A wide range of DeVilbiss extensions are available for those difficultto reach applications.

finishingbrands.eu

DEVILBISS SPRAY GUN EXTENSIONS

The DeVilbiss extension range ismanufactured from brass with stainlesssteel needles as standard, they are

available for Advance HD manual andCobra 2 automatic pressure spray guns.When ordering ensure the part number for

the model is completed with the requiredlength in inches. Other lengths and flexibleextensions are available upon request.

Fan adjuster

(spray guns not included)

C360 degree circular spray

For medium to heavyviscosity materials. Withadjustable spray gap.0.062” tip supplied as

standard.(0.093” tip available)

SC360 degree circular spray

For low to mediumviscosity materials. Withadjustable spray gap.

SAforward round spray

EAforward fan spray

EAXforward fan spray

EXTADV-C-XXXX = add length needed in inches to complete

part number.

EXTADV-SC-XXXX = add length needed in inches to complete

part number.

EXTADV-SA-XXXX = add length needed in inches to complete

part number.

EXTADV-EA-XXXX = add length needed in inches to complete

part number.

EXTADV-EAX-XXXX = add length needed in inches to complete

part number.

EXTCB2-C-XXXX = add length needed in inches to complete

part number.

EXTCB2-SC-XXXX = add length needed in inches to complete

part number.

EXTCB2-SA-XXXX = add length needed in inches to complete

part number.

EXTCB2-EA-XXXX = add length needed in inches to complete

part number.

EXTCB2-EAX-XXXX = add length needed in inches to complete

part number.

3/4” (19mm)

3/8” (9.5mm)

7/16” (11mm)

13/4” (44mm)

7/8” (22mm)

Hardened nozzle versions are available

(type CVT and type HCVT) for Ceramic/Abrasive

paints

SC-MBX version alsoavailable with very finequality spray (gap not

adjustable)

For low to mediumviscosity materials.Supplied with 0.078" (1.98 mm) fluid tip.

Supplied with66BSSx63PBset up. Fluid tip

0.046"(1.17 mm).

Supplied with J2SS x AA1fan spray set up. Fluid tip

0.043" (1.09 mm).

46-1042 round spray cap (optional).

EXTENSION Type of spray To fit Advance HD part number

To fit Cobra 2 part number Clearance diameter Comments

spray tips

mb air systems ltd

mbmb air systems ltd

USA Mexico Brazil

United Kingdom France Germany

China Japan Australia

© Finishing Brands Holdings Inc. DeVilbiss, Ransburg, BGK and Binks are registered trademarks of Finishing Brands.Models and specifications subject to change without notice. All rights reserved.

ARB - 08.10 - UK1852

www.finishingbrands.eu

email: marketing@finishingbrands.eu

f i n i s h i n g b r a n d s . e u

Sales and Service through ourGlobal Network of Industrial DistributorsFinishing Brands Locations

Americas:

Europe/Asia/Africa:

Pacific Rim:

DEVILBISS SPRAY GUN EXTENSIONS

EB90 degree fan spray

EBX90 degree fan spray

EN45 degree fan spray

ENX45 degree fan spray

ERX30 degree

reverse fan spray

EXTADV-EB-XXXX = add length needed in inches to complete

part number.

EXTADV-EBX-XXXX = add length needed in inches to complete

part number.

EXTADV-EN-XXXX = add length needed in inches to complete

part number.

EXTADV-ENX-XXXX = add length needed in inches to complete

part number.

EXTADV-ERX-XXXX = add length needed in inches to complete

part number.

EXTCB2-EB-XXXX = add length needed in inches to complete

part number.

EXTCB2-EBX-XXXX = add length needed in inches to complete

part number.

EXTCB2-EN-XXXX = add length needed in inches to complete

part number.

EXTCB2-ENX-XXXX = add length needed in inches to complete

part number.

EXTCB2-ERX-XXXX = add length needed in inches to complete

part number.

3” (76mm)

17/8” (48mm)

25/8” (67mm)

13/4” (44mm)

2” (51mm)

Supplied with66BSSx63PB set up.

Fluid tip 0.046" (1.17 mm).

Supplied with J2SS x AA1 fan spray set up.

Fluid tip 0.043" (1.09 mm)

42-1042 round spray cap (optional).

Supplied with66BSSx63PB set up.

Fluid tip 0.046" (1.17 mm).

Supplied with J2SS x AA1 fan spray set up.

Fluid tip 0.043" (1.09 mm)

42-1042 round spray cap (optional).

Supplied with J2SS x AA1 fan spray set up.

Fluid tip 0.046"(1.17 mm).

42-1042 round spray cap (optional).

EXTENSION Type of spray To fit Advance HD part number

To fit Cobra 2 part number Clearance diameter Comments

Fan adjuster

Fan adjuster

To order a spray gun for the extension use the part numbers below. Bare Spray gun’s exclude needle, air cap, fluid tip and retaining ring.

– Advance conventional gun ADV-P000-00– Cobra 2 conventional gun CBA2-000-00

Note: Extensions are “made to order” and therefore cannot be returned for credit.

Length measurement (approximate) is taken from the gun fluid inlet to the tip of the extension.

Extensions are complete with air cap, fluid tip, needle and air cap retaining ring. Extensions do notinclude the spray gun.

All fluid tips are stainless steel except type SC which are chrome plated brass and SA are plated steel.

Length options 6" (15cm), 9" (23cm), 12" (31cm), 15" (38cm), 18" (46cm), 24" (61cm), 30" (76cm), 36" (91cm), 48" (122cm), 60" (152cm), 72" (183cm), 84" (213cm)Extensions are for use on pressure feed applications only.

mb air systems ltd

mbmb air systems ltd