24" LCD FHDTVUser Guide
MODEL EQ2487F
EQD
EQD
EQD
EQD
18
19
EQD
.
.
EQD
LCD TV
Power Cord
EQD
EQD
EQD
EQD
EQD
Digital Audio System
EQD
EQD
EQD
EQD
EQD
The PICTURE menu includes the following options:
Mode
To select the picture mode between Vivid, Standard, Movie or User.In User Mode, can adjust Brightness, Contrast, Sharpness, Colorand Tint.
Noise ReductionTo adjust Noise Reduction level to Off, Weak, Mediumor Strong.
DCR To turn DCR On or Off.
Aspect Ratio Adjust the aspect ration Full, 4:3, Zoom, Panorama of screen.
Screen Mode In HDMI source, to select screen mode in Video or PC mode.
Color Temp To select the color temperature between Warm, Standard or Cool.
EQD
The AUDIO menu includes the following options:
EQ ModeTo select EQ mode between between Dynamic, Standard, Softand User. In User mode, can adjust EQ level.
Balance To adjust the left and right audio balance.
Audio Select To select the audio from HDMI or PC.
MTS To select Stereo, Mono or SAP mode when watching TV.
Audio Language To select English, Spanish or French when watching DTV.
Auto Volume To select On or Off to turn on auto volume.
Speaker OutputMode
To select audio out to Internal speaker or output connector.
Audio Only To tuner the picture Off or On when watching audio channel.
Channels(for Tuner Source use only)
EQD
The CHANNEL menu includes the following options:
Antenna To select antenna source from Cable or Air.
Scan Mode To select channel scan mode between Auto, Analog or Digital.
Press ENTER to start channel scan. If you choose "cable" underantenna in OSD menu, it will show AUTO/ Standard / HRC / IRCSub-items.
Channel List Press ENTER to select channel list.
Auto Scan
EQD
H. Position To adjust the horizontal position of the screen.
V. Position To adjust the vertical position of the screen.
PhaseTo remove any horizontal distortion and clear or sharpen thedisplay characters.
To adjust the delay time between horizontal synchronous signaland video.
Auto adjust picture’s horizontal position, vertical position, phaseand clock.
Clock
Auto Adjustment
PC
EQD
Setup
The SETUP menu includes the following options:
OSD Language Change the OSD display language between English , Español orFrançais .
Setup Wizard To follow the step by step to setup TV setting.
Time
-Time Zone[Eastern/Central/Mountain/Pacific/Alaska/ Hawaii]
-Clock Mode [Auto/Manual]
-Clock set [Month/Day/Year/Hour/Minute/Daylight Saving](Only for Manual clock mode)
-Sleep time [Sleep off/15mins/30mins/45mins/60mins/90mins/120mins]
EQD
Allows user to select from from analog or digital close caption mode.Close Caption
-CC Style (Only for DTV)
Parental Lock Parental Lock can be used to block channels and changepassword. User can enter any 4 digit password for default setting.
Back Light To adjust back light level.
Default setting To reset TV to factory settings.
-CC mode [CC Off/CC On/On Mute]
-Analog CC{CC1/CC2/CC3/CC4/TEXT1/TEXT2/TEXT3/TEXT4]
-Digital CC [Service1/Service 2/Service 3/Service 4/Service5/Service 6/Service 7-63/Analog CC] (Only for DTV)
EQD
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4.99kg
568 (W) x 210 (H) x 419.7 (D) mm
EQD
23.6”
300
1920x1080
75(Max.)