+ All Categories
Home > Documents > Valora Hammond - Janome · by Valora Hammond Cutting Instructions: From Jewel: One 2” x 10”...

Valora Hammond - Janome · by Valora Hammond Cutting Instructions: From Jewel: One 2” x 10”...

Date post: 12-May-2020
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
2
Valora Hammond Quilt Block a story in every stitch WHAT’S NEXT
Transcript
Page 1: Valora Hammond - Janome · by Valora Hammond Cutting Instructions: From Jewel: One 2” x 10” strip From Cobalt: One 2” x 10” strip From Lagoon: Two 3 1/2” squares From Lava:

Valora Hammond

Quilt Block

a story in every stitch

WHAT’S NEXT

Page 2: Valora Hammond - Janome · by Valora Hammond Cutting Instructions: From Jewel: One 2” x 10” strip From Cobalt: One 2” x 10” strip From Lagoon: Two 3 1/2” squares From Lava:

WHAT’S NEXT

www.janome.com

by Valora Hammond

Cutting Instructions:

From Jewel: One 2” x 10” strip

From Cobalt: One 2” x 10” strip

From Lagoon: Two 3 1/2” squares

From Lava: Two 3 1/2” squares

Instructions:• Sew the Jewel and Cobalt strips together using a 1/4” seam. Press and cut into 2” wide

pieces. Alternate the location of colors and sew together to create a 3 1/2” 4-patch square and then press.

• Fold the Lagoon fabric square diagonally and place it in the corner of the Lava block.• Sew a 4-patch square to the Lava/Lagoon square.• Repeat for the remaining two blocks.• Sew the two units of 4 Patch and the Lava/Lagoon fabrics together.• Roll the Lagoon triangle back and sew a single decorative stitch in the middle to hold the

fold in place and to create a curve.


Recommended