Valopaa Product Catalogue Spring 2012

PRODUCT CATALOGUESPRING 2012

Product Catalogue 1/2012Version 3.0 / 24.2.2012© Valopaa Ltd.

ContentsLED technology Introduction 4 Light distribution 7

Street lighting 9 VP 1301 LED street light 10 VP 1302 LED street light 14 VP 1401 LED street light 16 VP 1402 LED street light 17 VP 2221 LED bridge light 18 VP 2223 LED bridge light 20 VP 3241 LED light for signposts 22 Roadside spotlighting 23

Area lighting 24 VP1301, VP1302 and VP3311 LED light fi xtures suitable for area lighting Ceiling lighting 27 LED light fi xtures for petrol stations 30 VP 2222 LED ceiling light 32 VP 2231 LED light fi xture 34

Spotlighting 37 VP 3111 LED spotlight 38 LED fl ood lights 40

Intelligent LED lighting 43 Intelligent system 44 VPS master unit 45 Intelligent VP LED light fi xtures 46

LED modules and modernization 49 VPM LED modules 50 VPD drivers 51 Modernization of light fi xtures 52 VP9202 light fi xture for retrofi t 53

Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com4

Valopaa Ltd. – a Finnish LED light fi xture producer

Valopaa Ltd. is a Finnish producer of LED light fi xtures, based in northern Finland. All Valopaa products are designed and manufactured in Fin-land, and have been granted the Finnish Key Flag origin mark (to state they are of Finnish origin).

Wide-ranging R&D know-howThe R&D team of Valopaa has a wide-ranging knowhow, including lighting and optics planning, electronic and software planning, mechanical plan-ning and industrial design.

The Valopaa products have been developed on Va-lopaa’s own modular product platform. When de-veloping products and the product platform, good lighting, high energy effi ciency, maintainability, reliability of the products, suitability to demanding environments and effi cient industrial manufacturing are of high importance. Patent applications have been fi led on the technical solutions of our product platform.

Production and cooperation networkThe Valopaa production consists of product assem-bly and SMD process. The Valopaa production has been audited by SGS Fimko, according to offi cial light fi xture production requirements. All manufac-tured products are tested (in-house) before pack-aging to ensure the high quality of the delivered products to our customers. We subcontract the production of mechanical parts, and purchase electronics and specialty

services from our cooperation network. The pro-duction network is mostly local (at our region). All production partners are ISO9001 certifi ed.

Valopaa uses a comprehensive ERP system. It collects detailed data that enables us to trace to which products a particular batch of material or intermediate product or modules have been used. With the ERP system, light fi xtures and all compo-nents used in them can be traced subsequently. Thereby, we are able to deliver products similar to the original delivery to our customer even years afterwards.

International research cooperationValopaa does research cooperation with VTT Tech-nical Research Center of Finland, Aalto University (incl. the Lighting Lab) and University of Oulu. Va-lopaa is also part of the ENLIGHT project, the new-est and widest ranging lighting research project in Europe. The project aims at developing future intelligent LED lighting solutions. The ENLIGHT consortium includes organizations across the light-ing industry, including many types of subcontrac-tors and the key lighting manufacturers; Valopaa, Philips and Osram.

Valopaa Ltd. Mäkelininkatu 15 90100 Oulu, Finland tel. +358 10 470 8890 www.valopaa.com 5

Cost effi ciency over life cycleCost effi ciency over life cycle means that the product in question is more inexpensive to the customer when total cost is calculated over the product life cycle, than alternative products available at the time of the pur-chase. The Valopaa products have not been developed to meet the lowest investment cost, but to achieve economic cost for the entire life cycle (usage years) of the product.

The cost effi ciency of Valopaa products arises from low energy usage, virtually nonexistent maintenance costs, long lifetime and maintainability that stems from the modular product structure and the ERP system.

Below you’ll fi nd two cost calculation examples with the following default values: Energy price 0,1 €/Kwh that rises 10% per year, annual interest rate 5%. The calculations are done with the calculation model pro-vided by the Illuminating Engineering Society of Finland (available in Finnish at www.valosto.com).

Example 1. Bicycle or walk way or a sports track illumination- Annual usage time of illumination 4500 hours- 30 years of usage time

Example 2. Petrol station canopy illumination

- Annual usage time of illumination 4500 hours- 25 years of usage time

Lifetime costs of illumination (current value) Lifetime costs of illumination (current value)


High quality, reliable and long-lastingThe reliability and long lifetime of LED light fi xtures is constructed by choosing the highest quality of LEDs, drivers, components and materials, by set-ting the stress on them at an appropriate level, and by designing the structures of the fi xture taking heat control into consideration.

LED componentsThere are numerous producers of LED compo-nents with varying levels of technical competence. Valopaa has chosen the LUXEON Rebel LEDs, by Philips Lumileds, as the LED components used in the VP LED light series. These LED components have high energy effi ciency, low scale and well-known lumen depreciation depending on the strain put on the LEDs, very low percentage of failure, good selection of available features, e.g. colour temperatures and binning that stay put over lifecy-cle, and comprehensive documentation based on extensive testing.

LED components can be constructed in different ways. LUXEON Rebel LEDs have one semiconduc-tor without internal connections, thereby having very reliable structure. Most LED components found on the market have many small LEDs with several internal connections; the more connec-tions and components, the greater the failure rate. These kind of LEDs also face increased failure due to uneven division of current between the internal small LEDs. The original producer of the internal small LEDs can vary.

LED drivers and componentsValopaa uses certifi ed LED drivers that have oper-ating temperature from -40˚C. Lifetime and reli-ability data is available for the drivers. The data is reported with certain strain in certain temperature. The light fi xtures are designed to keep the tem-perature at low levels to ensure the specifi ed long lifetime.

Structure of light fi xturesFailure rate of LEDs, drivers and all electronics doubles (on average) when the temperature of the light fi xtures increases by 10˚C. Therefore heat con-trol is essential factor in reliability of a light fi xture.

With the Valopaa products, the produced heat is transferred to the ambient air with the aluminum structures of the fi xtures. When necessary, driver is situated separately from the LED structures to obtain the adequate lifetime. For example, locat-ing the driver away from the heat generated by the LEDs, decreases the temperature of the driver over 20˚C, thus making the failure interval four times longer than if the driver was located in the same structure with the LEDs.

The mechanical parts of the light fi xture are made of materials that are strong enough, durable against time and hard environments, such as alumi-num and stainless steel.

MaintainabilityAll Valopaa products are based on the same modules, which are changeable on-site or at depot depending on the product and the mechanic. The amount of spare parts is low because different VP products use the same components and modules. Every VPM module has a serial number. Essential features, colour temperature (bin), lumen output and optics, are traceable with the serial number of the LED module, and therefore the equivalence of the spare part can be ensured.


Light distributionWe develop new optical structures based on the customer feedback. In the VP led light fi xtures, every led module has its own optical lens that produces the desired distrubution of luminous intensity. The Eulumdat fi les of light distribution can be downloaded from the Valopaa website.

Lens V11. Developed especially for lighting of narrow streets. Best applicable for pedestrian streets and roads at residential areas, where light pollution is avoided.

Lens V12. Developed especially for lighting of wide streets. Asym-metric light distribution produces a more even light to the street and less glare. Well suitable also for lighting of parking areas.

Lens V8. Developed especially for general lighting. Thus, it is suitable to lighting of e.g. industrial halls, parking areas and underpasses. Light beam 90°, 600 cd/module.

Lens V9. Developed especially for general lighting. Lambertial light distribution, 200 cd/module.

Lens V7. Developed for use in spotlighting and accent lighting. Light beam 20°, 5000 cd/module.

Lens V10. Developed especially for accent and spotlighting. Light beam 35°, 2000 cd/module.

Lens V13. Developed especially for lighting of signs and bill-boards.

Lens V9B. Developed especially for ceiling lighting. Well suited also for general lighting, for indoors as well as outdoors. The lens has been designed to mini-mize glare when light fi xtures are installed to low ceilings.

Lens V9C. Developed especially for general lighting, and is thus well suited for garden and park lighting. It is also well suited for retrofi t installations. The lens generates very wide round light beam.

Optics for street lighting

Optics for general lighting

Optics for spotlighting

Specialty optics

We reserve the right to make changes.


A bicycle and walkway in Virpiniemi has been illuminated with the VP1302 M2 LED street light fi xtures. The pathway is very popular amongst rollerskaters, joggers and bicyclists.

LED

STRE

ET LIG

HTIN

G


LED

STR

EE

T LI

GH

TIN

G

LED street light fi xturesThe Valopaa product range has comprehensive assortment of light fi xtures suitable for the illumination of street environments. In addition to LED street lights (those installed on top of a pole), the product range includes bridge lights and spotlights. With the Valopaa products the street environment can be illuminated in all aspects, including e.g. roundabouts, and spot and accent lighting of the nature and art at roadsides. The VP LED street lights are also available with the intelligent LED lighting system.

Valopaa designs also customer-specifi c products, e.g. modernization of historical light fi xtures with LED technology and customized spotlighting products with colorful light. Read more about modernization on page 50, and spot and accent lighting on pages 35-39.

Customer benefi ts:• Cost effi cient over lifecycle – inexpensive alternative when calculated for long-term usage. - Energy effi ciency – latest LED technology with best available lumen / power ratio. - Minimal need for maintenance and easy upkeep – no need to change lamps, standard modules available as spare parts. - Long lifetime – Typically 100 000 hours with only 10% of lumen depreciation (with 350 mA LED current). - Reliability - designed to work in demanding environments.• Short pay-back time - Usually 4-5 years but could be only 2 years.• Does not collect snow due to product design, and the products don’t have cooling ribs that would collect dirt.• Insects don’t get burned to the light fi xture, because it doesn’t heat up too much.

LED street lights to replace mercury vapor lamps

Conventional mercury vapor lamps can most often be replaced with VP led street light fi xtures utilizing the existing lighting poles. For example, 125W mercury vapor lamps can be (in most cases) replaced with 2-3-module Valopaa street lights, and 250W mercury vapor lamps can be (in most cases) replaced with 5-6-module Valopaa street lights. It is, however, always a good idea to check the compliance with a lighting-class by lighting calculations on a case by case basis.

There are two choices of optics for street lighting. Lens V12 is specially designed for replacement of mercury vapor lamps, and is suitable for e.g. automobile roads and wider streets. Similarly, the lens V11 is ideal for pedestrian and bicycle routes, sports tracks and residential streets. In addition, the Valopaa products are available in a variety of general and spot lighting optics, which can be used in street lighting, e.g. in bridge lighting, and illumination of the street environment. See all the optics-options offered by Valopaa on page 7. Light distribution fi les can be downloaded from the Valopaa website.


VP 1301 M5

VP 1301 M6

VP 1301 M7

VP 1301 M8

VP 1301 M10

VP1301 M12

VP1301 M14

VP1301 M16

Operating voltage 230VAC/50Hz, protection class I

Input power (350 mA) (1)Useful quantity of light

51 W 58 W 68 W 76 W 93 W 110 W 128 W 144 W

4150 lm 5000 lm 5800 lm 6650 lm 8300 lm 9950 lm 11650 lm 13300 lm

Input power (700 mA) (2)Useful quantity of light

99 W 117 W 135 W 154 W

7350 lm 8800 lm 10300 lm 11750 lm

Power ratio According to standard EN 61000-3-2.

Colour temperature of the light

4100 K. Customer-specifi c colour temperatures possible, with limitations from the LED manufacturer.

Encapsulation IP65 (installed)

Operating temperature -40…+40 °C (-40…+100 F)

Measurements, w x l x h 620 x 170 x 125 mm 630 x 170 x 125 mm 620 x 223 x 125 mm 630 x 223 x 125 mm

Weight 5 Kg 5,5 Kg 6,5 Kg 7 Kg

Materials Metalwork painted (stoved) aluminium and stainless steel

Colour White or grey, other colours possible

Fastening Ø 59-63 mm tube, vertical and horizontal installation, fi ne-tuning in 5° steps. Without hinge only horizontal installation. Wiring with spring coupling, overhead cables also possible.

Connection 3 x 4 mm2 –o

LED lumen maintenance Typically less than 10%/100 000 h (1), 20%/100 000 h (2)

VP 1301 LED street light fi xtureThe product family of VP1301 street lights has been developed for street and slow traffi c road lighting. The light fi xture is suited for new installations, as well as for replacement of old light fi xtures. The light fi xture can be installed to both horizontal and vertical shaft. The installation angle can be adjusted in 5° steps with the help of the hinge, which makes the light fi xture fi t to existing pole and shaft structures. Also available a stripped-down version without the hinge that can be installed only to horizontal shaft. The VP1301 product family includes light fi xtures with the quantity of light ranging from about 4 000 lumen to 13 000 lumen. In addition to street lighting, the light fi xture is also suitable to area lighting.

Technical properties

There are two sizes available of the VP1301 LED street light: versions M5 to M8 have their modules in one row, and version M10 and up have their modules in two rows.

LED

STRE

ET LIG

HTIN

G



LED

STR

EE

T LI

GH

TIN

G

References

The VP1301 LED light fi xture is used in both street and area lighting. The pictures present the area lighting at an industrial estate in Oulu, Finland.

Street lighting is the most typical application for the VP1301 LED light fi xture. Street lighting at a residential area in Kiiminki, Finland.


VP 1301i - intelligent street lightingThe VP1301 LED street light fi xture is also available with the intelligent lighting system. The quantity of light can be adjusted according to needs. The light fi xtures are managed by a master unit via radio com-munication. Controlling can be based on time or calendar, or it can react to motion and brightness of the environment. Each light fi xture independently manages compensating the fading of the LED compo-nents. Control values of the light fi xtures and the master unit, such as desired quantity of light and the change patterns, are defi ned with a separate device via radio communication. With this new technology, lighting can be managed to save energy and adapt to the environ-ment.

VP 1301i M5 VP 1301i M6 VP 1301i M7 VP 1301i M8


Quantity of light (1)Input power (with 500 mA LED current)

1450-5500 lm 1750-6600 lm 2050-7700 lm 2300-8800 lm

69 W 82 W 98 W 108 W

Quantity of light (2)Input power (with 700 mA LED current)

1500-7350 lm 1800-8800 lm 2100-10300 lm 2400-11750 lm

99 W 117 W 135 W 154 W




Encapsulation IP65 (installed)


Measurements, w x l x h 620 x 170 x 125 mm 630 x 170 x 125 mm

Weight 5 Kg 5,5 Kg


Colour White or grey, other colours possible

Fastening Ø 59-63 mm tube, vertical and horizontal installation, fi ne-tuning in 5° steps. Without hinge only horizontal installation. Wiring with spring coupling, overhead cables also possible.


LED lumen maintenance The intelligent lighting system compensates the lumen depreciation. (Pat. Pend.)


LED

STRE

ET LIG

HTIN

G



LED

STR

EE

T LI

GH

TIN

G

References

The City of Oulu, together with the local energy company, has initiated a street lighting test site with multiple new street light fi xtures from differ-ent manufacturers. Valopaa has delivered VP1301i M6 intelligent LED street light fi xtures to the test site. In addition to excellent illumination, the intelligent light fi xtures are very energy effi cient - which is the main point of the testing project.


VP1302 M2 VP1302 M3 VP1302 M4 VP1302 M5 VP1302 M6VP1302 M2+M6

VP1302 M6+M6


Input power 22 W 30 W 39 W 51 W 58 W 76 W 110 W

Useful quantity of light 1600 lm 2500 lm 3300 lm 4150 lm 5000 lm 1600 lm + 5000 lm

5000 lm + 5000 lm

Power ratio > 0,9c According to standard EN 61000-3-2.

Colour temperature ofthe light


Encapsulation IP65


Measurements, w x l x hVisor:Pole adaptor:

228 x 172 x 50

281 x 172 x 50

334 x 172 x 50

387 x 172 x 50

440 x 172 x 50

h 420, Ø 80

Materials Metalwork painted (stoved) aluminium and stainless steel.

Colour Black, white or grey, other colours possible.

Fastening 60 mm tube, vertical (and horizontal) installation, fi ne-tuning in 5° steps.


LED lumen maintenance Typically less than 10%/100 000 h

VP 1302 LED street lightThe product family of VP1302 street lights has been developed for street lighting, as well as area lighting. In addition, the light fi xture is also suitable to e.g. lighting of sports tracks. The light fi xture is available in both one-sided and two-sided versions, thus making it possible to vary the light fi xture type within the lighted area to carry out fi rst-class lighting plans. The light fi xture is suited for new installations, as well as for replacement of old light fi xtures. The light fi xture can be installed to an up-right pole, the one-sided version also to horizontal shaft. The installation angle can be adjusted in 5° steps with the help of the hinge, which makes the light fi xture fi t to existing pole and shaft structures.


NB! Light fi xtures are available in one-sided and two-sided versions, and in all different combinations in addition to those presented in the table above.

The VP1302 LED street light fi xture is available in one-sided andtwo-sided versions, and in all different combinations.

LED

STRE

ET LIG

HTIN

G



LED

STR

EE

T LI

GH

TIN

G

References

The VP1302 LED light fi xture is used in both street and area lighting. Parking area P1 at the Oulu Airport has been illu-minated with this light fi xture.

Case FinaviaDuring the Oulu Airport repara-tion and enlargement project, the parking lot and its lighting were renewed as well. Since the end of 2010, the P1-parking area, located directly in front of the terminal building, has been illuminated with Valopaa’s LED light fi xtures.

There are numerous reasons to use LED lights at the Oulu Air-port. Finavia’s electrical engineer, Oskari Moisio, says that the company wants to be a forerun-ner when it comes to technologi-cal advancement - this applies to illumination as well. That is why getting to know LED technology and the opportunities it has to offer is of great importance.

Finavia wants not only energy sav-ing but also high quality and cost effi cient solutions. According to Moisio, the airport’s parking area now has a white coloured light-ing of a high level – just what was expected. The fact that Valopaa could present the cost estimate for the whole life cycle was of great importance. The calcula-tions show that a slightly bigger investment will be paid back over time, thanks to smaller mainte-nance costs.


New!

VP 1401 LED street light fi xtureVP1401 LED light fi xtures have been developed for street lighting. The fi xtures can also be used as a high bay light fi xture in industrial lighting by selecting a suitable optical distribution. The light fi xtures are mounted to a wire rope over a road, or at an indus-trial hall to wire robe or directly to ceiling with an adaptor (available as accessory). The VP1401 LED light fi xtures are available in different output capacities, and as part of the intelligent LED lighting system of Valopaa.

VP 1401 M4 (1) VP 1401 M4 (2) VP 1401 M8 (1) VP 1401 M8 (2) VP 1401i M8


Input power 39 W 81 W 76 W / 73 W 154W / 144 W Max 154W / max 145 W

Useful quantity of light(lens V11, V12 / other)

3300 lm / 3600 lm

5900 lm / 6400 lm

6650 lm / 7200 lm

11750 lm / 12800 lm

2400 - 11750 lm /2500 - 12800 lm




Encapsulation IP65


Measurements, w x l x h 575 x 301 x 209 / 321 mm


Colour Gray, other colours possible (in RAL)

Fastening To cable wire, or directly to roof with adaptor (sold as accessory)

Connection 3 x 4 mm2 –o–

LED lumen maintenance Typically less than 10%/100 000 h (1), 20%/100 000h (2). Compensated. (Pat. Pend.)


Different LED components are used with lenses V11 and V12 than with other lens options. Therefore, the input power and quantity of light are slightly different depending on the chosen lens.VP1401 LED light fi xtures are available with 350mA (1) or 700mA (2) LED current.

LED

STRE

ET LIG

HTIN

G


VP1402 M4 LED street light VP1402 M8 with 5° angle

New!

VP 1402 LED street light fi xtureVP1402 LED street light fi xtures have been developed to be installed to horizontal shaft. The pole adaptor is always the same direction with the shaft, but the visor part can be adjusted in 5° steps.

Available later on spring 2012!

VP 1402 M4 VP 1402i M4 VP 1402 M8 VP 1401i M8


Input power 39 W (1) / 81 W (2) Max 56 W 76 W (1) / 154 W (2) Max 154 W

Useful quantity of light(lens V11, V12 / other)

3300 lm (1) / 5900 lm (2)

1150 - 4400 lm 6650 lm (1) / 11750 lm (2)

2400 - 11750 lm




Encapsulation IP65


Measurements, w x l x h


Colour Gray, other colours possible (in RAL)

Fastening Ø 60 mm horizontal shaft, fi ne-tuning in 5° steps

Connection 3 x 4 mm2 –o–

LED lumen maintenance Typically less than 10%/100 000 h (1), 20%/100 000h (2). Compensated with i-versions (Pat. Pend.)


VP1402 LED street light fi xture is available in different versions with 350 mA (1) or 700 mA (2) LED current.

LED

STR

EE

T LI

GH

TIN

G


VP2221 M1 VP2221 M2 VP2221 M3 VP2221 M4 VP 2221 M6


Input power 11 W 22 W 33 W 44 W 55 W

Useful quantity of light 900 lm 1800 lm 2700 lm 3600 lm 5400 lm

Power ratio > 0,9c According to stan-dard EN 61000-3-2.



Encapsulation IP65


Measurements,w x l x h (mm)

S: 200 x 200 x 60 S: 400 x 200 x 60 600 x 430 x 56 600 x 430 x 56 600 x 430 x 56

L: 600 x 430 x 60 L: 600 x 430 x 60

Measurements of versions suitable with the fl ush mounting frame, see page 19.


Colour Standard colour is grey, other colours possible.

Fastening Screw fastening to roof material.

Connection 5 x 2,5mm2 –o–

LED lumen maintenance Typically less than 10%/100 000 h.

VP 2221 LED bridge light fi xtureThe product family of the VP2221 LED light fi xtures is designed for use as a ceiling fi xture in e.g. un-derpasses of walkways and roads, bridge undersides, parking garages, outdoor sheds and industrial buildings. The light fi xture is mounted in buried laying, where it is mounted to the slot in a way that only the exothermic panel and the light emitting lens of the LED modules are left visible under the ceiling structure. All the other parts of the light fi xture are situated inside the ceiling structure.


AccessoriesVandalism shield. Installed on top of the LED module and optical lens to protect against mischief and vandalism. Protects from spray paints and decreases the risk of mechanical strain and damage. UV protected polycarbonate. Seal and screws included in the package.

LED

STRE

ET LIG

HTIN

G



Flush mounting frameThe VP2221 LED light fi xtures can be installed to the underside of bridges with this fl ush mounting frame in new building bridge sites. With the aid of this installation case, the electrical tubing will be easier and wooden molds for the fi xtures are no longer needed. The frame has knockouts for M25 pipe fi tting on each side, in order to enable tubing in a simple way. Tha package contains 2 pieces of pipe fi ttings. The light fi xtures can be easily installed into the case after the bridge building is fi nished. Available in 3 sizes, suitable for each version of VP2221 led light fi xture.

Frame S Frame M Frame L

Measurements, w x l x h 204 x 204 x 128 mm 204 x 404 x 128 mm 304 x 504 x 128 mm

Materials Stainless steel



Frame S Frame M Frame L

Suitable versions of the VP2221 LED light fi xture

M1 M1, M2, M3 M1, M2, M3, M4, M6

Measurements, w x l 200 x 200 mm 200 x 400 mm 300 x 500 mm

Colour Aluminium

Suitable VP2221 LED light fi xtures:

The technical data is otherwise similar to that presented on page 18.

LED

STR

EE

T LI

GH

TIN

G


VP2223 M1 VP2223 M2 VP2223 M3 VP2223 M4


Input power 11 W 22 W 33 W 44 W

Useful quantity of light 900 lm 1800 lm 2700 lm 3600 lm

Power ratio > 0,9c



Encapsulation IP 44 (LED modules and driver min. IP65)


Measurements, w x l x h 200 x 200 x 47 400 x 200 x 47 400 x 200 x 47 400 x 400 x 47


Colour Black, grey and white, other colours possible.

Fastening Screw fastening to ceiling structure

Connection 5 x 2,5 mm2 –o–


VP 2223 LED bridge light fi xtureThe product family of the VP2223 LED light fi xture is designed for use as a ceiling fi xture in e.g. under-passes of walkways and roads, bridge undersides, tunnels, parking garages, outdoor sheds and industrial buildings. The light fi xture is mounted in surface mounting to the ceiling structure.


The VP2223 LED light fi xture is available in three different colors and in four different effi ciencies and sizes. Thelight fi xtures in the pictures are equipped with vandalism shields (available as accessories).

AccessoriesVandalism shield. Installed on top of the LED module and optical lens to protect against mischief and vandalism. Protects from spray paints and decreases the risk of mechanical strain and damage. UV protected polycarbonate. Seal and screws included in the package.

The front panel of the light fi xture is hinged to the back part, which is fastened to the ceiling structure. This makes it easier to install the light fi xture and make the electrical connections. Electrical cabling can be brought to the light fi xtures either from two sides or from the back, and the cabling can be chained.


LED

STRE

ET LIG

HTIN

G


VP2221 and VP2223 LED light fi xtures are used e.g. for lighting of underpasses.

LED

STR

EE

T LI

GH

TIN

G

References

At the Oulu highway (E75) all the bridge undersides are illuminated with VP2221 and VP2223 LED light fi xtures.

Case underpass lighting in Southwest FinlandTens of pedestrian and bicycle path underpasses across the Southwest Finland have obtained a bright and sustainable LED lighting. The new light fi xtures, produced and delivered by Valopaa, have replaced the mercury vapor lamps that in the past shed light on the course of cyclists and pedestrians. Valopaa LED light fi xtures have been installed in cities of Raisio, Mynämäki, Somero, Salo and Nousianen.

Installations were carried out by Raision Sähkö-INSTO Oy. The actual end-customer, however, was the Centre for Economic Development, Transport and the Environment of Southwest Finland, which is also responsible for maintenance of pedestrian and bicycle trails.

Marko Arvonen, the Department Manager of street lighting and installation services at Raision Sähkö-INSTO, says that Valopaa LED lights have fully came up to expectations. “We got what we ordered. Among other things, lighting intensities are in accordance with our wishes” he says.

According to Arvonen, the main reasons for the selecting the LED lights was the large amount of light derived from them and energy effi ciency of the lights, low level of maintenance, long lifetime and resistance to vandal-ism. In Marko Arvonen’s opinion, cooperation with Valopaa went very well during the entire installation project. “Valopaa’s service level was excellent according to our experience” he says.


VP3241 M1 VP3241 M2 VP3241 M3


Input power 11 W 22 W 33 W

Useful quantity of light 900 lm 1800 lm 2700 lm

Power ratio > 0,9c



Encapsulation LED modules and driver min. IP65, light fi xture when mounted IP33.



Measurements, w x l x h 290 x 225 x 130 mm

Materials Metalwork anodised or painted (stoved) aluminium and stainless steel.

Colour White (front panel of the change kit), other colours possible.

Suitable signpost 1-2 lines 3-4 lines 5-6 lines


VP3241 LED light fi xture for signpostsThe lighting of signposts can be implemented in an energy effi cient manner by using the modu-lar LED technology of Valopaa Ltd. The VP3241 LED light fi xture has solutions for both new installation sites and for modernization of old light fi xtures. The standard products comes with new case, thus being suitable for new installation and replacing old light fi xtures.

As for the modernization, Valopaa Ltd offers LED change kits for Elektroskandia’s model H-960 and Idman’s model 80722. The body of the light fi xture is preserved, and the change kit substi-tutes the old grid, lamp and refl ector, utilizing the points of attachment of the grid. The VP3241 LED light fi xture produces a more even light distribution than old mercury vapor lamps. Three different effi ciencies available.


In the pictures above the VP3241 LED change kit has been installed to Elektroskandia H-960 body. At the test site, the light fi xtures of the white signpost have two LED modules, and those of the blue signpost have three LED modules.


LED

STRE

ET LIG

HTIN

G


Roadside spot and accent lighting

There are several items at street surroundings that can be emphasized to create pleasant envi-ronment. For example, roundabouts and roadside vegetation and art can be illuminated with different spot and accent lighting products. Valopaa’s products are available with a variety of optics, for e.g. general and spot lighting in many different beam widths. Light fi xtures are also available as specialty products in different colors of LEDs, if colorful lighting is needed.

VP3311 LED fl ood light

VP3311 led light fi xtures have been developed to substitute halogen fl oodlights. By using different optical lenses the light fi xture is well suitable for spotlighting, area lighting and street lighting. The VP3311 led light fi xtures are of the same design family with VP1301 and VP1302 led light fi xtures. Using all these light fi xtures in the same lighting site one can create a uniform and pleasant lighting.

Detailed information on this product can be found from page 40.

VP3111 LED spotlight

VP3111 LED spotlight are small sized light fi xtures that can be installed on top of short lighting poles. They are available in 11W (1-module) and 22W (2-module) versions.


LED

STR

EE

T LI

GH

TIN

GTrees illuminated with VP3311 LED fl ood light at a roundabout.


LED area light fi xtures

LED

AR

EA

LIGH

TING

VP1302 LED light fi xture

The VP1302 street light fi xture has been developed for street lighting, as well as area lighting. The light fi xture can be equipped with different sized lighting modules (varying 2-6 LED modules per lighting module), and it is available in one-sided and two-sided versions. Thus, the light fi xture type can be varied within the lighted area to carry out fi rst-class lighting plans, e.g. to parking areas. The light fi xture can also be used to illuminate adjacent street and cycle paths from the same pole.



VP3311 LED light fi xtures have been developed to substitute halogen fl oodlights. By using different optical lenses the light fi xture is well suitable for spotlighting, area lighting and street lighting. The VP3311 LED light fi xtures are of the same design family with VP1301 and VP1302 LED light fi xtures. Using all these light fi xtures in the same lighting site one can create a uniform and pleasant lighting.



The VP1301 LED light fi xture is suitable for both street and area light-ing. It has been used in e.g. area lighting at industrial estates.


Valopaa’s LED lights can be used in several different locations by choosing suitable optics for the lighting site. For example, general lighting optics can be chosen for street light fi xtures, in which case they are suitable for area lighting.


LED

AR

EA

LIG

HTI

NG

The Toivola youth house in Helsinki, Finland has VP1302 LED light fi xtures at their yard. The light fi xtures endure vandalism well, so they are applicable in many different conditions.

The VP3311 LED light fi xture is suitable also for street lighting. It can be fastened e.g. to bridge structures.

References


LED

CE

ILING

LIGH

TING

Case Jätkänkynttilä bridge, RovaniemiThe famous Jätkänkynttilä bridge at Rovaniemi, Finland, got new illumination during fall 2011. The bridge is called “lumberjack’s candle” (=Jätkänkynttilä) because of its unique shape. The side beams of the bridge were earlier illuminated with old HQL light fi xtures, which were now replaced with LED light fi xtures from Valopaa. Now the lumberjack’s candle – that was the fi rst cable-stayed tuftform bridge in Finland when it was built in 1989 – looks even more magnifi cent and stands out from its surroundings.

The renewing of the lighting wasn’t though for aesthetic reasons, but for a much more ordinary reason. The engineer working at the Transport and Infrastructure area of responsibility at the Lapland Centre for Economic Development, Transport and the Environment, Risto Teppo, tells that an EU directive bans the HQL – mercury vapour – light fi xtures used at the bridge side beams from year 2015 onwards. The directive originates from energy saving objectives. This is why also the Lapland Centre for Economic Development, Transport and the Environment has started to replace the HQL light fi xtures gradually at different lighting sites.

“With this bridge we had an idea that we could try a new solution, and thus settled upon LED lighting”, he says.

The light fi xtures that were to be changed were situated at the outer side beam of the bridge, at a very diffi cult location to reach. Their maintenance always required using an elevating platform to lower the maintenance person next to the light fi xture. The LED light fi xtures were chosen specifi cally for the reason that they are reliable and have long life time, which reduces the need for maintenance work.

Suomen Sähkörakennus Oy operated as the contractor in this renovation project. The CEO Marko Rantamölö was pleased with the fact that Valopaa could tailor the new light fi xtures in a way that they could be installed to the same supports than the original light fi xtures. This facilitated the renovation project signifi cantly. Valopaa also determined the luminosity and lighting pattern that were ideal for the site.

Also Risto Teppo was satisfi ed with the results of the renovation project. For energy saving – which was the ultimate reason for the renovation – the LED light fi xtures are excellent. The original light fi xtures used at the Jätkänkynttilä bridge were 50W HQL light fi xtures. Now the lighting is implemented with 11 W LED light fi xtures that create even more pretentious illumination.


LED ceiling light fi xturesValopaa’s LED ceiling lighting products are designed for the needs of industry, as well as street lighting and architectural lighting. The products can easily be modifi ed for different applications with different optics.

Customer benefi ts:• Cost effi cient over lifecycle – inexpensive alternative when calculated for long-term usage. - Energy effi ciency – latest LED technology with best available lumen / power ratio. - Minimal need for maintenance and easy upkeep – no need to change lamps, standard modules available as spare parts. - Long lifetime – Typically 100 000 hours with only 10% of lumen depreciation (with 350 mA LED current). - Reliability - designed to work in demanding environments.• Insects don’t get burned to the light fi xture, because it doesn’t heat up too much.• Thermal management - a big aluminum front panel or the fi xture’s casing leads the generated heat away from the LEDs.• Ease of installation - simple electrical connection. The VP2221 and VP2321 recessed fi xtures come with an installation cable at which the fi xture hangs on at a suitable height during making the electrical connections. The cable facilitates the work of the mechanic by releasing his hands for making the electrical connections, as well as increases security.

VP2221 LED light fi xtures are popular both in bridge and underpass lighting, as well as at petrol stations’ canopy lighting.

LED

CE

ILIN

G L

IGH

TIN

G


LED ceiling light fi xtures

The product family of the VP2221 LED light fi xtures is designed for use as a ceiling fi xture in e.g. underpasses of walkways and roads, bridge undersides, parking garages, outdoor sheds and industrial buildings. The light fi xture is mounted in buried laying.

The product family of the VP2223 LED light fi xture is designed for use as a ceiling fi xture in e.g. underpasses of walkways and roads, bridge undersides, tunnels, park-ing garages, outdoor sheds and industrial buildings. The light fi xture is mounted in surface mounting to the ceiling structure.




LED

CE

ILING

LIGH

TING

VP2221 M1 VP2221 M2 VP2221 M3 VP2221 M4 VP 2221 M6

Input power 11 W 22 W 33 W 44 W 55 W

Useful quantity of light 900 lm 1800 lm 2700 lm 3600 lm 5400 lm

Measurements, w x l x h (mm)

S: 200 x 200 x 60 S: 400 x 200 x 60 600 x 430 x 56 600 x 430 x 56 600 x 430 x 56

L: 600 x 430 x 60 L: 600 x 430 x 60

VP2223 M1 VP2223 M2 VP2223 M3 VP2223 M4

Input power 11 W 22 W 33 W 44 W



200 x 200 x 47 400 x 200 x 47 400 x 200 x 47 400 x 400 x 47



VP1401 LED light fi xtures can be used in street lighting, or as a high bay light fi xture in industrial lighting. The light fi xtures are mounted to a wire rope over a road, or at an industrial hall to wire robe or directly to ceiling with an adaptor. The VP1401 LED light fi xtures are available in different output capacities, and as part of the intelligent LED lighting system of Valopaa.

VP1401 industrial LED light fi xture



VP2221 LED light fi xtures are suitable also for lighting at petrol stations.

LED

CE

ILIN

G L

IGH

TIN

G

References


VP2221 M4 VP2221 M6 VP2321 M8 VP2321i M4 VP2321i M6 VP2321i M8


Input power 44 W (1) / 75 W (2)

55 W (1) /109 W (2)

73 W (1) /144 W (2)

Max 53 W Max 110 W Max 145 W

Useful quantity of light 3600 lm (1) /6400 lm (2)

5400 lm (1) /9600 lm (2)

7200 lm (1) /12800 lm (2)

1150 -4800 lm

1800 - 9600 lm

2500 - 12800 lm




Encapsulation IP 65 IP 44 (led modules and driver min. IP65)


Measurements, w x l x h 600 x 430 x 60 590 x 390 x 80


Colour Grey, other colours possible (in RAL)

Fastening Screw fastening to roof material


LED lumen maintenance Typically less than 10%/100 000 h (1), 20%/100 000 h (2)

Compensated (Pat. Pend.)

LED light fi xtures for petrol stationsThe VP2221 and VP2321 LED light fi xtures are designed for use as a ceiling fi xture in e.g. out-door sheds and industrial buildings, and they are also suitable for canopy lighting at petrol stations. The light fi xtures are mounted in buried laying, where the fi xture is mounted to the slot in a way that only the exothermic panel and the LED modules are left visible under the ceiling structure. All the other parts of the light fi xture are situated inside the ceiling structure. Also available with the light fi xtures is a case that enables surface-mounting of the light fi xture.


VP2321i M8 LED light fi xture

AccessoriesInstallation case. The light fi xtures can be installed in surface-mounting with the help of this installation case.

LED

CE

ILING

LIGH

TING


VP2321i LED light fi xture with surface-mounting case

VP2221 M4, VP2221 M6 and VP2321 M8 versions available with 350 mA (1) and 700 mA (2) LED current.


LED

CE

ILIN

G L

IGH

TIN

G

References

Several Neste Oil petrol stations in Northern Finland have acquired the Valopaa intelligent LED lighting system for their canopy lighting. With the intelligent LED lighting system, the light intensity of all the light fi xtures in the system increases when a person arrives to the petrol station. The light intensity de-creases after a specifi ed time and at a spesifi ed speed after the person has left the area. At times when no one is at the petrol station’s area, the lighting levels stay at substantially lower levels, e.g. at 25% of the maximum input power. The intelligent LED lighting system enhances energy savings considerably.

Neste Oil Raahe Uimahallintie

Neste Oil Raahe Ouluntie


VP2222 M3 VP2222 M6 VP2222i M6


Input power 33 W 55 W Max 78 W

Useful quantity of light 2700 lm 5400 lm 1550 - 7200 lm




Encapsulation IP34 (LED modules and driver min. IP65) IP34 (LED modules IP65)




Colour Standard colour is white, other colours possible.

Fastening Screw fastening to roof or rail.


LED lumen maintenance Typically less than 10%/100 000 h. Compensated (Pat. Pend.)

VP 2222 LED ceiling light fi xtureVP2222 LED light fi xtures have been developed to be used as a ceiling light fi xture in cold roofedspaces or industrial spaces, where changing e.g. fl uorescent lamps is diffi cult and might interruptproduction. The light fi xtures are suited for new installations, as well as for replacement of old lightfi xtures. The light fi xture is supplied with a power cord that has a grounded electric plug. The cus-tomer can specify the length of the power cord according to their needs.

Now available also as an intelligent version, VP2222i M6, that comes with motion sensor and brightness sensor. See more information on the intelligent lighting system on page 43.


LED

CE

ILING

LIGH

TING


VP2222i M6

the

o as an intelligent version, VP2222i Mr. See more information on the intelligent lighting sy


LED

CE

ILIN

G L

IGH

TIN

G

References

VP2222 LED light fi xtures have been developed for industrial lighting, to be used in cold roofed spaces. At the Oulu Region, it’s been used e.g. in lighting at a loading platform.


VP2231


Input power 11 W

Useful quantity of light 900 lm

Power ratio > 0,9c



Encapsulation IP 44 (LED modules and driver min. IP65)


Measurements, w x l x h 180 (245) x 165 x 65 mm

Materials Metalwork anodised aluminium and stainless steel

Colour Standard colour is aluminium, other colours possible

Fastening Screw fastening to roof or wall material



VP2231 LED light fi xtureThe VP2231 LED light fi xtures have been developed to be used as a ceiling light fi xture and architectural light fi xture. The light fi xtures are suited for new installations, as well as for replacement of old light fi xtures. The light fi xtures can be chained in triphase. The VP2231 led ceiling light fi xture has one VPM2 led module, to which different optical distri-butions can be used.


LED

CE

ILING

LIGH

TING



The VP2231 LED light fi xture has been used in lighting of a wall surrounding the Raatti sports arena in Oulu, Finland.

LED

CE

ILIN

G L

IGH

TIN

G

References

Case Raatti StadiumThe renovators of the Raatti Stadium in Oulu were faced with a small surprise. A magnifi cent wall was to be built around the stadium area, and illuminated with special vandalism safe fl uorescent light fi xtures. However, the production of these so called wall washers had been discontinued. An-other solution needed to be found.

The answer came in the form of Valopaa’s LED light fi xtures. Jouko Hakala, installation manager at Lemminkäinen Talotekniikka Oy, took part to the renovation project. He had seen LED based solu-tion being used in accent lighting, and proposed trying that also for the Raatti Stadium. He contact-ed Valopaa Ltd. and asked if the company could provide LED light fi xtures for the site.

“Using LED light fi xtures required tailoring for having tri-phased chaining, among other things, to avoid installing unnecessary junction boxes”, states Hakala.

The test installation proved the Valopaa LED light fi xtures suitable for the illumination of the stadi-um wall. ”The lighting created a lively look to the white concrete wall and pure light. The fl uorescent subzero tube wasn’t able to highlight the surface of the wall the same way. The LED light fi xtures also save energy substantially. The input power of the originally planned light fi xture was 36W, when the chosen LED light fi xture has only 11W. In addition, the light fi xtures were wired in a way that with minor control arrangements it’s possible to have only every second light fi xture on”, Hakala explains.

There are 180 Valopaa LED light fi xtures installed at the wall. The fi xtures are situated at the under-side of a canopy element of the wall, illuminating downwards. The wall illumination is intended to create a visually imposing experience and also to prevent the concrete wall looking gloomy and grey during dark hours. The project was very successful. The wall, situated by the busy Tuira bridges, is highlighted and stands out nicely.


Illuminating a statue in Sotkamo, Finland. 2 pieces of VP3111 M2 LED spotlight fi xtures.

Yards, gardens and parks can be liven up with energy effi cient LED spotlights.LE

D SP

OTLIG

HTIN

G


LED spot and accent light fi xturesValopaa’s VP LED lights are energy effi cient solution for spot and accent lighting, since often 11W and 22W light fi xtures provide excellent spotlighting. VP LED spotlights are also suitable for area lighting, when wider beam optics is chosen.

Customer benefi ts:• Cost effi cient over lifecycle – inexpensive alternative when calculated for long-term usage - Energy effi ciency – latest LED technology with best available lumen / power ratio - Minimal need for maintenance and easy upkeep – no need to change lamps, standard modules available as spare parts - Long lifetime – Typically 100 000 hours with only 10% of lumen depreciation (with 350 mA LED current). - Reliability - designed to work in demanding environments• Optics - Light where you need it - The right optics can be chosen to each light fi xture according to the illuminated object. Valopaa’s range of optics has 9 different alternatives, and new optics can be developed as needed. - 20˚ and 35˚ light beams are available for spot and accent lighting. Thereby, the light is not spread too much on the environment, and the illuminated object stands out from its surroundings. - When needed, two different optics can also be chosen to the VP3111 M2 led spotlight fi xture. The fi xture’s LED modules can be directed vertically in different directions, so different light distributions may be needed to achieve optimal lighting.• The color temperature and color of light can be chosen (within LED producer’s range and availability). - Philips Lumileds’ LUXEON Rebel LED components are used in Valopaa’s VP LED light fi xtures. - When needed, colored LEDs can be used in spot and accent lighting. Valopaa’s LED lights have neutral white 4100K LED components in all standard products. Also other color temperatures (white light LEDs), and colors can be supplied as special products. Availability, delivery time and price should always be checked for special products. - The color rendering can also be increased up to 90 CRI (Ra) by selecting the suitable LEDs (however, this reduces the energy effi ciency).

Colours available in the LUXEON Rebel LED range:

LED

SP

OTL

IGH

TIN

G


VP3111 M1 VP3111 M2


Input power 11 W 22 W

Useful quantity of light 900 lm 1800 lm

Power ratio > 0,9c


4100 K. Customer-specifi c colour temperatures and colours possible, with limitations from the LED manufacturer.

Encapsulation LED modules and driver min. IP65



Weight 1 kg 1,5 kg

Materials Metalwork anodised or painted aluminium, and stainless steel

Colour Black, white, other colours possible

Fastening 60 mm tube (tube not included in the standard package)



VP 3111 LED spotlight fi xtureThe product family of VP3111 LED spotlights has been developed for spotlighting, and lighting ofpedestrian paths. The VPM1 LED module that was designed for the Valopaa street light fi xtures is used also in the VP3111 product family, and thus, all different distributions of luminous intensity are available for these light fi xtures as well. The spotlights can be used to liven up courtyards, parks, buildings and other objects and targets. With the different light distributions it is possible to build safe pedestrian paths and novel lighting to courtyards. The light source is rotatable, thus it can be turned at the pole top, and the light can be aligned as needed.

The VP3111 LED spotlight is available in one-module and two-module versions. The LED modules in the VP3111 M2 can be positioned in parallel to generate higher luminous effi ciency, or vertically differ-ent ways to generate a wider area of illumination. LED spotlights in white color are ideal for snow and ice building.


VP3111 M1 VP3111 M2

The VP3111 LED spotlight is fastened to a tube with 60 mm diameter. The electricity is brought to thelight fi xture through the pole. The connection device is situated inside the pole. The structure of theLED light fi xture transfers the heat away from the leds, and the structure is dust and water proof.

LED

SPO

TLIGH

TING



LED

SP

OTL

IGH

TIN

G

References

VP 3111 LED spotlights are suitable for lighting of e.g. different objects and walking paths. With different optical lenses one can highlight single objects, create general lighting or illuminate paths.

The LED modules can be rotated to different angles according to the illuminated object or area. Hence the light fi xture is very versatile and easily adapted to changing lighting needs.


VP3232 M1 VP3311 M2 VP3311 M6 VP3311 M12 VP3411i M8


Input power 11 W 22 W 55 W 110 W Max 102 W *

Useful quantity of light 900 lm 1800 lm 5400 lm 10800 lm 2200-9600 lm



4100 K. Customer-specifi c colour temperatures and colours possible, with limitations from the LED manufacturer.

Encapsulation IP 44 (LED mod-ules and driver min. IP65)

IP65


Measurements, w x l x h(height: without/with shaft)

190 x 90 x 90/130 mm

235 x 173 x 115/175 mm

425 x 173 x 115/175 mm

425 x 223 x 115/175 mm

360 x 213 x 130/232 mm


Colour Grey, other colours possible (in RAL)

Fastening Screw fastening to ceiling, wall or pole

Connection 5 x 2,5 mm2 –o– 3 x 4 mm2 –o–

LED lumen maintenance Typically less than 10%/100 000 h Compensated (Pat. Pend.)

LED fl ood light fi xturesVP3311, V3411 and VP3232 LED fl ood light fi xtures have been developed for spotlighting and area lighting. The light fi xtures can be used as working lighting, or to liven up courtyards, parks, buildings and other objects and targets. They are installed in srew fastening to ceiling, wall or poles. In addition, their installation angle can be adjusted in a continuous manner so that the light can be aligned as needed. The light fi xtures can also be used in street lighting if they are installed above streets to wire ropes or bridge structures.

The LED fl ood light fi xtures are suited to both indoor and outdoor use. Available also with readyinstalled power cable, which makes the light fi xtures easy to install and move according to needs, e.g. at construction sites.


* VP3411i LED light fi xture can be ordered with a specifi ed power or as part of Valopaa’s intelligent lighting system.

LED

SPO

TLIGH

TING


VP3232 M1 VP3311 M6 VP3311 M2 VP3411i M8


LED

SP

OTL

IGH

TIN

G

References

Case Torpparinmäki SchoolOn top of high pillars, around forty fl ood lights illumi-nate the yard of Torpparinmäki Elementary School in Helsinki. During the year 2010, the previously used metal halide fl ood lights were replaced with Valopaa’s LED light fi xtures. The new solution aimed at reducing the need for maintenance and lamp replacement as well as saving energy. Both goals were achieved.

The Technical Superintendent Tapio Valonen from the City of Helsinki’s Real Estate Department’s Facility Center says that the earlier fl ood lights had to be renewed all the time. This was expensive and time consuming, because of the height of the pillars. An elevating work platform was needed every time to lift the maintenance person.

The amount of energy needed for lighting has decreased substantially, since the LED technology can offer a bright enough illumination with only a fraction of the power needed for metal halide lighting. 250W and 70W metal halide lights have been replaced with 55W and 22 W LED light fi xtures.

“We were seeking together with Valopaa a solution with suitable lighting power and light distribution for this destination. The right solution was found and has been working well”, superintendent Valonen points out.


Case Neste Oil Express petrol stationPetrol stations wish to provide their customers a pleasant customer experience that consists of many factors. One essential part is the lighting at the meter fi eld. Neste Oil’s objective is to illuminate the meter fi elds of their service stations in high quality manner and very – even distinctively – brightly. The purpose is to make the customer experience pleasant and safe, as well as bring forth the brand of the corporation.

An unmanned Neste Oil Express station in downtown Oulu, Finland has had a pilot study since fall 2010, to gain experience in led lighting. The station had 12 metal halide 250 W light fi xtures, of which half were re-placed with Valopaa Ltd.’s VP2321 M12 LED light fi xtures. Later on during the fall the rest were replaced with Valopaa LED light fi xtures with intelligent features.

The quantity of light of the intelligent light fi xtures increases to full power when a customer enters the meter fi eld, and decreases again after the customer has left the area. The quantity of light also adjusts depending on the asphalt being wet, dry or snowy. It is possible to add other features to the intelligent system, e.g. timing and twilight switch. In addition, remote control software over Internet is available.

The energy usage at the illumination of the meter fi eld has been dropped by 50% compared to the previous metal halide lights. With the intelligent LED lighting system it is possible to obtain even 80% energy savings – at the same time keeping the quality and brightness of the illumination. The intelligent lighting system com-pensates the lumen depreciation, thus keeping the same lumen output throughout their lifetime. The operat-ing hours is very long, over 100 000 hours, which decreases considerably the maintenance costs.

INTE

LLIGE

NT LE

D LIG

HTIN

G


Intelligent LED lightingWith the intelligent lighting solution of Valopaa Ltd., the quantity of light can be changed according to conditions and needs. The system includes intelligent led light fi xtures and expansion options; master unit, sensors attached to it, and Internet connection. The system can be expanded in stages. The fi xtures communicate among each other with a license free encrypted radio communication.

The intelligent lighting solution of Valopaa Ltd. is deployed with a separate maintenance device. The device is used to wirelessly set the light intensity levels, their speed of change and time for staying constant, as well as the timing functionality of the master unit and the functioning levels of the sensors. In addition, reprograming of all the fi xtures can be done with the maintenance device, enabling future supplementary features.

Benefi ts to the customer:• Typically short payback time, even less than 2 years• Typically cuts energy usage by half (cf. conventional metal halide lighting), energy saving up to 80% on case by case basis • Future Proof - features upgradeable wirelessly - Settings and features will be updated wirelessly - The software can be updated after many years to respond to the latest developments - Update done wirelessly - no need to open the fi xtures for the software update• Constant lumen output (Pat.Pend.) - Lumen depreciation compensated - even light output through the lamp life - Leads to increased energy savings, when the lights are initially used with lower current• The system can be expanded as necessary - Intelligent light fi xtures are the basic part of the system - you can start by purchasing just the fi xtures - Features, e.g. the master unit, variety of sensors and remote controlling, can be added later as needed and according to customer’s investment capability.

INTE

LLIG

EN

T LE

D L

IGH

TIN

GConstant lumen output


Intelligent LED lighting system


INTE

LLIGE

NT LE

D LIG

HTIN

G

System parts

Intelligent light fi xture – setting light intensity as needed, constant lumen output

Master unit – controlling light fi xtures one at a time or in groups, timing, location data

Sensor(s) – different alternatives for locating sensors for light fi xture control, currently available motion sensors and brightness measurement (twilight switch)

Radio communication between devices – license free, encrypted, two-way radio communication

GSM/GPRS connection – defi ned interface for messages, connection to server

Server – software for lighting control

PC (user’s terminal) – connection to server, lighting control, monitoring and maintenance

Other systems and data available from them, features depending on the capabilities of the lighting control software

Sensor (s)

Master unit

Other systems- Energy price- Traffi c data- Weather

Server

Usage (customer / service company)

Internet


VPS Master Unit

Operating voltage 90-264 VAC / 50-60Hz, protection class II

Encapsulation IP65


Fastening Screw fastening

SRD Antenna 855-880 MHz

GSM Antenna (Accessory) 824–894 MHz / 1710–1990 MHz

GPS Antenna (Accessory) 1575.42 MHz ±3 MHz

Sensors (Accessories) Motion sensor, brightness sensor, temperature sensor

VPS Master UnitThe master unit is used with the intelligent lighting system of Valopaa Ltd.. It masters the lighting control according to prespecifi ed settings.

Functions:• Radio communication with the light fi xtures - Control according to time, calendar and sensor data. - Updating the parameters. - Updating the software.• GPRS communication - Receiving the data for controlling the light fi xtures and updating the parameters and software. - Receiving the updates for the internal software through SRD radio / GPRS. - Sending statistics / activity data.• Reading GPS information• Calendar and clock


The master unit can be used e.g. to control the intelligent street lighting system.


INTE

LLIG

EN

T LE

D L

IGH

TIN

G


The VP1301 LED street light fi xture is also available with adaptive light-ing application. The quantity of light can be adjusted according to needs. The light fi xtures are managed by a master unit via radio com-munication. Controlling can be based on time or calendar, or it can react to motion and brightness of the environment. Each light fi xture independently manages compensating the fading of the LED compo-nents. Control values of the light fi xtures and the master unit, such as desired quantity of light and the change patterns, are defi ned with a separate device via radio communication. With this new technology, lighting can be managed to save energy and adapt to the environ-ment.


VP1301i intelligent LED street light fi xture

INTE

LLIGE

NT LE

D LIG

HTIN

G

VP1401 LED light fi xtures have been developed for street lighting. The fi xtures can also be used as a high bay light fi xture in indus-trial lighting by selecting a suitable optical distribution. The light fi xtures are mounted to a wire rope over a road, or at an industrial hall to wire robe or directly to ceiling with an adaptor (available as accessory). The VP1401 LED light fi xtures are available in different output capacities, and as part of the intelligent LED lighting system of Valopaa.



VP1402 LED street light fi xtures have been developed to be installed to horizontal shaft. The pole adaptor is always the same direction with the shaft, but the visor part can be adjusted in 5° steps.



dith


INTE

LLIG

EN

T LE

D L

IGH

TIN

G

The VP2321 LED light fi xtures are designed for use as a ceiling fi xture in e.g. outdoor sheds and industrial buildings, and they are also suitable for canopy lighting at petrol stations. The light fi xtures are mounted in buried laying, where the fi xture is mounted to the slot in a way that only the exothermic panel and the LED modules are left visible under the ceiling structure. All the other parts of the light fi xture are situated inside the ceiling structure. Also available with the light fi xtures is a case that enables surface-mounting of the light fi xture.


VP2321i intelligent LED ceiling light fi xture

VP2222 LED light fi xtures have been developed to be used as a ceiling light fi xture in cold roofed spaces or industrial spaces, where changing e.g. fl uorescent lamps is diffi cult and might interrupt production. Now available also as an intelligent version, VP2222i M6, that comes with motion sensor and brightness sensor.


VP2222i intelligent LED ceiling light fi xture

V3411 LED fl ood light fi xtures have been developed for spotlighting and area lighting. The light fi x-tures can be used as working lighting, or to liven up courtyards, parks, buildings and other objects and targets. They are installed in srew fastening to ceiling, wall or poles. In addition, their installation angle can be adjusted in a continuous manner so that the light can be aligned as needed. The light fi xtures can also be used in street lighting if they are installed above streets to wire ropes or bridge structures.


VP3411i intelligent LED fl ood light fi xture

o be used as a ceiling paces, where changing rupt production. Now

M6, that comes with

ht fi xture


Project Raatti – Quality in practiceThe VP2231 LED lights were originally designed for a customer project, for illuminating the wall surrounding the Raatti sta-dium, located in Oulu. The developed light fi xture became a good addition to Valopaa’s product range (light fi xture can be found on page 34 of this catalog), and the use experience at the lighting site have been very positive.

180 LED light fi xtures have been installed in two-meter in-tervals to illuminate the Raatti wall. Each fi xture has one LED module and driver. Power supply is 3-step chained. All the fi x-tures have the same color temperature (LED bin), to achieve a uniform white light. The fi xtures illuminate brightly, but energy effi ciently, 360 meters of the white wall, consuming 2.2 kW of power, costing about 0.2 € per hour. The illumination has been in use for over a year (> 4000 hours). Each LED module has 8 pieces Rebel LEDs.

Cumulative light fi xture operating hours is about 700 000 hours (180 * 4000h). The combined LED operating hours is about 6 million hours (180 * 8 * 4000h). Any fi xture or LED have not yet been broken. The wall illumination is practically still the same as that immediately after installation. Failure rate is zero per-cent and predicted failure rate is 2% / 100 000 hours.

If ever one of the lamps would broke down, it should be re-placed or repaired in such a way that the repaired part of the il-lumination is no different from the rest of the illumination. Each product manufactured and supplied by Valopaa, has obtained a serial number. On the basis of that information, driver and LED module; LED-type, bin, energy effi ciency, lens, etc. infor-mation can be traced. The light fi xture has modular structure, so a mechanic can change the fl awed module. Maintainability of fi xtures and lighting entities is an important consideration in the product development of Valopaa.

LED

MO

DU

LES


LED modules and modernization of light fi xturesValopaa’s modular solution enables a wide variety of product implementations. In addition to the VP LED light fi xture range, Valopaa sells LED modules and drivers to other companies in the sector, as well as carry out a variety of customized products and solutions for the modernization of old and historical light fi xtures.

LED modules and driversVPM led modules and drivers are sold to other lighting manufacturers as part of their products, as well as to fi eld maintenance shops as spare parts. VPM led modules are tested and approved by SGS Fimko. A wide range of optical lenses is available for them; nine different light distributions. Also, the lens protects the LED components, so the light fi xture does not specifi cally require a front glass. VPM LED modules are available both as individual pieces (VPM1 and VPM2), and as integrated multi-module lists (VPM4).

Valopaa uses certifi ed 230VAC drivers that meet the standards even at -40°C temperatures. With the structures used in VP LED light fi xtures, drivers achieve the long life required in professional lighting applications. Valopaa’s intelligent light fi xtures use Valopaa’s own Finnish-made drivers. They are available, in addition to 230VAC use, with 12VDC, to power supply of single module, for use with batteries or solar cell.

Modernization and customer specifi c productsBy utilizing Valopaa’s modular solution, new products can be quickly developed for custom solutions with reliable and proven components. Valopaa has developed for its customers both ODM products, and new light fi xtures for Valopaa’s own product range, according to customer needs. Read for example about the VP2231 LED light fi xture development project for the illumination of the Raatti wall on the previous page.

Modernizing old light fi xtures with LED technology maintains the historic, often protected, urban landscape, and avoids costs of new architectural design. Architectural lights, used in urban and street illumination, can be modernized with the VPM LED module technology. In addition to the old infrastructure, also the shape of the fi xture can be maintained when a suitable structure is developed to be placed inside the case. Also, optics are chosen according to required light distribution. Modernization extends the life of the earlier investment, while achieving signifi cant savings in maintenance and operating costs.

LED

MO

DU

LES


VPM1 VPM2 VPM4 M2 VPM4 M3 VPM4 M4

Current Nominal 350 mA, max 1 A

Protection class Class I until 450 VDC, and SELV

Input power Typical 8,5 W 17 W 25,5 W 34 W


(with nominal current, when temperature of the body 60 °C/120 F)

LED connections SIngle module has 8 LEDs series-connected. VPM3 structure has multiple modules series-connected.

LED lumen maintenance Typically less than 10%/100 000 h (with nominal current)


4100 K. Customer-specifi c colour temperatures and colours possible, with limitations from the LED manufacturer

Encapsulation min. IP65


Measurements, w x l x h 70 x 52 x 55 mm 70 x 54 x 20 mm 100 x 50 x 14 mm 150 x 50 x 14 mm 200 x 50 x 14 mm

Materials Body recycled aluminium

Body aluminium

fasteners stainless steel, lens UV-protected PC or PMMA

Colour Black, white Anodized aluminium

Fastening Fixed installationand rotatable installation

Screw fastening

VPM LED modules


VPM 1 VPM 2

Note! The standard versions of the LED modules include 8 high power LEDs. The technical properties in the table above are based on eight LEDs. The modules can also be equipped with six, four or two LEDs for different brightness levels. In these cases the electrical values change accordingly.

The VPM LED modules comprise high class leds, optics for light distribution and a fi rm aluminium body. The VPM1 LED module has cooling ribs to ensure heat transfer from the LEDs to the ambient air. The VPM2 and VPM4 LED modules are designed to be used with e.g. an aluminium body of a light fi xture to ensure suffi cient cooling.

The VPM LED modules have been developed for street light fi xtures, but they are also suited for a wide variety of lighting needs both indoors and outdoors. The structures of the LED modules are dust and water proof. Therefore, they can be used in all kind of locations that are situated above water-level and have suffi cient ventilation. The LED modules have plenty of product applications from spotlighting to general lighting. Different applications are generated by using different optics for the light distribution and an appropriate fastening to a light fi xture or other assembly.

LED

MO

DU

LES

The products on this page only for lighting producers or as spare parts. We reserve the right to make changes.

VPM4 M4


VPD driversValopaa uses certifi ed 230VAC drivers that meet the standards even at -40°C temperatures. With the structures used in VP LED light fi xtures, drivers achieve the long life required in professional lighting applications. Valopaa’s intelligent light fi xtures use Valopaa’s own Finnish-made drivers. They are available, in addition to 230VAC use, with 12VDC, to power supply of single module, for use with batteries or solar cell.

LED

MO

DU

LES

The products on this page only for lighting producers or as spare parts. We reserve the right to make changes.

Standard current 230VAC drivers

230VAC drivers for intelligent light fi xtures 12 VDC driver

Philips white Philips black VPD 65W VPD 100W VPD 140W VPD 12V

Operating voltage

Protection class

230VAC/50Hz 230VAC/50Hz

class I

12VDC

class II class I

Suitability 1 module 5-16 modules 2-5 modules(16-40 LEDs)

4-8 modules(32-64 LEDs)

4-8 modules(32-64 LEDs)

1 module

Input power 11 W 56-158W 65 W 100 W 140 W 15 W

(LED current 350 mA)

Max current 350 mA 350 mA 500 mA 500 mA 700 mA 500mA

Power ratio EN 61000-3-2 EN 61000-3-2 n/a

Encapsulation Encapsulated No Encapsulated

Operating temperature -40…+55 °C -40…+60 °C -40…+60 °C


132 x 34 x 25 240 x 59 x 37 259 x 59 x 41 45 x 30 x 25

Weight 0,15 kg 1,27 kg 0,5 kg 0,05 kg

Control range n/a 0 and 10-100% 20-100% internally, 0-100% PWM

Controlling n/a PWM PWM



Modernization of light fi xturesArchitectural light fi xtures, used in urban areas and downtown streets, can be modernized with the VPM LED module technology. The existing infrastructure can be preserved when new struc-tures are developed inside the light fi xture’s covers. With Valopaa’s solution, each modernized light fi xture will have 1-16 LED modules. In addition optical lenses and the positioning of the LED modules are chosen based on the desired lighting pattern and lighting design.

Modernization of a Cupola light fi xture at a pilot site.

By modernizing the historical, protected luminaires, the appearance of an urban area can be preserved. At the same time substantial energy savings are achieved. The picture presents an example of modernization design of a light fi xture used in many central European countries.

LED

MO

DU

LES


LED

MO

DU

LES

VP9202 LED light fi xture for retrofi t purposesVP9202 M1 is an independent LED light fi xture that can be installed inside an old light fi xture, to replace e.g. 50W mercury vapor lamps or other similar light source. VP9202 is ideal to be installed inside e.g. Defa P001, P002, P003, N001, N002, and N003 light fi xtures. The fi xture can be installed inside almost all metal-bodied fi xtures where it fi ts. The fi xture can also be installed independently in a dry space (indoors) on the wall or ceiling. All Valopaa’s optics can be used with the VP9202 LED light fi xture.

VP9202 M1


Input power 11 W

Useful quantity of light 900 lm

Power ratio > 0,9c



Encapsulation IP20

Operating temperature -40…+40 °C

Measurements, w x l x h 133 x 100 x 35 mm

Materials Aluminium and stainless steel

Colour Aluminium

Fastening Screw fastening to wall, ceiling or body of old light fi xture

Connection 3 x 2,5mm2 –o–


VP9202 LED light fi xture can be installed inside old light fi xtures to replace the traditional light bulb. The prior electronics and lamp base are removed from the old light fi xture, VP9202 lighting unit is installed instead, and connectors are attached.


Valopaa Ltd.

Mäkelininkatu 1590100 Oulu, Finlandtel. 010 470 [email protected]

Sales

International salesMika Kiiskinentel. 010 470 [email protected]

Product ManagerIlkka Kaltiolatel. 010 470 [email protected]

ODM project salesToivo Vilmitel. 010 470 8891

Date post:	21-Feb-2016
Category:	Documents
Upload:	valopaa-ltd
View:	226 times
Download:	8 times

Valopaa Product Catalogue Spring 2012

Documents