Date post: | 22-Jul-2016 |
Category: |
Documents |
Upload: | lamba-techno-flooring-solutions |
View: | 213 times |
Download: | 0 times |
Use of High-Tech Construction Equipment in Laying Industrial & Warehouse Floors
ConstruCtion EquipmEnt
We at LTFSPL use cutting edge technology of laying
floors with Laser Screed (Large line laser screed
with a telescope boom of 6.1 M - Model S15 R) &
Copperhead (Small line Laser Screed machine) which does not
require guide rails to screed concrete, it eliminates the need
of having form work at regular intervals except at day joint
thus making wide bay construction of pore size 500 to 2000 M2.
This reduces construction joints by say 80% which is the weakest
section of a floor. Large Pour floors can be constructed to
tolerance of TR-34 FM 2 (In free-movement floors, MHE can
travel randomly in any direction).
Where suitable floors are designed based on Steel fibre
solution or conventional steel bar reinforcement for floors resting
on ground.
Glued Steel Fibre Reinforced Concrete (SFRC)-provides you
with a time saving and cost efficient solution for flooring. Being
Multi dimensional reinforcement it offers following advantages:-
– Optimal Load bearing
– Optimal Crack control
– High fatigue resistance
– High impact resistance
Get More Out of Your Slab
– Easier to maintain
– Longer lifespan
– Optimized Thickness
62 CE&CR JunE 2015
An ideal floor would be perfectly flat and level and have no joints.
ConstruCtion EquipmEnt
CE&CR JunE 2015 63
Pradeep Lamba, Director Lamba Techno Flooring Solutions Pvt. Ltd.
E-mail: [email protected] Web: www.ltfsolutions.co.inMobile: +91 97178 54400
– Timesaving construction
– Better Performance
– The ductile steel fibre floor withstands moderate
deformations; minimizes curling of concrete slab.
– Easier and more accurate installation of Super flat floor.
Surface Finishing by - Latest Of Imported Equipments
Carrying out flatness to tolerances of FM 2 Floor as per TR 34
(UK , Technical Report Guidelines) by using bump-cutter and
check rod etc.,
Imported Top Spreaders
Spreading evenly, non metallic hard top dry shake floor
hardener using mechanized equipments.
Imported Power float equipment like walk behind and Ride-on
Trowel are used for finishing, concrete surface.
All this helps to achieve best possible flatness and has no
chance of error right from the beginning to the end of job.
Floor Surveying
We carry out a level survey on the sub-base with Laser Levels.
For floor (SOG) surveying of casted slabs Automatic Robotic
instrument (FloorPro - Digital Profileograph) is used. Floor Level
& Flatness Survey Report is submitted to ascertain whether the
floor meets the requirements of International Standards of TR-34
& is used to ensure to our clients that we walk the talk.
With a full range
of hi-tech equipment,
experienced and qualified
teams of professionals,
we are able to provide
fine tolerance floor as per
international standards
including TR-34, DIN
15-185 & ASTM 1155,
meeting today’s Defined and Free Movement surface regularity
requirements. With experience of laying more than 1.25 million
M2 of floor in last 4.5 years, we are here to deliver floors as per
International standards.