Valve AutomationDelivering Value in the Middle East Through LocalFacilities with Automation and Integration Capabilities

For more informationabout our completeproducts offering andavailable services, pleasevisit our website atwww.emersonprocess.com/valveautomation orcontact one of our localsales offices.

El-O-MaticRack and pinion actuators

Brands You Can TrustOur actuator brands stand on their own for quality and proven service in the field. Whetheryou require pneumatic, electric, hydraulic or gas/hydraulic service, Emerson has the valveactuator and operating system to fit your requirements. In addition to our leading valveautomation brands, our facilities have experience with Emerson’s complementary controlproducts – PlantWeb, Fisher, Rosemount, TopWorx, ASCO, Delta V, Daniel and othertrusted brands.

BettisScotch–yoke pneumaticand hydraulic actuators

FieldQThe single valve

automation solution

HytorkRack and pinion

actuators

DantorqueHelical spline actuators

ShaferRotary vane actuators

EIMElectric actuators

© 2011 Emerson Process Management. All rights reserved.

The Emerson logo is a trademark and service mark of Emerson ElectricCo. “Brand mark listing” are marks of one of the Emerson ProcessManagement family of companies. All other marks are property of theirrespective owners.

The contents of this publication are presented for information purposesonly, and while every effort has been made to ensure their accuracy,they are not to be construed as warranties or guarantees, express orimplied, regarding the products or services described herein or their useor applicability. All sales are governed by our terms and conditions,which are available on request. We reserve the right to modify orimprove the designs or specifications of our products at any timewithout notice.

WACCP.O. Box 17033,Jebel Ali Free ZoneDubai, United Arab EmiratesT- +971 4 811 8100F -+971 4 886 5465

WACCP.O. Box 10305Jubail 31961Saudi ArabiaT- +966 3 340 8650F - +966 3 340 8790

P.O. Box 4015Abu DhabiU.A.E. T- +971 2 678 8800F- +971 2 678 7678

P. O. Box: 3070Al-Khobar 31952Saudi ArabiaT-+966-3-857-3157F- +966-3-857-8491

P. O. Box 32281DohaQatarT- +974 4 576777F- +974 4 315 448

Complete Control Accessories OfferingEmerson has a complete offering of accessories and control systems to complement theselection of valve actuators. These Emerson accessories – positioners, controllers, solenoids, regulators, breathers, wireless control – are in stock at our World Area Configuration Cen-tres and Valve Automation locations below. They can be expertly engineered into a ValveOperating System, mounted and tested locally by our trained technicians.

Ready Parts AvailabilityEmerson facilities in the Middle East, partnering with local authorized service facilities,have essential parts availability when and where you need it. We make it easy to fill MROrequirements and even fast turnaround OPEX investments. We anticipate customerneeds and carry parts for all our valve automation brands, with stocked materials toserve unexpected shutdowns.

Local Facilities withVast CapabilitiesEmerson has established world-class facilities inthe Middle East region, along with an experienceddistribution network. Our WorldArea Configuration Centers(WACC), including the modern9,000 square meter manufacturingfacility in Jubail and another inDubai, provide our clients in theMiddle East region with state-of-the-art manufacturing, assembly,integration and testing of globallyrecognized brands and provensystems for valve control.

Expert Application Engineering and Complete IntegrationTo add further value to our brands,Emerson has engineering and integration professionals in ourfacilities with extensive knowledge ofboth automation and control as well asapplications in oil and gas and processindustries. They are able to understandthe unique needs of our clients tocreate specific Valve OperatingSystems that are fit-for-purpose. Ourteam provides systems for emergencyshutdown (ESD), hydraulic partial

stroke and diagnostic testing (PST), and high integrity pressure protection system (HIPPS),to name a few applications. We provide full Factory Acceptance Testing (FAT), systemstesting and staging, and can integrate full wireless capability for use in any facility. Weassure that Emerson’s high level of quality is always maintained. Our technical staff isavailable to support and advise our clients throughout the life of their system.

Emerson –Your Single Sourcein the Middle Eastfor ValveAutomation

� Local facilitieswith exceptionalcapabilities

� Local expertiseand serviceexcellence

� Certified plantstandardizationand efficiency

� Largest on/offValve OperatingSystem portfolio

� Broad productoffering fromrenowned brands

� Local partsavailability andquick shipping

Exceptional LocalService CapabilityEmerson’s World AreaConfiguration Centers (WACC)and local authorized servicefacilities differentiate us fromeveryone else. We haveexperienced technicians, modernfacilities with cutting edgeautomation capabilities, high-quality standards and a strongdedication to serving our customersthroughout the life-cycle of theirvalve automation packages. Ourfactory trained and certifiedtechnicians can provide immediateassistance as needed, and we offerlong-term support contracts andservice agreements.

KnowledgeableField ServiceOur large cadre of serviceengineers in the Middle Eastare knowledgeable about allaspects of valve automationand control. And have beenspecifically trained andcertified in the intricacies of allEmerson valve automationbrands. Their many years ofindustry experience translatesinto their ability to provide

valuable assistance with specification development,consulting regarding sizing and installation, andexpert after-sales service in the field by technicianswho know how to diagnose, trouble shoot andsolve problems and are available 24/7.

Special Products forSpecial ApplicationsEmerson provides valve automation products and systemsolutions that add efficiency, reduced risk and added valueto oil and gas operations. An example is the Multiport Flow

Selector (MPFS). This unique automated system providesa cost effective and compact means toimprove production management and welloptimization. By selecting and diverting well

fluids from up to seven flow lines to a single test outlet, theMPFS reduces installation, operation and maintenancecosts for a well test system. Bettis Multiport Flow Selector issupplied with an EIM MPA uni-directional electric actuatorwith many unique features including high performancemicro controller, solid state starter, 12 bit magnetic encoder,high position measurement resolution and a Local DisplayModule for interrogation and commissioning. The MPA canbe controlled or monitored locally, or remotely via Modbus,Foundation Fieldbus or Profibus.

Continued Training,Continual AdvancementWe provide in-house training courses for clients andEmerson personnel to further their knowledge of valveautomation and field operations of Emerson products.Our courses are tailored specifically for your applicationsand offer hands-on opportunities to work with systemsin order to maximize the learning benefits. We can alsoprovide on-site training upon request.

KnowledgeableField ServiceOur large cadre of serviceengineers in the Middle Eastare knowledgeable about allaspects of valve automationand control. And have beenspecifically trained andcertified in the intricacies of allEmerson valve automationbrands. Their many years ofindustry experience translatesinto their ability to provide

valuable assistance with specification development,consulting regarding sizing and installation, andexpert after-sales service in the field by technicianswho know how to diagnose, trouble shoot andsolve problems and are available 24/7.

Special Products forSpecial ApplicationsEmerson provides valve automation products and systemsolutions that add efficiency, reduced risk and added valueto oil and gas operations. An example is the Multiport Flow

Selector (MPFS). This unique automated system providesa cost effective and compact means toimprove production management and welloptimization. By selecting and diverting well

fluids from up to seven flow lines to a single test outlet, theMPFS reduces installation, operation and maintenancecosts for a well test system. Bettis Multiport Flow Selector issupplied with an EIM MPA uni-directional electric actuatorwith many unique features including high performancemicro controller, solid state starter, 12 bit magnetic encoder,high position measurement resolution and a Local DisplayModule for interrogation and commissioning. The MPA canbe controlled or monitored locally, or remotely via Modbus,Foundation Fieldbus or Profibus.

Continued Training,Continual AdvancementWe provide in-house training courses for clients andEmerson personnel to further their knowledge of valveautomation and field operations of Emerson products.Our courses are tailored specifically for your applicationsand offer hands-on opportunities to work with systemsin order to maximize the learning benefits. We can alsoprovide on-site training upon request.

Valve AutomationDelivering Value in the Middle East Through LocalFacilities with Automation and Integration Capabilities

For more informationabout our completeproducts offering andavailable services, pleasevisit our website atwww.emersonprocess.com/valveautomation orcontact one of our localsales offices.

El-O-MaticRack and pinion actuators

Brands You Can TrustOur actuator brands stand on their own for quality and proven service in the field. Whetheryou require pneumatic, electric, hydraulic or gas/hydraulic service, Emerson has the valveactuator and operating system to fit your requirements. In addition to our leading valveautomation brands, our facilities have experience with Emerson’s complementary controlproducts – PlantWeb, Fisher, Rosemount, TopWorx, ASCO, Delta V, Daniel and othertrusted brands.

BettisScotch–yoke pneumaticand hydraulic actuators

FieldQThe single valve

automation solution

HytorkRack and pinion

actuators

DantorqueHelical spline actuators

ShaferRotary vane actuators

EIMElectric actuators

© 2011 Emerson Process Management. All rights reserved.

The Emerson logo is a trademark and service mark of Emerson ElectricCo. “Brand mark listing” are marks of one of the Emerson ProcessManagement family of companies. All other marks are property of theirrespective owners.

The contents of this publication are presented for information purposesonly, and while every effort has been made to ensure their accuracy,they are not to be construed as warranties or guarantees, express orimplied, regarding the products or services described herein or their useor applicability. All sales are governed by our terms and conditions,which are available on request. We reserve the right to modify orimprove the designs or specifications of our products at any timewithout notice.

WACCP.O. Box 17033,Jebel Ali Free ZoneDubai, United Arab EmiratesT- +971 4 811 8100F -+971 4 886 5465

WACCP.O. Box 10305Jubail 31961Saudi ArabiaT- +966 3 340 8650F - +966 3 340 8790

P.O. Box 4015Abu DhabiU.A.E. T- +971 2 678 8800F- +971 2 678 7678

P. O. Box: 3070Al-Khobar 31952Saudi ArabiaT-+966-3-857-3157F- +966-3-857-8491

P. O. Box 32281DohaQatarT- +974 4 576777F- +974 4 315 448

Complete Control Accessories OfferingEmerson has a complete offering of accessories and control systems to complement theselection of valve actuators. These Emerson accessories – positioners, controllers, solenoids, regulators, breathers, wireless control – are in stock at our World Area Configuration Cen-tres and Valve Automation locations below. They can be expertly engineered into a ValveOperating System, mounted and tested locally by our trained technicians.

Ready Parts AvailabilityEmerson facilities in the Middle East, partnering with local authorized service facilities,have essential parts availability when and where you need it. We make it easy to fill MROrequirements and even fast turnaround OPEX investments. We anticipate customerneeds and carry parts for all our valve automation brands, with stocked materials toserve unexpected shutdowns.

FieldQ