E 2 1 E 2 1 1/2 E 2 1 1/2 E 2 1 1/2 E 3
Weight [lbs] 38.1 38.1 38.1 38.1 68.6 68.6 92.2
with bellows [lbs] 40.6 40.6 40.6 40.6 73.0 73.0 98.3
F1 1/2 F 2 1 1/2 F 2 1 1/2 F 2 1 1/2 F 2 1 1/2 F 3 1 1/2 F 3 1 1/2 F 3
Weight [lbs] 67.5 67.5 71.7 71.7 80.0 80.0 92.2
with bellows [lbs] 73.0 73.0 77.2 77.2 85.1 85.1 98.3
G1 1/2 G 3 1 1/2 G 3 1 1/2 G 3 1 1/2 G 3 1 1/2 G 3 2 G 3 2 G 3
Weight [lbs] 67.5 67.5 71.7 71.7 80.0 154.1 154.1
with bellows [lbs] 73.0 73.0 77.2 77.2 85.0 159.9 159.9
Flange class 150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 300
Valve size 1 1/2 H 3 1 1/2 H 3 2 H 3 2 H 3 2 H 3 2 H 3
HWeight [lbs] 67.5 67.5 98.3 137.2 137.2 137.2
with bellows [lbs] 73.0 73.0 106.7 144.0 144.0 144.0
J2 J 3 2 J 3 3 J 4 3 J 4 3 J 4 3 J 4
Weight [lbs] 98.3 98.3 171.3 171.3 220.9 220.9
with bellows [lbs] 106.7 106.7 183.5 183.5 233.1 233.1
K
3 K 4 3 K 4 3 K 4 3 K 4 3 K 6 3 K 6Other WC6
Weight [lbs] 154.6 154.6 154.6 171.3 154.6 281.1 281.1
with bellows [lbs] 166.9 166.9 166.9 183.5 166.9 295.7 295.7
Flange class 150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150
Valve size 3 L 4 3 L 4 4 L 6 4 L 6 4 L 6 4 L 6
LWeight [lbs] 154.6 154.6 247.4 269.0 295.7 281.1
with bellows [lbs] 166.9 166.9 262.0 283.6 310.2 295.7
M4 M 6 4 M 6 4 M 6 4 M 6 4 M 6
Weight [lbs] 247.2 247.2 247.2 269.0 295.7
with bellows [lbs] 261.7 261.7 261.7 283.6 310.2
N4 N 6 4 N 6 4 N 6 4 N 6 4 N 6
Weight [lbs] 283.6 283.6 283.6 295.7 295.7
with bellows [lbs] 298.1 298.1 298.1 310.2 310.2
P4 P 6 4 P 6 4 P 6 4 P 6 4 P 6
Weight [lbs] 237.5 237.5 361.6 361.6 361.6
with bellows [lbs] 253.1 253.1 379.2 379.2 379.2
Q6 Q 8 6 Q 8 6 Q 8 6 Q 8
Weight [lbs] 487.3 487.3 487.3 487.3
with bellows [lbs] 507.2 507.2 507.2 507.2
R6 R 8 6 R 8 6 R 10 6 R 10
Weight [lbs] 487.3 487.3 610.8 610.8
with bellows [lbs] 507.2 507.2 635.0 635.0
T8 T 10 8 T 10 8 T 10
Weight [lbs] 632.8 632.8 632.8
with bellows [lbs] 657.1 657.1 657.1
APIAPI
80
1) 300L x 150 is available with the same Article-No. Note: Flange drillings and facings meet always the requirements of mentioned fl ange standards. Flange thickness and outer diameter may be thicker and wider than fl ange standard. For correct selection of bolting please refer to LDeS 3007-01. The inlet pressure size CL150 is not considered, please switch to inlet pressure size CL300 or CL300L.
Type 526 – Flange drillings according to DIN EN 1092-1
Standard API 526 Article-No. Flange drillings
Valve
size
Flange
class
Material Inlet Inlet Outlet Outlet
WCB LCB WC6 CF8M NPS PN PN PN PN PN PN PN PN PN NPS PN PN PN PN PN
5262. 5263. 5267. 5264. [DN] 10/16 25 40 63 100 160 250 320 400 [DN] 10 16 25 40 63
1 D 2 300 x 1501) 002* 501* 006* 011* 25 H47 H47 H47 – – – – – – 50 H15 H15 H15 H15 –
1 D 2 600 x 150 003* 502* 007* 012* 25 – – – H17 H17 – – – – 50 H15 H15 H15 H15 –
11/2 D 2 1500 x 300 004* 503* 008* 013* 40 – – – – – H11 H12 – – 50 H15 H15 H15 H15 –
11/2 D 3 2500 x 300 005* 504* 009* 014* 40 – – – – – – H12 H13 – 80 H15 H15 H15 H15 H16
1 E 2 300 x 1501) 016* 506* 020* 025* 25 H47 H47 H47 – – – – – – 50 H15 H15 H15 H15 –
1 E 2 600 x 150 017* 507* 021* 026* 25 – – – H17 H17 – – – – 50 H15 H15 H15 H15 –
11/2 E 2 1500 x 300 018* 508* 022* 027* 40 – – – – – H11 H12 – – 50 H15 H15 H15 H15 –
11/2 E 3 2500 x 300 019* 509* 023* 028* 40 – – – – – – H12 H13 – 80 H15 H15 H15 H15 H16
11/2 F 2 300L x 150 030* 511* – 040* 40 H47 – – – – – – – – 50 H15 H15 H15 H15 –
11/2 F 2 300 x 150 031* 512* 035* 041* 40 – H47 H47 – – – – – – 50 H15 H15 H15 H15 –
11/2 F 2 600 x 150 032* 513* 036* 042* 40 – H47 H47 – – – – – – 50 H15 H15 H15 H15 –
11/2 F 3 1500 x 300 033* 514* 037* 043* 40 – – – H11 H11 H11 H12 – – 80 H15 H15 H15 H15 H16
11/2 F 3 2500 x 300 034* 515* 038* 044* 40 – – – – – – H12 H13 – 80 H15 H15 H15 H15 H16
11/2 G 3 300L x 150 046* 517* – 111* 40 H47 – – – – – – – – 50 H15 H15 H15 H15 –
11/2 G 3 300 x 150 047* 518* 052* 112* 40 – H47 H47 H11 – – – – – 50 H15 H15 H15 H15 –
11/2 G 3 600 x 150 048* 519* 053* 113* 40 – – – H11 H11 H11 – – – 50 H15 H15 H15 H15 –
11/2 G 3 900 x 300 049* 520* 054* 114* 40 – – – – H11 H11 – – – 80 H15 H15 H15 H15 H16
2 G 3 1500 x 300 050* 521* 055* 115* 40 – – – – – – H12 H13 – 80 H15 H15 H15 H15 H16
2 G 3 2500 x 300 051* 522* 056* 116* 40 – – – – – – – – H14 80 H15 H15 H15 H15 H16
11/2 H 3 300L x 150 143* 524* – 153* 40 H47 H47 H47 – – – – – – 50 H15 H15 H15 H15 –
2 H 3 300 x 150 144* 525* 148* 154* 50 – – H47 H10 – – – – – 50 H15 H15 H15 H15 –
2 H 3 600 x 150 – – 149* – 50 – – H47 H10 – – – – – 50 H15 H15 H15 H15
2 H 3 600 x 150 145* 526* – 155* 50 – – H47 H10 – – – – – 80 H15 H15 H15 H15 H16
2 H 3 900 x 150 146* 527* 150* 156* 50 – – – – H11 H11 – – – 80 H15 H15 H15 H15 H16
2 H 3 1500 x 300 147* 528* 151* 157* 50 – – – – – H11 H12 – – 80 H15 H15 H15 H15 H16
2 J 3 300L x 150 163* 530* – 197* 50 H47 H47 H47 H10 – – – – – 80 H15 H15 H15 H15 –
3 J 4 600 x 150 165* 532* 169* 199 * 80 – – H47 H10 – – – – – 100 H51 H51 H51 H51 –
3 J 4 900 x 150 166* 533* 170* 200* 80 – – – – H11 H11 – – – 100 H51 H51 H15 H15 H16
3 J 4 1500 x 300 167* 534* 171* 201* 80 – – – – – H11 H12 – – 100 H51 H51 H15 H15 H16
Type 526 – Flange drillings
Typ
e 5
26
Fla
ng
e d
rillin
gs
APIAPI
81
1) 300L x 150 is available with the same Article-No. Note: Flange drillings and facings meet always the requirements of mentioned fl ange standards. Flange thickness and outer diameter may be thicker and wider than fl ange standard. For correct selection of bolting please refer to LDeS 3007-01. The inlet pressure size CL150 is not considered, please switch to inlet pressure size CL300 or CL300L.
Type 526 – Flange drillings according to DIN EN 1092-1
Standard API 526 Article-No. Flange drillings
Valve
size
Flange
class
Material Inlet Inlet Outlet Outlet
WCB LCB WC6 CF8M NPS PN PN PN PN PN PN PN PN PN NPS PN PN PN PN PN
5262. 5263. 5267. 5264. [DN] 10/16 25 40 63 100 160 250 320 400 [DN] 10 16 25 40 63
3 K 4 300 x 1501) 203* 536* 207* 212* 80 H47 H47 H47 H10 – – – – – 100 H51 H51 H15 H15 –
3 K 4 600 x 150 204* 537* 208* 213* 80 – – H47 H10 – – – – – 100 H51 H51 H15 H15 –
3 K 6 900 x 150 – – 209* – 80 – – – H10 H11 H11 H12 – – 150 H51 H51 – – –
3 K 6 900 x 150 205* 538* – 214* 80 – – – H10 H11 H11 H12 – – 150 H51 H51 H15 H15 –
3 K 6 1500 x 300 206* 539* 210* 215* 80 – – – H10 H11 H11 H12 – – 150 H51 H51 H15 H15 –
3 L 4 300L x 150 233* 541* – 243* 80 H47 H47 H47 H10 – – – – – 100 H15 H15 H15 H15 –
4 L 6 300 x 150 234* 542* 238* 244* 100 H45 H47 H47 H10 – – – – – 150 H51 H51 – – –
4 L 6 600 x 150 235* 543* 239* 245* 100 – – – H10 H11 H11 – – – 150 H51 H51 – – –
4 L 6 900 x 150 236* 544* 240* 246* 100 – – – – H11 H11 – – – 150 H51 H51 – – –
4 L 6 1500 x 300 237* 545* 241* – 100 – – – – – – H12 – – 150 H51 H51 – – –
4 M 6 300 x 1501) 581* 547* 584* 588* 100 H45 H47 H47 H10 – – – – – 150 H51 H51 – – –
4 M 6 600 x 150 582* 548* 585* 589* 100 – – – H10 H11 H11 – – – 150 H51 H51 – – –
4 M 6 900 x 150 583* 549* 586* – 100 – – – – H11 H11 H12 – – 150 H51 H51 – – –
4 N 6 300L x 1501) 591* 551* 594* 598* 100 H45 H47 H47 H10 – – – – – 150 H51 H51 – – –
4 N 6 600 x 150 592* 552* 595* 599* 100 – – – – H11 H11 – – – 150 H51 H51 – – –
4 N 6 900 x 150 593* 553* 596* – 100 – – – – – – H12 – – 150 H51 H51 – – –
4 P 6 300L x 150 646* 555* – 654* 100 H45 H47 H47 – – – – – – 150 H51 H51 – – –
4 P 6 300 x 150 647* 556* 550* 655* 100 – H47 H47 – – – – – – 150 H51 H51 – – –
4 P 6 600 x 300 648* 557* 551* 656* 100 – – – H10 H11 – – – – 150 H51 H51 – – –
4 P 6 900 x 300 649* 558* 552* – 100 – – – – – H11 H12 – – 150 H51 H51 – – –
6 Q 8 300 x 150 658* 560* 660* 663* 150 H45 H47 H47 – – – – – – 200 H50 H51 H52 – –
6 Q 8 600 x 150 659* 561* 661* 664* 150 – – – H10 H11 H11 – – – 200 H50 H51 H52 – –
6 R 8 300L x 150 666* 563* 669* 672* 150 H45 H47 H47 H10 – – – – – 200 H50 H51 H52 – –
6 R 10 300 x 150 667* 564* – 673* 150 – – H47 H10 – – – – – 250 H50 H51 – – –
6 R 10 600 x 150 668* 565* 670* 674* 150 – – H47 H10 – – – – – 250 H50 H51 – – –
8 T 10 300 x 1501) 676* 567* 677* 679* 200 – H46 H47 – – – – – – 250 H50 H51 – – –
Type 526 – Flange drillings
Typ
e 5
26
Fla
ng
e d
rillin
gs
APIAPI
82
Typ
e 5
26
Sp
are
Pa
rts K
its
LESER Original Spare Parts Kits
The LESER Spare Parts Kits contain all the parts recommended for the regular maintenance of a LESER safety valve
All prices in $
Orifi ceSafety valve fl ange class inlet
CL150 CL300L CL300 CL600 CL900 CL1500 CL2500
D / E5012.1101 5012.1102
$62 $62
F5012.1103
$62
G5012.1104 5012.1121
$62 $62
H5012.1105 5012.1106
$86 $86
J5012.1107 5012.1108
$103 $103
K5012.1109 5012.1110
$103 $173
L5012.1111 5012.1112
$103 $173
M5012.1113
$173
N5012.1114
$173
P5012.1115 5012.1116
$207 $310
Q5012.1117
$344 Presentationbox for API spare parts kits
R5012.1118 5012.1119
$344 $516 595.1705.0000
T5012.1120 $516
$516
Spare Parts Kits
APIAPI
1) Kit 5012.1118 and 5012.1119: Kits don’t contain securing ring due to re-usable ring bush in the safety valve.2) Kit 5012.1109: Three additional gaskets are enclosed for use in type 5267 (WC6).
Item Component Material Quantity
7.5 Securing ring (Disc) 1.4571 / 316Ti 1
14 Split ring 1.4404 / 316L 2
57 Ball 1.4401 / 316 15
59 Securing ring1) 1.4571 / 316Ti 1
60 Gasket2) Graphite / 1.4401 – Graphite / 316 3
61 Ball 1.4401 / 316 1
66 Screw 1.4401 / 316 1
73.2 Gasket (Lock screw) 1.4401 / 316 1
Contents
The LESER Spare Parts Kits contain all the parts recommended for the regular maintenance of a LESER safety valve
83
Type 526 Spare parts – Orifice D
Item PartBody
material
Flange class
150 300L 300 600 900 / 1500 2500
Material-No. / Art. No.
5 Nozzle
WCB, LCB 207.2049.9000 207.2049.9000 207.2049.9000 207.2069.9000 207.2269.9000 207.2769.9000
CF8M CF8M CF8M CF8M stellited CF8M stellited CF8M stellited
$723 $723 $723 $946 $1,204 $1,204
WC6 – – 207.2069.9000 207.2069.9000 207.2269.9000 207.2769.9000
CF8M stellited CF8M stellited CF8M stellited CF8M stellited
$946 $946 $1,204 $1,204
CF8M 207.2049.9000 207.2049.9000 207.2049.9000 207.2049.9000 207.2269.9000 207.2769.9000
CF8M CF8M CF8M CF8M CF8M stellited CF8M stellited
$723 $723 $723 $723 $1,204 $1,204
7 Disc
Hardened stainless steel
WCB, LCB, WC6
225.0439.9000 225.0439.9000 225.0439.9000 225.0439.9000 225.0539.9000 225.0639.9000
$275 $275 $275 $275 $275 $275
316L stellited CF8M225.0469.9000 225.0469.9000 225.0469.9000 225.0469.9000 225.0569.9000 225.0669.9000
$551 $551 $551 $551 $551 $551
7
O-ring disc1)
all
205.0149.90X1 205.0149.90X1 205.0149.90X1 205.0149.90X1 205.0249.90X1 205.0249.90X1
CR Neoprene® “K” X: 5 $310 $310 $310 $310 $310 $310
EPDM Buna-EP® “D” X: 4 $310 $310 $310 $310 $310 $310
FKM Viton® “L” X: 7 $310 $310 $310 $310 $310 $310
FFKM Kalrez® “C” X: 9 $516 $516 $516 $516 $516 $516
7.4
O-ring1)
all
502.0171.26X1 502.0171.26X1 502.0171.26X1 502.0171.26X1 502.0171.26X1 502.0171.26X1
CR Neoprene® “K” X: 5 $21 $21 $21 $21 $21 $21
EPDM Buna-EP® “D” X: 4 $21 $21 $21 $21 $21 $21
FKM Viton® “L” X: 7 $28 $28 $28 $28 $28 $28
FFKM Kalrez® “C” X: 9 $241 $241 $241 $241 $241 $241
12
SpindleConventional design
WCB, LCB, WC6
242.7339.0000 242.7339.0000 242.7339.0000 242.7339.0000 242.7439.0000 242.7639.0000
$172 $172 $172 $172 $172 $172
CF8M242.7349.0000 242.7349.0000 242.7349.0000 242.7349.0000 242.7449.0000 242.7649.0000
$275 $275 $275 $275 $275 $275
SpindleBalanced bellows design
WCB, LCB, WC6
244.8639.0000 244.8639.0000 244.8639.0000 244.8639.0000 244.8739.0000 244.8739.0000
$172 $172 $172 $172 $172 $172
CF8M244.8649.0000 244.8649.0000 244.8649.0000 244.8649.0000 244.8749.0000 244.8749.0000
$275 $275 $275 $275 $275 $275
14 Split rings all251.0249.0000 251.0249.0001 251.0249.0002 251.0249.0003 251.0249.0004 251.0249.0005
$7 $7 $7 $7 $7 $7
15BellowsInconel
all400.8379.0421 400.8379.0421 400.8379.0421 400.8379.0400 400.8379.0400 400.8379.0400
$482 $482 $482 $619 $619 $619
57Ballsø [mm], Quantity
all
510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000
3, 12 pieces 3, 12 pieces 3, 12 pieces 3, 12 pieces 3, 12 pieces 3, 12 pieces
$14 $14 $14 $14 $14 $14
60 Gaskets all500.0807.0000 500.0807.0000 500.0807.0000 500.0807.0000 500.1207.0000 500.1207.0000
$14 $14 $14 $14 $14 $14
61Ballsø [mm]
all
510.0204.0000 510.0204.0000 510.0204.0000 510.0204.0000 510.0204.0000 510.0204.0000
9 9 9 9 9 9
$14 $14 $14 $14 $14 $14
69 Axial needle bearing all250.0749.0000 250.0749.0000 250.0749.0000 250.0749.0000 250.0749.0000 250.0749.0000
$55 $55 $55 $55 $55 $55
Bellows
conversion kitall
5021.1340 5021.1340 5021.1340 5021.1341 5021.1342 5021.1343
$482 $482 $482 $482 $946 $946
Orifi ce D
All prices in $
Item Component Quantity Item Component Quantity
8 Guide 1 55 Stud 4
11 Bonnet spacer 1 60 Gasket 2, 3 depends on fl ange class
12 Spindle 1 Installation instruction 1
15 Bellows 1
A bellows conversion kit contains the following parts:
Typ
e 5
26
Sp
are
pa
rts
APIAPI
1) Material FFKM “C” is only available as special design (without material number)
84
Type 526 Spare parts – Orifice E
Item PartBody
material
Flange class
150 300L 300 600 900 / 1500 2500
Material-No. / Art. No.
5 Nozzle
WCB, LCB 207.2049.9000 207.2049.9000 207.2049.9000 207.2069.9000 207.2269.9000 207.2769.9000
CF8M CF8M CF8M CF8M stellited CF8M stellited CF8M stellited
$723 $723 $723 $946 $1,204 $1,204
WC6 – – 207.2069.9000 207.2069.9000 207.2269.9000 207.2769.9000
CF8M stellited CF8M stellited CF8M stellited CF8M stellited
$946 $946 $1,204 $1,204
CF8M 207.2049.9000 207.2049.9000 207.2049.9000 207.2049.9000 207.2269.9000 207.2769.9000
CF8M CF8M CF8M CF8M CF8M stellited CF8M stellited
$723 $723 $723 $723 $1,204 $1,204
7 Disc
Hardened stainless steel
WCB, LCB, WC6
225.0439.9000 225.0439.9000 225.0439.9000 225.0439.9000 225.0539.9000 225.0639.9000
$275 $275 $275 $275 $275 $275
316L stellited CF8M225.0469.9000 225.0469.9000 225.0469.9000 225.0469.9000 225.0569.9000 225.0669.9000
$551 $551 $551 $551 $551 $551
7
O-ring disc1)
all
205.0149.90X1 205.0149.90X1 205.0149.90X1 205.0149.90X1 205.0249.90X1 205.0249.90X1
CR Neoprene® “K” X: 5 $310 $310 $310 $310 $310 $310
EPDM Buna-EP® “D” X: 4 $310 $310 $310 $310 $310 $310
FKM Viton® “L” X: 7 $310 $310 $310 $310 $310 $310
FFKM Kalrez® “C” X: 9 $516 $516 $516 $516 $516 $516
7.4
O-ring1)
all
502.0171.26X1 502.0171.26X1 502.0171.26X1 502.0171.26X1 502.0171.26X1 502.0171.26X1
CR Neoprene® “K” X: 5 $21 $21 $21 $21 $21 $21
EPDM Buna-EP® “D” X: 4 $21 $21 $21 $21 $21 $21
FKM Viton® “L” X: 7 $28 $28 $28 $28 $28 $28
FFKM Kalrez® “C” X: 9 $241 $241 $241 $241 $241 $241
12
SpindleConventional design
WCB, LCB, WC6
242.7339.0000 242.7339.0000 242.7339.0000 242.7339.0000 242.7439.0000 242.7639.0000
$172 $172 $172 $172 $172 $172
CF8M242.7349.0000 242.7349.0000 242.7349.0000 242.7349.0000 242.7449.0000 242.7649.0000
$275 $275 $275 $275 $275 $275
SpindleBalanced bellows design
WCB, LCB, WC6
244.8639.0000 244.8639.0000 244.8639.0000 244.8639.0000 244.8739.0000 244.8739.0000
$172 $172 $172 $172 $172 $172
CF8M244.8649.0000 244.8649.0000 244.8649.0000 244.8649.0000 244.8749.0000 244.8749.0000
$275 $275 $275 $275 $275 $275
14 Split rings all251.0249.0000 251.0249.0000 251.0249.0000 251.0249.0000 251.0249.0000 251.0249.0000
$7 $7 $7 $7 $7 $7
15BellowsInconel
all400.8379.0421 400.8379.0421 400.8379.0421 400.8379.0400 400.8379.0400 400.8379.0400
$482 $482 $482 $619 $619 $619
57Ballsø [mm], Quantity
all
510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000
3, 12 pieces 3, 12 pieces 3, 12 pieces 3, 12 pieces 3, 12 pieces 3, 12 pieces
$14 $14 $14 $14 $14 $14
60 Gaskets all500.0807.0000 500.0807.0000 500.0807.0000 500.0807.0000 500.1207.0000 500.1207.0000
$14 $14 $14 $14 $14 $14
61Ballsø [mm]
all
510.0204.0000 510.0204.0000 510.0204.0000 510.0204.0000 510.0204.0000 510.0204.0000
9 9 9 9 9 9
$14 $14 $14 $14 $14 $14
69 Axial needle bearing all250.0749.0000 250.0749.0000 250.0749.0000 250.0749.0000 250.0749.0000 250.0749.0000
$55 $55 $55 $55 $55 $55
Bellows
conversion kitall
5021.1340 5021.1340 5021.1340 5021.1341 5021.1342 5021.1343
$482 $482 $482 $482 $946 $946
Orifi ce E
All prices in $
Typ
e 5
26
Sp
are
pa
rts
A bellows conversion kit contains the following parts:
Item Component Quantity Item Component Quantity
8 Guide 1 55 Stud 4
11 Bonnet spacer 1 60 Gasket 2, 3 depends on fl ange class
12 Spindle 1 Installation instruction 1
15 Bellows 1
APIAPI
1) Material FFKM “C” is only available as special design (without material number)
85
Item PartBody
material
Flange class
150 300L 300 600 900 / 1500 2500
Material-No. / Art. No.
5 Nozzle
WCB, LCB 207.2349.9000 207.2349.9000 207.2349.9000 207.2369.9000 207.2369.9000 207.2869.9000
CF8M CF8M CF8M CF8M stellited CF8M stellited CF8M stellited
$946 $946 $946 $1,204 $1,204 $1,204
WC6 – – 207.2369.9000 207.2369.9000 207.2369.9000 207.2869.9000
CF8M stellited CF8M stellited CF8M stellited CF8M stellited
$1,204 $1,204 $1,204 $1,204
CF8M 207.2349.9000 207.2349.9000 207.2349.9000 207.2369.9000 207.2369.9000 207.2869.9000
CF8M CF8M CF8M CF8M stellited CF8M stellited CF8M stellited
$946 $946 $946 $1,204 $1,204 $1,204
7 Disc
Hardened stainless steel
WCB, LCB, WC6
225.0739.9000 225.0739.9000 225.0739.9000 225.0739.9000 225.0739.9000 225.0839.9000
$379 $379 $379 $379 $379 $379
316L stellited CF8M225.0769.9000 225.0769.9000 225.0769.9000 225.0769.9000 225.0769.9000 225.0869.9000
$654 $654 $654 $654 $654 $654
7
O-ring disc1)
all
205.0349.90X1 205.0349.90X1 205.0349.90X1 205.0349.90X1 205.0349.90X1 205.0349.90X1
CR Neoprene® “K” X: 5 $413 $413 $413 $413 $413 $413
EPDM Buna-EP® “D” X: 4 $413 $413 $413 $413 $413 $413
FKM Viton® “L” X: 7 $413 $413 $413 $413 $413 $413
FFKM Kalrez® “C” X: 9 $619 $619 $619 $619 $619 $619
7.4
O-ring1)
all
502.0202.26X1 502.0202.26X1 502.0202.26X1 502.0202.26X1 502.0202.26X1 502.0202.26X1
CR Neoprene® “K” X: 5 $21 $21 $21 $21 $21 $21
EPDM Buna-EP® “D” X: 4 $21 $21 $21 $21 $21 $21
FKM Viton® “L” X: 7 $28 $28 $28 $28 $28 $28
FFKM Kalrez® “C” X: 9 $241 $241 $241 $241 $241 $241
12
SpindleConventional design
WCB, LCB, WC6
242.7539.0000 242.7539.0000 242.7539.0000 242.7539.0000 242.7739.0000 242.7739.0000
$172 $172 $172 $172 $172 $172
CF8M242.7549.0000 242.7549.0000 242.7549.0000 242.7549.0000 242.7749.0000 242.7749.0000
$275 $275 $275 $275 $275 $275
SpindleBalanced bellows design
WCB, LCB, WC6
244.8839.0000 244.8839.0000 244.8839.0000 244.8839.0000 244.8839.0000 244.8839.0000
$172 $172 $172 $172 $172 $172
CF8M244.8849.0000 244.8849.0000 244.8849.0000 244.8849.0000 244.8849.0000 244.8849.0000
$275 $275 $275 $275 $275 $275
14 Split rings all251.0249.0000 251.0249.0000 251.0249.0000 251.0249.0000 251.0249.0000 251.0249.0000
$7 $7 $7 $7 $7 $7
15BellowsInconel
all400.8479.0421 400.8479.0421 400.8479.0421 400.8479.0400 400.8479.0400 400.8479.0400
$619 $619 $619 $619 $619 $619
57Ballsø [mm], Quantity
all
510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000
3, 12 pieces 3, 12 pieces 3, 12 pieces 3, 12 pieces 3, 12 pieces 3, 12 pieces
$14 $14 $14 $14 $14 $14
60 Gaskets all500.1207.0000 500.1207.0000 500.1207.0000 500.1207.0000 500.1207.0000 500.1207.0000
$14 $14 $14 $14 $14 $14
61Ballsø [mm]
all
510.0204.0000 510.0204.0000 510.0204.0000 510.0204.0000 510.0204.0000 510.0204.0000
9 9 9 9 9 9
$14 $14 $14 $14 $14 $14
69 Axial needle bearing all250.0749.0000 250.0749.0000 250.0749.0000 250.0749.0000 250.0749.0000 250.0749.0000
$55 $55 $55 $55 $55 $55
Bellows
conversion kitall
5021.1344 5021.1344 5021.1344 5021.1345 5021.1346 5021.1346
$946 $946 $946 $946 $946 $946
Orifi ce F
Type 526 Spare parts – Orifice F All prices in $
Typ
e 5
26
Sp
are
pa
rts
A bellows conversion kit contains the following parts:
Item Component Quantity Item Component Quantity
8 Guide 1 55 Stud 4
11 Bonnet spacer 1 60 Gasket 3
12 Spindle 1 Installation instruction 1
15 Bellows 1
APIAPI
1) Material FFKM “C” is only available as special design (without material number)
86
Item PartBody
material
Flange class
150 300L 300 600 900 1500 2500
Material-No. / Art. No.
5 Nozzle
WCB, LCB 207.2449.9000 207.2449.9000 207.2449.9000 207.2469.9000 207.2469.9000 207.3269.9000 207.3269.9000
CF8M CF8M CF8M CF8M stellited CF8M stellited CF8M stellited CF8M stellited
$946 $946 $946 $1,204 $1,204 $1,376 $1,376
WC6 – – 207.2469.9000 207.2469.9000 207.2469.9000 207.3269.9000 207.3269.9000
CF8M stellited CF8M stellited CF8M stellited CF8M stellited CF8M stellited
$1,204 $1,204 $1,204 $1,376 $1,376
CF8M 207.2449.9000 207.2449.9000 207.2449.9000 207.2449.9000 207.2469.9000 207.3269.9000 207.3269.9000
CF8M CF8M CF8M CF8M CF8M stellited CF8M stellited CF8M stellited
$946 $946 $946 $946 $1,204 $1,376 $1,376
7 Disc
Hardened stainless steel
WCB, LCB, WC6
225.1139.9000 225.1139.9000 225.1139.9000 225.1139.9000 225.1139.9000 225.1439.9000 225.1439.9000
$379 $379 $379 $379 $379 $379 $379
316L stellited CF8M225.1169.9000 225.1169.9000 225.1169.9000 225.1169.9000 225.1169.9000 225.1469.9000 225.1469.9000
$654 $654 $654 $654 $654 $654 $654
7
O-ring disc1)
all
205.0649.90X1 205.0649.90X1 205.0649.90X1 205.0649.90X1 205.0649.90X1 205.0649.90X1 205.0649.90X1
CR Neoprene® “K” X: 5 $413 $413 $413 $413 $413 $413 $413
EPDM Buna-EP® “D” X: 4 $413 $413 $413 $413 $413 $413 $413
FKM Viton® “L” X: 7 $413 $413 $413 $413 $413 $413 $413
FFKM Kalrez® “C” X: 9 $619 $619 $619 $619 $619 $619 $619
7.4
O-ring1)
all
502.0249.35X1 502.0249.35X1 502.0249.35X1 502.0249.35X1 502.0249.35X1 502.0249.35X1 502.0249.35X1
CR Neoprene® “K” X: 5 $21 $21 $21 $21 $21 $21 $21
EPDM Buna-EP® “D” X: 4 $21 $21 $21 $21 $21 $21 $21
FKM Viton® “L” X: 7 $28 $28 $28 $28 $28 $28 $28
FFKM Kalrez® “C” X: 9 $241 $241 $241 $241 $241 $241 $241
12
SpindleConventional design
WCB, LCB, WC6
242.7539.0000 242.7539.0000 242.7539.0000 242.7539.0000 242.7739.0000 242.8039.0000 242.8039.0000
$172 $172 $172 $172 $172 $275 $275
CF8M242.7549.0000 242.7549.0000 242.7549.0000 242.7549.0000 242.7749.0000 242.8049.0000 242.8049.0000
$275 $275 $275 $275 $275 $379 $379
SpindleBalanced bellows design
WCB, LCB, WC6
244.8939.0000 244.8939.0000 244.8939.0000 244.8939.0000 244.8939.0000 244.9039.0000 244.9039.0000
$172 $172 $172 $172 $172 $275 $275
CF8M244.8949.0000 244.8949.0000 244.8949.0000 244.8949.0000 244.8949.0000 244.9049.0000 244.9049.0000
$275 $275 $275 $275 $275 $379 $379
14 Split rings all251.0249.0000 251.0249.0000 251.0249.0000 251.0249.0000 251.0249.0000 251.0349.0000 251.0349.0000
$7 $7 $7 $7 $7 $14 $14
15BellowsInconel
all400.8579.0421 400.8579.0421 400.8579.0421 400.8579.0400 400.8579.0400 400.8579.0400 400.8579.0400
$619 $619 $619 $619 $619 $619 $619
57Ballsø [mm], Quantity
all
510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000
3, 12 pieces 3, 12 pieces 3, 12 pieces 3, 12 pieces 3, 12 pieces 3, 12 pieces 3, 12 pieces
$14 $14 $14 $14 $14 $14 $14
60 Gaskets all500.1207.0000 500.1207.0000 500.1207.0000 500.1207.0000 500.1207.0000 500.1607.0000 500.1607.0000
$14 $14 $14 $14 $14 $34 $34
61Ballsø [mm]
all
510.0204.0000 510.0204.0000 510.0204.0000 510.0204.0000 510.0204.0000 510.0204.0000 510.0204.0000
9 9 9 9 9 9 9
$14 $14 $14 $14 $14 $14 $14
69 Axial needle bearing all250.0749.0000 250.0749.0000 250.0749.0000 250.0749.0000 250.0749.0000 250.0849.0000 250.0849.0000
$55 $55 $55 $55 $55 $69 $69
Bellows
conversion kitall
5021.1350 5021.1350 5021.1350 5021.1351 5021.1352 5021.1353 5021.1353
$946 $946 $946 $946 $946 $1,290 $1,290
Orifi ce G
Type 526 Spare parts – Orifice G All prices in $
Typ
e 5
26
Sp
are
pa
rts
A bellows conversion kit contains the following parts:
Item Component Quantity Item Component Quantity
8 Guide 1 55 Stud 4
11 Bonnet spacer 1 60 Gasket 3
12 Spindle 1 Installation instruction 1
15 Bellows 1
APIAPI
1) Material FFKM “C” is only available as special design (without material number)
87
Item PartBody
material
Flange class
150 300L 300 600 900 1500
Material-No. / Art. No.
5 Nozzle
WCB, LCB, 207.2549.9000 207.2549.9000 207.2969.9000 207.3169.9000 207.3169.9000 207.3169.9000
CF8M CF8M CF8M CF8M CF8M stellited CF8M stellited CF8M stellited
$946 $946 $1,376 $1,376 $1,376 $1,376
WC6 – – 207.2969.9000 207.2969.9000 207.3169.9000 207.3169.9000
CF8M CF8M CF8M stellited CF8M stellited
$1,376 $1,376 $1,376 $1,376
7 Disc
Hardened stainless steel
WCB, LCB, WC6
225.1539.9000 225.1539.9000 225.1639.9000 225.1639.9000 225.1639.9000 225.1639.9000
$413 $413 $413 $413 $413 $413
316L stellited CF8M225.1569.9000 225.1569.9000 225.1669.9000 225.1669.9000 225.1669.9000 225.1669.9000
$826 $826 $826 $826 $826 $826
7
O-ring disc1)
all
205.0849.90X1 205.0849.90X1 205.0949.90X1 205.0949.90X1 205.1049.90X1 205.1049.90X1
CR Neoprene® “K” X: 5 $447 $447 $447 $447 $447 $447
EPDM Buna-EP® “D” X: 4 $447 $447 $447 $447 $447 $447
FKM Viton® “L” X: 7 $447 $447 $447 $447 $447 $447
FFKM Kalrez® “C” X: 9 $791 $791 $791 $791 $791 $791
7.4
O-ring1)
all
502.0313.35X1 502.0313.35X1 502.0313.35X1 502.0313.35X1 502.0313.35X1 502.0313.35X1
CR Neoprene® “K” X: 5 $21 $21 $21 $21 $21 $21
EPDM Buna-EP® “D” X: 4 $21 $21 $21 $21 $21 $21
FKM Viton® “L” X: 7 $28 $28 $28 $28 $28 $28
FFKM Kalrez® “C” X: 9 $413 $413 $413 $413 $413 $413
12
SpindleConventional design
WCB, LCB, WC6
242.7539.0000 242.7539.0000 242.7839.0000 242.7839.0000 242.7839.0000 242.7839.0000
$172 $172 $275 $275 $275 $275
CF8M242.7549.0000 242.7549.0000 242.7849.0000 242.7849.0000 242.7849.0000 242.7849.0000
$275 $275 $379 $379 $379 $379
SpindleBalanced bellows design
WCB, LCB, WC6
244.8939.0000 244.8939.0000 244.9139.0000 244.9139.0000 244.9139.0000 244.9139.0000
$172 $172 $275 $275 $275 $275
CF8M244.8949.0000 244.8949.0000 244.9149.0000 244.9149.0000 244.9149.0000 244.9149.0000
$275 $275 $379 $379 $379 $379
14 Split rings all251.0249.0000 251.0249.0000 251.0349.0000 251.0349.0000 251.0349.0000 251.0349.0000
$7 $7 $14 $14 $14 $14
15BellowsInconel
all400.8579.0421 400.8579.0421 400.8779.0400 400.8779.0400 400.8779.0400 400.8779.0400
$619 $619 $946 $946 $946 $946
57Ballsø [mm], Quantity
all
510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000
3, 12 pieces 3, 12 pieces 3, 15 pieces 3, 15 pieces 3, 15 pieces 3, 15 pieces
$14 $14 $14 $14 $14 $14
60 Gaskets all500.1207.0000 500.1207.0000 500.1607.0000 500.1607.0000 500.1607.0000 500.1607.0000
$14 $14 $34 $34 $34 $34
61Ballsø [mm]
all
510.0204.0000 510.0204.0000 510.0204.0000 510.0204.0000 510.0204.0000 510.0204.0000
9 9 9 9 9 9
$14 $14 $14 $14 $14 $14
69 Axial needle bearing all250.0749.0000 250.0749.0000 250.0849.0000 250.0849.0000 250.0849.0000 250.0849.0000
$55 $55 $69 $69 $69 $69
Bellows
conversion kitall
5021.1354 5021.1354 5021.1355 5021.1355 5021.1355 5021.1355
$946 $946 $1,290 $1,290 $1,290 $1,290
Orifi ce H
Type 526 Spare parts – Orifice H All prices in $
Typ
e 5
26
Sp
are
pa
rts
A bellows conversion kit contains the following parts:
Item Component Quantity Item Component Quantity
8 Guide 1 55 Stud 4
11 Bonnet spacer 1 60 Gasket 3
12 Spindle 1 Installation instruction 1
15 Bellows 1
APIAPI
1) Material FFKM “C” is only available as special design (without material number)
88
Item PartBody
material
Flange class
150 300L 300 600 900 1500
Material-No. / Art. No.
5 Nozzle
WCB, LCB, 207.3049.9000 207.3049.9000 207.3569.9000 207.3569.9000 207.3569.9000 207.3569.9000
WC6, CF8M CF8M CF8M CF8M stellited CF8M stellited CF8M stellited CF8M stellited
$1,118 $1,118 $1,893 $1,893 $1,893 $1,893
7 Disc
Hardened stainless steel
WCB, LCB, WC6
225.1839.9000 225.1839.9000 225.1939.9000 225.1939.9000 225.1939.9000 225.1939.9000
$413 $413 $413 $413 $413 $413
316L stellited CF8M225.1869.9000 225.1869.9000 225.1969.9000 225.1969.9000 225.1969.9000 225.1969.9000
$826 $826 $826 $826 $826 $826
7
O-ring disc1) all
WCB, LCB
205.1149.90X1 205.1149.90X1 205.1249.90X1 205.1249.90X1 205.1249.90X1 205.1249.90X1
CR Neoprene® “K” X: 5 $447 $447 $447 $447 $447 $447
EPDM Buna-EP® “D” X: 4 $447 $447 $447 $447 $447 $447
FKM Viton® “L” X: 7 $447 $447 $447 $447 $447 $447
FFKM Kalrez® “C” X: 9 $826 $826 $826 $826 $826 $826
7.4
O-ring1)
all
502.0408.35X1 502.0408.35X1 502.0408.35X1 502.0408.35X1 502.0408.35X1 502.0408.35X1
CR Neoprene® “K” X: 5 $21 $21 $21 $21 $21 $21
EPDM Buna-EP® “D” X: 4 $21 $21 $21 $21 $21 $21
FKM Viton® “L” X: 7 $41 $41 $41 $41 $41 $41
FFKM Kalrez® “C” X: 9 $482 $482 $482 $482 $482 $482
12
SpindleConventional design
WCB, LCB, WC6
242.7939.0000 242.7939.0000 242.8139.0000 242.8139.0000 242.8139.0000 242.8139.0000
$275 $275 $344 $344 $344 $344
CF8M242.7949.0000 242.7949.0000 242.8149.0000 242.8149.0000 242.8149.0000 242.8149.0000
$379 $379 $482 $482 $482 $482
SpindleBalanced bellows design
WCB, LCB, WC6
244.9139.0000 244.9139.0000 244.9239.0000 244.9239.0000 244.9239.0000 244.9239.0000
$275 $275 $344 $344 $344 $344
CF8M244.9149.0000 244.9149.0000 244.9249.0000 244.9249.0000 244.9249.0000 244.9249.0000
$379 $379 $482 $482 $482 $482
14 Split rings all251.0349.0000 251.0349.0000 251.0449.0000 251.0449.0000 251.0449.0000 251.0449.0000
$14 $14 $14 $14 $14 $14
15BellowsInconel
all400.8879.0400 400.8879.0400 400.8879.0400 400.8879.0400 400.8879.0400 400.8879.0400
$946 $946 $946 $946 $946 $946
57Ballsø [mm], Quantity
all
510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000
3, 15 pieces 3, 15 pieces 3, 15 pieces 3, 15 pieces 3, 15 pieces 3, 15 pieces
$14 $14 $14 $14 $14 $14
60 Gaskets all500.1607.0000 500.1607.0000 500.1907.0000 500.1907.0000 500.1907.0000 500.1907.0000
$34 $34 $34 $34 $34 $34
61Ballsø [mm]
all
510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000
15 15 15 15 15 15
$34 $34 $34 $34 $34 $34
69 Axial needle bearing all250.0849.0000 250.0849.0000 250.0949.0000 250.0949.0000 250.0949.0000 250.0949.0000
$69 $69 $69 $69 $69 $69
Bellows
conversion kitall
5021.1356 5021.1356 5021.1357 5021.1357 5021.1357 5021.1357
$1,290 $1,290 $1,548 $1,548 $1,548 $1,548
Orifi ce J
Type 526 Spare parts – Orifice J All prices in $
Typ
e 5
26
Sp
are
pa
rts
A bellows conversion kit contains the following parts:
Item Component Quantity Item Component Quantity
8 Guide 1 55 Stud 4, 8 depends on fl ange class
11 Bonnet spacer 1 60 Gasket 3
12 Spindle 1 Installation instruction 1
15 Bellows 1
APIAPI
1) Material FFKM “C” is only available as special design (without material number)
89
Item PartBody
material
Flange class
150 300L 300 600 900 1500
Material-No. / Art. No.
5 Nozzle
WCB, LCB, 207.3349.9000 207.3349.9000 207.3349.9000 207.3669.9000 207.4169.9000 207.4269.9000
CF8M CF8M CF8M CF8M CF8M stellited 316 L stellited 316 L stellited
$1,893 $1,893 $1,893 $2,237 $2,237 $2,237
WC6 – – 207.3369.9000 207.3669.9000 207.3669.9000 207.4269.9000
CF8M stellited CF8M stellited CF8M stellited 316 L stellited
$1,893 $2,237 $2,237 $2,237
7 Disc
Hardened stainless steel
WCB, LCB, WC6
225.2139.9000 225.2139.9000 225.2139.9000 225.2139.9000 225.2139.9000 225.2139.9000
$516 $516 $516 $516 $516 $516
316L stellited CF8M225.2169.9000 225.2169.9000 225.2169.9000 225.2169.9000 225.2169.9000 225.2169.9000
$1,118 $1,118 $1,118 $1,118 $1,118 $1,118
7
O-ring disc1)
all
205.1349.90X1 205.1349.90X1 205.1349.90X1 205.1349.90X1 205.1349.90X1 205.1349.90X1
CR Neoprene® “K” X: 5 $516 $516 $516 $516 $516 $516
EPDM Buna-EP® “D” X: 4 $516 $516 $516 $516 $516 $516
FKM Viton® “L” X: 7 $516 $516 $516 $516 $516 $516
FFKM Kalrez® “C” X: 9 $1,376 $1,376 $1,376 $1,376 $1,376 $1,376
7.4
O-ring1)
all
502.0472.35X1 502.0472.35X1 502.0472.35X1 502.0472.35X1 502.0472.35X1 502.0472.35X1
CR Neoprene® “K” X: 5 $21 $21 $21 $21 $21 $21
EPDM Buna-EP® “D” X: 4 $21 $21 $21 $21 $21 $21
FKM Viton® “L” X: 7 $69 $69 $69 $69 $69 $69
FFKM Kalrez® “C” X: 9 $946 $946 $946 $946 $946 $946
12
SpindleConventional design
WCB, LCB, WC6
242.8139.0000 242.8139.0000 242.8139.0000 242.8139.0000 242.8339.0000 242.8339.0000
$344 $344 $344 $344 $344 $344
CF8M242.8149.0000 242.8149.0000 242.8149.0000 242.8149.0000 242.8349.0000 242.8349.0000
$482 $482 $482 $482 $482 $482
SpindleBalanced bellows design
WCB, LCB, WC6
244.9339.0000 244.9339.0000 244.9339.0000 244.9339.0000 244.9439.0000 244.9439.0000
$344 $344 $344 $344 $344 $344
CF8M244.9349.0000 244.9349.0000 244.9349.0000 244.9349.0000 244.9449.0000 244.9449.0000
$482 $482 $482 $482 $482 $482
14 Split rings all251.0449.0000 251.0449.0000 251.0449.0000 251.0449.0000 251.0449.0000 251.0449.0000
$14 $14 $14 $14 $14 $14
15BellowsInconel
all400.8979.0421 400.8979.0421 400.8979.0421 400.8979.0400 400.8979.0400 400.8979.0400
$946 $946 $946 $946 $946 $946
57Ballsø [mm], Quantity
all
510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000
3, 15 pieces 3, 15 pieces 3, 15 pieces 3, 15 pieces 3, 15 pieces 3, 15 pieces
$14 $14 $14 $14 $14 $14
60 Gaskets all500.1907.0000 500.1907.0000 500.1907.0000 500.1907.0000 500.2107.0000 500.2107.0000
$34 $34 $34 $34 $48 $48
61Ballsø [mm]
all
510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000
15 15 15 15 15 15
$34 $34 $34 $34 $34 $34
69 Axial needle bearing all250.0949.0000 250.0949.0000 250.0949.0000 250.0949.0000 250.0949.0000 250.0949.0000
$69 $69 $69 $69 $69 $69
Bellows
conversion kitall
5021.1360 5021.1360 5021.1360 5021.1361 5021.1362 5021.1362
$1,548 $1,548 $1,548 $1,548 $2,581 $2,581
Orifi ce K
Type 526 Spare parts – Orifice K All prices in $
Typ
e 5
26
Sp
are
pa
rts
A bellows conversion kit contains the following parts:
Item Component Quantity Item Component Quantity
8 Guide 1 55 Stud 8
11 Bonnet spacer 1 60 Gasket 2, 3 depends on fl ange class
12 Spindle 1 Installation instruction 1
15 Bellows 1
APIAPI
1) Material FFKM “C” is only available as special design (without material number)
90
Item PartBody
material
Flange class
150 300L 300 600 900 1500
Material-No. / Art. No.
5 Nozzle
WCB, LCB 207.3449.9000 207.3449.9000 207.3769.9000 207.3769.9000 207.4369.9000 207.4369.9000
CF8M CF8M CF8M stellited CF8M stellited CF8M stellited CF8M stellited
$1,893 $1,893 $3,441 $3,441 $3,441 $3,441
WC6 207.3449.9000 207.3449.9000 207.3769.9000 207.3969.9000 207.4369.9000 207.4369.9000
CF8M CF8M CF8M stellited CF8M stellited CF8M stellited CF8M stellited
$1,893 $1,893 $3,441 $3,441 $3,441 $3,441
7 Disc
Hardened stainless steel
WCB, LCB, WC6
225.2539.9000 225.2539.9000 225.2639.9000 225.2639.9000 225.2639.9000 225.2639.9000
$516 $516 $516 $516 $516 $516
316L stellited CF8M225.2569.9000 225.2569.9000 225.2669.9000 225.2669.9000 225.2669.9000 225.2669.9000
$1,118 $1,118 $1,118 $1,118 $1,118 $1,118
7
O-ring disc1)
all
205.1649.90X1 205.1649.90X1 205.1749.90X1 205.1749.90X1 205.1749.90X1 205.1749.90X1
CR Neoprene® “K” X: 5 $516 $516 $516 $516 $516 $516
EPDM Buna-EP® “D” X: 4 $516 $516 $516 $516 $516 $516
FKM Viton® “L” X: 7 $516 $516 $516 $516 $516 $516
FFKM Kalrez® “C” X: 9 $1,634 $1,634 $1,634 $1,634 $1,634 $1,634
7.4
O-ring1)
all
502.0567.35X1 502.0567.35X1 502.0567.35X1 502.0567.35X1 502.0567.35X1 502.0567.35X1
CR Neoprene® “K” X: 5 $28 $28 $28 $28 $28 $28
EPDM Buna-EP® “D” X: 4 $28 $28 $28 $28 $28 $28
FKM Viton® “L” X: 7 $138 $138 $138 $138 $138 $138
FFKM Kalrez® “C” X: 9 $1,204 $1,204 $1,204 $1,204 $1,204 $1,204
12
SpindleConventional design
WCB, LCB, WC6
242.8139.0000 242.8139.0000 242.8239.0000 242.8239.0000 242.8239.0000 242.8239.0000
$344 $344 $344 $344 $344 $344
CF8M242.8149.0000 242.8149.0000 242.8249.0000 242.8249.0000 242.8249.0000 242.8249.0000
$482 $482 $482 $482 $482 $482
SpindleBalanced bellows design
WCB, LCB, WC6
244.9339.0000 244.9339.0000 244.9539.0000 244.9539.0000 244.9539.0000 244.9539.0000
$344 $344 $344 $344 $344 $344
CF8M244.9349.0000 244.9349.0000 244.9549.0000 244.9549.0000 244.9549.0000 244.9549.0000
$482 $482 $482 $482 $482 $482
14 Split rings all251.0449.0000 251.0449.0000 251.0449.0000 251.0449.0000 251.0449.0000 251.0449.0000
$14 $14 $14 $14 $14 $14
15BellowsInconel
all400.9079.0400 400.9079.0400 400.9179.0400 400.9179.0400 400.9179.0400 400.9179.0400
$1,548 $1,548 $1,548 $1,548 $1,548 $1,548
57Ballsø [mm], Quantity
all
510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000
3 mm, 15 pieces 3 mm, 15 pieces 3 mm, 15 pieces 3 mm, 15 pieces 3 mm, 15 pieces 3 mm, 15 pieces
$14 $14 $14 $14 $14 $14
60 Gaskets all500.1907.0000 500.1907.0000 500.2107.0000 500.2107.0000 500.2107.0000 500.2107.0000
$34 $34 $48 $48 $48 $48
61Ballsø [mm]
all
510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000
15 15 15 15 15 15
$34 $34 $34 $34 $34 $34
69 Axial needle bearing all250.0949.0000 250.0949.0000 250.0949.0000 250.0949.0000 250.0949.0000 250.0949.0000
$69 $69 $69 $69 $69 $69
Bellows
conversion kitall
5021.1363 5021.1363 5021.1364 5021.1364 5021.1364 5021.1364
$1,548 $1,548 $2,581 $2,581 $2,581 $2,581
Orifi ce L
Type 526 Spare parts – Orifice L All prices in $
Typ
e 5
26
Sp
are
pa
rts
A bellows conversion kit contains the following parts:
Item Component Quantity Item Component Quantity
8 Guide 1 55 Stud 8
11 Bonnet spacer 1 60 Gasket 3
12 Spindle 1 Installation instruction 1
15 Bellows 1
APIAPI
1) Material FFKM “C” is only available as special design (without material number)
91
Item PartBody
material
Flange class
150 300L 300 600 900
Material-No. / Art. No.
5 NozzleWCB, LCB 207.3869.9000 207.3869.9000 207.3869.9000 207.3869.9000 207.4469.9000
WC6, CF8M $3,441 $3,441 $3,441 $3,441 $3,441
7 Disc
Hardened stainless steel
WCB, LCB, WC6
225.2939.9000 225.2939.9000 225.2939.9000 225.2939.9000 225.2939.9000
$654 $654 $654 $654 $654
316L stellited CF8M225.2969.9000 225.2969.9000 225.2969.9000 225.2969.9000
– $757 $757 $757 $757
7
O-ring disc1)
all
205.1949.90X1 205.1949.90X1 205.1949.90X1 205.1949.90X1 205.1949.90X1
CR Neoprene® “K” X: 5 $688 $688 $688 $688 $688
EPDM Buna-EP® “D” X: 4 $688 $688 $688 $688 $688
FKM Viton® “L” X: 7 $688 $688 $688 $688 $688
FFKM Kalrez® “C” X: 9 $1,893 $1,893 $1,893 $1,893 $1,893
7.4
O-ring1)
all
502.0628.35X1 502.0628.35X1 502.0628.35X1 502.0628.35X1 502.0628.35X1
CR Neoprene® “K” X: 5 $28 $28 $28 $28 $28
EPDM Buna-EP® “D” X: 4 $28 $28 $28 $28 $28
FKM Viton® “L” X: 7 $138 $138 $138 $138 $138
FFKM Kalrez® “C” X: 9 $1,204 $1,204 $1,204 $1,204 $1,204
12
SpindleConventional design
WCB, LCB, WC6
242.8239.0000 242.8239.0000 242.8239.0000 242.8239.0000 242.8239.0000
$344 $344 $344 $344 $344
CF8M242.8249.0000 242.8249.0000 242.8249.0000 242.8249.0000 242.8249.0000
$482 $482 $482 $482 $482
SpindleBalanced bellows design
WCB, LCB, WC6
244.9539.0000 244.9539.0000 244.9539.0000 244.9539.0000 244.9539.0000
$344 $344 $344 $344 $344
CF8M244.9549.0000 244.9549.0000 244.9549.0000 244.9549.0000 244.9549.0000
$482 $482 $482 $482 $482
14 Split rings all251.0449.0000 251.0449.0000 251.0449.0000 251.0449.0000 251.0449.0000
$14 $14 $14 $14 $14
15BellowsInconel
all400.9279.0421 400.9279.0421 400.9279.0421 400.9279.0400 400.9279.0400
$1,548 $1,548 $1,548 $1,548 $1,548
57Ballsø [mm], Quantity
all
510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000
3, 15 pieces 3, 15 pieces 3, 15 pieces 3, 15 pieces 3, 15 pieces
$14 $14 $14 $14 $14
60 Gaskets all500.2107.0000 500.2107.0000 500.2107.0000 500.2107.0000 500.2107.0000
$48 $48 $48 $48 $48
61Ballsø [mm]
all
510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000
15 15 15 15 15
$34 $34 $34 $34 $34
69 Axial needle bearing all250.0949.0000 250.0949.0000 250.0949.0000 250.0949.0000 250.0949.0000
$69 $69 $69 $69 $69
Bellows
conversion kitall
5021.1365 5021.1365 5021.1365 5021.1366 5021.1366
$2,581 $2,581 $2,581 $2,581 $2,581
Orifi ce M
Type 526 Spare parts – Orifice M All prices in $
Typ
e 5
26
Sp
are
pa
rts
A bellows conversion kit contains the following parts:
Item Component Quantity Item Component Quantity
8 Guide 1 55 Stud 8
11 Bonnet spacer 1 60 Gasket 3
12 Spindle 1 Installation instruction 1
15 Bellows 1
APIAPI
1) Material FFKM “C” is only available as special design (without material number)
92
Item PartBody
material
Flange class
150 300L 300 600 900
Material-No. / Art. No.
5 NozzleWCB, LCB 207.4069.9000 207.4069.9000 207.4069.9000 207.4069.9000 207.4069.9000
WC6, CF8M $3,441 $3,441 $3,441 $3,441 $3,441
7 Disc
Hardened stainless steel
WCB, LCB, WC6
225.3239.9000 225.3239.9000 225.3239.9000 225.3239.9000 225.3239.9000
$654 $654 $654 $654 $654
316L stellited CF8M225.3269.9000 225.3269.9000 225.3269.9000 225.3269.9000 225.3269.9000
$757 $757 $757 $757 $757
7
O-ring disc1)
all
205.2149.90X1 205.2149.90X1 205.2149.90X1 205.2149.90X1 205.2149.90X1
CR Neoprene® “K” X: 5 $688 $688 $688 $688 $688
EPDM Buna-EP® “D” X: 4 $688 $688 $688 $688 $688
FKM Viton® “L” X: 7 $688 $688 $688 $688 $688
FFKM Kalrez® “C” X: 9 $1,893 $1,893 $1,893 $1,893 $1,893
7.4
O-ring1)
all
502.0692.53X1 502.0692.53X1 502.0692.53X1 502.0692.53X1 502.0692.53X1
CR Neoprene® “K” X: 5 $28 $28 $28 $28 $28
EPDM Buna-EP® “D” X: 4 $28 $28 $28 $28 $28
FKM Viton® “L” X: 7 $138 $138 $138 $138 $138
FFKM Kalrez® “C” X: 9 $1,204 $1,204 $1,204 $1,204 $1,204
12
SpindleConventional design
WCB, LCB, WC6
242.8239.0000 242.8239.0000 242.8239.0000 242.8239.0000 242.8239.0000
$344 $344 $344 $344 $344
CF8M242.8249.0000 242.8249.0000 242.8249.0000 242.8249.0000 242.8249.0000
$482 $482 $482 $482 $482
SpindleBalanced bellows design
WCB, LCB, WC6
244.9539.0000 244.9539.0000 244.9539.0000 244.9539.0000 244.9539.0000
$344 $344 $344 $344 $344
CF8M244.9549.0000 244.9549.0000 244.9549.0000 244.9549.0000 244.9549.0000
$482 $482 $482 $482 $482
14 Split rings all251.0449.0000 251.0449.0000 251.0449.0000 251.0449.0000 251.0449.0000
$14 $14 $14 $14 $14
15BellowsInconel
all400.9379.0421 400.9379.0421 400.9379.0421 400.9379.0400 400.9379.0400
$2,237 $2,237 $2,237 $2,237 $2,237
57Ballsø [mm], Quantity
all
510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000
3, 15 pieces 3, 15 pieces 3, 15 pieces 3, 15 pieces 3, 15 pieces
$14 $14 $14 $14 $14
60 Gaskets all500.2107.0000 500.2107.0000 500.2107.0000 500.2107.0000 500.2107.0000
$48 $48 $48 $48 $48
61Ballsø [mm]
all
510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000
15 15 15 15 15
$34 $34 $34 $34 $34
69 Axial needle bearing all250.0949.0000 250.0949.0000 250.0949.0000 250.0949.0000 250.0949.0000
$69 $69 $69 $69 $69
Bellows
conversion kitall
5021.1370 5021.1370 5021.1370 5021.1371 5021.1371
$2,581 $2,581 $2,581 $2,581 $2,581
Orifi ce N
Type 526 Spare parts – Orifice N All prices in $
Typ
e 5
26
Sp
are
pa
rts
A bellows conversion kit contains the following parts:
Item Component Quantity Item Component Quantity
8 Guide 1 55 Stud 8, 12 depends on fl ange class
11 Bonnet spacer 1 60 Gasket 3
12 Spindle 1 Installation instruction 1
15 Bellows 1
APIAPI
1) Material FFKM “C” is only available as special design (without material number)
93
Orifi ce P
Type 526 Spare parts – Orifice P All prices in $
Item PartBody
material
Flange class
150 300L 300 600 900
Material-No. / Art. No.
5 NozzleWCB, LCB 207.4569.9000 207.4569.9000 207.4669.9000 207.4669.9000 207.4669.9000
WC6, CF8M $3,441 $3,441 $3,441 $3,441 $3,441
7 Disc
Hardened stainless steel
WCB, LCB, WC6
225.3439.9000 225.3439.9000 225.3539.9000 225.3539.9000 225.3539.9000
$1,032 $1,032 $1,032 $1,032 $1,032
316L stellited CF8M225.3469.9000 225.3469.9000 225.3569.9000 225.3569.9000 225.3569.9000
$2,065 $2,065 $2,065 $2,065 $2,065
7
O-ring disc1)
all
205.2349.90X1 205.2349.90X1 205.2449.90X1 205.2449.90X1 205.2449.90X1
CR Neoprene® “K” X: 5 $1,118 $1,118 $1,118 $1,118 $1,118
EPDM Buna-EP® “D” X: 4 $1,118 $1,118 $1,118 $1,118 $1,118
FKM Viton® “L” X: 7 $1,118 $1,118 $1,118 $1,118 $1,118
FFKM Kalrez® “C” X: 9 $2,581 $2,581 $2,581 $2,581 $2,581
7.4
O-ring1)
all
502.0850.35X1 502.0850.35X1 502.0850.35X1 502.0850.35X1 502.0850.35X1
CR Neoprene® “K” X: 5 $28 $28 $28 $28 $28
EPDM Buna-EP® “D” X: 4 $28 $28 $28 $28 $28
FKM Viton® “L” X: 7 $172 $172 $172 $172 $172
FFKM Kalrez® “C” X: 9 $1,548 $1,548 $1,548 $1,548 $1,548
12
SpindleConventional design
WCB, LCB, WC6
242.8239.0000 242.8239.0000 242.8239.0000 242.8239.0000 242.8239.0000
$344 $344 $619 $619 $619
CF8M242.8249.0000 242.8249.0000 242.8449.0000 242.8449.0000 242.8449.0000
$482 $482 $826 $826 $826
SpindleBalanced bellows design
WCB, LCB, WC6
244.9539.0000 244.9539.0000 244.9639.0000 244.9639.0000 244.9639.0000
$344 $344 $619 $619 $619
CF8M244.9549.0000 244.9549.0000 244.9649.0000 244.9649.0000 244.9649.0000
$482 $482 $826 $826 $826
14 Split rings all251.0449.0000 251.0449.0000 251.0449.0000 251.0449.0000 251.0449.0000
$14 $14 $14 $14 $14
15BellowsInconel
all400.9479.0400 400.9479.0400 400.9579.0400 400.9579.0400 400.9579.0400
$2,237 $2,237 $2,237 $2,237 $2,237
57Ballsø [mm], Quantity
all
510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000
3, 15 pieces 3, 15 pieces 3, 15 pieces 3, 15 pieces 3, 15 pieces
$14 $14 $14 $14 $14
60 Gaskets all500.2107.0000 500.2107.0000 500.2207.0000 500.2207.0000 500.2207.0000
$48 $48 $86 $86 $86
61Ballsø [mm]
all
510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000
15 15 15 15 15
$34 $34 $34 $34 $34
69 Axial needle bearing all250.0949.0000 250.0949.0000 250.1049.0000 250.1049.0000 250.1049.0000
$69 $69 $155 $155 $155
Bellows
conversion kitall
5021.1372 5021.1372 5021.1373 5021.1373 5021.1373
$2,581 $2,581 $3,957 $3,957 $3,957
Typ
e 5
26
Sp
are
pa
rts
A bellows conversion kit contains the following parts:
Item Component Quantity Item Component Quantity
8 Guide 1 55 Stud 12
11 Bonnet spacer 1 60 Gasket 3
12 Spindle 1 Installation instruction 1
15 Bellows 1
APIAPI
1) Material FFKM “C” is only available as special design (without material number)
94
Orifi ce Q
Item PartBody
material
Flange class
150 300L 300 600
Material-No. / Art. No.
5 NozzleWCB, LCB 207.4769.9000 207.4769.9000 207.4769.9000 207.4769.9000
WC6, CF8M $3,957 $3,957 $3,957 $3,957
7 Disc
Hardened stainless steel
WCB, LCB, WC6
225.3639.9000 225.3639.9000 225.3639.9000 225.3639.9000
$1,032 $1,032 $1,032 $1,032
316L stellited CF8M225.3669.9000 225.3669.9000 225.3669.9000 225.3669.9000
$2,065 $2,065 $2,065 $2,065
7
O-ring disc1)
all
205.2549.90X1 205.2549.90X1 205.2549.90X1 205.2549.90X1
CR Neoprene® “K” X: 5 $1,118 $1,118 $1,118 $1,118
EPDM Buna-EP® “D” X: 4 $1,118 $1,118 $1,118 $1,118
FKM Viton® “L” X: 7 $1,118 $1,118 $1,118 $1,118
FFKM Kalrez® “C” X: 9 $3,269 $3,269 $3,269 $3,269
7.4
O-ring1)
all
502.1104.53X1 502.1104.53X1 502.1104.53X1 502.1104.53X1
CR Neoprene® “K” X: 5 $28 $28 $28 $28
EPDM Buna-EP® “D” X: 4 $28 $28 $28 $28
FKM Viton® “L” X: 7 $241 $241 $241 $241
FFKM Kalrez® “C” X: 9 $2,409 $2,409 $2,409 $2,409
12
SpindleConventional design
WCB, LCB, WC6
242.8539.0000 242.8539.0000 242.8539.0000 242.8539.0000
$619 $619 $619 $619
CF8M242.8549.0000 242.8549.0000 242.8549.0000 242.8549.0000
$826 $826 $826 $826
SpindleBalanced bellows design
WCB, LCB, WC6
244.9739.0000 244.9739.0000 244.9739.0000 244.9739.0000
$619 $619 $619 $619
CF8M244.9749.0000 244.9749.0000 244.9749.0000 244.9749.0000
$826 $826 $826 $826
14 Split rings all251.0549.0000 251.0549.0000 251.0549.0000 251.0549.0000
$28 $28 $28 $28
15BellowsInconel
all400.9679.0400 400.9679.0400 400.9679.0400 400.9679.0400
$3,269 $3,269 $3,269 $3,269
57Ballsø [mm], Quantity
all
510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000
3, 15 pieces 3, 15 pieces 3, 15 pieces 3, 15 pieces
$14 $14 $14 $14
60 Gaskets all500.2207.0000 500.2207.0000 500.2207.0000 500.2207.0000
$86 $86 $86 $86
61Ballsø [mm]
all
510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000
15 15 15 15
$34 $34 $34 $34
69 Axial needle bearing all250.1049.0000 250.1049.0000 250.1049.0000 250.1049.0000
$155 $155 $155 $155
Bellows
conversion kitall
5021.1374 5021.1374 5021.1374 5021.1374
$3,957 $3,957 $3,957 $3,957
Typ
e 5
26
Sp
are
pa
rts
Type 526 Spare parts – Orifice Q All prices in $
A bellows conversion kit contains the following parts:
Item Component Quantity Item Component Quantity
8 Guide 1 55 Stud 12
11 Bonnet spacer 1 60 Gasket 2, 3 depends on fl ange class
12 Spindle 1 Installation instruction 1
15 Bellows 1
APIAPI
1) Material FFKM “C” is only available as special design (without material number)
95
Orifi ce R
Type 526 Spare parts – Orifice R All prices in $
Item PartBody
material
Flange class
150 300L 300 600
Material-No. / Art. No.
5 NozzleWCB, LCB 207.4869.9000 207.4869.9000 207.5769.9000 207.5769.9000
WC6, CF8M $3,957 $3,957 $3,957 $3,957
7 Disc
Hardened stainless steel
WCB, LCB, WC6
225.3739.9000 225.3739.9000 225.3839.9000 225.3839.9000
$1,548 $1,548 $1,548 $1,548
316L stellited CF8M225.3769.9000 225.3769.9000 225.3869.9000 225.3869.9000
$2,753 $2,753 $2,753 $2,753
7
O-ring disc1)
all
205.2649.90X1 205.2649.90X1 205.2649.90X1 205.2649.90X1
CR Neoprene® “K” X: 5 $1,548 $1,548 $1,548 $1,548
EPDM Buna-EP® “D” X: 4 $1,548 $1,548 $1,548 $1,548
FKM Viton® “L” X: 7 $1,548 $1,548 $1,548 $1,548
FFKM Kalrez® “C” X: 9 $4,129 $4,129 $4,129 $4,129
7.4
O-ring1)
all
502.1327.53X1 502.1327.53X1 502.1327.53X1 502.1327.53X1
CR Neoprene® “K” X: 5 $28 $28 $28 $28
EPDM Buna-EP® “D” X: 4 $28 $28 $28 $28
FKM Viton® “L” X: 7 $310 $310 $310 $310
FFKM Kalrez® “C” X: 9 $2,581 $2,581 $2,581 $2,581
12
SpindleConventional design
WCB, LCB, WC6
242.8539.0000 242.8539.0000 242.8639.0000 242.8639.0000
$619 $619 $1,376 $1,376
CF8M242.8549.0000 242.8549.0000 242.8649.0000 242.8649.0000
$826 $826 $1,720 $1,720
SpindleBalanced bellows design
WCB, LCB, WC6
244.9739.0000 244.9739.0000 244.9839.0000 244.9839.0000
$619 $619 $1,376 $1,376
CF8M244.9749.0000 244.9749.0000 244.9849.0000 244.9849.0000
$826 $826 $1,720 $1,720
14 Split rings all251.0549.0000 251.0549.0000 251.1949.0000 251.1949.0000
$28 $28 $41 $41
15BellowsInconel
all400.9779.0421 400.9779.0421 400.9779.0400 400.9779.0400
$3,957 $3,957 $3,957 $3,957
57Ballsø [mm], Quantity
all
510.0604.0000 510.0604.0000 510.0604.0000 510.0604.0000
3, 15 pieces 3, 15 pieces 3, 15 pieces 3, 15 pieces
$14 $14 $14 $14
60 Gaskets all500.2207.0000 500.2207.0000 500.2807.0000 500.2807.0000
$86 $86 $172 $172
61Ballsø [mm]
all
510.0404.0000 510.0404.0000 510.0404.0000 510.0404.0000
15 15 15 15
$34 $34 $34 $34
69 Axial needle bearing all250.1049.0000 250.1049.0000 250.1049.0000 250.1049.0000
$155 $155 $155 $155
Bellows
conversion kitall
5021.1375 5021.1375 5021.1376 5021.1376
$3,957 $3,957 $3,957 $3,957
Typ
e 5
26
Sp
are
pa
rts
A bellows conversion kit contains the following parts:
Item Component Quantity Item Component Quantity
8 Guide 1 55 Stud 12
11 Bonnet spacer 1 60 Gasket 2, 3 depends on fl ange class
12 Spindle 1 Installation instruction 1
15 Bellows 1
APIAPI
1) Material FFKM “C” is only available as special design (without material number)
96
Orifi ce T
Item PartBody
material
Flange class
150 300L 300
Material-No. / Art. No.
5 NozzleWCB, LCB 207.5969.9000 207.5969.9000 207.5969.9000
WC6, CF8M $4,473 $4,473 $4,473
7 Disc
Hardened stainless steel
WCB, LCB, WC6
225.3939.9000 225.3939.9000 225.3939.9000
$2,581 $2,581 $2,581
316L stellited CF8M225.3969.9000 225.3969.9000 225.3969.9000
$4,817 $4,817 $4,817
7
O-ring disc1)
all
205.2849.90X1 205.2849.90X1 205.2849.90X1
CR Neoprene® “K” X: 5 $2,925 $2,925 $2,925
EPDM Buna-EP® “D” X: 4 $2,925 $2,925 $2,925
FKM Viton® “L” X: 7 $2,925 $2,925 $2,925
FFKM Kalrez® “C” X: 9 $6,366 $6,366 $6,366
7.4
O-ring1)
all
502.1644.53X1 502.1644.53X1 502.1644.53X1
CR Neoprene® “K” X: 5 $28 $28 $28
EPDM Buna-EP® “D” X: 4 $28 $28 $28
FKM Viton® “L” X: 7 $447 $447 $447
FFKM Kalrez® “C” X: 9 $3,785 $3,785 $3,785
12
SpindleConventional design
WCB, LCB, WC6
242.8639.0000 242.8639.0000 242.8639.0000
$1,376 $1,376 $1,376
CF8M242.8649.0000 242.8649.0000 242.8649.0000
$1,720 $1,720 $1,720
SpindleBalanced bellows design
WCB, LCB, WC6
244.9839.0000 244.9839.0000 244.9839.0000
$1,376 $1,376 $1,376
CF8M244.9849.0000 244.9849.0000 244.9849.0000
$1,720 $1,720 $1,720
14 Split rings all251.1949.0000 251.1949.0000 251.1949.0000
$41 $41 $41
15BellowsInconel
all400.9879.0400 400.9879.0400 400.9879.0400
$5,505 $5,505 $5,505
57Ballsø [mm], Quantity
all
510.0604.0000 510.0604.0000 510.0604.0000
3, 15 pieces 3, 15 pieces 3, 15 pieces
$14 $14 $14
60 Gaskets all500.2807.0000 500.2807.0000 500.2807.0000
$172 $172 $172
61Ballsø [mm]
all
510.0404.0000 510.0404.0000 510.0404.0000
15 15 15
$34 $34 $34
69 Axial needle bearing all250.1049.0000 250.1049.0000 250.1049.0000
$155 $155 $155
Bellows
conversion kitall
5021.1377 5021.1377 5021.1377
$5,505 $5,505 $5,505
Typ
e 5
26
Sp
are
pa
rts
Type 526 Spare parts – Orifice T
A bellows conversion kit contains the following parts:
Item Component Quantity Item Component Quantity
8 Guide 1 55 Stud 12
11 Bonnet spacer 1 60 Gasket 2
12 Spindle 1 Installation instruction 1
15 Bellows 1
All prices in $
APIAPI
1) Material FFKM “C” is only available as special design (without material number)
97
Soft seal selection
Soft seal disc Set pressure and size limits
Material Orifi ce
Pressure
range
Pressure
range
min. max.[bar] [psig] [bar] [psig]
CR D – K 0.3 4 102 1480
NBR L – M 0.3 4 75.8 1100
EPDM N – P 0.3 4 68.9 1000
FKM Q 0.3 4 41.3 600
FFKM R – T 0.3 4 20.6 300
VESPELSP-1® D – G 10 150 400 5800
Kel-F® D – T 1 15 300 4350
Tefl on® D – T 1 15 10 145
Soft seal selection
CodeTrademarks
(Designation)Company
Code-
letter1)
Option
Code
Tmin TmaxApplication2)
[°F] [°C] [°F] [°C]
O-ring
CR Neoprene® DuPont K J21 -40 -40 212 100Parafi n oil, silicone oil and grease, water and waterbased solvents, refrigerants, ozone
NBR Buna-N®
(Nitrile-Butadiene) DuPont N J30 -13 -25 230 110 Hydraulic oil, vegetable and animal grease and oil
EPDMBuna-EP®
(Ethylene-Propylene-Diene)
Bayer D J22 -49 -45 302 150Hot water and superheated steam up to 302° F, several organic and inorganic acids, silicone oil and grease, FDA compliant
FPM(FKM)
Viton®
(Fluorocarbon) DuPont L J23 -4 -20 356 180
High temperature service (no steam or hot water), mineral oil and grease, silicone oil and grease, vegetable and animal grease and oil, ozone, FDA compliant compound
FFKM Kalrez®
(Perfluoro) DuPont C J20 32 0 482 250Nearly all chemicals, standard compound is Kalrez® 6230 or ISOLAST® J9515, FDA and USP VI compliant compound
Sealing plate
SP VESPEL SP-1®
(Polyimide) DuPont T J49 -454 -270 536 280High temperature and high pressure applications (no steam), for chemical resitance refer to manufactures guide
PCTFEKEL-F®
(Polychlorotrifl uor-ethylene)
3M G J48 -400 -240 302 150Cyrogenic and refrigeration applications fl ammable media, gaseous oxygene application up to 725 psig at 140 °F
PTFE Teflon®
(Polytetrafl uor ethylene) DuPont A J44 -300 -184 302 150 Nearly all chemicals
Other than listed XFor other materials
please contact LESER LLC
So
ft s
ea
l
se
lec
tio
n
1) The code letters will be stamped on the disc. 2) Pressure and temperature service must be considered in any case.
Chemical resistance and the temperature limits depend on O-ring manufacturer information. LESER can not take any warranty.
APIAPI
98
APIAPI Available options
Ava
ila
ble
op
tio
ns
Butt-weld connection
S05
Open bonnet
See Art. No.
Lift indicator
J39: Adaptor for lift indicator H4J93: Lift indicator
Heating jacket
Balanced bellows
J83: Inconel
High temperature equipment
J88
Bellows conversion kit
Plain lever H3
H3
Test gag
J69: H4J70: H2
O-ring disc
J21: CR Neoprene® “K” J22: EPDM Buna-EP® “D”J23: FPM/FKM Viton® “L”J20: FFKM Kalrez® “C”
Disc with inserted sealing plate J44+S07: PTFE-FDA “A”J48+S07: PCTFE “G”J49+S07: SP “T”
Packed lever H4
H4
Screwed cap H2
H2
Bug screen
M70
Bolted cap H1
K01Bolted lifting device H6
K06
99
Hig
h
Eff
icie
nc
y
HighEfficiencyHighEfficiency
Pilot Operated Safety Valve
Series 810, 820 Page
• Type 8112 WCB – Pop Action 100
• Type 8114 CF8M – Pop Action 102
• Type 8113 LCB – Pop Action 104
• Options Type 811 106
• Type 8212 – Modulate Action 110
• Type 8214 – Modulate Action 112
• Type 8213 – Modulate Action 114
• Options Type 821 116
• Weights 120
• Flange drillings and facings 122
• Flange facings,
Inspections, Certificates123
• Spare parts kits 124
• Available Options 128
100
High EfficiencyHigh EfficiencyAll prices in $
Available fl ange ratings and fl ange facings
on page 122 and 123
Typ
e 8
11
Type 811 WCB 1.0619 Pop Action
Valve size 1" x 2" 11/2" x 2" 11/2" x 3" 2" x 3"
Standard Orifice acc. to API 526
D E F D E F G H G H J
Extra Orifice G H J K+
Body material: WCB 1.0619
Flange class Art. No.
150 x 1508112. 0010 0020 0030 1820 0040 0050 0060 1830 0070 0080 1840 0090 0100 0110 1850
$2,072 $2,072 $2,072 $2,072 $2,072 $2,072 $2,072 $2,072 $2,333 $2,333 $2,333 $2,677 $2,677 $2,677 $2,677
300 x 1508112. 0220 0230 0240 1900 0250 0260 0270 1910 0280 0290 1920 0300 0310 0320 1930
$2,072 $2,072 $2,072 $2,072 $2,072 $2,072 $2,072 $2,072 $2,333 $2,333 $2,333 $2,677 $2,677 $2,677 $2,677
300 x 3001)8112. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
H65 $3,687 $3,687 $3,687 $4,022 $4,022 $4,022 $4,190 $4,190 $4,580 $4,580 $4,580
600 x 1508112. 0640 0650 0660 2060 0670 0680 0690 2070 0700 0710 2080 0720 0730 0740 2090
$2,126 $2,126 $2,126 $2,126 $2,203 $2,203 $2,203 $2,203 $2,521 $2,521 $2,521 $3,296 $3,296 $3,296 $3,296
600 x 3001)8112. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
H67 $3,687 $3,687 $3,687 $4,022 $4,022 $4,022 $4,190 $4,190 $4,580 $4,580 $4,580
900 x 3008112. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
$3,687 $3,687 $3,687 $4,022 $4,022 $4,022 $4,190 $4,190 $4,580 $4,580 $4,580
1500 x 3008112. 1240 1250 1260 – 1270 1280 1290 – 1300 1310 – 1320 1330 1340 –
$3,687 $3,687 $3,687 $4,022 $4,022 $4,022 $4,190 $4,190 $4,580 $4,580 $4,580
1) Flange rating class 300:– in addition to API specification– different center to face dimensions– Article number and design of higher pressure types with additional option code.
POSV for high pressure
101
High EfficiencyHigh EfficiencyAll prices in $
Typ
e 8
11
Type 811 WCB 1.0619 Pop Action
Valve size 3" x 4" 4" x 6" 6" x 8" 8" x 10"
Standard Orifice acc. to API 526
J K L L M N P Q R T
Extra Orifice N+ P+ R+ T+
Body material: WCB 1.0619
Flange class Art. No.
150 x 1508112. 0120 0130 0140 1860 0150 0160 0170 0180 1870 0190 0200 1880 0210 1890
$3,678 $3,678 $3,678 $3,678 $5,873 $5,873 $5,873 $5,873 $5,873 $8,737 $8,737 $8,737 $14,399 $14,399
300 x 1508112. 0330 0340 0350 1940 0360 0370 0380 0390 1950 0400 0410 1960 0420 1970
$3,678 $3,678 $3,678 $3,678 $5,873 $5,873 $5,873 $5,873 $5,873 $8,737 $8,737 $8,737 $14,399 $14,399
300 x 3001)8112. 1170 1180 1190 – 1200 1210 1220 1230 – 10302) 10402) – 10502) –
H65 $5,586 $5,586 $5,586 $7,988 $7,988 $7,988 $7,988 $12,359 $12,359 $17,222
600 x 1508112. 0750 0760 0770 2100 0780 0790 0800 0810 2110 0820 0830 2120 0840 2130
$4,269 $4,269 $4,269 $4,269 $6,476 $6,476 $6,476 $6,476 $6,476 $10,149 $10,149 $10,149 $15,045 $15,045
600 x 3001)8112. 1170 1180 1190 – 1200 1210 1220 1230 – 10302) 10402) – 10502) –
H67 $5,586 $5,586 $5,586 $7,988 $7,988 $7,988 $7,988 $12,359 $12,359 $17,222
900 x 3008112. 1170 1180 1190 – 1200 1210 1220 1230 –
$5,586 $5,586 $5,586 $7,988 $7,988 $7,988 $7,988
1500 x 3008112. 1350 1360 1370 – 1380 1390 1400 1410 –
$5,586 $5,586 $5,586 $7,988 $7,988 $7,988 $7,988
1) Flange rating class 300:– in addition to API specification– different center to face dimensions– Article number and design of higher pressure types with additional option code.
2) Delivery time 6 – 8 weeks
102
Type 811 CF8M 1.4408 Pop Action
Valve size 1" x 2" 11/2" x 2" 11/2" x 3" 2" x 3"
Standard Orifice acc. to API 526
D E F D E F G H G H J
Extra Orifice G H J K+
Body material: CF8M 1.4408
Flange class Art. No.
150 x 1508114. 0010 0020 0030 1820 0040 0050 0060 1830 0070 0080 1840 0090 0100 0110 1850
$4,173 $4,173 $4,173 $4,173 $4,531 $4,531 $4,531 $4,531 $4,767 $4,767 $4,767 $5,007 $5,007 $5,007 $5,007
300 x 1508114. 0220 0230 0240 1900 0250 0260 0270 1910 0280 0290 1920 0300 0310 0320 1930
$4,173 $4,173 $4,173 $4,173 $4,767 $4,767 $4,767 $4,767 $4,767 $4,767 $4,767 $5,007 $5,007 $5,007 $5,007
300 x 3001)8114. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
H65 $6,815 $6,815 $6,815 $7,318 $7,318 $7,318 $7,654 $7,654 $8,044 $8,044 $8,044
600 x 1508114. 0640 0650 0660 2060 0670 0680 0690 2070 0700 0710 2080 0720 0730 0740 2090
$4,531 $4,531 $4,531 $4,531 $5,151 $5,151 $5,151 $5,151 $5,151 $5,151 $5,151 $5,364 $5,364 $5,364 $5,364
600 x 3001)8114. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
H67 $6,815 $6,815 $6,815 $7,318 $7,318 $7,318 $7,654 $7,654 $8,044 $8,044 $8,044
900 x 3008114. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
$6,815 $6,815 $6,815 $7,318 $7,318 $7,318 $7,654 $7,654 $8,044 $8,044 $8,044
1500 x 3008114. 1240 1250 1260 – 1270 1280 1290 – 1300 1310 – 1320 1330 1340 –
$6,815 $6,815 $6,815 $7,318 $7,318 $7,318 $7,654 $7,654 $8,044 $8,044 $8,044
High EfficiencyHigh EfficiencyAll prices in $
Available fl ange ratings and fl ange facings
on page 122 and 123
Typ
e 8
11
POSV for high pressure
1) Flange rating class 300:– in addition to API specification– different center to face dimensions– Article number and design of higher pressure types with additional option code.
103
Type 811 CF8M 1.4408 Pop Action
Valve size 3" x 4" 4" x 6" 6" x 8" 8" x 10"
Standard Orifice acc. to API 526
J K L L M N P Q R T
Extra Orifice N+ P+ R+ T+
Body material: CF8M 1.4408
Flange class Art. No.
150 x 1508114. 0120 0130 0140 1860 0150 0160 0170 0180 1870 0190 0200 1880 0210 1890
$6,615 $6,615 $6,615 $6,615 $9,716 $9,716 $9,716 $9,716 $9,716 $14,305 $14,305 $14,305 $20,027 $20,027
300 x 1508114. 0330 0340 0350 1940 0360 0370 0380 0390 1950 0400 0410 1960 0420 1970
$6,615 $6,615 $6,615 $6,615 $9,716 $9,716 $9,716 $9,716 $9,716 $14,305 $14,305 $14,305 $20,027 $20,027
300 x 3001)8114. 1170 1180 1190 – 1200 1210 1220 1230 – 10302) 10402) –– 10502)
H65 $8,770 $8,770 $8,770 $12,513 $12,513 $12,513 $12,513 $18,849 $18,849 $25,048
600 x 1508114. 0750 0760 0770 2100 0780 0790 0800 0810 2110 0820 0830 2120 0840 2130
$7,271 $7,271 $7,271 $7,271 $10,253 $10,253 $10,253 $10,253 $10,253 $15,498 $15,498 $15,498 $21,696 $21,696
600 x 3001)8114. 1170 1180 1190 – 1200 1210 1220 1230 – 10302) 10402) – 10502) –
H67 $8,770 $8,770 $8,770 $12,513 $12,513 $12,513 $12,513 $18,849 $18,849 $25,048
900 x 3008114. 1170 1180 1190 – 1200 1210 1220 1230 –
$8,770 $8,770 $8,770 $12,513 $12,513 $12,513 $12,513
1500 x 3008114. 1350 1360 1370 – 1380 1390 1400 1410 –
$8,770 $8,770 $8,770 $12,513 $12,513 $12,513 $12,513
High EfficiencyHigh EfficiencyAll prices in $
Typ
e 8
11
1) Flange rating class 300:– in addition to API specification– different center to face dimensions– Article number and design of higher pressure types with additional option code.
2) Delivery time 6 – 8 weeks
104
High EfficiencyHigh EfficiencyAll prices in $
Available fl ange ratings and fl ange facings
on page 122 and 123
Typ
e 8
11
Type 811 LCB Pop Action
Valve size 1" x 2" 11/2" x 2" 11/2" x 3" 2" x 3"
Standard Orifice acc. to API 526
D E F D E F G H G H J
Extra Orifice G H J K+
Body material: LCB
Flange class Art. No.
150 x 1508113. 0010 0020 0030 1820 0040 0050 0060 1830 0070 0080 1840 0090 0100 0110 1850
$2,280 $2,280 $2,280 $2,280 $2,280 $2,280 $2,280 $2,280 $2,566 $2,566 $2,566 $2,945 $2,945 $2,945 $2,945
300 x 1508113. 0220 0230 0240 1900 0250 0260 0270 1910 0280 0290 1920 0300 0310 0320 1930
$2,280 $2,280 $2,280 $2,280 $2,280 $2,280 $2,280 $2,280 $2,566 $2,566 $2,566 $2,945 $2,945 $2,945 $2,945
300 x 3001)8113. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
H65 $4,056 $4,056 $4,056 $4,424 $4,424 $4,424 $4,608 $4,608 $5,039 $5,039 $5,039
600 x 1508113. 0640 0650 0660 2060 0670 0680 0690 2070 0700 0710 2080 0720 0730 0740 2090
$2,340 $2,340 $2,340 $2,340 $2,424 $2,424 $2,424 $2,424 $2,773 $2,773 $2,773 $3,625 $3,625 $3,625 $3,625
600 x 3001)8113. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
H67 $4,056 $4,056 $4,056 $4,424 $4,424 $4,424 $4,608 $4,608 $5,039 $5,039 $5,039
900 x 3008113. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
$4,056 $4,056 $4,056 $4,424 $4,424 $4,424 $4,608 $4,608 $5,039 $5,039 $5,039
1500 x 3008113. 1240 1250 1260 – 1270 1280 1290 – 1300 1310 – 1320 1330 1340 –
$4,056 $4,056 $4,056 $4,424 $4,424 $4,424 $4,608 $4,608 $5,039 $5,039 $5,039
1) Flange rating class 300:– in addition to API specification– different center to face dimensions– Article number and design of higher pressure types with additional option code.
POSV for high pressure
105
High EfficiencyHigh EfficiencyAll prices in $
Typ
e 8
11
Type 811 LCB Pop Action
Valve size 3" x 4" 4" x 6" 6" x 8" 8" x 10"
Standard Orifice acc. to API 526
J K L L M N P Q R T
Extra Orifice N+ P+ R+ T+
Body material: LCB
Flange class Art. No.
150 x 1508113. 0120 0130 0140 1860 0150 0160 0170 0180 1870 0190 0200 1880 0210 1890
$4,045 $4,045 $4,045 $4,045 $6,459 $6,459 $6,459 $6,459 $6,459 $9,612 $9,612 $9,612 $15,839 $15,839
300 x 1508113. 0330 0340 0350 1940 0360 0370 0380 0390 1950 0400 0410 1960 0420 1970
$4,045 $4,045 $4,045 $4,045 $6,459 $6,459 $6,459 $6,459 $6,459 $9,612 $9,612 $9,612 $15,839 $15,839
300 x 3001)8113. 1170 1180 1190 – 1200 1210 1220 1230 – 10302) 10402) – 10502) –
H65 $6,144 $6,144 $6,144 $8,787 $8,787 $8,787 $8,787 $13,594 $13,594 $18,944
600 x 1508113. 0750 0760 0770 2100 0780 0790 0800 0810 2110 0820 0830 2120 0840 2130
$4,697 $4,697 $4,697 $4,697 $7,124 $7,124 $7,124 $7,124 $7,124 $11,166 $11,166 $11,166 $16,550 $16,550
600 x 3001)8113. 1170 1180 1190 – 1200 1210 1220 1230 – 10302) 10402) – 10502) –
H67 $6,144 $6,144 $6,144 $8,787 $8,787 $8,787 $8,787 $13,594 $13,594 $18,944
900 x 3008113. 1170 1180 1190 – 1200 1210 1220 1230 –
$6,144 $6,144 $6,144 $8,787 $8,787 $8,787 $8,787
1500 x 3008113. 1350 1360 1370 – 1380 1390 1400 1410 –
$6,144 $6,144 $6,144 $8,787 $8,787 $8,787 $8,787
1) Flange rating class 300:– in addition to API specification– different center to face dimensions– Article number and design of higher pressure types with additional option code.
2) Delivery time 6 – 8 weeks
106
All prices in $
Typ
e 8
11
High EfficiencyHigh Efficiency
1) For available flange facings refer to page 1232) Dimension "a" 34 mm extended for full nozzle design3) Delivery time 8 weeks
Valve size 1" x 2" 11/2" x 2" 11/2" x 3" 2" x 3"
Standard Orifice acc. to API 526 D E F D E F G H G H J
Extra Orifice G H J K+
POSV complete
NACE sour gas application
acc. to MR0175 R70 $860 $860 $860 $860 $946 $946 $946 $946 $946 $946 $946 $946 $946 $946 $946
acc. to MR0103 R93 $860 $860 $860 $860 $946 $946 $946 $946 $946 $946 $946 $946 $946 $946 $946
Soft sealing POSV complete
O-ring disc,Piston guide, Seat, Tubing,Cover
FKM R044) * * * * * * * * * * * * * * *EPDM R054) $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
FFKM R064) $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585
Explosive Decom-pression conform design
for POSV ≥ CL900
FKM “ED”3)
>51 barR3A4) $206 $206 $206 – $206 $206 $206 – $206 $206 – $275 $275 $275 –
FFKM “ED”3)
>102 barR3B4) $1,204 $1,204 $1,204 – $1,204 $1,204 $1,204 – $1,204 $1,204 – $1,376 $1,376 $1,376 –
Design FKM-cold,-48 °C medium tem-perature
FKM-coldfor ambient temp. up to -48°C R3C $1,290 $1,290 $1,290 $1,290 $1,290 $1,290 $1,290 $1,290 $1,290 $1,290 $1,290 $1,376 $1,376 $1,376 $1,376
FKM-coldfor ambient temp. up to -16°C R3L $447 $447 $447 $447 $447 $447 $447 $447 $447 $447 $447 $516 $516 $516 $516
Main valve
Special machining of flange
RTJ-grooveInlet H62 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $275 $275 $275 $275
Outlet H63 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $275 $275 $275 $275
DIN-Flange facings
Inlet 1) $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $275 $275 $275 $275
Outlet 1) $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $275 $275 $275 $275
Disc4) Metal sealing R71 $138 $138 $138 $138 $138 $138 $138 $138 $172 $172 $172 $241 $241 $241 $241
Drain holeG 1/2 J19 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69
NPT 1/2" R48 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69
PTFE piston seal, spring loaded5) R20 $275 $275 $275 $275 $275 $275 $275 $275 $275 $275 $275 $413 $413 $413 $413
PTFE-Compound piston sealing, spring-loaded
5) PTFE-compound
R66 $275 $275 $275 – $344 $344 $344 – $344 $344 – $413 $413 $413 –
Top plate material 1.4404/316L R46 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Studs / Nuts 1.4401 (A4-70) J89 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Nozzle
> CL600 body 2) R69 $2,065 $2,065 $2,065 – $2,581 $2,581 $2,581 – $2,581 $2,581 – $4,301 $4,301 $4,301 –
RTJ-groove > CL600 body
2) L58 $172 $172 $172 – $172 $172 $172 – $172 $172 – $275 $275 $275 –
Spring for POSVInconel
X750X08 $344 $344 $344 – $344 $344 $344 – $344 $344 – $344 $344 $344 –
Disc stellitedfor POSV ≥ CL900
Stellite 6 R65 $344 $344 $344 – $516 $516 $516 – $516 $516 – $688 $688 $688 –
Disc with inserted sealing plate PEEK
Sealing element R67 +R04
$310 $310 $310 – $310 $310 $310 – $413 $413 – $482 $482 $482 –
for POSV> 30.01 bardepends on tem-perature
FKM
EPDMR67
+R05 $310 $310 $310 – $310 $310 $310 – $413 $413 – $482 $482 $482 –
FFKMR67
+R06 $310 $310 $310 – $310 $310 $310 – $413 $413 – $482 $482 $482 –
Disc with inserted sealing plate PTFE
for POSV Inlet ≤ CL300,≤ 51 bardepends on tem-perature
FKMI39
+R04 $310 $310 $310 $310 $310 $310 $310 $310 $413 $413 $413 $482 $482 $482 $482
EPDMI39
+R05 $310 $310 $310 $310 $310 $310 $310 $310 $413 $413 $413 $482 $482 $482 $482
FFKMI39
+R06 $310 $310 $310 $310 $310 $310 $310 $310 $413 $413 $413 $482 $482 $482 $482
Options Type 811 – Pop Action
4) Depending on the pressure the main valve disc is designed as soft seal or metal disc without additional cost. The metal disc can be selected always as an option with additional cost.
5) Selection depends on pressure and temperature
107
All prices in $
Typ
e 8
11
High EfficiencyHigh Efficiency
1) For available flange facings refer to page 1232) Dimension "a" 34 mm extended for full nozzle design3) Delivery time 8 weeks
4) Depending on the pressure the main valve disc is designed as soft seal or metal disc without additional cost. The metal disc can be selected always as an option with additional cost.
5) Selection depends on pressure and temperature
Valve size 3" x 4" 4" x 6" 6" x 8" 8" x 10"
Standard Orifice acc. to API 526 J K L L M N P Q R T
Extra Orifice N+ P+ R+ T+
POSV complete
NACE sour gas application
acc. to MR0175 R70 $1,032 $1,032 $1,032 $1,032 $1,032 $1,032 $1,032 $1,032 $1,032 $1,032 $1,032 $1,032 $1,118 $1,118
acc. to MR0103 R93 $1,032 $1,032 $1,032 $1,032 $1,032 $1,032 $1,032 $1,032 $1,032 $1,032 $1,032 $1,032 $1,118 $1,118
Soft sealing POSV complete
O-ring disc,Piston guide, Seat, Tubing,Cover
FKM R044) * * * * * * * * * * * * * *EPDM R054) $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
FFKM R064) $723 $723 $723 $723 $946 $946 $946 $946 $946 $1,376 $1,376 $1,376 $1,548 $1,548
Explosive Decom-pression conform design
for POSV ≥ CL900
FKM “ED”3) R3A4) $379 $379 $379 – $516 $516 $516 $516 – – – – – –
FFKM “ED”3) R3B4) $1,548 $1,548 $1,548 – $1,893 $1,893 $1,893 $1,893 – $2,925 $2,925 – $3,269 –
Design FKM-cold,-48 °C medium tem-perature.
FKM-coldfor ambient temp. up to -48°C R3C $1,720 $1,720 $1,720 $1,720 $2,065 $2,065 $2,065 $2,065 $2,065 $2,237 $2,237 $2,237 $2,409 $2,409
FKM-coldfor ambient temp. up to -16°C R3L $551 $551 $551 $551 $688 $688 $688 $688 $688 $757 $757 $757 $826 $826
Main valve
Special machining of flange
RTJ-grooveInlet H62 $275 $275 $275 $275 $275 $275 $275 $275 $275 $516 $516 $516 $516 $516
Outlet H63 $275 $275 $275 $275 $275 $275 $275 $275 $275 $516 $516 $516 $516 $516
DIN-Flange facings
Inlet 1) $275 $275 $275 $275 $275 $275 $275 $275 $275 $516 $516 $516 $516 $516
Outlet 1) $275 $275 $275 $275 $275 $275 $275 $275 $275 $516 $516 $516 $516 $516
Disc4) Metal sealing R71 $344 $344 $344 $344 $860 $860 $860 $860 $860 $1,118 $1,118 $1,118 $1,720 $1,720
Drain holeG 1/2 J19 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69
NPT 1/2" R48 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69
PTFE piston seal, spring loaded5) R20 $413 $413 $413 $413 $413 $413 $413 $413 $413 $860 $860 $860 $860 $860
PTFE-Compound piston sealing, spring-loaded
5) PTFE-compound
R66 $516 $516 $516 – $688 $688 $688 $688 – – – – – –
Top plate material 1.4404/316L R46 $275 $275 $275 $275 $275 $275 $275 $275 $275 $516 $516 $516 $516 $516
Studs / Nuts 1.4401 (A4-70) J89 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Nozzle
> CL600 body 2) R69 $5,161 $5,161 $5,161 – $6,882 $6,882 $6,882 $6,882 – – – – – –
RTJ-groove > CL600 body
2) L58 $275 $275 $275 – $275 $275 $275 $275 – – – – – –
Spring for POSVInconel
X750X08 $344 $344 $344 – $344 $344 $344 $344 – $344 $344 – $344 –
Disc stellitedfor POSV ≥ CL900
Stellite 6 R65 $723 $723 $723 – $826 $826 $826 $826 – – – – – –
Disc with inserted sealing plate PEEK
Sealing element R67 +R04
$585 $585 $585 – $688 $688 $688 $688 – – – – – –
for POSV> 30.01 bardepends on tem-perature
FKM
EPDMR67
+R05 $585 $585 $585 – $688 $688 $688 $688 – $860 $860 – $946 –
FFKMR67
+R06 $585 $585 $585 – $688 $688 $688 $688 – $860 $860 – $946 –
Disc with inserted sealing plate PTFE
ffor POSV Inlet ≤ CL300,≤ 51 bardepends on tem-perature
FKMI39
+R04 $585 $585 $585 $585 $688 $688 $688 $688 $688 $860 $860 $860 $946 $946
EPDMI39
+R05 $585 $585 $585 $585 $688 $688 $688 $688 $688 $860 $860 $860 $946 $946
FFKMI39
+R06 $585 $585 $585 $585 $688 $688 $688 $688 $688 $860 $860 $860 $946 $946
Options Type 811 – Pop Action
108
All prices in $
Typ
e 8
11
High EfficiencyHigh Efficiency
1) Blowdown adjusted: Closing pressure difference as a fixed value between 2 – 15%. Standard adjustment between 3 – 7%.
Valve size 1" x 2" 11/2" x 2" 11/2" x 3" 2" x 3"
Standard Orifice acc. to API 526 D E F D E F G H G H J
Extra Orifice G H J K+
Pilot (Pop Action)
Blowdown adjusted to x%1) R44 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Pilot test gag R33 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172
Pilot lifting device R25 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551
Tag (foil/paper) R94 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Stainless steel tag R95 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28
Accessories
Backflow preventer * * * * * * * * * * * * * * *Field test connection R26 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241
Pilot supply filter R30 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757
Manual blowdown
to atmosphere R27 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241
into main valve outlet
R24 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585
Remote sensing R28 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Swagelok Connection R23 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Needle valvefor field test connection
R4A $688 $688 $688 $688 $688 $688 $688 $688 $688 $688 – $688 $688 $688 $688
Options Type 811 – Pop Action
109
All prices in $
Typ
e 8
11
High EfficiencyHigh Efficiency
1) Blowdown adjusted: Closing pressure difference as a fixed value between 2 – 15%. Standard adjustment between 3 – 7%.
Valve size 3" x 4" 4" x 6" 6" x 8" 8" x 10"
Standard Orifice acc. to API 526 J K L L M N P Q R T
Extra Orifice N+ P+ R+ T+
Pilot (Pop Action)
Blowdown adjusted to x%1) R44 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Pilot test gag R33 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172
Pilot lifting device R25 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551
Tag (foil/paper) R94 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Stainless steel tag R95 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28
Accessories
Backflow preventer * * * * * * * * * * * * * *Field test connection R26 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $344 $241 $241 $241
Pilot supply filter R30 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757
Manual blowdown
to atmosphere R27 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $344 $241 $241 $241
into main valve outlet
R24 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585
Remote sensing R28 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Swagelok Connection R23 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Needle valvefor field test connection
R4A $688 $688 $688 $688 $688 $688 $688 $688 $688 $688 $688 $688 $688 $688
Options Type 811 – Pop Action
110
All Prices in $
Available fl ange ratings and fl ange facings
on page 122 and 123
Typ
e 8
21
High EfficiencyHigh Efficiency
Type 821 WCB 1.0619 Modulate Action
Valve size 1" x 2" 11/2" x 2" 11/2" x 3" 2" x 3"
Standard Orifice acc. to API 526
D E F D E F G H G H J
Extra Orifice G H J K+
Body material: WCB 1.0619
Flange class Art. No.
150 x 1508212. 0010 0020 0030 1820 0040 0050 0060 1830 0070 0080 1840 0090 0100 0110 1850
$2,967 $2,967 $2,967 $2,967 $2,967 $2,967 $2,967 $2,967 $3,227 $3,227 $3,227 $3,571 $3,571 $3,571 $3,571
300 x 1508212. 0220 0230 0240 1900 0250 0260 0270 1910 0280 0290 1920 0300 0310 0320 1930
$2,967 $2,967 $2,967 $2,967 $2,967 $2,967 $2,967 $2,967 $3,227 $3,227 $3,227 $3,571 $3,571 $3,571 $3,571
300 x 3001)8212. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
H65 $5,028 $5,028 $5,028 $5,362 $5,362 $5,362 $5,531 $5,531 $5,921 $5,921 $5,921
600 x 1508212. 0640 0650 0660 2060 0670 0680 0690 2070 0700 0710 2080 0720 0730 0740 2090
$3,019 $3,019 $3,019 $3,019 $3,097 $3,097 $3,097 $3,097 $3,414 $3,414 $3,414 $4,191 $4,191 $4,191 $4,191
600 x 3001)8212. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
H67 $5,028 $5,028 $5,028 $5,362 $5,362 $5,362 $5,531 $5,531 $5,921 $5,921 $5,921
900 x 3008212. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
$5,028 $5,028 $5,028 $5,362 $5,362 $5,362 $5,531 $5,531 $5,921 $5,921 $5,921
1500 x 3008212. 1240 1250 1260 – 1270 1280 1290 – 1300 1310 – 1320 1330 1340 –-
$5,028 $5,028 $5,028 $5,362 $5,362 $5,362 $5,531 $5,531 $5,921 $5,921 $5,921
1500 x 6001)8212. – – – – 1630 1640 1650 – – – – 1680 1690 1700 –
H69H82 $6,650 $6,650 $6,650 $8,115 $8,115 $8,115
2500 x 3008212. – – – – 1630 1640 1650 – – – – 1680 1690 1700 –
$6,650 $6,650 $6,650 $8,115 $8,115 $8,115
2500 x 6001)8212. – – – – 1630 1640 1650 – – – – 1680 1690 1700 –
H82 $6,650 $6,650 $6,650 $8,115 $8,115 $8,115
1) Flange rating class 300 and 600:– in addition to API specification– different center to face dimensions– Article number and design of higher pressure types with additional option code.
POSV for high pressure
111
All Prices in $
Typ
e 8
21
High EfficiencyHigh Efficiency
Type 821 WCB 1.0619 Modulate Action
Valve size 3" x 4" 4" x 6" 6" x 8" 8" x 10"
Standard Orifice acc. to API 526
J K L L M N P Q R T
Extra Orifice N+ P+ R+ T+
Body material: WCB 1.0619
Flange class Art. No.
150 x 1508212. 0120 0130 0140 1860 0150 0160 0170 0180 1870 0190 0200 1880 0210 1890
$4,571 $4,571 $4,571 $4,571 $6,767 $6,767 $6,767 $6,767 $6,767 $9,631 $9,631 $9,631 $15,295 $15,295
300 x 1508212. 0330 0340 0350 1940 0360 0370 0380 0390 1950 0400 0410 1960 0420 1970
$4,571 $4,571 $4,571 $4,571 $6,767 $6,767 $6,767 $6,767 $6,767 $9,631 $9,631 $9,631 $15,295 $15,295
300 x 3001)8212. 1170 1180 1190 – 1200 1210 1220 1230 – 10302) 10402) – 10502) –
H65 $6,926 $6,926 $6,926 $9,329 $9,329 $9,329 $9,329 $13,223 $13,223 $18,118
600 x 1508212. 0750 0760 0770 2100 0780 0790 0800 0810 2110 0820 0830 2120 0840 2130
$5,165 $5,165 $5,165 $5,165 $7,371 $7,371 $7,371 $7,371 $7,371 $11,044 $11,044 $11,044 $15,938 $15,938
600 x 3001)8212. 1170 1180 1190 – 1200 1210 1220 1230 – 10302) 10402) – 10502) –
H67 $6,926 $6,926 $6,926 $9,329 $9,329 $9,329 $9,329 $13,223 $13,223 $18,118
900 x 3008212. 1170 1180 1190 – 1200 1210 1220 1230 –
$6,926 $6,926 $6,926 $9,329 $9,329 $9,329 $9,329
1500 x 3008212. 1350 1360 1370 – 1380 1390 1400 1410 –
$6,926 $6,926 $6,926 $9,329 $9,329 $9,329 $9,329
1500 x 6001)8212. 1530 1540 1550 – 1560 1570 1580 1590 –
H69H82 $10,896 $10,896 $10,896 $13,211 $13,211 $13,211 $13,211
1) Flange rating class 300 and 600:– in addition to API specification– different center to face dimensions– Article number and design of higher pressure types with additional option code.
2) Delivery time 6 – 8 weeks
112
All Prices in $
Available fl ange ratings and fl ange facings
on page 122 and 123
Typ
e 8
21
High EfficiencyHigh Efficiency
POSV for high pressure
Type 821 CF8M 1.4408 Modulate Action
Valve size 1" x 2" 11/2" x 2" 11/2" x 3" 2" x 3"
Standard Orifice acc. to API 526
D E F D E F G H G H J
Extra Orifice G H J K+
Body material: CF8M 1.4408
Flange class Art. No.
150 x 1508214. 0010 0020 0030 1820 0040 0050 0060 1830 0070 0080 1840 0090 0100 0110 1850
$5,067 $5,067 $5,067 $5,067 $5,424 $5,424 $5,424 $5,424 $5,663 $5,663 $5,663 $5,901 $5,901 $5,901 $5,901
300 x 1508214. 0220 0230 0240 1900 0250 0260 0270 1910 0280 0290 1920 0300 0310 0320 1930
$5,067 $5,067 $5,067 $5,067 $5,663 $5,663 $5,663 $5,663 $5,663 $5,663 $5,663 $5,901 $5,901 $5,901 $5,901
300 x 3001)8214. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
H65 $8,156 $8,156 $8,156 $8,659 $8,659 $8,659 $8,993 $8,993 $9,384 $9,384 $9,384
600 x 1508214. 0640 0650 0660 2060 0670 0680 0690 2070 0700 0710 2080 0720 0730 0740 2090
$5,424 $5,424 $5,424 $5,424 $6,044 $6,044 $6,044 $6,044 $6,044 $6,044 $6,044 $6,258 $6,258 $6,258 $6,258
600 x 3001)8214. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
H67 $8,156 $8,156 $8,156 $8,659 $8,659 $8,659 $8,993 $8,993 $9,384 $9,384 $9,384
900 x 3008214. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
$8,156 $8,156 $8,156 $8,659 $8,659 $8,659 $8,993 $8,993 $9,384 $9,384 $9,384
1500 x 3008214. 1240 1250 1260 – 1270 1280 1290 – 1300 1310 – 1320 1330 1340 –
$8,156 $8,156 $8,156 $8,659 $8,659 $8,659 $8,993 $8,993 $9,384 $9,384 $9,384
1500 x 6001)8214. – – – – 1630 1640 1650 – – – – 1680 1690 1700 –
H69H82 $10,934 $10,934 $10,934 $12,292 $12,292 $12,292
2500 x 3008214. – – – – 1630 1640 1650 – – – – 1680 1690 1700 –
$10,934 $10,934 $10,934 $12,292 $12,292 $12,292
2500 x 6001)8214. – – – – 1630 1640 1650 – – – – 1680 1690 1700 –
H82 $10,934 $10,934 $10,934 $12,292 $12,292 $12,292
1) Flange rating class 300 and 600:– in addition to API specification– different center to face dimensions– Article number and design of higher pressure types with additional option code.
113
All Prices in $
Typ
e 8
21
High EfficiencyHigh Efficiency
Type 821 CF8M 1.4408 Modulate Action
Valve size 3" x 4" 4" x 6" 6" x 8" 8" x 10"
Standard Orifice acc. to API 526
J K L L M N P Q R T
Extra Orifice N+ P+ R+ T+
Body material: CF8M 1.4408
Flange class Art. No.
150 x 1508214. 0120 0130 0140 1860 0150 0160 0170 0180 1870 0190 0200 1880 0210 1890
$7,511 $7,511 $7,511 $7,511 $10,610 $10,610 $10,610 $10,610 $10,610 $15,199 $15,199 $15,199 $20,922 $20,922
300 x 1508214. 0330 0340 0350 1940 0360 0370 0380 0390 1950 0400 0410 1960 0420 1970
$7,511 $7,511 $7,511 $7,511 $10,610 $10,610 $10,610 $10,610 $10,610 $15,199 $15,199 $15,199 $20,922 $20,922
300 x 3001)8214. 1170 1180 1190 – 1200 1210 1220 1230 – 10302) 10402) – 10502) –
H65 $10,111 $10,111 $10,111 $13,853 $13,853 $13,853 $13,853 $19,744 $19,744 $25,943
600 x 1508214. 0750 0760 0770 2100 0780 0790 0800 0810 2110 0820 0830 2120 0840 2130
$8,167 $8,167 $8,167 $8,167 $11,146 $11,146 $11,146 $11,146 $11,146 $16,392 $16,392 $16,392 $22,591 $22,591
600 x 3001)8214. 1170 1180 1190 – 1200 1210 1220 1230 – 10302) 10402) – 10502) –
H67 $10,111 $10,111 $10,111 $13,853 $13,853 $13,853 $13,853 $19,744 $19,744 $25,943
900 x 3008214. 1170 1180 1190 – 1200 1210 1220 1230 –
$10,111 $10,111 $10,111 $13,853 $13,853 $13,853 $13,853
1500 x 3008214. 1350 1360 1370 – 1380 1390 1400 1410 –
$10,111 $10,111 $10,111 $13,853 $13,853 $13,853 $13,853
1500 x 6001)8214. 1530 1540 1550 – 1560 1570 1580 1590 –
H69H82 $16,906 $16,906 $16,906 $19,993 $19,993 $19,993 $19,993
1) Flange rating class 300 and 600:– in addition to API specification– different center to face dimensions– Article number and design of higher pressure types with additional option code.
2) Delivery time 6 – 8 weeks
114
All Prices in $
Available fl ange ratings and fl ange facings
on page 122 and 123
Typ
e 8
21
High EfficiencyHigh Efficiency
POSV for high pressure
Type 821 LCB Modulate Action
Valve size 1" x 2" 11/2" x 2" 11/2" x 3" 2" x 3"
Standard Orifice acc. to API 526
D E F D E F G H G H J
Extra Orifice G H J K+
Body material: LCB
Flange class Art. No.
150 x 1508213. 0010 0020 0030 1820 0040 0050 0060 1830 0070 0080 1840 0090 0100 0110 1850
$3,263 $3,263 $3,263 $3,263 $3,263 $3,263 $3,263 $3,263 $3,550 $3,550 $3,550 $3,929 $3,929 $3,929 $3,929
300 x 1508213. 0220 0230 0240 1900 0250 0260 0270 1910 0280 0290 1920 0300 0310 0320 1930
$3,263 $3,263 $3,263 $3,263 $3,263 $3,263 $3,263 $3,263 $3,550 $3,550 $3,550 $3,929 $3,929 $3,929 $3,929
300 x 3001)8213. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
H65 $5,936 $5,936 $5,936 $6,342 $6,342 $6,342 $6,544 $6,544 $7,017 $7,017 $7,017
600 x 1508213. 0640 0650 0660 2060 0670 0680 0690 2070 0700 0710 2080 0720 0730 0740 2090
$3,323 $3,323 $3,323 $3,323 $3,408 $3,408 $3,408 $3,408 $3,756 $3,756 $3,756 $4,610 $4,610 $4,610 $4,610
600 x 3001)8213. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
H67 $5,936 $5,936 $5,936 $6,342 $6,342 $6,342 $6,544 $6,544 $7,017 $7,017 $7,017
900 x 3008213. 1060 1070 1080 – 1090 1100 1110 – 1120 1130 – 1140 1150 1160 –
$5,936 $5,936 $5,936 $6,342 $6,342 $6,342 $6,544 $6,544 $7,017 $7,017 $7,017
1500 x 3008213. 1240 1250 1260 – 1270 1280 1290 – 1300 1310 – 1320 1330 1340 –
$5,936 $5,936 $5,936 $6,342 $6,342 $6,342 $6,544 $6,544 $7,017 $7,017 $7,017
1500 x 6001)8213. – – – – 1630 1640 1650 – – – – 1680 1690 1700 –
H69H82 $7,868 $7,868 $7,868 $9,639 $9,639 $9,639
2500 x 3008213. – – – – 1630 1640 1650 – – – – 1680 1690 1700 –
$7,868 $7,868 $7,868 $9,639 $9,639 $9,639
2500 x 6001)8213. – – – – 1630 1640 1650 – – – – 1680 1690 1700 –
H82 $7,868 $7,868 $7,868 $9,639 $9,639 $9,639
1) Flange rating class 300 and 600:– in addition to API specification– different center to face dimensions– Article number and design of higher pressure types with additional option code.
115
All Prices in $
Typ
e 8
21
High EfficiencyHigh Efficiency
Type 821 LCB Modulate Action
Valve size 3" x 4" 4" x 6" 6" x 8" 8" x 10"
Standard Orifice acc. to API 526
J K L L M N P Q R T
Extra Orifice N+ P+ R+ T+
Body material: LCB
Flange class Art. No.
150 x 1508213. 0120 0130 0140 1860 0150 0160 0170 0180 1870 0190 0200 1880 0210 1890
$5,029 $5,029 $5,029 $5,029 $7,444 $7,444 $7,444 $7,444 $7,444 $10,596 $10,596 $10,596 $16,824 $16,824
300 x 1508213. 0330 0340 0350 1940 0360 0370 0380 0390 1950 0400 0410 1960 0420 1970
$5,029 $5,029 $5,029 $5,029 $7,444 $7,444 $7,444 $7,444 $7,444 $10,596 $10,596 $10,596 $16,824 $16,824
300 x 3001)8213. 1170 1180 1190 – 1200 1210 1220 1230 – 10302) 10402) – 10502) –
H65 $8,234 $8,234 $8,234 $11,141 $11,141 $11,141 $11,141 $14,545 $14,545 $19,929
600 x 1508213. 0750 0760 0770 2100 0780 0790 0800 0810 2110 0820 0830 2120 0840 2130
$5,682 $5,682 $5,682 $5,682 $8,107 $8,107 $8,107 $8,107 $8,107 $12,149 $12,149 $12,149 $17,533 $17,533
600 x 3001)8213. 1170 1180 1190 – 1200 1210 1220 1230 – 10302) 10402) – 10502) –
H67 $8,234 $8,234 $8,234 $11,141 $11,141 $11,141 $11,141 $14,545 $14,545 $19,929
900 x 3008213. 1170 1180 1190 – 1200 1210 1220 1230 –
$8,234 $8,234 $8,234 $11,141 $11,141 $11,141 $11,141
1500 x 3008213. 1350 1360 1370 – 1380 1390 1400 1410 –
$8,234 $8,234 $8,234 $11,141 $11,141 $11,141 $11,141
1500 x 6001)8213. 1530 1540 1550 – 1560 1570 1580 1590 –
$13,087 $13,087 $13,087 $15,402 $15,402 $15,402 $15,402
1) Flange rating class 300 and 600:– in addition to API specification– different center to face dimensions– Article number and design of higher pressure types with additional option code.
2) Delivery time 6 – 8 weeks
116
All Prices in $
Typ
e 8
21
High EfficiencyHigh Efficiency
1) For available flange facings refer to page 1232) Dimension "a" 34 mm extended for full nozzle design3) Delivery time 8 weeks
4) Depending on the pressure the main valve disc is designed as soft seal or metal disc without additional cost. The metal disc can be selected always as an option with additional cost.
5) For flange ratings CL1500 x 600 and CL2500 x 6006) Selection depends on pressure and temperature
Valve size 1" x 2" 1 1/2" x 2" 1 1/2" x 3" 2" x 3"
Standard Orifice acc. to API 526 D E F D E F G H G H J
Extra Orifice G H J K+
POSV complete
NACE sour gas application
acc. to MR0175 R70 $860 $860 $860 $860 $946 $946 $946 $946 $946 $946 $946 $946 $946 $946 $946
acc. to MR0103 R93 $860 $860 $860 $860 $946 $946 $946 $946 $946 $946 $946 $946 $946 $946 $946
Soft sealing POSV complete
O-ring disc,Piston guide, Seat, Tubing,Cover
FKM R044) * * * * * * * * * * * * * * *EPDM R054) $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
FFKM R064) $1,376 $1,376 $1,376 $1,376 $1,376 $1,376 $1,376 $1,376 $1,376 $1,376 $1,376 $1,548 $1,548 $1,548 $1,548
Explosive Decom-pression conform design
for POSV ≥ CL900
FKM “ED”3)
>51 barR3A4) $275 $275 $275 – $275 $275 $275 – $275 $275 – $379 $379 $379 –
FFKM “ED”3)
>102 barR3B4) $1,893 $1,893 $1,893 – $2,065 $2,065 $2,065 $2,065 $2,065 $2,065 – $2,237 $2,237 $2,237 –
Design FKM-cold,-48 °C medium tem-perature
FKM-coldfor ambient temp. up to -48°C R3C $1,634 $1,634 $1,634 $1,634 $1,634 $1,634 $1,634 $1,634 $1,634 $1,634 $1,634 $1,720 $1,720 $1,720 $1,720
FKM-coldfor ambient temp. up to -16°C R3L $723 $723 $723 $723 $723 $723 $723 $723 $723 $723 $723 $791 $791 $791 $791
Main valve
Special machining of flange
RTJ-grooveInlet H62 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $275 $275 $275 $275
Outlet H63 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $275 $275 $275 $275
DIN-Flange facings
Inlet 1) $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $275 $275 $275 $275
Outlet 1) $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $275 $275 $275 $275
CL6005) Outlet – – – – $2,753 $2,753 $2,753 – – – – $3,097 $3,097 $3,097 –
Disc4) Metal sealing R71 $138 $138 $138 $138 $138 $138 $138 $138 $172 $172 $172 $241 $241 $241 $241
Drain holeG 1/2 J19 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69
NPT 1/2" R48 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69
PTFE piston seal, spring loaded6) R20 $275 $275 $275 $275 $275 $275 $275 $275 $275 $275 $275 $413 $413 $413 $413
PTFE-Compound piston sealing, spring-loaded
6) PTFE-compound
R66 $275 $275 $275 – $344 $344 $344 – $344 $344 – $413 $413 $413 –
Top plate material 1.4404/316L R46 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Studs / Nuts 1.4401 (A4-70) J89 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Nozzle
> CL600 body 2) R69 $2,065 $2,065 $2,065 – $2,581 $2,581 $2,581 – $2,581 $2,581 – $4,301 $4,301 $4,301 –
RTJ-Nut > CL600 body
2) L58 $172 $172 $172 – $172 $172 $172 – $172 $172 – $172 $172 $172 –
Spring for POSVInconel
X750X08 $344 $344 $344 – $344 $344 $344 – $344 $344 – $344 $344 $344 –
Disc stellitedfor POSV ≥ CL900
Stellite 6 R65 $344 $344 $344 – $516 $516 $516 – $516 $516 – $688 $688 $688 –
Disc with inserted sealing plate PEEK
Sealing element R67 +R04
$310 $310 $310 – $310 $310 $310 – $413 $413 – $482 $482 $482 –for POSV> 30.01 bardepends on temperature
FKM
EPDMR67
+R05 $310 $310 $310 – $310 $310 $310 – $413 $413 – $482 $482 $482 –
FFKMR67
+R06 $310 $310 $310 – $310 $310 $310 – $413 $413 – $482 $482 $482 –
Disc with inserted sealing plate PTFE
for POSV Inlet ≤ CL300,≤ 51 bardepends on tem-perature
FKMI39
+R04 $310 $310 $310 $310 $310 $310 $310 $310 $413 $413 $413 $482 $482 $482 $482
EPDMI39
+R05 $310 $310 $310 $310 $310 $310 $310 $310 $413 $413 $413 $482 $482 $482 $482
FFKMI39
+R06 $310 $310 $310 $310 $310 $310 $310 $310 $413 $413 $413 $482 $482 $482 $482
Options Type 821 – Modulate Action
117
All Prices in $
Typ
e 8
21
High EfficiencyHigh Efficiency
1) For available flange facings refer to page 1232) Dimension "a" 34 mm extended for full nozzle design3) Delivery time 8 weeks
4) Depending on the pressure the main valve disc is designed as soft seal or metal disc without additional cost. The metal disc can be selected always as an option with additional cost.
5) Selection depends on pressure and temperature
Valve size 3" x 4" 4" x 6" 6" x 8" 8" x 10"
Standard Orifice acc. to API 526 J K L L M N P Q R T
Extra Orifice N+ P+ R+ T+
POSV complete
NACE sour gas application
acc. to MR0175 R70 $946 $946 $946 $946 $946 $946 $946 $946 $946 $1,032 $1,032 $1,032 $1,118 $1,118
acc. to MR0103 R93 $946 $946 $946 $946 $946 $946 $946 $946 $946 $1,032 $1,032 $1,032 $1,118 $1,118
Soft sealing POSV complete
O-ring disc,Piston guide, Seat, Tubing,Cover
FKM R044) * * * * * * * * * * * * * *EPDM R054) $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
FFKM R064) $1,720 $1,720 $1,720 $1,720 $2,065 $2,065 $2,065 $2,065 $2,065 $2,581 $2,581 $2,581 $2,925 $2,925
Explosive Decom-pression conform design
for POSV ≥ CL900
FKM “ED”3)
>51 barR3A4) $516 $516 $516 – $619 $619 $619 $619 – – – – – –
FFKM “ED”3)
>102 barR3B4) $2,581 $2,581 $2,581 – $2,925 $2,925 $2,925 $2,925 – $3,785 $3,785 – $4,129 –
Design FKM-cold,-48 °C medium tem-perature
FKM-coldfor ambient temp. up to -48°C R3C $2,065 $2,065 $2,065 $2,065 $2,237 $2,237 $2,237 $2,237 $2,237 $2,409 $2,409 $2,409 $2,581 $2,581
FKM-coldfor ambient temp. up to -16°C R3L $826 $826 $826 $826 $946 $946 $946 $946 $946 $1,032 $1,032 $1,032 $1,118 $1,118
Main valve
Special machining of flange
RTJ-grooveInlet H62 $275 $275 $275 $275 $275 $275 $275 $275 $275 $516 $516 $516 $516 $516
Outlet H63 $275 $275 $275 $275 $275 $275 $275 $275 $275 $516 $516 $516 $516 $516
DIN-Flange facings
Inlet 1) $275 $275 $275 $275 $275 $275 $275 $275 $275 $516 $516 $516 $516 $516
Outlet 1) $275 $275 $275 $275 $275 $275 $275 $275 $275 $516 $516 $516 $516 $516
Disc4) Metal sealing R71 $344 $344 $344 $344 $860 $860 $860 $860 $860 $1,118 $1,118 $1,118 $1,720 $1,720
Drain holeG 1/2 J19 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69
NPT 1/2" R48 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69 $69
PTFE piston seal, spring loaded5) R20 $413 $413 $413 $413 $413 $413 $413 $413 $413 $860 $860 $860 $860 $860
PTFE-Compound piston sealing, spring-loaded
5) PTFE-compound
R66 $516 $516 $516 – $688 $688 $688 $688 – – – – – –
Top plate material 1.4404/316L R46 $275 $275 $275 $275 $275 $275 $275 $275 $275 $516 $516 $516 $516 $516
Studs / Nuts 1.4401 (A4-70) J89 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Nozzle
> CL600 body 2) R69 $5,161 $5,161 $5,161 – $6,882 $6,882 $6,882 $6,882 – – – – – –
RTJ-Nut > CL600 body
2) L58 $275 $275 $275 – $275 $275 $275 $275 – – – – – –
Spring for POSVInconel
X750X08 $344 $344 $344 – $344 $344 $344 $344 – $344 $344 – $344 –
Disc stellitedfor POSV ≥ CL900
Stellite 6 R65 $723 $723 $723 – $826 $826 $826 $826 – – – – – –
Disc with inserted sealing plate PEEK
Sealing element R67 +R04
$585 $585 $585 – $688 $688 $688 $688 – – – – – –for POSV> 30.01 bardepends on tem-perature
FKM
EPDMR67
+R05 $585 $585 $585 – $688 $688 $688 $688 – $860 $860 – $946 –
FFKMR67
+R06 $585 $585 $585 – $688 $688 $688 $688 – $860 $860 – $946 –
Disc with inserted sealing plate PTFE
for POSV Inlet ≤ CL300,≤ 51 bardepends on tem-perature
FKMI39
+R04 $585 $585 $585 $585 $688 $688 $688 $688 $688 $860 $860 $860 $946 $946
EPDMI39
+R05 $585 $585 $585 $585 $688 $688 $688 $688 $688 $860 $860 $860 $946 $946
FFKMI39
+R06 $585 $585 $585 $585 $688 $688 $688 $688 $688 $860 $860 $860 $946 $946
Options Type 821 – Modulate Action
118
All Prices in $
Typ
e 8
21
High EfficiencyHigh Efficiency
Valve size 1" x 2" 1 1/2" x 2" 1 1/2" x 3" 2" x 3"
Standard Orifice acc. to API 526 D E F D E F G H G H J
Extra Orifice G H J K+
Pilot (Modulate Action)
Pilot test gag R33 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172
Pilot lifting device R25 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551
Pilot lifting device manuelly operated with test gag
R22 $275 $275 $275 $275 $275 $275 $275 $275 $275 $275 $275 $275 $275 $275 $275
Tag (foil/paper) R94 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Stainless steel tag R95 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28
Accessories
Backflow preventer * * * * * * * * * * * * * * *Field test connection R26 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241
Pilot supply filter R30 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757
Manual blowdown
to atmosphere R27 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241
into main valve outlet
R24 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585
Remote sensing R28 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Swagelok Connection R23 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Needle valvefor field test con-nection
R4A $688 $688 $688 $688 $688 $688 $688 $688 $688 $688 – $688 $688 $688 $688
Options Type 821 – Modulate Action
119
All Prices in $
Typ
e 8
21
High EfficiencyHigh Efficiency
Valve size 3" x 4" 4" x 6" 6" x 8" 8" x 10"
Standard Orifice acc. to API 526 J K L L M N P Q R T
Extra Orifice N+ P+ R+ T+
Pilot (Modulate Action)
Pilot test gag R33 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172
Pilot lifting device R25 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551 $551
Pilot lifting device manuelly operated with test gag
R22 $275 $275 $275 $275 $275 $275 $275 $275 $275 $275 $275 $275 $275 $275
Tag (foil/paper) R94 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Stainless steel tag R95 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28
Accessories
Backflow preventer * * * * * * * * * * * * * *Field test connection R26 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $344 $241 $241 $241
Pilot supply filter R30 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757 $757
Manual blowdown
to atmosphere R27 $241 $241 $241 $241 $241 $241 $241 $241 $241 $241 $344 $241 $241 $241
into main valve outlet
R24 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585 $585
Remote sensing R28 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Swagelok Connection R23 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
Needle valvefor field test con-nection
R4A $688 $688 $688 $688 $688 $688 $688 $688 $688 $688 $688 $688 $688 $688
Options Type 821 – Modulate Action
120
We
igh
ts
High EfficiencyHigh EfficiencyWeights – Semi nozzle
US units
Valve size 1" x 2" 1 1/2" x 2" 1 1/2" x 3" 2" x 3"
Standard Orifice acc. to API 526
D E F D E F G H G H J
Extra Orifice G H J K+
Weight m [lb]
Flange class
150 x 150 49.6 49.6 49.6 49.6 59.5 59.5 59.5 59.5 68.4 68.4 68.4 81.6 81.6 81.6 81.6
300 x 150 43.0 43.0 43.0 43.0 52.9 52.9 52.9 52.9 61.7 61.7 61.7 75.0 75.0 75.0 75.0
300 x 300 55.1 55.1 55.1 – 70.6 70.6 70.6 – 81.6 81.6 – 119.1 119.1 119.1 –
600 x 150 49.6 49.6 49.6 49.6 59.5 59.5 59.5 59.5 68.4 68.4 68.4 81.6 81.6 81.6 81.6
600 x 300 55.1 55.1 55.1 – 70.6 70.6 70.6 – 81.6 81.6 – 119.1 119.1 119.1 –
900 x 300 55.1 55.1 55.1 – 70.6 70.6 70.6 – 81.6 81.6 – 119.1 119.1 119.1 –
1500 x 300 55.1 55.1 55.1 – 70.6 70.6 70.6 – 81.6 81.6 – 119.1 119.1 119.1 –
1500 x 600 – – – – 108.0 108.0 108.0 – – – – 152.1 152.1 152.1 –
2500 x 300 – – – – 108.0 108.0 108.0 – – – – 152.1 152.1 152.1 –
2500 x 600 – – – – 108.0 108.0 108.0 – – – – 152.1 152.1 152.1 –
121
We
igh
ts
High EfficiencyHigh Efficiency
US units
Valve size 3" x 4" 4" x 6" 6" x 8" 8" x 10"
Standard Orifice acc. to API 526
J K L L M N P Q R T
Extra Orifice N+ P+ R+ T+
Weight m [lb]
Flange class
150 x 150 130.1 130.1 130.1 130.1 196.2 196.2 196.2 196.2 196.2 430.0 430.0 430.0 579.9 579.9
300 x 150 130.1 130.1 130.1 130.1 196.2 196.2 196.2 196.2 196.2 430.0 430.0 430.0 579.9 579.9
300 x 300 196.2 196.2 196.2 – 291.1 291.1 291.1 291.1 – 423.4 423.4 423.4 617.4 617.4
600 x 150 130.1 130.1 130.1 130.1 196.2 196.2 196.2 196.2 196.2 430.0 430.0 430.0 579.9 579.9
600 x 300 196.2 196.2 196.2 – 291.1 291.1 291.1 291.1 – 423.4 423.4 423.4 617.4 617.4
900 x 300 196.2 196.2 196.2 – 291.1 291.1 291.1 291.1 –
1500 x 300 196.2 196.2 196.2 – 291.1 291.1 291.1 291.1 –
1500 x 600 196.2 196.2 196.2 – 291.1 291.1 291.1 291.1 –
Weights – Semi nozzle
122
Fla
ng
es
High EfficiencyHigh EfficiencyFlange drillings
Standard Orifice J K L L M N P Q R T
Extra Orifice N+ P+ R+ T+
Valve size DN 80 x 100 100 x 150 150 x 200 200 x 250
Inlet Outlet
Art. No.Flange
rating class
Option
code
Flange
rating class
Option
code
PN 10 H44 PN 10 H50
8112.
8212.
8114.
8214.
8113.
8213.
0120 0130 0140 1860 0150 0160 0170 0180 1870 0190 0200 1880 0210 1890
PN 16 H45 PN 16 H51 0120 0130 0140 1860 0150 0160 0170 0180 1870 0190 0200 1880 0210 1890
PN 25 H46PN 10 H50 0330 0340 0350 1940 0360 0370 0380 0390 1950 0400 0410 1960 0420 1970
PN 16 H51 0330 0340 0350 1940 0360 0370 0380 0390 1950 0400 0410 1960 0420 1970
PN 40 H47
PN 10 H50 0330 0340 0350 1940 0360 0370 0380 0390 1950 0400 0410 1960 0420 1970
PN 16 H51 0330 0340 0350 1940 0360 0370 0380 0390 1950 0400 0410 1960 0420 1970
PN 25 H52 – – – – – – – – – – – – 0420 1970
PN 40 H15 – – – – – – – – – – – – 1050 –
PN 63 H10
PN 10 H50 0750 0760 0770 2100 0780 0790 0800 0810 2110 0820 0830 2120 0840 2130
PN 16 H51 0750 0760 0770 2100 0780 0790 0800 0810 2110 0820 0830 2120 0840 2130
PN 25 H52 1170 1180 1190 – 1200 1210 1220 1230 – 1030 1040 – 0840 2130
PN 40 H15 1170 1180 1190 – 1200 1210 1220 1230 – 1030 1040 – 1050 –
PN 63 H16 1170 1180 1190 – – – – – – – – – – –
PN 100 H17PN 25 H52 1170 1180 1190 – 1200 1210 1220 1230 – 1030 1040 – – –
PN 40 H15 1170 1180 1190 – 1200 1210 1220 1230 – 1030 1040 – – –
PN 63 H16 1170 1180 1190 – 1560 1570 1580 1590 – – – – – –
PN 160 H11PN 40 H15 1170 1180 1190 – 1200 1210 1220 1230 – – – – – –
PN 63 H16 1170 1180 1190 – 1560 1570 1580 1590 – – – – – –
PN 250 H12PN 40 H15 1350 1350 1370 – 1380 1390 1400 1410 – – – – – –
PN 63 H16 1350 1350 1370 – 1560 1570 1580 1590 – – – – – –
Standard Orifice D E F D E F G H G H JExtra Orifice G H J K+
Valve size DN 25 x 50 40 x 50 40 x 80 50 x 80
Inlet Outlet
Art. No.Flange
rating class
Option
code
Flange
rating class
Option
code
PN 10 H44 PN 10 H50
8112.
8212.
8114.
8214.
8113.
8213.
0220 0230 0240 1900 0040 0050 0060 1830 0070 0080 1840 0090 0100 0110 1850
PN 16 H45 PN 16 H51 0220 0230 0240 1900 0040 0050 0060 1830 0070 0080 1840 0090 0100 0110 1850
PN 25 H46PN 10 H50 0220 0230 0240 1900 0250 0260 0270 1910 0280 0290 1920 0300 0310 0320 1930
PN 16 H51 0220 0230 0240 1900 0250 0260 0270 1910 0280 0290 1920 0300 0310 0320 1930
PN 40 H47
PN 10 H50 0220 0230 0240 1900 0250 0260 0270 1910 0280 0290 1920 0300 0310 0320 1930
PN 16 H51 0220 0230 0240 1900 0250 0260 0270 1910 0280 0290 1920 0300 0310 0320 1930
PN 25 H52 1060 1070 1080 – 1090 1100 1110 1130 1120 1130 – – – – –
PN 40 H15 1060 1070 1080 – 1090 1100 1110 1130 1120 1130 – – – – –
PN 63 H10
PN 10 H50 – – – – – – – – – – – 0720 0730 0740 2090
PN 16 H51 – – – – – – – – – – – 0720 0730 0740 2090
PN 25 H52 1060 1070 1080 – 1090 1100 1110 1130 1120 1130 – 1140 1150 1160 –
PN 40 H15 1060 1070 1080 – 1090 1100 1110 1130 1120 1130 – 1140 1150 1160 –
PN 100 H17PN 25 H52 1060 1070 1080 – 1090 1100 1110 1130 1120 1130 – 1140 1150 1160 –
PN 40 H15 1060 1070 1080 – 1090 1100 1110 1130 1120 1130 – 1140 1150 1160 –
PN 160 H11PN 40 H15 1060 1070 1080 – 1090 1100 1110 1130 1120 1130 – 1140 1150 1160 –
PN 63 H16 – – – – 1630 1640 1650 – – – – – – – –
PN 250 H12PN 40 H15 1240 1250 1260 – 1270 1280 1290 1310 1300 1310 – 1320 1330 1340 –
PN 63 H16 – – – – 1630 1640 1650 – – – – 1680 1690 1700 –
PN 320 H13PN 40 H15 – – – – 1630 1640 1650 – – – – 1680 1690 1700 –
PN 63 H16 – – – – 1630 1640 1650 – – – – 1680 1690 1700 –
PN 400 H14PN 40 H15 – – – – 1630 1640 1650 – – – – 1680 1680 1700 –
PN 63 H16 – – – – 1630 1640 1650 – – – – 1680 1680 1700 –
Flange drillings acc. to DIN EN 1092-1
123
Flange facings, Inspections, Tests and Certifi cates Note: All prices on this page are net prices in $
Insp
ec
tio
ns,
Te
sts
an
d C
ert
ific
ate
s
High EfficiencyHigh Efficiency
1) Smooth finish is not defined in the effective standards.Definitions as well as signs and symbols please refer to page 16.Note: Flange drillings and facings meet always the requirements of mentioned flange standards.
Flange thickness and outer diameter may vary from flange standard.
Flange facings acc. to ASME B16.5
Smooth Finish1) Serrated Finish RTJ-Nut
Inlet Outlet Inlet OutletInlet Outlet
DN / NPS CL150 CL300 CL600 CL150
Type Inlet Outlet Option code Option code Option code
811, 821 all all L52 L53 * * H62 H63
Inspections, Tests and Certifi cates
Option code Price
DIN EN 10204-3.2: TÜV-Nord
Certificate for test pressureM33 $86
POSV complete:
LESER CGA (Certifi cate for Global Application)
– Inspection certificate 3.1 acc. to DIN EN 10204– Declaration of conformity acc. to PED 97/23/EC
H03 $0
Pilot:
Inspection certificate 3.1 acc. to DIN EN 10204R92 $0
Component Option code Price
Main valve
O-ring (Item 60 + 67) DIN EN 10204-2.2 H2H $34
Body DIN EN 10204-3.1 H01 $0
Disc DIN EN 10204-3.1 L23 $34
Seat / Nozzle DIN EN 10204-3.1 L59 $34
Studs DIN EN 10204-3.1 N07 $34
Nuts DIN EN 10204-3.1 N08 $34
Piston DIN EN 10204-3.1 R75 $34
Cover DIN EN 10204-3.1 R76 $34
Piston Guide DIN EN 10204-3.1 R77 $34
Spring (Item 59) DIN EN 10204-3.1 H2K $34
Pilot
Spring plate DIN EN 10204-2.2 H2F $34
Adjusting screw DIN EN 10204-2.2 H2G $34
Spring DIN EN 10204-3.1 L60 $34
Spindle DIN EN 10204-3.1 N94 $34
Pilot Body DIN EN 10204-3.1 R78 $34
Pilot Bonnet DIN EN 10204-3.1 R79 $34
Manifold DIN EN 10204-3.1 R84 $34
Option
Field test connection DIN EN 10204-3.1 R88 $34
Pilot supply filter DIN EN 10204-3.1 R89 $34
Maximum amount for material certifi cation of other components: $155
Material test certifi cate
124
All prices in $
High EfficiencyHigh EfficiencyM
ain
va
lve
Sp
are
Pa
rts K
its
LESER Original Spare Parts Kits – Main valve
Contents Main valve
Item Component Material Quantity
Lubricant Molykote D 1
Lubricant oil Halocarbon oil 56S 1
6.31), 7.3, 60, 61, 63, 67 O-ring FKM / EPDM / FFKM 6
6.41) Backup ring PTFE 1
6.5 Guide ring PTFE-carbon filler 2
10 Parallel pin 1.4310 / Stainless steel 1
58 Screw 1.4310 / Stainless steel 2
62 Backup ring PTFE 1
Spare Parts Kits
Valve size 1" x 2" 1 1/2" x 2" 1 1/2" x 3" 2" x 3" 3" x 4" 4" x 6" 6" x 8" 8" x 10"
Soft sealing FKM
Art. No. 5012. 1130 1131 1132 1133 1134 1135 1136 1137
$173 $173 $207 $207 $242 $275 $379 $552
Soft sealing EPDM
Art. No. 5012. 1138 1139 1140 1141 1142 1143 1144 1145
$173 $173 $207 $207 $242 $275 $379 $552
Soft sealing FFKM
Art. No. 5012. 1146 1147 1148 1149 1150 1151 1152 1153
$2,064 $2,409 $2,409 $2,753 $4,645 $5,850 $7,914 $9,635 Lip seal (Pos. 6.3, 6.4)1)
Mat. No. 508. 0186.0046 0286.0046 0286.0046 0386.0046 0486.0046 0586.0046 – – $275 $344 $344 $413 $516 $688
The LESER Spare Parts Kits contain all the parts recommended for the regular maintenance of a LESER safety valve
1)For fl ange ratings ≥ CL 900 x 150 in deviation from the O-ring (Item Pos. 6.3) and the backup ring (Item 6.4) lip seals have to be considered. The lip seals must be ordered separately.
125
All prices in $
High EfficiencyHigh Efficiency
Typ
e 8
11
Sp
are
Pa
rts K
its
LESER Original Spare Parts Kits – Type 811 Pop Action
Contents Type 811 – Pop Action
Item Component Material Quantity
Lubricant Molykote D 1
Lubricant oil Halocarbon oil 56S 1
64 Bug screen Plastic 1
15 Plunger 1.4404 / 316L 1
6, 7, 8 O-ring Field test connection FKM / EPDM / FFKM 3
24.4, 24.5, 24.6 O-ring Manifold bloc FKM / EPDM / FFKM 7
30, 31, 32 O-ring FKM / EPDM / FFKM 4
24.8 Gasket 1.4401 / 316 2
35 Gasket PTFE 1
48 Screen 1.4404 / 316L 1
49 Support ring Plastic 1
Spare Parts Kits Type 811 – Pop Action
Valve size 1" x 2" up to 8" x 10"
Orifice D – T
Soft sealing FKM
Art. No.
Pilot 2.5 – 151 bar36 – 2190 psig
5012. 1163
$120
Pilot 151.01 – 256 bar> 2190 – 3705 psig
5012. 11661)
$206
Soft sealing EPDM
Art. No.
Pilot 2.5 – 151 bar36 – 2190 psig
5012. 1164
$120
Pilot 151.01 – 256 bar> 2190 – 3705 psig
5012. 11671)
$206
Soft sealing FFKM
Art. No.
Pilot 2.5 – 151 bar36 – 2190 psig
5012. 1165
$1,290
Pilot 151.01 – 256 bar> 2190 – 3705 psig
5012. 11681)
$1,893
1)About the availability will be informed with a LESER News.
126
All prices in $
High EfficiencyHigh EfficiencyTyp
e 8
21
Sp
are
Pa
rts K
its
LESER Original Spare Parts Kits – Type 821 Modulate Action
Spare Parts Kits Type 821 – Modulate Action
Ventilgröße 1" x 2" up to 8" x 10"
Orifice D – T
Soft sealing FKM
Diaphragm design
2.5 – 30 bar36 – 435 psig
Art. No 5012. 1157
$242
Piston design
30.01 – 102 bar> 435 – 1480 psig
Art. No 5012. 1160
$242
102.01 – 256 bar> 1480 – 3705 psig
Art. No 5012. 1169
$379
256.01 – 426 bar> 3705 – 6170 psig
Art. No 5012. 1220
$413
Soft sealing EPDM
Diaphragm design
2.5 – 30 bar36 – 435 psig
Art. No 5012. 1158
$242
Piston design
30.01 – 102 bar> 435 – 1480 psig
Art. No 5012. 1161
$242
102.01 – 256 bar> 1480 – 3705 psig
Art. No 5012. 1170
$946
Soft sealing FFKM
Diaphragm design
2.5 – 30 bar36 – 435 psig
Art. No 5012. 1159
$1,720
Piston design
30.01 – 102 bar> 435 – 1480 psig
Art. No 5012. 1162
$1,892
102.01 – 256 bar> 1480 – 3705 psig
Art. No 5012. 1171
$2,753
Contents Type 821 – Modulate Action
Diaphragm design Piston design
Item Component Material Quantity Quantity
Lubricant Molykote D 1 1Lubricant oil Halocarbon Öl 56S 1 1
64 Bug screen Plastic 1 1
6, 7, 8O-ring
Field test connectionFKM / EPDM / FFKM 3 3
24.4, 24.5, 24.6 O-ring Manifold bloc FKM / EPDM / FFKM 7 724.8 Gasket 1.4401 2 2
30, 31, 32, 34, 35, 46 O-ring FKM / EPDM / FFKM 7 744 Parallel pin Stainless steel 1 148 Screen (high pressure application) 1.4404 / 316L 1 149 Support ring Plastic 1 169 Bearing 1.4122 1 172 Diaphragm FKM / EPDM / PTFE-FKM 1 –
73, 74 O-ring FKM / EPDM / FFKM 2 –77 Lock screw 1.4401 / Stainless steel 1 –80 Guide ring 1.4404 / 316L 1 –
127
All prices in $
High EfficiencyHigh Efficiency
Typ
e 8
11,
821
Sp
are
pa
rts
Spare parts Type 811, 821 – Seat and Metal disc
Type 811, 821
Valve size 1" x 2" 11/2" x 2" 11/2" x 3"
Standard Orifice acc. to API 526
D E F D E F G H
Extra Orifice G H J
ItemDesig-
nationMat. Material No.
5 Seat 1.4404316L
202. 3149.9000 3249.9000 3349.9000 3449.9000 3549.9000 3649.9000 3749.9000 3849.9000 3949.9000 4049.9000 4149.9000 $585 $585 $585 $585 $619 $619 $619 $619 $619 $619 $619
7 Disc 1.4404316L
213. 1149.9000 1149.9000 1149.9000 1149.9000 1249.9000 1249.9000 1249.9000 1249.9000 1249.9000 1249.9000 1249.9000 $275 $275 $275 $585 $379 $379 $379 $379 $379 $379 $379
Valve size 4" x 6" 6" x 8" 8" x 10"
Standard Orifice acc. to API 526
L M N P Q R T
Extra Orifice P+ R+ T+
ItemDesig-
nationMat. Material No.
5 Seat 1.4404316L
202. 5049.9000 5149.9000 5249.9000 5349.9000 5449.9000 5549.9000 5649.9000 5749.9000 5849.9000 5949.9000 $1,204 $1,204 $1,204 $1,204 $1,204 $1,548 $1,548 $1,548 $2,065 $2,065
7 Disc 1.4404316L
213. 1549.9000 1549.9000 1549.9000 1549.9000 1549.9000 1649.9000 1649.9000 1649.9000 1749.9000 1749.9000 $1,032 $1,032 $1,032 $1,032 $1,032 $1,548 $1,548 $1,548 $2,753 $2,753
Valve size 2" x 3" 3" x 4"
Standard Orifice acc. to API 526
G H J J K L
Extra Orifice K+ N+
ItemDesig-
nationMat. Material No.
5 Seat 1.4404316L
202. 4249.9000 4349.9000 4449.9000 4549.9000 4649.9000 4749.9000 4849.9000 4949.9000 $1,032 $1,032 $1,032 $1,032 $1,118 $1,118 $1,118 $1,118
7 Disc 1.4404316L
213. 1349.9000 1349.9000 1349.9000 1349.9000 1449.9000 1449.9000 1449.9000 1449.9000 $516 $516 $516 $516 $688 $688 $688 $688
128
Available options
High EfficiencyHigh EfficiencyA
va
ila
ble
op
tio
ns
Remote Sensing*
R28
Field test connection
R26
Blowdown
adjusted to x%R44
Drain hole
J19: G1/2
R48: NPT 1/2"
Pilot lifting device
R25Pilot test gag
R33
Backflow preventer
(Standard)
Prevents return flow of the medium from the discharge into the system to be secured.
Set pressure testing with external test medium.
Mechanical lifting of pilot for verification of POSV operation.
Filter to prevent plugging of the pilot.
Blocking of operation in case of required hydrostatic testing of vessel.
*Actual operating pressure sensed to pilot. No influence of inlet pressure losses, stable function of POSV.
Functional test of main valve piston.
Blowdown adjusted: Closing pressure difference as a fixed value between 2 – 15%. Standard adjust-ment between 3 – 7%.
Manual blowdown
R27 to atmosphereR24 into main valve outlet
Pilot supply filter
R30
NACE sour gas
application
R70: acc. to MR0175R93: acc. to MR0103
Main valve disc
R71 metal sealing
Full nozzle
R69Flange rating class
300 x 300, 600 x 300H65, H67
Soft sealing
POSV complete
R05: EPDMR06: FFKMR04: FKM (Standard)
Disc with sealing plate
I39: PTFER67: PEEK
ED-Design
(Explosive decompression)R3A (FKM)R3B (FFKM)
129
Hig
h
Pe
rfo
rma
nc
e
Flanged Safety Relief Valves
Series 441 Page
• Type 441, 442 ANSI 130
• Type 441, 442 XXL 132
• Type 441, 442 DIN 134
• Spare parts kits Type 441, 442 137
Series 444 Page
• Type 444 ANSI 136
• Flange drillings Series 441, XXL, 444 138
• Flange facings Series 441, XXL, 444 139
Series 458 Page
• Type 457, 458 140
Spare parts Page
• Series 441 142
• Series 441 XXL 144
• Available options 146
High PerformanceHigh Performance
130
Type 441, 442 ANSI
Valve size 1" x 2" 11/2" x 2" 11/2" x 21/2" 2" x 3" 3" x 4" 4" x 6"
Actual Orifi ce diameter d0 [mm] 23 29 37 46 60 92
Actual Orifi ce area A0 [inch2] 0.644 1.024 1.667 2.576 4.383 10.304
API eff. Orifi ce area [inch2] 0.307 0.503 0.785 1.838 2.853 6.380
Weight [lb] 22 29 35 49 73 165
Body material: WCB
CL150 / CL300
Bonnet
closedH2 Art. No. 4412. 4812 4822 4832 4842 4862 4872
$1,203 $1,356 $1,632 $2,198 $2,928 $4,804
H3 Art. No. 4412. 4813 4823 4833 4843 4863 4873 $1,251 $1,443 $1,719 $2,284 $3,046 $4,923
H4 Art. No. 4412. 4814 4824 4834 4844 4864 4874 $1,308 $1,528 $1,806 $2,371 $3,201 $5,078
Bonnet
openH3 Art. No. 4422. 4815 4825 4835 4845 4865 4875
$1,251 $1,443 $1,719 $2,284 $3,046 $4,923
p [psig] S/G/L 3 – 710 (740) 3 – 695 3 – 665 3 – 715 3 – 580 3 – 350
Body material: CF8M
CL150 [H64]
Bonnet
closedH2 Art. No. 4414. 7912 – 7932 7942 7962 7972
$2,903 $3,912 $4,796 $6,663 $9,442
H4 Art. No. 4414. 7914 – 7934 7944 7964 7974 $3,214 $4,359 $5,244 $7,283 $10,062
p [psig] S/G/L 3 – 275 – 3 – 275 3 – 275 3 – 275 3 – 275
CL300
Bonnet
closedH2 Art. No. 4414. 7912 – 7932 7942 7962 7972
$2,903 $3,912 $4,796 $6,663 $9,442
H4 Art. No. 4414. 7914 – 7934 7944 7964 7974 $3,214 $4,359 $5,244 $7,283 $10,062
p [psig] S/G/L 3 – 616 (720) – 3 – 580 3 – 464 (580) 3 – 390 3 – 290 (350)
All prices in $
Available fl ange ratings and fl ange facings
on page 138 and 139
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Starting from 15 psig the safety valve is certifi ed acc. ASME Code Sec. VIII, Div. 1.
Typ
e
44
1,
44
2 A
NS
I
High PerformanceHigh Performance
131
High PerformanceHigh Performance
Options Type 441, 442 ANSI
Valve size 1" x 2" 11/2" x 2" 11/2" x 21/2" 2" x 3" 3" x 4" 4" x 6"
Actual Orifi ce diameter d0 [mm] 23 29 37 46 60 92
Actual Orifi ce area A0 [inch2] 0.644 1.024 1.667 2.576 4.383 10.304
Special machining of fl ange per fl ange $172 $172 $172 $172 $275 $275
Disc1) 316L L44 $62 $86 $86 $86 $138 $172
O-ring disc2)
NBR Buna-N® “N” J30 $120 $155 $155 $155 $275 $447
CR Neoprene® “K” J21 $120 $155 $155 $155 $275 $447
EPDM Buna-EP® “D” J22 $120 $155 $155 $155 $275 $447
FPM/FKM Viton® “L” J23 $120 $155 $155 $155 $275 $447
FFKM Kalrez® “C” J20 $379 $619 $619 $619 $1,376 $2,237
Drain hole1/4" J18 $69 $69 $69 $69 $69 x
1/2" J19 x x x x x $69
Test gagH4 J69 $138 $138 $138 $138 $138 $138
H2 J70 $138 $138 $138 $138 $138 $138
Stainless steel bellows441 J78
$482 $946 $946 $946 $1,548 $2,753 442 J68
Elastomer bellows J79 $172 $172 $172 $172 $275 $275
Heating jacket for body
4412 $2,409 $2,409 $3,097 $3,097 $3,441 $4,473
4422
4414 $1,893 $1,893 $2,409 $2,409 $3,441 $4,473
Heating jacket spacer H33 $1,204 $1,204 $1,204 $1,204 $2,065 $2,065
High temperature alloy spring X01 $34 $86 $86 $86 * *Stainless steel spring X04 $34 $155 $155 $172 $172 $688
Adaptor for lift indicator H4 J39 $172 $172 $172 $172 $172 $172
Lift indicator J93 $516 $516 $516 $516 $516 $516
Marking with stainless steel tag M29 $28 $28 $28 $28 $28 $28
Free of oil and grease J85 $310 $516 $516 $516 $860 $860
Gasket GYLON® (fi lled PTFE) L68 $55 $55 $55 $55 $103 $103
All prices in $
1) Valid for WCB, standard for CF8M2) See page 97 for elastomer limitation
Typ
e
44
1,
44
2 A
NS
I
132
Type 441, 442 XXL
Valve size 10" x 14" 12" x 16" 16" x 20"
Actual Orifi ce diameter d0 [mm] 200 235 295
Actual Orifi ce area A0 [inch2] 48.70 67.23 105.94
API Orifi ce designation 1.343 T 1.854 T 2.921 T
Weight [lb] 739 847 1297
Body material: carbon steel
CL150
Bonnet
closedH2 Art. No. 4412. 4762 4772 4782
$23,018 $30,454 $45,904
H3 Art. No. 4412. – – –
H4 Art. No. 4412. 4764 4774 4784 $23,533 $31,039 $46,490
Bonnet
openH3 Art. No. 4422. 4765 4775 4785
$23,396 $31,039 $46,490
p [psig] S/G/L 2.9 – 194 (232) 134 (232) 18 (116)
Body material: 316Ti
CL150
Bonnet
closedH2 Art. No. 4414. 4802 4902 4912
$41,439 $54,828 $82,644
H4 Art. No. 4414. 4804 4904 4914 $42,300 $55,861 $83,677
p [psig] S/G/L 2.9 – 0 (87) 0 (52) 0 (33)
Starting from 15 psig the safety valve is certifi ed acc. ASME Code Sec. VIII, Div. 1.
For option code for PN inlet and outlet please refer to page 138.
*) LEOS/G = LESER Effective Orifi ce steam/gas; LEOL = LESER Effective Orifi ce liquids.
All prices in $
Available fl ange ratings and fl ange facings
on page 138 and 139
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Typ
e
44
1,
44
2 X
XL
High PerformanceHigh Performance
133
High PerformanceHigh Performance
Options Type 441, 442 XXL
Valve size 10" x 14" 12" x 16" 16" x 20"
Actual Orifi ce diameter d0 [mm] 200 235 295
Actual Orifi ce area A0 [inch2] 48.70 67.23 105.94
Body material Inlet 1.4571Outlet 1.0460/1.0425
H3A $18,581 $25,807 $29,248
Drain hole 1/2"
Test gagH4 J69 $138 $138 $138
H2 J70 $138 $138 $138
Stainless steel bellows441 J78
$5,505 $6,882 $7,570 442 J68
Stainless steel spring X04 on request
Special machining offl ange inlet per fl ange NPS
10" 12" 16"
$516 $860 $946
Special machining offl ange outlet per fl ange NPS
14" 16" 20"
$860 $946 $946
Flange pressure rating 4412
CL300 $413 $482 $757
Flange pressure rating 4414
CL300 $1,720 $3,957 $5,850
Adaptor for lift indicator H4 J39 $172 $172 $172
Lift indicator J93 $516 $516 $516
Marking with stainless steel tag M29 $28 $28 $28
All prices in $
Typ
e
44
1,
44
2 X
XL
134
Type 441, 442 DIN
DNI 20 25 32 40 50 65 80 100 125 150 200
DNO 40 40 50 65 80 100 125 150 200 250 300
Actual Orifi ce diameter d0 [mm] 18 23 29 37 46 60 74 92 98 125 165
Actual Orifi ce area A0 [inch2] 0.394 0.644 1.024 1.667 2.576 4.383 6.666 10.304 11.691 19.021 33.142
API Orifi ce designation E F G H K L N P P Q R
API eff. Orifi ce area [inch2] 0.196 0.307 0.503 0.785 1.838 2.853 4.340 6.380 6.380 11.050 16.000
Weight [lb] 20 20 26 35 49 71 123 165 187 289 663
Body material: ductile Gr. 60-40-18
PN 40 CL150 PN 16 CL150PN 25
CL150
Bonnet
closedH2 Art. No. 4415. – 7382 7392 7402 7412 7422 7432 7442 7452 7462 7472
$902 $1,019 $1,226 $1,649 $1,869 $2,504 $3,603 $4,944 $6,963 $11,343
H3 Art. No. 4415. – 7383 7393 7403 7413 7423 7433 7443 7453 – – $951 $1,103 $1,312 $1,735 $1,988 $2,623 $3,723 $5,065
H4 Art. No. 4415. – 7384 7394 7404 7414 7424 7434 7444 7454 7464 7474 $1,006 $1,190 $1,398 $1,821 $2,142 $2,778 $3,878 $5,220 $7,479 $11,859
Bonnet
openH3 Art. No. 4425. – 7385 7395 7405 7415 7425 7435 7445 7455 7465 7475
$951 $1,103 $1,312 $1,735 $1,988 $2,623 $3,723 $5,065 $7,342 $11,722
p [psig] S/G/L 1.5 – – 580 580 580 580 580 464 (580) 580 230 230 290 (363)
Body material: WCB
PN 40 CL150PN 25
CL150
Bonnet
closedH2 Art. No. 4412. 4502 4512 4522 4532 4542 4552 4562 4572 4582 4592 4612
$1,203 $1,203 $1,356 $1,632 $2,198 $2,490 $3,337 $4,804 $6,592 $9,285 $15,124
H3 Art. No. 4412. 4503 4513 4523 4533 4543 4553 4563 4573 4583 – – $1,251 $1,251 $1,443 $1,719 $2,284 $2,611 $3,456 $4,923 $6,710
H4 Art. No. 4412. 4504 4514 4524 4534 4544 4554 4564 4574 4584 4594 4614 $1,308 $1,308 $1,528 $1,806 $2,371 $2,765 $3,612 $5,078 $6,865 $9,800 $15,641
Bonnet
openH3 Art. No. 4422. 4505 4515 4525 4535 4545 4555 4565 4575 4585 4595 4615
$1,251 $1,251 $1,443 $1,719 $2,284 $2,611 $3,456 $4,923 $6,710 $9,662 $15,503
p [psig] S/G/L 1.5 – 580 580 580 580 580 580 464 (580) 580 230 230 290 (363)
Body material: CF8M
PN 40 CL150
Bonnet
closedH2 Art. No. 4414. – 1) 4642 4652 4662 4672 4682 4692 4702 4712 4722 –
$2,903 $3,374 $3,912 $4,796 $5,600 $7,678 $9,442 $12,290 $17,007
H4 Art. No. 4414. – 1) 4644 4654 4664 4674 4684 4694 4704 4714 4724 – $3,214 $3,822 $4,359 $5,244 $6,219 $8,297 $10,062 $12,911 $17,869
p [psig] S/G/L 1.5 – – 580 580 580 480 (540) 410 200 (360) 290 (380) 220 (350) 100 (140) –
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Starting from 15 psig the safety valve is certifi ed acc. ASME Code Sec. VIII, Div. 1.
1) Please use Type 4594.
All prices in $
Available fl ange ratings and fl ange facings
on page 138 and 139
Art. No. Option code
4594.2182 I26I49
4594.2184 I26I49
Typ
e
44
1,
44
2 D
IN
High PerformanceHigh Performance
135
High PerformanceHigh Performance
Options Type 441, 442 DIN
DNI 20 25 32 40 50 65 80 100 125 150 200
DNO 40 40 50 65 80 100 125 150 200 250 300
Actual Orifi ce diameter d0 [mm] 18 23 29 37 46 60 74 92 98 125 165
Actual Orifi ce area A0 [inch2] 0.394 0.644 1.024 1.667 2.576 4.383 6.666 10.304 11.691 19.021 33.142
Special machining of fl ange per fl ange $172 $172 $172 $172 $172 $275 $275 $275 $275 $516 $516
Disc1) 316L L44 $62 $62 $86 $86 $86 $138 $138 $172 $172 $172 $206
O-ring disc2)
NBR Buna-N® “N” J30 $120 $120 $155 $155 $155 $275 $275 $447 $447 $447
on request
CR Neoprene® “K” J21 $120 $120 $155 $155 $155 $275 $275 $447 $447 $447
EPDM Buna-EP® “D” J22 $120 $120 $155 $155 $155 $275 $275 $447 $447 $447
FPM/FKM Viton® “L” J23 $120 $120 $155 $155 $155 $275 $275 $447 $447 $447
FFKM Kalrez® “C” J20 $379 $379 $619 $619 $619 $1,376 $1,376 $2,237 $2,237 $2,237
Drain hole1/4" J18 $69 $69 $69 $69 $69 $69 $69 x x x x
1/2" J19 x x x x x x x $69 $69 $69 $69
Test gagH4 J69 $138 $138 $138 $138 $138 $138 $138 $138 $138 $138 $138
H2 J70 $138 $138 $138 $138 $138 $138 $138 $138 $138 $138 $138
Stainless steel bellows441 J78
$482 $482 $946 $946 $946 $1,548 $1,548 $2,753 $2,753 $4,129 $5,505 442 J68
Elastomer bellowsEPDM J79 $172 $172 $172 $172 $172 $275 $275 $344 $344 $344 –
NBR J87 $344 $344 $344 $344 $344 $551 $551 $688 $688 $688 –
Heating jacketfor body
4412– $2,409 $2,409 $3,097 $3,097 $3,441 $3,441 $4,473 $4,473 $6,882
on request4422
4414 – $1,893 $1,893 $2,409 $2,409 $2,925 $3,441 $4,473 $4,473 $6,882 on request
Heating jacket spacer H33 $1,204 $1,204 $1,204 $1,204 $1,204 $2,065 $2,065 $2,065 $2,065 $2,065 on request
High temperature alloy spring X01 $34 $34 $86 $86 $86 * * * * * *Stainless steel spring X04 $34 $34 $155 $155 $172 $172 $206 $688 $688 $1,376 on request
Adaptor for lift indicator
H4 J39 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172
Lift indicator J93 $516 $516 $516 $516 $516 $516 $516 $516 $516 $516 $516
Marking with stainless steel tag M29 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28
Free of oil and grease J85 $310 $310 $516 $516 $516 $860 $860 $860 $860 $860 $860
Gasket GYLON® (fi lled PTFE) L68 $55 $55 $55 $55 $55 $103 $103 $103 $103 $172 –
All prices in $
Typ
e
44
1,
44
2 D
IN
1) Valid for WCB, standard for CF8M2) See page 97 for elastomer limitation
136
Type 444 ANSI
Valve size 1" x 2" 11/2" x 3" 2" x 3" 21/2" x 4" 3" x 4" 3" x 4"
Actual Orifi ce diameter d0 [mm] 23 37 46 60 74 74
Actual Orifi ce area A0 [inch2] 0.644 1.667 2.576 4.383 6.666 6.666
API eff. Orifi ce area [inch2] 0.307 0.785 1.838 2.853 4.340 4.340
Weight [lb] 16 29 31 51 53 53
Body material: 316L
CL150
Bonnet
closedH2 Art. No. 4444. 8902 8922 8932 8942 8952 8962
$2,756 $3,718 $4,556 $6,329 $8,970 $8,970
H4 Art. No. 4444. 8904 8924 8934 8944 8954 8964 $3,065 $4,164 $5,004 $6,949 $9,589 $9,589
p [psig] S/G 1.5 – 230 230 230 230 98.6 –
p [psig] L 1.5 – 230 230 230 230 98.6 98.7 – 230
All prices in $
Available fl ange ratings and fl ange facings
on page 138 and 139
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Starting from 15 psig the safety valve is certifi ed acc. ASME Code Sec. VIII, Div. 1.
Options Type 444 ANSI
Valve size 1" x 2" 11/2" x 3" 2" x 3" 21/2" x 4" 3" x 4" 3" x 4"
Actual Orifi ce diameter d0 [mm] 23 37 46 60 74 74
Actual Orifi ce area A0 [inch2] 0.644 1.667 2.576 4.383 6.666 6.666
Lift stopper J51 $275 $275 $275 $413 $413 $413
Adaptor for lift indicatorBonnet J38 $172 – – – – –
H4 J39 – $172 $172 $172 $172 $172
Lift indicator J93 $516 $516 $516 $516 $516 $516
Marking with stainless steel tag M29 $28 $28 $28 $28 $28 $28
Typ
e 4
44
AN
SI
High PerformanceHigh Performance
137
High PerformanceHigh PerformanceAll prices in $
Typ
e 4
41
Sp
are
Pa
rts K
its
LESER Original Spare Parts Kits – Type 441/442 DIN, 441/442 ANSI
Spare Parts Kits
DN 20 25 32 40 50 65 80 100 125 150 200
Valve size – 1" x 2" 11/2" x 2" 11/2" x 21/2" 2" x 3" 3" x 4" – 4" x 6" – – –
Art. No. 5012. 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211
$55 $55 $69 $69 $69 $120 $138 $206 $206 $241 $585
The LESER Spare Parts Kits contain all the parts recommended for the regular maintenance of a LESER safety valve
Contents
Item Component Material Quantity
7.5 Securing ring (Disc) 1.4571 / 316Ti 1
8.4 Securing ring (Guide) 1.4571 / 316Ti 1
14 Split ring 1.4404 / 316L 2
40.3 Spacer 1.4571 / 316Ti 3
57 Pin 1.4310 / Stainless steel 1
59 Securing ring (Split ring) 1.4571 / 316Ti 1
60 GasketGraphite / 1.4401
Graphite / 3163
61 Ball 1.4401 / 316 1
1.9 O-ring (Lifting device H4) FKM 1
138
Note: Flange thickness and outer diameter can differ from standard.
Type 4412, 4414 ANSI – Flange drillings
Inlet Outlet
DN d0
ASME B16.5DN d0
ASME B16.5
CL150 CL300 CL150 CL300
1" 23 H64 H65 2" 23 * –
11/2" 29 H64 H65 2" 29 * –
11/2" 37 H64 H65 21/2" 37 * –
2" 46 H64 H65 3" 46 * –
3" 60 H64 H65 4" 60 * –
4" 92 H64 H65 6" 92 * –
Type 4412, 4422, 4414 XXL – Flange drillings
Inlet Outlet
DN NPS d0 ASME B16.5 DIN EN 1092
DN NPS d0 ASME B16.5 DIN EN 1092
CL150 CL300 PN 10 PN 16 PN 25 PN 40 CL150 CL300 PN 10 PN 16 PN 25 PN 40
250 10" 200 H64 – H44 H45 H46 – 350 14" 200 H79 – H50 H51 – –
300 12" 235 H64 – H44 H45 H46 – 400 16" 235 H79 – H50 H51 – –
400 16" 295 H64 – H44 H45 H46 – 500 20" 295 H79 – H50 H51 – –
Type 4415, 4425 DIN – Flange drillings
Inlet Outlet
DN d0 DIN EN 1092
DN d0 DIN EN 1092
PN 10 PN 16 PN 25 PN 40 PN 10 PN 16 PN 25 PN 40
25 23 * * * * 40 23 * * * *32 29 * * * * 50 29 * * (*) (*)
40 37 * * * * 65 37 * * (H15) (H15)
50 46 * * * * 80 46 * * (*) (*)
65 60 H45 H45 * * 100 60 * * – –
80 74 * * * * 125 74 * * – –
100 92 H45 H45 * * 150 92 * * – –
125 98 * * – – 200 98 H50 * – –
150 125 * * – – 250 125 H50 * – –
200 casted 165 H44 H45 * – 300 casted 165 * (H51) – –
Type 4412, 4422, 4414 DIN – Flange drillings
Inlet Outlet
DN NPS d0 ASME B16.5 DIN EN 1092
DN NPS d0 ASME B16.5 DIN EN 1092
CL150 CL300 PN 10 PN 16 PN 25 PN 40 CL150 CL300 PN 10 PN 16 PN 25 PN 40
20 3/4" 18 H64 – * * * * 40 11/2" 18 H79 – * * * *25 1" 23 H64 – * * * * 40 11/2" 23 H79 – * * * *32 11/4" 29 H64 H65 * * * * 50 2" 29 H79 [H80] * * * *40 11/2" 37 H64 – * * * * 65 21/2" 37 H79 – * * (H15) (H15)
50 2" 46 H64 [H65] * * * * 80 3" 46 H79 – * * (*) (*)
65 21/2" 60 H64 – H45 H45 * * 100 4" 60 [H79] – * * – –
80 3" 74 H64 – * * * * 125 5" 74 H79 – * * – –
100 4" 92 [H64] – H45 H45 * * 150 6" 92 H79 – * * – –
125 5" 98 H64 – H45 H45 * * 200 8" 98 H79 – H50 * – –
150 6" 125 H64 – H45 H45 * * 250 10" 125 H79 – H50 * – –
200 8" 165 H64 – H44 H45 * – 300 12" 165 H79 – H50 * H52 H52
Type 4444 – Flange drillings
Inlet Outlet
NPS d0 ASME B16.5
NPS d0 ASME B16.5
CL150 CL300 CL150 CL300
1" 23 * – 2" 23 * –
11/2" 37 * – 3" 37 * –
2" 46 * – 3" 46 * –
21/2" 60 * – 4" 60 * –
3" 74 * – 4" 74 * –
Series 441 – Flange drillings
Se
rie
s 4
41
Fla
ng
e d
rillin
gs
High PerformanceHigh Performance
139
High PerformanceHigh Performance
Type 441, 442 DIN / 441, 442 XXL / 4444 – Flange facings – General
Indication Standard Inlet Outlet Remark
Flange undrilled – H38 H39
Type 441, 442 DIN / 441, 442 XXL / 4444 – Flange facings – according to DIN EN 1092
Inlet Outlet Remark
Flange facing
(see also LDeS 3313.40)
441/442 441/442 (Rz-data according to DIN EN 1092 in μm)
PN 10 –PN 40
PN 63 –PN 400
PN 10 –PN 40
PN 63 –PN 400
Raised faceType B1 * – * – Facing: Rz 12.5 – 50
Type B2 L36 * L38 * Facing: Rz 3.2 – 12.5
Ste
el fl
ange
s on
ly Tongue face C3) H94 H92
Groove face D3) H93 H91
Male face E H96 H98
Female face F H97 H99
O-ring male face G J01 J02
O-ring female face H J03 J04
Type 441, 442 DIN / 441, 442 XXL / 4444 – Flange facings according to ASME B16.5
Flange facing Smooth fi nish1) Serrated fi nish RTJ-groove
DN/NPS Inlet Outlet Inlet Outlet Inlet Outlet
Type Inlet Outlet Option code Option code Flange class Option code Flange class Option code
4412, 4414, 4422, 4444 all all L52 L53 * * 150 H62 150 H63
441 ANSI2) ≤ 4" ≤ 6" L52 L53 * * 150, 300 H62 150 H63
3) LESER manufactures the groove at fl anged valves by milling. If you require a turned surface in the bottom of the groove according to DIN EN 1092-1 an additional option code is necessary: “S01: bottom of the groove turned.”
Note: Flange drillings and facings meet always the requirements of mentioned fl ange standards. Flange thickness and outer diameter may vary from fl ange standard.
Series 441 – Flange facings
Se
rie
s 4
41
Fla
ng
e f
ac
ing
s
1) Smooth fi nish is not defi ned in the effective standards.2) Deviating center to face dimension.
140
High PerformanceHigh Performance
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
All prices in $
Type 457, 458
Valve size 1" x 2" 2" x 3" 3" x 4" 4" x 6" 6" x 10"
Actual Orifi ce diameter d0 [mm] 15 20 30 40 50 60 50 60 74 88 110
Actual Orifi ce area A0 [inch2] 0.274 0.487 1.096 1.948 3.043 4.383 3.043 4.383 6.666 9.427 14.730
API Orifi ce designation E F H J K L K L N P Q
API eff. Orifi ce area [inch2] 0.196 0.307 0.785 1.287 1.838 2.853 1.838 2.853 4.340 6.380 11.050
Weight [lb] 44 99 194 346 289
Body material: WCB
CL300 – CL1500 CL300 – CL600 CL300
Bonnet
closedH2 Art. No. 4582. 6102 6112 6122 6132 6142 6152 6162 6172 6182 6192 4602
$3,169 $3,169 $4,726 $4,726 $7,360 $7,360 $11,643 $11,643 $11,643 $11,643 $13,566
H3 Art. No. 4582. 6103 6113 6123 6133 6143 6153 – – – – – $3,256 $3,256 $4,846 $4,846 $7,482 $7,482
H4 Art. No. 4582. 6104 6114 6124 6134 6144 6154 6164 6174 6184 6194 4604 $3,343 $3,343 $5,001 $5,001 $7,636 $7,636 $12,160 $12,160 $12,160 $12,160 $14,082
Bonnet
openH3 Art. No. 4572. 6105 6115 6125 6135 6145 6155 6165 6175 6185 6195 4605
$3,256 $3,256 $4,846 $4,846 $7,482 $7,482 $12,022 $12,022 $12,022 $12,022 $13,945
p [psig] S/G/L 36 – 4350 2570 1815 1420 1885 1115 620 665 770 490 260
(3045) (1660) (2115) (2320) (2130) (1100) (700) (557)
Body material: WC6
CL300 – CL1500 CL300 – CL600 CL300
Bonnet
closedH2 Art. No. 4587. 6302 6312 6322 6332 6342 6352 6362 6372 6382 6392 –
$4,326 $4,326 $5,907 $5,907 $9,579 $9,579 $13,130 $13,130 $13,130 $13,130
H3 Art. No. 4587. 6303 6313 6323 6333 6343 6353 – – – – – $4,413 $4,413 $6,028 $6,028 $9,698 $9,698
H4 Art. No. 4587. 6304 6314 6324 6334 6344 6354 6364 6374 6384 6394 – $4,499 $4,499 $6,183 $6,183 $9,854 $9,854 $13,646 $13,646 $13,646 $13,646
Bonnet
openH3 Art. No. 4577. 6305 6315 6325 6335 6345 6355 6365 6375 6385 6395 –
$4,413 $4,413 $6,028 $6,028 $9,698 $9,698 $13,509 $13,509 $13,509 $13,509
p [psig] S/G/L 36 – 4350 2570 1815 1420 1885 1115 620 665 770 490 –
(3045) (1660) (2115) (2320) (2130) (1100) (700)
Body material: CF10M
CL300 – CL1500 CL300 – CL600 CL300
Bonnet
closedH2 Art. No. 4584. 6202 6212 6222 6232 6242 6252 6262 6272 6282 6292 4732
$7,308 $7,308 $13,020 $13,020 $15,723 $15,723 $22,419 $22,419 $22,419 $22,419 $39,265
H4 Art. No. 4584. 6204 6214 6224 6234 6244 6254 6264 6274 6284 6294 4734 $7,755 $7,755 $13,639 $13,639 $16,343 $16,343 $23,281 $23,281 $23,281 $23,281 $40,126
p [psig] S/G/L 36 – 3620 2115 1190 885 885 510 230 160 245 0 64
(1880) (945) (1505) (745) (1030) (800) (710) (460) (145)
Typ
e 4
57,
45
8
141
High PerformanceHigh PerformanceAll prices in $
Options Type 457, 458
Valve size 1" x 2" 2" x 3" 3" x 4" 4" x 6" 6" x 10"
Actual Orifi ce diameter d0 [mm] 15 20 30 40 50 60 50 60 74 88 110
Actual Orifi ce area A0 [inch2] 0.274 0.487 1.096 1.948 3.043 4.383 3.043 4.383 6.666 9.427 14.730
Special machining of fl ange per fl ange $172 $172 $172 $172 $275 $275 $275 $275 $275 $275 $516
Butt-weld connection S05 $860 $860 $1,376 $1,376 $1,720 $1,720 $2,237 $2,237 $2,237 $2,237 $2,237
O-ring disc1)
CR Neoprene® “K” J21 – $120 $155 $155 $155 $275 $155 $275 $275 $447 $447
EPDM Buna-EP® “D” J22 – $120 $155 $155 $155 $275 $155 $275 $275 $447 $447
FPM/FKM Viton® “L” J23 – $120 $155 $155 $155 $275 $155 $275 $275 $447 $447
FFKM Kalrez® “C” J20 – $379 $619 $619 $619 $1,376 $619 $1,376 $1,376 $2,237 $2,237
Drain hole1/4" J18 $69 $69 $69 $69 $69 $69 x x x x x
1/2" J19 x x x x x x $69 $69 $69 $69 $69
Test gagH4 J69 $138 $138 $138 $138 $138 $138 $138 $138 $138 $138 $138
H2 J70 $138 $138 $138 $138 $138 $138 $138 $138 $138 $138 $138
Stainless steel bellows
458 J78 $723 $723 $1,462 $1,462 $2,753 $2,753 $4,817 $4,817 $4,817 $4,817 $5,850
457 J68
High temperature equipment
4577J88 $1,290 $1,290 $2,065 $2,065 $3,441 $3,441 $6,882 $6,882 $6,882 $6,882 x
4587
Heating jacket for body
4572 $3,097 $3,097 $3,441 $3,441 $4,473 $4,473 $6,882 $6,882 $6,882 $6,882 on request
4587
4584 $2,409 $2,409 $3,441 $3,441 $4,473 $4,473 $6,882 $6,882 $6,882 $6,882 on request
Heating jacket spacer H33 $1,204 $1,204 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065 on request
SpringStainless steel X04 $155 $155 $172 $172 $688 $688 $1,376 $1,376 $1,376 $1,376 on request
Inconel X08 $310 $310 $1,118 $1,118 $1,720 $1,720 $4,817 $4,817 $4,817 $4,817 on request
Inspection certifi cate for body material: DIN EN 10204-3.2 for
WC6 H09 $344 $344 $344 $344 $516 $516 $516 $516 $516 $516 on request
Adaptor for lift indicator
H4 J39 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172 $172
Lift indicator J93 $516 $516 $516 $516 $516 $516 $516 $516 $516 $516 $516
Marking with stainless steel tag M29 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28 $28
Free of oil and grease J85 $310 $310 $516 $516 $860 $860 $860 $860 $860 $860 $860
Gasket GYLON® (fi lled PTFE) L68 $55 $55 $103 $103 $103 $103 $172 $172 $172 $172 $172
Typ
e 4
57,
45
8
1) See page 97 for elastomer limitation
142
Spare parts
Valve sizeType 4412 – WCB
Disc Material: Hardened stainless steel
Type 4414 – CF8M
Disc Material: 316L
Disc – Metal to metal seat (Item 7), detachable lifting aid
– DN 20 x DN 40210.7039.9000 –
$275
1" x 2" DN 25 x DN 40210.9739.9000 210.9749.9000
$275 $275
11/2" x 2" DN 32 x DN 50210.9839.9000 210.9849.9000
$379 $379
11/2" x 21/2" DN 40 x DN 65210.9939.9000 210.9949.9000
$413 $413
2" x 3" DN 50 x DN 80210.8739.9000 210.8749.9000
$516 $516
3" x 4" DN 65 x DN 100220.1639.9000 220.1649.9000
$654 $654
– DN 80 x DN 125220.1739.9000 220.1749.9000
$946 $946
4" x 6" DN 100 x DN 150220.1839.9000 220.1849.9000
$1,204 $1,204
Series 441
Valve size O-ring size ARP-No. CR Neoprene® “K” EPDM Buna-EP® “D” FPM/FKM Viton® “L” FFKM Kalrez® “C”
Disc – Soft seal, material: 316L (Item 7)
– DN 20 x DN 40200.4949.9051 200.4949.9041 200.4949.9071 200.4949.9091
$310 $310 $310 $516
1" x 2" DN 25 x DN 40 1" x 1/8" 214200.5049.9051 200.5049.9041 200.5049.9071 200.5049.9091
$310 $310 $310 $516
11/2" x 2" DN 32 x DN 50 11/4" x 1/8" 218200.5149.9051 200.5149.9041 200.5149.9071 200.5149.9091
$413 $413 $413 $723
11/2" x 21/2" DN 40 x DN 65 15/8" x 1/8" 223200.5249.9051 200.5249.9041 200.5249.9071 200.5249.9091
$447 $447 $447 $946
2" x 3" DN 50 x DN 80 2" x 1/8" 226200.5349.9051 200.5349.9041 200.5349.9071 200.5349.9091
$516 $516 $516 $1,462
3" x 4" DN 65 x DN 100 25/8" x 3/16" 334200.5449.9051 200.5449.9041 200.5449.9071 200.5449.9091
$688 $688 $688 $1,893
– DN 80 x DN 125200.5549.9051 200.5549.9041 200.5549.9071 200.5549.9091
$1,032 $1,032 $1,032 $2,753
4" x 6"DN 100 x
DN 15041/8" x 3/16" 346
on request 200.5649.9041 200.5649.9071 200.5649.9091
$1,634 $1,634 $1,634 $3,441
Valve size Graphite + 316SS Gylon® (fi lled PTFE)
Gaskets – Body / bonnet (Item 60)
– DN 20 x
DN 40
500.0407.0000 500.0405.0000
$14 $55
1" x 2" DN 25 x
DN 40
500.0607.0000 500.0605.0000
$14 $55
11/2" x 2"DN 32 x
DN 50
500.0807.0000 500.0805.0000
$14 $55
11/2" x 21/2"DN 40 x
DN 65
500.1007.0000 500.1005.0000
$14 $55
2" x 3"DN 50 x
DN 80
500.1207.0000 500.1205.0000
$14 $55
3" x 4"DN 65 x
DN 100
500.1607.0000 500.1605.0000
$28 $103
–DN 80 x
DN 125
500.1907.0000 500.1905.0000
$34 $103
4" x 6"DN 100 x
DN 150
500.2107.0000 500.2105.0000
$48 $103
Valve size Ø [mm] Part-No.
Ball – Material 316 (Item 61)
–DN 20 x
DN 406
510.0104.0000
$14
1" x 2" DN 25 x
DN 406
510.0104.0000
$14
11/2" x 2"DN 32 x
DN 506
510.0104.0000
$14
11/2" x 21/2"DN 40 x
DN 659
510.0204.0000
$14
2" x 3"DN 50 x
DN 809
510.0204.0000
$14
3" x 4"DN 65 x
DN 10012
510.0304.0000
$21
–DN 80 x
DN 12512
510.0304.0000
$21
4" x 6"DN 100 x
DN 15015
510.0404.0000
$34
All prices in $
Se
rie
s 4
41
Sp
are
pa
rts
High PerformanceHigh Performance
143
High PerformanceHigh Performance
Valve size O-ring size ARP-No. CR Neoprene® “K” EPDM Buna-EP® “D” FPM/FKM Viton® “L” FFKM Kalrez® “C”
O-ring – Soft seal, material: 316L (Item 7.4)
–DN 20 x
DN 40
502.0171.2651 502.0171.2641 502.0171.2671 502.0171.2691
$21 $21 $28 $241
1" x 2" DN 25 x
DN 401" x 1/8" 214
502.0249.3551 502.0249.3541 502.0249.3571 502.0249.3591
$21 $21 $28 $241
11/2" x 2"DN 32 x
DN 5011/4" x 1/8" 218
502.0313.3551 502.0313.3541 502.0313.3571 502.0313.3591
$21 $21 $28 $413
11/2" x 21/2"DN 40 x
DN 6515/8" x 1/8" 223
502.0408.3551 502.0408.3561 502.0408.3571 502.0408.3591
$21 $21 $41 $482
2" x 3"DN 50 x
DN 802" x 1/8" 226
502.0503.3551 502.0503.3561 502.0503.3571 502.0503.3591
$21 $21 $69 $946
3" x 4"DN 65 x
DN 10025/8" x 3/16" 334
502.0660.5351 502.0660.5341 502.0660.5371 502.0660.5391
$28 $28 $138 $1,204
–DN 80 x
DN 125
502.0819.5351 502.0819.5341 502.0819.5371 502.0819.5391
$28 $28 $172 $1,720
4" x 6"DN 100 x
DN 15041/8" x 3/16" 346
On request 502.1041.5361 502.1041.5371 502.1041.5391
$28 $28 $241 $2,409
Valve sizeStandard Bellows Low pressure bellows
Part-No. Conversion Kit1) Part-No. Conversion Kit1)
Bellows and Bellows Conversion Kit – Material 316L (Item 15)
– DN 20 x DN 40400.0149.0000 5021.1040 400.0149.0021 on request
$379 $482 $379
1" x 2" DN 25 x DN 40400.0949.0000 5021.1041 400.0949.0021 on request
$379 $482 $379
11/2" x 2" DN 32 x DN 50400.1049.0000 5021.1042 400.1049.0021 on request
$723 $946 $723
11/2" x 21/2" DN 40 x DN 65400.1149.0000 5021.1043 400.1149.0021 on request
$723 $946 $723
2" x 3" DN 50 x DN 80400.1249.0000 5021.1044 400.1249.0021 on request
$723 $946 $723
3" x 4" DN 65 x DN 100400.1349.0000 5021.1045 400.1349.0021 on request
$1,204 $1,548 $1,204
– DN 80 x DN 125400.1449.0000 5021.1046 400.1449.0021 on request
$1,204 $1,548 $1,204
4" x 6" DN 100 x DN 150400.0849.0000 5021.1047 400.0849.0021 on request
$2,237 $2,753 $2,237 1) A conversion kit contains the following parts: bellows, spacer, spindle, gaskets, guide, studs.
Valve size Spindle – Ø [mm] Part-No.
Split ring – Material 316L (Item 14)
–DN 20 x
DN 4012
251.0149.0000
$7
1" x 2" DN 25 x
DN 4012
251.0149.0000
$7
11/2" x 2"DN 32 x
DN 5016
251.0249.0000
$7
11/2" x 21/2"DN 40 x
DN 6516
251.0249.0000
$7
2" x 3"DN 50 x
DN 8016
251.0249.0000
$7
3" x 4"DN 65 x
DN 10020
251.0349.0000
$7
–DN 80 x
DN 12520
251.0349.0000
$7
4" x 6"DN 100 x
DN 15024
251.0449.0000
$14
Valve size Spindle – Ø [mm] Part-No.
Pin (Item 57)
– DN 20 x
DN 4012
480.0505.0000
$7
1" x 2" DN 25 x
DN 4012
480.0505.0000
$7
11/2" x 2"DN 32 x
DN 5016
480.0705.0000
$7
11/2" x 21/2"DN 40 x
DN 6516
480.0705.0000
$7
2" x 3"DN 50 x
DN 8016
480.0705.0000
$7
3" x 4"DN 65 x
DN 10020
480.1005.0000
$7
–DN 80 x
DN 12520
480.1005.0000
$7
4" x 6"DN 100 x
DN 15024
480.1105.0000
$7
Spare parts All prices in $
Se
rie
s 4
41
Sp
are
pa
rts
Series 441
144
Spare parts
Valve size Part-No.
Disc – Metal to metal seat, material 316Ti (Item 7)
10" x 14" 230.1649.9000
$3,269
12" x 16" 200.2349.9000
$5,333
16" x 20" 200.2449.9000
$7,226
Series 441 XXL
Orifi ce [inch2] Part-No.
Gaskets – Body / bonnet, material graphite / 316L (Item 60)
10" x 14" 500.2807.0000
$172
12" x 16" 500.3507.0000
$206
16" x 20" 500.3607.0000
$206
Orifi ce [inch2] Spindle – Ø [mm] Part-No.
Ball – Material 316 (Item 61)
10" x 14" 18510.0504.000
$55
12" x 16" 18510.0504.000
$55
16" x 20" 18510.0504.000
$55
Se
rie
s 4
41
XX
L
Sp
are
pa
rts
All prices in $
High PerformanceHigh Performance
145
High PerformanceHigh Performance
Series 441 XXL
Orifi ce [inch2] Spindle – Ø [mm] Part-No.
Split ring – Material 316L (Item 14)
10" x 14" 35251.1549.0000
$41
12" x 16" 35–
–
16" x 20" 35–
–
Orifi ce [inch2] Spindle – Ø [mm] Part-No.
Pin – Material 316SS (Item 57)
10" x 14" 35480.1405.0000
$7
12" x 16" 35480.0605.0000
$7
16" x 20" 35480.0605.0000
$7
Orifi ce [inch2] Part-No.
Bellows – Material 316L (Item 15)
10" x 14" Special
$5,505
12" x 16" Special
$6,882
16" x 20" Special
$7,914
Spare parts
Se
rie
s 4
41
XX
L
Sp
are
pa
rts
All prices in $
146
High PerformanceHigh Performance Available options
Ava
ila
ble
op
tio
ns
Body full nozzle design
Lift indicator
J39: Adaptor for lift indicator H4J93: Lift indicator
O-ring damper H2
J65
Heating jacket
Disc with inserted sealing plate
J44: PTFE-FDA “A”J48: PCTFE “G”J49: SP “T”
Stainless steel bellows
J68: Open bonnetJ78: Closed bonne
Conversion kit for
stainless steel bellows
On request
Plain lever H3
H3
Test gag
J69: H4J70: H2
O-ring damper H4
J66
Drain hole
J18: G 1/4 J19: G 1/2
O-ring disc
J21: CR Neoprene® “K”J22: EPDM Buna-EP® “D”J23: FPM/FKM Viton® “L”J20: FFKM Kalrez® “C”
Packed lever H4
H4Bolted lifting device H6
H6 Screwed cap H2
H2
Type 441 for industrial refrigera-
tion
H91: Outlet groove face DH93: Inlet groove face D
147
Cle
an
Se
rvic
e
Safety Relief Valves
Series 48X Page
• Type 481 148
– for small capacity
• Type 483 149
– for small and medium capacity
• Type 484, 503 150
– vessel connection,
dead space free
• Type 485, 503 152
– integrated pipework connection
and dead space free
• Type 488 154
– for high capacity
• Spare parts 156
• Available Options 160
CleanServiceCleanService
148
Clean ServiceClean Service
Type 481
Valve size Depends on actual connection, see belowActual Orifi ce diameter d0 [mm] 10 10
Actual Orifi ce area A0 [inch2] 0.122 0.122API Orifi ce designation 0.462 D 0.462 D
Weight [lb] 3.1 3.1
Body material: 316L
Bonnet
closedH2 Art. No. 4814. 7692 7682
$992 $992
H4 Art. No. 4814. 7694 7684 $1,076 $1,076
H8 Art. No. 4814. 7698 7688 $2,175 $2,175
p [psig] S/G/L 1.5 – 232 73 – 9851)
All prices in $
Options
Tri-Clamp connection outlet 1" see below $379 $379
O-ring disc
EPDM J22 * *FKM J23 $34 $34
FFKM J20 $155 $155
Lifting deviceDouble piston design
H8 J41 $275 $275
Test gagH4 J69 – –H2 J70 $138 $138
LESER Surface packageB50 * *Clean fi nish Inlet Ra 30 μinch
LESER Surface packageB51 $206 $206
HyClean fi nish Inlet Ra 30 μinch
LESER Surface packageB52 $585 $585
Sterile fi nish Inlet Ra 20 μinch
Marking with stainless steel tag M29 $28 $28
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Available connections Inlet Outlet
d0 [mm] 10
Tri-Clamp® Option code
NPS – 1" – 1" –
CO – L96I79 CO L97A79
Threaded connections Option code
NPS – 1/2" NPT 3/4" NPT 1" NPT
XN – V70 V77 V71
Starting from 15 psig the safety valve is certifi ed acc. to ASME Code Sec. VIII, Div. 1.1) p depends on the maximum allowable pressure of the inlet connection.*) LEOS/G = LESER Effective Orifi ce steam/gas; LEOL = LESER Effective Orifi ce liquids.
Vulcanized soft seal
4841.769x1.5 – 232 psig
Soft seal, O-ring
4841.768x233 – 968 psig
Typ
e 4
81
149
Clean ServiceClean Service
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Type 483
Valve size Depends on actual connection, see belowActual Orifi ce diameter d0 [mm] 13 25
Actual Orifi ce area A0 [inch2] 0.206 0.761API Orifi ce designation D E
API eff. Orifi ce area [inch2] 0.110 0.196Weight [lb] 3.5 8.2
Body material: 316L
Bonnet
closedH2 Art. No. 4834. 7702 7712
$1,670 $2,370
H4 Art. No. 4834. 7704 7714 $1,755 $2,505
H8 Art. No. 4834. 7708 7718 $2,853 $4,228
p [psig] S/G/L 4.4 – 232 1.5 – 232
Options
Adaptor forlift indicator
Bonnet J38 $172 $172
Lift indicator J93 $516 $516
Lifting device Double piston design
H8 J41 $275 $447
Test gagH4 J69 – –
H2 J70 $138 $138
O-ring disc
FFKM J20 $206 $206
EPDM J22 * *FKM J23 $34 $34
LESER Surface packageB53 * *Clean fi nish Inlet Ra 30 μinch
LESER Surface packageB54 $344 $344
HyClean fi nish Inlet Ra 30 μinch
LESER Surface packageB55 $723 $723
Sterile fi nish Inlet Ra 15 μinch
Marking with stainless steel tag M29 $28 $28
Available connections Inlet Outlet Inlet Outlet
d0 [mm] 13 25
NPS 1" 11/2" 11/2" 11/2" 2" 2"
Clamp Option code
BO I75I79 I75I80 I76A80 I75I80 I75I81 I76A81
CO L96I79 L96I80 L97A80 L96I80 L96I81 L97A81
Starting from 15 psig the safety valve is certifi ed acc. to ASME Code Sec. VIII, Div. 1.
All prices in $
Typ
e 4
83
150
Clean ServiceClean ServiceAll prices in $
Type 484
Actual Orifi ce diameter d0 [mm] 13 25
Actual Orifi ce area A0 [inch2] 0.206 0.761
API Orifi ce designation D E
API eff. Orifi ce area [inch2] 0.110 0.196
Weight [lb] 7 9
Body material: 316L
Bonnet
closedH2 Art. No. 4844. 7722 7732
$4,818 $7,022
H4 Art. No. 4844. 7724 7734 $4,902 $7,157
H8 Art. No. 4844. 7728 7738 $6,001 $8,880
p [psig] S/G/L 4.4 – 232 1.5 – 232
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Starting from 15 psig the safety valve is certifi ed acc. to ASME Code Sec. VIII, Div. 1.
Options
Adaptor forlift indicator
J38 $172 $172
Lift indicator J93 $516 $516
Lifting device Double piston design
H8 J41 $275 $447
Test gagH4 J69 – –
H2 J70 $138 $138
O-ring discFFKM J20 $155 $155
EPDM J22 * *LESER Surface package
B56 * *Clean fi nish Inlet Ra 30 inch
LESER Surface packageB57 $585 $585
HyClean fi nish Inlet Ra 20 inch
LESER Surface packageB58 $860 $860
Sterile fi nish Inlet Ra 15 inch
Marking with stainless steel tag M29 $28 $28
Available connections Outlet
d0 [mm] 13 25
NPS 11/2" 2"
Tri-Clamp® Option code
CO L97A80 L97A81
Typ
e 4
84
Vessel fl ange Type 5034in addition to valve order
151
Clean ServiceClean ServiceAll prices in $
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Type 5034 Vessel fl ange, dead space free
Safety valve size d0 [mm] 13 25
A0 [inch2] 0.206 0.206
Body material: 316L
Wall thickness
of the vessel
t ≤ 5 mm Art. No. 5034. 0980 0982
t ≤ 0.2 inch $978 $1,245
Wall thickness
of the vessel
t > 5 mm Art. No. 5034. 0981 0983
t > 0.2 inch $1,113 $1,420
Options
LESER Surface package Clean fi nish
B59 * *LESER Surface package HyClean fi nish
B60 $379 $379
LESER Surface package Sterile fi nish
B61 $447 $447
Typ
e 5
03
4
152
Clean ServiceClean Service
Type 485
Actual Orifi ce diameter d0 [mm] 13 25
Actual Orifi ce area A0 [inch2] 0.206 0.761
API Orifi ce designation D E
API eff. Orifi ce area [inch2] 0.110 0.196
Weight [lb] 7 11
Body material: 316L
Bonnet
closedH2 Art. No. 4854. 7742 7752
$5,267 $7,252
H4 Art. No. 4854. 7744 7754 $5,352 $7,386
H8 Art. No. 4854. 7748 7758 $6,451 $9,110
p [psig] S/G/L 4.4 – 232 1.5 – 232
Starting from 15 psig the safety valve is certifi ed acc. to ASME Code Sec. VIII, Div. 1.
Options
Adaptor forlift indicator
J38 $172 $172
Lift indicator J93 $516 $516
Lifting device Double piston design
H8 J41 $275 $447
Test gagH4 J69 – –
H2 J70 $138 $138
O-ring discFFKM J20 $155 $155
EPDM J22 * *LESER Surface package
B62 * *Clean fi nish Inlet Ra 30 inch
LESER Surface packageB63 $585 $585
HyClean fi nish Inlet Ra 20 inch
LESER Surface packageB64 $860 $860
Sterile fi nish Inlet Ra 15 inch
Marking with stainless steel tag M29 $28 $28
All prices in $
Typ
e 4
85
Integrated pipework connection Type 5034in addition to valve order
153
Clean ServiceClean Service
Type 5034 Integrated pipework connection, dead space free
Safety valve size d0 [mm] 13 25
A0 [inch2] 0.206 0.761
Nominal pipe size tube NPS 1" 11/2" 2"
Body material: 316L
OD-tube, Pipe standard
ISO 2037
Art. No. 5034. 0994 0995 0996 $1,817 $2,215 $2,482
ØA x t 1" x 1/16" 11/2" x 1/16" 2" x 1/16"
Pipe standard
DIN EN ISO 1127
Art. No. 5034. 0998 0999 – $1,817 $2,215
ØA x t 15/16" x 3/32" 129/32" x 3/32"–
Options
LESER Surface gradeClean fi nish
B65 * *LESER Surface grade HyClean fi nish
B66 $447 $447
LESER Surface grade Sterile fi nish
B67 $516 $516
All prices in $
Typ
e 5
03
4
154
Type 488 HyTight
Valve size Depends on actual connection see below
Actual Orifi ce diameter d0 [mm] 23 37 46 60 74 92
Actual Orifi ce area A0 [inch2] 0.644 1.667 2.576 4.383 6.666 10.304
API Orifi ce designation F H K L N P
API eff. Orifi ce area [inch2] 0.307 0.785 1.838 2.853 4.430 6.380
Weight [lb] 20 44 48 58 104 123
Body material: 316L
Bonnet
closedH2 Art. No. 4884. 8842 8852 8862 8872 8882 8892
$3,927 $5,285 $6,171 $7,704 $10,174 $13,386
H4 Art. No. 4884. 8844 8854 8864 8874 8884 8894 $4,062 $5,487 $6,374 $7,907 $10,443 $13,656
H8 Art. No. 4884. 8848 8858 8868 8878 8888 8898 $5,786 $7,480 $8,366 $9,899 $12,708 $15,922
p [psig] S/G/L 1.5 – 232 1.5 – 232 3 – 217 1.5 – 150 1.5 – 150 1.5 – 118
Obsolete models replaced by Type 488 HyTight
Design 2002 Art. No. 4884. 802X 804X 805X 806X 807X 808X
Art. No. 4484. 750X 752X 753X 754X 755X 756X
All prices in $
HyTight Assembly
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
For liquids starting from 15 psig the safety valve is certifi ed acc. to ASME Code Sec. VIII, Div. 1.For steam/gas starting from 20 psig the safety valve is certifi ed acc. to ASME Code Sec. VIII, Div. 1.
Typ
e 4
88
Clean ServiceClean Service
155
Clean ServiceClean ServiceAll prices in $
Options
O-ring discHyTight
CR Neoprene® “K” J21 * * * * * *EPDM Buna-EP® “D” J22 * * * * * *FPM/FKM Viton® “L” J23 * * * * * *FFKM Kalrez® “C” J20 $379 $757 $1,118 $1,376 $1,720 $2,237
Adaptor for lift indicator
Bonnet J38 $172 – – – – –
H4 J39 – $172 $172 $172 $172 $172
H8 J40 – $172 $172 $172 $172 $172
Lift indicator J93 $516 $516 $516 $516 $516 $516
Test gagH4 J69 – $138 $138 $138 $138 $138
H2 J70 $138 $138 $138 $138 $138 $138
Lifting device Double piston design
H8 J41 $447 $551 $551 $551 $654 $654
LESER Surface packageB68 * * * * * *Clean fi nish Inlet Ra 30 inch
LESER Surface packageB69 $206 $310 $413 $551 $688 $860
HyClean fi nish Inlet Ra 30 inch
LESER Surface packageB70 $585 $860 $1,204 $1,548 $1,893 $2,409
Sterile fi nish Inlet Ra 15 inch
Marking with stainless steel tag M29 $28 $28 $28 $28 $28 $28
d0 [mm] 23 37 46 60 74 92
Tri-Clamp®1) – CO x CO connections
Inlet L96 NPS 11/2" 2" 21/2" 3" 4" 4" 2)
Outlet L97 NPS 2" 3" 4" 4" 2) 5" 2) 6" 2)
Clamp – BO x BO connections
Inlet I75 NPS 11/2" 2" 21/2" 3" 4" 4" 2)
Outlet I76 NPS 2" 3" 4" 4" 5" 6" 2)
Flange connection – CL150 FA x FA
Inlet L94 NPS 1" 11/2" 2" 21/2" 3" 4"
Outlet L95 NPS 11/2" 21/2" 3" 4" 5" 6"
1) LESER’s Tri-Clamp® connections provided with the Type 488 are designed according to ISO 2852 and are compatible with Tri-Clover Tri-Clamp® connections for the most common sizes. Tri-Clamp® connection size designations are LESER designations. For detailed dimensions and selection refer to catalog.
2) For 4", 5" and 6" sizes, an additional fi tting is required to fi t standard Tri-Clamp connections. Please contact LESER LLC for details.
Note: Only certain connection combinations are kept in Charlotte stock. Please see page 193 "Availability from Charlotte stock".
Cla
mp
co
nn
ec
tio
ns
156
Spare parts
Clean ServiceClean Service
Type 481
Actual Orifi ce diameter d0 [mm] 10
Actual Orifi ce area A0 [inch2] 0.122
Body (Item 1) Material-No. / Art. No.
Inlet CO Connection size 3/4" 1"body 316 L
–136.4669.9266
$447
Disc with vulcanized soft seal (Item 7) Material-No. / Art. No.
Disc 316L EPDM “D” 200.9049.9041
Buna-EP® $172
CR “K” 200.9049.9051
Neoprene® $172
FPM/FKM “L” 200.9049.9071
Viton® $172
NBR “N” 200.9049.9081
Buna-N® $172
FFKM “C” 200.9049.9091
Kalrez® $447
Disc – Soft seal with O-ring (Item 7) Material-No. / Art. No.
Disc 316L EPDM “D” 200.8349.9741
e-polished Buna-EP® $138
CR “K” 200.8349.9751
Neoprene® $138
FPM/FKM “L” 200.8349.9771
Viton® $138
NBR “N” 200.8349.9781
Buna-N® $138
FFKM “C” 200.8349.9721
Kalrez® $447
O-ring – Soft seal (Item 7.4) Material-No. / Art. No.
O-ring EPDM “D” 502.0107.2641
Buna-EP® $21
CR “K” 502.0107.2651
Neoprene® $21
FPM/FKM “L” 502.0107.2671
Viton® $28
NBR “N” 502.0107.2681
Buna-N® $21
FFKM “C” 502.0107.2621
Kalrez® $241
All prices in $
Typ
e 4
81
Sp
are
pa
rts
157
Spare parts
Clean ServiceClean Service
Actual Orifi ce diameter d0 [mm] 13 25
Actual Orifi ce area A0 [inch2] 0.206 0.761
Disc – Soft seal with O-ring (Item 7) Material-No. / Art. No.
Disc 316L EPDM “D” 200.8149.9741 200.2549.9741
e-polished Buna-EP® $155 $206
FFKM “C” 200.8149.9721 200.2549.9721
Kalrez® $482 $516
Assembly tool for Aseptic O-ring disc Tool not required for this valve size
445.0139.0000
$275
O-ring – Soft seal (Item 7.4) Material-No. / Art. No.
O-ring EPDM “D” 502.0123.2641 502.0250.2641
Buna-EP® $21 $21
CR “K” 502.0123.2651 502.0250.2651
Neoprene® $21 $21
FPM/FKM “L” 502.0123.2671 502.0250.2671
Viton® $28 $28
NBR “N” 502.0123.2681 502.0250.2681
Buna-N® $21 $21
FFKM “C” 502.0123.2621 502.0250.2621
Kalrez® $379 $379
Pin / Split ring (Item 14) Material-No. / Art. No.
Pin / Spindle Ø [mm] 8 12Split ring Stainless steel / 316L 480.0405.0000 251.0149.0000
$7 $7
Pin (Item 57) Material-No. / Art. No.
Pin Ø [mm] 3 3
Stainless steel 480.0405.0000 480.0405.0000
$7 $7
O-ring body / guide (Item 60) Material-No. / Art. No.
O-ring EPDM “D” 502.0460.3041 502.0600.3041
Buna-EP® $28 $28
Ball (Item 61) Material-No. / Art. No.
Ball Ø [mm] 6 6
316L 510.0104.0000 510.0104.0000
$14 $14
Bellows (Item 70) Material-No. / Art. No.
Bellows EPDM “D” 224.2349.9000 224.2449.9000
Buna-EP® $172 $206
Type 483, 484, 485
All prices in $
Sp
are
pa
rts
158
Clean ServiceClean Service
Actual Orifi ce diameter d0 [mm] 23 37 46 60 74 92 Actual Orifi ce area A0 [inch2] 0.644 1.667 2.576 4.383 6.666 10.304
Art. No. 4884. 884X 885X 886X 887X 888X 889X
Disc – Soft seal (Item 7) Material-No. / Art. No.
Disc 316L EPDM “D” 205.3549.9741 205.3649.9741 205.3749.9741 205.3869.9741 205.3969.9741 205.4069.9741
e-polished Buna-EP® $310 $447 $551 $723 $946 $1,204 CR “K” 205.3549.9751 205.3649.9751 205.3749.9751 205.3849.9751 205.3949.9751 205.4049.9751
Neoprene® $310 $447 $551 $723 $946 $1,204 FPM/FKM “L” 205.3549.9771 205.3649.9771 205.3749.9771 205.3849.9771 205.3949.9771 205.4049.9771
Viton® $310 $447 $551 $723 $946 $1,204 FFKM “C” 205.3549.9791 205.3649.9791 205.3749.9791 205.3849.9791 205.3949.9791 205.4049.9791
Kalrez® $551 $946 $1,462 $1,893 $2,581 $3,613 O-ring – Soft seal (Item 7.4) Material-No. / Art. No.
O-ring EPDM “D” 502.0249.3541 502.0408.3541 502.0503.3541 502.0660.5341 502.0819.5341 502.1041.5341
Buna-EP® $28 $28 $28 $28 $28 $28 CR “K” 502.0249.3551 502.0408.3551 502.0503.3551 502.0660.5351 502.0819.5351 502.1041.5351
Neoprene® $21 $21 $21 $28 $28 $28 FPM/FKM “L” 502.0249.3571 502.0408.3571 502.0503.3571 502.0660.5371 502.0819.5371 502.1041.5371
Viton® $28 $41 $69 $138 $172 $241 FFKM “C” 502.0249.3591 502.0408.3591 502.0503.3591 502.0660.5391 502.0819.5391 502.1041.5391
Kalrez® $241 $482 $946 $1,204 $1,720 $2,409
Type 488 HyTight
Spare parts
Typ
e 4
88
HyT
igh
t
Sp
are
pa
rts
All prices in $
HyTight Assembly
159
Clean ServiceClean Service
Actual Orifi ce diameter d0 [mm] 23 37 46 60 74 92 Actual Orifi ce area A0 [inch2] 0.644 1.667 2.576 4.383 6.666 10.304
Art. No. 4884. 884X 885X 886X 887X 888X 889X
Split ring (Item 14) Material-No. / Art. No.
Split ring Spindle Ø [mm] 12 16 16 16 20 20316 L 251.0149.0000 251.0249.0000 251.0249.0000 251.0249.0000 251.0349.0000 251.0349.0000
$7 $7 $7 $7 $7 $7 Pin (Item 57) Material-No. / Art. No.
Pin Ø [mm] 3 4 4 5 5 5Stainless steel 480.3205.0000 480.1605.0000 480.1605.0000 480.3005.0000 480.3105.0000 480.3105.0000
$7 $7 $7 $7 $7 $7 O-ring body / guide (Item 60) Material-No. / Art. No.
O-ring EPDM “D” 502.0600.3041 502.0850.4041 502.0850.4041 502.1130.4041 502.1380.4041 502.1580.5041
Buna-EP® $28 $28 $28 $28 $28 $28 Ball (Item 61) Material-No. / Art. No.
Ball Ø [mm] 6 9 9 12 12 15316L 510.0104.0000 510.0204.0000 510.0204.0000 510.0304.0000 510.0304.0000 510.0404.0000
$7 $7 $7 $21 $21 $34 Bellows (Item 70) Material-No. / Art. No.
Bellows EPDM “D” 224.2849.9000 224.2949.9000 224.2949.9000 224.2649.9000 224.2649.9000 224.2649.9000
Buna-EP® $206 $241 $241 $344 $344 $344
Type 488 HyTight
Spare parts
Typ
e 4
88
HyT
igh
t
Sp
are
pa
rts
All prices in $
160
Clean ServiceClean ServiceAvailable options
Ava
ila
ble
op
tio
ns
O-ring disc
J22: EPDM “D”
J21: CR “K”J23: FKM “L” J30: NBR “N”J20: FFKM “C”
Vulcanized soft seal
Type 481: 0,1 – 16 barJ22: EPDM “D”
J21: CR “K”J23: FKM “L” J30: NBR “N” J20: FFKM “C”
Lift indicator placed in bonnet
Type 483, 484, 485, 488 (1")J38 + J93
Lift indicatorr H4
Type 483 (Orifice 1.667 – 10.3)J39 + J93
Lift indicator H8
Type 488 (Orifice 1.667 – 10.3)J40 + J93
Elastomer bellows
EPDM “D”FFKM “C”
Packed lever H4
Type 488
Packed knob H4
Test gag
J70: H2Test gag
Type 488J69: H4
Special material
2.4610 Hastelloy® C42.4360 Monel® 4001.4462 Duplex
Wide range of aseptic
connections
- Dairy industry coupling- Sterile screw coupling- Small flange- Clamp
Pneumatic lifting device H8
Single pistonPneumatic lifting device H8
J41: Double piston design Screwed cap H2
H2
CodeYYYY
CodeXXXX
CodeZZZZ
161
Cri
tic
al
Se
rvic
e
Safety Relief Valves
Types Page
• Type 447 162
• Available options 164
CriticalServiceCriticalService
162
Type 447
Valve size 1" x 2" 2" x 3" 3" x 4" 4" x 6"
Actual Orifi ce diameter d0 [mm] 23 46 60 92
Actual Orifi ce area A0 [inch2] 0.644 2.576 4.383 10.304
API Orifi ce designation F J L P
API eff. Orifi ce area [inch2] 0.307 1.838 2.853 6.380
Weight [lb] 33 64 110 231
Body material: WCB
CL150
Bonnet
closedH2 Art. No. 4472. 3872 3882 3892 3902
$6,276 $8,045 $11,716 $18,759
H4 Art. No. 4472. 3874 3884 3894 3904 $6,448 $8,219 $11,991 $19,033
p [psig] S/G/L 1.5 – 2301) 1.5 – 145 (230)1) 1.5 – 145 (230)1) 1.5 – 145 (230)1)
All prices in $
Flange class, inlet: CL150Flange class, outlet: CL150
Starting from 15 psig the safety valve is certifi ed acc. to ASME Code Sec. VIII, Div. 1.
Typ
e 4
47
Nominal diameter Set pressure [bar] Option code
DN 25 12.01 – 16 S05 + S07
DN 50 10.01 – 16 S05 + S07 + S54
DN 80 10.01 – 16 S05 + S07 + S54
DN 100 10.01 – 16 S05 + S07 + S54
0
250
0
50
100
150
200
30 120 210 300 480390
2
4
6
8
10
12
14
16
18
200150100500 250
Temperature [°F]
Set
pre
ssur
e [b
ar]
Temperature [°C]
I Set
pre
ssur
e [p
sig]
Pressure temperature ratings
II
III
1) The pressure / temperature functional ranges of Type 447 are dependent on the PTFE components in the safety valve. The chart shows the application ranges for:
I Standard safety valve with PTFE nozzle and sealing plate made of BOROFLOAT glass
II Design for pressures above 10 bar or 12 bar:Safety valve with metallic nozzle and sealing plate of Hastelloy®, nickel-base alloys, etc.
III Safety valve with metallic nozzle, sealing plate and lifting aid of Hastelloy®, nickel-base alloys, etc.
Additional order codes are required for ordering
1"
2", 3", 4"
Critical ServiceCritical Service
163
Critical ServiceCritical Service
Options Type 447
Valve size 1" x 2" 2" x 3" 3" x 4" 4" x 6"
Actual Orifi ce diameter d0 [mm] 23 46 60 92
Actual Orifi ce area A0 [inch2] 0.644 2.576 4.383 10.304
Special machining of fl ange per fl ange $172 $172 $275 $275
Nozzle in material HC4 on request
Disc sealing platein material
HC4 on request
Test gagH4 J69 $138 $138 $138 $138
H2 J70 $138 $138 $138 $138
Sparc testDIN 28055-2
$103 $103 $103 $103 EN 10204 2.2
Adaptor for lift indicator H4 J39 $172 $172 $172 $172
Lift indicator J93 $516 $516 $516 $516
Marking with stainless steel tag M29 $28 $28 $28 $28
All prices in $
Typ
e 4
47
Valve size 1" x 2" 2" x 3" 3" x 4" 4" x 6"
Inlet body (Item 1)
1.0570/PTFE 118.2929.9108 118.2829.9108 118.2529.9108 118.2729.9108
$2,237 $3,957 $6,194 $7,226
Nozzle (Item 5)
PTFE/25% glass 207.0659.0000 207.1159.0000 207.1659.0000 207.0359.0000
$654 $826 $1,204 $1,893
Disc including bellows complete (Item 7)
PTFE/Borofloat glass 200.2959.0000 200.3059.0000 200.3359.0000 200.3159.0000
$1,720 $2,237 $3,785 $4,473
Bellows (Item 7.1)
PTFE 224.1659.0000 224.1759.0000 224.2259.0000 224.1559.0000
$1,204 $1,462 $2,409 $2,753
Spare parts
164
Critical ServiceCritical ServiceAvailable options
Ava
ila
ble
op
tio
ns
Lift indicator
J39: Adaptor for lift indicator H4J93: Lift indicator
Packed lever H4
H4 Screwed cap H2
H2Special material
2.4610 Hastelloy® C4
CodeYYYY
CodeXXXX
CodeZZZZ
165
Flange Safety Relief Valves
Series 433 Page
• Type 431, 433 166
• LESER Original Spare Parts Kits 167
• Available options 168
ModulateActionModulateAction
Mo
du
late
Ac
tio
n
166 LESER reserves the right to charge an extra amout (alloy charge) for stainless steel valves
Modulate ActionModulate Action
Type 431, 433
Disc O-ring Steel
Valve size 1/2" x 1/2" 1/2" x 1/2" 3/4" x 3/4" 1" x 1" 11/4" x 11/4" 11/2" x 11/2" 2" x 2" 21/2" x 21/2" 3" x 3" 4" x 4" 5" x 5" 6" x 6"
Actual Orifi ce diameter d0 [mm] 12 12 18 18 18 23 29 37 46 60 74 92
Actual Orifi ce area A0 [inch2] 0.175 0.175 0.394 0.394 0.394 0.644 1.024 1.667 2.576 4.383 6.666 10.304
Weight [lb] 11 11 14 14 18 20 27 34 45 74 108 146
Body material: Ductile Gr. 60-40-18
CL150 / CL300
Bonnet
closedH2 Art. No. 4335. 8532 8752 8762 8772 8782 8792 8802 8812 8822 8832 – –
$821 $694 $701 $716 $827 $926 $1,089 $1,403 $1,716 $2,522
H3 Art. No. 4335. 8533 8753 8763 8773 8783 8793 8803 8813 8823 8833 – –
$930 $804 $810 $824 $936 $1,034 $1,197 $1,596 $1,912 $2,718
H4 Art. No. 4335. 8534 8754 8764 8774 8784 8794 8804 8814 8824 8834 – –
$1,056 $930 $936 $951 $1,064 $1,161 $1,323 $1,791 $2,106 $2,911 Bonnet
openH3 Art. No. 4315. 8535 8755 8765 8775 8785 8795 8805 8815 8825 8835 – –
$930 $804 $810 $824 $936 $1,034 $1,197 $1,596 $1,912 $2,718
p [psig] S/G/L 3 – 580 580 580 580 580 580 580 507 (580) 507 435 – –
Body material: WCB
CL150 / CL300
Bonnet
closedH2 Art. No. 4332. 8512 4122 4142 4152 4162 4172 4182 4192 4202 4212 4222 4232
$1,161 $1,034 $1,056 $1,073 $1,114 $1,257 $1,533 $1,917 $2,521 $3,783 $5,313 $7,641
H3 Art. No. 4332. 8513 4123 4143 4153 4163 4173 4183 4193 4203 4213 4223 4233 $1,270 $1,143 $1,164 $1,182 $1,222 $1,368 $1,643 $2,112 $2,717 $3,978 $5,583 $7,912
H4 Art. No. 4332. 8514 4124 4144 4154 4164 4174 4184 4194 4204 4214 4224 4234 $1,395 $1,270 $1,291 $1,310 $1,348 $1,494 $1,769 $2,307 $2,911 $4,173 $5,935 $8,263
Bonnet
openH3 Art. No. 4312. 8515 4125 4145 4155 4165 4175 4185 4195 4205 4215 4225 4235
$1,270 $1,143 $1,164 $1,182 $1,222 $1,368 $1,643 $2,112 $2,717 $3,978 $5,583 $7,912
p [psig] S/G/L 3 – 580 580 580 580 580 580 580 507 (580) 507 435 464 232
Body material: CF8M
CL150 / CL300
Bonnet
closedH2 Art. No. 4334. 8522 4252 4272 4282 4292 4302 4312 4322 4332 4342 – –
$2,242 $2,117 $2,137 $2,246 $2,820 $3,219 $3,714 $5,406 $6,234 $9,698
H4 Art. No. 4334. 8524 4254 4274 4284 4294 4304 4314 4324 4334 4344 – – $2,944 $2,817 $2,839 $2,947 $3,523 $3,919 $4,415 $6,419 $7,247 $10,711
p [psig] S/G/L 3 – 580 580 580 580 580 580 458 (580)293 (377) 362 319 – –
All prices in $
Typ
e 4
31,
433
167
Modulate ActionModulate Action All prices in $
Options Type 431, 433
Disc O-ring Steel
Valve size 1/2" x 1/2" 1/2" x 1/2" 3/4" x 3/4" 1" x 1" 11/4" x 11/4" 11/2" x 11/2" 2" x 2" 21/2" x 21/2" 3" x 3" 4" x 4" 5" x 5" 6" x 6"
Actual Orifi ce diameter d0 [mm] 12 12 18 18 18 23 29 37 46 60 74 92
Actual Orifi ce area A0 [inch2] 0.175 0.175 0.394 0.394 0.394 0.644 1.024 1.667 2.576 4.383 6.666 10.304
Weight [lb] 11 11 14 14 14 18 20 27 34 74 108 146
Special machining of fl ange per fl ange $172 $172 $172 $172 $172 $172 $172 $275 $275 $275 $275 $516
O-ring disc
CR “K” J21
* – $120 $120 $120 $120 $155 $155 $155 $275 $275 $447 Neoprene®
EPDM “D” J22
* – $120 $120 $120 $120 $155 $155 $155 $275 $275 $447 Buna-EP®
FPM/FKM “L” J23
* – $120 $120 $120 $120 $155 $155 $155 $275 $275 $447 Viton®
FFKM “C” J20 $379 – $379 $379 $379 $379 $619 $619 $619 $1,376 $1,376 $2,237
Kalrez®
Lift stopper J51 – – x x x x $275 $275 $275 $413 $413 $413
Drain holeG 1/4 J18 $69 $69 $69 $69 $69 $69 $69 $69 $69 x x x
G 1/2 J19 x x x x x x x x x $69 $69 $69
Stainless steel bellows
433 J78 $482 $482 $482 $482 $482 $482 $946 $946 $946 $1,548 $1,548 $2,753
431 J68
$585 $585 $585 $585 $585 $585 $1,118 $1,118 $1,118 $1,893 $1,893 $3,441
O-ring damperH2 J65 $379 $379 – $379 $379 $379 $379 $379 $379 $379 $379 $379
7 – 580 7 – 580 – 7 – 580 7 – 580 7 – 580 7 – 580 7 – 508 7 – 508 7 – 435 – –
O-ring damperH4 J66 $447 $447 – $447 $447 $447 $447 $447 $447 $447 $447 $447
7 – 580 7 – 580 – 7 – 580 7 – 580 7 – 580 7 – 580 7 – 508 7 – 508 7 – 435 – –
Heating jacket for body
4312 $1,893 $1,893 $1,893 $1,893 $2,409 $2,409 $2,409 $3,097 $3,097 – – –
4332
4334 $1,548 $1,548 $1,548 $1,548 $1,893 $1,893 $1,893 $2,409 $2,409 – – –
Heating jacket spacer H33 $1,204 $1,204 $1,204 $1,204 $1,204 $1,204 $1,204 $1,204 $1,204 – – –
High temperature alloy spring
1.8159X01 $34 $34 $34 $34 $34 $34 $34 $86 $86 $86 * *1.7102
Stainless steel spring 1.4310 X04 $34 $34 $34 $34 $34 $34 $34 $155 $155 $172 $172 $688
Free of oil and grease J85 $310 $310 $310 $310 $310 $310 $310 $516 $860 $860 $860 $860
pressure range p [psig]
pressure range p [psig]
pressure range p [psig]
Typ
e 4
31,
433
The LESER Spare Parts Kits contain all the parts recommended for the regular maintenance of a LESER safety valveContents
Item Component Material Quantity Item Component Material Quantity
7.5 Securing ring (Disc) 1.4571 / 316Ti 1 59 Securing ring (Split ring) 1.4571 / 316Ti 1
8.4 Securing ring (Guide) 1.4571 / 316Ti 1 60 GasketGraphite / 1.4401
Graphite / 3163
14 Split ring 1.4404 / 316L 2 61 Ball 1.4401 / 316 1
40.3 Spacer 1.4571 / 316Ti 3 1.9 O-ring (Lifting device H4) FKM 1
57 Pin 1.4310/Stainless steel 1
Spare Parts Kits
DN 15 – 25 25 32 40 50 65 80 100 125 150
Art. No. 5012. 1201 1201 1201 1201 1212 1213 1204 1214 1215 1216
$56 $56 $56 $56 $56 $69 $56 $69 $138 $207
LESER Original Spare Parts Kits – Type 427/429, 431/433
168
Modulate ActionModulate ActionAvailable options
Ava
ila
ble
op
tio
ns
Open bonnet
See Art. No.
Lift indicator
J39: Adaptor for lift indicator H4J93: Lift indicator
O-ring damper H2
J65
Disc with inserted sealing plate
J44: PTFE-FDA “A”J48: PCTFE “G”J49: SP “T”
Stainless steel bellows
J68: Open bonnetJ78: Closed bonnet
Conversion kit for
stainless steel bellows
On request
Plain lever H3
H3
Test gag
J69: H4J70: H2
O-ring damper H4
J66
Drain hole
J18: G 1/4 J19: G 1/2
O-ring disc
J21: CR Neoprene® “K” J22: EPDM Buna-EP® “D”J23: FPM/FKM Viton® “L”J20: FFKM Kalrez® “C”
Packed lever H4
H4 Screwed cap H2
H2
Heating jacket
H29, H30: Couplings 3/8", 3/4"K31, K32: Flanges 1/2" CL150, 1" CL150
Type 433 Refrigeration techno-
logy
H91: Outlet groove face DH93: Inlet groove face D
169
Se
rie
s 3
10
Change-over valves
Types Page
• Type 310 150
Series 310Series 310
170
All prices in $
LESER reserves the right to charge an extra amount (alloy charge) for stainless steel valves
Series 310Series 310Typ
e 3
10
1) For change-over valve combinations same fl ange pressure ratings must be used for inlet and outlet2) Change-over valve with welded fl ange
Options Type 310
DN 25 40 50 65 80 100 1252)
Valve size 1" 1 1/2" 2" 2 1/2" 3" 4" 5"
Special machining of fl ange1) per fl ange $62 $69 $103 $120 $138 $172 $241
RTJ-groove Y85, Y86 $155 $172 $206 $275 $310 $344 $516
Drain hole with lock screw EN 10204-3.1
2 x G1/4 Y99 $172 $172 $172 $172 $172 $172 $172
2 x G1/2 Y49 – – – – – – –
2 x NPT1/4" Z99 $172 $172 $172 $172 $172 $172 $172
2 x NPT1/2" Z49 – – – – – – –
Flushing hole (without lock screw)
1.0619 (WCB) G1/2 Y38 $516 $516 $516 $516 $516 $516 $516
NPT1/2" Z38 $516 $516 $516 $516 $516 $516 $516
1.6220 (LCB/LCC) G1/2 Y38 $619 $619 $619 $619 $619 $619 $619
NPT1/2" Z38 $619 $619 $619 $619 $619 $619 $619
1.4408 (CF8M) G1/2 Y38 $1,204 $1,204 $1,204 $1,204 $1,204 $1,204 $1,204
NPT1/2" Z38 $1,204 $1,204 $1,204 $1,204 $1,204 $1,204 $1,204
Lock screw EN 10204-3.1
2 x G1/2 $241 $241 $241 $241 $241 $241 $241
2 x NPT1/2" $241 $241 $241 $241 $241 $241 $241
Free of oil and grease J85 $723 $1,032 $1,118 $1,376 $1,634 $1,893 $2,065
Bypass with non return valves
1.0619 (WCB) 2 Valves PN 40 Y39 $3,441 $3,441 $3,441 $3,441 $3,441 $3,441 $3,441
1.6220 (LCB/LCC) 2 Valves PN 40 Y39 $5,678 $5,678 $5,678 $5,678 $5,678 $5,678 $5,678
1.4408 (CF8M) 2 Valves PN 40 Y39 $6,194 $6,194 $6,194 $6,194 $6,194 $6,194 $6,194
Type 310
DN 25 40 50 65 80 100 1252)
Valve size 1" 11/2" 2" 21/2" 3" 4" 5"
Weight [kg] Gland construction 25 46 48 99 99 151 156Bellows construction 28 50 50 109 109 161 166
Body material: 1.0619 (WCB)
PN 40 (CL150 – 300)1)
Gland construction Art. No. 3102. 9320 9340 9350 9360 9370 9380 9390 $2,627 $4,110 $4,607 $6,626 $7,351 $9,439 $13,799
Bellows construction Art. No. 3102. 9321 9341 9351 9361 9371 9381 9391 $3,146 $4,709 $5,319 $7,595 $8,540 $10,852 $15,286
Body material: 1.6620 (LCB/LCC)
PN 40 (CL150 – 300)1)
Gland construction Art. No. 3103. 9220 9240 9250 9260 9270 9280 9290 $3,400 $5,230 $5,754 $8,106 $9,154 $12,029 $17,259
Bellows construction Art. No. 3103. 9221 9241 9251 9261 9271 9281 9291 $3,923 $6,015 $6,538 $9,414 $10,460 $13,599 $18,830
Body material: 1.4408 (CF8M)
PN 40 (CL150 – 300)1)
Gland construction Art. No. 3104. 9420 9440 9450 9460 9470 9480 9490 $4,430 $7,610 $8,342 $13,803 $14,843 $18,746 $26,300
Bellows construction Art. No. 3104. 9421 9441 9451 9461 9471 9481 9491 $5,019 $8,301 $9,155 $15,180 $16,527 $20,769 $28,593
171
Series 310Series 310All prices in $
Typ
e 3
10
1) For change-over valve combinations same fl ange pressure ratings must be used for inlet and outlet2) Delivery time 42 weeks
Options Type 310
DN 150 200 250 300 400 500
Valve size 6" 8" 10" 12 16" 20"
Special machining of fl ange1) per fl ange $241 $379 $482 $723 $1,376 $1,893
RTJ-groove Y85, Y86 $516 $757 $946 $1,462
Drain hole with lock screw EN 10204-3.1
2 x G1/4 Y99 $172 $172 – – – –
2 x G1/2 Y49 – – $379 $379 $379 $379
2 x NPT1/4" Z99 $172 $172 – – – –
2 x NPT1/2" Z49 – – $379 $379 $379 $379
Flushing hole (without lock screw)
1.0619 (WCB) G1/2 Y38 $516 $516 $516 $516 $516 $516
NPT1/2" Z38 $516 $516 $516 $516 $516 $516
1.6220 (LCB/LCC) G1/2 Y38 $619 $619 $619 $619 $619 $619
NPT1/2" Z38 $619 $619 $619 $619 $619 $619
1.4408 (CF8M) G1/2 Y38 $1,204 $1,204 $1,204 $1,204 $1,204 $1,204
NPT1/2" Z38 $1,204 $1,204 $1,204 $1,204 $1,204 $1,204
Lock screw EN 10204-3.1
2 x G1/2 $241 $241 $241 $241 $241 $241
2 x NPT1/2" $241 $241 $241 $241 $241 $241
Free of oil and grease J85 $2,409 $2,753 $3,957 $5,505 $11,699 $19,957
Bypass with non return valves
1.0619 (WCB) 2 Valves PN 40 Y39 $3,441 $3,441 $3,441 $3,441 $3,441 $3,441
1.6220 (LCB/LCC) 2 Valves PN 40 Y39 $5,678 $5,678 $5,678 $5,678 $5,678 $5,678
1.4408 (CF8M) 2 Valves PN 40 Y39 $6,194 $6,194 $6,194 $6,194 $6,194 $6,194
Type 310
DN 150 200 250 300 400 5002)
Valve size 6" 8" 10" 12 16" 20"
Weight [kg] Gland construction 323 667 850 950Bellows construction 338 682 850 970
Body material: 1.0619 (WCB)
PN 40 (CL150 – 300)1) PN 25 (CL150)1)
Gland construction Art. No. 3102. 9910 9920 9620 9630 9640 9650 $15,698 $28,597 $50,681 $71,082 $125,670 $216,892
Bellows construction Art. No. 3102. 9911 9921 9621 9631 9641 9651 $17,526 $31,416 $53,145 $73,424 $131,777 $226,213
Body material: 1.6620 (LCB/LCC)
PN 40 (CL150 – 300)1) PN 25 (CL150)1)
Gland construction Art. No. 3103. 9930 9940 9720 9730 9740 9750 $19,351 $35,043 $62,763 $88,913 $156,906 on request
Bellows construction Art. No. 3103. 9931 9941 9721 9731 9741 9751 $22,012 $39,228 $65,378 $91,529 $183,060 on request
Body material: 1.4408 (CF8M)
PN 40 (CL150 – 300)1) PN 25 (CL150)1)
Gland construction Art. No. 3104. 9950 9960 9820 9830 9840 9850 $30,329 $54,465 $96,662 $131,021 $231,643 $392,932
Bellows construction Art. No. 3104. 9951 9961 9821 9831 9841 9851 $34,236 $58,844 $104,963 $145,493 $261,627 $428,915
172
All prices in $
Series 310Series 310Typ
e 3
10
Options Type 310
DN 25 40 50 65 80 100 1251)
Valve size 1" 1 1/2" 2" 2 1/2" 3" 4" 5"
Stop valve for pressure discharge
1.0619 (WCB) 2 Valves PN 40 Z41 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065
2 Valves PN 63 Z42 $4,301 $4,301 $4,301 $4,301 $4,301 $4,301 $4,301
2 Valves PN 100 Z43 $6,710 $6,710 $6,710 $6,710 $6,710 $6,710 $6,710
2 Valves PN 160 Z44 $8,602 $8,602 $8,602 $8,602 $8,602 $8,602 $8,602
2 Valves CL300 Z45 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065
2 Valves CL600 Z46 $6,710 $6,710 $6,710 $6,710 $6,710 $6,710 $6,710
2 Valves CL900 Z47 $8,602 $8,602 $8,602 $8,602 $8,602 $8,602 $8,602
1.6220 (LCB/LCC) 2 Valves PN 40 Z41 $4,129 $4,129 $4,129 $4,129 $4,129 $4,129 $4,129
2 Valves PN 63 Z42 $7,226 $7,226 $7,226 $7,226 $7,226 $7,226 $7,226
2 Valves PN 100 Z43 $9,291 $9,291 $9,291 $9,291 $9,291 $9,291 $9,291
2 Valves PN 160 Z44 $11,699 $11,699 $11,699 $11,699 $11,699 $11,699 $11,699
2 Valves CL300 Z45 $4,129 $4,129 $4,129 $4,129 $4,129 $4,129 $4,129
2 Valves CL600 Z46 $9,291 $9,291 $9,291 $9,291 $9,291 $9,291 $9,291
2 Valves CL900 Z47 $11,699 $11,699 $11,699 $11,699 $11,699 $11,699 $11,699
1.4408 (CF8M) 2 Valves PN 40 Z41 $4,989 $4,989 $4,989 $4,989 $4,989 $4,989 $4,989
2 Valves PN 63 Z42 $8,602 $8,602 $8,602 $8,602 $8,602 $8,602 $8,602
2 Valves PN 100 Z43 $11,355 $11,355 $11,355 $11,355 $11,355 $11,355 $11,355
2 Valves PN 160 Z44 $14,108 $14,108 $14,108 $14,108 $14,108 $14,108 $14,108
2 Valves CL300 Z45 $4,989 $4,989 $4,989 $4,989 $4,989 $4,989 $4,989
2 Valves CL600 Z46 $11,355 $11,355 $11,355 $11,355 $11,355 $11,355 $11,355
2 Valves CL900 Z47 $14,108 $14,108 $14,108 $14,108 $14,108 $14,108 $14,108
Lockable combination
hand and chain wheel Y35 $757 $826 $1,204 $1,204 $1,290 $1,290 $1,462
hand and chain wheel and chain Y36 $791 $860 $1,290 $1,290 $1,376 $1,376 $1,548
Locking device for the hand wheel
1.4404 (316L) Standard Z50 $791 $826 $826 $1,118 $1,118 $1,204 $1,204
1.4404 (316L) CO-Combination Z51 $1,032 $1,032 $1,032 $1,376 $1,376 $1,548 $1,548
Final position switch Y98 $1,462 $1,462 $1,462 $1,462 $1,462 $1,462 $1,462
Disc 1.4571/Stellite 6 $654 $1,032 $1,290 $1,548 $1,893 $2,409 $3,441
NACE MR0175 Material test certifi cate EN 10204-3.1
1.0619 (WCB) Z78 $1,290 $1,290 $1,290 $1,290 $1,290 $1,720 $1,720
1.6220 (LCB/LCC) Z78 $1,290 $1,290 $1,290 $1,290 $1,290 $1,720 $1,720
1.4408 (CF8M) Z78 $310 $310 $310 $310 $310 $379 $379
Material test certifi cate DIN EN 10204-3.1
Body / Flange elbow2) Y41 $120 $120 $120 $120 $120 $120 $120
Studs N08 $551 $551 $551 $551 $551 $551 $551
Nuts N07 $551 $551 $551 $551 $551 $551 $551
Needle valve gland design
1.0619 (WCB) 2 x G1/2 Z52 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065
2 x NPT1/2" Z53 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065
1.6220 (LCB/LCC) 2 x G1/2 Z52 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065
2 x NPT1/2" Z53 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065
1.4408 (CF8M) 2 x G1/2 Z52 $2,753 $2,753 $2,753 $2,753 $2,753 $2,753 $2,753
2 x NPT1/2" Z53 $2,753 $2,753 $2,753 $2,753 $2,753 $2,753 $2,753
1) Change-over valve with welded fl ange2) Prices are valid for the three body components together
173
Series 310Series 310All prices in $
Typ
e 3
10
Options Type 310
DN 150 200 250 300 400 500
Valve size 6" 8" 10" 12 16" 20"
Stop valve for pressure discharge
1.0619 (WCB) 2 Valves PN 40 Z41 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065
2 Valves PN 63 Z42 $4,301 $4,301 $4,301 $4,301 $4,301 $4,301
2 Valves PN 100 Z43 $6,710 $6,710 $6,710 $6,710 $6,710 $6,710
2 Valves PN 160 Z44 $8,602 $8,602 $8,602 $8,602 $8,602 $8,602
2 Valves CL300 Z45 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065
2 Valves CL600 Z46 $6,710 $6,710 $6,710 $6,710 $6,710 $6,710
2 Valves CL900 Z47 $8,602 $8,602 $8,602 $8,602 $8,602 $8,602
1.6220 (LCB/LCC) 2 Valves PN 40 Z41 $4,129 $4,129 $4,129 $4,129 $4,129 $4,129
2 Valves PN 63 Z42 $7,226 $7,226 $7,226 $7,226 $7,226 $7,226
2 Valves PN 100 Z43 $9,291 $9,291 $9,291 $9,291 $9,291 $9,291
2 Valves PN 160 Z44 $11,699 $11,699 $11,699 $11,699 $11,699 $11,699
2 Valves CL300 Z45 $4,129 $4,129 $4,129 $4,129 $4,129 $4,129
2 Valves CL600 Z46 $9,291 $9,291 $9,291 $9,291 $9,291 $9,291
2 Valves CL900 Z47 $11,699 $11,699 $11,699 $11,699 $11,699 $11,699
1.4408 (CF8M) 2 Valves PN 40 Z41 $4,989 $4,989 $4,989 $4,989 $4,989 $4,989
2 Valves PN 63 Z42 $8,602 $8,602 $8,602 $8,602 $8,602 $8,602
2 Valves PN 100 Z43 $11,355 $11,355 $11,355 $11,355 $11,355 $11,355
2 Valves PN 160 Z44 $14,108 $14,108 $14,108 $14,108 $14,108 $14,108
2 Valves CL300 Z45 $4,989 $4,989 $4,989 $4,989 $4,989 $4,989
2 Valves CL600 Z46 $11,355 $11,355 $11,355 $11,355 $11,355 $11,355
2 Valves CL900 Z47 $14,108 $14,108 $14,108 $14,108 $14,108 $14,108
Lockable combination
hand and chain wheel Y35 $1,634 $1,634 $2,065 $2,065 $2,065 $2,065
hand and chain wheel and chain Y36 $1,893 $1,893 $2,409 $2,409 $2,409 $2,409
Locking device for the hand wheel
1.4404 (316L) Standard Z50 $1,462 $2,065 $2,753 – – –
1.4404 (316L) CO-Combination Z51 $1,893 $2,409 $3,269 – – –
Final position switch Y98 $1,462 $1,462 $1,462 $1,462 $1,462 $1,462
Disc 1.4571/Stellite 6 $4,817 $5,850 $7,226 $8,602 $7,226 $8,602
NACE MR0175 Material test certifi cateEN 10204-3.1
1.0619 (WCB) Z78 $2,237 $2,237 $2,581 $2,581 $3,269 –
1.6220 (LCB/LCC) Z78 $2,237 $2,237 $2,581 $2,581 $3,269 –
1.4408 (CF8M) Z78 $516 $516 $585 $585 $757 –
Material test certifi cate DIN EN 10204-3.1
Body / Flange elbow1) Y41 $172 $344 $344 $344 $344 $344
Studs N08 $551 $551 $551 $551 $551 $551
Nuts N07 $551 $551 $551 $551 $551 $551
Needle valve gland design
1.0619 (WCB) 2 x G1/2 Z52 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065
2 x NPT1/2" Z53 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065
1.6220 (LCB/LCC) 2 x G1/2 Z52 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065
2 x NPT1/2" Z53 $2,065 $2,065 $2,065 $2,065 $2,065 $2,065
1.4408 (CF8M) 2 x G1/2 Z52 $2,753 $2,753 $2,753 $2,753 $2,753 $2,753
2 x NPT1/2" Z53 $2,753 $2,753 $2,753 $2,753 $2,753 $2,753
1) Prices are valid for the three body components together
174
All prices in $
Series 310Series 310Typ
e 3
10
Options Type 310
DN 25 40 50 65 80 100 1251)
Valve size 1" 1 1/2" 2" 2 1/2" 3" 4" 5"
Needle valve bellows design
1.0619 (WCB)2 x G1/2 PN40 – PN100/CL300 – 600
Z54 $3,269 $3,269 $3,269 $3,269 $3,269 $3,269 $3,269
2 x G1/2 PN160/CL900
Z55 $3,785 $3,785 $3,785 $3,785 $3,785 $3,785 $3,785
2 x NPT1/2" PN40 – PN100/CL300 – 600
Z56 $3,269 $3,269 $3,269 $3,269 $3,269 $3,269 $3,269
2 x NPT1/2" PN160/CL900
Z57 $3,785 $3,785 $3,785 $3,785 $3,785 $3,785 $3,785
1.6220 (LCB/LCC)2 x G1/2 PN40 – PN100/CL300 – 600
Z54 $3,269 $3,269 $3,269 $3,269 $3,269 $3,269 $3,269
2 x G1/2 PN160/CL900
Z55 $3,785 $3,785 $3,785 $3,785 $3,785 $3,785 $3,785
2 x NPT1/2" PN40 – PN100/CL300 – 600
Z56 $3,269 $3,269 $3,269 $3,269 $3,269 $3,269 $3,269
2 x NPT1/2" PN160/CL900
Z57 $3,785 $3,785 $3,785 $3,785 $3,785 $3,785 $3,785
1.4408 (CF8M)2 x G1/2 PN40 – PN100/CL300 – 600
Z54 $3,957 $3,957 $3,957 $3,957 $3,957 $3,957 $3,957
2 x G1/2 PN160/CL900
Z55 $4,473 $4,473 $4,473 $4,473 $4,473 $4,473 $4,473
2 x NPT1/2" PN40 – PN100/CL300 – 600
Z56 $3,957 $3,957 $3,957 $3,957 $3,957 $3,957 $3,957
2 x NPT1/2" PN160/CL900
Z57 $4,473 $4,473 $4,473 $4,473 $4,473 $4,473 $4,473
Sea water atmosphere-resistant coating (3 layers), top layer RAL 5005
P90 $551 $723 $723 $946 $946 $1,118 $1,118
Heating jacket for bodyDelivery times: 12 – 14 weeks
1.0619 (WCB) $5,678 $6,194 $6,882 $7,570 $7,914 $9,291 $10,323
1.6220 (LCB/LCC) $5,678 $6,194 $6,882 $7,570 $7,914 $9,291 $10,323
1.4408 (CF8M) $9,635 $9,979 $11,699 $12,387 $13,076 $14,452 $16,172
High alloy materials
Seat and disc Monel 400/K-500 Z61 $1,634 $3,441 $3,957 $9,635 $9,979 $16,172 $16,516
Inconel 625 Z62 $1,548 $3,269 $3,785 $9,291 $9,291 $15,140 $15,484
Hastelloy C276 Z63 $1,720 $3,785 $4,473 $11,011 $11,011 $17,893 $18,581
Hastelloy C4 Z64 $1,893 $4,301 $4,989 $12,387 $12,731 $20,646 $20,990
Spindle Monel 400 Z65 $413 $688 $688 $2,925 $2,925 $3,269 $3,269
Inconel 625 Z66 $379 $619 $619 $2,753 $2,753 $3,097 $3,097
Hastelloy C276 Z67 $447 $757 $757 $3,269 $3,269 $3,613 $3,613
Hastelloy C4 Z68 $516 $860 $860 $3,785 $3,785 $4,129 $4,129
Bellows Monel 400 Z69 $8,946 $10,323 $10,323 $15,484 $15,484 $15,484 $15,484
Inconel 625 Z70 $6,538 $7,914 $7,914 $11,699 $11,699 $11,699 $11,699
Hastelloy C276 Z71 $6,538 $7,914 $7,914 $11,699 $11,699 $11,699 $11,699
Hastelloy C4 Z72 $8,946 $10,323 $10,323 $15,484 $15,484 $15,484 $15,484
1) Change-over valve with welded fl ange
175
Series 310Series 310All prices in $
Typ
e 3
10
Options Type 310
DN 150 200 250 300 400 500
Valve size 6" 8" 10" 12 16" 20"
Needle valve bellows design
1.0619 (WCB)2 x G1/2 PN40 – PN100/CL300 – 600
Z54 $3,269 $3,269 $3,269 $3,269 $3,269 $3,269
2 x G1/2 PN160/CL900
Z55 $3,785 $3,785 $3,785 $3,785 $3,785 $3,785
2 x NPT1/2" PN40 – PN100/CL300 – 600
Z56 $3,269 $3,269 $3,269 $3,269 $3,269 $3,269
2 x NPT1/2" PN160/CL900
Z57 $3,785 $3,785 $3,785 $3,785 $3,785 $3,785
1.6220 (LCB/LCC)2 x G1/2 PN40 – PN100/CL300 – 600
Z54 $3,269 $3,269 $3,269 $3,269 $3,269 $3,269
2 x G1/2 PN160/CL900
Z55 $3,785 $3,785 $3,785 $3,785 $3,785 $3,785
2 x NPT1/2" PN40 – PN100/CL300 – 600
Z56 $3,269 $3,269 $3,269 $3,269 $3,269 $3,269
2 x NPT1/2" PN160/CL900
Z57 $3,785 $3,785 $3,785 $3,785 $3,785 $3,785
1.4408 (CF8M)2 x G1/2 PN40 – PN100/CL300 – 600
Z54 $3,957 $3,957 $3,957 $3,957 $3,957 $3,957
2 x G1/2 PN160/CL900
Z55 $4,473 $4,473 $4,473 $4,473 $4,473 $4,473
2 x NPT1/2" PN40 – PN100/CL300 – 600
Z56 $3,957 $3,957 $3,957 $3,957 $3,957 $3,957
2 x NPT1/2" PN160/CL900
Z57 $4,473 $4,473 $4,473 $4,473 $4,473 $4,473
Sea water atmosphere-resistant coating (3 layers), top layer RAL 5005
P90 $1,462 $1,462 $2,065 $2,065 $2,581 –
Heating jacket for bodyDelivery times: 12 – 14 weeks
1.0619 (WCB) $11,699 $16,172 on request on request on request on request
1.6220 (LCB/LCC) $11,699 $16,172 on request on request on request on request
1.4408 (CF8M) $18,237 $25,807 on request on request on request on request
High alloy materials
Seat and disc Monel 400/K-500 Z61 $21,334 $34,409 $37,850 $39,571 $44,732 –
Inconel 625 Z62 $19,613 $32,689 $36,130 $36,130 $43,012 –
Hastelloy C276 Z63 $23,743 $37,850 $43,012 $43,012 $49,894 –
Hastelloy C4 Z64 $27,528 $43,012 $48,173 $49,894 $58,496 –
Spindle Monel 400 Z65 $6,882 $18,237 $29,248 $29,248 $49,894 –
Inconel 625 Z66 $6,366 $16,861 $27,528 $27,528 $46,453 –
Hastelloy C276 Z67 $7,914 $20,302 $32,689 $32,689 $55,055 –
Hastelloy C4 Z68 $8,946 $23,055 $36,130 $36,130 $63,658 –
Bellows Monel 400 Z69 $20,302 $29,248 $39,571 $39,571 $51,614 –
Inconel 625 Z70 $15,828 $20,990 $20,990 $29,248 $39,571 –
Hastelloy C276 Z71 $15,828 $20,990 $20,990 $29,248 $39,571 –
Hastelloy C4 Z72 $20,302 $29,248 $39,571 $39,571 $51,614 –
176
All prices in $
Series 310Series 310Typ
e 3
10
Options Type 310
DN 25 40 50 65 80 100 1251)
Valve size 1" 1 1/2" 2" 2 1/2" 3" 4" 5"
Pressure ratingof body basic construction2)
1.0619 (WCB)Gland
PN 40, CL150 – 300
Z11 $0 $0 $0 $0 $0 $0 $0
PN 63 Z12 $757 $1,204 $1,290 $1,893 $2,581 $3,269 $3,957
PN 100, CL600 Z13 $1,548 $2,581 $2,753 $3,785 $5,161 $6,538 $7,914
PN 160, CL900 Z14 $2,925 $4,645 $4,989 $6,882 $9,291 $11,699 $14,452
BellowsPN 40, CL150 – 300
Z11 $0 $0 $0 $0 $0 $0 $0
PN 63 Z12 $946 $1,376 $1,548 $2,237 $3,097 $3,785 $4,473
PN 100, CL600 Z13 $2,065 $2,925 $3,269 $4,645 $6,194 $7,570 $8,946
PN 160, CL900 Z14 $3,613 $5,333 $5,850 $8,258 $11,011 $13,420 $16,172
1.6220 (LCB/LCC)Gland
PN 40, CL150 – 300
Z11 $0 $0 $0 $0 $0 $0 $0
PN 63 Z12 $946 $1,462 $1,634 $2,409 $3,097 $3,957 $4,817
PN 100, CL600 Z13 $2,065 $3,097 $3,441 $4,817 $6,366 $8,258 $9,979
PN 160, CL900 Z14 $3,613 $5,678 $6,194 $8,602 $11,355 $14,796 $17,893
BellowsPN 40, CL150 – 300
Z11 $0 $0 $0 $0 $0 $0 $0
PN 63 Z12 $1,204 $1,720 $2,065 $2,753 $3,785 $4,645 $5,505
PN 100, CL600 Z13 $2,409 $3,613 $4,129 $5,678 $7,570 $9,291 $11,355
PN 160, CL900 Z14 $4,473 $6,710 $7,570 $9,979 $13,764 $16,861 $20,302
1.4408 (CF8M)Gland
PN 40, CL150 – 300
Z11 $0 $0 $0 $0 $0 $0 $0
PN 63 Z12 $1,634 $2,753 $2,925 $3,613 $5,333 $6,710 $9,291
PN 100, CL600 Z13 $2,581 $4,129 $4,301 $5,678 $8,258 $10,323 $12,731
PN 160, CL900 Z14 $4,129 $6,710 $7,226 $9,635 $13,420 $16,861 $20,646
BellowsPN 40, CL150 – 300
Z11 $0 $0 $0 $0 $0 $0 $0
PN 63 Z12 $2,065 $3,269 $3,613 $4,473 $6,710 $7,914 $9,635
PN 100, CL600 Z13 $3,269 $4,989 $5,333 $6,882 $9,979 $12,043 $14,452
PN 160, CL900 Z14 $5,161 $7,914 $8,946 $11,355 $16,172 $19,613 $23,398
2 x Reducer (1/2/3 nominal diameter)body basic construction
1.0619 (WCB)PN 40, CL150 – 300
Z21 – $516 $551 $619 $688 $826 $946
PN 63 Z22 – $757 $946 $1,032 $1,118 $1,290 $1,462
PN 100, CL600 Z23 – $1,204 $1,376 $1,548 $1,720 $2,065 $2,409
PN 160, CL900 Z24 – $1,720 $2,065 $2,237 $2,409 $2,925 $2,925
1.6220 (LCB/LCC)PN 40, CL150 – 300
Z21 – $619 $688 $757 $860 $1,032 $1,204
PN 63 Z22 – $1,032 $1,118 $1,204 $1,376 $1,634 $1,893
PN 100, CL600 Z23 – $1,548 $1,720 $1,893 $2,237 $2,581 $2,925
PN 160, CL900 Z24 – $2,237 $2,409 $2,753 $3,097 $3,613 $4,129
1.4408 (CF8M)PN 40, CL150 – 300
Z21 – $757 $946 $1,032 $1,118 $1,290 $1,548
PN 63 Z22 – $1,204 $1,462 $1,634 $1,893 $2,065 $2,409
PN 100, CL600 Z23 – $1,893 $2,237 $2,581 $2,925 $3,097 $3,785
PN 160, CL900 Z24 – $2,753 $3,269 $3,441 $3,957 $4,301 $5,161
1) Change-over valve with welded fl ange.2) Please select option codes for fl ange drillings as stated in the catalog.
177
Series 310Series 310All prices in $
Typ
e 3
10
Options Type 310
DN 150 200 250 300 400 500
Valve size 6" 8" 10" 12 16" 20"
Pressure ratingof body basic construction1)
1.0619 (WCB)Gland
PN 40, CL150 – 300
Z11 $0 $0 $0 $0 $0 –
PN 63 Z12 $4,817 $8,602 $14,108 $19,613 $34,409 –
PN 100, CL600 Z13 $9,979 $17,205 $29,248 $41,291 $86,024 –
PN 160, CL900 Z14 $17,893 $30,969 $53,335 $86,024 $120,433 –
BellowsPN 40, CL150 – 300
Z11 $0 $0 $0 $0 $0
PN 63 Z12 $5,678 $9,635 $14,796 $20,646 $36,130 –
PN 100, CL600 Z13 $11,699 $19,613 $30,969 $43,012 $86,024 –
PN 160, CL900 Z14 $20,646 $36,130 $55,055 $68,819 $137,638 –
1.6220 (LCB/LCC)Gland
PN 40, CL150 – 300
Z11 $0 $0 $0 $0 $0
PN 63 Z12 $6,022 $10,667 $17,549 $25,807 $44,732 –
PN 100, CL600 Z13 $12,387 $21,678 $36,130 $51,614 $86,024 –
PN 160, CL900 Z14 $22,366 $39,571 $65,378 $86,024 $154,843 –
BellowsPN 40, CL150 – 300
Z11 $0 $0 $0 $0 $0
PN 63 Z12 $7,226 $12,043 $18,581 $25,807 $46,453 –
PN 100, CL600 Z13 $14,452 $25,807 $37,850 $53,335 $86,024 –
PN 160, CL900 Z14 $25,807 $44,732 $68,819 $86,024 $172,047 –
1.4408 (CF8M)Gland
PN 40, CL150 – 300
Z11 $0 $0 $0 $0 $0
PN 63 Z12 $10,323 $17,893 $29,248 $39,571 $68,819 –
PN 100, CL600 Z13 $15,828 $27,528 $58,496 $68,819 $137,638 –
PN 160, CL900 Z14 $25,807 $44,732 $103,228 $137,638 $240,866 –
BellowsPN 40, CL150 – 300
Z11 $0 $0 $0 $0 $0
PN 63 Z12 $12,387 $20,646 $30,969 $43,012 $86,024 –
PN 100, CL600 Z13 $18,581 $32,689 $63,658 $86,024 $154,843 –
PN 160, CL900 Z14 $30,969 $51,614 $120,433 $172,047 $292,481 –
2 x Reducer (1/2/3 nominal diameter)body basic construction
1.0619 (WCB)PN 40, CL150 – 300
Z21 $1,204 $1,893 $3,269 $5,333 $11,011 $13,076
PN 63 Z22 $1,893 $2,925 $5,333 $8,602 $17,549 –
PN 100, CL600 Z23 $2,925 $4,473 $8,258 $13,076 $27,528 –
PN 160, CL900 Z24 $4,129 $6,194 $11,699 $18,581 $39,571 –
1.6220 (LCB/LCC)PN 40, CL150 – 300
Z21 $1,462 $2,237 $4,129 $6,538 $13,764 $16,172
PN 63 Z22 $2,409 $3,613 $6,538 $10,667 $22,022 –
PN 100, CL600 Z23 $3,613 $5,505 $10,323 $16,516 $34,409 –
PN 160, CL900 Z24 $4,989 $7,570 $14,452 $23,055 $48,173 –
1.4408 (CF8M)PN 40, CL150 – 300
Z21 $2,065 $3,613 $4,817 $8,258 $16,172 $19,269
PN 63 Z22 $3,269 $5,505 $7,914 $12,387 $27,528 –
PN 100, CL600 Z23 $4,989 $8,946 $12,043 $19,269 $41,291 –
PN 160, CL900 Z24 $5,505 $12,387 $16,861 $27,528 $56,776 –
1) Please select option codes for fl ange drillings as stated in the catalog.
178
179
Page
• Coating systems, Corrosion protection 180
• Marking 182
• LESER Certificate for Global Application 184
• Specific testing 186
• Overview tightness test 188
• Material test certificate 190
• Test and Certificates 191
• Springs 192
• Availability from Charlotte stock 193
• Delivery / Shipping information 195
• Delivery times 196
• US Prepaid Freight Charges 197
• Contact, Ordering and Delivery 198
• VALVESTAR® 199
Se
rvic
e
Contacts& ServicesContacts& Services
180
Se
rvic
e
All prices in €
Level 1 LESER Standard coating systems
DN 15 – 65 80 – 150 ≥ 200
Valve size 1/2" – 2 1/2" 3" – 6" ≥ 8"
Option code
1-layer coating system in RAL 5005 acc. to LID 1608.03
P2A * * *1-layer coating system in RAL 3002 acc. to LID 1608.01
L11 $103 $172 $275
2-layer coating system in RAL 5005 acc. to LID 1608.02
P2C $138 $241 $379
2-layer coating system in RAL 3002 acc. to LID 1608.13
P2D $138 $241 $379
Without coating for carbon steel valves
L06 – – –
Level 2 Coating systems based on ISO 12944 C4
DN 15 – 65 80 – 150 ≥ 200
Valve size 1/2" – 2 1/2" 3" – 6" ≥ 8"
Option code
3-layer coating system in RAL 5005 for tempera-tures up to 120 °C for industrial areas and coastal areas with moderate salinity and chemical plants similar to C4 (ISO 12944) acc. to LID 1608.04
P90 $241 $413 $619
4-layer coating system in RAL 5005 for tempera-tures up to 120 °C for industrial areas and coastal areas with moderate salinity and chemical plants similar to C4 (ISO 12944) acc. to LID 1608.05
P91 $413 $619 $860
2-layer coating stem in RAL 9006 for tempera-tures up to 540 °C for industrial areas and coastal areas with moderate salinity and chemical plants acc. to LID 1608.06
P92 $241 $413 $619
3-layer coating system in RAL 3002 for tempera-tures up to 120 °C for industrial areas and coastal areas with moderate salinity and chemical plants similar to C4 (ISO 12944) acc. to LID 1608.07
P93 $241 $413 $619
Coating systemsCoating systems
181
Se
rvic
e
All prices in €
Level 3 Coating systems acc. to ISO 12944 C5M
DN 15 – 65 80 – 150 ≥ 200
Valve size 1/2" – 2 1/2" 3" – 6" ≥ 8"
Option code
Corrosion protection by protective coating systems similar to C5M (ISO 12944) and Norsok Standard M-501 for carbon steel (120 °C to 540 °C) in aluminum acc. to LID 1608.08
P85 $551 $791 $1,118
Corrosion protection by protective coating system acc. to C5M (ISO 12944) and Norsok Standard M-501 for carbon steel (-50 °C bis 120 °C) in RAL 5005 acc. to LID 1608.09
P86 $551 $791 $1,118
Corrosion protection by protective coating systems high temperature (120 °C to 540 °C) similar to C5M (ISO 12944) and Norsok Standard M-501 for stainless steel in aluminum acc. to LID 1608.10
P87 $551 $791 $1,118
Corrosion protection by protective coating system acc. to C5M (ISO 12944) and Norsok Standard M-501 for stainless steel (-50 °C bis 120 °C) in RAL 5005 acc. to LID 1608.11
P88 $551 $791 $1,118
Corrosion protection by protective coating system for cryogenic tempeture (-196 °C to -50 °C) similar to C5M (ISO 12944) and Norsok Standard M-501 for stainless steel in RAL 5005 acc. to LID 1608.12
P89 $551 $791 $1,118
Delivery times for Level 3 option codes: + 2 weeks
System acc. to customer spec.
DN 15 – 65 80 – 150 ≥ 200
Valve size 1/2" – 2 1/2" 3" – 6" ≥ 8"
Option code
Coating system acc. to customer specifi cation L13 Depending on the version on request
Documentation and Testing
DN 15 – 65 80 – 150 ≥ 200
Valve size 1/2" – 2 1/2" 3" – 6" ≥ 8"
Option code
Dry fi lm thickness test (DFT) acc. to EN ISO 2808 and ISO19840Inspection certifi cate 3.1 acc. to DIN EN 10204
P84 $172
Holiday Test acc. to NACE SP0188 (Porosity)Inspection certifi cate 3.1 acc. to DIN EN 10204
P83 $138
Adhesion Test (Pull Off Test) acc. to EN ISO 4624Inspection certifi cate 3.1 acc. to DIN EN 10204
P82 $103
Adhesion Test (Cross-Cut Test) acc. to EN ISO 2409Inspection certifi cate 3.1 acc. to DIN EN 10204
P81 $103
Corrosion protection by protective coating system certifi cat FROSIO Level II including Level I from LESER inclusive dry fi lm thickness test, adhesion test and holiday test; Inspection certifi cate 3.1 acc. to DIN EN 10204
P80 $206
Corrosion protection by protective coating system cer-tifi cat FROSIO Level III from 3rd Party inclusive dry fi lm thickness test (DFT), adhesion test and holiday testInspection certifi cate 3.2 acc. to DIN EN 10204
P79 Depending on the order quantity
Coating systemsCoating systems
182
MarkingMarkingMarkings on Safety Relief Valves
This side shows the possibilities for the marking of LESER relief valves.The standard marking consists of:– Safety valve tag– Name plate for global application – NGA
LESER also offers the following additional markings:– Additional information on the safety valve tag– Marking on name plate deviating from standard– Marking with stainless steel tag– Marking with numeral punch– Marking with tag provided by customerFor details about different marking options please see table below.
Item No. DesignationQuantity
of lines
Quantity
of letters
Type height
[mm]Option
code
Additional
price
Safety valve tag
1 1. TAG-no. per safety valve 1 18 3 –
2 2. Component of plant or pipework 1 15 3M25 –
3 3. Additional information 3 45 3
Fixing – Design with lever H3/H4: by wire tie in bore of the lever *– Design with cap H2: by wire tie in one bore at the outlet fl ange *
Name plate NGA
25 + 26 Customer specifi c information 2 30 2 M16 –
26 Customer specifi c information 1 30 2 M17 –
Stainless steel tag
4 1. TAG-no. per safety valve 1 15 3M29 $28
5 2. Additional information 3 45 3
Numeral punches
9 Numeral punches, inlet body 1 4 3 M27 $41
10 Numeral punches, top of oulet fl ange 1 15 6 M26 $41
11 Numeral punches, outlet fl ange sidewards 1 15 6 M39 $41
12 Numeral punches, bottom of outlet fl ange 1 15 6 M42 $41
13 Numeral punches, inlet fl ange sidewards 1 15 6 M31 $41
14Numeral punches,10 mm-type height for item 10 –13
1 15 10 M32 $41
Tag provided by customer
22 Tag provided by customer J75 –
– Supply latest two weeks before date of shipment to:
LESER GmbH & Co. KG, Abt. PP – SonderbearbeitungItzehoer Str. 63 – 65, 24594 Hohenwestedt, GermanyFon + 49 (4871) 27-0
Fixing of stainless steel tag and customer tag
With sealing wire in the region of bonnet/cap – lifting device *6 Spot welded on outlet fl ange N69 $120
7 Spot welded at backsite of body M24 $120
8 Fixing with grooved pins, top of outlet fl ange N11 $120
18 Fixing with grooved pins instead of spot welding M30 $120
Identifi cation marking
Possible markings
Safety valve tag
Dimensions W x H [mm]: 85 x 126
2
3
1
Name plate – NGAName plate for Global Application Dimensions W x H [mm]: 60 x 40
Seat
Temp.
°Fcc2408
°C
SCFM
GPM
Tag
d0 mm
CDTP
ISO4126
mm2
Size
Set p.
Lift
Back p.
mm
Type
psibar
Flow area
TÜV-SV
%
%
GasLiquid
Date
Serial no.
Steam
ASME-Cap.
lbs/hr%
Stainless steel tag
Dimensions W x H [mm]: 58 x 15
26
25
1
3-lines, max. 45 letters
1 line, max. 15 letters
Se
rvic
e
All prices in $
183
Se
rvic
e
Customer name plate
MarkingMarkingPlacement of marking
High Performance Safety relief valve
7
14
8 10
1411
1412
6
22
3-lines, max. 45 letters13
14
Compact Performance Safety relief valve
9
22
1 2 3 4 5
1 2 3 4 5
1 line, max. 15 letters
Customer name plate
1 line, max. 15 letters
251 26
251 26
Seat
Temp.
°Fcc2408
°C
SCFM
GPM
Tag
d0 mm
CDTP
ISO4126
mm2
Size
Set p.
Lift
Back p.
mm
Type
psibar
Flow area
TÜV-SV
%
%
GasLiquid
Date
Serial no.
Steam
ASME-Cap.
lbs/hr%
Seat
Temp.
°Fcc2408
°C
SCFM
GPM
Tag
d0 mm
CDTP
ISO4126
mm2
Size
Set p.
Lift
Back p.
mm
Type
psibar
Flow area
TÜV-SV
%
%
GasLiquid
Date
Serial no.
Steam
ASME-Cap.
lbs/hr%
184
LESER Certificate for Global ApplicationLESER Certificate for Global Application
LESER CGA Certifi cate for Global Application Option code Price per safety valve
LESER CGA Certifi cate for Global ApplicationInspection certifi cate 3.1 according to DIN EN 10204
H03 $0
Tests and Procedures
All tests carried out at LESER are specifi ed in “Procedures”.
Procedures provide you with all detailed information about:• Applicability • Acceptance criteria• Scope and defi nition • Personal qualifi cation• Test reference • Documentation• Test equipment • Standard references• Test procedure
Se
rvic
e
LESER CGA Certifi cate for Global Application
To be able to operate pressurised systems, they must usually be equipped with safety valves. These safety valves must meet regulation standards, which however vary depending on the application region. For example:
• Europe: Fulfi lment of the Pressure Equipment Directive (PED) in connection with the fulfi lment of harmoni-sed standards such as ISO 4126 and type-exami-nation by a notifi ed body
• North America: Fulfi lment of the ASME code and approval from the National Board
• China: Fulfi lment of the European or American testing cri-terion and AQSIQ approval
LESER delivers safety valves which meet all requirements of the worldwide relevant regulations and provides the necessary docu-mentation in form of the CGA.
The LESER CGA includes all necessary information, and documents all required processing steps and tests, so that no further certifi cates are necessary for the start of operation of the safety valve. If some cases, additional country-specifi c delivery papers are required,
for example, a GOST passport. In other words: LESER as an OEM supplier often does not know where the delivered safety valve is put into operation. However, with LESER CGA, it is possible to put LESER safety valves into operation throughout the world.
Furthermore to the CGA, LESER can issue for each test an inspec-tion certifi cate 3.1 according to DIN EN 10204 on request. Please order the inspection certifi cates with the option codes on page 185. The shipment of certifi cates (LESER CGA or single inspection certifi cates) will be carried out together with the safety valves, if not specifi ed otherwise. By request LESER dispatches the certifi cates also by e-mail, fax or mail. All certifi cates already ordered by the customer can be downloaded from the “LESER Download Portal” www.leser.com
For additional orders of inspection certifi cates please contact LESER Service “Certifi cates”: certifi [email protected] orders of inspection certifi cates will be charged later. The issue of a LESER CGA has no effect on the delivery time of the safety valve! The LESER CGA can be ordered by the customer with option code H03.
185
LESER Certificate for Global ApplicationLESER Certificate for Global Application
Test pressure Directive LESER Standard Option code Price
Inspection certifi cate 3.1 acc. to DIN EN 10204: Testing of cold differential test pressure with air
DIN EN ISO 4126-4 DIN EN ISO 4126-1, chapter 7.2
ASME Code Section I, PG-72ASME Code Section VIII Div. 1,
UG 134; AD 2000-Merkblatt A2, chapter 11
LGS 0202 N05 $62
Component strength test
Inspection certifi cate 3.1 acc. to DIN EN 10204: Hydrostatic testing 1,5 x PN
DIN EN ISO 4126-1;ASME Code Sec. VIII Div. 1,
UG 136(d)(2)LGS 0209 M68 $62
Surface crack test
Surface crack testing in accordance with AD 2000-Merkblatt A4, chapter 6 and ASME code section VIII, Div. 1, UG 136 is usually conducted as random testing and can be certifi ed with LESER CGA.
Surface crack testing can be conducted using varying methods (magnetic particle testing, red-white color dye penetrant testing, or fl uorescent penetrant testing). LESER determines the corresponding test method for the component and substance.
Inspection certifi cate 3.1 acc. to DIN EN 10204: Surface crack test
AD 2000-Merkblatt A4, chapter 6ASME Code, Section VIII Div 1,
UG 136
LGS 0203LGS 0204
See page 186N52, N53, N54
Tightness
Overview of different tightness tests see page 188
Seat tightness test
Inspection certifi cate 3.1 acc. to DIN EN 10204: Seat tightness test with air, bubble test– Standard tightness requirements
DIN EN ISO 4126-1; DIN EN 12266-1,ASME Code Section VIII Div. 1,
UG 136(d)(5); API 527LGS 0201 M66 $62
Inspection certifi cate 3.1 acc. to DIN EN 10204: Seat tightness test with air, test fl uid
DIN EN ISO 4126-1; DIN EN 12266-1,ASME Code Section VIII Div. 1,
UG 136(d)(5); API 527LGS 0201 M22 $62
Pressure retaining body
Inspection certifi cate 3.1 acc. to DIN EN 10204:Shell tightness test
DIN EN 12266-1, 4.2 LGS 0201 M18 $62
Back seat tightness test (tightness outwards)
Flanged Safety valves
Inspection certifi cate 3.1 acc. to DIN EN 10204:Back seat tightness test with test fl uid DIN EN 12266-2, test P21
ASME Code Section VIII, Part UG-136(d)
LGS 0201 M28 $62
Compact Performance Safety valves
Inspection certifi cate 3.1 acc. to DIN EN 10204:Back seat tightness test, dipping procedure
LGS 0201 M78 $62
Design review of safety valve
Design review in respect of stresses and technical safety.Inspection certifi cate 3.1 acc. to DIN EN 10204:Design review
AD 2000-Merkblatt A4, chapter 6, par. 6.1TRD 110, chapter 4.2
WI 3300.00 M85 $62
Material identifi cation check (PMI)
Material identifi cation check in accordance with AD 2000-Merkblatt A4, chapter 6, par. 6.1 (6) is usually conducted as random testing and can be certifi ed with LESER CGA. LESER determines the corresponding test method for the component and material.
Inspection certifi cate 3.1 acc. to DIN EN 10204: Material identifi cation check (PMI)
AD 2000-Merkblatt A4, chapter 6, par. 6.1 (6)
LGS 0207See page 187N55, N56, N57
Body volume check
Inspection certifi cate 3.1 acc. to DIN EN 10204:Ultrasonic test
AD 2000-Merkblatt A4, chapter 6ASME Code, Section VIII Div. 1, UG-136
LGS 0205 M56 $62
For additional tests on customer request (not certifi ed by LESER CGA) please refer to page 186 and 187.
Tests at LESER certifi ed by CGA Certifi cate for Global Application
All tests, which are certifi ed with the LESER CGA Certifi cate for Global Application are listed below.On customer request LESER can issue an additional inspection certifi cate 3.1 according to DIN EN 10204 for each test.Please order the additional inspection certifi cates with the option codes stated in the column “Option code”.
The issue of a LESER CGA has no effect on the delivery time of the safety valve!
Note: All prices quoted on this page are net prices in $
All prices are per safety valve
Se
rvic
e
186
Specific TestingSpecific Testing
Note: All prices quoted on this page are net prices in $
All prices are per safety valve
Tests and inspection certificates
Specifi c testing
Specifi c testing is always verifi ed by an inspection certifi cate 3.1 in accordance with DIN EN 10204. This, however, does not mean that the LESER CGA is given. To order testing including the inspection certifi cate, please enter the appropriate option code.
DN / NPS ≤ 50 65 – 150 ≥ 200
Body strength test Directive LESER Standard Option code Price
Hydrostatic testing acc. to customer specifi cationInspection certifi cate 3.1 acc. to DIN EN 10204 included
Customer specifi cation(Please note: Test pressure
and test duration must be specifi ed.)LGS 0209 M01 $172 $241 $516
Tightness
Overview of different tightness test see page 188
Seat tightness test with air, bubble test– Increased tightness requirementsInspection certifi cate 3.1 acc. to DIN EN 10204 included
DIN EN ISO 4126-1; DIN EN 12266-1,ASME Code Section VIII Div. 1,
UG 136(d)(5); API 527LGS 0201 J86 $172 $206 $379
Tightness: Helium leakage test
Back seat tightness test with heliumInspection certifi cate 3.1 acc. to DIN EN 10204 included
DIN EN 12266-2, Test P21ASME Code Section VIII,
Part UG-136(d)LGS 0201 N64 $120 $206 $310
Seat tightness test with helium, overpressureprocedure – Inspection certifi cate 3.1 acc. to DIN EN 10204 included
DIN EN ISO 4126-1DIN EN 12266-1, Test P12ASME Code Section VIII,
Part UG-136(d)API 527
LGS 0201 N62 $120 $206 $310
Seat tightness test with helium, leakagedetection in vacuum – Inspection certifi cate 3.1 acc. to DIN EN 10204 included
LGS 0201 M86 $120 $206 $310
Testing of substances
Testing that all parts are free of oil and greaseInspection certifi cate 3.1 acc. to DIN EN 10204 incl.
LGS 0210
Se
rvic
e
See price section of corresponding valve type
Surface crack test
Surface crack testing to components can be conducted according to customer specifi cations. Components such as discs, seat/nozzle and bodies/inlet bodies are to be specifi ed by the customer. LESER determines the corresponding test method for the component and material.The tests conducted on the individual components are verifi ed with an inspection certifi cate 3.1 according to DIN EN 10204.
DN / NPS 15 – 50 65 – 125 ≥150
Inspection certifi cate 3.1 acc. to DIN EN 10204: Surface crack test
AD 2000-Merkblatt A4, chapter 6ASME Code, Section VIII Div 1,
UG 136
LGS 0203LGS 0204
– Disc N52 $138
– Seat / nozzle N53 $138
– Body / inlet body N54 $172 $206 $482
Visual examination and dimension test
Visual examinationtest report 2.2 acc. to DIN EN 10204 included
AD 2000-Merkblatt A4, chapter 6ASME Code Section V, Article 9:
Visual ExaminationLGS 0218 N1R $34
Dimension testtest report 2.2 acc. to DIN EN 10204 included
AD 2000-Merkblatt A4, chapter 6PED 97/23EC, Pressure Equipment
DirectiveLGS 0216 N1S $34
187
Specific TestingSpecific TestingTests and inspection certificates Note: All prices quoted on this page
are net prices in $
All prices are per safety valve
Se
rvic
e
Surface roughness Directive LESER Standard Option code Price
Clean Service Safety valves
The surface qualities for LESER Clean Service Safety valves are defi ned as LESER Surface Grades (LSG), and assigned to the individual valves by the Clean fi nish, HyClean fi nish, and Sterile fi nish surface packages.
LESER Surface packages– Clean fi nish– HyClean fi nish– Sterile fi nish
B50 – B79See price section of corresponding
valve type
Inspection certifi cate 3.1 acc. to DIN EN 10204: Surface roughness
DIN EN ISO 11866 ASME BPE 2002 Part SD
LGS 0214 N041) $344
Surface roughness for components according to customer specifi cation
Testing of surface roughnessInspection certifi cate 3.1 acc. to DIN EN 10204 included – Components to be specifi ed
Customer specifi cation LGS 0214 N041) $344
Testing of components
Specifi cation acc. to NACEInspection certifi cate 3.1 acc. to DIN EN 10204 included2)
Components: Body, seat / nozzle and disc
NACE Standard- MR0175-2003- MR0103-2012
LDeS 3001.91 N78N77
$120
Material identifi cation check PMI
Customer-specifi c
Material identifi cation checking to components can be conducted according to customer specifi cations. The components such as discs, seat / nozzle and bodies/inlet bodies are to be specifi ed by the customer. The tests conducted on the individual components are verifi ed with an inspection certifi cate 3.1 according to DIN EN 10204.
Material identifi cation check (PMI)Inspection certifi cate 3.1 acc. to DIN EN 10204 included
AD 2000-Merkblatt A4, chapter 6, par. 6.1 (6)
Röntgenverordnung (RöV): §15a ASME Section II Part A, SA751, Specifi cation for Test Methods,
Practices, and Terminology for Chemical Analysis of Steel
ProductsAPI 578, Material Verifi cation
Program for New and existing alloy Piping Systems
LGS 0207
– Disc N55
$155
– Seat / nozzle N56
– Body / Inlet body N57
– Spindle N1A
– Guide N1B
– Bonnet N1C
– Spring N1D
– Bellows N1E
– Cap / lifting device N1F
– Top plate (POSV) N1G
– Piston guide (POSV) N1H
– Spring (POSV Pos.59) N1J
Body volume check Directive LESER Standard Option code Price
Radiographic test acc. to LESER fi lm position plan incl. inspection certifi cate 3.1 DIN EN 10204
AD 2000-Merkblatt A4, chapter 6ASME Code, Section VIII Div 1,
UG 136LGS 0206 S01 $1,118
1)for electropolished valves N04 option is included as a standard 2)Other options required to supply NACE can be found on page 74
188
Tightness testTightness test
No. Designation Test mediaOption code
(Inspection certifi cate)
Procedure
LWN
1 Seat tightness test with air
LGS 02011a – Bubble test – standard tightness requirements Air M66
1a – Bubble test – increased tightness requirements Air J86
1b – Test fl uid Air M22
2 Shell tightness test Air M18 LGS 0201
3 Back seat tightness test (Tightness outwards)
LGS 02013a – Test fl uid Air M28
3b – Dipping method Air M78
3c – Vacuum method Helium N64
4 Seat tightness test with helium
LGS 02014a – Overpressure procedure (sniffi ng method) Helium N62
4b – Leak detection method in vacuum Helium M86
Tightness test
Graphical presentation
Air, leak detector acc. to DIN 14291Option code M22
Air, bubble testOption code M66
Air,leak detector acc. to DIN 14291Option code M18
Air,leak detectorOption code M28
1a 1b 2 3a
Se
rvic
e
This page gives an overview for all tightness tests carried out at LESER and option codes for ordering the inspection certifi cate 3.1 according to DIN EN 10204.
For further informationen and prices please refer to page 184 – 186.
189
Air,dipping methodOption code M78
HeliumOverpressure procedureOption code N62
Helium,Vacuum methodOption code N64
3b 3c 4a 4b
1a
2
4b
1b
4a
3c3b3a
Helium, Leakage detection in vacuumOption code M86
Tightness testTightness test
Se
rvic
e
190
Note: All prices quoted on this page are net prices in $
Shipment of certifi cates with the valve, if not stated otherwise
All prices are per safety valve!
Material test certificateMaterial test certificateS
erv
ice
Material test certifi cates
DN / NPS 15 – 125 150 ≥ 200
Compact Performance Option code Prices
Inlet body DIN EN 10204-3.1 H01 $0 – –
Outlet body DIN EN 10204-3.1 L34 $34 – –
Inlet fl ange DIN EN 10204-3.1 L22 $34 – –
Outlet fl ange DIN EN 10204-3.1 N3B $34 – –
Outlet adapter DIN EN 10204-3.1 N3A $34 – –
Flange safety valves
Body DIN EN 10204-3.1 H01 $0 $0 $0
Type 5267 body DIN EN 10204-3.2 H09 Prices see page 71
Type 4587 body DIN EN 10204-3.2 H09 Prices see page 141
Type 447 Outlet body DIN EN 10204-3.1 L34 $86 – –
Change-over valves
Body / fl ange elbow DIN EN 10204-3.1 Y41
Prices see pages 170 – 171Studs DIN EN 10204-3.1 N07
Nuts DIN EN 10204-3.1 N08
Other components
Adjusting ring DIN EN 10204-2.2 H2D
all DN / NPS $34
Spring plate DIN EN 10204-2.2 H2F
Adjusting screw DIN EN 10204-2.2 H2G
Gasket DIN EN 10204-2.2 H2H
Lock screw DIN EN 10204-2.2 H2J
Bonnet DIN EN 10204-3.1 L30
all DN / NPS $34
Cap / lifting device DIN EN 10204-3.1 L31
Seat / nozzle DIN EN 10204-3.1 L59
Disc DIN EN 10204-3.1 L23
Bonnet spacer DIN EN 10204-3.1 H2E
Bellows metal DIN EN 10204-3.1 N96
Elastomer bellows DIN EN 10204-3.1 N96
Studs DIN EN 10204-3.1 N07
Nuts DIN EN 10204-3.1 N08
Spring DIN EN 10204-3.1 L60
Spindle DIN EN 10204-3.1 N94
Guide DIN EN 10204-3.1 N95 all DN / NPS $344
Maximum amount for material certifi cation of other components: $155
Pilot operated safety valve
Material test certifi cates see page 123
191
Note: All prices quoted on this page are net prices in $
Test and CertificatesTest and Certificates
Se
rvic
e
Prices for legalization by consulate / embassyFor the legalization by consulate / embassy a certifi cation by chamber of commerce is necessary at fi rst.
Please note: Due to the legalization by consulate / embassy the delivery time must be extended by 2 – 3 weeks.
For the determination of extended legalization costs please state the number and the document character (Commercial Invoice, Certifi cate of Origin, etc.).
Prices for customer specifi c inspections as well by third party please specify detailed scale of inspection.
Customer specifi c inspection
Inspection by third party
Option code Delivery time of certifi cates Price1)
Standard inspections for set pressure
Det Norske Veritas (DNV) M45
LESER provides the certifi cates directly after recieving them
from the inspection organisation.
$241
Germanischer Lloyd (GL) M47 $241
Lloyd‘s Register EMEA (LREMEA) M48 $344
American Bureau of Shipping (ABS) M38 $447
Bureau Veritas (BV) M43 $379
Registro Italiano Navale (RINA) M50 $344
ClassNK NIPPON Kaiji Kyokai (Japan) on request
Others LESER will charge the third party cost plus $172 per safety valve.
1) Price only valid for standard inspections for set pressure.Dependig on the certifying body additional options must be complied with. See LDeS 3001.89
Export documents
192
SpringsSpringsAll prices in $Price overview of springs
Remark:Springs not in stock are special springs. For those there are varied prices according to special springs-price list!For double springs you also have to double the price!In case of Inconel springs as an option the price for the spring has to be charged additionally to the price of the safety valve.
Select in the upper part of the table due to product groups, Type and nominal diameter, the safety valve you require a spring for. In the lower part of the table you can see the particular material code and price for your required spring.
You will fi nd the order number for your spring according to the spring data tables in LGS 3600.
Characteristic Type Nominal diameter / d0 / Orifi ce
High Performance
441/442 – DN 20 DN 25 DN 32 DN 40 DN 50 DN 65 DN 80 DN 100 –125 DN 150 ≥ DN 200
441/442 ANSI – – 1" x 2" 11/2" x 2" 11/2" x 21/2" 2" x 3" 3" x 4" – 4" x 6" – –
455/456457/458
– – – – DN 25 – DN 50 – DN 80DN 100 –
150–
Modulate Action427/429431/433
– DN 15 – 40 DN 50 DN 65 DN 80 DN 100 DN 125 – DN 150 – –
Critical Service447 – – – DN 25 – DN 50 – DN 80 DN 100 – –
546 – – DN 25 – DN 40 DN 50 – 65 DN 80 DN 100 – – –
S & R532, 534 – DN 15 – 25 DN 32 DN 40 DN 50 – 65 DN 80 DN 100 DN 125 DN 150 – –
543/544 – – – DN 50 DN 65 DN 80 DN 100 – – – –
Compact
Performance
459/462 – all d0 – – – – – – – – –
437/438 all d0 – – – – – – – – – –
Clean Service
481 d0 10 – – – – – – – – – –
488 – – DN 25 – – DN 40 – 65 DN 80 – 100 – – – –
483/484/485 DN 25 DN 40 – – – – – – – – –
API
526 CL150 – – – D, E – F – H J K, L M – P Q, R T
526 CL300L – – – D, E – F – H J K, L M – P Q, R T
526 CL300 – – – D, E – F, G H J, K L – P Q R, T
526 CL600 – – – D, E – F, G H J, K L – P Q R
526 CL900 – – – – – D – G H J K – N P, Q –
526 CL1500 – – – – – D – F G, H J K, L – –
526 CL2500 – – – – – D – F G, H – – – –
Material code Materials
Bonnet size and spring dimensions
437459
V20V25 V32 V40 V50 V65 V80
V100
V125
HD100
V150≥ V200
15 x 55 28 x 78 28 x 91 34 x 103 40 x 135 50 x 203 64 x 250 80 x 290 110 x 325 140 x 315 200 x 570
1. (standard) 1.1200 $86 $86 $86 $120 $120 $155 – – – – –
2. (heat resistant) 1.8159/1.7102 $86 $86 $86 $172 $172 $206 $344 $516 $688 $860 $1,376
4. (corrosion resistant) 1.4310 $86 $86 $86 $241 $241 $310 $482 $688 $1,376 $2,237 on request
7. (corrosion resistant) Inconel X750 $310 $310 $310 $860 $860 $1,118 $1,720 $2,409 $4,817 $7,914 on request
Se
rvic
e
193
Se
rvic
e
Items listed in red throughout the US Order and Pricing Information are available in 1 week (or less) from Charlotte stock. Below is a compressed overview of the red safety valves. The overview shows the material, size, and connection combi-nations carried in stock for each valve Type. The column in the
far right, “Small order” shows the number of pieces that can be expected to be available per customer order. For orders with quantities over 10 pieces, standard lead times
may not apply. Please consult LESER US to verify the lead
time of these large quantity orders.
ServiceServiceAvailability from Charlotte stock
Type Orifi ce MaterialConnection
Small
order
Size Type PC
Compact Performance
437
standard
version
0.521 D 430 F 1/2" x 1/2" MNPT x FNPT 20
1/2" x 1" MNPT x FNPT 40
3/4" x 1" MNPT x FNPT 40
1" x 1" MNPT x FNPT 20
1/2" x 1"CL150 – CL600 x
CL15010
3/4" x 1"CL150 – CL600 x
CL15010
316L 1/2" x 1/2" MNPT x FNPT 163/4" x 1" MNPT x FNPT 20
1/2" x 1/2" FNPT x FNPT 20
1/2" x 1"CL150 – CL600 x
CL15010
3/4" x 1"CL150 – CL600 x
CL15010
437
long
version
0.521 D 316L1/2" x 1/2" FNPT x FNPT 20
438 / 439 0.462 D 430 F 1/2" x 1/2" MNPT x FNPT 103/4" x 1" MNPT x FNPT 16
1/2" x 1"CL150 – CL600 x
CL150 6
3/4" x 1"CL150 – CL600 x
CL1506
316L 1/2" x 1/2" MNPT x FNPT 103/4" x 1" MNPT x FNPT 10
1/2" x 1"CL150 – CL600 x
CL1506
3/4" x 1"CL150 – CL600 x
CL1506
459 / 462 0.749 D WCB 1/2" x 1" MNPT x FNPT 103/4" x 1" MNPT x FNPT 10
1" x 1" MNPT x FNPT 10
459 / 462 0.749 D CF8M 1/2" x 1" MNPT x FNPT 103/4" x 1" MNPT x FNPT 10
1" x 1" MNPT x FNPT 10
459 / 462 D WCB 1/2" x 1" MNPT x FNPT 203/4" x 1" MNPT x FNPT 40
1" x 1" MNPT x FNPT 20
3/4" x 1"CL150 – CL1500 x
CL150 – CL30020
1" x 1"CL150 – CL1500 x
CL150 – CL30020
459 / 462 F WCB 1" x 11/2" MNPT x FNPT 10
Valve information
Type Orifi ce MaterialConnection
Small
order
Size Type PC
High Performance
441 F WCB 1" CL150 – CL300 10
G 11/2" CL150 – CL300 6
H 11/2" CL150 – CL300 4
K 2" CL150 – CL300 4
L 3" CL150 – CL300 4
P 4" CL150 – CL300 4
F CF8M 1" CL150 6
H 11/2" CL150 4
K 2" CL150 4
F WCB DN 25 PN 40 6
G DN 50 PN 40 4
Clean Service
481 0.462 D 316L 1" x 1/2" CO x FNPT 15
1" x 1" CO x FNPT 10
1" x 1" CO x CO 4
483 D 316L 1" x 11/2" CO x CO 30
E 11/2" x 2" CO x CO 25
488 F 316L 11/2" x 2" CO x CO 15
1" x 11/2" CL150 x CL150 4
H 2" x 3" CO x CO 15
11/2" x 21/2" CL150 x CL150 2
K 21/2" x 31/2" CO x CO 6
2" x 3" CL150 x CL150 2
Critical Service
447 F WCB /
PTFE1" CL150 15
J 2" CL150 4
L 3" CL150 2
High Effi ciency
811 / 821 D – T WCB 1" – 8" CL150 x CL150CL300 x CL150CL600 x CL150
6
CF8M 1" – 8" CL150 x CL150 4
194
API Availability WCB 1.0619
Flange class 150 x 150 300L x 150 300 x 150 600 x 150 900 x 300 1500 x 300 2500 x 300
Valve size 1 D 2 1 D 2 1 D 2 1 D 2 11/2 D 2 11/2 D 2 11/2 D 3Art. No. 5262. 001* 002* 003* 004* 005*
E1 E 2 1 E 2 1 E 2 1 E 2 11/2 E 2 11/2 E 2 11/2 E 3
Art. No. 5262. 015* 016* 017* 018* 019*
F11/2 F 2 11/2 F 2 11/2 F 2 11/2 F 2 11/2 F 3 11/2 F 3 11/2 F 3
Art. No. 5262. 029* 030* 031* 032* 033* 034*
G11/2 G 3 11/2 G 3 11/2 G 3 11/2 G 3 11/2 G 3 2 G 3 2 G 3
Art. No. 5262. 045* 046* 047* 048* 049* 050* 051*
Flange class 150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 300
Valve size 11/2 H 3 11/2 H 3 2 H 3 2 H 3 2 H 3 2 H 3Art. No. 5262. 142* 143* 144* 145* 146* 147*
J2 J 3 2 J 3 3 J 4 3 J 4 3 J 4 3 J 4
Art. No. 5262. 162* 163* 164* 165* 166* 167*
K3 K 4 3 K 4 3 K 4 3 K 4 3 K 6 3 K 6
Art. No. 5262. 202* 203* 204* 205* 206*
Flange class 150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150
Valve size 3 L 4 3 L 4 4 L 6 4 L 6 4 L 6 4 L 6Art. No. 5262. 232* 233* 234* 235* 236* 237*
M4 M 6 4 M 6 4 M 6 4 M 6 4 M 6
Art. No. 5262. 580* 581* 582* 583*
N4 N 6 4 N 6 4 N 6 4 N 6 4 N 6
Art. No. 5262. 590* 591* 592* 593*
P4 P 6 4 P 6 4 P 6 4 P 6 4 P 6
Art. No. 5262. 645* 646* 647* 648* 649*
Q6 Q 8 6 Q 8 6 Q 8 6 Q 8
Art. No. 5262. 657* 658* 659*
R6 R 8 6 R 8 6 R 10 6 R 8
Art. No. 5262. 665* 666* 667* 668*
T8 T 10 8 T 10 8 T 10 8 T 10
Art. No. 5262. 675* 676* –
API Availability CF8M 1.4408
Flange class 150 x 150 300L x 150 300 x 150 600 x 150 900 x 300 1500 x 300 2500 x 300
Valve size 1 D 2 1 D 2 1 D 2 1 D 2 11/2 D 2 11/2 D 2 11/2 D 3Art. No. 5264. 010* 011* 012* 013* 014*
E1 E 2 1 E 2 1 E 2 1 E 2 11/2 E 2 11/2 E 2 11/2 E 3
Art. No. 5264. 024* 025* 026* 027* 028*
F11/2 F 2 11/2 F 2 11/2 F 2 11/2 F 2 11/2 F 3 11/2 F 3 11/2 F 3
Art. No. 5264. 039* 040* 041* 042* 043* 044*
G11/2 G 3 11/2 G 3 11/2 G 3 11/2 G 3 11/2 G 3 2 G 3 2 G 3
Art. No. 5264. 110* 111* 112* 113* 114* 115* 116*
Flange class 150 x 150 300L x 150 300 x 150 600 x 150 900 x 300 1500 x 300
Valve size 11/2 H 3 11/2 H 3 2 H 3 2 H 3 2 H 3 2 H 3Art. No. 5264. 152* 153* 154* 155* 156* 157*
J2 J 3 2 J 3 3 J 4 3 J 4 3 J 4 3 J 4
Art. No. 5264. 196* 197* 198* 199* 200* 201*
K3 K 4 3 K 4 3 K 4 3 K 4 3 K 6 3 K 6
Art. No. 5264. 111* 112* 113* 114* 115*
Flange class 150 x 150 300L x 150 300 x 150 600 x 150 900 x 150 1500 x 150
Valve size 3 L 4 3 L 4 4 L 6 4 L 6 4 L 6 4 L 6Art. No. 5264. 242* 243* 244* 245* 246* –
M4 M 6 4 M 6 4 M 6 4 M 6 4 M 6
Art. No. 5264. 587* 588* 589* –
N4 N 6 4 N 6 4 N 6 4 N 6 4 N 6
Art. No. 5264. 597* 598* 599* –
P4 P 6 4 P 6 4 P 6 4 P 6 4 P 6
Art. No. 5264. 653* 654* 655* 656* –
Q6 Q 8 6 Q 8 6 Q 8 6 Q 8
Art. No. 5264. 662* 663* 664*
R6 R 8 6 R 8 6 R 10 6 R 8
Art. No. 5264. 671* 672* 673* 674*
T8 T 10 8 T 10 8 T 10 8 T 10
Art. No. 5264. 678* 679* –
ServiceServiceDelivery times
Small order PC
10 1 week6 1 week4 1 week2 1 week
5.5 up to 11 weeks
Small order PC
6 1 week4 1 week2 1 week
5.5 up to 11 weeks
D
D
H
H
L
L
Se
rvic
e
195
Se
rvic
e
ServiceServiceDelivery / Shipping Information
Calculating the shipping weight
Weights of individual LESER safety valves can be found throughout the “US Order and Pricing Information”. Below is an example from the Type 441 pricing on page 130:
The weight of a shipment without packing material is defi ned as the net weight. The gross weight of a shipment includes the packing material. The gross weight can be estimated by multiplying the net weight by a factor. Also, if bellows construction is selected an additional factor must be taken into consideration
Example: Type 4412.4842 with bellows
Net weightx
Packing factorx
Bellows factor=
Gross weight
49 lb 1.2 1.05 57 lb
Delivery times (page 196)
Page 196 outlines how to determine the delivery time for each LESER valve Type. There are two delivery points LESER can supply from:
1. FCA Charlotte North Carolina (CLT) – Delivery path A: standard delivery by ground service – Delivery path C: sea freight from factory routed through Charlotte
2. FCA German factory, Hohenwestedt Germany (HOW) – Delivery path B: air freight – Delivery path D: sea freight
Please note: acc. to Incoterms 2010, FCA stands for Free Carrier and assigns responsibility for freight charges to the buyer from the FCA point.
Production/assembly times are listed for each valve Type. The delivery time can be estimated by adding the transit time for the delivery path (A to D) to the production/assembly time. Additional times required for special options (ex. heating jacket) only available from the German factory must be added to determine the total delivery time.
Example: Type 526 with heating jacket supplied from factory by air freight (path B)
Production time+
Special option time+
Transit time=
Total time
4 weeks 6 weeks 6 weeks 16 weeks
Type 441, 442 ANSI
Valve size 1" x 2" 11/2" x 2" 11/2" x 21/2" 2" x 3"Actual Orifi ce diameter d0 [mm] 23 29 37 46
Actual Orifi ce area A0 [inch2] 0.644 1.024 1.667 2.576API Orifi ce designation F G H K
API eff. Orifi ce area [inch2] 0.307 0.503 0.785 1.838Weight [lb] 22 29 35 49
Body material: WCB
Bonnet
closedH2 Art. No. 4412. 4812 4822 4832 4842
$1,203 $1,356 $1,632 $2,198
196
Delivery MatrixDelivery MatrixDelivery times
Path Origin Delivery term Transit time
A Charlotte NC (CLT) FCA Charlotte NC 3 days
B Hohenwestedt (HOW), Germany FCA German Factory 10 days
C Hohenwestedt (HOW), Germany FCA Charlotte NC 7 weeks
D Hohenwestedt (HOW), Germany FCA German Factory 6 weeks
Product group Type
Origin Charlotte (CLT) Origin German Factory (HOW)
AssemblyTotal
delivery timeProduction Total delivery time
A B C D
Compact
Performance
437/438/439 4 days 1 week 2 weeks 3.5 weeks 9 weeks 8 weeks
459/462 4 days 1 week 2 weeks 3.5 weeks 9 weeks 8 weeks
API 526 4 days 1 week 4 weeks 5.5 weeks 11 weeks 10 weeks
High Effi ciency 811, 821 4 days 1 week 4 weeks 5.5 weeks 11 weeks 10 weeks
High Performance441 4 days 1 week 4 weeks 5.5 weeks 11 weeks 10 weeks
441 XXL 8 weeks 9.5 weeks 15 weeks 14 weeks
Clean Service481/483 4 days 1 week 6 weeks 7.5 weeks 11 weeks 10 weeks
488 4 days 1 week 6 weeks 7.5 weeks 13 weeks 10 weeks
Critical Service 447 4 days 1 week 4 weeks 5.5 weeks 11 weeks 10 weeks
Modulate Action 433 4 weeks 5.5 weeks 11 weeks 10 weeks
Series 310 310 8 weeks 9.5 weeks 15 weeks 14 weeks
Spare parts 1 day 4 days 3 days 2 weeks 7.5 weeks 6.5 weeks
Options with extended delivery times(Only available from origin German Factory (HOW))
Additional delivery timeAdd to delivery times B, C, and D.
Heating jacket 6 weeks
Special machining of fl ange 1 week
Welded fl anges 4 weeks
Special coating system 2 weeks
Oxygen cleaning – Free of oil and grease 2 weeks
Improved surface quality 2 weeks
Special trim (Hastelloy®, MONEL®, etc.) Consult LESER LLC
CLT
HOW
A
B
C
D
US Germany
Se
rvic
e
197
Freight Charges Freight Charges
Weight [lb] FCA CLT FCA German Factory Weight [lb] FCA CLT FCA German Factory
from toGround Air Sea
from toGround Air Sea
A, C B D A, C B D
0 2 $12 $73 441 460 $237 $1,538
3 4 $13 $83 461 480 $245 $1,584
5 6 $15 $91 481 500 $251 $1,629
7 8 $15 $101 501 550 $264 $1,709
9 10 $16 $110 551 600 $282 $1,821
11 15 $17 $133 601 650 $299 $1,936 $1,562
16 20 $18 $156 651 700 $317 $2,048 $1,601
21 25 $22 $181 701 750 $335 $2,162 $1,641
26 30 $26 $195 751 800 $353 $2,275 $1,680
31 35 $29 $209 801 850 $370 $2,387 $1,720
36 40 $33 $222 851 900 $387 $2,501 $1,759
41 45 $36 $236 901 950 $405 $2,615 $1,799
46 50 $38 $249 951 1,000 $423 $2,726 $1,838
51 60 $44 $276 1,001 1,050 $441 $2,841 $1,877
61 70 $46 $303 1,051 1,100 $458 $2,954 $1,916
71 80 $53 $331 1,101 1,200 $483 $3,123 $1,995
81 90 $63 $358 1,201 1,300 $520 $3,348 $2,074
91 100 $72 $386 1,301 1,400 $555 $3,575 $2,153
101 110 $78 $412 1,401 1,500 $590 $3,802 $2,231
111 120 $86 $452 1,501 1,600 $625 $4,029 $2,310
121 130 $96 $489 1,601 1,700 $660 $4,255 $2,389
131 140 $102 $528 1,701 1,800 $697 $4,480 $2,468
141 150 $112 $561 1,801 1,900 $732 $4,708 $2,546
151 160 $133 $904 1,901 2,000 $767 $4,934 $2,625
161 170 $137 $929 2,001 2,200 $820 $5,274 $2,783
171 180 $141 $953 2,201 2,400 $890 $5,727 $2,940
181 190 $144 $976 2,401 2,600 $961 $6,179 $3,098
191 200 $147 $999 2,601 2,800 $1,032 $6,632 $3,255
201 220 $152 $1,034 2,801 3,000 $1,102 $7,085 $3,413
221 240 $159 $1,082 3,001 3,200 $1,172 $7,537 $3,570
241 260 $167 $1,129 3,201 3,400 $1,244 $7,990 $3,728
261 280 $173 $1,176 3,401 3,600 $1,314 $8,443 $3,885
281 300 $180 $1,222 3,601 3,800 $1,384 $8,896 $4,043
301 320 $188 $1,269 3,801 4,000 $1,455 $9,348 $4,200
321 340 $195 $1,316 4,001 4,200 $1,525 $9,801 $4,358
341 360 $201 $1,363 4,201 4,400 $1,596 $10,254 $4,515
361 380 $208 $1,410 4,401 4,600 $1,668 $10,707 $4,673
381 400 $216 $1,458 4,601 4,800 $1,738 $11,159 $4,830
401 420 $223 $1,505 4,801 5,000 $1,808 $11,613 $4,988
421 440 $229 $1,551
Freight Charges
Se
rvic
e
ServiceServiceUS Prepaid Freight Charges
If LESER’s prepaid freight service is selected the charges listed in the chart below will be used depending on the delivery method.Please see page 198 for an explanation of the delivery methods. The charges listed below are only valid for the contiguous UnitedStates. LESER reserves the right to institute a fuel surcharge on shipments, if necessary, due to a signifi cant increase in transportation costs from our transportation providers.
Use airfreight
Use airfreight
Note: All prices quoted on this page are net prices in $
198
Se
rvic
e
Contact, Ordering and DeliveryContact, Ordering and Delivery
ContactFor inquiries, orders, technical assistance etc. please contact LESERs local representative.If local rep is unknown, please see www.leser.com or ask LESER LLC.
Delivery time Delivery time is indicated in this “Prices” by highlighting article numbers and prices in red.
Example:
Delivery 1 week (FCA Charlotte, NC). If requested, same day delivery is possible, please ask.
Delivery 12 weeks (FCA Charlotte, NC). If shorter delivery times (minimum 4 weeks to site) are required, there will be additional charges for air freight.
Spare parts available for next day delivery.
Please refer to pages 193 and 194.
Terms of delivery All prices are net 30 days, FCA Charlotte, NC, packing included.
Ordering Following information is needed to process your order properly:
Safety valves
For ordering safety valves please use order codes shown in the “How to order” for various LESER products.
Springs
Please indicate valve type and size or 8 digit valve article number (yyyy.yyyy) and set pressure.
Spare parts
Please indicate 11 digit part number (xxx.xxxx.xxxx). You can fi nd part numbers in the product catalogs.
If part number is not available, please state 8 digit valve article number (yyyy.yyyy; can be taken from order
confi rmation or name plate) and part item number (see product catalog, materials section).
Material test Certs • Material test Certs 3.1 are available for almost every component of LESER safety valves. Please specify with your order.
• If Certs are requested after delivery, please contact LESER LLC. You will get the requested Certs within 24 hours.
LESER authorized repair centers (LARC) • LESER has designated “LESER authorized repair centers (LARC)” throughout the country.
Please see www.leser.com for all LARC´s.
• LARC’s provide local service and repair for LESER products with factory trained personnel.
• All LARC’s are VR stamp holder or assembler for LESER valves.
Coding All valves sold in the US carry UV and NB stamp according to ASME code Section VIII.
CRN numbers for Canada can be applied and further to that LESER safety valves are
in compliance with PED 97/23 (CE-marking) without any changes necessary.
Errors and omissions excepted.
4412.4812
$1,203
5262.0015
$2,058
Spare
parts
ContentsContents
Page
General
The Company 4
Spotlight 5
News 6
Valve finder 14
How to use 15
Glossar – LESER Option codes 17
How to order 38
Compact Performance 40
Safety Relief Valve 437, 437 Long version 42
Safety Relief Valve, O-ring-disc 438, 438 Long version 43
Safety Relief Valve, vulcanized soft seal
439 44
Overview connections • Threaded – NPT, G/BSPP• Flanged – ANSI
Series 437 45
Safety Relief Valve 459 46
Safety Relief Valve, O-ring-disc 462 48
Safety Relief Valve 459 Heavy duty design 50
Overview threaded connections NPT, G/BSPP
Series 459 52
Overview flanged connections ANSI
Series 459 53
Spare parts Series 437 54
LESER Original Spare Parts Kits Series 459, 462 56
Spare parts Series 459 57
Soft seal selection Series 437, 459 59
Available options Series 437, 459 60
Page
API 61
Safety Relief Valve 5262 WCB 62
Safety Relief Valve 5264 CF8M 64
Safety Relief Valve 5267 WC6 66
Safety Relief Valve 5263 LCB 68
Safety Relief Valve 526X SAFUREX 70
Options Series 526 71
Sour gas service – NACE Series 526 74
Outlet flange rating class 300 Series 526 76
Flange facings Series 526 78
Weights Series 526 79
Flange drillings acc. to DIN Series 526 80
LESER Original Spare Parts Kits Series 526 82
Spare parts Series 526 83
Soft seal selection Series 526 97
Available options Series 526 98
API High Performance
Compact
Performance
High Efficiency 99
Safety Relief Valve WCB 8112 – Pop Action 100
Safety Relief Valve CF8M 8114 – Pop Action 102
Safety Relief Valve LCB 8113 – Pop Action 104
Options 811 106
Safety Relief Valve WCB 8212 – Modulate Action 110
Safety Relief Valve CF8M 8214 – Modulate Action 112
Safety Relief Valve LCB 8213 – Modulate Action 114
Options 821 116
Weights 811, 821 120
Flange drillings 811, 821 122
Flange facings 811, 821 123
Inspections, Certificates 811, 821 123
LESER Original Spare Parts Kits 811, 821 124
Available options 811, 821 128
High Efficiency
2 199
Se
rvic
e
Sizing software for safety valves
VALVESTAR®, the sizing program for safety valves developed by LESER, supports all leading worldwide codes and standards. In addition to calculations and sizing, the program provides user-designed and configurable individual reports for technical documentation and archiving. VALVESTAR® is unique in form, functionality and quality.
Program highlights
Sizing:
• Sizing of safety valves according to leading worldwide codes and standards such as: API 520, ASME VIII, ISO 4126, AD 2000-Merkblatt A2
• Calculation of two-phase flow in accordance with API 520 Appendix D ( -method) and fire case in accordance with API 521
• Evaluation of inlet pressure drop, built-up back pressure in pipework, reaction forces and noise levels
Reports:
• Multiple report types, e.g. project report, single page report
• Customizable design of report layouts (company logo, address etc.)
• Variety of data export formats, e.g. XLS, RTF, PDF, etc.
• Integrated material part lists and sectional drawings for all LESER safety valves
Design and handling:
• A user friendly Wizard function leads user step-by-step through the calculations
• Microsoft .Net based architecture offers the latest graphical user interface for easy handling and enhanced performance
Settings:
Customizable user interface:
• User specified profile settings with preselection of units, calculation methods etc.
• More than 15 available languages
VALVESTAR® Web:
• Online calculation for safety valves and projects at www.valvestar.com without any software installation
VALVESTAR®VALVESTAR®
LESER GmbH & Co. KG20537 Hamburg, Wendenstr. 133-13520506 Hamburg, P.O. Box 26 16 51
Fon +49 (40) 251 65-100Fax +49 (40) 251 65-500
E-Mail: [email protected]
VALVESTAR®VALVESTAR®
The-Safety-Valve.com
For free
Pri
ce
s 2
015
US Order and Pricing Information,
valid from April 1, 2015 until March 31, 2016
The-Safety-Valve.com
PricesPrices
The-Safety-Valve.com
10615 Texland Boulevard, Suite 100
Charlotte, NC 28273, USA
Fon +1 (704) 587-3670
Fax +1 (704) 587-3672
LESER LLC E-Mail: [email protected]
www.leser.com
US
0777.5460Edition April 2015/4,000
20152015
LESER worldwideLESER worldwide
LESER USA
Charlotte (NC) [email protected]
LESER Germany
Hamburg [email protected]
LESER France
LESER China
Tianjin, Beijing, Shanghai and [email protected]
LESER Singapore
LESER India
Mumbai and [email protected]
LESER Bahrain
LESER Brazil
Rio de [email protected]
LESER stock and local assembly
LESER representative
LESER UK
Bristol, United [email protected]
André Ramseyer AG
Flamatt, [email protected]
LESER Polska
Poznan, [email protected]