VE278 Series LCD Monitor

User Guide

April 2012

ii

Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved.No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Table of contentsNotices ......................................................................................................... iiiSafety information ...................................................................................... ivCare & Cleaning ........................................................................................... v1.1 Welcome! ...................................................................................... 1-11.2 Package contents ......................................................................... 1-11.3 Assembling the monitor base ..................................................... 1-21.4 Connect cables ............................................................................. 1-21.5 Monitor introduction .................................................................... 1-3

1.5.1 Front of the LCD monitor ................................................ 1-3

1.5.2 Rear of the LCD monitor ................................................. 1-5

1.5.3 QuickFit Function ............................................................ 1-6

2.1 Detaching the arm/stand (for VESA wall mount) ..............................................................2-1

2.2 Adjusting the monitor .................................................................. 2-23.1 OSD (On-Screen Display) menu ................................................. 3-1

3.1.1 How to reconfigure .......................................................... 3-1

3.1.2 OSD Function Introduction .............................................. 3-1

3.2 Specifications ............................................................................... 3-63.3 Troubleshooting (FAQ) ................................................................ 3-73.4 Supported Timing List ................................................................. 3-8

iii

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• Thisdevicemaynotcauseharmfulinterference,and

• Thisdevicemustacceptanyinterferencereceivedincludinginterferencethatmaycauseundesiredoperation.

ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsare designed to provide reasonable protection against harmful interference inaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewithmanufacturer’sinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnot occur in a particular installation. If this equipment does cause harmful interferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandreceiver.

• Connecttheequipmenttoanoutletonacircuitdifferentfromthattowhich the receiver is connected.

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

AsanEnergyStar® Partner,ourcompanyhasdeterminedthatthisproductmeetstheEnergyStar® guidelinesforenergyefficiency.

Canadian Department of Communications Statement

ThisdigitalapparatusdoesnotexceedtheClassBlimitsforradionoise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

iv

Safety information• Beforesettingupthemonitor,carefullyreadallthedocumentationthat

came with the package.

• Topreventfireorshockhazard,neverexposethemonitortorainormoisture.

• Nevertrytoopenthemonitorcabinet.Thedangeroushighvoltagesinsidethemonitormayresultinseriousphysicalinjury.

• Ifthepowersupplyisbroken,donottrytofixitbyyourself.Contactaqualifiedservicetechnicianoryourretailer.

• Beforeusingtheproduct,makesureallcablesarecorrectlyconnectedandthepowercablesarenotdamaged.Ifyoudetectanydamage,contactyourdealerimmediately.

• Slotsandopeningsonthebackortopofthecabinetareprovidedforventilation.Donotblocktheseslots.Neverplacethisproductnearorover a radiator or heat source unless proper ventilation is provided.

• Themonitorshouldbeoperatedonlyfromthetypeofpowersourceindicatedonthelabel.Ifyouarenotsureofthetypeofpowersupplytoyourhome,consultyourdealerorlocalpowercompany.

• Usetheappropriatepowerplugwhichcomplieswithyourlocalpowerstandard.

• Donotoverloadpowerstripsandextentioncords.Overloadingcanresult in fire or electric shock.

• Avoiddust,humidity,andtemperatureextremes.Donotplacethemonitorinanyareawhereitmaybecomewet.Placethemonitoronastable surface.

• Unplugtheunitduringalightningstormorifitwillnotbeusedforalong period of time. This will protect the monitor from damage due to power surges.

• Neverpushobjectsorspillliquidofanykindintotheslotsonthemonitor cabinet.

• Toensuresatisfactoryoperation,usethemonitoronlywithULlistedcomputers which have appropriate configured receptacles marked between100-240VAC.

• Ifyouencountertechnicalproblemswiththemonitor,contactaqualifiedservicetechnicianoryourretailer.

v

Care & Cleaning• Beforeyouliftorrepositionyourmonitor,itisbettertodisconnectthecables

and power cord. Follow the correct lifting techniques when positioning the monitor.Whenliftingorcarryingthemonitor,grasptheedgesofthemonitor.Donotliftthedisplaybythestandorthecord.

• Cleaning.Turnyourmonitoroffandunplugthepowercord.Cleanthemonitorsurfacewithalint-free,non-abrasivecloth.Stubbornstainsmayberemovedwith a cloth dampened with mild cleaner.

• Avoidusingacleanercontainingalcoholoracetone.UseacleanerintendedforusewiththeLCD.Neverspraycleanerdirectlyonthescreen,asitmaydripinside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:• Thescreenmayflickerduringtheinitialuseduetothenatureofthefluorescent

light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears.

• Youmayfindslightlyunevenbrightnessonthescreendependingonthedesktoppatternyouuse.

• Whenthesameimageisdisplayedforhours,anafterimageofthepreviousscreenmayremainafterswitchingtheimage.ThescreenwillrecoverslowlyoryoucanturnoffthePowerSwitchforhours.

• Whenthescreenbecomesblackorflashes,orcannotworkanymore,contactyourdealerorservicecentertofixit.Donotrepairthescreenbyyourself!

Conventions used in this guide

WARNING:Informationtopreventinjurytoyourselfwhentryingtocomplete a task.

CAUTION:Informationtopreventdamagetothecomponentswhentryingtocompleteatask.

IMPORTANT:InformationthatyouMUSTfollowtocompleteatask.

NOTE:Tipsandadditionalinformationtoaidincompletingatask.

vi

WheretofindmoreinformationRefer to the following sources for additional information and for product and software updates.

1. ASUS websitesTheASUSwebsitesworldwideprovideupdatedinformationonASUShardware and software products. Refer to http://www.asus.com

2. Optional documentationYourproductpackagemayincludeoptionaldocumentationthatmayhavebeenaddedbyyourdealer.Thesedocumentsarenotpartofthestandardpackage.

1-1ASUSLCDMonitorVE278Series

1.1 Welcome!ThankyouforpurchasingtheASUS®VE278SeriesLCDmonitor!

ThelatestwidescreenLCDmonitorfromASUSprovidesacrisper,broader,andbrighterdisplay,plusahostoffeaturesthatenhanceyourviewingexperience.

Withthesefeatures,youcanenjoytheconvenienceanddelightfulvisualexperiencethattheVE278Seriesbringsyou!

1.2 Package contentsCheckyourVE278SeriesLCDpackageforthefollowingitems:

LCD monitor

Monitor base

Quick start guide

warrantycard

1xPowercord

1xVGAcable

1xDVIcable(onlyforVE278N)

1xHDMI-DVIcable(onlyforVE278H)

1xAudiocable(onlyforVE278H)

Ifanyoftheaboveitemsisdamagedormissing,contactyourretailerimmediately.

1-2 Chapter 1: Product Introduction

1.3 Assembling the monitor baseTo assemble the monitor base:1. Attachthebasetothearmandfixwiththescrewtojointhemtightly.Youcan

easilytightenthescrewbyfingers.

2. Adjustthemonitortotheanglethatismostcomfortableforyou.

Werecommendthatyoucoverthetablesurfacewithsoftclothtopreventdamage to the monitor.

1

2

Make sure to screw the base to the arm tightly.

1.4 Connect cablesTo connect cables:

Connectthecablesyouneedbasedonchapter1.5.2,page1-5.

1-3ASUSLCDMonitorVE278Series

1.5 Monitor introduction

1.5.1 Front of the LCD monitor

VE278H

VE278N

6 73 5 81 2

6 74 5 81 2

1. Button:

• Automaticallyadjusttheimagetoitsoptimizedposition,clock,andphasebylongpressingthisbuttonfor2-4seconds(forVGAmodeonly).

• Usethishotkeytoswitchfromsixvideopresetmodes(SceneryMode,StandardMode,TheaterMode,GameMode,NightViewMode,andsRGBMode)withSPLENDID™VideoIntelligenceTechnology.

• ExittheOSDmenuorgobacktothepreviousmenuastheOSDmenuis active.

2. QuickFit Button:

• ThisisahotkeytoactivatetheQuickFitfunctiondesignedforalignment.

• TheQuickFitfunctioncontains7pagesofcommongridpatterns,papersizes,andphotosizes.

3. Button:

• Press this button to decrease the value of the function selected or move tothenextfunction.ThisisalsoahotkeyforContrastadjustment.

1-4 Chapter 1: Product Introduction

4. Button:

• Press this button to decrease the value of the function selected or move tothenextfunction.ThisisalsoahotkeyforVolumeadjustment.

5. MENUButton:

• Press this button to enter the OSD menu.

• Pressthisbuttontoenter/selecttheicon(function)highlightedwhiletheOSD is activated.

6. Button:

• Press this button to increase the value of the function selected or move to the previous functions.

• ThisisalsoahotkeyforBrightnessadjustment.

7. Input Select Button:

• UsethishotkeytoswitchfromVGA,DVI(VE278N),HDMI(VE278H)inputsignal.

8. PowerButton/PowerIndicator:

• Pressthisbuttontoturnthemonitoron/off.

• The color definition of the power indicator is as the below table.Status Description Blue ON Amber Standbymode OFF OFF

1-5ASUSLCDMonitorVE278Series

1.5.2 Rear of the LCD monitor

1 3 4

VE278N

VE278H

21 4 5 6

7

1 AC-IN port2 HDMI port3 DVI port4 VGA port5 Audio - in Port6 Earphone - out Port7 Screw Holes for VESA Wall Mount

1-6 Chapter 1: Product Introduction

1.5.3 QuickFit FunctionTheQuickFitfunctioncontainsthreepatterns:(1)Grid(2)Papersize(3)Photosize.

1. Gridpatterns

Thegridpatternsfacilitatedesignersanduserstoorganizecontentandlayoutonapage and achieve a consistent look and feel.

AlignmentGrid

2. Papersize

QuickFitprovidesnumerouscommonlyusedstandardpapersizesforuserstoviewtheirdocumentsinrealsizeonthescreen.

Letter

1-7ASUSLCDMonitorVE278Series

3. Photosize

ThevariousrealphotosizesdisplayedintheQuickFitfunctionprovidesphotographersandotheruserstoaccuratelyviewandedittheirphotosinrealsizeon the screen.

Photo4x6,3x5,2x2

Photo8x10,5x7

2-1 Chapter 2: Setup

2.1 Detaching the arm/stand (for VESA wall mount)

ThedetachablestandoftheVE278SeriesLCDmonitorisspeciallydesignedforVESAwallmount.

To detach the arm/stand:1. Disconnectpowerandsignalcables.Carefullyput the front of the monitor

face down on a clean table.

2. Useascrewdrivertoremovethe two screws that secure the stand to the monitor.

3. Detach the stand from the monitor.

• Werecommendthatyoucoverthetablesurfacewithsoftclothtopreventdamage to the monitor.

• Holdthestandofthemonitorwhileremovingthescrews.

• TheVESAwallmountkit(100x100mm)ispurchasedseparately.

• UseonlytheULListedWallMountBracketwithminimumweight/load24.4kg(Screwsize:4x10mm).

2-2ASUSLCDMonitorVE278Series

2.2 Adjusting the monitor• Foroptimalviewing,werecommendthatyoulookatthefullfaceofthe

monitor,thenadjustthemonitortotheanglethatismostcomfortableforyou.

• Hold the stand to prevent the monitor from falling while changing its angle.

• Youcanadjustthemonitor’sanglefrom-5˚to20˚.

-5 ~ 20

3-1 Chapter3:GeneralInstruction

3.1 OSD (On-Screen Display) menu

3.1.1 Howtoreconfigure

VE278

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

Scenery Mode

Standard Mode

Theater Mode

Game Mode

Night View Mode

sRGB

1. PresstheMENUbuttontoactivatetheOSDmenu.

2. Press and to navigate through the functions. Highlight and activate thedesiredfunctionbypressingtheMENUbutton.Ifthefunctionselectedhasasub-menu,press and again to navigate through the sub-menu functions.Highlightandactivatethedesiredsub-menufunctionbypressingtheMENUbutton.

3. Press and to change the settings of the selected function.

4. ToexittheOSDmenu,pressthe button. Repeat step 2 and step 3 toadjustanyotherfunction.

3.1.2 OSD Function Introduction1. Splendid

Thisfunctioncontainssixsub-functionsthatyoucanselectforyourpreference.EachmodehastheResetselection,allowingyoutomaintainyoursettingorreturntothepresetmode.

3-2ASUSLCDMonitorVE278Series

VE278

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

Scenery Mode

Standard Mode

Theater Mode

Game Mode

Night View Mode

sRGB

• Scenery Mode:ThisisthebestchoiceforsceneryphotodisplayingwithSPLENDID™VideoIntelligenceTechnology.

• Standard Mode: This is the best choice for document editing with SPLENDID™VideoIntelligenceTechnology.

• Theater Mode: This is the best choice for movie watching with SPLENDID™VideoIntelligenceTechnology.

• Game Mode:ThisisthebestchoiceforgameplayingwithSPLENDID™VideoIntelligenceTechnology.

• Night View Mode:Thisisthebestchoiceforplayingdark-scenegameorwatchingdark-scenemoviewithSPLENDID™VideoIntelligenceTechnology.

• sRGB: This is the best choice for viewing photos and graphics from PCs.

IntheStandardMode,theSaturation,SkinTone,Sharpness,andASCRfunctions are not user-configurable.

InthesRGB,theSaturation,ColorTemp.,SkinTone,Sharpness,Brightness,Contrast and ASCR functions are not user-configurable.

2. ColorSelecttheimagecoloryoulikefromthisfunction.

VE278

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

Brightness

Contrast

Saturation

Color Temp.

90

80

50

User Mode

Natural

OFF

Skin Tone

Smart View

• Brightness: The adjusting range is from 0 to 100. The button is alsoahotkeytoactivatethisfunction.

3-3 Chapter3:GeneralInstruction

• Contrast: The adjusting range is from 0 to 100. The button(OnlyforVE278N)isalsoahotkeytoactivatethisfunction.

• Saturation: The adjusting range is from 0 to 100.• Color Temp.:Containsthreepresetcolormodes(Cool,Normal,Warm)

andoneUserMode.

• Skin Tone:ContainsthreecolormodesincludingReddish,Natural,andYellowish.

• Smart view:TheversatileviewingpositionswithSmartViewTechnology

IntheUserMode,colorsofR(Red),G(Green),andB(Blue)areuserconfigurable; the adjusting range is from 0 ~ 100.

3. ImageYoucanadjusttheimageSharpness,TraceFree(OnlyforVE278H),AspectControl,ASCR,Position(VGAonly),andFocus(VGAonly)fromthismainfunction.

VE278

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

Focus

Sharpness

Trace Free

ASCR

40

60

Position

OFF

Aspect Control Full

• Sharpness: Adjusts the picture sharpness. The adjusting range is from 0 to 100.

• Trace Free: SpeedsuptheresponsetimebyOverDrivetechnology.Theadjustingrangeisfromlower0tofaster100.(OnlyforVE278H)

• Aspect Control:Adjuststheaspectratioto“Full”,“4:3”,“Overscan”.(OverscanisavailableonlyforVE278HHDMIsource)

• ASCR:SelectONorOFFtoenableordisabledynamiccontrastratiofunction.

• Position:Adjuststhehorizontalposition(H-Position)andtheverticalposition(V-Position)oftheimage.Theadjustingrangeisfrom0to100(OnlyavailableforVGAinput).

3-4ASUSLCDMonitorVE278Series

• Focus:ReducesHorizonal-linenoiseandVertical-linenoiseoftheimagebyadjusting(Phase)and(Clock)separately.Theadjustingrangeisfrom0to100(OnlyavailableforVGAinput).

Phaseadjuststhephaseofthepixelclocksignal.Withawrongphaseadjustment,thescreenshowshorizontaldisturbances.

Clock(pixelfrequency)controlsthenumberofpixelsscannedbyonehorizontalsweep.Ifthefrequencyisnotcorrect,thescreenshowsverticalstripesandtheimage is not proportional.

4. Input SelectSelect the input source from VGA,DVI.(VE278N)

VE278

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

VGA

DVI

Select the input source from VGA,HDMI1,HDMI2.(VE278H)

VE278

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

VGA

HDMI1

HDMI2

3-5 Chapter3:GeneralInstruction

5. System SetupAdjuststhesystemconfiguration.

VE278

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

Splendid Demo Mode OFF

Language

Information

50

OFF

English

1/2

Volume

ECO Mode

OSD Setup

VE278

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

2/2

VS239

All Reset

• Splendid Demo Mode: Activate the demo mode for the Splendid function.

• Volume: Adjust the earphone or speaker output volume level. The adjustingrangeisfrom0to100.(OnlyforVE278H.)

• ECO Mode:Activatetheecologymodeforpowersaving.• OSD Setup:Adjuststhehorizontalpostition(H-Position),verticalposition

(V-Position),OSDTimeout,DDD/CI,andTransparencyoftheOSDscreen.

• Language:SelectOSDlanguage.TheselectionsforNon-EUandNon-USversionOSDare:English,TraditionalChinese,SimplifiedChinese,Japanese,Persian,ThaiandIndonesian;TheselectionsforEUandUSversionOSDare:English,German,Italian,French,Dutch,Spanish,Russian,Poland,Turkey,Portugal,Czech,Croatia,Hungary,Romania

• Information:Displaysthemonitorinformation.• All Reset:Selects“Yes”torevertallsettingstothefactorydefaultmode.

3-6ASUSLCDMonitorVE278Series

3.2 Specifications

Model VE278N VE278HPanelSize 27.0”W(68.6cm)

Max.Resolution 1920x1080

Brightness(Typ.) 300cd/m2

IntrisincContrastRatio(Typ.) 1200:1

ViewingAngle(CR≤10) 160°(V);170°(H)

DisplayColors 16.7M(6bitHiFRC)

ResponseTime(Typ.) 5ms(Tr+Tf) 2ms(GraytoGray)

DVIinput DVIwithHDCP No

D-Sub input Yes

HDMI input No Yes

PowerONConsumption 38W 45W

Spk No Yes

Earphone No Yes

Power saving mode < 0.5W

Power off mode < 0.5W

Tilt -5°~+20°

VESAWallMounting Yes(100mmx100mm)

Phys.Dimension(WxHxD) 643x445.6x220

BoxDimension(WxHxD) 732x176x560

NetWeight(Esti.) 6.0 kg

GrossWeight(Esti.) 9.2 kg

VoltageRating AC100~240V(Built-in)

*Specificationsaresubjecttochangewithoutnotice.

3-7ASUSLCDMonitorVE278Series

3.3 Troubleshooting (FAQ)

Problem Possible Solution

PowerLEDisnotON • Press the button to check if the monitor is in the ONmode.

• Checkifthepowercordisproperlyconnectedtothemonitor and the power outlet.

The power LED lights amber and there is no screen image

• Check if the monitor and the computer are in the ONmode.

• Makesurethesignalcableisproperlyconnectedthe monitor and the computer.

• Inspect the signal cable and make sure none of the pins are bent.

• Connect the computer with another available monitortocheckifthecomputerisproperlyworking.

Screen image is too light or dark • Adjust the Contrast and Brightness settings via OSD.

Screen image is not centered or sizedproperly

• Press the button for two seconds to automaticallyadjusttheimage.

• AdjusttheH-PositionorV-PositionsettingsviaOSD.

Screen image bounces or a wave pattern is present in the image

• Makesurethesignalcableisproperlyconnectedtothe monitor and the computer.

• Moveelectricaldevicesthatmaycauseelectricalinterference.

Screen image has color defects (whitedoesnotlookwhite)

• Inspect the signal cable and make sure that none of the pins are bent.

• Perform Reset via OSD.• AdjusttheR/G/BcolorsettingsorselecttheColor

Temperature via OSD.Screenimageisblurryorfuzzy • Press the button for two seconds to

automaticallyadjusttheimage(forVGAmodeonly).• Adjust the Phase and Clock settings via OSD.

Nosoundorsondislow(OnlyforVE278H)

• Makesuretheaudiocableisproperlyconnectedtothe monitor.

• Adjustthevolumesettingsofbothyourmonitorandcomputer.

• Make sure the computer sound card driver is properlyinstalledandactivated.

3-8ASUSLCDMonitorVE278Series

3.4 Supported Timing ListVESA / IBM Modes Support Timing (D-SUB, DVI-D, VE278H HDMI inputs)

Resolution Refresh Rate Horizontal Frequency640x350 70Hz 31.469KHz640x480 60Hz 31.469KHz640x480 67Hz 35KHz640x480 75Hz 37.5KHz720x400 70Hz 31.469KHz800x600 56Hz 35.156KHz800x600 60Hz 37.879KHz800x600 72Hz 48.077KHz800x600 75Hz 46.875KHz848x480 60Hz 31.02KHz1024x768 60Hz 48.363KHz1024x768 70Hz 56.476KHz1024x768 75Hz 60.023KHz1152x864 75Hz 67.5KHz1280x720 60Hz 44.772KHz1280x800 60Hz 49.702KHz1280x960 60Hz 60KHz1280x1024 60Hz 63.981KHz1280x1024 75Hz 79.976KHz1366x768 60Hz 47.712KHz1440x900 60Hz 55.935KHz1680x1050 60Hz 65.29KHz1680x1050 60Hz 64.674KHz1920x1080 60Hz 67.5KHz1920x1080 60Hz 66.587KHz

HDMI 1.3 CEA-861 Formats Supported Timing (for VE278H HDMI input)Resolution Refresh Rate Horizontal Frequency640x480P 59.94/60Hz 31.469/31.5KHz720x480P 59.94/60Hz 31.469/31.5KHz720x576P 50Hz 31.25KHz1280x720P 50Hz 37.5KHz1280x720P 59.94/60Hz 44.955/45KHz1440x480P 59.94/60Hz 31.469/31.5KHz1440x576P 50Hz 31.25KHz1920x1080i 50Hz 28.125KHz1920x1080i 59.94/60Hz 33.716/33.75KHz1920x1080P 50Hz 56.25KHz1920x1080P 59.94/60Hz 67.433/67.5KHz

* The modes not listed in the above tables may not be supported. For optimal resolution, we recommend that you choose a mode listed in the above tables.