uTrace03Product Description

uTrace03 Product Charateristics

• Telematics device with GPS navigation and GSM/GPRS communication• Complete stand alone design, dimensions: 55 x 90 x 10 mm• Reliable GPS performance, high sensitivity -156 dBm (navigation)

• Quadband GSM/GPRS modem for world wide coverage• On-board GPS and GSM antennas

• Battery powered operation with minimum setup• Controlled by the GPS core processor – no need for extra CPU

• HW assembly options for optimum BOM/cost• Very low power consumption, Sleep mode <20µA @ 3.8 VDC• Wide temperature range - GPS: -40°C - +85 °C, GSM: -30°C - +75 °C

• Easily extendable in HW through the system connector• Easily extendable in SW using iSuite3 SDK + uTrace Toolkit

uTrace03 block diagram

uTrace03 Platform

uTrace Development Platform

uTrace Toolkit

A-GPS

uTrace Toolkit

uTrace application

GeoDB

GSM/GPRS Communications

Geofencing

uTrace Development Board

uTrace Evaluation Kit

uTrace Evaluation Platform

GSM phone

(SMS, audio)

GSM / GPRS

Fastrax Demo Server

( Internet Protocols )

uTrace03 connectivity

- Asset&Fleet Tracking&Control- Emergency applications

- M2M Remote monitoring & control- Anti-theft and retrieval

- Transport and Logistics- Security and Surveillance

GSM Operator

SMS gateway

GPRS gateway

SMS

GPRS

GSM voice callPhone #

UDP/TCP socket,FTP / HTTP

voice call

uTrace03

SMS

BACK OFFICE APPLICATIONS

DATABASE

uTrace03 software features

GSM/GPRS communication� GSM: SMS and audio� GPRS: Internet protocols UDP/TCP, FTP, HTTP

GeoDB library� Store POI and routes to non-volatile embedded database

for geofencing and routing

Geofencing library� Based on points/routes stored into GeoDB� Circular, path and polygon type geofencing with

”advanced 4D features”

Event handlers� Configurable actions:

• SMS• IO state change• Voice and data calls• Log event

� For events:• Low battery alarm• Vibration detection (shock sensor)• Movement start/stop detection (with shock

sensor support)• Geofence breach• GPS antenna failure

UI LEDs� GPS status� GSM status� Charging/battery state

Buttons� On/off button� 2 Generic buttons

Scheduler� Operation profile

• report interval• GSM update interval• GPS update interval (shield, hot-start

capability)• GSM power save mode • wakeup schedule & event

� Shock sensor

Advanced logging system� Event based logging (time, coordinates, ...)� Storage space for thousands of points� Advanced filtering (heading and velocity change)� Log export e.g. in kml –format => Google Earth

Safety features� Contacts Book support for

authorization/identification/user access levels.� SIM card switch detection� GPS antenna monitoring� Data encryption (AES 128) *

Localization� Language options for commands/reports� Unicode support

Remote configurability� Configuration file download� Firmware update (SPI flash or host processor

recommended) � Point and event log upload