+ All Categories
Home > Documents > User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee...

User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee...

Date post: 15-Mar-2018
Category:
Upload: buidat
View: 214 times
Download: 1 times
Share this document with a friend
56
User Manual for Employee Management System (EMS)
Transcript
Page 1: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

User Manual for Employee Management

System (EMS)

Page 2: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Roles and Responsibility

Sr. # User Description Use 1 Administrator Department Employee at HO office. • Manages Qualification

• Manages Pay Scale • Manages Designation • Manages Employee Personal

Information (includes all departmental employee)

• Manages Employee Service Record • Manages Employee Qualification • Manages Employee Family Record • Manages Employee’s Fund

Nominee • Manages Employee Training Record • Allocates Gradation Number to HO

Employee (class I, ClassII, III, IV of HO) & class I& II of state

2 Zone Admin

User Department Employee at Zonal Level

Perform below activities in the records of all employee under particular Division or Zone office • Manage Employee Personal

Information • Manage Employee Service Record • Manage Employee Qualification • Manage Employee Family Record • Manage Employee’s Fund Nominee • Manage Employee Training Record • Allocates Gradation Number to

Class III & IV Employee of zone 3 District Admin

User Department Employee at District office

Perform below activities in the records of all employee under particular District • Manage Employee Personal

Information • Manage Employee Service Record • Manage Employee Qualification • Manage Employee Family Record • Manage Employee’s Fund Nominee • Manage Employee Training Record

4 Any User A user (may be of any Role) A user who can view all Establishment Reports.

Page 3: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Process Flow of PMIS Module

Start

User Login Process

If login Success

Login Failed

Successfully login

AdminUser

Zone AdminUser

District Admin User

Page 4: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Process Flow of PMIS Module (Admin User)

A

User can Add, Modify Agri Office of Specific Office type

B

User can Add ,Modify Section of Specific Office Type

Return Main Menu

Agri Office Section

PMIS Master

C

User can Add/ Modify Designation

D

User can Add, Modify Pay - scale

E

User can Add, Modify Qualification

Pay scale Designation Qualification

Page 5: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Process Flow of PMIS Module (Admin User)

A

Admin User can allot Gradation Number to all Employee of1) all Class (i.e I ,II, III & VI) of HO Office2) Class I & Class II of overall state

B

Admin User can enter New employee with 1) Personal data2) Service Record (appoint ment time)2.1 Order Related Information2.2 Place Related Information2.3 Post Related Information2.4 Other information

Return Main Menu

PMIS Transaction

Employee Gradation

Employee Entry

C

Employee Service Record

Admin User can Add, Modify Service Record of any Employee

By Entering Employee ID Number

Here User can enter below Order Typea) Transterb) Promotionc) Transfer/Promotind) Othere) TimeBarf) Suspendedg) LWP

Page 6: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Process Flow of PMIS Module (HO Admin User)

Return Main Menu

PMIS Transaction

Employee Family Detail

D E

Admin User can Add, Modify Training Detail of any Employee

By Entering the Employee ID Number

Employee Training Detail

Employee Qualification Detail

F G

Admin User can Add, Modify Service Record of any Employee

Here User can select employee by its District and Office

After searching employee User can work on Employees A) Personal DetailB) service RecordC) Family DetailD) Training DetailE) Qualification Detail

Employee Search

Admin User can Add, Modify Qualification Detail of any Employee

By Entering the Employee ID Number

Admin User can Add, Modify Family Detail of any Employee

By Entering the Employee ID Number

Page 7: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Process Flow of PMIS Module (Zone Admin Users)

Select Data entry Screen for various tasks (only for the Employees comes under

Particular Zonal Office of Zone)

Zone Admin User

PMIS Transaction

B

Employee Entry

C

Employee Service Record

D

Employee Family Detail

E

Employee Training Detail

F

Employee Qualification

Detail

G

Search Employee

A

Employee Gradation

Page 8: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Process Flow of PMIS Module (District Admin Users)

Select Data entry Screen for various tasks (only for the Employees comes under

particular District)

District Admin User

PMIS Transaction

B

Employee Entry

C

Employee Service Record

D

Employee Family Detail

E

Employee Training Detail

F

Employee Qualification

Detail

G

Search Employee

Page 9: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Process Flow of PMIS Module for Reports (Admin/Zone Admin/District Admin Users)

Select PMIS Report Menu

Admin User

Zone User & District user can view and take printout of various reports based on parameters.

Return Main Menu

District Admin User

Admin user can view and take printout of various reports based on parameters.

Zone Admin User

Page 10: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

List Question 1 What is the Purpose of this module? Question 2 How to open the application? Question 3 How to add Agriculture Office? Question 4 How to add Sections in the Office? Question 5 How to add Designation in the Office? Question 6 How to add Pay scale in the Office Question 7 How to add Qualification in the Office? Question 8 How to Create New User? Question 9 How to Add New Employee? Question 10 How to Add/Modify Service Record of Employee? Question 11 How to Add/Modify Employee’s Family Member Detail? Question 12 How to Add/Modify Employee’s Training Detail? Question 13 How to Add/Modify Employee’s Qualification Detail? Question 14 How to Modify Employee’s Detail? Question 15 How to allot Gradation number to Employee?

Page 11: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Question 1 What is the Purpose of this module? Main goal of this module is to Develop Employee database with necessary information.

The main activities of these modules are -

Manages Unique Employee ID, which is automatically generated by computer. Manages Employees Personal Details (one time Information i.e. static information- Name, Family

detail, Fund Nominee, Qualification, Training etc). Manages Employees Service Record (Starting from his/her appointment time till existence in the

department). In Service record various type of order details are maintained (Like Transfer, Promotion, Transfer/Promotion, and Suspension & LWP).

Manages Employee working status (i.e Expired, Retired, and VRS & Working). Manages Employee Post Natures (i.e. Anukampa, Probation, Deputation, and Permanent &

Temporary). Manages Employees Fund Category – (like GPF, Pension, FBF, Other, Full Payment, Not Applicable)

with particular category nominee (i.e. only family member) and preference (i.e. First, Second etc). Manages Employee Qualification record. Manages Employee Training record (which s/he attended officially). Manages Employee Family record. Manages Office under particular District. Manages Sections under particular Office. Manages Pay Scales & its affective date. Manages Designations and sanctioned number of post. Manages Qualifications detail category wise. Manages Gradation number and Year (of gradation) of employee.

Allotment can be done from Zone (Division) & HO Level. From Zone Level - Gradation Number allotted to the Employees of entire District comes under particular zone (only Class III & Class IV). From HO Level – Gradation Number allotted to Employees of HO Level (all Class of HO and Class I & Class II of state).

Manages Increment date of employee. Manages Overall Official Posting detail of employee (from Joining Posting to Current Posting). Manages Pay scale, Post and Cadre detail of employee. Manages Employee Qualifying Qualification. Generates various Decision making Reports

Page 12: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Question 2 How to open the application? Step 1: #: When the user open the website (www.mpkrishi.org) , the home page appears as shown is figure-1. To Enter in the dynamic portion of the website the user can click on the logo which is shown in upper right corner.

Figure 1

Click Here for Login Page

Page 13: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 2 After clicking on the logo (as instructed in step 1) , the user get the login screen as shown below. In the login screen, the user can type Userid and Password allotted to him/her by the department and click on “login” button for entering into the application. For example: The userid and password – “adminagrisnet” is allotted for administrator user as shown in figure 2. If the user enter wrong username and password then user get message “Invalid Login name” as shown in figure 3

Figure 2

Figure 3

User Name

Password

Click Here For Login

Page 14: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 3 After clicking on the login button user get the menu according to the his/her rights, as shown in figure 4

Figure 4

Question 3 How to add Agriculture Office?

Step 1 Click on the “Master Data Entry “ then click on “Office Master” from its “EMS” option as shown in figure 5

Figure 5

Click Here

Page 15: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 2 After clicking on the “Office Master” as shown in figure 5, the user get the office master screen as shown in figure 6 below. The office names are displayed on the left side and the detail of selected office on the right side.

Figure 6

Step 3 (a) For Modification:

Page 16: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

User can also modify the office detail , for this user has to first select the office name from the list shown in the left side and hence the detail of the office will appears on the right side. Now click on the “Modify button” as shown in figure 7 below.

Figure 7

Step 3 (b) After clicking on the modify button (as in figure 7), the user get the screen shown in figure 8 , here the user can perform modifications on the office detail and for saving the detail may click on “save” button

Page 17: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Figure 8

Step 4 To add new office , user can click on the “Add New Office” (displayed on top left side of figure 9) , the user will get enabled boxes for entering the office detail. After entering the office detail the user can save the detail by clicking on the “save” button , if user want to cancel the work then click on “cancel” button

Page 18: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Figure 9

Page 19: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Question 4 How to add Sections in the Office? Step 1 Click on the “Master Data Entry “ then click on “Section” from its “EMS” option as shown in figure 10

Figure 10

Step 2 After clicking on the “Section Master” as shown in figure 10, the user get the Section master screen as shown in figure 11 below. The sections names are displayed on the left side and the detail of selected Section on the right side.

Figure 11

Click Here

Page 20: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 3 (a) For Modification: User can also modify the Section detail, for this user has to first select the Section name from the list shown in the left side and hence the detail of the Section will appears on the right side. Now click on the “Modify button” as shown in figure 12 below.

Figure 12

Step 3 (b) After clicking on the modify button (as in figure 12), the user get the screen shown in figure 13, here the user can perform modifications on the Section detail and for saving the detail user may click on “save” button

Figure 13

Page 21: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 4 To add new Section, user can click on the “Add New Section” (displayed on top left side of figure 14), the user will get enabled boxes for entering the Section detail. After entering the Section detail the user can save the detail by clicking on the “save” button, if user want to cancel the work then click on “cancel” button Note: there are two section type mentioned “Common” “Office Specific” “Common”—for common section type no office level is required “Office Specific”—for office specific the user has to select the office level for the section

Figure 14

Page 22: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Question 5 How to add Pay scale in the Office. Step 1 Click on the “Master Data Entry “ then click on “Pay scale ” from its “EMS” option as shown in figure 15

Figure 15

Step 2 After clicking on the “Payscale Master” as shown in figure 15, the user get the Payscale master screen as shown in figure 16 below. The Payscale names are displayed on the left side and the detail of selected Payscale on the right side.

Figure 16

Click Here

Page 23: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 3 (a) For Modification: User can also modify the Payscale detail, for this user has to first select the payscale from the list shown in the left side and hence the detail of the payscale will appears on the right side. Now click on the “Modify button” as shown in figure 17 below.

Figure 17

Step 3 (b) After clicking on the modify button (as in figure 17), the user get the screen shown in figure 18, here the user can perform modifications on the Payscale detail and for saving the detail user may click on “save” button

Figure 18

Page 24: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 4 To add new Payscale , user can click on the “Add New Pay Scale Detail” (displayed on top left side of figure 14), the user will get enabled boxes for entering the Section detail. After entering the Payscale detail the user can save the detail by clicking on the “save” button, if user want to cancel the work then click on “cancel” button

Figure 19

Page 25: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Question 6 How to add Designation in the Office? Step 1 Click on the “Master Data Entry “ then click on “Designation” from its “EMS” option as shown in figure 20

Figure 20

Click Here

Page 26: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 2 After clicking on the “Designation Master” as shown in figure 20, the user get the Designation master screen as shown in figure 21 below. The Designation names are displayed on the left side and the detail of selected Designation on the right side.

Figure 21

Page 27: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 3 (a) For Modification: User can also modify the Designation detail, for this user has to first select the Designation from the list shown in the left side and hence the detail of the Designation will appears on the right side. Now click on the “Modify button” as shown in figure 22 below.

Figure 22

Page 28: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 3 (b) After clicking on the modify button (as in figure 22), the user get the screen shown in figure 23, here the user can perform modifications on the Designation detail and for saving the detail user may click on “save” button

Figure 23

Page 29: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 4 To add new Designation, user can click on the “Add New Designation” (displayed on top left side of figure 24), the user will get enabled boxes for entering the Designation detail. After entering the Designation detail the user can save the detail by clicking on the “save” button, if user want to cancel the work then click on “cancel” button

Figure 24

Page 30: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Question 7 How to add Qualification in the Office? Step 1 Click on the “Master Data Entry “ then click on “Qualification” from its “EMS” option as shown in figure 25

Figure 25

Click Here

Page 31: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 2 After clicking on the “Qualification Master” as shown in figure 25, the user get the Qualification master screen as shown in figure 26 below. The Qualification names are displayed on the left side and the detail of selected Qualification on the right side.

Figure 26

Page 32: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 3 (a) For Modification: User can also modify the Qualification detail, for this user has to first select the Qualification from the list shown in the left side and hence the detail of the Qualification will appears on the right side. Now click on the “Modify button” as shown in figure 27 below.

Figure 27

Page 33: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 3 (b) After clicking on the modify button (as in figure 27), the user get the screen shown in figure 28, here the user can perform modifications on the Qualification detail and for saving the detail user may click on “save” button

Figure 28

Step 4 To add new Qualification, user can click on the “Add New Qualification” (displayed on top left side of figure 29), the user will get enabled boxes for entering the Qualification detail. After entering the Qualification detail the user can save the detail by clicking on the “save” button, if user want to cancel the work then click on “cancel” button

Figure 29

Page 34: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Question 8 How to Create New User? Step 1 Click on the “Master Data Entry “ then click on “User Creation” from its “EMS” option as shown in figure 30

Figure 30

Step 2 After clicking on the “User Creation” as shown in figure 30, the user get the User Creation screen as shown in figure 31 below. For searching the employee the user will have to select “District ”, “Agriculture Office”, “Section”.

Figure 31

Click Here

Page 35: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 3 If the employee exist according to the selection criteria shown in step 2 (figure 31) than below screen appears as shown in figure 32. If the Login ID, Password & Role is already allotted to employee then it will shown as below in the table and if not allotted then we get “--” (dash) in the table

Figure 32

Step 4 For performing addition /modification action in LoginID, Password & Role of selected employee’s record, user can mark check on the “Add/Modify User Login” as shown in below figure 33

Figure 33

Page 36: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 5 When user check on “Add/Modify User Login” as shown in figure 33, the user will get below screen shown in figure 34 containing login details of employee like-

• User login - Refer to the login ID allotted to the employee for entry in the application. • Password – Refer to the password allotted to the employee for entry in the application. • Role – Refer to the authority allotted to the employee (i.e. Administrator, District employee, Guest

etc) • Subject – Refer to the Subject related to the employee (if employee is not SMS (Subject Matter

Specialist) of any subject then it is not a mandatory to select “Subject” and employee can be SMS of more than one subject)

• Group – Refer to the group to which employee belongs for group email. • Location – Refer to the Place of employee.

Clicking on the Modify button to get the field enabled Clicking on the Delete button to delete the allotted “LoginID”, “Password” & “Role” Clicking on the Cancel button to cancel the changes

Figure 34

Page 37: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 6 After clicking on the Modify button as shown in figure 34, all fields appears to be enabled as shown in figure 35 below. For saving the changes click on the Save button other wise click cancel to undo changes.

Figure 35

Step 7 After clicking on the Save button as shown in figure 35, the Message “User Modified Successfully” appears as shown in figure 36, this indicated that LoginID , Password , Role, Subject & Email Group is allotted to the employee successfully.

Figure 36

Page 38: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Question 9 How to Add New Employee?

Step 1 Click on the “Transaction“ then click on “EMS-Index” from its “EMS” option as shown in figure 37

Figure 37

Step 2 After clicking on the “EMS - Index” as shown in figure 37, the Index screen appears as shown in figure 38. For Adding record of new employee click on “Add New Employee” option.

Figure 38

Click Here

Click Here

Page 39: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 3 After clicking on “Add New Employee” option as shown in figure 38, then below Employee Details Entry form appears as shown in figure 39

Figure 39

Page 40: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Filling all the entries given in the above format, specially those entries which are marked by “Red Star”

After filling and clicking on “Save” Button, the message appears as shown in figure 40

Figure 40

Page 41: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Question 10 How to Add/Modify Service Record of Employee? Step 1 After clicking on the “EMS - Index” as shown in figure 37, the Index screen appears as shown in figure 38. For Addition/Modification of employee service record click on “Add/Modify Employee’s Service Record” option. as shown in figure 41

Figure 41

Figure 41(a)

Click Here

Click Here

Page 42: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 2 After clicking on the “Add/Modify Employee’s Service Record” option. As shown in figure 41, the Employee Search Screen appears as shown in figure 41(a). Now clicking on the “Show Details” button as shown in figure 41(a) ,the Service Record screen appears as shown in figure 42.

• The user always get one Service Record added (which is added automatically when we enter whole detail of employee in “Employee Entry form” first time)

• For addition of new Service record click on “Add New Service Record” • The user can choose “Type of Order” (i.e. Transfer, Promotion, Trasfer/Promotion etc) & fill all

other details • For modification in Existing Service Record click “Modify” Button. • For saving the changes user can click on “Save” Button. • To undo the changes user can click on “Cancel” Button.

Figure 42

Page 43: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Question 11 How to Add/Modify Employee’s Family Member Detail? Step 1 After clicking on the “EMS - Index” as shown in figure 37, the Index screen appears as shown in figure 38. For Addition/Modification of Employee’s Family Member Detail click on “Add/Modify Employee’s Family Member Detail” option. as shown in figure 43

Figure 43

Click Here

Page 44: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 2 After clicking on the “Add/Modify Employee’s Family Member Detail” option. As shown in figure 43, the Employee Search Screen appears as shown in figure 41(a). Now clicking on the “Show Details” button as shown in figure 41(a), the Employee’s Family Member Screen appears as shown in figure 44.

• For addition of new family member’s detail click on “Add New Employee Family Detail” • The user can choose “Nomination” (i.e. GPF, Pension etc) for nominating the family member. • The user can choose “Preference” (i.e. First, Second) for setting the preference of nominating the

family member. No two member can have same “nomination category “ and same “preference”. • For modification in Existing Service Record click “Modify” Button. • For saving the changes user can click on “Save” Button. • To undo the changes user can click on “Cancel” Button.

Figure 44

Page 45: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Question 12 How to Add/Modify Employee’s Training Detail? Step 1 After clicking on the “EMS - Index” as shown in figure 37, the Index screen appears as shown in figure 38. For Addition/Modification of Employee’s Training Detail click on “Add/Modify Employee’s Training Detail” option. as shown in figure 45

Figure 45

Click Here

Page 46: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 2 After clicking on the “Add/Modify Employee’s Training Detail” option as shown in figure 45, the Employee Search Screen appears as shown in figure 41(a). Now clicking on the “Show Details” button as shown in figure 41(a), the Employee’s Training Screen appears as shown in figure 46.

• For addition of new training detail click on “Add New Training Detail” • Fill all the details like “Training Detail”, “Place”, “From Date” & “To Date” • For modification in Existing Service Record click “Modify” Button. • For saving the changes user can click on “Save” Button. • To undo the changes user can click on “Cancel” Button.

Figure 46

Page 47: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Question 13 How to Add/Modify Employee’s Qualification Detail? Step 1 After clicking on the “EMS - Index” as shown in figure 37, the Index screen appears as shown in figure 38. For Addition/Modification of Employee’s Training Detail click on “Add/Modify Employee’s Qualification” option. As shown in figure 47

Figure 47

Click Here

Page 48: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 2 After clicking on the “Add/Modify Employee’s Qualification” option. As shown in figure 47, the Employee Search Screen appears as shown in figure 41(a). Now clicking on the “Show Details” button as shown in figure 41(a) ,the Employee’s Qualification Entry screen appears as shown in figure 48.

• For addition of new training detail click on “Add New Employee Qualification” • Fill all the details like “Qualification Category”, “Examination”, “Pass Year” & “Qualifying

Exam” • For modification in Existing Service Record click “Modify” Button. • For saving the changes user can click on “Save” Button. • To undo the changes user can click on “Cancel” Button.

Figure 48

Page 49: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Question 14 How to Modify Employee’s various Details (like Personal Information, Service Record, Training, Qualification, Family Member etc information)? Step 1 After clicking on the “EMS - Index” as shown in figure 37, the Index screen appears as shown in figure 38. For Modification in Employee’s various details click on “View/Modify selected Employee Record” option. As shown in figure 49.

Figure 49

Click Here

Page 50: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 2 After clicking on the “View/Modify selected Employee Record” option as shown in figure 49 we get below Employee Overall Management screen as shown in figure 50.

• By Selecting proper “District “ and “Office Name” the employee list is displayed.

Figure 50

Click Here

Page 51: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 3 By Selecting “Edit” option as shown in figure 50, the below screen appears as shown in figure 51.

• To view/edit employee’s Qualification related information then click on “Add Qualification

Record” as shown in figure 52 • To view/edit employee’s Service Record related information then click on “Add Service Record”

in figure 53 • To view/edit employee’s Training related information then click on “Add Training Record” in

figure 54 • To view/edit employee’s Family member related information then click on “Add Family Record”

in figure 55

Figure 51

Click Here to return Employee

Page 52: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Figure 52

Figure 53

Page 53: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Figure 54

Figure 55

Page 54: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Question 15 How to Allot Gradation Number to the employee? Step 1 Click on the “Transaction“ then click on “Employee Gradation” from its “EMS” option as shown in figure 56

Figure 56

Page 55: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Step 2 After clicking on “Employee Gradation” as shown in figure 56, we get the Employee Gradation screen as shown in figure 57

• Select Year • Select Designation • You will get Office level =”Directorate” when login through “Administrator” as shown in figure

57 • You will get office level = “Divisional” When login through “Zone Admin” as shown in figure 58 • Click on “Search “ Button • After clicking on search button user get the employee list with “Gradation Number” option

enabled where proper gradation number can be allotted to employee.

Figure 57

Figure 58

Page 56: User Manual for Employee Management System (EMS)mpkrishi.mp.gov.in/hindisite/Pmis.pdf · Employee Management System (EMS) Roles and Responsibility Sr. # User Description Use 1 Administrator

Recommended