+ All Categories
Home > Documents > Using the Epilog Legend 36EXT Laser

Using the Epilog Legend 36EXT Laser

Date post: 25-Feb-2016
Category:
Upload: palti
View: 52 times
Download: 5 times
Share this document with a friend
Description:
Using the Epilog Legend 36EXT Laser. Giorgos Nikoleris. 2007. Parts made in our laser. Specifications. Maximum Engraving Area: 900 X 600 mm Maximum Material Thickness : 300 mm (350mm) Effect : 60W CO 2 laser. Materials. Engrave: - PowerPoint PPT Presentation
38
Using the Epilog Legend 36EXT Laser Giorgos Nikoleris 2007
Transcript
Page 1: Using the  Epilog  Legend 36EXT Laser

Using the Epilog Legend 36EXT Laser

Giorgos Nikoleris

2007

Page 2: Using the  Epilog  Legend 36EXT Laser

Parts made in our laser

2008 Giorgos Nikoleris 2

Page 3: Using the  Epilog  Legend 36EXT Laser

Specifications

• Maximum Engraving Area: 900 X 600 mm

• Maximum Material Thickness: 300 mm (350mm)

• Effect: 60W CO2 laser

2008 Giorgos Nikoleris 3

Page 4: Using the  Epilog  Legend 36EXT Laser

2008 Giorgos Nikoleris 4

Page 5: Using the  Epilog  Legend 36EXT Laser

MaterialsEngrave:             Wood, Acrylic, Glass, Plastic Coated Metal, Anodized Aluminum, Ceramic, Delrin, Leather, Marble, Granite, Matte Board, Melamine, Paper, Pressboard, Rubber, Wood Veneer, Fiberglass, Circuit Boards, Stainless Steel, Painted Metal, Cork, Corian, Cloth, Mylar, Tile  Cut:             Wood, Acrylic, Plastic, Delrin, Cloth, Leather, Matte Board, Paper, Mylar, Pressboard, Rubber, Wood Veneer, Fiberglass, Cork, Melamine, Corian  2008 Giorgos Nikoleris 5

Page 6: Using the  Epilog  Legend 36EXT Laser

Cutting of non-metals• Melt shearing– Thermoplastics: (Nylon, Polystyrene, …)

• Vaporization– Acrylic: BEST CHOICE, perfect cut edges – Polyacetal (large volumes of gaseous

formaldehyde)• Chemical degradation– Thermoset polymers, cellulosic material, rubber,

epoxy resins• Cellulosic material: 2000 °C

– PVC: Dangerous !! Highly toxic HCl fumes2007 Giorgos Nikoleris 6

Page 7: Using the  Epilog  Legend 36EXT Laser

Laser process

2008 Giorgos Nikoleris 7

Page 8: Using the  Epilog  Legend 36EXT Laser

Cutting wood or other grained material

2008 Giorgos Nikoleris 8

Page 9: Using the  Epilog  Legend 36EXT Laser

Lowering the table before focusing

2008 Giorgos Nikoleris 9

Page 10: Using the  Epilog  Legend 36EXT Laser

Auto Focus

2008 Giorgos Nikoleris 10

Page 11: Using the  Epilog  Legend 36EXT Laser

The Printer Preferences window

2008 Giorgos Nikoleris 11

Page 12: Using the  Epilog  Legend 36EXT Laser

Table of line weight that will Raster engrave at a given resolution

2008 Giorgos Nikoleris 12

Page 13: Using the  Epilog  Legend 36EXT Laser

Table of line weight that will Vector Cut at a given resolution

2008 Giorgos Nikoleris 13

Page 14: Using the  Epilog  Legend 36EXT Laser

Summary

• Use always 600dpi• Use line weight 0.025mm to

cut• Use line weight greater than

0.175mm to engrave• Or if you are doing something very special consult the

tables …• Note: Check for hidden lines

2008 Giorgos Nikoleris 14

Page 15: Using the  Epilog  Legend 36EXT Laser

Raster engraving

2008 Giorgos Nikoleris 15

Page 16: Using the  Epilog  Legend 36EXT Laser

Piece size

2008 Giorgos Nikoleris 16

Page 17: Using the  Epilog  Legend 36EXT Laser

Top-down and bottom-up engraving

2008 Giorgos Nikoleris 17

Page 18: Using the  Epilog  Legend 36EXT Laser

Center Engraving

2008 Giorgos Nikoleris 18

Page 19: Using the  Epilog  Legend 36EXT Laser

Center Engraving

2008 Giorgos Nikoleris 19

Page 20: Using the  Epilog  Legend 36EXT Laser

Image Dithering

2008 Giorgos Nikoleris 20

Clipart Modes: Standard, Brighten and Low Res

Photograph Modes: Floyd Steinberg, Jarvis and Stucki

Page 21: Using the  Epilog  Legend 36EXT Laser

Image Dithering

2008 Giorgos Nikoleris 21

Page 22: Using the  Epilog  Legend 36EXT Laser

Vector Cut Settings

2008 Giorgos Nikoleris 22

Page 23: Using the  Epilog  Legend 36EXT Laser

Creating a Perforation using low Frequency

2008 Giorgos Nikoleris 23

Page 24: Using the  Epilog  Legend 36EXT Laser

Advanced Properties

2008 Giorgos Nikoleris 24

Page 25: Using the  Epilog  Legend 36EXT Laser

3D mode

2008 Giorgos Nikoleris 25

Page 26: Using the  Epilog  Legend 36EXT Laser

Stamp Settings

2008 Giorgos Nikoleris 26

Page 27: Using the  Epilog  Legend 36EXT Laser

Color Mapping

2008 Giorgos Nikoleris 27

Page 28: Using the  Epilog  Legend 36EXT Laser

Multiple passes

2008 Giorgos Nikoleris 28

Page 29: Using the  Epilog  Legend 36EXT Laser

The Operator Panel

2008 Giorgos Nikoleris 29

Page 30: Using the  Epilog  Legend 36EXT Laser

Air assist

2008 Giorgos Nikoleris 30

Cone style air assist

Page 31: Using the  Epilog  Legend 36EXT Laser

Lifting the table

2008 Giorgos Nikoleris 31

Page 32: Using the  Epilog  Legend 36EXT Laser

The Rotary Option

2008 Giorgos Nikoleris 32

Page 33: Using the  Epilog  Legend 36EXT Laser

Leveling the surface

2008 Giorgos Nikoleris 33

Page 34: Using the  Epilog  Legend 36EXT Laser

Pin Table

2008 Giorgos Nikoleris 34

Page 35: Using the  Epilog  Legend 36EXT Laser

Advanced Combined Work

2008 Giorgos Nikoleris 35

Page 36: Using the  Epilog  Legend 36EXT Laser

2008 Giorgos Nikoleris 36

Page 37: Using the  Epilog  Legend 36EXT Laser

Safety Rules

2008 Giorgos Nikoleris 37

• NEVER let the laser system operate if it will be unattended.• KEEP the area around the machine clean and free of

clutter, combustible materials, explosives, or volatile solvents such as acetone, alcohol, or gasoline.

• ALWAYS keep a properly maintained and inspected fire extinguisher on hand.

• ALWAYS use air assist when vector cutting.• BE CAREFUL! when vector cutting. Many materials have

the potential to burst suddenly into flames – even materials that may be very familiar to the user. Always monitor the machine when it is operating.

• KEEP YOUR LASER SYSTEM CLEAN – A build up of cutting and engraving reside and debris is dangerous and can create a fire hazard in its own right. Keep your laser system clean and free of debris. Regularly remove the vector grid to clean any small pieces that have fallen through the grid.

Page 38: Using the  Epilog  Legend 36EXT Laser

Acrylic - Tips & Tricks • In principle it is very easy to cut acrylic. Generally speaking, the maximum laser output is set

and the speed is adjusted so that the material is cut through. High-quality cutting results, however, can only be achieved with carefully selected parameters. At slow speeds, the cut edges achieved are rather more polished. However, if cutting is too slow, the resulting cut is wide and extends outwards towards the bottom. However, this also depends on the point of focus and the focal length used. Use a focal length of 2.5 inch for thicknesses between 3 and 8 mm, for thicker materials the focal length set should be 5 inch. The focus should not lie on the surface but approximately a third of the way inside the material. Striation increases with speeds that are too high. The gas flow should be set as low as possible to achieve the best possible quality. However, a higher gas flow allows faster cutting speeds.

• The acrylic used is also very important. Acrylic may be cast or extruded. Cast acrylic is excellently suited to laser cutting. With extruded acrylic, the cut edges become milky after cutting due to the stresses released. It is also important to achieve clean adjustment of the beam since the cut edges are not vertical if there is any astigmatism and exhibit different angles depending on the direction of displacement. Therefore, the selection of a laser source with good beam quality is particularly crucial.

• Also, it is particularly important to prevent reflections of the laser beam as far as possible since they cause visible unevenness in the cut edges. For this reason, the material may not lie completely flat on the processing surface. Use a special cutting table for this purpose. As a result the beam will barely be reflected and you will get clean-cut edges.

• It is also important to remove the protective film prior to processing.• Caution: Never operate the laser without supervision as acrylic tends to burn and create flames!

2008 Giorgos Nikoleris 38


Recommended