innovation > technology > future

teknaEVOsolenoid dosing pumps

The evolution of solenoid dosing pumps

CompatiblePVDF pump head and ceramic ball valve asstandard

Full chemical compatibility

PVDF is suitable for almost all chemical used in theIndustrial, Waste Water Treatment and potable Waterapplications

The use of Ceramic balls as standard improves thepumping reliability and the chemical compatibility ofthe whole liquid end

evo

Inventory Reduction

Reduce spares stock holding

2 versions: analogue and digital

3 models that cover 1,06 to 14,27 gph with anoutput pressure up to 174 psi

1 Casing allows skids to be pre-constructed, as thefixing points remain constant, and the pumps can beselected on confirmation of the dosing flow

flow rate from 1,06 to 14,27 gphflow rate from 1,06 to 14,27 gph

evo

CleverJust 2 Versions and 3 Models, Just PVDF, All functions in one pump

Models

603

800Models

803

2 water & industry > solenoid dosing pumps tekna evo

3innovation > technology > future

The advanced design and manufacturing processallows the diaphragm to have a unique lifeexpectancy

Made of pure solid PTFE, the diaphragm iscompatible with most chemicals

The diaphragm has been tested over a period of 5years giving superior results

Routine diaphragm replacement is no longer arequirement

Reduced maintenance

Full chemical compatibilityevo

Reduced power consumption as the solenoid onlydraws the required power to activate the pump, basedon the working conditions

Stable dosing performance: improve pump efficiencyas performance is not affected by power supply fluctuations

Reduce inventory holding

evo

Intuitive programmingA new concept of programming menu

ReliableLong life diaphragm tested to give 5 yearsworking life

Steady Dosing PerformanceStabilized Multi Power Supply100 to 240 Vac 50/60 Hz withreduced consumption

Programming menu are self explanatory and availablein 5 languages

Intelligent Display, once a function is selected thepump will only display the parameters to set, whichare linked to the selected function

Reduced programming timeevo

4 water & industry > solenoid dosing pumps tekna evo

Analogue Version

teknaEVOAKL

costant dosage with level control input FPM

Analog dosing pump with constant flow rate andanalog interface

Flow rate manually adjustable by knob on the frontpanel, two frequency range (0 to 20% - 0 to 100%),Power-ON led indicator

Level control input

Manually priming valve

PTFE diaphragm. Standard pump head in PVDF

Case made in PP reinforced with fiber glass.NEMA 4X rated

Complete standard installation kit composed by:PVDF foot filter and injection valve, PVC suction tube,PE delivery tube

Standard power supplyMultivoltage 100-240 Vac 50-60 Hz

5innovation > technology > future

Digital Version

teknaEVO TPG

proportional dosage with level control input FPM

Digital interface version; Timer function; Ppmproportional dosing; Statistics; Password; Input On-Off(remote control). Constant flow rate manuallyadjustable, proportional flow rate according to anexternal analog (4-20 mA) or digital signal (watermeter)

Level control input

Manually priming valve

Fast extractable electric connections protected by a lid

PTFE diaphragm. Standard pump head in PVDF

Case made in PP reinforced with fiber glass.NEMA 4X rated

Complete standard installation kit composed by:PVDF foot filter and injection valve, PVC suction tube,PE delivery tube

Standard power supplyMultivoltage 100-240 Vac 50-60 Hz

ESCstartstop

PROGmodeenter

Alarm

6 water & industry > solenoid dosing pumps tekna evo

100 to 240 Vac 50-60 Hz

AKL 603 N H H 0 U00

AKL Analogue dosing pump with constant flow rate manually adjustableAnalogue

TPG Digital dosing pump with constant flow rate manually adjustable, with proportional flow rate according to an externalanalog (4 to 20 mA) or digital signal (water meter)

Digital

VersionInterfaceCode Description

ModelCode Pressure

[psi]Flow rate

[gph]Fequency max[stroke./min]

Stroke capacity[cc/stroke]

Ø ConnectionsIN / OUT [inches]

Consumption[W]

Power supplyCode

N

Pump head materialCode Balls DiaphragmPump head Connections

H Ceramic PTFEPVDF

Installation KitCode

H PVDF

SealsCode Materials

0 FPM

OptionsCode Description

U00 Standard

Code

Materials

17414511629

1,061,321,592,11

160

0,110,140,170,22

0.17” x 1/4” 12,2603

1741457215

1,852,643,964,76

300

0,100,150,220,26

0.17” x 1/4” 23,9800

72582915

5,286,6110,5714,27

300

0,290,370,590,79

5/16” x 7/16” 22,2803

C

A

D

B

7innovation > technology > future

Flow Rate and Dimensional Drawings

5.87”

Pressure[psi]

FlowRate[gph ]

Model

603800803

9.09” 4.68” 5.71” 10.12”

A(Height) [inches]

B(Width) [inches]

C(Depth) [inches]

D(Max Height) [inches]

BRO EVOUSA 09.1The technical data may be altered without prior warning. The drawings and images are for illustrative purposes only.

SEKO do Brasil BRAZIL • SEKO CHINA • SEKO DENMARK • SEKO/LEFRANC-BOSI FRANCE • SEKO Deutschland GERMANY • SEKO Italia ITALYSEKO SIETA ROMANIA • OOO SEKO RUSSIA • SEKO Asia Pacific SINGAPORE • SEKO Iberica SPAIN • SEKO SOUTHERN AFRICA • SEKO SWEDENSEKO/CCL UNITED KINGDOM • SEKO Dosing Systems USA

SEKO DOSINGSYSTEMS CORP.Tel.: (215) 945 0125

Fax: (215) 945 0937

Toll Free: (866) 651 4323

Web site: www.sekousa.com

Email: sales@sekousa.com