Dear Customer, Congratulations on becoming the proud owner of a “Bajaj Pulsar 220 DTS-i” motorcycle, one of the finest motorcycles in the country. Your safety and the safety of others is extremely important. Hence, before you ride the bike, please read this Owner's Manual carefully and familiarize yourself with the operating mechanism, controls and maintenance requirements. This will ensure you a long and trouble free ownership experience. To keep your bike in perfect running condition and deliver consistent performance, we have specially programmed the periodic maintenance services which includes 3 Free and 4 Paid services. We earnestly advise you to avail all these services at any of our Vehicle Dealers or Authorised Service Centres as per the schedule contained in this booklet Your “Bajaj Pulsar 220 DTS-i” comes with a warranty of 2 Years or 30,000 Kms. whichever occurs earlier from the date of sale. For details please refer to “Warranty : Scope & Limits” given in this manual. We urge you to entrust all your service needs to a Bajaj Dealer or Authorised Service Centres only. They are well equipped with all necessary facilities / genuine parts / oil and trained manpower will ensure the best care for your bike. Should you require any additional information or wish to convey any grievance you may contact us on our toll free no. / e-mail mentioned on front cover inner page of this manual. SERVICE DEPARTMENT BAJAJ AUTO LIMITED Thank you for choosing a Bajaj and wish you unlimited miles of happy riding!!
Transcript
Dear Customer,
Congratulations on becoming the proud owner of a “Bajaj Pulsar 220 DTS-i” motorcycle, one of the finest motorcycles in the country.
Your safety and the safety of others is extremely important. Hence, before you ride the bike, please read this Owner's Manual carefully and familiarize yourself with the operating mechanism, controls and maintenance requirements. This will ensure you a long and trouble free ownership experience.
To keep your bike in perfect running condition and deliver consistent performance, we have specially programmed the periodic maintenance services which includes 3 Free and 4 Paid services. We earnestly advise you to avail all these services at any of our Vehicle Dealers or Authorised Service Centres as per the schedule contained in this booklet
Your “Bajaj Pulsar 220 DTS-i” comes with a warranty of 2 Years or 30,000 Kms. whichever occurs earlier from the date of sale. For details please refer to “Warranty : Scope & Limits” given in this manual.
We urge you to entrust all your service needs to a Bajaj Dealer or Authorised Service Centres only. They are well equipped with all necessary facilities / genuine parts / oil and trained manpower will ensure the best care for your bike.
Should you require any additional information or wish to convey any grievance you may contact us on our toll free no. / e-mail mentioned on front cover inner page of this manual.
SERVICE DEPARTMENT BAJAJ AUTO LIMITED
Thank you for choosing a Bajaj and wish you unlimited miles of happy riding!!
Location of Parts...........................................................................................................................................................................3
How to Ride your Bike................................................................................................................................................................17
General Maintenance Information...............................................................................................................................................21
Schedule for Periodic Part Replacement...................................................................................................................................30
Service Records...........................................................................................................................................................................37
Service Coupons
Battery Warranty Card
DOC. NO.: 71110881 REV. 01, JAN. 10
Warning
This indicates that a potential hazard or injury to you or other persons and to the vehicle can happen, if the advise provided is not followed.
Safety and Warning Information
Caution
This indicates that a potential hazard that could result in vehicle damage. Follow the advise provided with the caution.
The description and illustration in this booklet are not to be taken as binding on the manufacturers.
The essential features of the type described and illustrated herein remaining unaltered.
Bajaj Auto Limited reserves the right to carry out at any moment without being obliged to bring this
booklet upto-date.
Modifications on the vehicle, parts or accessories as may be convenient and necessary.
Notice
Identification Data
The Frame and Engine serial numbers are used to register the motorcycle. These are the unique alpha-numeric codes to identify your vehicle from others of the same model and type.
Engine Number Location :On LH side crankcase near
gear change lever.
Frame Number Location:On the RH side ofsteering tube forPulsar 220 F.
On the LH side ofsteering tube forPulsar 220 S.
1
Engine : 4 Stroke, Single Cyl., Natural air cooled/ Oil cooled
Note : All dimensions are under UNLADEN condition. Above
information is subject to change without any notice.
Technical Specifications
2
3
Location of Parts
1. Side stand indicator : When Side stand is ‘ON’, the Side stand indicator will be lit.
2. Turn signal indicator (LH & RH) : When Turn signal switch is turned to Left or Right, Turn pilot indicator - LH or RH will flash.
3. Trip meter reset knob : Trip meter can be reset to zero by turning the Trip meter reset knob anticlockwise.
4. Trip meter : The Trip meter shows the distance traveled since it was last reset to zero.
5. Speedometer : The vehicle speed is displayed digitally.
6. Odometer : The Odometer shows the total distance that the vehicle has accumulated.
2
7
9
6
8
5
1
10
11
3
4
4
Location of Parts
7. Fuel level indicator : Fuel level indicator shows available fuel in fuel tank.
8. Tachometer : It shows the engine speed in RPM.
9. Neutral indicator : When the transmission is in Neutral & Ignition switch ‘ON’, the Neutral indicator is lit.
10. Hi beam indicator : When Headlight is ‘ON’ & Hi beam is selected with engine running, Hi beam indicator will be lit.
11. Steering cum Ignition Switch : Key operated switch for Ignition ‘ON’/‘OFF’ & locking handle bar.
2
7
9
6
8
5
1
10
11
3
4
Location of Parts
Air Filter Element Choked
High Engine Temperature
Battery Voltage Low
Low Fuel Oil Level
+
1 2 3 4
1
2
3
4
4 ICONS ON SPEEDO DISPLAY AT THE TOP
These icons flash whenever their limits are exceeded
Take you vehicle to service station for maintenance of required item, if any of the above icon flickers continuously.
5
6
Location of Parts (for 220 F)
Left Side View
Front Fork
Clutch Lever
Fuel TankRear
Shock AbsorberGrab
Handle
PillionFoot Rest
Gear ChangeLever
SideStand
7
Location of Parts (for 220 F)
Front BrakeLever
Rear BrakePedalCenter Stand
Silencer
Accelerator GripRight Side View
8
Location of Parts (for 220 S)
Front Fork
Clutch Lever
Fuel TankRear
Shock AbsorberGrab
Handle
PillionFoot Rest
SideStand
Gear ChangeLever
Left Side View
9
Location of Parts (for 220 S)
Front BrakeLever
Rear BrakePedalCenter Stand
Silencer
Accelerator GripRight Side View
10
Location of Parts
Steering Cum Ignition Lock :It has three positions.
To Lock the Steering :
To lock the steering, turn the handle bar to the left or right. Push down & turn the key to “LOCK” position and remove the key.
To Unlock the Steering :
To unlock the steering, insert the key in steering cum ignition lock & turn it clockwise to “OFF” or “ON” position.
Other Keys :
A common key is used for ‘Steering cum Ignition lock’, ‘Fuel tank cap’ and ‘Side cover lock’.
LLE
R-H
SU
P
Key Position Key Removal
LOCK
Key can beRemoved
Function
Steering LockedIgnition OFF
Steering UnlockIgnition OFFOFF
Steering UnlockIgnition ONON
Key can notbe Removed
11
Location of Parts
Fuel Tank Cap
• To open the fuel tank cap, lift the flap (A), insert the key in the lock and turn it clockwise.
• To lock ‘Fuel Tank Cap’ gently press the cap.
Fuel TankCap
A
Fuel Tap
Fuel tap lever has following positions.
ON : When fuel level is above Reserve position.
RES : When fuel level is below Reserve position.
OFF : When fuel supply is to be cut off.
FUELTAP
OF
F
ON
RES
Location of Parts
Left Handle Bar Switches
A. Dipper Switch :
When headlight is ON, High or Low beam can be selected with the dipper switch. Hi beam indicator light located on Speedo console will light up when high beam is selected.
: High Beam : Low beam
B. Turn Signal Switch :
When the turn signal knob is turned to Left ( ) or Right ( ). the corresponding blinkers will be lit.
A
B
C
Cancellation of Turn Signals will occur in 3 ways, 2 automatically and 1 manually.
1. After having turned to the Left or Right directions, the turn signal will switch itself off when the handle bar is straightened.
2. If one forgets to take a turn, but has selected the turn signal it will be switched off automatically after approx. 1 min.
3. If the turn signal has selected to left & the rider was to cancel it, turning the switch right will cancel it. Pushing it in the center will not cancel it.
C. Horn Button :
( ) Press button for sounding horn.
12
13
Location of Parts
E
D
F
: All lamps 'OFF'.
: Tail lamp, Meter lamp and Pilot lamp/s ‘ON’.
: Head lamp, Pilot lamp/s, Tail lamp & Meter lamps ‘ON’.
Right Handle Bar Switches
D. Head Light Switch : It has 3 positions.
E. Engine Kill Switch : The engine kill switch is for regular use too. During emergency move the engine kill switch to the off ( ) position.
F. Starter Button : Starter button operates the electric starter when clutch lever is depressed w i th t ransmiss ion in any gea r . I t i s recommended to start the engine with the transmission in neutral.
CAUTION :While starting ensure that engine kill switch is in ON ( ) position. Engine will not start if the kill switch in OFF position.
14
Location of Parts
A
B
Removal of Side Cover LH or RH
• Insert key into the cover lock & turn clockwise. and pull the ‘Side Cover’ out from the bottom.
• Pull front side (side towards Engine) of ‘Side Cover’ to release Lug provided on ‘Side Cover’ from hole (A) provided on ‘Fuel Tank’.
• Slide the ‘Side Cover’ forward (towards the engine) to release slot provided on rear side of ‘Side Cover’ from bracket with rubber cap (B) provided on ‘Chassis’.
• Take out ‘Side Cover’.
CAUTION : Remove cover as described above, otherwise the lugs may break.
Fitment of Side Cover LH or RH
• Match slot provided on rear side of ‘Side Cover’ with bracket (B) provided on ‘Chassis’ and slide ‘Side Cover’ backward (towards Tail lamp).
• Match Lug provided on front side of ‘Side Cover’ with hole (A) provided on ‘Fuel Tank’ and press ‘Side Cover’ inside.
• Match the lock plate of ‘Side Cover’ properly with bracket on ‘Chassis’ and Lock.
CAUTION : Fit cover as described above to ensure proper fitment.
Tool Kit Location
• It is located below seat. For removing seat please refer procedure given on page number 16.
• 2 rubber straps are provided to hold the tool kit.
Tool Kit
Location of Parts
Battery
• It is located inside the ‘Side Cover’ LH. For removing ‘Side Cover’ LH, please refer procedure given on page number 14.
• Always check that the electrolyte level in each cell is between upper and lower level lines.
• Always keep a watch on battery charge level indicating icon. If it flashes, show the vehicle to Pro-biking Dealer.
Battery
15
16
Location of Parts
Removal of Seat - Front & Rear• Remove ‘Side Cover’ LH.
• To remove Seat Front, pull the ‘Seat Release Cable’ (A) to release seat lock. Keeping cable pulled, tap the center of seat, lift the seat from rear end and slide it back to remove seat.
• To remove Seat Rear, pull the ‘Seat Release Cable’ (B) to release seat lock. Keeping cable pulled, tap the center of seat, lift the seat from rear end and slide it towards tail lamp to remove seat.
CAUTION : Always remove Rear Seat first.
Fitment of Seat - Front & Rear• For fitment of Seat Front, match & insert the bracket
(‘1’ of Fig. ‘B’) of seat with slot (‘2’ of Fig. ‘B’) provided below fuel tank rear mounting on chassis. Push seat towards fuel tank and align lock rod (‘3’ of Fig. ‘B’) & seat lock (‘4’ of Fig. ‘B’). Then press the seat in middle from top to lock the seat.
• For fitment of Seat Rear, match & insert the bracket (‘5’ of Fig. ‘C’) of seat with slot (‘6’ of Fig. ‘C’) provided below fuel tank rear mounting on chassis. Push seat towards fuel tank and align lock rod (‘7’ of Fig. ‘C’) & seat lock (‘8’ of Fig. ‘C’). Then press the seat in middle from top to lock the seat.
CAUTION : Always fit Front Seat first.
Seat Release Cable Fig. B Fig. C
1
2
3
4
5 7
86A
B
17
How to Ride Your Bike
Proper running-in is important for the better life and trouble free performance of the vehicle.
• During first 2000 kms running-in period do not exceed following speed limits.
Kms 1st 2nd 3rd 4th 5th
0 - 1000 15 30 45 55 65
1000 - 2000 20 40 55 65 75
• Always keep the speed below the limits mentioned in the table.
• Do not race the engine excessively.• Do not start moving or race the engine immediately
after starting. Run the engine for a minute at idle speed to give the oil a chance to workup into the engine.
Running IN
Starting the Engine :
• Keep the fuel tap to ON or RES position.
• Turn ignition switch to ON position.
• Turn Kill switch to ( ) ON position.
• Confirm that the vehicle (transmission) is in neutral.
• Keep the throttle completely closed, push the starter button ( )
CAUTION : Do not operate the starter continuously for more than 5 sec. Wait for 15 sec. before you re-start.
NOTE : The motorcycle is equipped with a starter lockout switch. The vehicle can start in any gear when clutch lever is depressed.
It is recommended to start the engine with the transmission in neutral.
In case of starting trouble by self start the vehicle can be push started.
Moving Off :• Check that Center/Side stand is up.• Depress the clutch lever.
st • Shift into 1 gear.• Open the throttle and release the clutch lever slowly
and simultaneously.• As the clutch starts to engage, open the throttle a
little more, giving the engine just enough rpm to keep it from stalling.
18
How to Ride Your Bike
Shifting Gears :• Close throttle & depress the clutch.
• Shift into next higher or lower gear.
• Open the throttle and release the clutch lever slowly and simultaneously.
WARNING : When shifting down to lower gear, do not shift at such a high speed that the engine rpm rises excessively and which may cause the rear wheel to skid.
Braking :• Close the throttle completely, leaving the clutch
engaged (except where shifting gears) so that the engine braking will help slow down the motorcycle.
• Shift down one gear at a time so that you are in Neutral when you come to a complete stop.
• When stopping, always apply both brakes at the same time. De-clutch as necessary to keep the engine from stalling.
• Never lock the brakes, or it will cause the tyres to skid. When cornering, use brakes judiciously and do not de-clutch. Reduce your speed before you get into the corner. For emergency braking, disregard downshifting, and concentrate on applying the brakes as hard as possible without skidding.
Stopping the Vehicle :• Close the throttle completely.
• Shift the transmission into neutral.
• Bring the vehicle to complete stop.
• Turn the ignition switch off.
Parking :• Shift the transmission into neutral and turn the
ignition switch OFF.
• Support the motorcycle on a firm level surface with the center or side stand.
CAUTION : Do not park on a soft or steeply inclined surface or the motorcycle may fall over.
Gear Shifting Sequence Gear Shifting Lever
How to Ride Your Bike
19
• Drive smoothly and steadily at speed between 40 and 50 km/h .
• Drive at constant speed; avoid sudden accelerations & harsh braking as far as possible. Plan your trips properly with minimum start-stops.
• Change the gear judiciously according to the speed requirements. Drive as far possible in highest gear.
• Travel as light as possible; do not overload the vehicle above the specified payload.
• Stop the engine quickly at the end of the journey. Avoid excessive idling. For intermediate stoppages, cut-off the engine if you want to stop for more than two minutes.
Fuel Saving Tips
Fuel Check fuel lines and connections for leakage.
Spark plug Inspect and clean spark plug. Adjust electrode gap.
Air filter Clean air filter element periodically.
Engine oil Check level. Use “Bajaj DTS-i 10000” high performance engine oil for top up or refill.
Brakes Ensure that the brakes are not dragging / binding.
Clutch Ensure correct clutch lever play.
Tyre pressure Always maintain the recommended tyre pressure.
Carburettor Adjust idling speed.
Vehicle Maintenance (Ensure Following)
• Ensure Following Vehicle Maintenance.
20
Safe Riding Tips
• Always wear helmets while driving or riding. Your helmets should conform to appropriate Indian standards.
• Read thoroughly the instructions in this manual and follow them carefully.
• Avoid unnecessary accessories for the safety of both rider and other motorists.
• Get familiar and follow traffic rules and regulations in your states as well as general traffic signs.
• Familiarise yourself well with starting, acceleration and braking of the vehicle.
• When applying the brakes, use both front and rear brakes simultaneously. Applying only one brake may cause the vehicle to loose control.
• Riding at proper speed and avoiding unnecessary acceleration and braking are important not only for safety and low fuel consumption, but also for longer life of the vehicle.
• During monsoon drive the vehicle more cautiously. Remember vehicles skid more easily during light showers.
• Drive cautiously. Start early & reach your destination safely.
• Always carry vehicle registration & insurance papers, and a valid driving licence with you.
• Avoid driving on loose sand or stones where vehicle is likely to skid.
• Properly wrap-up loose clothes while driving or riding to avoid entangling in wheel or other objects on road.
• Always concentrate on riding for safety.
21
General Maintenance Information
• Check engine oil level every day before starting the vehicle.
• Always maintain engine oil level between upper & lower mark provided on cover RH.
Engine Oil Level Checking :
• Park the vehicle on level surface on center stand.
• Check oil level through oil inspection gauge as shown in photograph.
• Always maintain engine oil level between the upper (C) and lower (D) mark provided on Cover RH.
Engine Oil Capacity :
• 1150 ml for refill and 1300 ml on engine overhaul.
Engine Oil
A : Oil Filler Cap
B : Oil Level Inspection Window
Bajaj DTS-i SAE 20W50 of API ‘SL’, JASO 10000 MA Grade
Replacement 1st replacement at 750 Kms. / 1stFrequency* service. Thereafter at every
10,000 Kms.
*For any other branded oil of equivalent grade replacement frequency will be 5000 Kms.
Bajaj Auto recommends “Bajaj DTS-i 10000” engine oil for 10,000 kms drain interval, better performance of engine components & warranty benefits.
CAUTION :
• It is most important to adhere to recommended grade & frequency of oil change for the purpose of long life of critical engine components. For details refer periodic maintenance chart.
• Do not reuse drained oil.
Recommended Oil :
“Bajaj DTS-i 10000” a high performance engine oil developed by Bajaj auto, specially formulated for vehicles with DTS-i engine.
A
B
C
D
22
General Maintenance Information
Drive Chain Slackness
Drive chain fitted on your vehicle is special chain with ‘O’ ring design.
• Care should be taken, that the chain should never run dry.
• Lubricate chain from outside with SAE 90 oil / OKS spray at every 500 kms.
• Chain slackness will have to be adjusted whenever required.
Wheel Puncture :Advisable to visit tyre dealer if possible, or known tubeless tyre repair shops. Usage of a wheel removal / fitment machine strangle recommended.
If at all, tyre levers have to be used, they should be having no sharp edges and the procedure of removal / fitment should not nick / dent the wheel or tyre in any manner.
CAUTION : Tubeless tyres are used on motorcycle. The side walls of the tyres in contact with the wheel rim should not be damaged in any way during fitment / removal of tyre in case of punctures. The tyre side walls in contact with the wheel rim seals air.
Tyre Pressure :Keep appropriate tyre pressure as mentioned below to increase life of the tyre & for better fuel consumption.
2Front 2.00 Kg/Cm (28.5 psi)
2Rear (Solo) 2.00 Kg/Cm (28.5 psi)
2Rear (with Pillion) 2.15 Kg/Cm (32.5 psi)
23
General Maintenance Information
Battery : 12V - 9 Ah, MF
• Battery is located inside ‘Side Cover’ LH.
• Always ensure that battery electrolyte level is in between max & min level marks.
• Check & top up battery by distilled water if electrolyte level is below min level mark.
• Battery life would get adversely affected if top up with ‘Tap Water’.
• Environment care must be taken to dispose off the used battery. It is always recommended to hand over the same to the Authorised battery / Bajaj dealer for proper disposal of the same.
• When battery is found discharged, it is advised to get it charged immediately.
CAUTION : Do not drive/run vehicle in battery disconnected condition. It may lead to damage of electrical /electronic components.
• Warranty on battery is 18 months from the date of purchase of vehicle.
Spark Plug• Remove spark plugs by using plug spanner.
• Clean the spark plugs.
• Adjust the gaps if incorrect by bending outer electrode carefully.
Spark Plug Gap : 0.6~0.9 mm.
Spark Plug Make : CHAMPION RG 6 HC (2 Nos.)
24
General Maintenance Information
Front Brake Fluid Level
• Front brake fluid master cylinder reservoir is located near RH switch on handle bar.
• To check oil level, keep the vehicle on Centre stand with handle bar in straight ahead position.
• Always ensure that brake fluid level is above ‘MIN’ mark given on inspection window.
• Use only DOT 3 or DOT 4 brake fluid (from sealed container) to top up if required.
It is advisable that brake fluid should be replenished at every 30,000 Kms or once in two years which ever occurs earlier.
Monsoon Care :
• It is suggested to customer to take appropriate care in area of heavy monsoon or high rainfall area. The appropriate surface preventive coat to avoid rusting / poor surface f inish on account of adverse atmospheric conditions.
• Vehicle cleaning to be done with soft & clean wet cloth to avoid scratches on painted parts.
• Clean & lubricate all the important parts as detailed in a periodic maintenance chart.
• Do not apply direct water jet on painted, electrical / electronic parts.
• Do not obstruct engine cooling by adding mud protection sheet from front.
25
Daily Safety Checks
Before riding the motorcycle be sure to check the following items. Please give proper importance to these checks and perform all of them before riding the motorcycle. If any irregularities are found during these checks, refer to the Maintenance chapter and see Authorised Dealer / Service center for the action required to return the motorcycle to a safe operating condition.
WARNING : Failure to perform these checks every day before you ride may result in serious damage or severe accident.
What to check Check for
Fuel Enough fuel for the planned distance of operation, no leaks in the fuel lines.
Engine Oil Oil level between upper and lower marks.
Throttle 1. Correct play in the throttle cable (2 to 3 mm)
2. Smooth operation and positive return of the throttle grip to the closed position.
Steering Lock Correct operation.
What to check Check for
Brakes 1. Correct pedal play (25~30 mm).
2. No dragging.
Drive chain 1. Proper slack (30~35 mm).
2. Adequate lubrication.
Lighting Operation of all lights.
Horn Correct functions.
Steering 1. Smoothness.
2. No restriction of movement.
3. Not Loose / Tight.
Clutch 1. Correct lever play. (2 ~ 3 mm).
2. Smooth operation of lever.
Side and Return to their fully up position.Centre Stand
Tyres 1. Correct pressure.
2. Adequate tread depth.
3. No cracks or cuts.
4. No stone stuck in grooves.
Mirrors Correct position and max. rear viewing angle
26
Non-Use Maintenance
Non-use maintenance is necessary if a vehicle remains off road for a longer duration (more than 15 days**). The correct and careful non-use maintenance carried out before storing the vehicle will prevent the vehicle from rusting and from such other non-operational damages like fire hazards.
• Clean the entire vehicle thoroughly.
• Empty the fuel from the fuel tank and carburettor float bowl (if fuel is left in for a longer time, the fuel will break and gummy substance could clog the carburettor).
• Remove the spark plug and put several drops of 2T oil into the cylinder. Kick the engine over slowly a few times to coat the cylinder wall with oil and install back the spark plug.
• Set the vehicle on a box or a stand so that both the wheels are raised off the ground.
• Spray oil on all unpainted metal surfaces to prevent rusting. Avoid getting oil on rubber parts or brake liners.
• Lubricate the control cables.
• Cover the entire vehicle neatly. Make sure that the storage area is well ventilated and free from any source of flames or spark.
• Fill 10% excess air pressure in both wheels.
** For Battery :
a. Remove battery and keep it on wooden plank, in properly ventilated area.
b. Before taking the vehicle for use.
• Get the battery recharged from the Authorised Service Center / Battery Dealer.
• Check and correct the electrolyte level and apply petroleum jelly on terminals (applicable to certain models).
Preparation for regular use after storage :
• Clean the vehicle
• Make sure the spark plug is tight.
• Fill the fuel tank with fuel.
• Change the engine oil.
• Check all the points listed in the Daily Safety Checks section.
• Check and inflate tyres to the proper tyre pressure.
44. Swing arm pivot pin lubrication L L Lubricate at every 20000 Kms
45. Engine foundation silent bush (If applicable) R R R Replace at every 15000 Kms
46. Lubrication of gear starter clutch L L L L L L L L-Every 5,000 kms.
47. Clutch, Accelerator cable R R-Every two years
RECOMMENDED FREQUENCY
ServicingSr.No.
Operation 1st
750
2nd
5000
3rd
10000
4th
15000
5th
20000
6th
25000
7th
30000Kms
Bajaj Auto recommends the following periodic parts replacement for optimum performance of your vehicle as per the schedule.
Qty
1150 ml1st Free Engine Oil
Type of Service Item Description
30 - 45
Days
500 ~ 750
NIL
1150 ml
1
1
1
2 Nos.
1
1
2
1
1
2
2nd Free
3rd Free
1st Paid
NIL
Engine Oil
Steering Stem Bearing Cone Set (If Required)
Rear Wheel Rubber Damper (If Required)
Drive Chain Link Lock
Spark Plug
Air Cleaner Element
Brake Pad / Shoe (If Required)
Valve Oil Seals
Cylinder Head Gasket
Starter Clutch Kit (If applicable)
Engine Silent Bush (If applicable)
240 Days
240 Days
120 Daysfrom the
last service
4500 ~ 5000
9500 ~ 10000
14500 ~ 15000
Kms limit
30
Schedule for Periodic Part Replacement
31
Schedule for Periodic Part Replacement
Qty
1150 ml
1
1
1
1
1
1
1
320 ml
NIL
2nd Paid
3rd Paid
Engine Oil
Air Filter Cover ‘O’ Ring
Carburettor Rubber Duct
Fuel Pipes
Steering Stem Bearing Cone Set (If Required)
Rear Wheel Rubber Dampers (If Required)
Engine Air Breather Tube
Drive Chain Link Lock
Front Fork Oil
NIL
Type of Service Item Description
120 Daysfrom lastservice
Days
19500 ~ 20000
24500 ~ 25000
Kms limit
1150 ml
2 Nos.
Engine Oil
Spark Plugs
4th Paid 29500 ~ 30000
32
Schedule for Periodic Part Replacement
Qty
1
11
75 ml
1
1
1
2
1
4th Paid
Air Cleaner Element
Brake Pad / Shoe
Brake Fluid (If applicable)
Steering Stem Bearing Cone Set (If Required)
Rear Wheel Rubber Damper (If Required)
Drive chain Lock
Valve Oil Seals
Cylinder Head Gasket
Type of Service Item Description
120 Daysfrom lastservice
Days
29500 ~ 30000
Kms limit
1Brake Hose Pipe (If applicable)
1
1
Master Cylinder Cup & Dust Seal (If applicable)
Caliper Piston Seal & Dust Seal (If applicable)
1
2
Starter Clutch Kit (If applicable)
Engine foundation silent bush (If applicable)
34
Warranty : Scopes and Limits
Bajaj Auto Limited gives the following warranty in respect of the motorcycle manufactured by them.
Every possible care and precaution has been taken to ensure quality in respect of the material & workmanship in the vehicles manufactured by us. Bajaj Auto Limited will repair or replace at their Authorised Workshops, free of charge, part or parts there of as may be found, on examination, to have manufacturing defect within a period of 2 Years or 30,000 Kms., whichever occurs earlier from the date of sale subject to fulfillment of condition stipulated in part A, B & C given here under
Warranty is applicable for only first owner of vehicle.
Part A:
Warranty claims in respect of such items like shock absorbers, speedometers etc. though claimed through us, are subject to the acceptance of the respective manufacturers. In all such cases the decision of the respective manufacturer will be final and binding.
Proprietory parts like tyres, tubes, battery and spark plugs are warranted by their respective manufacturers (Only one year warranty from the date of purchase/as applicable) and should be claimed on them directly by the customer. Bajaj Auto Limited shall not be liable in any manner to replace them though their dealers will
“Bajaj Pulsar 220 DTS-i”give full assistance in preferring such claims on respective manufacturers.
Bajaj Auto Limited undertake no liability in the matter of consequential loss or damage caused due to the failure of the parts. Delay, if any, at the repairing workshop in carrying out repair to vehicle shall not be a ground for extending the warranty period, nor shall it give any right to the customer for claiming any compensation for damages.
Bajaj Auto Limited reserves the right either to repair or replace the defective parts.
Where a defective part can be replaced by part/s of alternative brand/s, which are normally used by Bajaj Auto Limited in the course of manufacture, Bajaj Auto Limited reserves the right to carry out the replacement by a part or parts of any such alternative brand/s.
This warranty and any claim arising there from is subject to Pune jurisdiction only.
Part B:
No claim for exchange or repair can be considered unless the customer :
a. Ensures that immediately upon detection of the defect, he approaches any nearest Authorised Bajaj Vehicle Dealers and Recommended Authorised Service Centers with the concerned vehicle and
35
Warranty : Scopes and Limits
enables him to remove and despatch the part/parts attributing to the manufacturing defect to the Company.
b. Produces the Owner's Manual, in original, to enable that dealer to verify the details.
It must be expressly understood that claims forwarded directly to us by the owner / customers will not be entertained at all and such defective part/parts thus forwarded by them will lie at our factory at their own risk, and this warranty shall not be enforceable.
To avail the benefits of warranty, the following are mandatory -
• Availing of Initial 3 Free Services without lapse.
• Availing 4 paid services at every 5000 kms. or 120 days whichever occurs first without any lapse.
• Availing of all above services at the Authorised Vehicle Dealers & Recommended Authorised Service Centers.
• Maintaining all service records duly signed and stamped by dealers.
• Usage of only recommended engine oil at specified frequency - “Bajaj DTS-i 10000” for drain interval of 10000 Kms (or equivalent grade of SAE20W50 API SL + JASO MA for 5,000 Kms. drain interval).
Part C :
Further this warranty is NOT applicable to :
1. Normal maintenance operations like brake & clutch adjustments, cleaning of fuel system, engine tune-up or such other adjustments.
2. Parts subjected to normal wear & tear like Clutch Plates, Brake Shoes, Chain, Sprockets, Fork Oil Seal, Spark Plug, Control Cables, Brake Pad..
3. Replacement of electrical items like self-start’s wear and tear items (if fitted), bulbs & rubber components like grommets, ‘O’ rings, bellows as well as filters, packings, gaskets, fasteners etc.
4. Painted parts. Only blistering or peeling off of paint film are covered under warranty. Any defect arising out of external damages or due to usage of protective covers / additional protective coatings adverse atmospheric condition etc. is not allowed under warranty.
5. All consumables like Engine oil, Fork oil, Brake Oil, Grease etc. are chargeable to customer.
6. Any defect arising due to above consumables not changed as per scheduled or if used other than the recommended one.
Lubrication of Drive Chain with ‘O’ Ring
• Sports vehicles have open Chains.
• “O” rings are used on open chains to prevent dust entry inside Chain.
• “O” rings must always be in wet condition to ensure better performance / Longer life of chain.
• Hence lubricate chain every 500 kms with SAE-90 oil.
• For better retention of lubricant “Chain Lubrication Spray” for chain with “O” rings can be used. We recommend OKS 450/451 spray.
Method of Chain Lubrication :
• Place the bike on center stand; roll the rear wheel in reverse direction while applying lubricant spray.
• Spray the lubricant inside the chain between inner plate & Outer plates, at the rear sprocket location covering entire chain length.
• Also spray the lubricant inside the chain between roller and bushes.
• After lubrication wait for 15 mins.
• Excess lubricant should be wiped with a clean rag before use. Do not use cotton-waste to clean the chain as cotton threads can enter in chain link.
Cleaning by brush Chain lube spray
Maintenance tips for consistent performance
Carry out all free & paid services as per recommendations.
Follow ‘Running-in’ instructions & other riding tips for proper riding habits.
Insist on replacement of periodic parts as recommended in ‘Scheduled for Periodic Part Replacement.
Follow Periodic Maintenance & Lubrication Chart for specific repairs / parts replacements & lubrication.
Always use “Bajaj DTS-i 10000” engine oil of recommended grade in specified quantity.
36
Warranty : Scopes and Limits
7. All chrome plated parts are prone to rust or corrosion in coastal area or in acidic environment or due to neglected cleaning etc. However chrome film peeling is covered under warranty in general atmospheric conditions. Blue/ Yellow colouration of silencer near exhaust port is permissible and hence not covered under warranty.
8. Oxidation of unpainted/painted crankcase, cylinder block, cylinder head etc. in acidic environment or in a coastal area.
9. Valve lapping (De-carbonizing) required to be done at 15,000 kms, which is normal servicing requirement.
10. Parts of the vehicle that have been subjected to misuse, accident, negligent treatment OR which have been used in conjunction with parts & an equipment not manufactured or recommended for use by Bajaj Auto Limited, if in the sole judgement of Bajaj Auto Limited, such use prematurely affects the performance and reliability of the vehicle.
11. Parts of the vehicle that have been altered and modified or replaced in unauthorised manner like use of non OE air filters, wider tyres, loud silencers etc and which in the sole judgement of the Bajaj Auto Limited affects its performance and reliability.
12. Vehicles which are not being serviced at recommended dealers as per the service schedule described or which have not been operated or maintained in accordance with the instructions maintained in the Owner’s Manual.
13. Vehicles used for any competition or race and/or for attempting to set up any kind of record.
14. Any failure arising due to use of adulterated or bad quality fuel.
Parts affected due to bad fuel quality are not covered Under warranty.
Bajaj Auto Limited reserves the right to make any changes in design or to add any improvements on the vehicle at any time without incurring any obligation to install the same on a vehicle previously supplied and sold. Also, the conditions of this warranty are subject to alteration without any notice.
This warranty is the entire written warranty given by Bajaj Auto Limited for motorcycle’ and no other person, including the Bajaj dealer or its or his agent or employee is authorised to extend or enlarge this warranty.
“Bajaj Pulsar 220 DTS-i”
Use only Bajaj Genuine Parts
parts
AlwaysInsist
on
For optimum performanceof vehicle
For prolonged life ofcomponents & vehicle
For economical maintenance cost
Genuinity Test
Ge
nu
ine
M.R.P. (Incl. of All Taxes) in Rs. for Qty. packed
57.43
03100802P0001
55.58
IN ASSAM, KARNATAKA, MANIPUR, M.P., NAGALAND, U.P., & UTTARANCHAL IN OTHER STATES
