PROJECT NAME:_____________________________ CATALOG NUMBER:__________________________
NOTES:______________________________________FIXTURE SCHEDULE:_________________________
Phone: 1-800-555-5629 | Fax: 973-244-7333 | Web: www.maxlite.com | E-mail: [email protected]
Revised: 01-09-18
Page: 1 of 4
PRODUCT DESCRIPTION:The MaxLite ArcMAX™ Lay-In LED panels are LEDreplacements for fluorescent troffers in new or remodel construction. MaxLite’s performance optic system, advanced light distribution and architectural styling delivers unprecedented value. High efficacy, excellent color rendering, and low glare combined with a sustainable construction positions these fixtures as ideal solutions for offices, schools, hospitals, retail, and other applications.
FEATURES:• 36W & 45W• Available in 3500K, 4000K• 50,000 Hr. life• Dimming: 0-10V standard• CRI: ≥80• Controlled brightness optic eliminates pixelation• LM-79 test data available• Available in 1’x4’, 2’x2’, and 2’x4’• Five year limited warranty
CONSTRUCTION:• Steel housing and reflectors• Angled interior end caps with powder coat finish• PC reflector end caps• Polycarbonate milky white diffuser cover• External driver housing with rear access
ArcMAXSB SERIES
MODEL SELECTION (Full list of order codes on pg. 2) Typical order example: MLVT22D3635/SB
MLVT SB
FAMILY SIZEWATTAGE
(NOMINAL) CCT VERSION OPTIONS
MLVT= Volumetric Troffer 14D=22D= 24D=
1’ x 4’ Dimmable2’ x 2’ Dimmable2’ x 4’ Dimmable
40=36=45=
36W36W45W
35=40=
3500K4000K
SB= Single Basket Version (OMIT)=
1EM=
None
Emergency Battery Backup
MLVT22D
MLVT24D
NOTES:1. In the event of a power failure, the battery backup units
switch to emergency mode and operates the fixture for a minimum of 90 minutes
MLVT14D
SPECIFY THIS MODEL FOR LEMON TREE
SPECIFY AND INSTALL: MaxLite MLVT22D3635/SB White SB Single Light 23-11/16" Wide Integrated LED Troffer - 36W LED Color Temperature: 3500K
Phone: 1-800-555-5629 | Fax: 973-244-7333 | Web: www.maxlite.com | E-mail: [email protected]
Revised: 01-09-18
Page: 4 of 4
ArcMAXSB SERIES
DIMENSIONS:
C
B
A
PRODUCT A B C
1x4 47.7” 11.9” 5.4”
2x2 23.7” 23.7” 3.54”
2x4 47.2” 23.7” 3.54”
Item: 88750-SUCF/PD/Z/Y YELLOW ZED FIXTURE SUNLITE
744 Clinton St. Brooklyn, NY 11231 | 718.768.7000 www.sunlite.com
Sunlite CF/PD/Z/Y Yellow Zed Ceiling Pendant Light Fixtures With Medium (E26) Baseo 71.2" long including the 4' cord and 10" wide yellow
finish interior light pendants
o Compatible with a 60 Watt incandescent light bulbs or anequivalent LED light bulbs
o Yellow finish
o Hanging pendant mounted
o Features a Medium (E26) base
General CharacteristicsMaterial MetalCover CageFinish YellowBase Medium (E26)Safety Rating UL Listed - Dry Location
Fixture CharacteristicsCollection ZedStyle ModernShape CanopyNumber of Lights 1 - LightMounting PendantsUse Location Indoor
Electrical CharacteristicsVolts 120
Product DimensionsCord Length 4' Foot CordHeight (in) 10Diameter (in) 10Package Dimensions (in) (W) 11.00 (H) 10.80 (D) 11.10
Product DataItem Number 88750-SUCase Quantity 1Barcode on SKU 653703887500Brand SUNLITEDescription CF/PD/Z/Y
Lemon Tree: contractor to Supply LED Dimmable Edison Bulb A19, 6W Vintage LED Filament, 2700K Soft White, 60W Incandescent Equivalent, E26 Medium Base Lamp
LED Recessed Downlighting
LK5G5" Gimbal LED Recessed Kit
IC/Non-ICNew & Remodel Construction
FEATURES & SPECIFICATIONSINTENDED USE — Recessed LED kits include housing, trim, and wire connectors in one package. The LED kit is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. The LED kit maintains at least 70% light output for 35,000 hours.
CONSTRUCTION — Steel housing with 3 remodel clips and 3 wire nuts for installation in existing plaster, sheet rock or mechanical ceiling. Heavy-gauge galvanized steel raceway arm. Durable, powder coat paint prevents rust. Easily converts to new construction application using accessories (sold separately).
Galvanized steel junction box with three 7/8" knockouts with slots for pryout. Not suitable for pulling wires.
Hook & hang snap-on J-box doors for easy access.
Rated for 90°C. Ground wire provided.
Available in 3000 K or 5000 K color temperature LEDs.
OPTICS — White gimbal recesses optical system into the ceiling to prevent glare and provide a traditional look. Diffused lens provides even illumination throughout the space.
ELECTRICAL — High-efficiency driver mounted on the module. Primary power disconnect provided for simple connection to a dedicated LED connector in the housing.
Dimming down to 15%. See page 2 for recommended triac dimmers.
Standard input wattage is 10.6W, 67 lumens per watt (3000 K), 10.2W, 84 lumens per watt (5000 K); equivalent to 50 watt PAR20.
LISTINGS — CSA certified for use in the US and Canadian safety standards. California T24 compliant. ENERGY STAR® qualified. WSEC ASTM E283 for Air-Tight. Damp location listed.
WARRANTY — 3-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
LK5GMW LED
Series Reflector Finish Lamps Color temp/CRI/Watts/Lumens Voltage
LK5 5" LED recessed kit G Gimbal MW Matte white LED (blank) 3000 K/93CRI/10.6W/720L50K 5000 K/95CRI/10.2W/856L
(blank) 120V
Accessories: Order as separate catalog number.
LKA5P 5" new construction panLKABH Hanger bars for conversion to new construction
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: LK5GMW LED
DIM
MABLE
LKABH Hanger bars
LKA5P New construction pan
DOWNLIGHTING LK5G-LED_(GEN4)
All dimensions are inches (centimeters) unless otherwise indicated.
5(12.7)
9(22.9)
6(15.2)
6-1/4(15.9)
Specifications
Aperture: 5 (12.7)
Ceiling opening: 5-1/2 (14)
Overlap trim: 6-1/4 (15.9)
Height: 6 (15.2)
Length: 9 (22.9)
Catalog Number
Notes
Type
5" Gimbal LED Recessed Downlighting Kit
ENERGY DATA*
3000 K 5000 K
Lumens 720 856
CRI 93 95
Min. starting temp -18°C (0°F) -18°C (0°F)
EMI/RFI FCC Title 47 CFR, Part 15, Class B FCC Title 47 CFR, Part 15, Class B
Sound rating Class A standards Class A standards
Input voltage 120V 120V
Min. power factor 0.80 0.80
Input frequency 50/60 Hz 50/60 Hz
Rated wattage 10.6W 10.2W
Input power 10.6W 10.2W
Input current 0.089A 0.085A*Values at non-dimming line voltage.
DIMMING & ENERGY DATA
INSTALLATIONThe following instructions are for remodel applications. New construction applications require new construction pan and hanger bars (see accessories).
Step 3:Snap (4) springs to secure housing to ceiling.
Step 1:Using provided stencil, trace cutout lines for housing hole on ceiling. Use saw to make appropriate 5-1/2" cutout.
Step 2:Using provided wire connectors, connect wires (black to black; white to white; ground to ground) and insert housing into ceiling.
Step 4:Insert trim into housing.
5-1/2
LK5G-LED_(GEN4)
DOWNLIGHTING: One Lithonia Way Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com © 2012-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 07/05/17
DIMMER COMPATIBILITY
Lutron Leviton Pass & Seymour Synergy/Leviton Insteon
DVELV-300P 6615-P H703PTUTC ISD 400 ELV 120 / IPE04 2477D
300P SELV 6633-PA H703PNICCV4 ISD 600 I 120 / IPI06
DIVA-600P 6674 - CFL mode D1103P ISD 1000 I 120 / IPI10
NTELV-300P 6674 - LED/INC mode HCL453PTCCCV6
TGCL-153PH-WH TD703PWCCV6
AYCL-250W-NEMA LS 603 PWV
DVCL-153P-WH
AYCL-153P-WH
CTCL-153P-WH
D-603P-WH
CT-603PR-WH
LED Recessed Downlighting
LK5B5" Baffle LED Recessed Kit
IC/Non-ICNew & Remodel Construction
FEATURES & SPECIFICATIONSINTENDED USE — Recessed LED kits include housing, trim, and wire connectors in one package. The LED kit is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. The LED kit maintains at least 70% light output for 35,000 hours.
CONSTRUCTION — Steel housing with 4 remodel clips and 3 wire nuts for installation in existing plaster, sheet rock or mechanical ceiling. Heavy-gauge galvanized steel raceway arm. Durable, powder coat paint prevents rust. Easily converts to new construction application using accessories (sold separately).
Galvanized steel junction box with three 7/8" knockouts with slots for pryout. Not suitable for pulling wires.
Hook & hang snap-on J-box doors for easy access.
Rated for 90°C. Ground wire provided.
Available in 3000 K or 5000 K color temperature LEDs.
OPTICS — White baffle recesses optical system into the ceiling to prevent glare and provide a traditional look. Diffused lens provides even illumination throughout the space.
ELECTRICAL — High-efficiency driver mounted on the module. Primary power disconnect provided for simple connection to a dedicated LED connector in the housing.
Dimming down to 15%. See page 2 for recommended triac dimmers.
Standard input wattage is 10.6 W, 62 lumens per watt (3000 K) and 10.2W, 77 lumens per watt (5000 K); equivalent to 65 watt PAR30.
LISTINGS — ETL certified for use in the US and Canadian safety standards. California T24 compliant. ENERGY STAR® qualified. WSEC ASTM E283 for Air-Tight. Wet location listed.
WARRANTY — 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice.
Accessories: Order as separate catalog number.
LKA5P 5" new construction panLKABH Hanger bars for conversion to new construction
All dimensions are inches (centimeters) unless otherwise indicated.
5-9/16”(14.13)
9”(22.9)
6”(15.2)
6-3/8”(16.2)
Specifications
Aperture: 5 (12.7)
Ceiling opening: 5-1/2 (14)
Overlap trim: 6.4 (16.3)
Height: 6 (15.2)
Length: 9 (22.9)
Max. ceiling thickness: 1 (2.54)
DIM
MABLE
LKABH Hanger bars
LKA5P New construction pan
DOWNLIGHTING LK5B-LED_(GEN4)
LED
Series Reflector Finish Lamps Color temp/CRI/Watts/Lumens Voltage
LK5 5" LED recessed kit B Baffle MW Matte whiteORB Oil-rubbed bronze
LED (blank) 3000 K/93CRI/10.6W/660L (WH), 530L (ORB)50K 5000 K/94CRI/10.2W/790L (WH), 580L (ORB)
(blank) 120V
ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: LK5BMW LED
Catalog Number
Notes
Type
5" Baffle LED Recessed Downlighting Kit
INSTALLATIONThe following instructions are for remodel applications. New construction applications require new construction pan and hanger bars (see accessories).
Step 3:Snap (4) springs to secure housing to ceiling.
Step 1:Using provided stencil, trace cutout lines for housing hole on ceiling. Use saw to make appropriate 5-1/2" cutout.
Step 2:Using provided wire connectors, connect wires (black to black; white to white; ground to ground) and insert housing into ceiling.
Step 4:Insert trim into housing.
5-1/2
LK5B-LED_(GEN4)
DOWNLIGHTING: One Lithonia Way Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com © 2012-2017 Acuity Brands Lighting, Inc. All rights reserved. Rev. 07/06/17
ENERGY DATA*
3000 K MW/ORB 5000 K MW/ORB
Lumens 660/530 790/580
CRI 93 94
Min. starting temp -18°C (0°F) -18°C (0°F)
EMI/RFI FCC Title 47 CFR, Part 15, Class B
FCC Title 47 CFR, Part 15, Class B
Sound rating Class A standards Class A standards
Input voltage 120V 120V
Min. power factor 0.80 0.80
Input frequency 50/60 Hz 50/60 Hz
Rated wattage 10.6W 10.2W
Input power 10.6W 10.2W
Input current 0.14A 0.85A*Values at non-dimming line voltage.
DIMMING & ENERGY DATA
COMPATIBLE DIMMERS*
Lutron Model No:• DVELV-300P• 300P SELV• NTELV-300P• DVCL-153P-WH• CT-603PR-WHLeviton Model No:• 6615-PPass & Seymour Model No:• H703PTUTC• H703PNICCV4• D1103P• HCL453PTCCCV6• TD703PWCCV6Synergy/Leviton Model No:• ISD 400 ELV 120 / IPE04• ISD 600 I 120 / IPI06• ISD 1000 I 120 / IPI10Insteon Model No:• 2477D
*Unlisted dimmers do not imply non-compatibility.
243 TechLine 877 276-7876armstrongceilings.com/commercial
CORTEGA®/CORTEGA® Second Look®
Square Lay-in & Tegularmedium texture
TYPICAL APPLICATIONS• Storage and supply rooms• Discount stores• Utility Rooms
KEY SELECTION ATTRIBUTES• Economical • Non-directional visual reduces scrap and installation time
(excludes Second Look® items)• Geometric Scored Visuals (Second Look items)
Cortega® Angled Tegular panels with Prelude® 15/16" suspension system (Pgs. 391-392)
Cortega® Second Look® ll panels with Suprafine® 9/16" suspension system (Pgs. 400-401)
Tech Black (BL) Item 769
COLORS Colored ceilings are dye-lotted and should be segregated by dye lot. Do not mix.
White (WH)
Cortega® panels offers a medium-textured, economical solution with standard acoustical absorption.
DETAILS (Other Suspension Systems compatible. Refer to listing on page 244.)
1. Cortega Square Lay-in2. Cortega Beveled Tegular3. Cortega Second Look4. Cortega Lay-in with Prelude 15/16" suspension system5. Cortega Beveled Tegular with Suprafine 9/16" suspension system
31 2 4 5
FACE VIEW
Cortega Second Look II panels – Scoring creates nominal 24" x 24" squares
Cortega Second Look I panels – Scoring creates nominal 12" x 12" squares
MIN
ERAL FIBER
TechLine / 1 877 276-7876 armstrongceilings.com/commercial
(search: cortega)BPCS-3017/3022-517 244
LEED® is a registered trademark of the U.S. Green Building Council UL is a registered trademark of UL LLC. All other trademarks used herein are the property of AWI Licensing LLC and/or its affiliates © 2016-2017 AWI Licensing LLC Printed in the United States of America
CORTEGA®/CORTEGA® Second Look®
Square Lay-in & Tegularmedium texture
VISUAL SELECTION PERFORMANCE SELECTION Dots represent high level of performance.
Edge Profile
Susp. Dwg.Pgs. 407-411armstrongceilings. com/catdwgs
Item No. ◆
Dimensions (Inches)
UL Classified
Acoustics
Tota
l Ac
oust
ics1
Fire
Pe
rfor
man
ce
Ligh
t Re
flect
Anti-
Mol
d &
Mild
ew
Sag
Resi
st
Cert
ified
Low
VO
C Em
issi
ons
Dura
bilit
y
Recy
cled
Co
nten
t
Recy
cled
Pr
ogra
m
War
rant
y
NRC + =
CORTEGA® Square Lay-in
15/16" Square Lay-in
Square Lay-in 9/16" Angled Tegular 15/16" Angled Tegular Ultima Plank ShipLapLong Edge Detail
Ultima Plank ShipLapK2C2 Short
15/16" Chamford TegularCirrus Profiles Chamfered
Tongue and GrooveConcealed Beveled K4C4
Classic Step Tegular Ultima Plank ShipLapLong Edge Detail
Ultima Plank ShipLapBeveled Tegular Short
15/16 Classic Step Tegular~8-ID (99) (drw 10)
9/16" Beveled Tegular 15/16" Beveled Tegular 9/16" Square Cut Tegular 15/16" Square Tegular
9/16" Chamfered TegularCirrus Profiles Chamfered
Concealed Soft Look Radiused Tegular
9/16" Cubic Graphis NeoCubic
9/16" Flush TegularLedges
15/16" Flush TegularLedges
9/16" Wrapped TegularGraphis Wrapped Linear
and Cubic
9/16" Wrapped Linear and Mixed Corner “B”
(Flumes, Graphis Linear Corner & Dots & Squares)
Concealed Square Edge K4C4
Linear Cubic Beveled Crossgate
A B15/16" Vector
C D15/16" Vector C & D
A B C D
1 770 770M
24 x 24 x 5/8" 600 x 600 x 15mm
0.55 33 – Class A
0.82 – Std • Std Std • 1-Yr
1 824 824M
24 x 24 x 5/8" 0.55 35 •
– Fire Guard™
0.82 – Std • Std Std • 1-Yr
1 769 _ _◆
769M24 x 48 x 5/8" 600 x 1200 x 15mm
0.55 35 •
– Class A
0.82 – Std • Std Std • 1-Yr
1 823 823M
24 x 48 x 5/8" 0.55 35 •
– Fire Guard
0.82 – Std • Std Std • 1-Yr
1 747 24 x 48 x 5/8" 0.55 40 •
– Class A
0.82 – Std • Std Std • 1-Yr
1 773 773M
20 x 60 x 5/8" 500 x 1500 x 15mm
0.55 35 •
– Class A
0.82 – Std • Std Std • 1-Yr
1 772 772M
24 x 60 x 5/8" 600 x 1500 x 15mm
0.55 35 •
– Class A
0.82 – Std • Std Std • 1-Yr
1 Other Size Panels
W: 12" – 30" / L: 18" – 72" 5/8" Thick
N/A N/A – Class A
0.82 – Std • Std Std • 1-Yr
CORTEGA Tegular15/16" Angled Tegular
Square Lay-in 9/16" Angled Tegular 15/16" Angled Tegular Ultima Plank ShipLapLong Edge Detail
Ultima Plank ShipLapK2C2 Short
15/16" Chamford TegularCirrus Profiles Chamfered
Tongue and GrooveConcealed Beveled K4C4
Classic Step Tegular Ultima Plank ShipLapLong Edge Detail
Ultima Plank ShipLapBeveled Tegular Short
15/16 Classic Step Tegular~8-ID (99) (drw 10)
9/16" Beveled Tegular 15/16" Beveled Tegular 9/16" Square Cut Tegular 15/16" Square Tegular
9/16" Chamfered TegularCirrus Profiles Chamfered
Concealed Soft Look Radiused Tegular
9/16" Cubic Graphis NeoCubic
9/16" Flush TegularLedges
15/16" Flush TegularLedges
9/16" Wrapped TegularGraphis Wrapped Linear
and Cubic
9/16" Wrapped Linear and Mixed Corner “B”
(Flumes, Graphis Linear Corner & Dots & Squares)
Concealed Square Edge K4C4
Linear Cubic Beveled Crossgate
A B15/16" Vector
C D15/16" Vector C & D
A B C D
12 704 704M
24 x 24 x 5/8" 600 x 600 x 15mm
0.55 33 – Class A
0.82 – Std • Std Std • 1-Yr
12 816 24 x 24 x 5/8" 0.55 35 •
– Fire Guard
0.82 – Std • Std Std • 1-Yr
12 703 703M
24 x 48 x 5/8" 0.55 35 •
– Class A
0.82 – Std • Std Std • 1-Yr
9/16" Beveled Tegular
Square Lay-in 9/16" Angled Tegular 15/16" Angled Tegular Ultima Plank ShipLapLong Edge Detail
Ultima Plank ShipLapK2C2 Short
15/16" Chamford TegularCirrus Profiles Chamfered
Tongue and GrooveConcealed Beveled K4C4
Classic Step Tegular Ultima Plank ShipLapLong Edge Detail
Ultima Plank ShipLapBeveled Tegular Short
15/16 Classic Step Tegular~8-ID (99) (drw 10)
9/16" Beveled Tegular 15/16" Beveled Tegular 9/16" Square Cut Tegular 15/16" Square Tegular
9/16" Chamfered TegularCirrus Profiles Chamfered
Concealed Soft Look Radiused Tegular
9/16" Cubic Graphis NeoCubic
9/16" Flush TegularLedges
15/16" Flush TegularLedges
9/16" Wrapped TegularGraphis Wrapped Linear
and Cubic
9/16" Wrapped Linear and Mixed Corner “B”
(Flumes, Graphis Linear Corner & Dots & Squares)
Concealed Square Edge K4C4
Linear Cubic Beveled Crossgate
A B15/16" Vector
C D15/16" Vector C & D
A B C D
29, 44, 48, 52, 56
2195 2195M
24 x 24 x 5/8" 0.55 35* •
– Class A
0.82 – Std • Std Std • 1-Yr
29, 44, 48, 52, 56
Other Size Panels
W: 12" – 30" / L: 18" – 72" 5/8" Thick
N/A N/A – Class A
0.82 – Std • Std Std • 1-Yr
CORTEGA® Second Look® I 15/16" Angled Tegular 11 2765 24 x 48 x 3/4" 0.55 35
•– Class
A0.82 – Std • Std Std • 1-Yr
CORTEGA Second Look II15/16" Angled Tegular
Square Lay-in 9/16" Angled Tegular 15/16" Angled Tegular Ultima Plank ShipLapLong Edge Detail
Ultima Plank ShipLapK2C2 Short
15/16" Chamford TegularCirrus Profiles Chamfered
Tongue and GrooveConcealed Beveled K4C4
Classic Step Tegular Ultima Plank ShipLapLong Edge Detail
Ultima Plank ShipLapBeveled Tegular Short
15/16 Classic Step Tegular~8-ID (99) (drw 10)
9/16" Beveled Tegular 15/16" Beveled Tegular 9/16" Square Cut Tegular 15/16" Square Tegular
9/16" Chamfered TegularCirrus Profiles Chamfered
Concealed Soft Look Radiused Tegular
9/16" Cubic Graphis NeoCubic
9/16" Flush TegularLedges
15/16" Flush TegularLedges
9/16" Wrapped TegularGraphis Wrapped Linear
and Cubic
9/16" Wrapped Linear and Mixed Corner “B”
(Flumes, Graphis Linear Corner & Dots & Squares)
Concealed Square Edge K4C4
Linear Cubic Beveled Crossgate
A B15/16" Vector
C D15/16" Vector C & D
A B C D
11 2758 24 x 48 x 3/4" 0.55 40 •
– Fire Guard
0.82 – Std • Std • • 1-Yr
11 2767 24 x 48 x 3/4" 0.55 35 •
– Class A
0.82 – Std • Std • • 1-Yr
9/16" Angled Tegular
Square Lay-in 9/16" Angled Tegular 15/16" Angled Tegular Ultima Plank ShipLapLong Edge Detail
Ultima Plank ShipLapK2C2 Short
15/16" Chamford TegularCirrus Profiles Chamfered
Tongue and GrooveConcealed Beveled K4C4
Classic Step Tegular Ultima Plank ShipLapLong Edge Detail
Ultima Plank ShipLapBeveled Tegular Short
15/16 Classic Step Tegular~8-ID (99) (drw 10)
9/16" Beveled Tegular 15/16" Beveled Tegular 9/16" Square Cut Tegular 15/16" Square Tegular
9/16" Chamfered TegularCirrus Profiles Chamfered
Concealed Soft Look Radiused Tegular
9/16" Cubic Graphis NeoCubic
9/16" Flush TegularLedges
15/16" Flush TegularLedges
9/16" Wrapped TegularGraphis Wrapped Linear
and Cubic
9/16" Wrapped Linear and Mixed Corner “B”
(Flumes, Graphis Linear Corner & Dots & Squares)
Concealed Square Edge K4C4
Linear Cubic Beveled Crossgate
A B15/16" Vector
C D15/16" Vector C & D
A B C D
27 2776 24 x 48 x 3/4" 0.55 30 – Class A
0.82 – Std • Std • • 1-Yr
1 Total Acoustics® ceiling panels have an ideal combination of noise reduction and sound-blocking performance in one product. ◆ Add 2-letter color suffix to item number when specifying or ordering (e.g., 769 B L).
SUSPENSION SYSTEMS * Item 2195 – CAC 31 on 9/16" Silhouette®.
15/16" 9/16"
Prelude®, Prelude® XL® Fire Guard™
Silhouette®
1/4"Silhouette®
1/8" Suprafine® Interlude® XL HRC Sonata® XL
NOTE: 9/16" Cortega Second Look items are installed using Suprafine® suspension systems only.
$$$$ ▲ LOCATION DEPENDENT
LEED
®
ener
gy
man
agem
ent
recy
clab
le/
exte
nded
pr
oduc
er re
sp.
mat
eria
l in
gred
ient
re
port
ing
recy
cled
co
nten
tso
urci
ng o
f ra
w m
ater
ials
low
em
ittin
g/
mat
eria
lslig
htin
g
qual
ity
biob
ased
m
ater
ials
regi
onal
m
ater
ials
desi
gn fo
r fle
xibi
lity
cons
truc
tion
was
te m
gmt
EPD
acou
stic
s
Calculate LEED contribution at armstrongceilings.com/greengenie55% RECYCLED
CONTENTUP T
O
CORT
EGA
2ND L
OOK
CORT
EGA
43%
PHYSICAL DATAMaterialWet-formed mineral fiberSurface FinishFactory-applied latex paint Fire PerformanceASTM E84 and CAN/ULC S102 surface burning characteristics. Flame Spread Index 25 or less. Smoke Developed Index 50 or less (UL labeled). Fire Guard: A fire-resistive ceiling when used in applicable UL assemblies (Class A).ASTM E1264 ClassificationType III, Form 2, Pattern C DHumidity/Sag Resistance Standard performance ceiling panels are recommended where the building is enclosed and the HVAC is continuously functioning.
VOC Emissions Third-party certified compliant with California Department of Public Health CDPH/EHLB/Standard Method Version 1.1, 2010. This standard is the guideline for low emissions in LEED, CalGreen Title 24, ANSI/ASHRAE/USGBC/IES Standard 189; ANSI/GBI Green Building Assessment Protocol. (Excludes 769BL)Primary (Embodied) Energy See all LCA information on our EPD’s.High Recycled ContentContains greater than 50% total recycled content. Total recycled content based on product composition of post-consumer and pre-consumer (post-industrial) recycled content per FTC guidelines.Insulation Value2195, 704, 816, 703 – R Factor – 1.6 (BTU units);R Factor – 0.28 (Watts units)770, 772, 769, 773, 823, 824 – R Factor – 1.5 (BTU units); R Factor – 0.26 (Watts units)
747, 2765, 2758, 2767, 2776 – R Factor – 1.5 (BTU units); R Factor – 0.26 (Watts units)Weight; Square Feet/Carton769 – 0.61 lbs/SF; 96 SF/ctn 704, 2195 – 0.63 lbs/SF; 64 SF/ctn772, 773 – 0.63 lbs/SF; 100 SF/ctn703 – 0.65 lbs/SF; 80 SF/ctn 770 – 0.69 lbs/SF; 64 SF/ctn 816 – 1.08 lbs/SF; 48 SF/ctnMinimum Order Quantity 1 carton, excludes other size panels.Metric Items Available770M, 824M, 769M, 773M, 772M, 2195M, 704M, 703M, 823M – Metric items are subject to extended lead times and minimum quantities. Contact your representative for more details.
823 – 1.09 lbs/SF; 48 SF/ctn 747, 824 – 1.09 lbs/SF; 64 SF/ctn 2765, 2767 – 0.73 lbs/SF; 80 SF/ctn2758 – 1.26 lbs/SF; 64 SF/ctn2776 – 0.70 lbs/SF; 80 SF/ctn
07.06.2017 | Page 1
P R O D U C T S U B M I T T A L T P R W A L L B A S E
700 series
Roppe Corporation | 1602 N. Union St. - Fostoria, OH 44830 | (800) 537 - 9527
700 Series Wall Base, 6" CoveManufacturerRoppe Corporation 1602 N. Union Street P.O. Box 1158 Fostoria, Ohio USA 44830-1158 Website - www.roppe.comt: (419) 435.8546 tf: (800) 537.9527f: (419) 435.1056 e-mail: [email protected]
Product Description Our 700 Series wall base is an outstanding selection for any installation. Easier to work with and providing more flexibility than vinyl base products, Roppe's unique blend of thermoplastic rubber and vinyl makes the 700 Series an attractive and economical choice for a variety of applications.
FeaturesExtremely Durbale and FlexibleWill not Shrink, Gap or CupRecycleable (IMPACT Recycling Program)Qualifies for LEED® CreditsFloorScore® Certified
700 Series, 6"
Technical DataLEED v2009 IEQ Credit 4.1: QualifiesASTM F1861 - Resilient Wall Base: Type TP, Group 2, Style BASTM E648 (NFPA 253) - Critical Radiant Flux: Class I, > 0.45 W/cm2ASTM E662 (NFPA 258) - Smoke Density: Passes, <450ASTM E84 - Flammability: Class A
attach color submittal
sample here
*For complete adhesive, installation & maintenance instructions, visitwww.roppe.com
WarrantyRoppe Provides a 2 year Limited Warranty on all 700 Series Wall Base. For additional information, see associated Warranty documents.
Technical Document SupportAdditional product resources and technical documents are available online at www.roppe.com. For additional technical support, send an e-mail to [email protected]
Availability, Cost & SamplesRoppe Flooring products are sold through distribution. To locate the nearest distributor, visit www.roppe.com. or send an email to [email protected]
Installation* (Visit our website for complete Installation instructions)
All material is to be delivered to the installation location in its original packaging with labels intact. The installation area, unboxed wall base and adhesive are to be maintained between 65° (19°C) and 85° (30°C) for at least 48 hours before installation, during installation and thereafter. Proceed with the installation only when the conditions are proper and correct. Inspect all material for proper type and color. A bond test should be performed at least 72 hours prior to the scheduled installation to ensure the surface is suitable and there should be extreme difficulty in removing the wall base from the surface.
Adhesives* (Visit our website for complete Adhesive instructions)
AW-510 Acrylic Wet-Set AdhesiveUnit Size: 1 or 4 Gallon UnitsVOC: < 0.1 g/lCoverage Rate: 160 sq. ft. per gallon Substrate: PorousWB-600 Acrylic Wall Base AdhesiveUnit Size: 30 oz. Cartridge, 1 Gallon and 4 Gallon UnitsVOC: < 12 g/lTrowel Coverage Rate: 180-340 lin. ft. per gallon Cartridge Coverage Rate: 30-70 lin. ft. per cartridgeSubstrate: PorousC-630 Contact AdhesiveUnit Size: 1 QuartVOC: 0.0 g/lCoverage Rate: 20-40 sq. ft. per unit or 120-140 lin. ft. per unit.Substrate: Non-Porous
Maintenance* (Visit our website for complete Maintenance instructions)
700 Series wall base can be cleaned with a neutral pH cleaner and a soft wet cloth.
CAN/ULC-S102.2 - Surface Burning: FSR 10, SDS 60Acclimation Time: 48 HoursStorage & Acclimation Temperature: 65 ° - 85 ° F
Toe Type:Base Height:Base Thickness:Base Length:Carton Quantity:Carton Weight:
Cove6" (152.1 mm)1/8" (3.2 mm)48" Sections or 120' ft. Coils30 pieces or 1 coil62 lbs.
Additional Accessories: Inside and outside factory corners are available to match wall base installations.