‘V’ GROOVE “MITER FOLD“ #RC-1028 PAGE 132 - … CNC ROUTER BITS CNC Router Bits Wood...

‘V’ GROOVE “MITER FOLD“#RC-1028 PAGE 132

126

CNC

ROUT

ER B

ITS

CNCRouter Bits

Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size.

d

L

B

DR

CORE BOX2 FLUTE

Cut half-round grooves for fluted moldings, columns,millwork, and signs using a core box bit. Used withan edge guide, it can cut coves. Can be used withhandheld, table-mounted and CNC routers.

�WARNING: These tools have an open flute design (not anti-kickback) and are intended for high feed-rate CNC machine use only.Do not use in portable routers.

45944-CNC

45946-CNC

45948-CNC

STRAIGHT PLUNGEOPEN FLUTE3/4" SHANK2 FLUTE

L

B

D

d

R/H L/H

For high-volume production work with a CNC router, use one of theseplunge-cutting straights. Long, 3/4" shanks extend the bit’s reach,enhancing its versatility. Open-flute design promotes rapid chipclearance, necessary for high feed rates. Available in both right-handconfiguration (for standard clockwise rotation) and left-hand configuration(for counter-clockwise rotation “Topmaster” machines.)

d

L

B

D

Mill broad surfaces with any of these large-diameter,plunge-cutting bits. The open flute design providesexcellent chip clearance, essential for the high feedrates characteristic of CNC routers.

STRAIGHT PLUNGEOPEN FLUTE1/2" AND 3/4" SHANK2 FLUTE

ØD R B Tool No. Ød L Max. RPM1-1/4 5/8 1-1/4 �45944-CNC 1/2 2-3/4 18,0001-1/2 3/4 1-1/4 �45946-CNC 1/2 2-3/4 18,000

2 1 1-1/4 �45948-CNC 1/2 2-3/4 18,000

ØD B Tool No. Ød L1-1/4 1-1/4 45450-CNC 1/2 2-7/81-1/2 1-1/4 45452-CNC 1/2 2-7/81-3/4 1-1/4 45453-CNC 1/2 2-7/8

2 1-1/4 45480-CNC 3/4 3-1/2

Spiral & PLUNGE Miter Fold & Chamfering Rabbeting Door Jointing Grooving Planing &Compression Signmaking & Profiling Making Hogging

ØD B Tool No. Tool No. Ød L3/4 2 45455 45454 3/4 53/4 2-1/2 45456 45457 3/4 4-1/23/4 1-1/4 45458 –– 3/4 3-1/4

NOTE: Chipbreaker option (special order): Designed to cut chipboard and MDF at high automatic feed rates found on CNC machines.

Each flute is ground so that the chipbreakers are staggered to each other, giving a straight cut. To order, add ‘CB’ suffix (ie: #45454-CB).

R/H L/H

127

CNC ROUTER BITSCNCRouter Bits

Wood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size.

d

R

L

B

DD1

B1

ROUND OVER2 FLUTE

This bit creates a flat-bottom groove between twoquarter-round shapes. Short vertical walls extendingbelow the radius lend extra depth to the appearance.Depending upon the cut depth adjustment, the radiican be flush with the work surface or recessed. Theprofile can be formed on an edge using an edgeguide or on the router table using a fence.

‘V’ GROOVE2 FLUTE

Cut decorative ‘V’ grooves and lettering on signs withthese ‘V’ Groove bits. Use with an edge guide tochamfer and bevel edges. Can be used with handheld,table-mounted and CNC routers.

! WARNING: Maximum RPM = 14,000; = 18,00014 18

�WARNING: These tools have an open flute design (not anti-kickback) and are intended for high feed-rate CNC machine use only.Do Not use in portable routers.

BALL END INSERTROUTER BIT

Cut channels for pipes or cables using the ball end bit. Theprofile requires the cut to be made in a single pass. To reducestress on the bit, cut an initial groove using a straight bitmatching the D1 dimension of the ball end bit.

d

L

R

DD1

B

ØD ØD1 R Tool No. B B1 Ød L1-3/8 23/64 1/2 �49706-CNC 1 3/4 1/2 2-1/21-3/4 1/2 5/8 �49708-CNC 1-1/4 1 1/2 2-3/4

2 1/2 3/4 �49710-CNC 1-7/16 1-1/8 1/2 2-15/16�WARNING: These tools have an open flute design (not anti-kickback) and are intended for high feed-rate CNC machine use only.Do not use in portable routers.

B

a°D

L

d

B1

ØD a° B Tool No. B1 Ød L1-1/4 90° 3/4 �45726-CNC 5/8 1/2 2-1/21-1/2 90° 1 �45728-CNC 3/4 1/2 2-3/4

2 90° 1-3/4 �45732-CNC 1 1/2 3-1/4

NOTE: 90° ‘V’ Groove bits are for decorative purposes and are not intended for ‘miter-folding’, etc.

ØD ØD1 B Flutes R Tool No. Ød L Screw# Repl. T.C. Knife1/2 13/32 1/4 1 1/4 RC-1120 1/2 2-5/8 67112 RCK-515/8 13/32 5/16 1 5/16 RC-1122 1/2 2-3/4 67112 RCK-523/4 19/32 3/8 2 3/8 RC-1124 1/2 2-5/8 67112 RCK-531 43/64 1 2 1/2 RC-1126 1/2 2-7/8 67115 RCK-54

45726-CNC

49706-CNC

49708-CNC

49710-CNC

45728-CNC

45732-CNC

RC-1120

RC-1122

RC-1124

RC-1126

!18

!18

!18

!14

!14

!14

Spiral & PLUNGE Miter Fold & Chamfering Rabbeting Door Jointing Grooving Planing &Compression Signmaking & Profiling Making Hogging

ALSO FOR USEIN

ROUTER TABLE

128

CNC

ROUT

ER B

ITS

Spiral & STRAIGHT Miter Fold & Chamfering Rabbeting Door Jointing Grooving Planing &Compression PLUNGE Signmaking & Profiling Making Hogging

CNCRouter Bits

For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.comWood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size.


ØD B Flutes Tool No. Ød L Repl. T.C. Knife5/8" 30(1-3/16") 2 RC-3204 3/4" 3-1/4" RCK-345/8" 50(2") 2 RC-3208 3/4" 4" RCK-363/4" 30(1-3/16") 2 RC-3260 3/4" 3-1/4" RCK-343/4" 50(2") 2 RC-3264 3/4" 4" RCK-363/4" 30(1-3/16") 3 RC-3300 3/4" 3-1/4" RCK-343/4" 50(2") 3 RC-3304 3/4" 4" RCK-363/4" 30(1-3/16") 3 RC-3305 5/8" 3-1/4" RCK-343/4" 50(2") 3 RC-3307 5/8" 4" RCK-36

B

L

D

d

Tested by many of the world’s largest furniture manufacturers,these new CNC router bits yield cuts which are cleaner thantypical insert bits. Unlike the other style of straight insert bitsthis category has a channel whereby the carbide is insertedand tightened. This tool is specifically suited for peripheralwork. Available with double and triple flutes.

INSERT STRAIGHT ROUTER BIT2 FLUTE & 3 FLUTE

INSERT STRAIGHT ROUTER BITSINGLE & DOUBLE FLUTEThis group of router bits are not designed to plunge.Using the “ramping technique” the router is eased in androutes. Available in three different grades of carbide forvarious applications.

ØD B Flutes Tool No. Ød L Repl. T.C. Knife1/2" 30(1-3/16") 1 RC-2154 3/4" 3-1/4" AMA-305/8" 30(1-3/16") 1 RC-2156 3/4" 3-3/8" RCK-305/8" 50(2") 1 RC-2158 3/4" 4-1/8" RCK-505/8" 30(1-3/16") 2 RC-2080 3/4" 3-3/8" AMA-305/8" 50(2") 2 *RC-2082 3/4" 4-1/8" AMA-303/4" 30(1-3/16") 1 RC-2160 3/4" 3-3/8" RCK-303/4" 50(2") 1 RC-2162 3/4" 4-1/8" RCK-503/4" 30(1-3/16") 2 RC-2084 3/4" 3-3/8" RCK-303/4" 50(2") 2 *RC-2086 3/4" 4-1/8" RCK-307/8" 30(1-3/16") 1 RC-2164 3/4" 3-3/8" RCK-307/8" 50(2") 1 RC-2166 3/4" 4-1/8" RCK-507/8" 30(1-3/16") 2 RC-2088 3/4" 3-3/8" RCK-307/8" 50(2") 2 *RC-2090 3/4" 4-1/8" RCK-30

NOTE: All above two flute router bits have two cutting edges per knife. *50mm cutting edge is achieved using two 30mm staggered knives.

d

B

L

D

!WARNING: Recommended RPM 14,000-18,000

!WARNING: Maximum RPM 18,000

Ramping Technique

129

CNC ROUTER BITSSpiral & STRAIGHT Miter Fold & Chamfering Rabbeting Door Jointing Grooving Planing &

Compression PLUNGE Signmaking & Profiling Making Hogging

CNCRouter Bits


INSERT SUPER PLUNGE ROUTER BITThis router bit is designed for fast and direct penetration intothe material and quick removal of wood, MDF, melamine andman-made material.

d

B

L

D

INSERT UP & DOWN SHEAR ROUTER BITInsert straight router bit complete with two up/down-shearflutes and center tip. Shear flutes squeeze the material into themiddle to give an extra fine finish on both surfaces of laminatedand veneered board. Replaceable inserts ensure a constantcutting diameter and finish quality. Center tip for improvedboring. For use on routers with CNC control.

d

B

L

D

INSERT STRAIGHT ROUTER BITWITH PLUNGE CENTER TIPThis router bit is designed for fast and direct penetrationinto the material and quick removal of wood, MDF,melamine and man-made material.

d

B

L

D

ØD B Ød L Teeth Tool No. Repl. T.C. Knife Repl. T.C. Knife Max. RPM40(1-1/2") 29.5(1-5/32") 3/4" 100(4") 2+2 RC-2180 RCK-30 AMA-12 18,00060(2-3/8") 29.5(1-5/32") 3/4" 100(4") 2+2 RC-2182 RCK-30 ICK-30 18,000

ØD B Ød L Tool No. Repl. T.C. Knife Repl. T.C. Knife Max. RPM5/8" 30(1-3/16") 1/2" 81(3-3/16") RC-2063 RCK-35 AMA-12 24,000

18(23/32") 30(1-3/16") 3/4" 105(4-1/8") RC-2060 RCK-160 RCK-30 18,00018(23/32") 50(2") 3/4" 125(5") RC-2062 RCK-162 RCK-50 18,00020(25/32") 30(1-3/16") 3/4" 105(4-1/8") RC-2061 RCK-160 RCK-30 18,000

ØD B Ød Tool No. L Repl. T.C. Knife Max. RPM20(25/32") 30(1-3/16") 3/4" RC-2300 110(4-11/32") RCK-16 18,00020(25/32") 50(2") 3/4" RC-2304 130(5-1/8") RCK-28 18,000

INSERT STAGGER-TOOTH ROUTER BIT

130

CNC

ROUT

ER B

ITS

CNCRouter Bits

For a complete replacement parts listing for the above tools please refer to our website: www.amanatool.comWood profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size.

Insert straight router bit complete with two flutes andmultiple cutting blades. Blades are sheared up anddown to ensure a good finish on both top and bottomsurfaces of laminated and veneered boards. For useon routers and machining centers with CNC control.

d

B

L

D

ØD B Ød Tool No. L Max. RPM # of knives Repl. T.C. Knife22(7/8") 42(1-11/16") 3/4" RC-4200 115(4-9/16") 18,000 4 AMA-12 22(7/8") 62(2-7/16") 3/4" RC-4204 135(5-5/16") 18,000 6 AMA-12

d

B

L

D

Insert straight router bit with multiple cutting flutes.Suitable for rough rabbeting and sizing in softwood,hardwood and man-made boards (with or withoutcoating). Multiple cutting flutes ensure fine chips areproduced for improved waste extraction. Replaceableinserts ensure a constant cutting diameter. For useon routers and machining centers with CNC control.

ØD B Ød Tool No. L Max. RPM # of knives Repl. T.C. Knife50(2") 56(2-13/64") 3/4" RC-2350 113(4-1/2") 18,000 10 AMA-12 50(2") 78(3-1/16") 3/4" RC-2354 135(5-5/16") 18,000 14 AMA-12

Spiral & Straight Miter Fold & Chamfering Rabbeting Door Jointing Grooving PLANING &Compression Plunge Signmaking & Profiling Making HOGGING



INSERT ROUGH RABBETING & SIZING ROUTER BIT

For solid carbidespiral & compressionbits see pages 9-11

RC-4204

2007Routing_CNC_StraightMiter125-135.qxd:Routing_Grooving.qxd 11/26/07 3:08 PM Page 130

131



INSERT STRAIGHT RABBETINGWITH SCORER 2+2 DESIGNInsert rabbeting router bit complete with two cutting flutesand scorer. Suitable for trimming and rabbeting in softwood,hardwood and man-made boards. Scorer will give animproved finish at the bottom of the cut. For use on routersand machining centers with CNC control.

d

B

L

D

INSERT SPOILBOARD SURFACING & RABBETINGWITH SCORER 2+2 DESIGNInsert spoilboard, planing and rabbeting router bit complete with two cutting flutes and two up-shear scorer will giveexcellent results in MDF, Balsa Core, hardwood, softwood andall man-made materials. A good tool for fast removal ofmaterials over a large surface area. The scorer will give animproved finish at the bottom of the cut.

d

B

L

D

ØD B Ød L Tool No. Max. RPM Repl. T.C. Knife Repl. T.C. Knife40(1-1/2") 30(1-3/16") 3/4" 100(4") RC-2380 18,000 RCK-30 RCK-7040(1-1/2") 50(2") 3/4" 120(4-3/4") RC-2381 18,000 RCK-50 RCK-7060(2-3/8") 30(1-3/16") 3/4" 100(4") RC-2382 18,000 RCK-30 RCK-7060(2-3/8") 50(2") 3/4" 120(4-3/4") RC-2383 18,000 RCK-50 RCK-70

ØD B Ød Tool No. L Max. RPM Repl. T.C. Knife80(3-1/8") 12(15/32") 3/4" RC-2252 90(3-1/2") 18,000 HMA-12, HCK-70

Spiral & Straight Miter Fold & Chamfering RABBETING Door Jointing Grooving Planing &Compression Plunge Signmaking & Profiling Making Hogging

To produce MDF Shaker cabinet doors use RC-2252 and square corners with 45200.

B

D

For Additional Knives see page 160.

132

CNC

ROUT

ER B

ITS


CNCRouter Bits


Design Your OwnCustom Profile10 pc. Minimum

SIGNMAKING, LETTERINGAND ENGRAVING2 FLUTEThe Most Versatile CNC Insert Tooling Systemfor Sign Making, Lettering & Engraving.

This Insert Engraving System features one toolbody with over 30 unique insert knives designedfor a variety of applications.

Industrial quality insert knives produce crisp, clean cuts andlast at least twice as long as comparable solid carbide bits.

The system was engineered to quickly interchange insertswhile mounted in CNC machines to eliminate down-time andto maintain consistent cutting accuracy.

Tool bodies are expertly balanced for virtually no vibrationto provide superior cutting results.

Ideal for cutting laminated materials, veneers, MDF, plastics,wood and solid surface. V-Tip inserts can also cut aluminum.

Tool No. Ød LRC-1075 1/4 2-1/2RC-1076 1/2 2-1/2

Replacement hex key #5004. Replacement screw #67127.

gold!AS GOOD AS

L

d

D1 D1

L

d

RC-1075 RC-1076

Insert knivessold separately.

V-TIP (a° = 30°) V-TIP (a° = 60°)

a° a° a°

Tool No. ØD1RCK-380 0.005" RCK-381 0.010"RCK-382 0.020"RCK-383 0.030"RCK-384 0.040"RCK-385 0.060"RCK-386 0.090"

Tool No. ØD1RCK-360 0.005" RCK-361 0.010"RCK-362 0.020"RCK-363 0.030"RCK-364 0.040"RCK-366 0.060"RCK-369 0.090"

V-TIP (a° = 90°)

Tool No. ØD1RCK-390 0.005" RCK-391 0.010"RCK-392 0.020"RCK-393 0.040"

Tool No. ØDia.RCK-400 1/8" RCK-402 3/16"RCK-404 1/4"RCK-406 5/16"

STRAIGHT BITS

Tool No. Radius ØDia.RCK-420 1/16" 1/8"RCK-422 3/32" 3/16"RCK-424 1/8" 1/4"RCK-426 5/32" 5/16"

CORE BOX

Tool No. Radius Small DRCK-410 1/16" 3mm (1/8") RCK-412 3/32" 3mm (1/8")RCK-414 1/8" 3mm (1/8")

CORNER ROUND

KNIVES FOR RC-1075 (G1853X04) AND RC-1076 (G1853X08)

www.amanatool.com/ingroove

CNC

ROUT

ER B

ITS

Spiral & Straight ”V” GROOVE Chamfering Rabbeting Door Jointing Grooving Planing &Compression Plunge & MITER FOLD & Profiling Making Hogging

CNCRouter Bits


Designed to miter fold MDF, melamineand wood to a perfect joint.

a˚= 91˚

33MAX.

d

B

L

D

L1

B1

aº1 aº

RC-1100RC-102891°

a°

B

D

d

L

L1

B1

a°1

RC-1104RC-1029120°

RC-1100RC-102891°

‘V’ GROOVE - “MITER FOLD” & SIGNMAKINGINSERT ROUTER BITSINGLE FLUTE & 2 FLUTE

!WARNING: Maximum RPM = 12,000; = 14,000; = 16,000; = 18,000; = 22,000 12 14

3/4" SHANK

1/2" SHANK

RC-1105

RC-1104

RC-1107

RC-1106

RC-1109

ALSO FOR USEIN

ROUTER TABLE

22.5°RC-1045

16 18 22

132A

!18

!18

!18

!18

!18

!12

!12

!12

Gen. Purpose MDF TorxØD a° a°1 B B1 Flutes Ød Tool No. L1 L Repl.T.C Knife Repl.T.C Knife Screw

1-5/8 60° 30° 1-3/8 1-5/8 1 3/4 RC-1032 2-7/8 4-5/8 RCK-131 RCK-358 671102-5/8 90° 45° 1-9/32 1-27/32 1 3/4 RC-1030 2-5/32 3-13/16 RCK-133 RCK-355 67110

3 90° 45° 1-1/2 27/64 1 3/4 RC-1034 2-23/64 4-23/64 RCK-138 RCK-359 671152-5/8 91° 45.5° 1-5/16 1-3/8 1 3/4 RC-1028 2-3/8 3-7/8 RCK-117 RCK-356 67110

3-13/32 120° 60° 31/32 1-31/32 2 3/4 RC-1029 2-3/8 3-27/32 RCK-112 RCK-357 671153-27/32 130° 60° 13/16 1-31/32 2 3/4 RC-1025 2-3/8 3-7/8 RCK-112 RCK-357 671153-25/32 150° 75° 1/2 1-31/32 2 3/4 RC-1027 2-3/8 3-1/2 RCK-112 RCK-357 67115

!18

!18

!18

!18

!18

!22

!22

!22

Gen. Purpose MDF TorxØD a° a°1 B B1 Flutes Ød Tool No. L1 L Repl.T.C Knife Repl.T.C Knife Screw

13/16 45° 22.5° 1 1- 1/16 1 1/2 RC-1045 1-3/8 2-3/8 RCK-56 RCK-350 6711727/32 46° 23° 63/64 1- 1/16 1 1/2 RC-1047 1-3/8 2-3/8 RCK-56 RCK-350 671177/8 50° 25° 31/32 1- 1/16 1 1/2 RC-1046 1-1/2 2-9/16 RCK-56 RCK-350 67117

1-1/32 60° 30° 29/32 1- 1/16 1 1/2 RC-1108 1-3/8 2-7/16 RCK-56 RCK-350 671171-7/32 70° 35° 7/8 1- 1/16 1 1/2 RC-1048 1-1/2 2-9/16 RCK-56 RCK-350 671171-1/2 90° 45° 3/4 1- 1/16 1 1/2 RC-1102 1- 25/32 3 RCK-134 RCK-351 671171-1/2 91° 45.5° 3/4 1- 1/16 1 1/2 RC-1100 1- 25/32 3 RCK-119 RCK-352 671151-5/8 100° 50° 11/16 1- 1/16 1 1/2 RC-1103 2 3-3/16 RCK-119 RCK-352 671171-3/4 110° 55° 5/8 1- 1/16 2 1/2 RC-1105 2 3-3/16 RCK-119 RCK-352 671172-1/32 120° 60° 9/16 1-5/32 2 1/2 RC-1104 2 3-1/16 RCK-136 RCK-353 671392-1/8 130° 65° 1/2 1-5/32 2 1/2 RC-1107 2 3 RCK-137 RCK-354 671152-1/4 150° 75° 19/64 1-5/32 2 1/2 RC-1106 2 2-15/16 RCK-137 RCK-354 671152-5/16 160° 80° 13/64 1-5/32 2 1/2 RC-1109 2 2-25/32 RCK-137 RCK-354 67115!14

!14

!18

!16

!22

133

1/4"

3/8"

3/16

"

29/32" 29/32"

13/

16"

3/4"

3/8"

RCK-215 RCK-216

D

d

L

BB1

C

R

D

d

RCK-211 RCK-212 RCK-213 RCK-214 RCK-217 RCK-218 RCK-219 RCK-221

OGEE FILLET CLASSICAL TRADITIONAL CONCAVE CONVEX

ØD B B1 R Tool No. Ød C L Max. RPM2-5/8 1-11/64 1/4 1/4 *RC-1130 1/2 3/8 3-1/8 18,000

CNC ROUTER BITSSpiral & Straight Miter Fold & Chamfering Rabbeting DOOR Jointing Grooving Planing &

Compression Plunge Signmaking & Profiling MAKING Hogging

CNCRouter Bits


d

B1

CD

L

B

d

B2

CD

L

B

INSERT STILE & RAIL WITH EASED EDGE SET1/2" DEEP TONGUE & GROOVEFOR 3/4" TO 1-5/16" MATERIAL

Our stile and rail sets give you two complete bits, onefor doing the rail cuts and one for the stiles. Makecabinet doors and all varieties of frame-and-panelassemblies for furniture and architectural applications.

OGEE*Set comes with Ogee Knives installed (RCK-215 & RCK-216)

ALSO FOR USEIN

ROUTER TABLE

Our stile and rail sets give you two complete bits, onefor doing the rail cuts and one for the stiles. Makecabinet doors and all varieties of frame-and-panelassemblies for furniture and architectural applications.

INSERT STILE & RAIL SETFOR 3/4" TO 1-3/16" MATERIAL

ALSO FOR USEIN

ROUTER TABLE

Additional knives sold separately.

ØD B B1 B2 Ød Tool No. C L Max. RPM Repl. T.C. Knife2-3/8" 1-3/16" 1/4" 5.5(7/32") 1/2" RC-1132 1/2" 2" 18,000 RCK-340 RCK-342

134

CNC

ROUT

ER B

ITS

Spiral & Straight Miter Fold & Chamfering Rabbeting DOOR Jointing Grooving Planing &Compression Plunge Signmaking & Profiling MAKING Hogging

CNCRouter Bits


INSERT RAISED PANEL2 FLUTE

ØD B Ød R Tool No. A L Repl. T.C. Knife3-3/8 51/64 1/2 – RC-4010 1-3/8 2-3/4 RCK-2243-3/8 3/4 1/2 7/8 RC-4012 1-3/8 2-3/4 RCK-2263-3/8 27/32 1/2 1-37/64 RC-4014 1-7/16 2-7/8 RCK-228

d

B

L

D

RR

A

BACK CUTTER (OPTIONAL)FOR ABOVE INSERT RAISED PANELS2 FLUTE

B

D

R

11/16"3/8"

1-1/4"

3/4"17/32"

31/64"

1-1/4"

23/32"

1-5/16"

3/16" 3/16"

15° 7/8" 1-37/64"

5°

6.95°RC-4010

All above Insert Raised panel bits include plug, ball bearing and retaining screw.

Insert Raised panel bits for CNC machine or router table. Bits include ballbearing & anti-dust plug. May also be used with optional back cutter below.Remove bearing for CNC work.

ØD B Tool No. R Repl. T.C. Knife2-1/8 23/64 RC-4102 5/16 RCK-232

RC-4014RC-4012

ALSO FOR USEIN

ROUTER TABLE

1-3/

16"

3/8"

1-3/

16"

3/8"

RCK-332

RCK-336

RCK-330

135




*Set includes RCK-330 & RCK-332

ADJUSTABLE INSERT MISSION TONGUE & GROOVE SETFOR 5/8" TO 1-3/16" MATERIAL

PATENT PENDING

d

BT

D

d

BT

L

D

AdjustingScrew

C

ALSO FOR USEIN

ROUTER TABLE

Adjust the panel groove width from 5.4mm - 6.6mm using theeasy to use adjustment knob - no shims necessary.

The perfect fix for undersized plywood flat panel “Mission Style, Arts & Crafts and Shaker” cabinet doors!Set includes unique adjustment system.

• Designed to cut precise grooves to provide undersized plywood veneered panels with a snug rattle free fit.

• Each set includes 2 pcs. (1 for stile cuts & 1 for rail cuts)

Optional Knives:

• For 5.5mm undersized 1/4" plywood.

• For 5.9mm oversized 1/4" veneered plywood.

(5.4mm - 6.0mm)

RCK-334

ØD B Ød C Tool No. T L Max. RPM2-3/8" 1-3/16" 1/2" 3/8" *RC-4022 6.1-6.6(1/4" + -) 2-15/16" 18,000

(6.1mm - 6.6mm)

136

CNC

ROUT

ER B

ITS

CNCRouter Bits

For a complete replacement parts listing for the above tools please refer to our website: www.amanatool.com3D renderings & tool illustrations not shown at actual size.

(Wood profiles not shown at actual size.)

INSERT MULTI PROFILE RAISED PANEL ROUTER BIT

TRIMMER BIT (OPTIONAL)

Insert profile router bit with two cutting flutes. Suitablefor producing various raised panel profiles in softwood,hardwood and man-made boards. Tool can be suppliedcomplete with a small trimmer for machining the edgeof the panel. One router will take all eight differentprofiles. For use on routers and machining centers withCNC control.

d

B

L

DD1

9.5 15

R3

R8

3647.5

18.

6

6.2

max

.8.5

12

1.8

1.9

45

2

47.5

5

max

. 13.

5

7R70

12 15

47.5

max

. 14

R3.5R3.5

9

9.8

12 1515

47.5

max

.14

1.8

6.7

1.6

3.6

5.1

8.2

R6

R30

12

1.8

1.9

45

2

47.5

5

max

. 13.

5

8.3

47.5

5.5 14m

ax.1

4

R70

47.5

11

12.4

max

.15

47.5

9.5

12.3

max

.15

18

R30

5.5

RCK-200 RCK-210 RCK-220 RCK-230

RCK-240 RCK-250 RCK-260 RCK-270

INSERT KNIVES FOR MULTI PROFILE RAISED PANEL ROUTER BITRC-4100

ØD ØD1 B Tool No. Ød L Max. RPM Repl. T.C. Knife112(4-7/16") 18(23/32") 28(1-1/8") RC-4000 3/4" 110(4-11/32") 12,000 RCK-200112(4-7/16") 18(23/32") 28(1-1/8") RC-4001 3/4" 110(4-11/32") 12,000 RCK-210112(4-7/16") 18(23/32") 28(1-1/8") RC-4002 3/4" 110(4-11/32") 12,000 RCK-220112(4-7/16") 18(23/32") 28(1-1/8") RC-4003 3/4" 110(4-11/32") 12,000 RCK-230112(4-7/16") 18(23/32") 28(1-1/8") RC-4004 3/4" 110(4-11/32") 12,000 RCK-240112(4-7/16") 18(23/32") 28(1-1/8") RC-4005 3/4" 110(4-11/32") 12,000 RCK-250112(4-7/16") 18(23/32") 28(1-1/8") RC-4006 3/4" 110(4-11/32") 12,000 RCK-260112(4-7/16") 18(23/32") 28(1-1/8") RC-4007 3/4" 110(4-11/32") 12,000 RCK-270

ØD1 B B1 Tool No. Ød L Repl. T.C. Knife18(23/32") 12(15/32") 18(23/32") RC-4100 8(5/16") 31(1-1/4") AMA-12


137



INSERT CABINET DOOR EDGE BITd

L

D

MULTI-FACE PROFILE (EDGE) FORM ROUTER BIT This innovative cutter is part of our patent pendingNova System (see pages 50-51). The hard, durablecarbide blades provide durability, even on abrasivesheet stock. And because the profiles areinterchangeable, you’ll only need to purchase one bit. Choose from a wide variety of popular profilesillustrated below.

NRC-A02

NRC-A03

NRC-A05

NRC-A08

NRC-A06

NRC-A09

NRC-A07

NRC-A10

NRC-A12

NRC-A16

NRC-A15

NRC-A18

NRC-A19

NRC-A17

NRC-A11

NRC-A14

NRC-A20NRC-A21

NRC-A23

NRC-A22

NRC-A01

NRC-A04

Includes both concave andconvex knife retainers.

Concave Convex

d

B

L

DL1

ØD B Ød Tool No. L L1 Max. RPM40(1-1/2") 17.5(11/16") 3/4" * RC-2470 110.5(4-3/8") 2.5(3/32)" 28,000

*NRC-A13 included.

27/64"

7/32"

3/8"

17/64"

5/16"

13/64"

5/16"

9/32"


RCK-252 RCK-258RCK-256RCK-254

ØD Ød Tool No. L1-1/2 1/2 * RC-2120 2-25/32

*RCK-252 included (2). Additional knife sets sold separately.

Cuts a decorative edge on door cabinet fronts. Shallow design will also work well with European hinges.

ALSO FOR USEIN

ROUTER TABLE

NRC-A13

138

CNC

ROUT

ERBI

TSCNCRouter Bits

For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.comMDF profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size.

MDF CABINET DOORS INSERT BITS

This series of profiles utilizing our patented Nova™ Tool bodysystem of interchangeable carbide insert knives (see pages50-51) are designed to give the appearance of a Raised Paneldoor in MDF or solid panels.

One pass is all that is needed for a simple raised panel lookusing one of the “Plunge Form” profiles.

Replacement knives are MDF Grade Carbide andwill last much longer than standard brazed carbide tipped bits.

RC-2480

RC-2484

RC-2483RC-2482RC-2481

RC-2486RC-2485

ØD D1 B Style Tool No. B1 Ød L Repl. T.C. Knife25/32 7/16 23/64 Bead RC-2480 3/16 1/2 2-5/8 RCK-48025/32 7/16 15/32 Ogee RC-2481 –– 1/2 2-5/8 RCK-48125/32 7/16 7/16 Ogee RC-2482 1/4 1/2 2-5/8 RCK-4821-3/8 15/32 25/64 Traditional RC-2483 –– 1/2 2-5/8 RCK-4831-7/64 7/16 1/4 Ogee RC-2484 7/64 1/2 2-5/8 RCK-4841-11/32 23/64 17/64 Cove RC-2485 –– 1/2 2-5/8 RCK-4851-11/32 25/64 21/64 Traditional RC-2486 –– 1/2 2-5/8 RCK-486

RCK-480 & RCK-485

R

RCK-480 & RCK-486

R

3/8"

25/64" 41/64"

5/16"

13/32"

5/8"25/64"

5/16"

CENTEROF TOOL

CENTEROF TOOL

C

To create a more authentic raised panel with a deeper reveal,use one of the many “Raised Panel” profiles in conjunctionwith the “Plunge Form” profile for one pass each. Completethe look with one pass of the “door edge” (see page 137) onthe outside of the door.

d

L

B

DD1 D1

5

B1

d

L

B

D

PLUNGE FORM

RAISED PANEL

PLUNGE FORM RAISED PANEL


Replacement knives are interchangeable and may be purchased separately.

139


For a complete replacement parts listing for the above cutters please refer to our website: www.amanatool.comMDF profiles shown at actual size. 3D renderings & tool illustrations not shown at actual size.

RCK-481 & RCK-485

RCK-482 & RCK-485

RCK-483 & RCK-485

RCK-480 & RCK-484

RCK-481 & RCK-484

RCK-481 & RCK-486

RCK-482 & RCK-486

RCK-483 & RCK-486

RCK-482 & RCK-484

RCK-483 & RCK-484

11/32"

21/32"13/32"

5/16"

23/64" 23/64"

43/64"35/64"

5/16"

3/8"

41/64"35/64"

5/16"

3/8"

5/8"35/64"

5/16"

23/64"

43/64"35/64"

5/16"

3/8"

35/64" 41/64"

5/16"

3/8"

5/8"35/64"

5/16"

43/64"35/64"

5/16"

5/8"35/64"

5/16"

3/8" 3/8"

41/64"35/64"

5/16"

CENTEROF TOOL

CENTEROF TOOL

MDF CABINET DOORS INSERT BITS (CONTINUED)


140

CNC

ROUT

ER B

ITS

CNCRouter Bits


15

19

W+858

H-9.33.7

W+33.383.3

H13

CNC MULTI PROFILE CARBIDE INSERT ROUTER BITSFOR MDF CABINET DOORS

W = width of the frame.H = maximum depth of the frame.The dimension W determines theframe width.The dimension H determines the profile depth.In the example shown, W = 50 and H = 13.Any change in the dimensions ofthe frame width and depth shouldbe done according to the formulathat is written on each tool drawing.

W+2474

H13

T.C. BladeRCK-194

T.C. BladeRCK-324

T.C. BladeRCK-192

T.C. BladeRCK-190

VIOLA Style

ØD B Tool No. L Ød56(2-1/4") 25(1") RC-2450 109(4-5/16") 3/4"

ØD B Tool No. L Ød56(2-1/4") 25(1") RC-2452 109(4-5/16") 3/4"

ØD B Tool No. L Ød32(1-9/32") 24(15/16") RC-2454 109(4-5/16") 3/4"

ØD B Tool No. L Ød106(4-3/16") 20(7/8") RC-4070 99.5(3-29/32") 3/4"

45º

12

60

18.8

H13

4

26.5

38W 50

R2 R1 R25.4

R1.5

R10 R0.2 R5 R105R5



Spiral & Straight Miter Fold & Chamfering Rabbeting DOOR JOINTING Grooving Planing &Compression Plunge Signmaking & Profiling MAKING Hogging

141

CNC ROUTER BITSSpiral & Straight Miter Fold & Chamfering Rabbeting DOOR Jointing Grooving Planing &

Compression Plunge Signmaking & Profiling MAKING Hogging

CNCRouter Bits

For a complete replacement parts listing for the above tools please refer to our website: www.amanatool.com

MULTI-FACE PROFILE ROUTER BIT This selection of bits is specifically designed for plunge cutting. The sharp point ensuresa clean, smooth entry, and the special carbide inserts can be quickly and easily replaced.

Raa Ro

o

NRC-B51 NRC-B52 NRC-B53 NRC-B54 NRC-B55

d

B

L

D

ØD a˚ R Profile Tool No. Ød L Max. RPM29.5(1-5/32") 45 — NRC-B51 RC-2460 3/4" 82.5(3-1/4") 28,00029.5(1-5/32") 30 — NRC-B52 RC-2462 3/4" 82.5(3-1/4") 28,00029.5(1-5/32") — 6.3(1/4") NRC-B53 RC-2464 3/4" 82.5(3-1/4") 28,00029.5(1-5/32") — 12.5(1/2") NRC-B54 RC-2466 3/4" 82.5(3-1/4") 28,00029.5(1-5/32") — 4(5/32") NRC-B55 RC-2468 3/4" 82.5(3-1/4") 28,000

Custom sizes available.

Profile 1 Profile 2 Profile 3 Profile 4

Sets:

INSERT STILE & RAIL ROUTER BIT SETSInsert stile and rail CNC router bit setcomes with up to five different stackingcutters and interchangeable knives forproducing various stile and rail profiles.

For softwood, hardwood and man-madeboards.

d

B

L

D

R10

R108

3.5 19.1

R5R57

3.5

2

19.1

8

R8

R8

3.5 19.10.

80

1.58 8

3.5 19.1RCK-291

RCK-291LRCK-292

RCK-292LRCK-294RCK-294L

RCK-296RCK-296L

Repl. T.C. Knife

4

5

2

3

1

ØD Set No. Cutters B Profile Ød Tool No. Max. RPM120(4-3/4") 1 1,2,3,4 20-35(7/8"-1-3/8") 1 3/4" RC-2260 12,000 RCK-291, RCK-19, RCK-71, RCK-68, RCK-11120(4-3/4") 1 1,2,3,4 20-35(7/8"-1-3/8") 2 3/4" RC-2262 12,000 RCK-292, RCK-19, RCK-71, RCK-68, RCK-11120(4-3/4") 1 1,2,3,4 20-35(7/8"-1-3/8") 3 3/4" RC-2264 12,000 RCK-294, RCK-19, RCK-71, RCK-68, RCK-11120(4-3/4") 1 1,2,3,4 20-35(7/8"-1-3/8") 4 3/4" RC-2266 12,000 RCK-296, RCK-19, RCK-71, RCK-68, RCK-11120(4-3/4") 2 1,2,3,4,5 20-35(7/8"-1-3/8") 1 3/4" RC-2268 12,000 RCK-291, RCK-19, RCK-71, RCK-68, RCK-11, RCK-291L120(4-3/4") 2 1,2,3,4,5 20-35(7/8"-1-3/8") 2 3/4" RC-2270 12,000 RCK-292, RCK-19, RCK-71, RCK-68, RCK-11, RCK-292L120(4-3/4") 2 1,2,3,4,5 20-35(7/8"-1-3/8") 3 3/4" RC-2272 12,000 RCK-294, RCK-19, RCK-71, RCK-68, RCK-11, RCK-294L120(4-3/4") 2 1,2,3,4,5 20-35(7/8"-1-3/8") 4 3/4" RC-2274 12,000 RCK-296, RCK-19, RCK-71, RCK-68, RCK-11, RCK-296L

Set 1 Set 1

Profile 1 Shown

Set 2

142

CNC

ROUT

ER B

ITS

Spiral & Straight Miter Fold & Chamfering Rabbeting Door JOINTING GROOVING Planing &Compression Plunge Signmaking & Profiling Making Hogging

CNCRouter Bits


INSERT GLUE JOINT

d

B

DD1

LCB1

B2

B3

INSERT FINGER JOINT ROUTER BIT

Insert finger jointing router bit complete with two cutting flutes.Suitable for producing finger joints in softwood, hardwood andman-made boards. For use on routers and machining centerswith CNC control.

d

B

L

DB1

C

Hard wearing steel body complete with tungsten carbide knives andscorer for improved finish. Suitable for producing various thicknessgrooves and slots in softwood, hardwood and man-made boards(with or without coating). Cutting width can be adjusted in 0.1mmsteps by using supplied spacer rings. Replaceable inserts ensure aconstant cutting diameter and finish quality. For use on routers andmachining centers with CNC control.

d

B

L

Dtt

Max. t

B

INSERT ADJUSTABLE GROOVING ROUTER BIT (4-15.5MM)

ØD B t Ød Tool No. L Max. RPM Repl. T.C. Knife120(4-3/4") 4-15.5(5/32"-5/8") 1-5/16" 3/4" RC-2340 139(5-1/2") 12,000 AMA-17, RCK-71, RCK-18

ØD ØD1 B B1 B2 B3 Tool No. C Ød L Max. RPMRepl. T.C. Knife50(2") 34.1(1-11/32") 40(1-1/2") 3(1/8") 13/64" 5/64" RC-2246 8(5/16") 1/2" 94(3-11/16") 18,000 RCK-234

ØD B B1 C Ød Tool No. L Max. RPM Repl. T.C. Knife70(2-3/4") 40(1-1/2") 5.4(7/32") 8(5/16") 3/4" RC-2240 100(4") 12,000 RCK-92

Insert glue joint router bit complete with two cutting flutes.Suitable for producing finger joints in softwood, hardwood andman-made boards. For use on routers and machining centerswith CNC control.

ALSO FOR USEIN

ROUTER TABLE

75º90º

60º

45º

30º

15º

4038

3428

2010

1020

3428

40

Artwork not shownat actual size.

143

CNC ROUTER BITSSpiral & Straight Miter Fold & CHAMFERING Rabbeting Door Jointing Grooving Planing &

Compression Plunge Signmaking & PROFILING Making Hogging

CNCRouter Bits


INSERT ADJUSTABLE CHAMFER ROUTER BITInsert router bit complete with two cutting flutes. Suitable forproducing chamfer cuts at various angles in softwood, hardwoodand man-made boards. Cutting angle can be adjusted in 7.5° stepsby using a notched scale. Fine adjustment of 1° is also possible.For use on routers and machining centers with CNC control.

d

B

L

D48mm18.5mm 18.5mm

INSERT DOUBLE ROUNDING ANDCHAMFERING ROUTER BIT SYSTEM

Insert profile router bit with two cutting flutes. Suitable forprofiling in softwood, hardwoods and man-made boards (withor without coating). Tool will be supplied with special insertsand backing plates ground to the customer’s own specification.For use on routers and machining centers with CNC control.

d

B

L

D

RB

R

R

10-50

6

6

Repl. T.C. KnifeUPPER LOWER

ØD B a° Ød Tool No. L Max. RPM Repl. T.C. Knife85(3-3/8") 40(1-1/2") -45° � +90° 3/4" RC-2370 100(4") 12,000 RCK-40

ØD R/a° B Tool No. Ød L Max. RPM90(3-9/16") 3 18-58(25/32 to 2-9/32") RC-2200 3/4" 186(7-5/16") 10,00090(3-9/16") 4 18-58(25/32" to 2-9/32") RC-2202 3/4" 186(7-5/16") 10,00090(3-9/16") 5 18-58(25/32" to 2-9/32") RC-2204 3/4" 186(7-5/16") 10,00090(3-9/16") 6 18-58(25/32" to 2-9/32") RC-2206 3/4" 186(7-5/16") 10,00090(3-9/16") 8 20-60(13/16" to 2-3/8") RC-2208 3/4" 186(7-5/16") 10,00090(3-9/16") 10 22-62(7/8" to 2-7/16") RC-2210 3/4" 186(7-5/16") 10,00090(3-9/16") 45˚ 12-62(1/2" to 2-7/16") RC-2212 3/4" 186(7-5/16") 10,000

Complete Set 3-10 & 45˚ 12-62(1/2" to 2-7/16") RC-2214 3/4" 186(7-5/16") 10,000Available in 25x55 (1" to 2-5/32") - Special Order.

RCK-290RCK-290L

R

RCK-280 RCK-280L ICK-60RCK-282 RCK-282L ICK-60RCK-284 RCK-284L ICK-60RCK-286 RCK-286L ICK-60RCK-288 RCK-288L ICK-60RCK-289 RCK-289L ICK-60RCK-290 RCK-290L ICK-60

ICK-60

144

CNC

ROUT

ER B

ITS

Spiral & PLUNGE Miter Fold & Chamfering Rabbeting Door Jointing Grooving Planing &Compression Signmaking & Profilling Making Hogging

CNCRouter Bits


d

B

L

D

INSERT MULTI PURPOSE PROFILEROUTER BIT

Insert straight router bit with two cutting flutes. Suitable forprofiling in softwood, hardwood and man-made board (with orwithout coating). Tool will be supplied with standard inserts(profile 1 or 2), or can be supplied with special inserts, groundto the customer’s own specification. For use on routers andmachining centers with CNC control.

30

Profile 1 Profile 228.2

R1

6.7

12.5

R3

R4

R15

R3

38 m

ax.

20

R3R4

R2.

5R4

R46

3.636.5

max

.6.3

BULLNOSE2 FLUTE & 3 FLUTE

BM

L

R

D

d

Shape the full edge of a workpiece with a bullnose radius bit. Idealfor shaping stair treads, window sills, table and counter edges,shelves, and making moldings. The “nose diameter” (M) is thethickness of stock that can be nosed, i.e., given a full 180-degreeroundover. Flats at top and bottom of the cutting edges createfillets on stock thicker than the nose diameter. Must be used withan edge guide on handheld routers or the fence on a router table.

51564-CNC 51566-CNC

ØD B Profile Ød Tool No. L Max. RPM Repl. T.C. Knife50(2") 60(2-3/8") 1 3/4" RC-2360 120(4-3/4") 18,000 RCK-17250(2") 60(2-3/8") 2 3/4" RC-2362 120(4-3/4") 18,000 RCK-174

*‘M’ R B Flute Tool No. ØD Ød L Max. RPM1-1/4 5/8 2 2 �51564-CNC 2 1/2 3-1/2 18,0001-1/2 3/4 2 3 �51566-CNC 2-3/8 1/2 3-1/2" 18,000

*’M’ denotes thickness of material on which a full 180 roundover can be accomplished.

�WARNING: These tools have an open flute design (not anti-kickback) and are intended for high feed-rate CNC machine use only. Do not use in portable routers.

For solid carbidespiral & compressionbits see pages 9-11

145

CNC ROUTER BITSSpiral & Straight Miter Fold & CHAMFERING Rabbeting Door Jointing Grooving Planing &

Compression Plunge Signmaking & PROFILING Making Hogging

CNCRouter Bits


DIAMOND TIPPED (PCD) ‘T’ SLOT ROUTER BIT

d

L

D

B145˚

B

D1 30˚

‘T’ Slot diamond tipped router (standard ‘T’ slot). Use withparticleboard MDF, both raw or with melamine, veneer, hardwood,etc. Re-sharpening one to two times.

POLYCRYSTALLINE DIAMOND (PCD) d

L1

L

D

B

If you're looking for the ultimate in tooling, you've found it. Our PolycrystallineDiamond tooling will cut a wide variety of tough, abrasive materials includingparticleboard, medium density fiberboard (MDF), plywood and plastic. Yet thecutting edge lasts up to 200 times longer than carbide. In the long runPolycrystalline Diamond is the most economical choice.

DIAMOND TIPPED (PCD) ROUTER BIT UP/DOWN-SHEARW/CARBIDE PLUNGE POINT RH ROTATIONDiamond tipped router bit for grooving, jointing & rabbetingin composite materials (particleboard, MDF both raw orwith melamine, veneer, hardwood, etc.). Up/Down-shear fordouble sided material. Resharpening one to two times. Number of blades 1+1.

ØD B D1 # of blades Tool No. B1 Ød L Max. RPM1-3/8 1/4 3/8 2+1 DRB-300-RH 1/16 1/2 2-3/8 30,0001-3/8 1/4 3/8 2+1 DRB-304-LH 1/16 1/2 2-3/8 30,000

CHIPBOARD WITH PLASTIC COATINGMultipliers for Different Materials:MDF: 0.8, Chipboard without coating: 1.1

Cross grain veneer: 0.7Feed Rate mm/min Feed Rate inches/min

FROM UP TO FROM UP TO

5,400 9,000 213 3545,400 9,000 213 3545,040 8,400 198 3316,300 9,450 248 3723,600 5,400 128 1707,560 10,080 298 3976,660 8,880 262 3505,760 7,680 227 3024,500 6,000 0 0

ØD B Ød L1 L Tool No. Max. RPM1/2 1 1/2 1-3/8 2-3/4 DRB-200 30,0001/2 1 1/2 1-3/4 3-3/8 DRB-204 30,0001/2 1-3/8 1/2 1-3/4 3-3/4 DRB-208 30,0005/8 1 1/2 1-3/8 2-7/8 DRB-212 27,0005/8 1-5/8 5/8 1-3/4 4 DRB-216 27,0003/4 1 3/4 2 3-3/8 DRB-220 24,0003/4 1-3/8 3/4 2 3-3/4 DRB-224 24,0003/4 1-5/8 3/4 2 4 DRB-228 24,0003/4 2-1/16 3/4 2 4-1/2 DRB-232 24,000

Date post:	14-Mar-2018
Category:	Documents
Upload:	trinhnguyet
View:	222 times
Download:	2 times

‘V’ GROOVE “MITER FOLD“ #RC-1028 PAGE 132 - … CNC ROUTER BITS CNC Router Bits Wood...

Documents