Find us at www.keysight.com Page 1
UXM W-CDMA/HSPA+ Application Feature Comparison June 2021 For more information on the options, part numbers, configuring your UXM instrument, upgrades, and licenses view the Keysight UXM Wireless Test Set Configuration Guide, literature number 5991-4078EN.
Note: The latest MEU license is available via the E7535A-MEU Minor Enhancement Update and applies to all formats installed on the test set.
Find us at www.keysight.com Page 2
W-CDMA/HSPA+ fundamentals E7523A test application E7623A A.01 First available in revision
Fast switch with TD-SCDMA and GSM 1 Yes Yes 1.6.1.0
Supported cells = 1 Yes Yes 1.4.1.0
FDD test mode (non-signaling mode) Yes Yes 1.4.1.0
RB test mode Yes Yes 1.4.1.0
PS data connections E7523A-FFP-0P1 Yes 1.4.1.02
CW mode E7535A-MEUv1.060 E7535A-MEUv1.060
1.6.1.0
HSDPA MIMO (one carrier with 16QAM or 64QAM) 3
E7523A-AFP Yes 1.4.1.0
3GPP frequency bands 1-14, 19-21 Yes Yes 1.4.1.0
3GPP frequency bands 25 and 26 E7535A-MEUv1.060 E7535A-MEUv1.060
1.6.1.0
Cell power Yes Yes 1.4.1.0
UE target power Yes Yes 1.4.1.0
Closed-loop power control Yes Yes 1.4.1.0
Channelization codes and relative levels Yes Yes 1.4.1.0
Dual device parallel RF test in one UXM4 Yes Yes 1.6.1.0
Dual IP device test in one UXM (e.g. dual-SIM) 4
E7515A-D01, E7523A-FFP-0P1
E7515A-D01 1.6.1.0
Internal applications server E7515A-S01 E7515A-S01 1.4.1.0
Channel emulation (fading) E7515A-C01 E7515A-C01 1.4.1.0
Moving and birth-death 3GPP fading profiles
E7515A-C01 E7515A-C01 1.6.1.0
Wireshark protocol logging and analysis E7515A-L01 E7515A-L01 1.4.1.0
HiSLIP interface for SCPI control Yes Yes 1.6.1.0
1. Requires E7529A and E7521A test application licenses. 2. First available in the E7523A at 1.5.1.0 3. Requires one UXM with one TRX set. 4. Requires one UXM with two TRX sets.
Find us at www.keysight.com Page 3
W-CDMA/HSPA+ data throughput and multiple carriers
E7523A test application E7623A A.01 First available in revision
DL QPSK, 16QAM, 64QAM Yes Yes 1.4.1.0
UL QPSK, 16QAM Yes Yes 1.4.1.0
DL up to 42 Mbps test modes Yes Yes 1.4.1.0
DL up to 42 Mbps end-to-end data E7523A-FFP-0P1 Yes 1.4.1.0 1
UL up to 11.5 Mbps test modes Yes Yes 1.4.1.0
UL up to 11.5 Mbps end-to-end data E7523A-FFP-0P1 Yes 1.4.1.0 1
HS-DSCH cat 1-24 test modes Yes Yes 1.4.1.0
HS-DSCH cat 1-24 end-to-end data E7523A-FFP-0P1 Yes 1.4.1.0 1
E-DCH cat 1-7 test modes Yes Yes 1.4.1.0
E-DCH cat 1-7 end-to-end data E7523A-FFP-0P1 Yes 1.4.1.0 1
DC-HSDPA test modes 2 Yes Yes 1.4.1.0
DC-HSDPA end-to-end data 2 E7523A-FFP-0P1 Yes 1.4.1.0 1
DB-DC-HSDPA test modes 3 Yes Yes 1.4.1.0
DB-DC-HSDPA end-to-end data 3 E7523A-FFP-0P1 Yes 1.4.1.0 1
HSDPA MIMO test modes 2 E7523A-AFP Yes 1.4.1.0
HSDPA MIMO end-to-end data 2 E7523A-AFP, E7523A-FFP-0P1
Yes 1.4.1.0 1
Data throughput monitor – IP E7523A-FFP-0P1 Yes 1.4.1.0 1
Data throughput monitor - OTA Yes Yes 1.4.1.0
HSPA throughput results (not graphical) Yes Yes 1.4.1.0
Maximum throughput preset call configurations
Yes Yes 1.4.1.0
1. First available in the E7523A at 1.5.1.0. 2. Requires one UXM with one TRX set. 3. Requires one UXM with two TRX sets.
Find us at www.keysight.com Page 4
W-CDMA/HSPA+ detailed network behavior E7523A test application E7623A A.01 First available in revision
CS voice page/release Yes Yes 1.4.1.0
Calling party number Yes Yes 1.4.1.0 1
Paging parameters Yes Yes 1.4.1.0
SMS (MO, MT, cell broadcast) Yes Yes 1.4.1.0
SMS http interface E7535A-MEUv1.070 E7535A-MEUv1.070
1.7.1.0
Reference measurement channels (RMC) Yes Yes 1.4.1.0
Fixed reference channels (FRC) Yes Yes 1.4.1.0
User-defined DL configuration Yes Yes 1.4.1.0
DL configuration based on CQI value E7523A-FFP-0P1 Yes 1.4.1.0 1
DL configuration based on UE reports (CQI) E7523A-FFP-0P1 Yes 1.4.1.0 1
Cell ID parameters (MCC, MNC, LAC, RAC, cell ID)
Yes Yes 1.4.1.0
Cell reselection parameters Yes Yes 1.4.1.0 1
Cell access restriction parameters Yes Yes 1.4.1.0 1
UE timers and constants Yes Yes 1.4.1.0 1
PRACH and uplink parameters Yes Yes 1.4.1.0
BCCH call setup parameters Yes Yes 1.4.1.0
USIM preset and user-defined configurations Yes Yes 1.4.1.0
UE-reported information Yes Yes 1.4.1.0
Call status results Yes Yes 1.4.1.0
RB test mode CELL_FACH Yes Yes 1.4.1.0
RRC state transitions (manual, automatic) E7523A-FFP-0P1 Yes 1.4.1.0 1
RRC states (IDLE, CELL_FACH, CELL_PCH, URA_PCH)
E7523A-FFP-0P1 Yes 1.4.1.0 1
Fast dormancy E7523A-FFP-0P1 Yes 1.4.1.0 1
Continuous packet connectivity (UE DRX/DTX, HS-SCCH less)
E7523A-FFP-0P1 Yes 1.4.1.0 1
Continuous packet connectivity (CPC) statistical results
E7523A-FFP-0P1 Yes 1.4.1.0 1
Find us at www.keysight.com Page 5
Configurable message reply Yes Yes 1.4.1.0 1
Network identity and time zone (NITZ) Yes Yes 1.4.1.0 1
eFlag E7535A-MEUv1.060 E7535A-MEUv1.060
1.6.1.0
1. First available in the E7523A at 1.5.1.0.
W-CDMA/HSPA+ voice and connectivity E7523A test application E7623A A.01 First available in revision
CS voice connection Yes Yes 1.4.1.0
CS voice echo Yes Yes 1.4.1.0
CS voice loopback Yes Yes 1.4.1.0
PS data connection E7523A-FFP-0P1 Yes 1.4.1.0 1
Simultaneous services (CS voice + PS data)
E7523A-FFP-0P1 Yes 1.4.1.0 1
Two primary PDP contexts E7523A-FFP-0P1 Yes 1.4.1.0 1
IPv4 Yes Yes 1.4.1.0 1
IPv6 Yes Yes 1.4.1.0 1
IPv4v6 Yes Yes 1.4.1.0 1
Authentication and integrity Yes Yes 1.4.1.0
Encryption UEA-1 Yes Yes 1.4.1.0 1
Additional WB-AMR rates (12.65k, 15.85k, 18.25k, 23.85k)
E7535A-MEUv1.060 E7535A-MEUv1.060 1.6.1.0
Real-time AMR vocoder E7535A-MEUv1.070 E7535A-MEUv1.070 1.7.1.0
1. First available in the E7523A at 1.5.1.0.
Find us at www.keysight.com Page 6
W-CDMA/HSPA+ interRAT mobility E7523A test application E7623A A.01 First available in revision
Physical channel reconfiguration (PCR) Yes Yes 1.4.1.0
Transport channel reconfiguration (TCR) Yes Yes 1.4.1.0
Radio bearer reconfiguration (RBR) Yes Yes 1.4.1.0
Cell reselection with LTE 1, 2 Yes Yes 1.4.1.0
Cell reselection with LTE, with PDP active 1, 3 E7523A-FFP-0H1, E7523A-FFP-0P1
Yes 1.4.1.0 5
Cell reselection with GSM, TD-SCDMA 1, 2 Yes Yes 1.6.1.0
Release with redirect to LTE 1, 3 E7523A-FFP-0H1 Yes 1.4.1.0 5
PS-HO LTE > UTRA 1, 3 E7523A-FFP-0H1, E7523A-FFP-0P1
Yes 1.4.1.0 5
PS-HO UTRA > LTE 1, 3 E7523A-FFP-0H1, E7523A-FFP-0P1
Yes 1.6.1.0
SRVCC–from-LTE 1, 3, 4 E7523A-FFP-0H1 Yes 1.4.1.0 5
CSFB-from-LTE 1, 3 E7523A-FFP-0H1 Yes 1.4.1.0 5
CSFB parameters Yes Yes 1.4.1.0 5
Compressed mode Yes Yes 1.4.1.0 5
Compressed mode parameters Yes Yes 1.4.1.0 5
UE-reported measurements Yes Yes 1.4.1.0
FACH measurement occasions (FMO) Yes Yes 1.4.1.0 5
SIB11 parameters Yes Yes 1.4.1.0
UTRA intra-frequency neighbor cells Yes Yes 1.4.1.0
UTRA inter-frequency neighbor cells Yes Yes 1.4.1.0
GERAN neighbor cells Yes Yes 1.4.1.0
SIB19 parameters Yes Yes 1.4.1.0 5
E-UTRA neighbor cells Yes Yes 1.4.1.0
1. Requires one UXM with two TRX sets, or two UXMs, Main with two TRX sets and Auxiliary with at least one TRX set,
plus interconnectivity kit E7515A-AC1. For full details see Keysight UXM Wireless Test Set Configuration Guide, literature number 5991-4078EN.
2. Requires E7530A LTE/LTE-A, E7523A W-CDMA/HSPA+, and/or E7529A TD-SCDMA/HSPA test application(s). 3. Requires E7530A LTE/LTE-A test application with E7530A-FFP-0H1 (and E7530A-FFP-0P1 for LTE IP data). 4. Requires Keysight E6966B IMS-SIP server and/or client. 5. First available in the E7523A at 1.5.1.0.
Find us at www.keysight.com Page 7
W-CDMA/HSPA+ Rx and Tx measurements
E7523A test application E7623A A.01 First available in revision
ACP Yes Yes 1.4.1.0
Block error ratio (BLER) Channel power
Yes Yes 1.4.1.0
ACP Yes Yes 1.4.1.0
Code domain Yes Yes 1.4.1.0
Data throughput monitor (TPut) Yes Yes 1.4.1.0 1
HSDPA block error ratio (HBLER) Yes Yes 1.4.1.0
Inner loop power E7535A-MEUv1.060 E7535A-MEUv1.060 1.6.1.0
IQ waveform Yes Yes 1.4.1.0
Loopback bit error ratio (LBER) Yes Yes 1.4.1.0
Mod accuracy Yes Yes 1.4.1.0
Monitor spectrum Yes Yes 1.4.1.0
Occupied BW Yes Yes 1.4.1.0
Power control Yes Yes 1.4.1.0
Power stat CCDF Yes Yes 1.4.1.0
QPSK EVM Yes Yes 1.4.1.0
Spectrum emission mask Yes Yes 1.4.1.0
1. First available in the E7523A at 1.5.1.0.
Find us at www.keysight.com Page 8
W-CDMA/HSPA+ measurements 3GPP TS 34.121-1 E7523A test application
E7623A A.01 First available in revision
5.2/A/AA/B Maximum output power Yes Yes 1.4.1.0
5.3 Frequency error Yes Yes 1.4.1.0
5.4.1 Open loop power control in the uplink Yes Yes 1.4.1.0
5.4.2 Inner loop power control in the uplink E7535A-MEUv1.060
E7535A-MEUv1.060
1.6.1.0
5.4.3 Minimum output power Yes Yes 1.4.1.0
5.5.1 Transmit off power Yes Yes 1.4.1.0
5.5.2 Transmit on/off time mask Yes Yes 1.4.1.0
5.7A HS-DPCCH power control Yes Yes 1.4.1.0
5.8 Occupied bandwidth (OBW) Yes Yes 1.4.1.0
5.9/A/B Spectrum emissions mask Yes Yes 1.4.1.0
5.10/A/B Adjacent channel leakage power (ALCR) Yes Yes 1.4.1.0
5.11 Spurious emissions1 Yes Yes 1.4.1.0
5.12 Transmit intermodulation 1,3 Yes Yes 1.4.1.0
5.13.1/A/AA/AAA Error vector magnitude (EVM) Yes Yes 1.4.1.0
5.13.2/A/B/C Peak/Relative code domain error Yes Yes 1.4.1.0
5.13.4 PRACH preamble quality Yes Yes 1.4.1.0
6.2/A/B Reference sensitivity level Yes Yes 1.4.1.0
6.3/A/B/C/D/E/F Maximum input level Yes Yes 1.4.1.0
6.4/A/B/C Adjacent channel selectivity 2 Yes Yes 1.4.1.0
6.5/A/B Blocking characteristics 2 Yes Yes 1.4.1.0
6.6/A/B Spurious response 3 Yes Yes 1.4.1.0
6.7/A/B Intermodulation characteristics 2 Yes Yes 1.4.1.0
6.8 Spurious emissions 1 Yes Yes 1.4.1.0
7.2.1 Demodulation of DCH in static conditions Yes Yes 1.4.1.0
1. Requires external signal analyzer. 2. Requires external signal generator. 3. Use cell 2 for CW interferer
Find us at www.keysight.com Page 9 This information is subject to change without notice. © Keysight Technologies, 2021, Published in USA, July 19, 2021, 3121-1244.EN
Learn more at: www.keysight.com For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus
W-CDMA/HSPA+ measurements 3GPP TS 34.121-1 E7523A test application
E7623A A.01 First available in revision
7.3.1 Demodulation of DCH in multi-path conditions E7515A-C01 E7515A-C01 1.4.1.0
7.4.1 Demodulation of DCH in moving conditions E7515A-C01 E7515A-C01 1.6.1.0
7.5.1 Demodulation of DCH in birth-death conditions E7515A-C01 E7515A-C01 1.6.1.0
7.5.1A Demodulation of DCH in high-speed train conditions E7515A-C01 E7515A-C01 1.4.1.0
34.121 Preset link configurations Yes Yes 1.4.1.0
1. Requires external signal analyzer. 2. Requires external signal generator. 3. Use cell 2 for CW interferer
For more information on the options, part numbers, configuring your UXM instrument, upgrades and licenses, view the Keysight UXM Wireless Test Set Configuration Guide, literature number 5991-4078EN.
www.keysight.com/find/uxm
www.keysight.com/find/e7515a
