+ All Categories
Home > Documents > UXM GSM/GPRS/EGPRS Application Feature Comparison

UXM GSM/GPRS/EGPRS Application Feature Comparison

Date post: 03-Oct-2021
Category:
Upload: others
View: 3 times
Download: 0 times
Share this document with a friend
4
Find us at www.keysight.com Page 1 UXM GSM/GPRS/EGPRS Application Feature Comparison June 2021 For more information on the options, part numbers, configuring your UXM instrument, upgrades, and licenses, view the Keysight UXM Wireless Test Set Configuration Guide, literature number 5991-4078EN. GSM/GPRS/EGPRS fundamentals E7521A test application First available in revision Fast switch with TD-SCDMA and W-CDMA 1 Yes 1.6.1.0 Supported cells = 1 Yes 1.6.1.0 3GPP frequency bands GSM450, GSM480, GSM750, GSM850, PGSM, EGSM, RGSM, TGSM810, DCS, PCS Yes 1.6.1.0 Cell power Yes 1.6.1.0 MS Tx level Yes 1.6.1.0 Multislot class 10 (4 DL, 2 UL, maximum 5 timeslots) Yes 1.6.1.0 Downlink corruption Yes 1.6.1.0 Trigger output on frame, hyperframe, multiframe Yes 1.6.1.0 Dual device parallel RF test in one UXM 2 Yes 1.6.1.0 Dual IP device test in one UXM (e.g. dual-SIM) 2 E7515A-D01, E7521A-FFP-0P1 1.6.1.0 Internal applications server E7515A-S01 1.6.1.0 Wireshark protocol logging and analysis E7515A-L01 1.6.1.0 1. Requires E7529A TD-SCDMA/HSPA and E7523A W-CDMA/HSPA+ test application licenses. 2. Requires one UXM with two TRX sets.
Transcript
Page 1: UXM GSM/GPRS/EGPRS Application Feature Comparison

Find us at www.keysight.com Page 1

UXM GSM/GPRS/EGPRS Application Feature Comparison June 2021 For more information on the options, part numbers, configuring your UXM instrument, upgrades, and licenses, view the Keysight UXM Wireless Test Set Configuration Guide, literature number 5991-4078EN.

GSM/GPRS/EGPRS fundamentals E7521A test application

First available in revision

Fast switch with TD-SCDMA and W-CDMA 1 Yes 1.6.1.0

Supported cells = 1 Yes 1.6.1.0

3GPP frequency bands GSM450, GSM480, GSM750, GSM850, PGSM, EGSM, RGSM, TGSM810, DCS, PCS

Yes 1.6.1.0

Cell power Yes 1.6.1.0

MS Tx level Yes 1.6.1.0

Multislot class 10 (4 DL, 2 UL, maximum 5 timeslots) Yes 1.6.1.0

Downlink corruption Yes 1.6.1.0

Trigger output on frame, hyperframe, multiframe Yes 1.6.1.0

Dual device parallel RF test in one UXM 2 Yes 1.6.1.0

Dual IP device test in one UXM (e.g. dual-SIM) 2 E7515A-D01, E7521A-FFP-0P1

1.6.1.0

Internal applications server E7515A-S01 1.6.1.0

Wireshark protocol logging and analysis E7515A-L01 1.6.1.0

1. Requires E7529A TD-SCDMA/HSPA and E7523A W-CDMA/HSPA+ test application licenses. 2. Requires one UXM with two TRX sets.

Page 2: UXM GSM/GPRS/EGPRS Application Feature Comparison

Find us at www.keysight.com Page 2

GSM/GPRS/EGPRS data throughput E7521A test application First available in revision

PS data connections E7521A-FFP-0P1 1.6.1.0

Dual transfer mode (DTM) (CS voice + PS data) E7521A-FFP-0P1 1.6.1.0

One primary PDP context E7521A-FFP-0P1 1.6.1.0

IPv4 Yes 1.6.1.0

QoS parameters Yes 1.6.1.0

Data connection types (Auto, BLER, ETSI, SRB) Yes 1.6.1.0

DL and UL modulation coding schemes using GMSK and 8PSK (MCS1 to MCS9)

Yes 1.6.1.0

EGPRS incremental redundancy Yes 1.6.1.0

Evolved EDGE RTTI Yes 1.6.1.0

Data throughput monitor - IP E7521A-FFP-0P1 1.6.1.0

Data throughput monitor - OTA Yes 1.6.1.0

GSM/GPRS/EGPRS detailed network behavior E7521A test application First available in revision

CS voice page/release Yes 1.6.1.0

Calling party number Yes 1.6.1.0

Paging parameters Yes 1.6.1.0

SMS (MO, MT, cell broadcast) Yes 1.6.1.0

Cell ID parameters Yes 1.6.1.0

Cell parameters Yes 1.6.1.0

Timers and counters Yes 1.6.1.0

MS-reported information Yes 1.6.1.0

Call status results Yes 1.6.1.0

Configurable message replies Yes 1.6.1.0

Network identity and time zone (NITZ) Yes 1.6.1.0

MS registration, GPRS attach/detach Yes 1.6.1.0

PLMN and equivalent PLMN (ePLMN) Yes 1.6.1.0

Page 3: UXM GSM/GPRS/EGPRS Application Feature Comparison

Find us at www.keysight.com Page 3

GSM/GPRS/EGPRS voice and connectivity E7521A test application First available in revision

GSM voice connection Yes 1.6.1.0

GSM voice echo Yes 1.6.1.0

GSM voice loopback Yes 1.6.1.0

Authentication Yes 1.6.1.0

Encryption A5/1, A5/3, GEA-1, GEA-2, GEA-3 Yes 1.6.1.0

VAMOS type I, II Yes 1.6.1.0

FS, EFS, HS, AFS, AHS, WFS speech channels Yes 1.6.1.0

FACCH, repeated FACCH, repeated SACCH, SDCCH with combined BCH

Yes 1.6.1.0

Signaling-only connection Yes 1.6.1.0

Real-time FS and AFS (AMR) vocoder E7535A-MEUv1.070 1.7.1.0

GSM/GPRS/EGPRS Rx and Tx measurements E7521A test application First available in revision

Bad frame indication (BFI) (GSM) Yes 1.6.1.0

BER (GSM, GPRS, EGPRS SRB) Yes 1.6.1.0

BLER (GPRS, EGPRS, USF) Yes 1.6.1.0

Data throughput monitor Yes 1.6.1.0

EDGE EVM Yes 1.6.1.0

FER (GSM FACCH, repeated SACCH) Yes 1.6.1.0

GMSK phase and frequency error Yes 1.6.1.0

Output RF spectrum (GMSK, EDGE) Yes 1.6.1.0

Power vs. time (GMSK, EDGE) Yes 1.6.1.0

Transmit power Yes 1.6.1.0

Page 4: UXM GSM/GPRS/EGPRS Application Feature Comparison

Find us at www.keysight.com Page 4 This information is subject to change without notice. © Keysight Technologies, 2021, Published in USA, July 19, 2021, 3121-1245.EN

Learn more at: www.keysight.com For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus

W-CDMA/HSPA+ measurements 3GPP TS 34.121-1 E7523A test application

First available in revision

13.1 Phase error and frequency error Yes 1.6.1.0

13.3 Transmitter output power and burst timing Yes 1.6.1.0

13.4 Output RF spectrum (ORFS) Yes 1.6.1.0

13.9 ORFS for MS supporting the R-GSM or ER-GSM frequency band Yes 1.6.1.0

13.16.1 Frequency error and phase error in GPRS multislot configuration Yes 1.6.1.0

13.16.2 Transmitter output power in GPRS multislot configuration Yes 1.6.1.0

13.16.3 ORFS in GPRS multislot configuration Yes 1.6.1.0

13.17.1 Frequency error and modulation accuracy in EGPRS configuration Yes 1.6.1.0

13.17.3 EGPRS transmitter output power Yes 1.6.1.0

13.17.4 ORFS in EGPRS configuration Yes 1.6.1.0

14.1 Bad frame indication Partially 1 1.6.1.0

14.2 Reference sensitivity Partially 1 1.6.1.0

14.3 Usable receiver input level range Partially 1 1.6.1.0

14.16.1 Minimum input level for reference performance (GPRS) Partially 1 1.6.1.0

14.18.1 Minimum input level for reference performance (EGPRS) Partially 1 1.6.1.0

14.18.6 EGPRS usable receiver input level range Partially 1 1.6.1.0

1. Supported under static conditions.

For more information on the options, part numbers, configuring your UXM instrument, upgrades and licenses, view the Keysight UXM Wireless Test Set Configuration Guide, literature number 5991-4078EN.

www.keysight.com/find/uxm

www.keysight.com/find/e7515a


Recommended