CATALOG 8290R

Tough Valvesfor serious

applications,including

corrosivesand steamto 360o F

Angle Body PistonValves

4

4 Series 8290...tough and packed

with features.

2

Position Monitoring (optional)• Signaling box with mechanical or inductive contacts• Compact signaling unit for magnetic position detectors

Standard Visual Position Indicatorwith clear polypropylene cover.Available on 63 and 90 operators

ASCO Pilot ValvesSeries • 8325 • 8320are the industry standard for reliability and durability in all industrial environments

Anti-water HammerThe fluid passes under the disc resulting in slower closure

High Flow Rateoptimization of the fluid flow path

Solid Stuffing Box Total external sealingFlat embedded seal and chevron shaped PTFE seal

Spring Loaded Stem SealThe Viton* wiper keeps harmfulgrit away from the stem area. As a backup, there are multiple-ribbed shearing rings that providea cleaning action in the stemgrooves. These shearing rings provide a longer life by preventing debris from reachingthe chevron packing.

Solid Watertight Actuator made from tough fiber compositeand protected withdouble o-ring seal

Piston Actuatorrotates 360º to allow easy assemblyand positioning of pilot port

ReliabilitySmooth stem movement guided by2 oversized bearings

Also Series 189 Banjo Valves

Bubble-tight shutoffwith PFTE disc

One Piece Cold Rolled S.S. Stemprovides added strength and less resistance

* Dupont Company trademark

4 Series 8290...reliable performance

and long life.These 2 way angle-body piston valves have proven durability in handling aggressive fluids, tested to over onemillion cycles. In addition, they can be used in high cycling steam applications (entry above disc), as well asmain line steam (entry under disc) dependent upon the velocity and pressures applied to the stuffing box. Asthe actuator exhausts, the piston slowly closes against the angle body seat to eliminate water hammer.

Available in cast bronze bodies with brass or 304 s.s. stuffing box and 303 s.s. disc...or in fine investment-cast316L s.s. bodies with all 316L s.s. wetted internals. The 50 operator, 63 operator, and 90 operator valves have a 431 s.s. stem held by the stuffing box and chevron-ring packing protected by a Viton* wiper ring which prevents any particles in the media from entering the packing area.

All three models have a weep hole on the stem which provides great visual indication of any shaft scoring.The 63 operator and 90 operator actuator housings have a pilot port and an exhaust port with a sinteredsilencer. Visual position indicators are standard features, with reeds or electronic switches available as options.The 50 operator housing has one pilot port and a top exhaust, with optional electronic or visual position indication available only in Normally Closed constructions.

3

SPECIFICATIONS:

Fluids Handled: Air, Water, Inert Gas, Oil, Light Slurries and Steam

Fluid Temperature: 15˚ F to 366˚ F Ambient Temperature: 15˚ F to 150˚ FDifferential Pressures: Fluid 0 to 240 psi,

Steam 0 to 150 psiMaximum Operating Pressure: 240 psiMaximum Viscosity: 2700 SSU

Pilot Valve:Pilot Fluids: Filtered Air or WaterPilot Pressure Range: 60-150 psiCv: 50 Operator & 63 Operator - .06 minimum

90 Operator - .10 minimumPilot Port: 50 Operator & 63 Operator - 1/8” NPT

90 Operator - 1/4” NPT

• Visual position indicator for Normally Closed (NC) valve with 50 operator, suffix: VI• Oxygen service, suffix: N• NET-INOX treatment (stainless steel valve body pickled in nitric/hydrofluoric acid bath) - Available on request.

• AISI 316L stainless steel version: Contact ASCO for all stainless steel valves.

• Low Minimum Pilot Pressures - 22 or 38 psig: Contact ASCO with your application details.

* Dupont Company trademark

OPTIONAL ORDERING SPECIFICATIONS:

Typical applications include:• Chemical Processing Equipment • Sterilizers• Laundry Equipment • Air Drying Equipment• Pollution Control Equipment • Food Processing Equipment• Refrigeration Equipment • Industrial Compressors• Styrofoam Machines • Textile Dyeing/Drying Machines• Paint Spraying Equipment • Bottling Equipment • Autoclaves

Designed and built to take on tough applications for more than one million cycles.

SPECIFICATIONS

Normally Closed (Entry under disc) - Pilot Air is 60 psi min. - 150 psi max.

Normally Open (Entry under disc) - Pilot Pressure: see graph

Normally Closed (Entry above disc) - Rapid Cycling Steam Applications

50Operator

PipeSize(ins.)

CVFlow

Factor

Pilot Pressure(PSI)

MaximumPressure Differential

Catalog Number

1/2

3/4

1

5.7

11

15

60

60

60

150

150

150

240

150

90

150

150

90

8290A384

8290A385

8290A386

8290A393

8290A394

8290A395

1/2

3/4

1

5.7

11

15

I*

I, II*

I, II, III*

240

240

240

150

150

150

8290A387

8290A388

8290A389

8290A396

8290A397

8290A398

1/2

3/4

1

5.7

11

15

150

150

150

8290A390

8290A391

8290A392

8290A399

8290A400

8290A401

IV*

IV*

IV*

150

150

150

Min. Max. Fluids Steam Bronze Body 316L S.S. Body

* Minimum pilot pressure varies with differential pressure. See charts below.

-

-

-

Normally Closed Valve - entry above disc:50 operator

Min

Pilo

t P

ress

ure

(psi

)

145

116

87

58

43.5

0

145

116

87

58

43.5

0

Normally Open Valve - entry under disc:50 operator

29 58 87 116 145

Graphs for Steams and Fluids

1

3/41/2

P (psi)P (psi)

Differential Pressure ∆P (psi)Differential Pressure ∆P (psi)

29 58 87 116 232174

1

3/41/2

II

150

150

150

Min

Pilo

t P

ress

ure

(psi

)

Ø A F

Ø 691/8

360˚

C D

50˚

EB

G 3

2

1/8

Ø A F

Ø 69

360˚

C D

50˚

H

EB

43

3

1

2

1

2

Normally Open50

operator

Normally Closed50

operator

Normally Open Valve, 50 operator,entry under disc

Normally Closed Valve, 50 operator. entry under disc at 2entry above disc at 1

Ø A B C D E F H G weights (1)

1/23/41

142 (5.59)150.5 (5.92)155 (6.10)

154.5 (6.08)159 (6.26)165 (6.50)

141 (5.55)143 (5.63)145 (5.71)

65 (2.56)75 (2.95)90 (3.54)

27 (1.06)32 (1.26)41(1.61)

146 (5.75)146 (5.75)146 (5.75)

78 (3.07)78 (3.07)78 (3.07)

0.9 (1.76)1 (2.20)

1.4 (3.09)

4

Flow Characteristics Dimensions - mm (ins.) and Weights kgs (lbs.)

Note: If the downstream pressure is higher than the upstream pressure (backpressure), apply the following conditions to select the appropriate pilot pressure:• 50 Operator: take the 58 psi minimum pilot pressure add 29 psi to chart II, move the graph up linearly.• 63 and 90 Operator: add 22 psi minimum pilot pressure to charts IV, VI.

Backpressure with liquids is not recommended as water hammer effect can arise except within allowabledifferential pressure limits. ( Maximum 150 psi.)

I

(1) weight of valve without pilot

➁ Filter-plug, ➂ Pilot solenoid valve

1

2

1

2

SPECIFICATIONS

Normally Closed (Entry under disc) Pilot air is 60 psi min. Max is 150 psi

Normally Open (Entry under disc)

Normally Closed (Entry above disc for rapid cycling steam)

63Operator

PipeSize(ins.)

MaximumPressure Differential

Catalog NumberCVFlow

Factor

1/2

3/4

1

240

240

150

150

150

120

8290A002

8290A005

8290A010

8290A045

8290A048

8290A053

5.7

11

19

1/2

3/4

1

150

150

150

8290A036

8290A037

8290A038

8290A079

8290A080

8290A081

Fluids Steam Bronze Body 316L S.S. Body

5.7

11

19

-

-

-

Normally Open Valve - entry under disc:63 operator

Min

Pilo

t P

ress

ure

(psi

)

145

116

87

58

29

0

145

116

87

58

36.25

0

Normally Closed Valve - entry above disc:63 operator

29 58 87 116 174

Graphs for Steams and Fluids*

1-1/2

1-1/41

90 90 8290A016 8290A0591-1/4 36

2P (psi)

232 29 58 87 116 145

P (psi)

Differential Pressure ∆P (psi) Differential Pressure ∆P (psi)

1/2

1-1/4

1

3/4

60 60 8290A020 8290A0631-1/2

40 40 8290A024 8290A067

45

2 66

1/2

3/4

1

240

240

240

150

150

150

8290A026

8290A027

8290A028

8290A069

8290A070

8290A071

5.7

11

240 150 8290A030 8290A073

19

1-1/4

160 150 8290A032 8290A075

36

1-1/2

105 105 8290A034 8290A077

45

2 66

2 1-1/2

3/41/2

Catalog numbers apply for both steam and general purpose constructions.

Min

Pilo

t P

ress

ure

(psi

)

H360˚

C D

F EB

50˚

Ø 85

Ø A

2

31

50,5

1/8

Normally Open Valve, 63 operatorentry under disc

(1) weight of valve without pilot

5

III IV

ØA B C D E F H weights (1)

1/23/41

1-1/41-1/2

2

183 (7.20)191 (7.52)198 (7.68)217 (8.54)224 (8.82)249 (5.87)

197 (7.36)205 (8.07)215 (8.46)229 (9.01)245 (9.64)259 (10.2)

65 (2.56)75 (2.95)90 (3.54)110 (4.33)120 (4.72)150 (5.90)

27 (1.06)32 (1.26)41(1.61)50 (1.97)60 (2.36)70 (2.76)

153 (6.02)153 (6.02)153 (6.02) 153 (6.02)153 (6.02)153 (6.02)

1.2 (2.6)1.3 (2.86)1.7 (3.75)2.1 (4.63)2.9 (6.39)3.7 (8.16)

Dimensions - mm (ins.) and Weights kgs (lbs.)

183.5 (7.22)189 (7.44)194.5 (7.65)204 (8.03)215 (8.46)224 (8.82)

H360˚

C D

F E

50˚

Ø 85

1/8

Ø A

50,5

1 2 3

B

Normally Closed Valve, 63 operatorentry under disc at 2, entry above disc at 1

* See footnote on page 4.

PilotPressure

MIN. MAX.

1-1/4

1-1/2

2

-

-

150

150

135-

36

45

66

150

150

150

150

150

150

IV*

IV*IV*

IV*

IV*IV*

III*

III*

III*

III*

III*III*

150

150

150

150

150

150

8290A039

8290A040

8290A042

8290A082

8290A083

8290A085

150

150

150

150

60

60

60

60

60

60

150

150

➀ Position indicator,➁ Filter-plug,➂ Pilot solenoid valve

1

22

1

SPECIFICATIONS

Normally Closed (Entry under disc) Pilot air is 60 psi min. Max is 150 psi

Normally Open (Entry under disc)

Normally Closed (Entry above disc for rapid cycling steam)

90Operator

PipeSize(ins.)

CVFlow

Factor

MaximumPressure Differential

Catalog Number

1

1-1/4

1-1/2

19

36

45

240

180

120

150

150

120

8290A011

8290A017

8290A021

8290A054

8290A060

8290A064

1

1-1/4

1-1/2

19

36

45

240

240

240

150

150

150

8290A029

8290A031

8290A033

8290A072

8290A074

8290A076

1-1/4

1-1/2

2

36

45

66

145

145

145

8290A136

8290A041

8290A043

8290A137

8290A084

8290A086

Fluids Steam Bronze Body 316L S.S. Body

-

-

-

Normally Open Valve - entry under disc:90 operator

Min

Pilo

t P

ress

ure

(psi

)

145

116

87

58

43.5

0

145

116

87

58

43.5

0

Normally Closed Valve - entry above disc:90 operator

29 58 87 116 174

Graphs for Steams and Fluids*

1-1/2

1-1/41

2 66 90 90 8290A025 8290A068

2 66 240 150 8290A035 8290A078

2

P (psi)

232 29 58 87 116 145

P (psi)

Differential Pressure ∆P (psi) Differential Pressure ∆P (psi)

1-1/2

1-1/4

1

2

Min

Pilo

t P

ress

ure

(psi

)

H360˚

C D

F EB

50˚

Ø 118

1/4

Ø A

21

67

3

➀ Position indicator, ➁ Filter-plug, ➂ Pilot solenoid valve

H360˚

C D

F EB

50˚

Ø 118

1/4

Ø A

1

67

2

3

Normally Open Valve, 90 operator entry under disc

Normally Closed Valve, 90 operatorentry under disc at 2entry above disc at 1

6

ØA B C D E F H weights (1)

11-1/41-1/2

2

219 (8.62)236 (9.29)243 (9.57)267 (10.51)

235 (9.25)246 (9.69)

262 (10.31)276 (10.87)

90 (3.54)110(4.33)120 (4.72)150 (5.91)

41 (1.61)50 (1.97)60 (2.36)70 (2.76)

169 (6.65)169 (6.65)169 (6.65) 169 (6.65)

2.3 (5.07)2.7 (5.95)3.5 (7.72)4.3 (9.48)

Dimensions - mm (ins.) and Weights kgs (lbs.)

214.5 (8.44)221 (8.70)232 (9.13)241 (9.49)

V VI

* See footnote on page 4

PilotPressure

MIN. MAX.

60

60

60

60

150

150

150

150

150

150

150

150

150

150

150

VI*

VI*VI*

V*

V*

V*V*

(1) weight of valve without pilot

1

2 2

1

Accessories and Optionsfor all 8290 Series 50, 63 and 90

Valve Position Indicator Signaling BoxThis Signaling Box fits all Series 8290 Valves. It is suppliedseparately as a kit with two mechanical switches, or two non-contact switches with LEDs, and mounts on top of thevalve actuator in place of the standard visual indicator. Asthe valve cycles, cams on the signaling lengthening stemoperate the switches to provide electrical signaling of the

valve position. The signaling box can be rotated 360˚ on the centerline andbe locked into place with a set screw.

ConstructionBody - PA ( polyimide ) Protection Rating - IP65Cover - Transparent polymethylpentene

Mechanical Switches

1 terminal strip with 6 screw terminalsContact breaking capacity:

• resistive circuit - 3.2 amps at 250 VAC• inductive circuit - 1.8 amps at 250 VAC

ElectricalNon-Contact Switches

2 terminal strip with 2 screw terminals• integral electrical protection• load current 200 milliamps maximum• 10 to 30 VDC power supply required

Mechanical Switches Non-Contact Switches

Bronze & 316L Stainless Steel 885 29 001 885 29 002

885 29 011 885 29 013All Stainless Steel AISI 316L Valves

Signaling Box

PipeSize

OrificeSize Mechanical MechanicalInductive Inductive

88200019 8820002388200016 88200020

88200017 88200021

1/23/4

11 1/4

1 1/2

2

15

2025324050

Switches Switches50 Operator 63 and 90 Operator

Lengthening Stems

Catalog Numbers

7

1) For assembled delivery of the valve and signaling box, add suffix SM2 (mechanical switch) or SI2 (inductive switch).2) For separate delivery please specify both signaling box (either type) and lengthening stem accessory to valve type.

Dimensions

➀ Cable Gland, ➁ 360˚ Rotation Lock Screw, ➂ Fits all 8290 Series valves

shown with 63 operator shown with 90 operator

Valves

Compact Signaling Unit The operation rod of the Compact Signaling Unit is attached to thestem of the valve and contains the permanent magnet. The extremepositions of the valve stem can therefore be detected by either thereed switch or the magneto-resistive detectors.It is possible to install one or two detectors to monitor one or both positions of a valve.

CharacteristicsMax. switching rating:

Power

Voltage

Current

Voltage drop

Contact resistance

Max. leakage current

Max. allowable overvoltage

Dielectric strength

Sensitivity

Response time

Repeatability

Life

Reed SwitchDetector

AC (~)

12VA

10 to 60 V

DC (=)

10W

500 mA<2.7 V (1=200 mA)<2.9 V (1=500 mA)

max. 0.1 ohm-

-

600 V 470 V

min. 3 mTesla (30 Gauss)

±0.1 mm

107 operations

10 to 60 V

0.2 ms0.6 ms

OpeningClosing

Magneto-resistiveDetector

DC (=)

6W

10 to 30 V

200 mA

<1.1 V (1=50 mA)<1.4 V (1=200 mA)

-10 µA

50 V (10 seconds)

-

min. 3 mTesla (30 Gauss)

0.2 ms0.1 ms

±0.1 mm

ConstructionSupport - PA (polyimide)Detector encapsulation - PPS (Poly phenylene)

Signal indicationA green LED lights when contact is established orswitching is affected.

L2

L1

50˚

360˚

1 21 2

Normally Closed Normally Open(except 50 operator)

Reed/magneto-resistive detectorswith cable entry

(with and without connector)

Reed/magneto-resistive detectors

with integral M8 connector

NC 50 Operator

63 Operator

90 Operator

NC 50Operator

63Operator

90Operator

27 (1.06)

35 (1.38)45 (1.77)51 (2.01)

10 (.39)20 (.79) 58 (2.28)

81 (3.19) 75 (2.95) 65 (2.56)

40 (1.57)50 (1.97)L1

L2

8

>107 operations

Dimensions - mm (ins.)

Flow Characteristics

Stroke LimiterThe Stroke Limiter allows Cv flow to be adjustedfrom 0% to 100%. It is available as a kit andmounts on top of any 8290 Series Valve in placeof the position indicator. Available for NormallyOpen or Normally Closed valves with entryunder the disc. Kit Number: 88529003Only for 63 and 90 operator heads.

Direct Mount Pilot ValvesThese special, 3 way direct acting, Normally Closed Pilot Valves can pilot 63operator Series 8290 valves. To order, use the full catalog numbers, includingthe voltage as shown to the left.

InletPort*

ExhaustPort

Pipe Size(ins.)

Orifice Size(ins.)

CV FlowFactor

Max.Pressure

(psi)

SpeedControl on

ExhaustPort Catalog Number1-2 2-3

1/8 1/16 0.04 0.06 150with

without

18900049-24/DC18900049-120-/60

18900036-24/DC18900036-120/60

9

Additional Options

*4 mm plastic tubing is required for theInlet Port. An adapter for 1/4” tubing is available through Legris® distributors. Part number 3168-56-04.

Description

Detector Type

Su

pp

ort

Det

ecto

r• Signaling support supplied installed on the valve

on Series 8290 valve with 50 (NC only), 63 or 90 operator

• Signaling support supplied separately 50 operator 63 and 90 operator

• Integral M8, 3-pin screw-on male connector• 2 m cable, 0.14 mm2 conductors, end stripped • 5 m cable, 0.14 mm2 conductors, end stripped • 0.8 m cable + 3-pin 8 mm diameter, snap-on male connector• 0.8 m cable + 3-pin m12 maled connector

Catalog Number

SU

885 29 032885 29 027

Constr.Ref. Reed Detector MR Detector

881 00 140881 00 142881 00 144881 00 146881 00 148

12234

881 00 141881 00 143881 00 145881 00 147881 00 149

1*

2*

* CHOICE OF EQUIPMENTIndicate 2 catalog numbers when ordering a compact signaling unit:

• Catalog number for signaling support (delivered mounted on valve or alone)• Detector’s catalog number and required quantity (depending on model chosen)

Detectors are always delivered separately

Example: • Valve + mounted signaling support 8290A010SU• Switches ordering number qty. (2) 881 00 140

12

Construction References 45˚ cable outlet protected by grommet

Constr. Ref. 1 Constr. Ref. 2 Constr. Ref. 3 Constr. Ref. 4

88100141

30V-200mA max. 88100143

30V-200mA max. 88100147

30V-200mA max. 88100149

30V-200mA max.

Type of Detector Connections Available

Manual Operator

Attachment to8290 Port.

3 way • Direct Acting

General Service Solenoid ValvesBrass or Stainless Steel Bodies • 1/8” and 1/4” NPT

4

8320SERIES

Pipe Size

(ins.)

Orifice Size(ins.)

Cv Flow

Factor Catalog Number

Watt Rating/Class of

CoilInsulation

Operating Pressure Differential (psi)

Maximum AC Maximum DC

1/8

1/4

3/64

3/32

.06

.12

AC

Standard EnclosuresOne-piece molded epoxy Types 1, 2, 3, 3S, 4, and 4X combination General Purpose and Watertight.Optional EnclosuresTypes 3, 3S, 4, 4X, 6, 6P, 7 and 9 combination Explosionproof and Watertight.To order, add prefix “EF” to catalog number.

ElectricalStandard Voltages: 24, 120, 240, 480 volts,AC, 60 Hz (or 110, 115, 220, 230 volts AC,50 Hz) 6, 12, 24, 120, 240 volts DCOther voltages available when required.

CoilContinuous duty molded class FNominal Ambient Temperature Ranges:AC construction: 32o F to 125o F DC construction: 32o F to 104o F

ApprovalsCSA certified.UL listed General Purpose Valves.

Ordering InformationWe must have catalog number, voltage and Hertz.

10

UNIVERSAL OPERATION (Pressure at any port)

Air-InertGas Water

Lt. Oil@300SSU

Air-InertGas Water

Lt. Oil@300SSU

175 175 175 125 125 125

100 100 100 60 60 60

Max. FluidTemperature oF

AC DC

140 120

200 150

Standard Solenoid Enclosures

Catalog Number DC

Brass Body S.S. Body

8320G130

8320G174

8320G140

8320G200

9.1/ F

17.1/ F 11.6/ F

10.6/ F

3 way • Direct Acting

Subminiature Solenoid ValvesBrass or Stainless Steel Bodies • 1/8” NPT

4

8325SERIES

SolenoidMolded epoxy open frame solenoid whichcan be converted from AC to DC, or viceversa, by changing the coil. Can be usedto pilot 63 Operator Series 8290 valves.

ElectricalStandard voltages: 24, 120, 240 volts AC,60 Hz. ( or 110, 220 volts, AC, 50 HZ.) 6,12, 24, 120, 240, volts, DC

Other voltages are available whenrequired.

Coil Continuous duty molded Class F

Nominal Ambient TemperatureRanges:AC construction: 32o F to 125o FDC construction: 32o F to 77o F

ApprovalsCSA certified.UL Recognized Component.

PipeSize(ins.)

OrificeSize(ins.)

Cv Flow Factor

At Port “2”

At Port “3”

Air-InertGas

Air-InertGasWater

Lt. Oil@45SSU Water

Lt. Oil@45SSU AC DC

Operating Pressure Differential

Maximum AC Maximum DC

Max.Fl. Temp

o F

Open Frame Solenoid

Brass Body S.S. Body

Catalog No. Catalog No.

Watt Rating/Class of Coil

Insulation

AC DC

1/83/64 .05 .07 150 150 120 150 150 120 180 77 SC8325B5V SC8325B35V 6.3/F 6.9/F

NORMALLY CLOSED ( Closed when de-energized )

PILOT VALVES

Note: The 8325 series valves are suitable to pilot 50 and 63 operators.

Note: The 8320 series valves are suitable to pilot 50, 63 and 90 operators.

2 way • Auxiliary Pilot Operated • Normally Closed

Angle Body Soft Seated ValvesCast Iron Bodies • 3/4” to 1 1/2” NPT

4

8352SERIES

Pipe Size(Ins.)

Orifice Size(Ins.)

Cv FlowFactor Catalog Number

MaximumOperating Pressure

Differential (psi)

General DescriptionThese auxiliary-piloted, 2 way ASCO Series 8352 angle body soft seated valvesfeature an extra large Viton*disc which provides extendedservice life when handlingheavy slurries and metal cuttings.

The unique seat design permits compression of the disc material to providetight shut-off. This allows fluids, such as coolantscontaining sharp metal filings, to be handledwithout fear of damaging the seat seal.

Fluids pass under the seat, eliminating water hammer.

The solid actuator head is castiron and is bolted directly to thevalve body.

SpecificationsFluid Temperature Range:15o F to 180o FNominal AmbientTemperature Range:15o F to 150o FPressure Ratings:Differential Pressure: 0 to 70 psiMaximum Operating Pressure: 125 psiPilot Valves: Pilot Pressure Range:55 to 250 psi

Pilot Fluid: Filtered AirPilot Fluid Temperature Range:15o F to 150o F

Recommended Pilot Cv: 0.09 minimum

Valve Parts in Contact withFluids:Body: Cast Iron; Disc: Viton*;Actuator: Cast IronStem Seal: Viton* wiper and O-rings

Installation:Must be mounted with actuatorabove valve body.

SPECIFICATIONS

Remote Pilot Construction (Auxiliary Pressure Required: 55 psi)

DIMENSIONS mm (inches)

MaximumFluid Temperature

o F

3/4

1

1 1/41 1/2

1

1

1 1/21 1/2

9

11

24

27

70

70

40

40

180

180

180

180

835217

835218

835219

835220

A E H L P

95 (3 3/4)

95 (3 3/4)

109 (4 5/16)109 (4 5/16)

142 (5 19/32)

142 (5 19/32)

182 (7 5/32)

182 (7 5/32)

175 (6 29/32)

175 (6 29/32)

219 (8 5/8)

219 (8 5/8)

89 (3 1/2)

89 (3 1/2)

154 (6 1/16)

154 (6 1/16)

150 (5 29/32)

150 (5 29/32)

180 (7 3/32)

180 (7 3/32)

11

*DuPont Company trademark

Note: For greater selection of pilot valves, refer to ASCO full-line Catalog.

Dimensions

Alabama Birmingham, AL 35244 Tel (205) 988-8169 Fax (205) 988-9675 AlaskaContact Northern CA office Arizona Contact Southern CA office Arkansas Contact Eastern OK office California (Northern) Daly City, CA 94014 Tel (650) 985-2400 Fax (650) 985-2411California (Southern)Orange, CA 92868 Tel (714) 937-0811 Fax (714) 937-1390 Colorado Littleton, CO 80122 Tel (303) 779-6990 Fax (303) 773-0859 Connecticut (Northern)Contact Central/Northern NY officeConnecticut (Southern)Contact NJ office DelawareContact NJ office Florida Contact Alabama office, toll-free (800) 531-2019 Georgia Contact Alabama office Hawaii West Pacific Power Products, Inc. Honolulu, HI 96817 Tel (808) 522-0511Fax (808) 522-0513 Idaho (Northern) Contact Northern CA office Idaho (Southern) Contact Colorado office IllinoisWestmont, IL 60559 Tel (630) 789-4810 Fax (630) 789-4820 Indiana C. M. Buck & Associates, Inc. Indianapolis, IN 46268 Tel (317) 293-5704 Fax (317) 293-0281 Iowa (Eastern) Contact Illinois office, toll-free (800) 437-1416 Iowa (Western) Contact Colorado office Kansas Contact Colorado office Kentucky McNay Equipment Co. Louisville, KY 40299 Tel (502) 491-0333 Fax (502) 499-7149 Louisiana Contact Texas office MaineContact Northern NY officeMaryland Contact Southern NJ officeMassachusetts Contact Northern NY officeMichigan Southfield, MI 48076 Tel (248) 645-2620 Fax (248) 645-9696

Minnesota Plymouth, MN 55447 Tel (612) 577-0427 Fax (612) 577-0524 Mississippi Contact Alabama office Missouri (Eastern) Contact Illinois office, toll-free (800) 437-1416 Missouri (Western) Contact Colorado office MontanaContact Northern CA officeNebraska Contact Colorado office Nevada (Northern) Contact Northern CA officeNevada (Southern) Contact Southern CA officeNew Hampshire Contact Northern NY office New Jersey Marlton, NJ 08053 Tel (609) 985-8700 Fax (609) 985-5030 New Mexico Contact Southern CA office New York (Central/Northern) N. Syracuse, NY 13212 Tel (315) 453-3877 Fax (315) 453-3795 New York (Metropolitan) Contact NJ officeNorth CarolinaPL&E Sales, Inc. Charlotte, NC 28210 Tel (704) 366-9222 Fax (704) 366-9227 North Dakota Contact Minnesota office Ohio (Northen) Contact Michigan office Ohio (Southern) McNay Equipment Co., Inc. Cincinnati, OH 45242 Tel (513) 489-4770 Fax (513) 489-1470 OKLAHOMAAutomatic Engineering, Inc. Tulsa, OK 74120 Tel (918) 585-5703 Fax (918) 585-5707 Oregon Contact Northern CA office Pennsylvania (Eastern) Contact Southern NJ officePennsylvania (Western) Continental Sales & Engrg. Co. Pittsburgh, PA 15235 Tel (412) 241-5660 Fax (412) 243-1329 Rhode Island Contact Northern NY officeSouth Carolina Contact North Carolina officeSouth Dakota Contact Minnesota officeTennessee Contact Alabama office Texas Dallas, TX 75243 Tel (972) 699-1781 Fax (972) 669-9852 Utah Contact Colorado office

Vermont Contact Northern NY office Virginia (Northern) Contact Southern NJ office Virginia (Southern) Richmond, VA 23288 Tel (804) 282-3523 Fax (804) 282-3522 WashingtonContact Northern CA office West Virginia Contact Western PA office Wisconsin Milwaukee, WI 53217 Tel (414) 351-8400 Fax (414) 351-8404 Wyoming Contact Colorado office Caribbean (Puerto Rico)Mario R. Franceschini, Inc.San Juan, PR 00907 Tel (787) 725-7080Fax (787) 721-5762

CANADAMain Office ASCOLECTRIC Limited Brantford, Ontario N3T 5M8 Tel (519) 758-2700 Fax (519) 758-5540 British ColumbiaBurnaby, V5G 4E1Tel (604) 294-1767Fax (604) 294-9935

Alberta, Saskatchewan, andManitoba (incl. Thunder Bay) Calgary T2E 7L4Tel (403) 207-8571Fax (403) 207-8581

Ontario (excl. Ottawa Valley & Thunder Bay) Mississauga, L5N 1A6Tel (905) 821-2711Fax (905) 821-2780

Quebec & Ottawa Valley Saint Laurent, H4S 1P9Tel (514) 337-8520 Fax (514) 337-8771Atlantic Provinces Dartmouth, N.S. B3B 1W2Tel (902) 468-2559Fax (902) 468-1663

ManitobaWinnipeg, R2J OB8Tel (204) 233-0077Fax (204) 233-0777

MEXICOMain Office ASCOMATICA S.A. de C.V. Mexico, D.F. CP11700 Tel (52) 5-596-77-41 Fax (52) 5-596-77-19

BRAZILMain OfficeASCOVAL Ind. E. Com Ltda.São PauloTel (55) 11-7295-5333Fax (55) 11-7295-3970Grande Do SulPort Alegre 90550-004Tel (011) 55-51-343-4699Fax (011)55-51-343-4867

Sao PauloCampinas 13052-200Tel (011) 55-192-47-7755Fax (011)-55-192-47-2399

Minas GeraisBelo Horizonte 30430-680Tel (011) 55-31-332-5284Fax (011)-55-31-322-5284

Rio De JaneiroBonsucesso 21032-600Tel (011) 55-21-270-2290Fax (011)-55-21-270-2088ArgentinaASCO JoucomaticTel (54) 1-718-0322Fax (54)-1-797-4164

AROUND THE WORLDASCO EUROPEBelgiumASCO Joucomatic Benelux N.V. Tel (32) 2-333-0250Fax (32) 2-333-0251Czech Republic ASCO Joucomatic -S.R.O.Tel (420) 2-61-31-54-11Fax (420) 2-61-31-54-44EgyptASCO JoucomaticTel (20) 2-594-0797Fax (20) 2-355-0776FranceASCO Joucomatic S.A.Tel (33) 1-47-14-32-00Fax ((33) 1-47-14-30-64Germany ASCO Joucomatic GmbH Tel (49)-7237-9960Fax (49)-7237-9961

Hungary ASCO Magnesszelep Kft. Tel (36) 1-3874811Fax (36) 1-2502383

Italy Joucomatic S.P. A. Tel (39) 02-356931Fax (39) 02-35693300

Middle East ASCO Mideast, B.V. Tel (971) 6-723431Fax (971) 6-730850

Poland ASCO Joucomatic SP. Z0.0Tel (48) 22-673-0601Fax (48) 22-673-0134

PortugalASCO Joucomatic Fluido Control, S.A. Tel (351) 2-619-0857Fax (351) 2-619-0858South Africa ASCOREG (Pty.) LTD. Tel (27) 11-444-2213Fax (27) 11-444-2221

Spain ASCO Joucomatic Fluido Control, S.A. Tel (34) 942-87-6100Fax (34) 942-86-3323

Sweden ASCO AB Tel (46) 33-108000Fax (46) 33-108080

Switzerland ASCO JOUCOMATIC A.G.Tel (41) 32-373-7266Fax (41) 32-373-6046The NetherlandsASCO CONTROLS B.V. Tel (31) 33-277-7911Fax (31) 33-277-4561Turkey ASCO Joucomatic Tel (90)-216-464-0770Fax (90)-216-464-0771United Kingdom ASCO JOUCOMATIC LTD.Tel (44) 1695-724270Fax (44) 1695-729477

VenezuelaASCOMATICATel (58) 2-237-9036 ext.171Fax (58)-2-238-9023

ASCO ASIAAustralia ASCOMATION PTY., LTD. Tel (61) 2-9-451-7077Fax (61) 2-9-451-9924ChinaASCO Asia – Shanghai Tel (86-21) 6-282-6223Fax (86-21) 6-282-6077

ASCO Asia – Guangzhou Tel (86) 20-8732-1425Fax (86) 20-8732-1848

ASCO Asia – ChengduTel (86-28) 338-1496Fax ((86-28) 338-1494

ASCO Asia – Beijing Tel (86-10) 6-592-5321Fax (86-10) 6-592-5320Hong Kong ASCO Asia – Hong Kong Tel (852) 2-343-8580Fax (852) 2-790-1771IndiaASCO (India) Ltd.Tel (91) 44-496-0455Fax (91) 44-496-2270IndonesiaASCO Asia – IndonesiaTel (62-21) 575-0902Fax (62-21) 575-0936Japan ASCO Japan Co. LTD. Tel (81) 798-65-6361Fax (81) 798-63-4443Korea ASCO Asia – Korea Tel (82) 2-515-2485Fax (82) 2-540-3250MalaysiaASCO Asia – MalaysiaTel (60) 3-754-6811Fax (60) 3-754-1664Singapore ASCO Asia -Singapore Tel (65) 764-1218Fax (65) 762-1305Taiwan ASCO Asia – Taiwan Tel (886) 22-325-9555Fax (886) 22-702-6009

ASCO® Valve Product Offices Are Nearby

4 Valve - AmericasAutomatic Switch Co. (ASCO)

Hanover Road, Florham Park, NJ 07932Tel (973) 966-2000 Fax (973) 966-2628

website: www.ascovalve.com

ASCOLECTRIC LimitedBrantford, Ontario N3T 5M8

Tel (519) 758-2700 Fax (519) 758-5540

ASCOMATICA S. A. de C.V.Mexico City, D.F. CP11700

Tel (52) 5-596-77-41 Fax (52) 5-596-77-19

ASCOVAL Ind E Com Ltda.06465-300 Barueri, São Paulo, Brazil

Tel (55) 11-7295-5333 Fax (55) 11-7295-3970

© 89 MCMXCIX All Rights Reserved Printed in U.S.A. 10/99

Visit our Website:www.ascovalve.com

USA