CapSmart-IPS (Intelligent Pressure Switch) All System 1 Models An automatic pump control system with advanced protection features:

• Fully automatic on/off electronic control

• Simple digital interface for display and setup

• Real-time display of pressure and current (Amps)

• Set system parameters

• Alarm log for diagnostics and testing

• Advanced protection against dry run, anti-seizure, anti-freeze and over-pressurisation

• Unique current sensing technology prevents motor burnout

• Standard 10amp 3 pin 240v power connection – Plug directly into standard powerpoint.

CapDrive Ultimate (Constant Pressure Control) All System 3 Models

CapDrive is unique, water-cooled full flow control system that delivers exceptional efficiency and expanded control options.

• Fully automatic electronic control system

• Programmable, user-friendly digital interface

• Real-time system feedback including pump pressure and motor current

• Fault finding, diagnostics and error logging

• Variable Frequency Control Technology

• Digital inputs enable additional device/control equipment connection

• Dry-run and over-pressurisation protection

• 240v or 3-Phase connection (3 Phase connection requires licensed electrician).

At the heart of all our CapSub Systems are Caprari’s E4XP Series Pumps. The E4XP Series Pump platform is newly designed from the ground-up, using the latest technology, materials and patented design innovations to deliver the most efficient, longest service life submersible pumps available.

Intelligent Control

In the pilot’s seat of every system is a selected Caprari Controller, designed to extend service life of your bore pump investment through innovative high-efficiency control systems, advanced protection features and whisper quiet operation.

The E4XP Series Submersible Pump range extends beyond the models used in our systems, and can deliver a maximum flow 390l/min (5200 gph), and head to 400m (570 psi)

• The most power efficient 4” submersible pump range available

• High Operating Reliability – Designed and manufactured by Caprari Pumps in Italy

• Slimline 98mm Design for easy fit in 4” bore holes

• Handles extreme sand and solid conditions - up to 300g/m3 (double the industry standard)

• Suitable for retrofitting and new bore installations, and all applications of groundwater extraction.

• Easy maintenance

• Available in 240V 1 Phase to 2.2 kW & 415V 3 Phase to 7.5kW.

Constructed to Last

• Cast stainless steel components and for high strength and durability

• Stainless steel wear rings & spacer for high strength & higher pressures

• Latest generation thermoplastics for efficiency and durability

Lexan® Impeller = Highest Efficiency Noryl® Diffuser = Abrasion and Corrosion Resistant.

Most Efficient Pumps Available

• E4XP Series Pumps consume less power for the same water delivery performance. Do the comparison of head and flow yourself with alternative pumps

• Operating characteristics guaranteed to meet the International Standard ISO 9906 Grade 2.

Patented Design Innovations

Defender® Integrated Galvanic Corrosion System protects the pump and motor from galvanic corrosion by passivating stainless steel components. Galvanic corrosion is one of the most common causes of bore pump failure.

Easy-Check® Combining a unique low headloss check valve for improved flow, and innovative sealing and assembly system to extend pump life, avoid the possibility of the check valve jamming, and simplify inspection and maintenance.

Desert Sand-Out® Technology and materials enable extreme environment operation with no sacrifice in performance, efficiency, or longevity. The Desert system delivers best in class capabilities for sandy bores, and can handle up to 300 gm3 of solids – twice the industry standard.

CapSmart-VFD (Variable Frequency Drive) All System 2 Models

Capsmart VFD maintains a constant delivery pressure by matching pump speed to water delivery requirements – eliminating pressure fluctuations when demand changes.

• Fully automatic electronic control system

• Programmable, user-friendly digital interface

• Real-time system feedback including pump pressure and motor current

• Fault finding, diagnostics and error logging

• Variable Frequency Control Technology

• Reduced power consumption; power consumed matches water delivery requirements

• Dry-run protection with automatic system reset and restart

• Over pressurisation cut out protection

• Soft start eliminates water hammer

• Standard 10amp 3 pin 240v power connection – Plug directly into standard powerpoint.

E4XP Series Submersible Pumps - The Next Generation

CapSub Submersible Pump Systems

The most advanced, most efficient, most reliable 4” bore pump system available

pumping power

Dealer Stamp:Caprari Australia – Head Office 3 Jeanes Street Beverly, Adelaide SA P 08 8244 4442 F 08 8244 4462 E sales@caprari.com.au

New Zealand Office21 Livingstone Street, Phillipstown, ChristchurchP 03 451 1939 F 03 451 1939

capsub.com.au caprari.com.au

CapSub

There’s a CapSub System to suit virtually any bore-hole or groundwater extraction requirement - from direct domestic supply through garden and small acreage irrigation, tank filling and stock watering.

No guessing, nothing missing - Caprari Pumps Australia have combined best in class components to deliver a complete system for domestic and light commercial bore applications - coming complete with a full, 2-year system guarantee, and everything required for a simple, no-fuss installation.

You might not have heard of us. Caprari Pumps Australia has been servicing the Australian industrial and commercial markets since 2004, with Italian Parent - Caprari Pumps - a recognised global leader and innovator in design and manufacture, serving the international pump industry since 1945.

If CapSub doesn’t suit your requirements, Caprari Pumps Australia can offer a custom engineered solution from our extensive range of class-leading submersible pumps. Caprari designs and manufactures pumps to suit bores from 3” to 22”, flows from 0.2 to 350 l/s and motors delivering 0.37 to 370kW in pumping power - we can guarantee a solution to any pumping requirement! Visit www.caprari.com.au to view the full range.

CapSub is a complete bore hole pumping and control system - designed and configured by the manufacturer, and delivered complete with everything you need for DIY installation.

The most advanced, most efficient, most reliable 4” bore pump system available... Drop it down. Plug it in. Turn it on.

Simple Self Installation

Each CapSub System includes everything you need for simple installation. It’s professionally pre-wired, internally pre-plumbed with the pump unit, power supply and rising main configured to match your supplied bore specifications.

Installation is as simple as:

• Lower the pump into your bore well

• Plumb up output to your water delivery system

• Plug controller into a standard 10amp 240v Power Point*

• Switch it on and done.

All System 1 and 2 models have been designed to fit in the widely available Polyslab® pump cover (cover not included). Polyslab® is available from most pump shops, in a wide range of colours.

* System 3 - Model 170-70 requires 3-Phase hardwired supply, and requires a licensed electrician for connection.

Matching your unique bore specifications and water delivery requirements with a suitable submersible pump end, motor and controller is the job of a pump professional. Caprari Pumps Australia have designed an Online Selection Calculator - that allows you to benefit directly from our vast technical experience and instantly select the best CapSub System for your circumstances and requirements.

All you need are your bore details (from the bore drillers report), and an idea of water supply requirements - then our selection guide does all the underlying calculations to profile the best system for the job.

CapSub Systems are supported by the Caprari Professional Pump Dealer Network. Your Professional Pump Dealer Network member can provide technical advice, pump selection guidance, sales and accessories, along with after sales service and spare parts.

To find your nearest dealer, and for additional technical resources, products and information visit capsub.com.au

How to select the right CapSub System for you

capsub.com.au

CapSub System Components

System 1 System 2 System 3Domestic, Low flow / shallow well bores

Domestic, Low flow / shallow well bores

Small home and/or

Garden

Medium to Two

Storey Home and

Garden

Medium to Two

Storey Home and

Garden

Larger Homes and

Gardens

Large Homes /

Farms / Small

Commercial /

Gardens

Farms / Commercial

Properties /

Irrigation

Model Number 40-30 45-40 60-50 60-75 90-50 90-70 130-70 170-70

Everything you need ü ü ü ü ü ü ü ü

A Caprari E4XP Series Pump Model 25/6 25/9 30/11 30/16 35/10 35/14 40/17 50/16

B Motor Model 4R201 4R202 4R203 4R204 MCH415-6 MCH42-6 MCH43-6 MCH44-8

Motor P2 Power (kW) 0.37 0.55 0.75 1.1 1.1 1.5 2.2 3

C Controller

Controller Model CapSmart IPS CapSmart IPS CapSmart IPS CapSmart IPS CapSmart VFD CapSmart VFD CapDrive Ultimate CapDrive Ultimate

Automatic On/Off Control ü ü ü ü ü ü ü ü

Variable Frequency Drive (Constant Pressure) ü ü ü ü

Current sensing technology

(Pump & Motor Protection)ü ü ü ü ü ü ü ü

Plug and Play - 240v 10 Amp 3 Pin "IN" (2m Length) ü ü ü ü ü ü ü 415V, 3 Phase

Power Out, to Motor 240V, 1 Phase 240V, 1 Phase 240V, 1 Phase 240V, 1 Phase 240V, 3 Phase 240V, 3 Phase 240V, 3 Phase 415V, 3 Phase

Performance Characteristics

Metric

Max Head (m) 37 55 69.5 102 66 82 108 106

Max Flow (l/min) 66 66 90 90 120 120 180 240

Output at BEP 48 l/min @ 250 kPa 48 l/min @ 400 kPa 60 l/min @ 500 kPa 60 l/min @ 750 kPa 90 l/min @ 520 kPa 90 l/min @ 700 kPa 144 l/min @ 600 kPa 204 l/min @ 750 kPa

Imperial

Max Pressure (psi) 52 78 99 145 94 117 154 151

Max Flow (gph) 880 880 1200 1200 1600 1600 2400 3200

Output at BEP 630 gph @ 37psi 630 gph @ 57psi 800 gph @ 73psi 800 gph @ 109psi 1,200 gph @ 75psi 1,200 gph @ 102psi 1,920 gph @ 87psi 2,720 gph @ 109psi

J Delivery Connection (BSP) 32mm

(1 1/4”)

32mm

(1 1/4”)

32mm

(1 1/4”)

32mm

(1 1/4”)

32mm

(1 1/4”)

32mm

(1 1/4”)

50mm

(2”)

50mm

(2”)

The Pump and Motor

Galvanic Defender ® Corrosion Protection ü ü ü ü ü ü ü ü

Easy Check ® High Flow Check Valve ü ü ü ü ü ü ü ü

Desert Sand ® (Sand Protection system to 300gm3) ü ü ü ü ü ü 150gm3 150gm3

Down the Bore

D Electrical Drop Cable (High Quality Rubber

Submersible rated)

2C+E 1.5mm 2C+E 1.5mm 2C+E 1.5mm 2C+E 1.5mm 3C+E 2.5mm 3C+E 2.5mm 3C+E 2.5mm 3C+E 2.5mm

E Flexibore® 100 Series Flexible Rising Main,

c/- Stainless Steel Couplingsü

cut to length

ü

cut to length

ü

cut to length

ü

cut to length

ü

cut to length

ü

cut to length

ü

cut to length

ü

cut to length

Flexible Rising Main Size 32mm 32mm 32mm 32mm 32mm 32mm 50mm 50mm

Pump and Motor Suspension

F Solid Stainless Steel Bore Cap (Adjustable) - Suit

Bores

4-6” 4-6” 4-6" 4-6" 4-6" 4-6" 4-6" 4-6"

Bore Cap Outlet (Threaded) 1 1/4” 1 1/4” 1 1/4" 1 1/4" 1 1/4" 1 1/4" 2" 2"

Additional Plumbing and Components

Fits inside Std "Polyslab" Pump Cover ü ü ü ü ü ü x x

G 18L Horizontal Pressure Tank ü ü ü ü ü ü ü ü

H Connection Kit 316SS 1” 1” 1" 1" 1" 1" 1" 1"

I Bracket 25 SS 25 SS 25 SS 25 SS 32 SS 32 SS Not required

Heat Exchanger 50 Alu-SS 50 Alu-SS

K Flexible Swept Bend in Stainless Steel, c/- Unions 1 1/4” 1 1/4” 1 1/4" 1 1/4" 1 1/4" 1 1/4" 2" 2"

Detailed System Components

Not required - water cooled

pumping power

• Complete bore pumping and control system

• Designed and configured by the manufacturer

• Delivered complete • Everything you need for

DIY installation.

Scan here to go to the easy selection guide at capsub.com.au

Scan here

Caprari Pumps Australia has it covered

Not independently required - Flexibore is designed to suspend the pump >