1-1/2” BS 336 male
Valves andRiserEquipment
www.naffco.com2
NAFFCO FZCO is among the world’s leading manufacturers and suppliers of top-tier firefighting equipment, fire protection systems, fire alarms, security and safety engineering systems worldwide. Since its humble beginnings, NAFFCO has grown from its headquarters in Dubai, UAE to expand to serving over 100 countries around the world.
One Stop Shopping for All Your Fire Safety and Security Needs
Today’s companies recognize the importance and convenience of having multiple safety services available under one roof, a “one-stop shopping” source for all types of fire protection systems. As the undisputed leader in
An Introduction to NAFFCO
firefighting technology and fire safety solutions, NAFFCO has worked in both the private and government sectors, as well as manufacturing plants, hospitals, stadiums, malls and other organizational projects, delivering comprehensive fire safety and engineering solutions.
NAFFCO is associated with globally renowned international companies in the fire protection industry such as Esser, Secutron, Megalights, Evax, Fike, Central, Shield, Mueller, Giacomini, RB Pumps, Bombas, Ideal Pumps, Joslyn Pumps, Peerless Pumps.
At NAFFCO we are passionate about sustaining, upgrading and improving any means of safety, by having over 2 million square foot of manufacturing space, over 450 engineers, and following all the latest technology available. We live by our passion, the passion to protect.
www.naffco.com 3
LANDING VALVESGENERAL SPECIFICATIONSApplicable Standards - BS 5041 - 1 :1987
Body - Copper Alloy to BS EN 1982
Hand Wheel - Cast Iron to BSEN 1561
Outlet - Female Instantaneous to BS 336 : 2010
Working Pressure - 15 Bar (Max)
Test Pressure - 22.5 Bar
OBLIQUE LANDING VALVE
SPECIFICATIONS
Model No NDR 098, Flanged Inlet, DN50 (to BS 4504 part 2:1974)
Model No NDR 097, 2 ½" Screw Thread Inlet to BS21
RIGHT ANGLE LANDING VALVE
SPECIFICATIONS
Model No NDR 106, Flanged Inlet, DN50 (to BS 4504 part 2:1974)
Model No NDR 105, 2 ½" Screw Thread Inlet to BS21
STRAIGHT THROUGH LANDING VALVE (Horizontal Type)
SPECIFICATIONS
Model No NDR 108, Flanged Inlet, DN50 (to BS 4504 part 2:1974)
Model No NDR 107, 2 ½" Screw Thread Inlet to BS21
Landing Valves are used for fighting fire with water and accordingly mounted in fire hydrant systems at Internal or External places. The landing valves are sometimes also referred to as internal hydrants because they are usually fitted inside the buildings for wet hydrant systems.
* Kitemark & LPCB approved landing valves available upon request.
* Kitemark & LPCB approved landing valves available upon request.
www.naffco.com4
BIB NOSE TYPE LANDING VALVE
SPECIFICATIONS
Model No NDR 110, Flanged Inlet, DN50 (to BS 4504 part 2:1974)
Model No NDR 109, 2 ½" Screw Thread Inlet to BS21
SPECIFICATIONS
Model No NDR 120 1.5" Ø, Female NPT Inlet & Outlet
Model No NDR 121 2.5" Ø, Female NPT Inlet & Outlet
Angle Hose Valve Drain 1.5" & 2.5"
Pressure Rating 300 PSI
Material Cast Brass
Hand Wheel Cast Iron
Finish Standard Rough Brass / Polished Brass
Optional Bright Chrome Plated
PRESSURE REDUCING LANDING VALVE
ANGLE HOSE VALVE
"E" TYPE PRESSURE REGULATING VALVEGENERAL SPECIFICATIONSApplicable Stand-ards
- BS 5041 - 1:1987
Body - Copper Alloy to BS EN 1982
Hand Wheel - Cast Iron to BS EN 1561
Outlet - Female Instantaneous to BS 336 : 2010
Working Pressure - 20 Bar (Max)
Test Pressure - 30 Bar
NAFFCO's Pressure reducing oblique landing valves are suitable for installation on wet risers in buildings for fire fighting purposes, permanently charged with water from a pressurized supply.These landing valves are pressure reducing type designed to provide a range of outlet pressure (4 bar - 12 bar).The landing valves are classified under high pressure and are suitable for use at nominal inlet pressure upto 20 bar and for working temperature range from 0 °C to 38 °C.
The Angle hose valve is manufactured as per NFPA 13 and most suitable for fire protection service outlet or with a hose rack assembly.
* Kitemark approved landing valves available upon request.
www.naffco.com 5
SPECIFICATIONS
Model No NSC 95AThread Type Female NPT
Body Cast BrassInlet 2½" Swivel Type
Outlet 4" StraightOptional Cap & Chain / Base plate for Clapper Inlet
SPECIFICATIONS
Model No NWR 103, ¾" Ø InletModel No NWR 104, 1" Ø Inlet
Thread Type Male BSPBody Brass
Test Pressure 350 PSI
BREECHING INLETS
SINGLE CLAPPER TWO WAY INLETS
AIR RELEASE VALVE
The clapper design allows for one or both inlets to be pressurized during operation and provide supplementary water supply connection for automatic sprinkler systems as per NFPA13
Air release valves are designed to vent entrained air that collects at high points in the riser.
SPECIFICATIONS
Model No NBI 095, 2 - Way Breeching Inlet (Manufactured & comply to BS 5041 - 3 - 1975)Body Spheroidal Graphite Cast Iron (Ductile Iron) to BS EN 1563:1997Inlet 2 nos. Male instantaneous coupling with NRV to BS 336:2010
Outlet 4" FlangeWorking Pressure 10 Bar
Test Pressure 20 Bar
SPECIFICATIONS
Model No NBI 115 4 - Way Breeching Inlet (Manufactured & comply to BS 5041 - 3 - 1975)Body Spheroidal Graphite Cast Iron (Ductile Iron) to BS EN 1563:1997Inlet 4 no's Male instantaneous coupling with NRV to BS 336:2010
Outlet 6" FlangeWorking Pressure 10 Bar
Test Pressure 20 Bar
NAFFCO Breeching Inlets are suitable for Installation on dry risers only, In a building for fire fighting purposes, fitted with inlet connection at fire brigade access level and outlet connection at specified points, which is normally dry but capable of being charged with water by pumping from the service appliances.
The Breeching inlets are manufactured to comply BS 5041 Part - 3: 1975 standard comprising of Male Instantaneous connections complying with BS 336:2010, drain valves PN16 rated and non - return valves.
*Kitemark & LPCB approved Breeching Inlet available upon request.
*Kitemark & LPCB approved Breeching Inlet available upon request.
www.naffco.com6
SPECIFICATIONS
Model No NBC 096, 2 - Way Breeching Inlet Cabinet
Model No NBC 116, 4 - Way Breeching Inlet Cabinet
CabinetElectro - galvanized Steel, Painted with
Electrostatic Powder Coating
Dimensions400 X 600 X 300 - for 2 way ; 600 X 600 X 300 - for 4 way
Glass Wire Mesh Reinforcement
Installation Recess or Surface Mounted
OptionalStainless Steel doors & frames available upon
request
SPECIFICATIONS
Model No NF750
Model No 1½" Ø X 30M Hose / 2½" Ø X 30 Meter
CabinetElectro - galvanized Steel, Painted with
Electrostatic Powder Coating
Dimensions1½" X 30m - 750 X 700 X 200; 2½" X 30m - 850 X 800 X 250
Glass Plain or Wire Mesh Reinforcement
Installation Recess or Surface Mounted
OptionalCabinet material of SS Brush or Mirror Finish
available on request
SPECIFICATIONS
Model No. Type Dimension Body
NHR 250 Swinging Wall Mounted2½" X 30
MeterMild Steel
Painted with Electrostatic
Powder Coating
NHR 250A Swinging Valve Mounted2½" X 30
Meter
NHR 150 Swinging Wall Mounted1½" X 30
Meter
NHR 150A Swinging Valve Mounted1½" X 30
Meter
SPECIFICATIONS
Model No NWR 081
BodyElectro - galvanized Steel, Painted with Elec-
trostatic Powder Coating
Hose 2½" Ø x 30m Hose
Type Swinging
BREECHING INLET CABINET
FIRE HOSE RACK CABINET
FIRE HOSE RACK
FIRE HOSE CRADLE
NAFFCO Breeching Inlet Cabinet is designed to accomodate 4" & 6" Outlet Breeching inlets. These
NAFFCO Fire hose rack cabinet is designed to accomodate complete assembly of fire hose rack. These
NAFFCO Fire hose rack is located inside buildings at the wet or dry riser outlet. It features a rack in which hangs the lay flat fire hose (30m). An automatic release
Fire hose is rolled and stored in a swinging cradle designed for easy access. These cradles are Wall mountable and Cabinet mountable.
Cabinets have either solid or wired glass door and are available in surface or recesses mounting version.
Cabinets have either solid or wired glass door and are available in surface or recesses mounting version.
mechanism allows water to flow through the hose after removal of the hose and nozzle.
*LPCB approved Breeching Inlet Cabinets available upon request.
*UL/FM approved 1½" & FM approved 2½" fire hose rack available upon request.
www.naffco.com 7
SPECIFICATIONS
Model No NF FB320/WKM
Body Polyamide tip with Aluminum
Alloy inlet
Inlet SizeMale Instantaneous coupling to
BS 336Working Pressure 16 Bar
Flow Control Shut - Jet & Spray
SPECIFICATIONS
Model No. NFL - 13SPQ, 1½" Ø
Flow Rate 490LPM @ 7 Bar
Model No. NFL - 13BPQ, 2½" Ø
Flow Rate 660 - 1020LPM @ 7 Bar
Body Aluminum Alloy, Anodised
Inlet Male Instantaneous to BS 336
Range 40-45M
Optional1. NST threaded Inlet available upon request2. Bronze construction Nozzles available upon request
SPECIFICATIONS
Model No NWR100/NWR 100AL
Body Copper Alloy/Aluminum
Inlet Size 2½" ØFlow Rate 120Gpm@7 Bar
Model No. NWR100A
Body Copper Alloy
Inlet Size 1½ ØFlow Rate 50 Gpm @ 7 Bar
Model No. NWR101P
Body Plastic
Inlet Size 1½" ØRange 15 M
SPECIFICATIONS
Model No NF WC 380A
Flow Rate 380 LPM@7 Bar
Body Cast Bronze with Chrome Finish
Inlet 1½" Ø, NH Female Swivel Inlet
JET & SPRAY NOZZLE
WATER COMBINATION NOZZLES
DIFFUSER NOZZLE
WATER CURTAIN NOZZLE
This durable, plastic nozzle produces a strong, concentrated jet of water that can fight fires in a most
These kinds of nozzles have been the trend in the Fire Service for several years to utilize greater water flow for initial attack. The most popular water delivery fire
Diffuser nozzle has an adjustable annular orifice which enables the jet of water to be controlled from shut - off
Water Curtain nozzle produces a strong, rain type pattern of water that can cool the surrounding areas and structures against flame spread.
efficient way. Yet it is quickly and easily adjustable from a jet to a diffused spray, or a complete shut off.
hoses are 1½" or 2½" with nozzle which flows from 490 to 1,020 LPM. It is also very convenient to use completed shut - off ball valve.
to small jet through to large jet then to spray pattern by turning of the rubber sleeve.
NF FB320/WKM
NF 13SPQ
CAT
.NO
.NF/
VRE/
01/1
5
In line with NAFFCO policy for continuous product development,NAFFCO has the right to change specifications without prior notice.
NAFFCO FZCOWorld HeadquartersDubai, United Arab EmiratesEmail: [email protected]
Serving Over 100 Countries WorldwideeeedededewidewidewidwiddwiddwidwldwrldwrldorldorldWorlWorWorWoWoWos Ws Wes Wes Wes iesriestrietrientrientrintruntuntounounounouCouCoCoCoCoCC0 C0 C00000000011