User Manual EN

HSDPA wireless card user manual

HSDPA Wireless Card User Manual

Date:2009-2-19

1


Table of contentsChapter 1 Production info.................................................................................................................3

1.1 Feature summarize..............................................................................................................3

1.1.1 A USB type wireless card.................................................................................3

1.1.2 Phone and Message..................................................................................................3

1.1.3 HSDPA services.......................................................................................................3

1.1.4 Packing list...............................................................................................................4

1.2 System requirement............................................................................................................4

1.3 Production specification......................................................................................................4

1.3.1 Network...................................................................................................................4

1.3.2 Output power...........................................................................................................4

1.4 Production character...........................................................................................................4

1.5 Card application requirement..............................................................................................5

1.5.1 Indicator light...........................................................................................................5

1.5.2 Operation environment............................................................................................5

1.6 Production figure................................................................................................................6

1.7 Before you can begin using Flying-HOT............................................................................6

Chapter 2 Prepare Flying-HOT.........................................................................................................7

2.1 Inserting SIM card and T-flash card....................................................................................7

2.2 Remove SIM card and T-flash card.....................................................................................9

Chapter 3 Installation......................................................................................................................11

3.1 System requirement...........................................................................................................11

3.2 Connect Flying-HOT to PC...............................................................................................11

3.3 Install driver and software.................................................................................................12

Chapter 4 Software info..................................................................................................................17

4.1 Mass storage mode............................................................................................................17

4.1.1 WellPhone Explore.................................................................................................18

4.2 Modem mode....................................................................................................................21

4.2.1 Main window.........................................................................................................22

4.2.2 Internet option........................................................................................................24


Messages.................................................................................................................26

Contacts..................................................................................................................28

Calls........................................................................................................................30

4.2.4 Dialer.....................................................................................................................31

4.3 Settings.............................................................................................................................32

4.3.1 General...................................................................................................................32

4.3.2 Connections (Dial-up)............................................................................................33


4.3.4 Live update............................................................................................................36

4.3.5 Expert settings........................................................................................................36

4.3.6 HSDPA settings......................................................................................................36

Chapter 5 Care and maintenance you card......................................................................................38

Chapter 6 Disconnect Flying-HOT from PC..................................................................................39

2


Appendix Glossary.........................................................................................................................40

Chapter 1 Production info

Thank you for using HSDPA wireless card. Before using the HSDPA wireless card, please read our

user manual, it will help you finish the installation and know how to use our software. In the

following, the driver installation and the user manual are presented with as much precision as

possible.

1.1 Feature summarize

HSDPA wireless card is used under the HSDPA network. The modem function is compatible with

USB. The data transmission speed could be up to 7.2 Mbps. So using the HSDPA wireless card we

could connect the internet with high speed. The HSDPA wireless card connection provides access

to the Internet. Once the connection is established, you can open internet explorer and connect to

any web site available on the Internet, or access other Internet services (such as e-mail). Also it

can supply the functions of wireless communication, such as phone book, short message. The

software of this wireless card will be updated in future. The functions which were updated will be

more and more security and reliable.

1.1.1 A USB type wireless card

The HSDPA wireless card can connect with most PCs by USB data line. Once installed and

configured, the HSDPA wireless card connects to the high-speed third generation (3G) HSDPA

wireless network. You just insert the HSDPA wireless card, click connect button, then launch your

internet browser-you are on –line!

1.1.2 Phone and Message

Short message service (SMS) is also available to exchange brief text messages with other HSDPA

subscribers.

1.1.3 HSDPA services

The HSDPA wireless card operates over a type of wireless network called HSDPA. HSDPA

technology provides a variety of connectivity features, depending on your service provider and

account.

3


1.1.4 Packing list

The HSDPA wireless card package box contains the following items:

USB cable

Earphone

1.2 System requirement

30MB hard disk space

USB driver

PCs running Windows XP, Windows Vista

Details refer to chapter 3.1 System requirement

1.3 Production specification

1.3.1 Network

UMTS 2100: Uplink 1920~1980MHz

Downlink 2110~2170MHz

EGSM 900: Uplink 880~915MHz

Downlink 925~960MHz

DCS 1800: Uplink 1710~1785MHz

Downlink 1805~1880MHz

PCS 1900 Uplink 1850~1910 MHz

Downlink 1930~1990 MHz

1.3.2 Output power

HSDPA/UMTS 2100: Output power level class 3 (24 dBm)

EGSM 900: Output power level class 5 (32dBm)

DCS 1800: Output power level class 0 (30 dBm)

PCS 1900: Output power level class 0 (30 dBm)

1.4 Production character

1. SIM card and HSDPA wireless card could be separate

2. Internet function under the HSDPA network, web and E-mail

4


3. Data service

4. SMS

5. Additional function of SIM card

6. Phone record

7. Contacts

8. Calculate the packet data base on the flux

9. Circuit Switched data

10. Dial up net working

11. Application software

12. T-flash card

1.5 Card application requirement

1.5.1 Indicator light

We can know the working state of the HSDPA wireless card through the indicator light

Red: no service

Green: log on the network

Yellow: connecting to internet

Wink as Green: have a incoming call

1.5.2 Operation environment

Operating temperature: -20oC ~ +55oC

Storage temperature: -30oC~ +65oC

Humidity: 93%

Vibration (non-operating): 15g peak, 10Hz to 500kHz

1.6 Production figure

5

Indicator lightUSB data line jackEarphone jack


1.7 Before you can begin using Flying-HOT

Before you can use the HSDPA wireless card for the first time you must:

1. Insert the SIM into the HSDPA wireless card

2. Connect the HSDPA wireless card with your PC by USB data line.

6


Chapter 2 Prepare Flying-HOT

2.1 Inserting SIM card and T-flash card

To install your SIM card and T-flash card into the HSDPA wireless card, follow these steps:

1. If your SIM is attached to a card, detach it and remove any fragments of the card stuck to the

SIM.

2. Press and hold the button in the back of HSDPA wireless card, then open the back cover down

and remove it from the wireless card.

3. Insert T-flash card into slot on the left side of the HSDPA wireless card.

1) Push the T-flash card holder in the direction as following Fig;

2) Open the holder;

7


3) Insert the T-flash card into the properly position as following Fig;

4) Close the holder, and push it until it snaps into position.

4. Insert SIM card into the thin SIM card slot on the right side of the HSDPA wireless card as

following Fig. Make sure that the SIM card is properly inserted and that gold-colored contact area

on the card is facing downwards.

8


5. Put the back cover upward until fully clinched as following Fig shown

2.2 Remove SIM card and T-flash card

Remove the SIM card as following step:1) Press the clip and push the SIM card out;

2) Push the SIM card out gently.

9


Remove the T-flash card as following steps:1) Push the T-flash card holder in the direction as following Fig;

2) Open the holder and take out the T-flash card from the slot;

3) Close the holder, and push it until it snaps into position.

10


11


Chapter 3 Installation

3.1 System requirement

The Flying-HOT wireless card is supported on:

Windows XP (Home and Professional versions)

Windows vista (Home and Business versions)

To install the Flying-HOT wireless card, you should require these computer system

resources:

1. 30MB hard disk space

2. USB driver

3. PCs running Windows XP, vista

3.2 Connect Flying-HOT to PC

Use the USB cable to connect HSDPA to the PC. The following figure shows the USB cable.

Do the following to connect HSDPA to the PC:

1. Connect the Mini-USB plug of the USB cable to the USB interface of HSDPA.

12


2. Insert the main plug to the USB interfaces of the PC.

3. Make sure that it is connected to the USB interface of the PC.

13


3.3 Install driver and software

Connect HSDPA wireless card with PC by USB data line, the driver and software will be installed automatically as following steps:1. First, you must select a language to install.

2. Select a language, the click [OK] to start install.

14


3. You can press [Cancel] key to cancel install.

4. Click [Next] to continue.

5. Confirm accept the end user license agreement, and then click [Next].

15


6. Click [Browse], select an install path, and then click [Next].

7. Then click [Install] to start install.

16


8. In the installing status, it will take you a few minutes.

9. After a few moment this menu will pop up and than press [Finish] to complete the

installation

17


18


Chapter 4 Software info

When HSDPA connect with PC, and it is detected as mass storage mode, a wizard is displayed and

offers you a choice between a number of different actions.

From this wizard, you can make perform the following actions:

Do nothing: enter main window simply access these different functions via the main

window. Refer to Chapter 4.1 Mass storage mode

Explore the device (files): enter the WellPhone Explorer window. Refer to chapter 4.1.1

WellPhone Explore.

Switch to modem mode: switch HSDPA as modem mode. Refer to Chapter 4.2 Modem

mode

Always ask: display the list of actions that you want to carry out when HSDPA is detected.

4.1 Mass storage mode

The main window of Mass storage mode contains numerous buttons or icons as following, each

one of which has a particular function.

19


A click on this button launches the WellPhone Explorer module. You can manage your

data saved in the T-flash card (tool tips: WellPhone Explorer);

Note: if you have no T-flash card in HSDPA, you can’t do any operation in WellPhone Explorer

modules.

Refer to chapter 4.1.1 WellPhone Explore.

A click on this button makes HSDPA detected as modem mode (tool tips: Switch to

modem mode);

Refer to Chapter 4.2 Modem mode

4.1.1 WellPhone Explore

Click on this button launches the WellPhone Explorer module as following:

20


In the left side, display the folder list saved in T-flash, and in the right side, display the files saved

in the selected folder.

The toolbar contains different buttons depending on the type of element select. It is just below the

menu bar at the top of the window of the WellPhone Explorer module. The availability of the

buttons on the toolbar depends on the status of the elements listed.

The message toolbar is composed of:

Add file(s), this makes it possible to add files from PC to T-flash card;

Modify, this makes it possible to modify the downloaded picture files;

Delete, this makes it possible to delete files from T-flash card;

Download, if the selected file has been downloaded, this makes it possible to download this

file from T-flash card;

Download all, this makes it possible to download all files from T-flash card;

Export…, you can select this option from File in the menu bar, and this make it possible to

export files from T-flash card to PC.

For image file, after download from T-flash card, WellPhone Explore show it as:

21


For sound or video file, after download from T-flash card, WellPhone Explore show it as:

22


, this makes it possible to play sound or video;

, during playing status, this makes it possible to pause;

, during playing status, this makes it possible to stop.

4.2 Modem mode

When HSDPA connected with PC, and it is detected as modem mode, a wizard is displayed and

offers you a choice between a numbers of different actions.

From this wizard, you can make perform the following actions:

Do nothing, enter main window simply access these different functions via the main

window. Refer to Chapter 4.2.1 Main window

Place a phone call: enter dialer pad to make voice call. Refer to chapter 4.2.4 Dialer

Explore the device (contacts, SMS, files, ...): enter the WellPhone Explorer window. Refer

to chapter 4.2.3 WellPhone Explore.

Connect to the Internet: launches the default connection. Refer to Chapter 4.2.2 Internet

option.

23


Switch to mass storage mode: switch HSDPA as mass storage mode. Refer to chapter 4.1

Mass storage mode

Always ask: display the list of actions that you want to carry out when HSDPA is detected.

4.2.1 Main window

The main window of Modem mode contains numerous buttons or icons as following, each one of

which has a particular function.

Icons

indicates the level of the network signal (tool tips: Network signal level);

The name of the operator detected is shown in the right side of network signal icon.

Buttons

A click on this button launches the Internet connection corresponding to the default

connection profile (tool tips: Click here to connect to Internet).

Refer to Chapter 4.2.2 Internet option

When a connection is active, a click on this button stops the current connection (tool tips:

Click here to disconnect from Internet).


makes it possible to close WellPhone XT (tool tips: Close the window);

24


makes it possible to minimize the WellPhone XT window (tool tips: Minimize Dashboard).

The application remains active in the background;

makes it possible to enter help window (tool tips: Help)

makes it possible to enter home page: http://www. vivo .com .br / (tool tips: Connection to

home)

A click on this button launches the WellPhone Explorer module. You can thus retrieve and

manage your message, contacts and calls (tool tips: WellPhone Explorer);

Refer to chapter 4.2.3 Wellphone Explore

A click on this button launches the Dial pad. You can make a call and dial voice mail in

this window (tool tips: Dialer);

Refer to chapter 4.2.4 Dialer

A click on this button makes HSDPA detected as mass storage mode. If you insert T-flash

card in the HSDPA, you can use it as U-Disk to storage or export data (tool tips: Switch to mass

storage mode);

Refer to chapter 4.1 Mass storage mode

A click on this button launches the connection corresponding to the default connection

profile, then launches the mail client installed by default (tool tips: You can thus retrieve/send your

e-mails (information box: Default mail);


A click on this button launches the connection corresponding to the default connection

profile, then launches the Internet browser installed by default. You can thus surf as you wish (tool

tips: Default Internet browser);


The Menu

A click on this button opens the preferences and tools menu (tool tips: Settings).

From this menu, you can select:

WellPhone Explorer:

This list contains the telecommunication devices that have previously been recognized by

WellPhone XT; the telecommunication device shown in boldface is the one that is connected to

25

http://www.vivo.com.br/


your computer (HSDPA). For unconnected telecommunication devices, you can use their data, but

you cannot update them until you connect them to your computer. When you select a

telecommunication device, the WellPhone Explorer module for that telecommunication device is

launched.

Modem connection:

This list contains HSDPA detected as well as the operator connection profiles corresponding to

your subscription. It makes it possible to establish a data connection by choosing a specific

connection profile.

Operator selection…:

This option will show the operator list available, and you can select a connection profile to use.

Connection history...:

This option enables you to know all connections made from WellPhone XT, as well as different

information related to these connections.

Check for updates…:

Check the update status of WellPhone XT

Restart in diagnostic mode...:

This option enables you to send us trace files of WellPhone XT in the case of malfunction.

Settings...:

You can define your preferences. Refer to chapter 4.3 Settings

Help...:

This option enables you to launch the help of WellPhone XT.

About...:

This option enables you to know the version of WellPhone XT.

4.2.2 Internet option

Establishing an Internet Connection

WellPhone XT allows you to establish a connection by simply clicking on the button in

the main window (tool tips: Click here to connect to Internet).

The connection will be established using the default connection profile linked to your computer.

The following connection steps are then carried out:

A dialogue box whose title is the name of the connection used then appears. This dialogue

26


box shows you the different steps of the connection. You can cancel the connection process

by clicking on Cancel or by directly closing this dialogue box.

Once you are connected, a statistics window appears and the connection button is

replaced by the disconnection button (tool tips displayed: Click here to disconnect

from Internet). The statistics window gives you information on the connection in progress.

You can show more statistics by clicking on the Statistics button in this window, or

completely close this window without disconnecting.

Launching the WEB ExplorerTo launch the browser installed by default, click on the following Internet icon:

(tool tips: Default Internet browser).

The connection is made in the same way as in the "Establishing an Internet Connection" chapter.

The browser installed by default is launched when the connection is established. Each new click

on the internet icon opens a new window.

Launching the Mail ClientTo launch your mail client installed by default, click on the following Mail icon:

(tool tips: Default mail).

The connection is made in the same way as in the "Establishing an Internet Connection" chapter.

The mail client installed by default is launched when the connection is established.

Closing the ConnectionYou can end your Internet connection in different ways:

by clicking on the disconnect button: (tool tips: Click here to disconnect from

Internet);

by clicking on the Disconnect button in the statistics window.

When you disconnect, the browser installed by default and the mail client are not closed; you have

to exit these applications manually.

Displaying the Connections Log

From the menu (tool tips: Settings), click on Connection history....

The window displays all UMTS/EDGE/GPRS and GSM connections made from WellPhone XT

and the associated statistics, such as the duration of the connection and the incoming and outgoing

volumes

27



Click on this button launches the WellPhone Explorer module as following:

WellPhone Explorer enables you to manage all data contained in HSDPA, include messages and

contacts.

The main window of the WellPhone Explorer module appears. This contains numerous buttons or

icons, each one of which has a specific function.

Messages: you can send and receiver SMS in this module, and manage SMS saved in SIM

card also. Refer to Messages

Contacts: you can manage contacts saved in SIM card, as well as the contacts from your

mail client. Refer to Contacts

Calls: this module contains calls list dialed or received from WellPhone XT, and you can

manage call list. Refer to Calls

MessagesMessage module main window is shown as:

28


this means that the SMS saved in the SIM card;

this means that the SMS saved tin the WellPhone XT;

this means that the SMS received from WellPhone XT.

The toolbar contains different buttons depending on the type of element select. It is just below the

menu bar at the top of the window of the WellPhone Explorer module. The availability of the

buttons on the toolbar depends on the status of the elements listed.

The message toolbar is composed of:

New SMS, this makes it possible to open the SMS editor as following and write and send an

SMS to one or more recipients;

29


Delete, this makes it possible to delete the current, selected message;

Send/Receive, this makes it possible to retrieve messages from the HSDPA and to send all

messages stored in the Outbox;

Forward, this makes it possible to forward the selected, current message to one or more

recipients. A click on this button edits the selected message in the SMS editor; You can modify the

message before forwarding it;

Reply, this is only active when a message in the Inbox is selected. A click on this button edits

the selected message; the recipient's number is displayed in the corresponding field. You can

modify the message before sending it.

ContactsContacts module main window is shown as:

30


this means that the contacts saved in SIM card;

this means that the contacts saved in WellPhone XT.

The contacts toolbar is composed of:

New contact, this makes it possible to open the contact editor and add a new contact to the

SIM card;

Note: the contact editor is reduced if the list displayed is the list of contacts from the SIM card. A

contact from the SIM card only contains a name and a telephone number;

Modify, this makes it possible to modify contact’s name and number;

Delete, this makes it possible to delete the current, selected contact;

Send SMS, this makes it possible to write and send an SMS to one or more recipients. The

number(s) of the selected contact(s) is/are automatically pre-displayed in the SMS editor in the

corresponding area;

Call this contact, this makes it possible to dial a call to this contact. Refer to chapter 4.2.4

Dialer

Update, this launches the synchronization of contacts. All contacts from HSDPA are read

then transferred to the WellPhone Explorer module. All new contacts created from the HSDPA will

31


be thus transferred.

CallsCalls module main window is shown as:

this means dialed calls from WellPhone XT;

this means received calls from WellPhone XT;

this means missed calls from WellPhone XT;

These calls list are sorted by time.

The contacts toolbar is composed of:

Call this contact, this makes it possible to dial a call to this contact. Refer to chapter 4.2.4

Dialer

Update, this update all calls dialed, received or missed from the WellPhone XT.

32


4.2.4 Dialer

Click on this button launches the Dial pad as following:

this makes it possible to make voice call to the inputted number (tool tips: Call a

number);

Note: you must insert earphone into HSDPA first, then you can make a call successfully.

this makes it possible to drop off the active call (tool tips: Hang up);

this makes it possible to enter contacts list, and make voice call to the selected contact (tool

tips: Phonebook);

this makes it possible to active the last call (tool tips: Renew the call);

this makes it possible to dial out the voice mail (tool tips: Voice mail);

this makes it possible to enter settings window (tool tips: Dialer configuration);

this makes it possible to enter call divert settings window (tool tips: Call divert);

this makes it possible to delete inputted numbers (tool tips: Erase);

33

During call


this makes it possible to mute the microphone (tool tips: Mute the microphone).

4.3 Settings

To change the parameters in settings, you have to click on the button, then select

Settings… , then enter Settings window.

4.3.1 General

The General parameters you can modify are the following:

Automatically run application when I log on to Windows

If the Automatically run application when I log on to Windows checkbox is not marked,

WellPhone XT will not be launched automatically when your computer is started up. You

must then start up WellPhone XT by selecting the shortcut WellPhone XT created in the

WellPhone XT group of programs, which you can access by clicking on Start Up/Programs.

This box is checked by default and authorizes WellPhone XT to launch itself automatically

when your computer is started up.

Select language

With this option, you can change the language of WellPhone XT. The language selected by

default is the language chosen when installed. The change of language only becomes

effective when the application is next launched.

Action to perform when device is connected

These radio buttons enable you to determine the behavior of WellPhone XT every time the

telecommunication device is detected:

o Do nothing: WellPhone XT does nothing automatically when HSDPA is detected and

allows you to make the choice;

o Place a phone call: enter dialer pad when HSDPA is detected;

o Explore the device (contacts, SMS, files, ...): launches the WellPhone Explorer

module when HSDPA is detected;

o Connect to the Internet: launches the default connection when HSDPA is detected;

34


o Switch to mass storage mode: switch HSDPA as mass storage mode when it is

detected;

o Always ask: asks WellPhone XT to display the list of actions that you want to carry

out when HSDPA is detected. This option is the default option.

4.3.2 Connections (Dial-up)

In the Connections (Dial-up) settings window, the list of connections defined in WellPhone XT is

then displayed. A connection can have one of the following characteristics:

Default connections

These are marked with a padlock in the Default column, which means that these

connections cannot be modified or deleted. When a connection of this type is selected, the

Delete button is grey and the Modify button is replaced by Copy and modify. This button

enables you to create a copy of the selected connection and to modify the parameters;

Imported connections: You can import a connection by clicking on the Import... option of

the File menu (see the "Importing a Connection" section);

Create new connections

To create a new connection, you must first click on the New button. The connection

parameters window is then opened. There are three different ways of creating a new

connection:

Use a predefined connection.

After having clicked on the Next > button, you can choose the most appropriate one from

those offered in the list, depending on the country and/or the phone operator;

Create a new connection.

After having clicked on the Next > button, you must then give a name for the connection

(which will be displayed at the level of the WellPhone XT) and the following parameters:

the access point name (APN);

the authentication parameters;

the DNS servers;

35


the http proxy address (the configuration of the proxy is only done for

Microsoft Internet Explorer);

the service quality parameters;

the start command, which is an additional command to be sent to HSDPA on each

connection if necessary.

Click on the Finish button in order to create the connection in WellPhone XT.

Copy and modify a predefined connection:

This option enables you to copy then modify a predefined connection. After having

clicked on Next >, you will be able to choose a country and an operator in order to be able

to select the connection. Then, click on Next > to confirm your choice. You will then

have the possibility of giving a name to your connection and modify the parameters.

Then, click on Finish to confirm your modifications.

Modifying a connection

You can modify a connection that has not been pre-installed by the system. Select the

connection you want and click on the Modify button. The connection parameters window is

then opened. You can modify the parameters of the chosen connection and click on OK to

confirm these modifications.

Deleting a connection

You can click on the Delete button to delete an existing connection not pre-defined by

WellPhone XT

Importing a Connection

It is possible to import a previously exported connection. This connection is in a file whose

format is internal to WellPhone XT (extension «.xml»). You have to find the location on your

hard disk of the file in «.xml» format that you want to import. To do this, you must first carry

out the following actions:

1. click on the Files button;

2. select Import...;

3. locate your file;

4. click on Open: the connection is shown in the list of connections;

5. click on the Default button if you want to define it as the default connection.

36


Exporting a Connection

You can export an existing connection into a file whose format is internal to WellPhone XT

(extension «.xml»). To do this, you must first carry out the following operations:

1. select the connection you want to export into a file;

2. click on the Files button;

3. select Export...;

4. indicate a destination path: A connection profile in the form of a file in «xml»

format will be created. You can then import this file into other computers in order to

automatically recreate the connection profile.


Configuring the Contacts Options

You can configure the following parameters:

selection of the messaging application, which will be displayed in the WellPhone

Explorer module in the form of a folder and with which you can synchronies your

contacts. You are given the following choices: None, Outlook Contacts, Windows

Address Book. Click on OK to confirm your choice.

selection of the contact synchronization mode, by selecting one of the following radio

buttons:

Automatic: the reading of contacts on your HSDPA will be carried out automatically

when you click on the button;

Ask User: When you click on the button, the application will ask you if it can

read the contacts on your HSDPA;

Manual: you can retrieve the contacts on your HSDPA by carrying out one of the

following actions: Click on the button, or Click on the option corresponding to

the icon of the Actions menu.

37


Click on OK to confirm your choice.

Configuring the Message Options

You can configure the following parameters:

check the Request a delivery report box if you want to receive an acknowledgement of

receipt for each SMS sent. By default, this box is not checked;

select the class of SMS that will be used for each SMS sent. By default, it is [4] No class:

[0] Screen: this means that the SMS sent will only be received on the screen of the

recipient's telecommunication device;

[1] Phone Memory: this means that the SMS sent will be stored in the memory of the


[2] SIM card: this means that the SMS sent will be stored in the SIM card of the


[3] Default: this means that the SMS sent will be stored in the memory designated by

default on the recipient's telecommunication device. This memory can be either the

SIM memory or that of the telecommunication device;

[4] No class: this means that the SMS sent will have no specified class.

Click on OK to confirm your choice.

selection of the contact synchronization mode, same as Contact settings.

Configuring the Call Options

Selection of the contact synchronization mode, same as Contact settings.

4.3.4 Live update

Automatically check for new updates: you can set the interval of each update as 1-100 hours.

After setting, automatic updates will be execute according to the timer you set.

4.3.5 Expert settings

Automatically retrieve device and device information: you can set the interval as 15 seconds-60

minutes. After settings, WellPhone XT will retrieve device and device information according to

the timer you set.

38


4.3.6 HSDPA settings

The parameters of HSDPA you can modify are the following:

Device settings

Name displayed: makes it possible to change the name of HSDPA shown in WellPhone

XT. Obviously, the internal name of the device is not changed;

Voicemail number: makes it possible to dial voice mail in Dialer window after you input

voicemail number in this option.

Calls

Calls: support incoming call. After settings, you can receive incoming call from HSDPA

by WellPhone XT.

Call history

All: save all call history dialed or received by WellPhone XT

Save calls of the last n days: you can set days from 1-99.

Divert calls

You can set call divert as: Always divert, Divert if busy, Divert if not answer, Divert if out of

reach.

Enable/disable PIN code

You can set SIM PIN code status as Disable or Enable, and when you change settings, you must

input correct PIN code first. If you set SIM PIN code as Enable, every time HSDPA is detected,

you will be asked for inputting SIM PIN code first.

Note: you have only three attempts to input PIN code, after three wrong attempts, your SIM will

be blocked. It can only be unblocked with the PUK code. You will be asked for this the next time

HSDPA is detected. If the PUK code is known, the PIN code will be reset to "0000".

Change SIM PIN code

To change SIM PIN code, the following steps shown as:

Previous SIM PIN code: old PIN code of the SIM card;

New SIM PIN code: new PIN code of the SIM card;

Confirm new SIM PIN code: confirmation of the new PIN code of the SIM card.

39


Note: you have only three attempts to change SIM PIN code, after three tries, your SIM card will

be blocked. It can only be unblocked with the PUK code. You will be asked for this the next time

HSDPA is detected. If the PUK code is known, the PIN code will be reset to "0000".

40


Chapter 5 Care and maintenance you card

You can ensure reliable operation and long life of your HSDPA wireless card by adhering to

these guidelines in storage and use:

1. Do not apply adhesive labels to the HSDPA wireless card or SIM. This may cause the HSDPA

wireless card or SIM to become jammed inside the slot, or prevent it from being inserted

properly.

2. When not connected with your computer, store the HSDPA wireless card and SIM in a safe

place.

3. Protect the card from liquids, dust, and excessive heat.

41


Chapter 6 Disconnect Flying-HOT from PC

Before disconnecting HSDPA from PC, you must stop it through the hardware removing function

of Windows. Do the following:

1. Click by right key on the lower right corner of the PC screen, and select to exit HSDPA client if it is open;

2. Double-click on the lower right corner of the PC screen and select Safely Remove

Hardware;

3. If a dialog box appears notifying you that it is safe to remove the card, click OK.

4. Pull out USB data line, disconnect HSDPA from PC.

42


Appendix Glossary

2G --second generation: Data transfer uses as much network capacity as any other call, and uses

that capacity for the duration of the connection, regardless of whether data is being transmitted at

any one moment. In contrast, the newer 3G standard is much faster for data, and only uses

network capacity when data is actively being transmitted.

3G --third generation: A new generation of wireless systems that provides high speed data

transmission (144 kbps and higher) and internet protocol (IP) based services in fixed, portable and

mobile environments.

Bps --bits per second: The actual data speed over the transmission medium. See also baud.

CDMA --Code Division Multiple Access: A wideband spread spectrum technique used in digital

cellular, personal communications services, and other wireless networks. Wide channels (1.25

MHz) are obtained through spread spectrum transmissions, thus allowing many active users to

share the same channel. Each user is assigned a unique digital code, which differentiates the

individual conversations on the same channel.

UMTS --Universal Mobile Telecommunications System: The mobile telephone system also

known as 3G for 3rd Generation. Data transfer rates of up to 2 Mbps allow video conferencing on

mobile telephones to be of similar quality to what is available for PC. Sending video from one

telephone to another should be as simple as sending an SMS.

COM: The serial communications port of a computer.

DNS --Domain Name Server: Internet server that supplies the mapping of domain names to IP

addresses.

Firmware: Software stored in ROM or EEPROM; essential programs that remain even when the

system is turned off. Firmware is easier to change than hardware but more permanent than

software stored on disk.

IP --Internet Protocol: The basic Internet transport mechanism. In CDPD it operates above the

MDLP layer. Also, an OSI layer 3 network layer protocol.

IP address: A unique address on the Internet. Each modem must have one, to operate on a packet

network. The IP address is a unique number consisting of four parts separated by dots. See also

DNS.

43


ISO --International Standards Organization: A standards setting group.

MHz --Mega-Hertz: One million cycles per second.

OEM -- Original Equipment Manufacturer: A company that manufactures a product and sells

it to a resellers

PCMCIA -- Personal Computer Memory Card International Association: The organization

that standardizes PC Cards

RF --Radio Frequency Roaming: A cellular subscriber is in an area where service is obtained

from a cellular service provider that is not the subscriber’s provider.

SMS --Short message services: A feature that allows users of a wireless device on a wireless

network to receive or transmit short electronic alphanumeric messages (up to 160 characters,

depending on the service provider).

WWW --World Wide Web: An Internet-based, hypertext, graphical network created by CERN

researchers in Switzerland. For more information about CERN, visit their site at www.w3.org.

44

Date post:	24-Nov-2014
Category:	Documents
Upload:	huydang592010
View:	50 times
Download:	0 times

User Manual EN

Documents