9
V3-203A-1 V3-203A-1 December 2016
V3-203A-1
V3-203A-1December 2016
Dispenses chilled, still water
Substantially reduce costs of purchasing pre-bottled mineral waters
Re-usable glass bottles in 425ml, 500ml, 750ml and 1 liter sizes
Bottles can be customized
Save the environment - eliminate regular deliveries, as well as the disposal of empty bottles and packaging
High performance ice-bank refrigeration system: capable of delivering very high volumes of chilled water at low temperatures, particularly at peak demand times
Power-saving option to reduce electricity
Eliminate any storage issues
Purposedesignedbottle-washingtrays,designedtofitmostcommercialdishwashers
Removable tap nozzles for ease of cleaning and sanitizing
Stainless steel drip tray
HIGH VOLUME BOTTLER Re-usable glass bott ler | V3-203A-1
V3-203A-1
V3-203A-1
0908
10
07
06
05
04030201
Chiller Dimensions
35
3 8"
12
7 8"
30"Cabinet Width
FilterTrapped Waste Upstand Terminate 24" above the floorMains Water Inlet Terminate 24" above the floorChiller
NEMA5-15 Double Socket
10"
25 38 "
15
1 4"
RJ 14.06.16
ITEM NO. PART NUMBER DESCRIPTION QTY.01 03.050.02 NEMA 5-15 102 03.019.01 LH Water Pipe LH 103 03.027.01 RH Trap RH 104 Viv 055 01.3 Chiller 105 FILT-HF-20.0.6 Filter 0.5 Micron 106 3M-52-180009 r-h Water Filter Adaptor 107 03.011.01 Door Grille 408 Viv 01 026.00 COBRA CB1-L 109 Viv 05 022.1 Grid 110 Viv 05 023.1 Tray 1
8 7
A
B
23456 1
578 246 13
E
D
C
F F
D
B
A
E
C
DRAWN
CHK'D
MODIFICATIONMOD
UNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN inchesSURFACE FINISH:TOLERANCES:
FINISH:
NAME DATE
MATERIAL:
DO NOT SCALE DRAWING
REVISION
TITLE:
DWG NO.
SCALE:1:50WEIGHT:
V3-203-A-1
US-203 Bottling system (Viv055)
APPROVAL STANDARD
VIVREAU North AmericaVivreau LimitedTel 877 999 1044www.vivreau.com
This Drawing is COPYRIGHT and is the sole property of VIVREAU Limited. It shall not be copied or reprodused in any retreivable form without the written permission of VIVREAU Limited C 2015 VIVREAU Limited
V3-203A-1
10"
25 38 " 15 1
4 "
Technical Specification
Compressor....................................1/2hpRefrigirant.......................................R-134aMaximum reccomended lengthof Python........................................120"Water Bath Capacity
Ice Bank Size................................20lbRecovery Time.............................2.5 hrsElectrical Requirements.............120V/60Hz/7.2AShipping Weight..........................76lb
D
E
F
C
1 2 3 4
B
A
321 5
C
D
4 6 7 8
A
B
A3
SCALE:1:5
DWG NO.
TITLE:
REVISION
DO NOT SCALE DRAWINGMATERIAL:
Date
NAME
FINISH:
Drawn
Revision
VIVREAU North AmericaTel 877 999 1044www.vivreau.com
This Drawing is copyright and is the property of Vivreau Limited. It may not be copied or reproduced without theexpress permission of Vivreau Limited COPYRIGHT C VIVREAU LIMITED 2009
DATE
DATE
Approved
Approved
Viv 055 01.3
Chiller VIVREAU North America
RJ 23.09.10
V3-203A-1
Worktop Cutout Detail
37 8
"2
7 8"
51 8
"15
8"
12 18 "
123 4
"
193 4
"RJ 22.06.16
8 7
A
B
23456 1
578 246 13
E
D
C
F F
D
B
A
E
C
DRAWN
CHK'D
MODIFICATIONMOD
UNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN MILLIMETERSSURFACE FINISH:TOLERANCES:
FINISH:
NAME DATE
MATERIAL:
DO NOT SCALE DRAWING
REVISION
TITLE:
DWG NO.
SCALE:1:10WEIGHT:
SCT- US.04
Single Cobra/Recessed Tray
APPROVAL STANDARD
VIVREAUVivreau LimitedUnit 44 Metropolitan Park. Norwich Rd.Greenford. Middlesex. UB6 8UB
Tel: 0845 6749655www.vivreau.com
This Drawing is COPYRIGHT and is the sole property of VIVREAU Limited. It shall not be copied or reprodused in any retreivable form without the written permission of VIVREAU Limited C 2015 VIVREAU Limited
NOT TO SCALE
V3-203A-1
1). Front VentilationShowing Ventilation grilles cut in a standard door panel
2). Side VentilationVentilation grilles cut in the sideof a standard 24" cabinet. The grilles may be fitted on either side provided theyventilate into a free and unobstructed area
Cut-out detail for the available12" VIVREAU grill, shown in a 23.5" (24") wide door
The cabinet may be ventilated in several different ways to prevent excessive heat build-up. the methods shown all take advantage of natural circulation by placing two grilles or cut-outs; one near the base and the other at the top of the enclosure.
Available VIVREAU Grill
4). Base CutoutVentilation can be made to the base of the cabinet, with the removal of a narrow section of floor, immediately behind the door and trim with roll edging strip. Typical cut-out size must not be less than 11.0" wide x 1.5" deep
PLEASE NOTEAll vents must open to fresh air in a free and unobstructed area.
3). Base VentilationVentilation grilles cut in the cabinet'sbase panel and base plinth. Top ventilationwill also be required in either the side panelsor a cut-out in the top of the door.
45 8
"
2"
2"
45 8
"
11"
11 34 "
51 8
"
41 2
"
38 "
B
C
D
1 2
A
321 4
B
A
5 6
FINISH:
Name Modification
MATERIAL:
ALL DIMENSIONS IN INCHES
REVISION
TITLE:
DWG NO.
SCALE:1:50 SHEET 1 OF 1A4
C
WEIGHT:
Viv066 .01
Preferred Methods of Cabinet Ventilation
DRAWN/DATE
VIVREAU North AmericaVivreau North America
Tel.877 999 1044www.vivreau.com
DO NOT SCALE DRAWING
This Drawing is COPYRIGHT C 2013 and is the sole propertyof VIVREAU Limited. It sall not be copied or reproduced in any form without the express permission of VIVREAU Limited
ORJ 27.06.2013
V3-203A-1
BOTTLER North Amer ica V3-203A-1 Speci f icat ion Sheet
Product Dispensed:Advancedmicro-filtered,chilledstillwater
Application:ForthepurposeoffillingVivreaure-usableglassbottles
Equipment Dimensions:See Drawings of component parts, options A and B
Cobra Tap: 19 3/4” Inches (total tap height mounted) *Maximum Counter thickness for mounting cobra tap 1 ½”
Option A Minimum Space Required: Height 24” Width 30” Depth 24”
Option B Minimum Space Required: Height 29 ½” Width 24” Depth 24”
The following services are required to be supplied by the customer and must be available prior to installation:
1 potable 1/2” cold water supply terminating in a ½” ball valve, ½” female pipe thread. (ball valve must be accessible for service and installation)
*TheVivreausystemincorporatesbackflowprevention,anyadditionalbackflowdevicesrequiredbylocalorstatecodemustalsobesuppliedbythecustomerpriortoinstallation.Thereshouldnotbeanyotherfilters/pre-filtersbeforetheVivreausystem.
Water Supply½” Threaded Ball Valve
V3-203A-1
Minimum water pressure 50 PSI
Minimumwaterflow80Gallonsperhour
1 15amp electrical receptacle (5-15) 120v/60hz
Electrical run current 7 amps
Cut out for Drip Tray and Cobra as per attached template
Drip Tray Drain. Customer needs to supply a rigid vertical pipe that drains to a properly trapped drain according to local codes. The vertical pipe for the drip tray drain must be located inside the installation cabinet and must be a least 1 1/4” ID.
If the system is to be installed in an enclosed space or cabinet adequate ventilation must be provided. (failure to provide ventilationwillaffectwaterquality)
Location of Services: (all services must be accessible for installation and service)
Please ensure all services are kept within 40” of bottling system
Watershut-offvalvetobelocatedatlowlevel.Pleaseensurethatthereissufficientroomfora12”longfittingtobeconnectedtotheshut-offvalve.
Top of waste receptacle should be located a minimum of 6” below the work surface the drip pan will be installed in.
*The taps must be mounted on the work surface directly above the main system.
Insulation:PleaseensurethatallwaterpipesfeedingtheVivreauSystemarecorrectlyinsulatedtoensurethatthewaterdoesnotheatupwithinthepipespriortoenteringtheVivreausystem.Thisisessentialforwaterqualityreasons.
If the system is to be installed in an enclosed space, adequate ventilation must be provided.
For Indoor Use Only
VIVREAU Benelux
Tel: +31 (0)6 1190 6790
Email: [email protected]
VIVREAU UK (head office)
+44 ( 0)845 674 9655
email: [email protected]
VIVREAU Russia
Tel: +74 9 5620 4720
Email: [email protected]
VIVREAU New Zealand
Tel. +64 9 377 8621
Email: [email protected]
VIVREAU Ireland
+44 ( 0)845 674 9655
email: [email protected]
VIVREAU USA
+1 877 999 1044
email: [email protected]
VIVREAU South Africa
+27 21 671 6306
email: [email protected]
VIVREAU Pacific Islands
Tel. +64 9 377 8621
Email: [email protected]
VIVREAU Switzerland
+41 (0)22 344 86 70
email: [email protected]
VIVREAU Canada
+1 877 999 1044
email: [email protected]
VIVREAU Australia
Tel: +61 3 9590 0886
Email: [email protected]
VIVREAU Poland
Email: [email protected]
EUROPE
NORTH AMERICA
ASIAN PACIF IC AFRICA
