Used MachinesPRODUCT CATALOGUENovember 2017
11/17/2017
144 Lamp RoadWadevilleGermistonTel: +27 (0) 11 824 0387Cell: +27 (0) 72 834 3164www.metalchipmachinery.co.za
Please contact Malcolm [email protected]+27 (0) 72 834 3164
Product DisclaimerThe product specifications in this catalogue are provided for general information purposes only.
Every precaution is taken in compiling this catalogue in an effort to provide information that is up-
to-date and unbiased. It is not intended as an exhaustive, comprehensive or 100% accurate list of
specifications related to the used machine for sale. The prospective purchaser is responsible for
verifying all specifications before purchase.
No representations or warranties, either express or implied, or of any other nature are made with
respect to information or the product to which the product information pertains. In no case shall the
information be considered a part of our terms and conditions of sale.
Except for any guarantees or warrantees stated in a specific contract of sale, the used machinery
marketed in this catalogue is sold as is and the Seller or his Agent shall not be liable for any
defects in the product, latent or otherwise.
Product IndexClick on product of interest to hyperlink to required page
Machining Centers
Punching Machines
Lathes Guillotines Band SawPipe Cutting Machine
EDM Machines
Johnford VMC 650
TrumpfTrumatic 260
Yang ML55A
ElgaHydrashear
Elite Automatic Band Saw
HGG SPC 1000
Chmer CW 640 wire cutter
MAS MULTICUT 500S
TrumpfTrumatic500R
Yam CK2A
Pinnicle 1050 Machining Centre
Trumpf Trumatic 260
Punching and cropping
DOOSAN DNM 650
TrumpfTrumatic TC 500
FicepA18.36
Lathes – Yang ML55A
Classification Unit Yang ML55A
Swing over bed mm 740
Swing on cross slide mm
Distance between centers mm 1000
Standard turning diameter mm
Maximum turning diameter mm 450
Maximum turning length mm
Bar capacity mm 115
Spindle motor kW
NC System - Fanuc OT
Year of manufacture 1995
Click home to Return to product indexR 920,000 Excl VAT
Ex present location
Lathes – Yam CK2A
Classification Unit Yam CK2A
Swing over bed mm 480
Swing on cross slide mm
Distance between centers mm 500
Standard turning diameter mm 250
Maximum turning diameter mm 350
Maximum turning length mm 600
Bar capacity mm 50
Spindle motor kW
NC System - Fanuc OT
Year of manufacture 1989
Click home to Return to product indexR 340,000 Excl VAT
Ex present location
Machining Centers – Johnford VMC 650
Classification Unit Johnford VMC 650
Table Size mm 800x450
X Axis mm 600
Y Axis mm 500
Z Axis mm 610
Motor Power HP 10
Spindle speed RPM 80-8000
Spindle Taper BT 40
Click home to Return to product indexR 275,000 Excl VAT
Ex present location
Machining Centers – MAS MULTICUT 500S
Classification UnitMAS MULTICUT 500S
Max Turning Diameter mm 1030
Max Turning Length mm 1734
Max workpiece weight kg 3000
Year of manufacture 2007
2x 12 inch spindles
Click home to Return to product indexR 3,500,000 Excl VAT
Ex present location
Machining Centers – Pinnicle 1050 Machining
Centre
Classification UnitPinnicle 1050 Machining Centre
Travel mm
X Axis mm 1050
Y Axis mm 650
Z Axis mm 650
Year 2004
Spindle Motor Kw 15
Spindle Taper BT40
Click home to Return to product indexR 635,000 Excl VAT
Ex present location
Machining Centers – DOOSAN DNM 650
Classification Unit DOOSAN DNM 650
Travel mm
X Axis mm 1270
Y Axis mm 668
Z Axis mm 624
Year 2012
INCLUDING 4th AXIS
Click home to Return to product indexR 850,000 Excl VAT
Ex present location
Punching Machines - Trumpf Trumatic 260
Trumpf Trumatic 260 1993 Model
Max. sheet thickness 6 mm
Max. punching force 250 kN
Speeds X axis -
Speeds Y axis -
Working range 2700x1300mm
CNC control Bosch controller
Click home to Return to product index
R690,000 Excl VAT
Ex present location
Punching Machines - Trumpf Trumatic 500R
Trumpf Trumatic 500R 1995 Model
Max. sheet thickness 8 mm
Max. punching force 220 kN
Speeds X axis 90 m / min
Speeds Y axis 60 m / min
Simultaneous (X and Y) 108 m / min
CNC control Trumpf CNC
Working Range 2535x1280
Click home to Return to product indexR1,300,000 Excl VAT
Ex present location
Punching Machines - Trumpf Trumatic 260
Trumpf Trumatic 260 1993 Model
Max. sheet thickness 3 mm
Max. punching force 250 kN
Speeds X axis 60 m/min
Speeds Y axis 90 m/min
Working range 1300x1600mm
CNC control Bosch controller
Click home to Return to product index
R300,000 Excl VAT
Ex present location
Punching Machines - Trumpf Trumatic TC 500
Trumpf Trumatic TC 500 1996 Model
Max. sheet thickness
Max. punching force
Speeds X axis
Speeds Y axis
Working range 3000 X 1600
CNC control
Including sheet master and retractable clamps
Click home to Return to product index
R1,500,000 Excl VAT
Ex present location
Pipe Cutting Machine - HGG SPC 1000
Classification Unit Pipe Cutting Machine
Model HGG SPC 1000
Max Pipe Diameter mm 1020
Min Pipe Diameter mm 60
Max Pipe length mm 6000
Plasma and Oxy fuel included
Click home to Return to product index
R 2,800,000 Excl VATEx present location
Guillotines – Elga Hydrashear
Classification UnitElgaHydrashear
Table mm 2500 X 6mm
Includes motorized backstop
Click home to Return to product indexR 140,000 Excl VAT
Ex present location
Band Saw – Elite Automatic Band Saw
Classification UnitElite Automatic Band Saw
Clamping capacity
Round mm 340
Square mm 320 x 320
Rectangle mm 320 x 420
Click home to Return to product indexR 40,000 Excl VAT
Ex present location
EDM Machines – Chmer CW 640 wire cutter
Classification UnitChmer CW 640 wire cutter
Travel mm 600 X 400 X 300
Year Year 2005
Click home to Return to product indexR 700,000 Excl VAT
Ex present location
Punching and cropping – Ficep A18.36
Ficep A18.36 Year 2003
Infeed Metre 16
Including 8 Station marking unit
Click home to Return to product indexR 2,900,000 Excl VAT
Ex present location