+ All Categories
Home > Documents > Valkokankaat_Kingpin Screens

Valkokankaat_Kingpin Screens

Date post: 15-Feb-2016
Category:
Upload: altavox-infotainment-ab
View: 222 times
Download: 0 times
Share this document with a friend
Description:
Tilaa: [email protected] / [email protected] Tuotteet: Sähkömoottori- ja manuaali-valkokankaat Tab Tension -valkokankaat Velvet Frame Screen -pingotetut valkokankaat Pull-Up ja Tripod -valkokankaat Projektoritelineet (Valkoinen/Musta/Hopea) RF-kytkin projektorille Lisäksi: MAX valkokankaat max 8m x 5 m
Popular Tags:
9
KINGPIN SCREENS PRODUCTS 2012
Transcript
Page 1: Valkokankaat_Kingpin Screens

Kingpin ScreenS ProducTs

2012

Page 2: Valkokankaat_Kingpin Screens

Business 16:10 format

Square 1:1 format

Electric screen

For mounting on wall or to the ceiling

Wide 16:9format

Remote control KP300included

For mounting on the wall

Video 4:3format

Manual, hand operated screen

The optimal viewing angle (in degrees)

Suitable for home cinema

Portable screen with case

The quantity of light reflected from the screen

Flame resistant

Suitable for public environment

Cinema wide 2,35:1 format

Business 16:10 format

Square 1:1 format

Electric screen

For mounting on wall or to the ceiling

Wide 16:9format

Remote control KP300included

For mounting on the wall

Video 4:3format

Manual, hand operated screen

The optimal viewing angle (in degrees)

Suitable for home cinema

Portable screen with case

The quantity of light reflected from the screen

Flame resistant

Suitable for public environment

Cinema wide 2,35:1 format

Big screen- Big enjoymenT!To get as close to reality as possible in terms of light, colors and contrast ratio, you need a projection

screen of high quality. Kingpin Screens offers you a variety of models: Electric, manual, pull up and

frame screens, for large-scale movie nights or for the conference room. All screens are easy to install

and use with your home theater or computer equipment. No matter what your needs are and what

option you choose, we guarantee a screen that can handle the requirements of excellent image quality

at an appealing price.

sizeTo find out what size to have you can project the image on the place where you intend to have the screen. Another way is to divide the distance from where you are sitting and the placement of the screen in two to get the width of the screen. example: if you are sitting four meters from the screen the veiwing area should be about two meters wide.

FormATThe most common formats are 16:9 and 1:1. The figures represent the width of the viewing area in relation to the height. We advice you to have the same format on the screen as the projector’s standard format.1:1 this format is usually used in conference rooms.4:3 is the old TV format that some computers use.16:9 is widescreen and the format that most TVs use today.16:10 is the new business format for projectors and laptops.2.35:1 is the format used in cinemas and it’s the original format of most movies.

gAingain describes how much light the screen reflects in proportion to the amount of light projected onto the screen. 1,0 gain is the most common value, then the screen reflects as much light as is projected onto it.

conTrAsTTo get the best blackness and to increase the contrast ratio, we have a black border around the viewing area on the screens (except for the 1:1 format screens). The result is a significantly better viewing experience.

good To KnoW:

Page 3: Valkokankaat_Kingpin Screens

TAB TenSiOn – our FLATTesT screen...eVer...

TAB Tension screen (TAB)

This is our latest development and the flattest screen in the rolled screen range. Cords in the sides are spanning the fabric horizontally, while a heavy bottombar spans it vertically. The clever design gives the screen the same high image quality as a frame screen, but can easily be rolled up after use.

Screens of this kind often have large and unwieldy casings. Therefore we have designed our own version, only 12.5 cm in height, elegant and subtile in its design. The wall/ceiling mounts are easily mounted by one person, if you like to mount the screen in a rail system it works fine.

Kingpins KP300 control system is included. You will find detailed information on page 7-8 of how to control the screen.

TECHniCAL SPECiFiCATion: TAB TEnSion SCREEn

Art.nb. Size Format Gain Fabrics- Black Black- Viewing Length Height Depth Weight (inch) matte size (mm) borders drop area cassette cassette cassette (kg) white (mm) (mm) (mm) (mm) (mm) (mm)

TAB210-16:9 90” 16:9 1,0 2300x1885 50-150 180-380 2000x1125 2430 125 110 16TAB210-16:10 93” 16:10 1,0 2300x2010 50-150 180-380 2000x1250 2430 125 110 16

TAB240-16:9 104” 16:9 1,0 2600x2054 50-150 180-380 2300x1294 2730 125 110 18TAB240-16:10 107” 16:10 1,0 2600x2198 50-150 180-380 2300x1438 2730 125 110 18

TAB270-16:9 117” 16:9 1,0 2900x2222 50-150 180-380 2600x1462 3030 125 110 20 TAB270-16:10 121” 16:10 1,0 2900x2385 50-150 180-380 2600x1625 3030 125 110 20

TAB300-16:9 131” 16:9 1,0 3200x2391 50-150 180-380 2900x1631 3330 125 110 24TAB300-16:10 135” 16:10 1,0 3200x2572 50-150 180-380 2900x1812 3330 125 110 24

TAB330-16:9 145” 16:9 1,0 3500x2560 50-150 180-380 3200x1800 3630 125 110 26TAB330-16:10 149” 16:10 1,0 3500x2760 50-150 180-380 3200x2000 3630 125 110 26

Page 4: Valkokankaat_Kingpin Screens

VeLVeT – THe VeLVeT FrAme ABsorBs reFLecTions

crOWn – our mosT PoPuLAr Home cinemA screen

VeLVeT FrAme screen (VFs)

Frame screen for optimal imaging. The aluminum frame is covered with velvet, a material which effectively prevents disruptive reflections. The angle towards the screen is 45 degrees, which also prevents reflections bouncing at the screen. Recommended for all movie enthusiasts who wants to have perfect color and contrast ratio on a guaranteed wave free screen. For the true enthusiast seeking the ultimate cinematic experience at home this screen also comes in the movie format 2.35:1.

Our best seller, perfect for those with a taste for smart functions and exclusive materials. Crown is a motorized projection screen where the screen fabric comes out in the front of the casing. This means that there will be a gap of about seven cm between the wall and the screen, which makes it possible to mount the screen on the wall but the fabric will still go down in front of both paintings and whiteboards etc.

The fabric is made of glass fiber, a rigid and durable material that stands up very well over time. The motor has built in adjustment for end position, adjustable with great precision. Thanks to the motor operation you don´t have problems with ”drag- and release damages” that may occur over time on manual screens. To be mounted in the ceiling or on the wall.

Kingpins KP300 control system is included. You will find detailed information on page 7-8 of how to control the screen.

crOWn eLecTric screen (ces)

TECHniCAL SPECiFiCATion: VELVET FRAME SCREEn

Art.nb. Size Format Gain Fabrics Black Black- Viewing Length Height Depth Weight (inch) matte size borders drop area cassette cassette cassette (kg) white (mm) (mm) (mm) (mm) (mm) (mm) (mm)

TECHniCAL SPECiFiCATion: CRoWn ELECTRiC SCREEn

Art.nb. Size Format Gain Fabrics Black Black- Viewing Length Height Depth Weight (inch) matte size borders drop area (mm) cassette cassette cassette (kg) white (mm) (mm) (mm) (mm) (mm) (mm)

VFS150-4:3 69” 4:3 1,0 1567x1217 83,4 0 1400x1050 1567 1217 26 7,5VFS150-16:9 63” 16:9 1,0 1567x956 83,4 0 1400x788 1567 954 26 6,5

VFS180-4:3 84” 4:3 1,0 1867x1442 83,4 0 1700x1275 1867 1442 26 8,5 VFS180-16:9 77” 16:9 1,0 1867x1124 83,4 0 1700x956 1867 1123 26 7,5

VFS210-4:3 98” 4:3 1,0 2167x1667 83,4 0 2000x1500 2167 1667 26 10,5 VFS210-16:9 90” 16:9 1,0 2167x1293 83,4 0 2000x1125 2167 1292 26 9

VFS240-4:3 113” 4:3 1,0 2467x1892 83,4 0 2300x1725 2467 1892 26 12VFS240-16:9 104” 16:9 1,0 2467x1462 83,4 0 2300x1294 2467 1462 26 10VFS240-2,35:1 98” 2,35:1 1,0 2467x1146 83,4 0 2300x979 2467 1146 26 9,5

VFS270-4:3 128” 4:3 1,0 2767x2117 83,4 0 2600x1950 2767 2117 26 13,5 VFS270-16:9 117” 16:9 1,0 2767x1629 83,4 0 2600x1462 2767 1629 26 12VFS270-2,35:1 111” 2,35:1 1,0 2767x1273 83,4 0 2600x1106 2767 1273 26 11,5

VFS300-4:3 143” 4:3 1,0 3067x2342 83,4 0 2900x2175 3067 2342 26 15VFS300-16:9 131” 16:9 1,0 3067x1798 83,4 0 2900x1631 3067 1798 26 13,5

VFS400-16:9 176” 16:9 1,0 4067x2361 83,4 0 3900x2194 4067 2361 26 39

CES150-4:3 69” 4:3 1,0 1500x1900 50 600 1400x1050 1610 103 97 8CES150-16:9 63” 16:9 1,0 1500x1638 50 600 1400x788 1610 103 97 8

CES180-4:3 84” 4:3 1,0 1800x1925 50 600 1700x1275 1910 103 97 9 CES180-16:9 77” 16:9 1,0 1800x1829 50 600 1700x956 1910 103 97 9

CES210-4:3 98” 4:3 1,0 2100x2134 50 400 2000x1500 2210 103 97 10CES210-16:9 90” 16:9 1,0 2100x1975 50 600 2000x1125 2210 103 97 10

CES240-4:3 113” 4:3 1,0 2400x2375 50 400 2300x1725 2510 103 97 11CES240-16:9 104” 16:9 1,0 2400x1940 50 400 2300x1294 2510 103 97 11

CES270-4:3 128” 4:3 1,0 2700x2380 50 200 2600x1950 2810 103 97 12CES270-16:9 117” 16:9 1,0 2700x1913 50 200 2600x1463 2810 103 97 12

Page 5: Valkokankaat_Kingpin Screens

KP 500

5 eAsy WAys To conTroL your eLecTric screen

1. rF sTAndArd 2. ProgrAmmABLe ir 3. 12V Trigger 4. conTroL sysTem Line-ir

KP 300 If your projector has a 12 volt trigger output, you can

connect it with the control box. The screen goes down when you turn on the projector and it goes up when you turn it off.

KP 300 If you want to control your screen with an IR- or

universal remote control you can program the control box via the IR-eye. Most IR-remote controls works with KP300.

KP 300 A RF remote control is included with your electric

screen. This is programmed to work with the control box and is the most common way to control your screen.

KP 300 If you have a control system like Crestron, Extron,

Neets, AMX or similar, you can connect it via Line IR and control the screen with the default codes.

CONTROL BOX KP300

CONTROL SYSTEM

CONTROL BOX KP300

PROJECTOR

CONTROL BOX KP300

UNIVERSAL REMOTE CONTROL

CONTROL BOX KP300

REMOTE CONTROL

All Kingpins electric screens have a very competent control system as standard.

When you buy your screen everything is already assembled and ready to plug into

the power socket. You do not need to get help from an electrician to make it work.

Plug & Play!

A RF-remote control to run the screen is included. RF-signals do not need to have

optical contact with the receiver, therefore,

you can hide the control box away if wanted

(fig. 1).

Would you rather control with a multi

remote control or an IR remote? Then use the

built-in IR eye that are placed in the control box.

IR codes are programmed by default, you can also

use your own codes (fig. 2).

The control box is easy to program, see operation guide.

If you want to connect your Kingpin screen to a larger control system, such as

Crestron or Extron, you´ll do it by the line-IR input. Here you can also connect more

basic control systems like Neets, AMX or similar. Copy the IR codes that are default

into the control system and start immediately. See operation guide for detailed

instructions (fig. 4).

Many projectors have a 12-volt trigger output, here you can connect a cable directly

into the control box. When you start the projector, the screen goes down automati-

cally, and when you turn it off the screen goes back up (fig. 3). It could not be easier!

If your projector does not have the 12-volt trigger we have an accessory as an

option, KP500. It sends a RF-signal to the control box when the projector is turned

on and the screen goes down. When the projector is turned off it sends a new

RF-signal and the screen goes back up. The box is connected between the power

socket and the projector.

conTroL sysTem!

WiTH KP 500 you cAn conTroL THe screen WireLess!

KP 500 If you like to have a wireless and fully automatic control of your screen, you can connect the KP500 between the projector and the power socket.

KP500 recognizes when the projector consumes power, then it sends out a RF-signal to the control box that sends the screen down. When the projector is turned off the screen goes back up, all automatically. no remote control needed!

PROJECTOR

CONTROL BOX KP300

KP500

Page 6: Valkokankaat_Kingpin Screens

eLLipSe eLecTric screen (ees)

The Ellipse screen is ready to connect to the power socket and use without installation of an electrician. The screen is easily mounted by one person and can be mounted either to the wall or the ceiling. The mounting device is compatible with most rail systems, which made the Ellipse a favorite in public enviroments. The name comes from the ellipse shaped casing, sleek and discreet in its design.

The fabric is made of glass fiber, a rigid and durable material that stands up very well over time. The motor has built in adjustment for end position, adjustable with great precision. Thanks to the motor operation you don´t have problems with ”drag- and release damages” that may occur over time on a manual screen.

Kingpins KP300 control system is included. You will find detailed information on page 7-8 of how to control the screen.

eLLipSe – QuicK mounTing WiTH PLug & PLAy

TECHniCAL SPECiFiCATion: ELLiPSE ELECTRiC SCREEn

Art.nb. Size Format Gain Fabrics Black Black- Viewing Length Height Depth Weight (inch) matte size borders drop area (mm) cassette cassette cassette (kg) white (mm) (mm) (mm) (mm) (mm) (mm)

EES180-1:1 100” 1:1 1,0 1800x2650 0 0 1800x2400 1914 105 93 9EES180-16:10 79” 16:10 1,0 1800x1938 50 600 1700x1063 1914 105 93 9

EES210-1:1 117” 1:1 1,0 2100x2650 0 0 2100x2400 2214 105 93 10EES210-16:10 93” 16:10 1,0 2100x2125 50 600 2000x1250 2214 105 93 10

EES240-1:1 134” 1:1 1,0 2400x2650 0 0 2400x2400 2514 105 93 11EES240-16:10 107” 16:10 1,0 2400x2313 50 600 2300x1438 2514 105 93 11

EES300-1:1 167” 1:1 1,0 3000x3200 0 0 3000x3000 3114 105 93 16

Page 7: Valkokankaat_Kingpin Screens

LiTe mAnuAL screen (Lms)

A basic screen with a small and discreet casing made of extruded aluminum. The sleek design fits modern homes as well as public environments. The mounting system is easy to use and compatible with most rail systems on the market. The screen can be mounted on the wall or in the ceiling and comes in a variety of formats; 1:1, 4:3, 16:9 and 16:10. A simple but yet sturdy screen for those who do not want to save on other things than money.

LiTe – A BAsic And roBusT

screen WiTH A smALL cAsing

TRiPoD – eAsy To Bring, in QuALiTy THAT LAsTs

TripOD screen (Ts)

Portable screen with classic tripod of robust construction that can stand the strain that mobile use may cause. The adjustable arm makes it easy to get the screen at a comfortable height. Tripod is perfect for the traveling businessman, when space is limited or when you for any other reason can not have a screen mounted on the wall. Take it home for the weekend for a great movie experience.

pULL Up screen (Ps)

Portable screen with a robust construction, designed to handle the extra damage that mobile use sometimes brings. The screen is quick to set up and ready to use in seconds. Pull Up is perfect for the traveling businessman, when space is limited or when you for any other reason can not have a screen mounted on the wall. Equipped with gas damper for precise height adjustment.

PULL UP – reAdy To use in A FeW seconds

TECHniCAL SPECiFiCATion: LiTE MAnUAL SCREEn

Art.nb. Size Format Gain Fabrics Black Black- Viewing Lenght Height Depth Weight (inch) matte size borders drop area (mm) cassette cassette cassette (kg) white (mm) (mm) (mm) (mm) (mm) (mm)

TECHniCAL SPECiFiKATion: TRiPoD SCREEn

Art.nb Size Format Gain Fabrics Black Black- Viewing Legnth Height Depth Height screen Weight (inch) matte size borders drop area (mm) cassette cassette cassette min/max (kg) white (mm) (mm) (mm) (mm) (mm) (mm) (mm)

TECHniCAL SPECiFiCATion: PULL UP SCREEn

Art.nb. Size Format Gain Fabrics Black Black- Viewing Legnth Height Depth Weight (inch) matte size borders drop area (mm) cassette cassette cassette (kg) white (mm) (mm) (mm) (mm) (mm) (mm)

LMS150-4:3 69” 4:3 1,0 1500x1900 50 600 1400x1050 1614 98 85 5LMS150-16:9 63” 16:9 1,0 1500x1638 50 600 1400x788 1614 98 85 5

LMS180-1:1 100” 1:1 1,0 1800x2050 0 0 1800x1800 1914 98 85 6LMS180-4:3 84” 4:3 1,0 1800x1925 50 600 1700x1275 1914 98 85 6LMS180-16:9 77” 16:9 1,0 1800x1829 50 600 1700x956 1914 98 85 6LMS180-16:10 79” 16:10 1,0 1800x1938 50 600 1700x1063 1914 98 85 6

LMS210-1:1 117” 1:1 1,0 2100x2350 0 0 2100x2100 2214 98 85 8LMS210-4:3 98” 4:3 1,0 2100x2134 50 600 2000x1500 2214 98 85 8LMS210-16:9 90” 16:9 1,0 2100x1975 50 600 2000x1125 2214 98 85 8LMS210-16:10 93” 16:10 1,0 2100x2125 50 600 2000x1250 2214 98 85 8

LMS240-1:1 134” 1:1 1,0 2400x2650 0 0 2400x2400 2514 98 85 8,5LMS240-4:3 113” 4:3 1,0 2400x2133 50 150 2300x1725 2514 98 85 8,5LMS240-16:9 104” 16:9 1,0 2400x1828 50 250 2300x1294 2514 98 85 8,5LMS240-16:10 107” 16:10 1,0 2400x2133 50 400 2300x1438 2514 98 85 8,5

TS150-1:1 85” 1:1 1,1 1530x1530 0 0 1530x1530 1610 70 70 1400/2600 9TS180-1:1 100” 1:1 1,1 1800x1800 0 0 1800x1800 1880 70 70 1400/2600 11,5TS200-1:1 113” 1:1 1,1 2030x2030 0 0 2000x2000 2110 70 70 1400/2600 12

PS170-4:3 78” 4:3 1,1 1700x2000 40 745 1620x1215 1820 110 120 8,5PS170-16:9 73” 16:9 1,1 1700x2000 40 1050 1620x911 1820 110 120 8,5

PS200-4:3 97” 4:3 1,1 2050x2200 40 700 1970x1478 2180 110 120 11PS200-16:9 89” 16:9 1,1 2050x2200 40 1060 1970x1108 2180 110 120 11

Page 8: Valkokankaat_Kingpin Screens

VPM140-W

VPM140-S

VPM140-B VPM235W-S

prOJecTOr mounTs

Kingpin Screens have two series of mounts for the projectors: Vertical Projector Mount and Professional Projector Mount. All mounts over 20 cm are in silver, but the shorter mounts are available in silver, black and white. In the tube between the projector and the ceiling, the cables can be hidden for a neat installation with no visible cables. The mounts fits most of the projectors on the market and can handle loads of up to 15 kg. The most common varieties of screws to mount the projector are included in the accessories kit.

Can be tilted +/-15°

OUr SYMBOLS FOr prOJecTOr MOUnTS:

Max load onmount 15 kg

This mount can be longer/shorter

Can rotate 360° around it´s own axle

For mounting on the wall

Ceiling platter cantilt up to 45°

For mounting in the ceiling

Cable manage-ment system lets you hide cables

prOJecTOr MOUnTS –For BoTH Home AndPuBLic enVironmenT NOT

VPM140ONLY VPM235W

For WALL-mounTing

AVAiLABLe in 3 coLors!

prOFeSSiOnAL – eAsy

insTALLATion ALso For

sLoPing ceiLings

VerTicAL ProjecTor mounT (VPm)

prOFeSSiOnAL ProjecTor mounT (PPm)

Vertical is our series of shorter, slimmer mounts. Mounted either in the ceiling or the wall, depending on model. High quality, stylish design and easy installation at an affordable price. All mounts are available in silver, but the short (VPM140) is also available in black and white, allowing you to color match your projector.

Professional is a range of affordable universal mounts for projectors. The mount is easily mounted in the ceiling and have a good design with high quality. The roof plate swivels, allowing installation even in sloping ceilings. The tube between ceiling and projector have space to hide up to 6 cables.

TECHniCAL SPECiFiCATion: VERTiCAL PRoJECToR MoUnT

Art. nb VPM140-S/B/W VPM235-S VPM235W-S

Lenght arm 140 mm 235 mm 235 mmExtention N/A 235-310 mm 2 35-310 mmSwivel 360˚ 360˚ 360˚Horizontal/Vertical tilt 30˚ 30˚ 30˚Load capacity 15 kg 15 kg 15 kgNet/gross per unit 1,3/1,4 kg 1,6/1,7 kg 1,7/1,8 kgColour Silver/Black/White Silver Silver

TECHniCAL SPECiFiCATion: PRoFESSionAL PRoJECToR MoUnT

Art. nb. PPM300-S PPM500-S PPM700-S

Lenght arm 300 mm 500 mm 700 mmExtention 300-440 mm 500-750 mm 700-1170 mmSwivel 360˚ 360˚ 360˚Horizontal/Vertical tilt 30˚ 30˚ 30˚Ceiling tilt 45˚ 45˚ 45˚Load capacity 15 kg 15 kg 15 kgNet/gross per unit 1,8/1,9 kg 2,3/2,4 kg 2,7/2,8 kgColour Silver Silver Silver

Page 9: Valkokankaat_Kingpin Screens

Big iMpreSSiOnS

STO

RA

SY

ST

ER

more information about our products you can find on our website:www.kingpinscreens.com

KP Trading i Borås AB, Göteborgsvägen 8, 504 35 Borås, SWEDEN Phone +46 33 152290, Fax +46 33 152291


Recommended