motorola RAZR V3i with iTunes®
Install Memory Card
Press battery door release latch and
remove battery door.
1
Slide card under metal clip and into
card slot. Card should be inserted
with the print side up.
2
Replace battery cover.
3
motorola RAZR V3i with iTunes®
View Storage Information
Press the Menu key, then select
Settings
Phone Status
Storage Devices
1
Press Details.
Tip: Press Menu key to
format or rename the card.
2
motorola RAZR V3i with iTunes®
View Multimedia
Press the Menu key, then select
Multimedia
Pictures, Sounds, or Videos
1
Select the picture and press View.
3
The icon at the top of the picture
list shows whether the pictures
are on the memory card or in
phone memory. To switch to the
other storage device, press the
Menu key and select
Switch Storage Device
Memory Card or Phone
2
motorola RAZR V3i with iTunes®
Transfer Multimedia
Press the Menu key,
then select
Settings
Connection
USB Settings
1
Scroll right to change
Default Connection to
Memory Card.
2
Find where your phone's memory card
displays as a Removable Disk icon.
On a PC, this is the My Computer
window. On a Mac, it's on the desktop.
Double click the Removable Disk icon.
4
Drag and drop files between
your computer and phone.
Use the following folders
when copying files to the
memory card:
mobile/picture - pictures,
wallpaper,
screen
savers
mobile/video - video clips
mobile/audio - MP3 files
5
When you finish, remove the
phone with memory card safely
from your computer.
On a PC, right click the Safely
Remove Hardware icon at the
bottom of your computer screen,
then select USB Mass Storage
Device and press Stop.
On a Mac, select and drag the
Removable Disk icon to the Trash.
6
Attach one end of the MotorolaOriginal Enhanced USB cable to yourphone and the other end to a USB porton your computer.
3
Select USB Mass Storage Device
and press OK.
Now it is safe to disconnect the
cable.
7
motorola RAZR V3i with iTunes®
Take and Send a Picture
Press the Menu key, then select
Multimedia
Camera
1
To change the picture
resolution, press the Menu
key and select
Pictures Setup
Change
Note: High-resolution
pictures can be stored only
on the memory card. You
may not be able to send
high-resolution pictures in a
multimedia message. Check
with your service provider
on file size restrictions.
3
To view or change where your
pictures are stored, press the
Menu key, then select
Switch Storage Device
Memory Card or Phone
2
Scroll up or down to view
camera settings.
Scroll right or left to change
a setting.
4
Press Capture or center
navigation key.
5
Press Send
-or-
Press the Menu key for other
storage options.
6
Enter a short message
(optional), then press Send To.
7
Select one or more names
from your phonebook.
Select the name, then press
center navigation key so a
checkmark appears.
Select the name again to
remove it from the message
(checkmark disappears).
Press Send.
8
motorola RAZR V3i with iTunes®
Record a Video
Press the Menu key, then select
Multimedia
Video Camera
1
Scroll up or down to view
video settings.
Scroll right or left to change
a setting.
3
To view or change where your
pictures are stored, press the
Menu key, then select
Switch Storage Device
Memory Card or Phone
2
To start recording,
press Capture.
To stop recording,
press Stop.
4
Press the center navigation
key to store the video on
your phone.
-or-
Press Options and select
Send in Message to send the
video in a multimedia
message (MMS).
5
motorola RAZR V3i with iTunes®
Play a Video
Press the Menu key, then select
Multimedia
Videos
1
Select a video and press Play.
3
View videos on memory card
or phone memory by pressing
Menu key, then selecting
Switch Storage Device
Memory Card or Phone
2
Scroll up to pause/play.
Scroll down to stop.
Scroll right/left to skip to
next/previous video.
4
Transfer Music
To transfer and play songs
using iTunes®, you must:
• Install a memory card in
the phone.
• Set the default USB
connection to the memory
card.
• Install the iTunes desktop
application on your
computer. Use the CD-
ROM that came with your
phone, or download the
latest version from
www.itunes.com/download.
Note: iTunes version 6.0.1
or higher is required.
For information on how to
transfer songs with a bit rate
higher than 128 kbps, see your
phone's User Guide.
Press the Menu key, then select
Settings
Connection
USB Settings
1
On your computer, open the iTunes
desktop application.
3
To manually transfer songs, drag and
drop them to the phone icon in the
Source list.
-or-
To transfer a random selection of
songs, select your phone in the Source
list and then click Autofill. Songs are
transferred according to your settings
in the iTunes desktop application.
Note: Transfer times depend on the
size of the song. An average song may
take 45 seconds or longer to download
to the phone.
motorola RAZR V3i with iTunes®
Connect one end of the MotorolaOriginal Enhanced USB cable to yourphone and the other end to a USB porton your computer.
4
Scroll right to change
Default Connection to
Memory Card.
2
6
Wait for the phone icon to appear in the
Source list. This may take up to one
minute.
5
When the transfer is complete,
you will see a message in the
iTunes desktop application and
the Do Not Disconnect message
on the phone disappears.
Click the Eject button next to the
phone icon in the desktop
application and remove the cable.
Do not disconnect the cable until
the transfer is complete.
7
motorola RAZR V3i with iTunes®
Play Songs
To add music to your iTunes
library, you can purchase music
from the iTunes Music Store or
import CDs.
To learn more, visit
www.apple.com/support/itunes
for information on how to load
music into iTunes.
Press the iTunes key.
1
Scroll up or down to adjust the
volume.
Scroll left or right to play the
previous or next song.
Press and hold the left or right
navigation key to rewind or fast
forward the current song.
3
Select Songs, then scroll right.
Select a song and press Play.
Tip: To play all songs in a list,
select Playlist, Artists, Albums,
or Songs then scroll right. Select
All and press Play.
2
Use the wired stereo headset
to listen to music.
You cannot listen to music
using a Bluetooth® headset or
while a Bluetooth headset is
connected to your phone (turn
the headset power off).
4
motorola RAZR V3i with iTunes®
Pair (Link) Headset
Press the Menu key, then select
Settings
Connection
Bluetooth Link
Setup
1
On the headset, press and hold the Call
button until the light turns on and
remains steadily lit.
If the light is flashing or does not remain
steadily lit, make sure the headset is fully
charged and repeat this step.
Note: If your headset has a folding
microphone, quickly unfold the
microphone as soon as the light is
steadily lit.
3
Select Power, then scroll right
to turn the power On.
2
On your phone, press Back,
then select
Handsfree
Look for Devices
4
motorola RAZR V3i with iTunes®
Pair (Link) Headset
To test the pairing connection,
put the headset on and make a
call.
If your phone and headset are
successfully paired, you will
hear ringing.
To save battery life, keep your
headset turned off when not in
use.
7
Enter the passkey 0000 and
press Ok.
When pairing is successful, the
headset light changes from
steadily lit to flashing and the
Bluetooth icon appears in the
top status bar.
6
Select the headset, then press
Yes when prompted to bond.
5
motorola RAZR V3i with iTunes®
Autoconnect Headset
After you pair (link) your headset
and phone, you can set up your
phone to automatically connect
to the headset when you turn
the headset on.
Press the Menu key, then select
Settings
Connection
Bluetooth Link
Device History
1
Select Access, scroll right to
change it to Automatic, and
press Done.
3
Select the headset.
2
To use your headset, turn the
headset power on.
To disconnect your phone from
the headset, turn the headset
power off.
4
