OP22-1 Series Air Operated Single Spool Tipping Valve - 160lpm 4.1

OP22 Series Air Operated Dual Spool Tipping Valve - 160lpm 4.3

OPAPV Series Air Pilot Operated Hose Burst Valve - 200lpm 4.5

DTCA130 Series Air Operated Single Spool Tipping Valve - 130lpm 4.6

DTCA200 Series Air Operated Single Spool Tipping Valve - 200lpm 4.7

DTCA200H2V Series Single Spool Valve with 2 Descent Speeds - 200lpm 4.8

DTCA250 Series Air Operated Single Spool Tipping Valve - 250lpm 4.9

DTCA2502P Series Single Spool Valve with 2 Pressure Ranges - 250lpm 4.10

DTE40 Series 12V & 24V Electrical Operated Tipping Valve - 40lpm 4.11

DC3V*AP Series Air Operated Diverter - 250lpm 4.12

MB3 Monoblock 45lpm Valve 4.13

MB5 Monoblock 80lpm Valve 4.15

MB6 Monoblock 120lpm Valve 4.17

Inline Valves - Lever Diverters - Pilot Check Valves 4.19

Inline Valves - Flow Control Valves 4.20

Inline Valves - Relief Valves 4.21

VALVES

4.0

1800 022 831www.heavyhydraulics.com.au

TIPPING VALVESOP22-1 Series – 160 l/min - Air Operated

Air Operated Single Spool Three Position Control Valve.

A single spool valve is for operatinga single tipper hoist when operatedby air cabin control. The OP22-1valve is casted and manufactured inAustralia by Oilpath. The valve has aflow 160 l/min and is designed withlarge internal tank galleries for lowpressure drop.

Features:• Proportional operation• Adjustable Relief• Pressure Switch Port• 1” BSPP service ports & 1 ¼” BSPP

tank port• Manual Handle option available• Slow Lowering option available

4.1

1800 022 831www.heavyhydraulics.com.au

Flow rate (l/min) 160

Max working pressure bar 245

Spool Hard Chromed Plated

Port sizes (BSPP) Service 1"

Port sizes (BSPP) Tank Port 1 1/4"

Air port size G1/8"

Air pressure requiremnet 90 PSI

Weight (kg) 7 kg

Main Data

TIPPING VALVESOP22-1 Series – 160 l/min - Air Operated

SCHEMATIC

Refer ABCD Control brochure for more details

4.2

1800 022 831www.heavyhydraulics.com.au

Air Operated Dual Spool Three Position Control Valve.

The dual valve is for operating twotipping hoists for Truck & Dog or ‘B’Double systems. The OP22 valve iscasted and manufactured inAustralia by Oilpath. The valve has aflow 160 l/min and is designed withlarge internal tank galleries for lowpressure drop.

TIPPING VALVESOP22 Series – 160 l/min - Air Operated

Features:• Proportional operation• Adjustable Relief• Pressure Switch Port option• 1” BSPP service ports & 1 ¼” BSPP

tank port• Manual Handle option available• Slow Lowering option available

4.3

1800 022 831www.heavyhydraulics.com.au

Flow rate (l/min) 160

Max working pressure bar 245

Spool Hard Chromed Plated

Port sizes (BSPP) Service 1"

Port sizes (BSPP) Tank Port 1 1/4"

Air port size G1/8"

Air pressure requiremnet 90 PSI

Weight (kg) 15 kg

Main Data

TIPPING VALVESOP22 Series – 160 l/min - Air Operated

SCHEMATIC

Refer ABCD Control brochure for more details

4.4

1800 022 831www.heavyhydraulics.com.au

HOIST BLOCKING VALVEOPAPV Series – 200 l/min - Air Pilot Operated

4.5

1800 022 831www.heavyhydraulics.com.au

TIPPING VALVESDTCA130 Series – 130 l/min - Air Operated

Maximum pressure (bar) 350

Operating pressure (bar) 300

Flow rate (l/min) 130

Weight (kg) 5.2

Main Data

Notes:❖ This tipping valve can be used in progressive descent with our air commands ABCD.❖ Tighten the tipping valve with only three bolts. Do not use the "D" hole. Screw the three

bolts with a max. tightening torque of 20 Nm. (soft tightening).

4.6

1800 022 831www.heavyhydraulics.com.au

TIPPING VALVESDTCA200 Series – 200 l/min - Air Operated

Maximum pressure (bar) 300

Operating pressure (bar) 250

Flow rate (l/min) 200

Weight (kg) 5.2

Main Data

Notes:❖ This tipping valve can be used in progressive descent with our air commands ABCD.❖ Tighten the tipping valve with only three bolts. Do not use the "D" hole. Screw the three

bolts with a max. tightening torque of 20 Nm. (soft tightening).

4.7

1800 022 831www.heavyhydraulics.com.au

TIPPING VALVESDTCA200H2V Series – 200 l/min - 2 Descent Speeds

Maximum pressure (bar) 300

Operating pressure (bar) 250

Flow rate (l/min) 200

Weight (kg) 6

Main Data

Notes:❖ This tipping valve can be used in progressive descent with our air commands ABCD.❖ Screw the three bolts with a max. tightening torque of 20 Nm. (soft tightening).

4.8

1800 022 831www.heavyhydraulics.com.au

TIPPING VALVESDTCA250 Series – 250 l/min – Air Operated

Maximum pressure (bar) 350

Operating pressure (bar) 300

Flow rate (l/min) 250

Weight (kg) 6

Main Data

Notes:❖ This tipping valve can be used in progressive descent with our air commands ABCD.❖ Tighten the tipping valve with only three bolts. Do not use the "D" hole. Screw the three

bolts with a max. tightening torque of 20 Nm. (soft tightening).

4.9

1800 022 831www.heavyhydraulics.com.au

TIPPING VALVESDTCA2502P Series – 250 l/min - 2 Pressure Ranges

Maximum pressure (bar) 350

Operating pressure (bar) 300

Flow rate (l/min) 250

Weight (kg) 6

Main Data

Notes:❖ This tipping valve can be used in progressive descent with our air commands ABCD.❖ Tighten the tipping valve with only three bolts. Do not use the "D" hole. Screw the three

bolts with a max. tightening torque of 20 Nm. (soft tightening).

4.10

1800 022 831www.heavyhydraulics.com.au

Maximum pressure (bar) 350

Operating pressure (bar) 300

Flow rate (l/min) 40

Weight (kg) 2.3

Electrovalve Supply (V) 12 or 24 VDC

Main Data

TIPPING VALVESDTE40 Series – 40 l/min, 12 or 24V Electric Operated

4.11

1800 022 831www.heavyhydraulics.com.au

DIVERTER VALVEDC3V*AP Series – 250 l/min - Air Operated

Maximum pressure (bar) 400

Operating pressure (bar) 430

Flow rate (l/min) 250

Air Pressure (bar) 4.5 - 12

Weight (kg) 2.7

Porting (BSPP) 1"

X - Air Line Port (BSPP) R1/8"

Main Data

4.12

1800 022 831www.heavyhydraulics.com.au

MONOBLOCK VALVESMB3 Series – 45 lpm

4.13

1800 022 831www.heavyhydraulics.com.au

MONOBLOCK VALVESMB3 Series – 45 lpm

4.14

1800 022 831www.heavyhydraulics.com.au

MONOBLOCK VALVESMB5 Series – 80 lpm

4.15

1800 022 831www.heavyhydraulics.com.au

MONOBLOCK VALVESMB5 Series – 80 lpm

4.16

1800 022 831www.heavyhydraulics.com.au

MONOBLOCK VALVESMB6 Series – 120 lpm

4.17

1800 022 831www.heavyhydraulics.com.au

MONOBLOCK VALVESMB6 Series – 120 lpm

4.18

1800 022 831www.heavyhydraulics.com.au

INLINE VALVES

4.19

1800 022 831www.heavyhydraulics.com.au

INLINE VALVES

4.20

1800 022 831www.heavyhydraulics.com.au

OPAPV Series – 200 l/min - Air Pilot Operated INLINE VALVES

4.21

1800 022 831www.heavyhydraulics.com.au